1. Minor fixes to Exynos Chipid driver.
2. Add Exynos Adaptive Supply Voltage driver allowing to adjust voltages
used during CPU frequency scaling based on revision of SoC. This
also pulls dependency from PM/OPP tree - driver uses newly added
dev_pm_opp_adjust_voltage() function.
-----BEGIN PGP SIGNATURE-----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=t01z
-----END PGP SIGNATURE-----
Merge tag 'samsung-drivers-5.5' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into arm/drivers
Samsung soc drivers changes for v5.5
1. Minor fixes to Exynos Chipid driver.
2. Add Exynos Adaptive Supply Voltage driver allowing to adjust voltages
used during CPU frequency scaling based on revision of SoC. This
also pulls dependency from PM/OPP tree - driver uses newly added
dev_pm_opp_adjust_voltage() function.
* tag 'samsung-drivers-5.5' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
soc: samsung: exynos-asv: Potential NULL dereference in exynos_asv_update_opps()
soc: samsung: chipid: Drop "syscon" compatible requirement
soc: samsung: Add Exynos Adaptive Supply Voltage driver
PM / OPP: Support adjusting OPP voltages at runtime
soc: samsung: chipid: Make exynos_chipid_early_init() static
Link: https://lore.kernel.org/r/20191104175902.12224-1-krzk@kernel.org
Signed-off-by: Olof Johansson <olof@lixom.net>
Adds wake event support on Tegra210, implements the NVMEM API for the
Tegra FUSE block and adds coupled regulators support for Tegra20 and
Tegra30.
-----BEGIN PGP SIGNATURE-----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=CwCM
-----END PGP SIGNATURE-----
Merge tag 'tegra-for-5.5-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into arm/drivers
soc/tegra: Changes for v5.5-rc1
Adds wake event support on Tegra210, implements the NVMEM API for the
Tegra FUSE block and adds coupled regulators support for Tegra20 and
Tegra30.
* tag 'tegra-for-5.5-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
soc/tegra: pmc: Remove unnecessary memory barrier
soc/tegra: pmc: Query PCLK clock rate at probe time
soc/tegra: regulators: Add regulators coupler for Tegra30
soc/tegra: regulators: Add regulators coupler for Tegra20
soc/tegra: pmc: Configure deep sleep control settings
soc/tegra: pmc: Configure core power request polarity
soc/tegra: pmc: Add wake event support on Tegra210
soc/tegra: pmc: Support wake events on more Tegra SoCs
soc/tegra: fuse: Register cell lookups for compatibility
soc/tegra: fuse: Add cell information
soc/tegra: fuse: Implement nvmem device
soc/tegra: fuse: Restore base on sysfs failure
soc/tegra: pmc: Fix crashes for hierarchical interrupts
soc/tegra: fuse: Add FUSE clock check in tegra_fuse_readl()
Link: https://lore.kernel.org/r/20191102144521.3863321-4-thierry.reding@gmail.com
Signed-off-by: Olof Johansson <olof@lixom.net>
This contains a single fix for suspend/resume on Tegra194.
-----BEGIN PGP SIGNATURE-----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=lnZJ
-----END PGP SIGNATURE-----
Merge tag 'tegra-for-5.5-firmware' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into arm/drivers
firmware: tegra: Changes for v5.5-rc1
This contains a single fix for suspend/resume on Tegra194.
* tag 'tegra-for-5.5-firmware' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
firmware: tegra: Move BPMP resume to noirq phase
Link: https://lore.kernel.org/r/20191102144521.3863321-2-thierry.reding@gmail.com
Signed-off-by: Olof Johansson <olof@lixom.net>
* 'for_5.5/driver-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/ssantosh/linux-keystone:
memory: emif: remove set but not used variables 'cs1_used' and 'custom_configs'
soc: ti: omap-prm: fix return value check in omap_prm_probe()
soc: ti: omap-prm: add omap5 PRM data
soc: ti: omap-prm: add am4 PRM data
soc: ti: omap-prm: add dra7 PRM data
soc: ti: omap-prm: add data for am33xx
soc: ti: omap-prm: add omap4 PRM data
soc: ti: omap-prm: add support for denying idle for reset clockdomain
soc: ti: omap-prm: poll for reset complete during de-assert
soc: ti: add initial PRM driver with reset control support
dt-bindings: omap: add new binding for PRM instances
Link: https://lore.kernel.org/r/1572372856-20598-1-git-send-email-santosh.shilimkar@oracle.com
Signed-off-by: Olof Johansson <olof@lixom.net>
Add support for the power areas in the Renesas R-Car M3-W+ (R8A77961)
SoC to the R-Car System Controller driver.
R-Car M3-W+ (aka R-Car M3-W ES3.0) is very similar to R-Car
M3-W (R8A77960), which allows for both SoCs to share a driver:
- R-Car M3-W+ lacks the A2VC power area, so its area must be
nullified,
- The existing support for the SYSCEXTMASK register added in commit
9bd645af9d2a49ac ("soc: renesas: r8a7796-sysc: Fix power request
conflicts") applies to ES3.0 and later only.
As R-Car M3-W+ uses a different compatible value, differentiate
based on that, instead of on the ES version.
Based on a patch in the BSP by Dien Pham <dien.pham.ry@renesas.com>.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Tested-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Link: https://lore.kernel.org/r/20191023123342.13100-7-geert+renesas@glider.be
Add support for the Reset block in the R-Car M3-W+ (R8A77961) SoC to the
Renesas R-Car RST driver.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Tested-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Link: https://lore.kernel.org/r/20191023123342.13100-6-geert+renesas@glider.be
Add support for identifying the R-Car M3-W+ (R8A77961) SoC, which shares
the Product ID Number with R-Car M3-W (R8A77960), but differs in CUT
Number (Ver. 3.0), and uses a different compatible value.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Tested-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Link: https://lore.kernel.org/r/20191023123342.13100-5-geert+renesas@glider.be
Add CONFIG_ARCH_R8A77961 as a configuration symbol for the new Renesas
R-Car M3-W+ (R8A77961) SoC.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Tested-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Link: https://lore.kernel.org/r/20191023123342.13100-4-geert+renesas@glider.be
Add CONFIG_ARCH_R8A77960 as a new config symbol for R-Car M3-W
(R8A77960), to replace CONFIG_ARCH_R8A7796, and avoid confusion with
R-Car M3-W+ (R8A77961), which will use CONFIG_ARCH_R8A77961.
Note that for now, CONFIG_ARCH_R8A7796 is retained, and just selects
CONFIG_ARCH_R8A77960. This relaxes dependencies of other subsystems on
the SoC configuration symbol, and provides a smooth transition path for
config files through "make oldconfig".
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Link: https://lore.kernel.org/r/20191023123342.13100-3-geert+renesas@glider.be
Rename CONFIG_SYSC_R8A7796 for R-Car M3-W (R8A77960) to
CONFIG_SYSC_R8A77960, to avoid confusion with R-Car M3-W+ (R8A77961),
which will use CONFIG_SYSC_R8A77961.
Rename r8a7796_sysc_info and r8a7796_sysc_init for consistency.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Link: https://lore.kernel.org/r/20191023123342.13100-2-geert+renesas@glider.be
Clock and Power Domain definitions for the Renesas R-Car M3-W+
(R8A77961) SoC, shared by driver and DT source files.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQQ9qaHoIs/1I4cXmEiKwlD9ZEnxcAUCXbwQzAAKCRCKwlD9ZEnx
cGA2AQDvA8Uaf/WQ1zzq5GgHPB6R35ciBFCVn3AG+6izUqsCPAEA0FGEHsrNtWyG
rcJ+C/8vBJ+Pe359DmXaELorJ4Xm6wQ=
=EV4L
-----END PGP SIGNATURE-----
Merge tag 'renesas-r8a77961-dt-binding-defs-tag' into renesas-drivers-for-v5.5
Renesas R-Car M3-W+ DT Binding Definitions
Clock and Power Domain definitions for the Renesas R-Car M3-W+
(R8A77961) SoC, shared by driver and DT source files.
If the DTB for a device with an RZ/A2 SoC lacks a device node for the
BSID register, the ID validation code falls back to using a register at
address 0x0, which leads to undefined behavior (e.g. reading back a
random value).
This could be fixed by letting fam_rza2.reg point to the actual BSID
register. However, the hardcoded fallbacks were meant for backwards
compatibility with old DTBs only, not for new SoCs. Hence fix this by
validating renesas_family.reg before using it.
Fixes: 175f435f44 ("soc: renesas: identify RZ/A2")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20191016143306.28995-1-geert+renesas@glider.be
Add all Clock Pulse Generator Core Clock Outputs for the Renesas R-Car
M3-W+ (R8A77961) SoC, as listed in Table 8.2b ("List of Clocks [R-Car
M3-W/R-Car M3-W+]") of the R-Car Series, 3rd Generation Hardware User's
Manual (Rev. 2.00, Jul. 31, 2019). A gap is added for CSIREF, to
preserve compatibility with the definitions for R-Car M3-W (R8A77960).
Note that internal CPG clocks (S0, S1, S2, S3, SDSRC, SSPSRC, and POST2)
are not included, as they are used as internal clock sources only, and
never referenced from DT.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20191023122941.12342-3-geert+renesas@glider.be
Add power domain indices for the R-Car M3-W+ (R8A77961) SoC.
Based on Rev. 2.00 of the R-Car Series, 3rd Generation, Hardware User’s
Manual (Jul. 31, 2019).
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Eugeniu Rosca <erosca@de.adit-jv.com>
Link: https://lore.kernel.org/r/20191023122911.12166-6-geert+renesas@glider.be
The dev_pm_opp_get_opp_table() returns error pointers if it's disabled
in the config and it returns NULL if there is an error. This code only
checks for error pointers so it could lead to an Oops inside the
dev_pm_opp_put_opp_table() function.
Fixes: 5ea428595c ("soc: samsung: Add Exynos Adaptive Supply Voltage driver")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
drivers/memory/emif.c:1616:9: warning:
variable cs1_used set but not used [-Wunused-but-set-variable]
drivers/memory/emif.c:1624:36: warning:
variable custom_configs set but not used [-Wunused-but-set-variable]
They are never used since introduction.
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Santosh Shilimkar <santosh.shilimkar@oracle.com>
In case of error, the function devm_ioremap_resource() returns ERR_PTR()
and never returns NULL. The NULL test in the return value check should
be replaced with IS_ERR().
Fixes: 3e99cb214f ("soc: ti: add initial PRM driver with reset control support")
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Signed-off-by: Santosh Shilimkar <santosh.shilimkar@oracle.com>
The removed barrier isn't needed because writes/reads are strictly ordered
and even if PMC had separate ports for writes, it wouldn't matter since
the hardware logic takes into effect after triggering CPU's power-gating
and at that point all CPU accesses are guaranteed to be completed. That
barrier was copied from the old arch/ code during transition to the soc/
PMC driver and even that the code structure was different back then, the
barrier didn't have a real useful purpose from the start. Lastly, the
tegra_pmc_writel() naturally inserts wmb() because it uses writel(),
and thus this change doesn't actually make any difference in terms of
interacting with hardware. Hence let's remove the barrier to clean up
code a tad.
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
It is possible to get a lockup if kernel decides to enter LP2 cpuidle
from some clk-notifier, in that case CCF's "prepare" mutex is kept locked
and thus clk_get_rate(pclk) blocks on the same mutex with interrupts being
disabled, hanging machine.
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Acked-By: Peter De Schrijver <pdeschrijver@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Add regulators coupler for Tegra30 SoCs that performs voltage balancing
of a coupled regulators and thus provides voltage scaling functionality.
There are 2 coupled regulators on all Tegra30 SoCs: CORE and CPU. The
coupled regulator voltages shall be in a range of 300mV from each other
and CORE voltage shall be higher than the CPU by N mV, where N depends
on the CPU voltage.
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Acked-By: Peter De Schrijver <pdeschrijver@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Add regulators coupler for Tegra20 SoCs that performs voltage balancing
of a coupled regulators and thus provides voltage scaling functionality.
There are 3 coupled regulators on all Tegra20 SoCs: CORE, RTC and CPU.
The CORE and RTC voltages shall be in range of 170mV from each other and
they both shall be higher than the CPU voltage by at least 120mV. This
sounds like it could be handle by a generic voltage balancer, but the CORE
voltage scaling isn't implemented in any of the upstream drivers yet.
It will take quite some time and effort to hook up voltage scaling for
all of the drivers, hence we will use a custom coupler that will manage
the CPU voltage scaling for the starter.
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Acked-By: Peter De Schrijver <pdeschrijver@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Tegra210 and prior Tegra chips have deep sleep entry and wakeup related
timings which are platform specific that should be configured before
entering into deep sleep.
Below are the timing specific configurations for deep sleep entry and
wakeup.
- Core rail power-on stabilization timer
- OSC clock stabilization timer after SOC rail power is stabilized.
- Core power off time is the minimum wake delay to keep the system
in deep sleep state irrespective of any quick wake event.
These values depends on the discharge time of regulators and turn OFF
time of the PMIC to allow the complete system to finish entering into
deep sleep state.
These values vary based on the platform design and are specified
through the device tree.
This patch has implementation to configure these timings which are must
to have for proper deep sleep and wakeup operations.
Signed-off-by: Sowjanya Komatineni <skomatineni@nvidia.com>
Reviewed-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
This patch configures polarity of the core power request signal
in PMC control register based on the device tree property.
PMC asserts and de-asserts power request signal based on it polarity
when it need to power-up and power-down the core rail during SC7.
Reviewed-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Sowjanya Komatineni <skomatineni@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
This patch implements PMC wakeup sequence for Tegra210 and defines the
commonly used RTC alarm wake event.
Signed-off-by: Sowjanya Komatineni <skomatineni@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
This patch allows to create separate irq_set_wake and irq_set_type
implementations for different Tegra designs PMC that has different
wake models which require difference wake registers and different
programming sequence.
AOWAKE model support is available for Tegra186 and Tegra194 only
and it resides within PMC and supports tiered wake architecture.
Tegra210 and prior Tegra designs uses PMC directly to receive wake
events and coordinate the wake sequence.
Reviewed-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Sowjanya Komatineni <skomatineni@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
As we dropped the requirement of "syscon" compatible in the chipid
nodes rework code acquiring the regmap to use device_node_to_regmap()
rather than syscon_node_to_regmap().
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
The Adaptive Supply Voltage (ASV) driver adjusts CPU cluster operating
points depending on exact revision of an SoC retrieved from the CHIPID
block or the OTP memory. This allows for some power saving as for some
CPU clock frequencies we can lower CPU cluster's supply voltage comparing
to safe values common to all the SoC revisions.
This patch adds support for Exynos5422/5800 SoC, it is partially based
on code from https://github.com/hardkernel/linux repository,
branch odroidxu4-4.14.y, files: arch/arm/mach-exynos/exynos5422-asv.[ch].
Tested on Odroid XU3, XU4, XU3 Lite.
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
This tag adds support for Meson SM1 ARB resets, Uniphier Pro5 USB3
resets, the Meson-A1 reset controller, SocFPGA Agilex resets, and
Realtek RTD1195/RTD1295 resets.
It adds some reset controller API keywords for get_maintainers.pl and
makes a few remaining reset_control_ops const. Also included are
a conversion of the Qualcomm device tree bindings to yaml and a few
small kerneldoc improvements.
-----BEGIN PGP SIGNATURE-----
iI0EABYIADUWIQRRO6F6WdpH1R0vGibVhaclGDdiwAUCXbbwUxcccC56YWJlbEBw
ZW5ndXRyb25peC5kZQAKCRDVhaclGDdiwEKeAP498UhJ8+GB8PUCpRIPAmFwjAON
n+2EFHTn5Od08ueqqAEA4SH13tR5PJBo6G/J6KgLULUFts4Uc/Hb760/2ai3eQw=
=eyHx
-----END PGP SIGNATURE-----
Merge tag 'reset-for-v5.5' of git://git.pengutronix.de/git/pza/linux into arm/drivers
Reset controller updates for v5.5
This tag adds support for Meson SM1 ARB resets, Uniphier Pro5 USB3
resets, the Meson-A1 reset controller, SocFPGA Agilex resets, and
Realtek RTD1195/RTD1295 resets.
It adds some reset controller API keywords for get_maintainers.pl and
makes a few remaining reset_control_ops const. Also included are
a conversion of the Qualcomm device tree bindings to yaml and a few
small kerneldoc improvements.
* tag 'reset-for-v5.5' of git://git.pengutronix.de/git/pza/linux:
reset: document (devm_)reset_control_get_optional variants
reset: improve of_xlate documentation
reset: simple: Add Realtek RTD1195/RTD1295
reset: simple: Keep alphabetical order
MAINTAINERS: add reset controller framework keywords
reset: zynqmp: Make reset_control_ops const
reset: hisilicon: hi3660: Make reset_control_ops const
reset: build simple reset controller driver for Agilex
reset: add support for the Meson-A1 SoC Reset Controller
dt-bindings: reset: add bindings for the Meson-A1 SoC Reset Controller
reset: uniphier-glue: Add Pro5 USB3 support
dt-bindings: reset: pdc: Convert PDC Global bindings to yaml
dt-bindings: reset: aoss: Convert AOSS reset bindings to yaml
reset: Remove copy'n'paste redundancy in the comments
reset: meson-audio-arb: add sm1 support
reset: dt-bindings: meson: update arb bindings for sm1
Link: https://lore.kernel.org/r/ede6874508472d0917dca770ef80b90626b0f205.camel@pengutronix.de
Signed-off-by: Olof Johansson <olof@lixom.net>
Enable RESET_SIMPLE for ARCH_REALTEK.
They can reuse the DesignWare bindings to avoid a new compatible.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Restore alphabetical order for Kconfig dependencies and help text.
Compatibles got out of order too, but no functional change done here.
Goal is to make it obvious where to add new platforms.
Fixes: 64c47b624f ("reset: Add reset controller support for BM1880 SoC")
Fixes: 1d7592f84f ("reset: simple: Enable for ASPEED systems")
Fixes: 96a2f50305 ("reset: build simple reset controller driver for Agilex")
Cc: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
updates for 5.5, please pull the following:
- Markus updates the DPFE driver so as to support deferring the firmware
loading process until the first sysfs attribute is accessed, in the
process he does a bunch of cleanups and minor fixes
- Florian adds support for the DPFE on 7211 which uses a "new style" API
v2 and makes necessary changes along the way
-----BEGIN PGP SIGNATURE-----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=rU3w
-----END PGP SIGNATURE-----
Merge tag 'arm-soc/for-5.5/drivers' of https://github.com/Broadcom/stblinux into arm/drivers
This pull request contains Broadcom ARM/ARM64/MIPS based SoCs drivers
updates for 5.5, please pull the following:
- Markus updates the DPFE driver so as to support deferring the firmware
loading process until the first sysfs attribute is accessed, in the
process he does a bunch of cleanups and minor fixes
- Florian adds support for the DPFE on 7211 which uses a "new style" API
v2 and makes necessary changes along the way
* tag 'arm-soc/for-5.5/drivers' of https://github.com/Broadcom/stblinux:
memory: brcmstb: dpfe: Fixup API version/commands for 7211
memory: brcmstb: dpfe: Compute checksum at __send_command() time
memory: brcmstb: dpfe: support for deferred firmware download
memory: brcmstb: dpfe: pass *priv as argument to brcmstb_dpfe_download_firmware()
memory: brcmstb: dpfe: move init_data into brcmstb_dpfe_download_firmware()
memory: brcmstb: dpfe: add locking around DCPU enable/disable
memory: brcmstb: dpfe: initialize priv->dev
memory: brcmstb: dpfe: rename struct private_data
Link: https://lore.kernel.org/r/20191023212814.30622-2-f.fainelli@gmail.com
Signed-off-by: Olof Johansson <olof@lixom.net>
A series of changes from Tero Kristo for rpm reset control
driver to deal with the ordering requirements between clocks
and resets, and two changes to deal with quirks for musb otg
device.
-----BEGIN PGP SIGNATURE-----
iQJFBAABCAAvFiEEkgNvrZJU/QSQYIcQG9Q+yVyrpXMFAl2wk4URHHRvbnlAYXRv
bWlkZS5jb20ACgkQG9Q+yVyrpXNsgA//eGNfveY1+W1+4bzDIbNyrfeFe7KJ/znb
dHlF/RMBpsVOAjrZkjmn+lo9D+j+r9XiVt9GZDwUkQoG/vFOdraALK9+5KnF7aF6
ej9UgWLCg+A6y14+4QsyWvikKmhgrbuHqga08q82YOV+C9F765B+ihJeBLNFUzXC
S/a19M03af+4qekRWLLPYale3Prpu+ifVG6hBH2+HP6g90VcwQFZh46H9vBzHBEo
agahVUEWU1RMEZfFGl8U879e3XJhS80jpzn2I9SKFNuDQt4BS1oApiUCLxTbD1z4
licc2VezxlTlF1Z1bQiwJD7eIUvLA6o0YeZr2x7WsBN98S6kEj/114ubtbDuQZUh
MBu3GCKAB1RWkLcYMvbyPMi04xzQc3+m2xXQnn6DxCYiqeqiJ9t4rs/hru/FP1QW
271pgdCHud1Sx0oU/y+mCyseg77hYW3hK18sG5M3Rcggv3LoLmF57jiDEigUwx2y
r/J5eH5N6myIB9d4b4NwEdYgcsc1Uq6+3skx2SZChFWMyHU/9y9v7nyloQjq2N68
mW2+xtB9OFe/qgGH/vWU0FVuDSIaQY1uKK7Xy5kN+CaEckms4rUWH2v789CCHB7Y
mHvj4jfzZ9BgBhjBHE8WN/a/mE6rL87m0yQaobjwGi8drwpajgeIdBvTn+87AWvd
ndT4BFW9los=
=5ddL
-----END PGP SIGNATURE-----
Merge tag 'omap-for-v5.5/ti-sysc-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into arm/drivers
Changes for ti-sysc interconnect target module driver for v5.5
A series of changes from Tero Kristo for rpm reset control
driver to deal with the ordering requirements between clocks
and resets, and two changes to deal with quirks for musb otg
device.
* tag 'omap-for-v5.5/ti-sysc-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
bus: ti-sysc: Use swsup quirks also for am335x musb
bus: ti-sysc: Handle mstandby quirk and use it for musb
bus: ti-sysc: Fix watchdog quirk handling
bus: ti-sysc: avoid toggling power state of module during probe
bus: ti-sysc: drop the extra hardreset during init
bus: ti-sysc: re-order reset and main clock controls
Link: https://lore.kernel.org/r/pull-1571853258-16998@atomide.com-2
Signed-off-by: Olof Johansson <olof@lixom.net>
The zynqmp_reset_ops structure is never modified. Make it const.
Acked-by: Michal Simek <michal.simek@xilinx.com>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
The Intel SoCFPGA Agilex platform shares the same reset controller that
is on the Stratix10.
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
On some SoCs the Adaptive Voltage Scaling (AVS) technique is
employed to optimize the operating voltage of a device. At a
given frequency, the hardware monitors dynamic factors and either
makes a suggestion for how much to adjust a voltage for the
current frequency, or it automatically adjusts the voltage
without software intervention. Add an API to the OPP library for
the former case, so that AVS type devices can update the voltages
for an OPP when the hardware determines the voltage should
change. The assumption is that drivers like CPUfreq or devfreq
will register for the OPP notifiers and adjust the voltage
according to suggestions that AVS makes.
This patch is derived from [1] submitted by Stephen.
[1] https://lore.kernel.org/patchwork/patch/599279/
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Roger Lu <roger.lu@mediatek.com>
[s.nawrocki@samsung.com: added handling of OPP min/max voltage]
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Since this driver is enabled for COMPILE_TEST, it avoids build error
on x86 allmodconfig:
In file included from /build/drivers/phy/marvell/phy-mmp3-usb.c:12:
/build/include/linux/soc/mmp/cputype.h:5:10: fatal error: asm/cputype.h: No such file or directory
Link: https://lore.kernel.org/r/20191022015658.14624-1-olof@lixom.net
Signed-off-by: Olof Johansson <olof@lixom.net>
This tag includes the MMP3 USB2 PHY driver. The branch is based on
mmp-soc-for-v5.5-2 because the driver depends on changes in MMP SoC
support.
-----BEGIN PGP SIGNATURE-----
iQFDBAABCAAtFiEENyn6vISEy07peidTpxZjkszkJRYFAl2ofwsPHGxrdW5kcmFr
QHYzLnNrAAoJEKcWY5LM5CUWzYsH/iLvSgoDVR+TLxEYQJcpdCCC3tfxBUDYrCvA
hfpf7SuaNHexgrqSl194eoMJ8nmnvcEimGrj3Xgr1iJXge4ECv/fti+aQT1rOUOL
EThqYPDQennCEjfNFBJVAk7mLSHVjrN0d4ItTl11Oxk38rYQFtlq2Z0gNOVU2eJG
n8Orbkwxck2ILDnYfWodPnYAZXa5FOozdp7zOP1sGRztohLTY6JG1vCC++ylM3T3
1HxxwVxGNDzLsgjs/R4A4eSmmHIPQ0BlGi6QCJOcqmXGYelUDPHNnDpo58itC7sQ
D2ClZkEKDqdE4uheknUe+q/gzya6eALqwaBsVVYhBZmLSMBLdgQ=
=3qa/
-----END PGP SIGNATURE-----
Merge tag 'mmp-drivers-for-v5.5' of git://git.kernel.org/pub/scm/linux/kernel/git/lkundrak/linux-mmp into arm/drivers
ARM: Marvell MMP driver patches for v5.5
This tag includes the MMP3 USB2 PHY driver. The branch is based on
mmp-soc-for-v5.5-2 because the driver depends on changes in MMP SoC
support.
* tag 'mmp-drivers-for-v5.5' of git://git.kernel.org/pub/scm/linux/kernel/git/lkundrak/linux-mmp:
MAINTAINERS: phy: add entry for USB PHY drivers on MMP SoCs
phy: Add USB2 PHY driver for Marvell MMP3 SoC
MAINTAINERS: mmp: add Git repository
ARM: mmp: remove MMP3 USB PHY registers from regs-usb.h
ARM: mmp: move cputype.h to include/linux/soc/
ARM: mmp: add SMP support
ARM: mmp: add support for MMP3 SoC
ARM: mmp: define MMP_CHIPID by the means of CIU_REG()
ARM: mmp: DT: convert timer driver to use TIMER_OF_DECLARE
ARM: mmp: map the PGU as well
ARM: mmp: don't select CACHE_TAUROS2 on all ARCH_MMP
ARM: l2c: add definition for FWA in PL310 aux register
Link: https://lore.kernel.org/r/7cee3ddbb553ba7fe6e1420e0dbc5adb4922b317.camel@v3.sk
Signed-off-by: Olof Johansson <olof@lixom.net>
Add Samsung Dynamic Memory Controller for Exynos5422 which provides
scaling of frequency and voltage of memory controller and DRAM. The
driver allows to reduce energy usage without performance impact.
-----BEGIN PGP SIGNATURE-----
iQJEBAABCgAuFiEE3dJiKD0RGyM7briowTdm5oaLg9cFAl2t8FkQHGtyemtAa2Vy
bmVsLm9yZwAKCRDBN2bmhouD1+wZD/9O3cKcO2T5WmDw0sZt+a7LZBbm2nCCZNk1
v+aHTYbjYEfgSfPaCHbGNjC2HjHN+ThyY3f4UyPkG3WEsRvu2DTio7RjXWGNJHQg
rQ4c4sZU+5if0nXjw6QG3jtOj0q77q4XYgX9hg3Xl1hab7f8MjrhxvuRGkHIumzI
SRCSVi3L4K93YTKqDa/Z1xQtCOuXDtTtnAdy2iY4YY8JE9mRgHlGKlcgdWXPlXia
Fo0K9nGXOsRmA25twlqnA7ZkRh18PGQMC85o8vccqt39DOyUVwylwduvSPKosWsX
bn6LwpaYwAAj2nd65evRXs5W8EHx8ODGVEmELNYiVV0bLu3eaxKyynI/F5BxGuPO
ZYa2+BqG7TSHIJbb/6siYKZOhf8FRKRapjWy3Rx0oMK/pr0yGjmVyQDSp2lRvYk4
lUOm3d9IV5u3YNHgdiEdsiVSGEFK2enk7C2Lq/0++FkhT4GzRkJ13kj53fJxQxN/
xAs7L8mEpSqcFJMDoUjUOYCeNmJhNjkYVDG32I/quL2wtl8GQVOgty7sRwJBTDv5
6gRCfBU2xBjSWuWCRT7O4z2bpW2V5TaqYiCNvivFbWpE/z7G1Z0z/iQalgYoVxZs
ztuuizkGuKcZAl1EA8DTmA5/Hk4uo2BirOxfsRZy5CLjukbUp+lh7S0mzC0+su70
hhNtFpRWdQ==
=+imO
-----END PGP SIGNATURE-----
Merge tag 'samsung-drivers-dmc-5.5' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into arm/drivers
Samsung DMC driver for v5.5
Add Samsung Dynamic Memory Controller for Exynos5422 which provides
scaling of frequency and voltage of memory controller and DRAM. The
driver allows to reduce energy usage without performance impact.
* tag 'samsung-drivers-dmc-5.5' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
memory: samsung: exynos5422-dmc: Add support for interrupt from performance counters
memory: samsung: exynos5422-dmc: Fix kfree() of devm-allocated memory and missing static
memory: samsung: exynos5422-dmc: Fix spelling mistake "counld" -> "could"
memory: Add DMC driver for Exynos5422
memory: Extend of_memory with LPDDR3 support
Link: https://lore.kernel.org/r/20191021180453.29455-3-krzk@kernel.org
Signed-off-by: Olof Johansson <olof@lixom.net>
- Add support for the new RZ/G2N (r8a774b1) SoC,
- Fix System Controller power request conflicts on recent R-Car Gen3
and RZ/G2N SoC variants and revisions,
- Minor cleanups.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQQ9qaHoIs/1I4cXmEiKwlD9ZEnxcAUCXamFLgAKCRCKwlD9ZEnx
cGnyAQCxC1CTx22PDC48s8MXx6nCeMosWPwu6wAlEYh2V6ILUgD/Q3TUg8NKwkDd
vMYoU2w7TbzbIkQGe8uH6W6an+lG7wM=
=cdcf
-----END PGP SIGNATURE-----
Merge tag 'renesas-drivers-for-v5.5-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel into arm/drivers
Renesas driver updates for v5.5
- Add support for the new RZ/G2N (r8a774b1) SoC,
- Fix System Controller power request conflicts on recent R-Car Gen3
and RZ/G2N SoC variants and revisions,
- Minor cleanups.
* tag 'renesas-drivers-for-v5.5-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel:
soc: renesas: rcar-sysc: Add r8a774b1 support
soc: renesas: rcar-sysc: Remove unneeded inclusion of <linux/bug.h>
soc: renesas: r8a774c0-sysc: Fix power request conflicts
soc: renesas: rcar-rst: Add support for RZ/G2N
soc: renesas: Identify RZ/G2N
soc: renesas: Add Renesas R8A774B1 config option
soc: renesas: r8a77990-sysc: Fix power request conflicts
soc: renesas: r8a77980-sysc: Fix power request conflicts
soc: renesas: r8a77970-sysc: Fix power request conflicts
soc: renesas: r8a77965-sysc: Fix power request conflicts
soc: renesas: r8a7796-sysc: Fix power request conflicts
soc: renesas: r8a7795-sysc: Fix power request conflicts
soc: renesas: rcar-sysc: Prepare for fixing power request conflicts
dt-bindings: clk: Add r8a774b1 CPG Core Clock Definitions
dt-bindings: power: Add r8a774b1 SYSC power domain definitions
Link: https://lore.kernel.org/r/20191018101136.26350-5-geert+renesas@glider.be
Signed-off-by: Olof Johansson <olof@lixom.net>
7211 uses a newer version of API v2 which is half way between what was
defined as API v3 and what used to be called API v2 but was used with
DPFE firmwares with major versions 1.x.x.x. Starting with **the new**
API v2, we are no longer getting loadable firmware images, so the
capability to load it is removed (like v3).
To avoid spreading more confusion, map 7268/7271/7278 to the old DPFE
API version 2, 7211 to the new API v2 and introduce the specific
commands for that, and leave newer versions to map to API v3.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Markus Mayer <mmayer@broadcom.com>
Instead of pre-computing the checksum, do it at the time we send the
command, this reduces the possibility of introducing errors as well as
limits the amount of code necessary while adding new commands and/or new
API versions. The MSG_CHKSUM enumeration value is no longer necessary
and is removed.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Markus Mayer <mmayer@broadcom.com>
We add support for deferred downloading of the DPFE firmware. It may be
necessary to do this if the root file system containing the firmware
image is not yet available at the time the driver's probe function is
being called.
Signed-off-by: Markus Mayer <mmayer@broadcom.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
