-----BEGIN PGP SIGNATURE-----
iQFHBAABCgAxFiEEIbPD0id6easf0xsudhRwX5BBoF4FAmqPVgsTHHdlaS5saXVA
a2VybmVsLm9yZwAKCRB2FHBfkEGgXhzaB/4k6+7PbPA0xM7C+1Nu7mU1XKNnc1Ep
TSiDrrxCEXFJH1SK65yXhsd3TPmgF/rLB0hLBTg23Xts1hDiL6/Hwk9Xne25NaFJ
VxvBNqOwgda2n1o1yk2m1KIVp4c2S5CTnICI/ka/gQph27kgj006px7G/ZOjRG+M
5+EMk4vc5xYKb9J3QHvyNoiKBwv0uNWlJkX5Ali4NB+pE/KO92rpY45DefpEZNrO
Rv4RUtK9PFE0lzY6EcYiZ5zAPF4SOTzTqyTZsg6HMgTLv1G4JAD7cRlXP1sPN9YQ
KJijoZ1C7b4Ih75m8xv4tdumxTvu7LCfZoiBhn3V9+H/SXWe2WquaFOt
=yZjb
-----END PGP SIGNATURE-----
Merge tag 'hyperv-next-signed-20260826' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux
Pull hyperv updates from Wei Liu:
- Decrypt netvsc buffer on contiguous direct-map addresses (Kameron
Carr)
- Drop WS2012/2012R2 & Win8/8.1 Hyper-V support (Michael Kelley)
- Use more meaningful errnos for hypercall status code (Hardik Garg)
- Fix lost interrupts on CPU hot-unplug for Hyper-V PCI/MSI (Naman
Jain)
- Reserve more MSHV vectors for Linux root partition (Wei Liu)
* tag 'hyperv-next-signed-20260826' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux:
clocksource: hyper-v: Remove support for stimer interrupts in message mode
scsi: storvsc: Remove support for storvsc protocol of old Hyper-V hosts
hv_netvsc: Remove GPADL teardown special case for old Hyper-V hosts
hv_sock: Remove check for old Hyper-V hosts
Drivers: hv: Remove support for WS2012/2012R2 & Win8/8.1 version of Hyper-V
hv_netvsc: Allocate send/receive buffers using vmbus_alloc_buffer()
Drivers: hv: vmbus: Add vmbus_alloc_buffer()/vmbus_free_buffer() for CoCo VMs
Drivers: hv: vmbus: add vmbus_establish_gpadl_caller_decrypted()
Drivers: hv: vmbus: Skip VMBus module cleanup for non-nested root partition
x86/hyperv: reserve more vectors
PCI: hv: Set irq_retrigger callback for the Hyper-V PCI MSI irqchip
Drivers: hv: Use meaningful errnos for hypercall status codes
With the overall removal of Linux support for running on Hyper-V
hosts earlier than WS2016 and Windows 10, it's no longer necessary
to support older storvsc protocols. Remove the support and associated
special case code. However, support for the protocol for Windows
Server 2012R2 and Win8.1 (protocol version 6.0) is *not* removed
because it is activiely used by HvLite in the paravisor for Azure VMs.
Signed-off-by: Michael Kelley <mhklinux@outlook.com>
Signed-off-by: Wei Liu <wei.liu@kernel.org>
-----BEGIN PGP SIGNATURE-----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=cNUI
-----END PGP SIGNATURE-----
Merge tag 'pci-v7.3-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci
Pull PCI updates from Bjorn Helgaas:
"Resource management:
- Add hotplug reservation only once (not at each level of the
hierarchy) so bridge windows don't grow more than necessary (Ilpo
Järvinen)
Driver binding:
- Rework device matching so device ID lifetime only needs to cover
the probe path since dynamic IDs can be removed at any time (Gary
Guo)
Error handling:
- Update mappings of AER errors to agent & layer and log them for
each individual error when multiple errors detected (Lukas Wunner)
- Log Error Source only once, not twice in separate messages (Lukas
Wunner)
- Emit TLP Log only for unmasked errors (Lukas Wunner)
- Support Advisory Non-Fatal Errors (Lukas Wunner)
- Allow DPC on all Downstream Ports, not just Root Ports, when OS
controls AER (Darshit Shah)
ASPM:
- Program the same ASPM Control values for every function of
multi-function devices, as recommended by the PCIe spec (Krishna
Chaitanya Chundru)
- Avoid L0s for Realtek RTS525A, where it causes an AER interrupt
storm (Max Lee)
- Avoid ASPM L0s, L1, and L1 PM Substates based on 'aspm-no-l0s',
'aspm-no-l1' [1], and 'aspm-no-l1ss' DT properties (Krishna
Chaitanya Chundru)
Power management:
- Allow D3 for native hotplug-capable Root Ports on non-x86 platforms
(we avoid D3 for these ports on x86 because some old platforms
didn't validate it) (Manivannan Sadhasivam)
- Allow portdrv to claim Ports even if they don't support services
(AER, PME, DPC, hotplug, etc) so it can do power management (Brian
Norris)
Power control:
- Add support for PCIe WAKE# interrupt when described via DT (Krishna
Chaitanya Chundru)
- For the TC9563 PCIe switch:
- Take a reference on the I2C adapter to avoid uninterruptible
hang when unloading an I2C module while in-use (Johan Hovold)
- Update DT binding and driver to restrict Tx Amplitude, DFE and
N_FTS to USP, DSP1 and DSP2 (Manivannan Sadhasivam)
- Power off only external-facing ports (DSP1, DSP2), leaving USP
and DSP3 (aka VDSP) powered up (Manivannan Sadhasivam)
- Move integrated MAC Endpoint out of the list of internal ports
and configure it separately (Manivannan Sadhasivam)
Virtualization:
- Add ACS quirk for Pericom PI7C9X2G608 switches (Tim Harvey)
- Fix a long-standing bug in the Intel PCH Root Port MPC ACS quirk
that didn't update the intended INTEL_MPC_REG_IRBNCE bit because it
used a 16-bit config write when a 32-bit write was intended
(Mohamad Raizudeen)
Procfs:
- Avoid spurious runtime PM wakeup on config space accesses that are
outside config space and fail before reaching PCI (Krzysztof
Wilczyński)
- Warn on user-space writes to kernel-exclusive config space regions,
as we already do for sysfs (Krzysztof Wilczyński)
- Check credentials of opener, not reader, for config space reads, as
we already do for sysfs (Krzysztof Wilczyński)
Sysfs:
- In pci_write_legacy_io(), avoid out-of-bounds reads from the user
buffer and fix incorrect ioport write data (1-byte writes on
little-endian powerpc, 2- and 4-byte writes on big-endian powerpc)
(Krzysztof Wilczyński)
- In pci_read_legacy_io(), fix incorrect ioport read data for 2- and
4-byte reads on big-endian powerpc (Krzysztof Wilczyński)
- Fix I/O port accessor argument order in Alpha pci_legacy_write()
(Krzysztof Wilczyński)
- Avoid spurious runtime PM wakeup on config space accesses that are
outside config space and fail before reaching PCI (Krzysztof
Wilczyński)
- Return -EINVAL, not -ENODEV, for mmap of I/O BAR that fails because
the arch doesn't support it, as we do for procfs (Krzysztof
Wilczyński)
- Check for LOCKDOWN_PCI_ACCESS for legacy_io and legacy_mem, as we
do for other config space accessors (Krzysztof Wilczyński)
Peer-to-peer DMA:
- Add Nvidia Vera Rubin to list of platforms that support P2PDMA
(Leon Romanovsky)
Endpoint framework:
- Check doorbell SUCCESS bit in pci_endpoint_test to avoid treating
some failures as successes (Niklas Cassel)
- Fail doorbell test when the trigger IRQ is missed (Niklas Cassel)
New native PCIe controller drivers:
- Add DT binding and driver for NVIDIA Tegra264 (Thierry Reding)
Native PCIe controllers:
- Use common wait time definitions for PCIe link monitoring instead
of defining driver-private duplicates (Thierry Reding)
Generic host bridge driver:
- Fix NULL pointer dereference that caused enumeration failures on
32-bit CAM systems (Steffen Persvold)
Amlogic Meson PCIe controller driver:
- Correct the PERST# GPIO state so it remains asserted until power
and REFCLK become stable to fix enumeration failure (Ronald
Claveau)
ASPEED PCIe controller driver:
- Switch to irq_domain_create_linear() so we can obsolete
irq_domain_add_linear() (Jiri Slaby)
Cadence PCIe controller driver:
- Add MODULE_DEVICE_TABLE to generate module aliases for OF-based
module autoloading (Pengpeng Hou)
- Add debugfs 'ltssm_status' file for LGA- and HPA-based Cadence
controllers (Hans Zhang)
- Support up to x4 (not x2) lanes for J200 (Takuma Fujiwara)
- Fix host/endpoint dependencies for cadence-plat driver to fix link
error when cadence-plat is built-in but the host or endpoint driver
is modular (Aksh Garg)
Freescale i.MX6 PCIe controller driver:
- Add imx6 intr/aer/pme interrupt lines for i.MX95 (Richard Zhu)
- Remove PERST# checking from pci_host_common_parse_port() so callers
can decide whether to fall back to legacy DT binding with PERST# in
the host bridge (Sherry Sun)
- Fix build issues when PCI_PWRCTRL_GENERIC or PCI_HOST_COMMON is a
module (Arnd Bergmann)
- Create pwrctrl devices only once by doing it from imx_pcie_probe()
instead of imx_pcie_host_init(), which is used during both probe
and resume (Sherry Sun)
- Use 'dw_pcie_rp->skip_pwrctrl_off' to avoid powering off devices
during suspend to preserve wakeup capability (Sherry Sun)
- Add runtime PM support for i.MX95 to allow dynamic power management
when the link is idle (Richard Zhu)
Intel VMD host bridge driver:
- Support device ID 0x28C1 and assume that BIOS has already
enumerated the hierarchy below VMD and stored bus range info for OS
to use (Nirmal Patel)
- Add support for VMCONFIG BUS_RESTRICT_CFG=3, which makes it
possible to enumerate downstream devices on Intel Arrow Lake-HX
systems and probably others (Ali Alaei)
- Pay attention to _OSC negotiation for VMD hierarchy only when
running on bare metal, not when running in a VM (Nirmal Patel)
- Add Nova Lake (NVL) and Dunlow (DNL) Device IDs (Szymon Durawa)
MediaTek PCIe controller driver:
- Add support for PCIe controller in EcoNet EN7528 and EN751221 SoCs
(Caleb James DeLisle)
MediaTek PCIe Gen3 controller driver:
- Add mediatek-gen3 'memory-region' for restricted DMA buffer
(Chen-Yu Tsai)
NVIDIA Tegra264 PCIe controller driver:
- Distinguish Tegra264 C0 PCIe controller for internal GPU from C1-C5
controllers so the unit address matches the first 'reg' entry
(Thierry Reding)
- Add Tegra264 Root Port stanzas to prepare for generic WAKE#
handling (Thierry Reding)
Qualcomm PCIe controller driver:
- Add IPQ9650 compatible with global interrupt (Kathiravan
Thirumoorthy)
- Add IPQ5210 compatible with IPQ9574 fallback (Varadarajan
Narayanan)
- Add DT binding and driver support for Hawi SoC (Matthew Leung)
- Skip PERST# GPIOs provided by downstream PCIe devices, which should
be handled by drivers of those devices (Manivannan Sadhasivam)
- Stop advertising Attention Button Present (no Qcom SoCs support
Attention Buttons) so pciehp can use Presence Detect Changed events
(Qiang Yu)
Renesas R-Car PCIe controller driver:
- Add rcar-gen4-pci-host optional 'msi-parent' for GIT ITS (Marek
Vasut)
- When MSI is enabled but iMSI-RX is not used, configure AXIINTC to
allow GIT ITS to handle MSI (Marek Vasut)
- Refactor GIC600 implementation to make it easier to add platforms
that only support 32-bit addressing (Marek Vasut)
- Add Renesas R-Car Gen4 S4/V4H/V4M to the list of GIC600
integrations that only support 32-bit addressing (Marek Vasut)
Renesas RZ/G3S PCIe controller driver:
- Add DT binding and driver support for RZ/V2H(P) SoC, which contains
two PCIe controllers, configured either as a single x4 link or two
independent x2 link controllers (Lad Prabhakar)
SpacemiT K1 PCIe controller driver:
- Add missing MODULE_DEVICE_TABLE() to generate module alias info for
OF-based module autoloading (Pengpeng Hou)
StarFive PCIe controller driver:
- Fix resource leaks on error paths in host_init() (Ali Tariq)
- Fix runtime PM handling and teardown ordering to avoid register
access while power or clocks are disabled (Ali Tariq)
- Check for runtime PM resume failure to avoid register access while
power or clocks are disabled (Ali Tariq)
Synopsys DesignWare PCIe controller driver:
- Add LECARC PMU IDs to the DWC RAS/DES VSEC list so it can take
advantage of the existing debugfs support for silicon debug, error
injection, and event counters (Brett Zhou)
- Factor pcie_valid_speed() and pci_bus_speed2lnkctl2() out of bwctrl
so they can be shared by the DWC core (Hans Zhang)
- Flush MSI writes from endpoint before unmapping the iATU, as we
already do for MSI-X writes (Niklas Cassel)
- Unmap MSI iATU window before mapping MSI-X window, to avoid a
subsequent MSI write using a disabled aperture and losing the
interrupt (Niklas Cassel)
- Change endpoint .pre_init() and .init() callbacks to return errors
and handle them (Marek Vasut)
UltraRISC PCIe controller driver:
- Add 'core', 'dbi', and 'aux' clocks to DT binding and manage them
in the driver (Jia Wang)
- Use module_platform_driver() since this may be built as a module,
though not removable because IRQs can't be safely disposed (Jia
Wang)
MicroSemi Switchtec management driver:
- Add Microchip PCI1008 device ID and include it in NTB DMA alias
quirk (Logan Gunthorpe)
Miscellaneous:
- Document how to write PCI Host Controller drivers (Manivannan
Sadhasivam)
- Fix typos in documentation (D'Orus Tsitera)
- Use %pe format specifier to print error pointers so we get symbolic
errname when available (Krzysztof Wilczyński)"
* tag 'pci-v7.3-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci: (124 commits)
PCI: vmd: Add Nova Lake (NVL) and Dunlow (DNL) Device IDs
PCI: tegra264: Add Tegra264 support
dt-bindings: PCI: tegra264: Switch to PCIe Root Port bindings
dt-bindings: PCI: tegra264: Strictly distinguish C0 from C1-C5
PCI/AER: Support Advisory Non-Fatal Errors
PCI: Fix 32-bit config write in Intel PCH Root Port MPC ACS quirk
PCI: dwc: Handle return value from endpoint .pre_init callback
PCI: dwc: Handle return value from endpoint .init callback
PCI: dwc: Add PCI ID for LECARC PCIe PMU
PCI/ASPM: Mask ASPM states based on Devicetree properties
PCI/ASPM: Disable/restore ASPM on every function for multi-function devices
Documentation: PCI: Document how to write PCI Host Controller drivers
PCI/ASPM: Use pcie_capability_clear_and_set_word() for ASPM disable/restore
PCI: Add support for PCIe WAKE# interrupt
PCI: Allow D3 for native hotplug-capable Root Ports on non-x86 platforms
dt-bindings: PCI: Correct white-space style
PCI/ASPM: Avoid L0s for Realtek RTS525A
PCI: ultrarisc: Use module_platform_driver()
PCI: ultrarisc: Get and enable DP1000 PCIe controller clocks
dt-bindings: PCI: ultrarisc: Add required DP1000 PCIe clocks
...
One new driver: leapraid (similar to mpi3mr but OK'd by Broadcom). The
usual suspects for driver updates (ufs, qla2xxx, smartpqi, zfcp, fnic,
ibmvfc) plus a few small core updates: a fix for an uninitialized sg
list pad bytes plus the removal of the dma mask check for max
sectors. The big update in the sd driver is mostly code refactoring for
obscure error leg handling.
Signed-off-by: James E.J. Bottomley <James.Bottomley@HansenPartnership.com>
-----BEGIN PGP SIGNATURE-----
iLgEABMIAGAWIQTnYEDbdso9F2cI+arnQslM7pishQUCaogFixsUgAAAAAAEAA5t
YW51MiwyLjUrMS4xMiwyLDImHGphbWVzLmJvdHRvbWxleUBoYW5zZW5wYXJ0bmVy
c2hpcC5jb20ACgkQ50LJTO6YrIW3+AEAk1xhTuoYYPb87dWVpo74D0KwOjw144uQ
jxBbQRx3mV8A/1kzGC5/eGU5XcruUaU6DXcYE7KSb+5aqFdjcHhj1e8a
=7IX1
-----END PGP SIGNATURE-----
Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI updates from James Bottomley:
"One new driver: leapraid (similar to mpi3mr but OK'd by Broadcom). The
usual suspects for driver updates (ufs, qla2xxx, smartpqi, zfcp, fnic,
ibmvfc) plus a few small core updates: a fix for an uninitialized sg
list pad bytes plus the removal of the dma mask check for max sectors.
The big update in the sd driver is mostly code refactoring for obscure
error leg handling"
* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (195 commits)
scsi: fnic: Fix built-in NVMe/FC build
scsi: fnic: Fix invalid comparison for error
scsi: core: Fill in DMA padding bytes in scsi_alloc_sgtables()
scsi: zfcp: Enable CONTEXT_ANALYSIS
scsi: zfcp: Add __must_hold() attribute to zfcp_qdio_sbal_get()
scsi: fnic: Use GFP_ATOMIC for VLAN alloc under spinlock
scsi: storvsc: Support manual scans for all Hyper-V targets
scsi: sd: Fix sd_done() sense handling condition
scsi: sd: Fix special_vec mempool leak when scsi_alloc_sgtables() fails
scsi: sd: Fix error handling in sd_probe() after large pool creation failure
scsi: leapraid: Add driver documentation
scsi: leapraid: Add new SCSI driver
scsi: ufs: Add support for the aggregated read query opcode
scsi: ufs: Use unsigned types for the BSG query
scsi: ibmvfc: Fix spelling mistake "Deleteing" -> "Deleting"
scsi: qla2xxx: Update version to 12.00.00.2607b2
scsi: qla2xxx: Bound i2c->length in I2C bsg handlers
scsi: qla2xxx: Zero SFP DMA buffer in FRU/I2C bsg handlers
scsi: qla2xxx: Validate BSG request_len before reading vendor_cmd[]
scsi: qla2xxx: Zero-init bsg stack buffers to avoid info leak
...
- Some code cleanups to rename the function used to identify ZAC
devices and declare some local functions static (me).
- Refactoring and improvement of the translation of the SCSI
REPORT SUPPORTED OPCODES command to allow users access to the entire
list of supported commands (me).
- Fix the translation of the WRITE SAME command with UNMAP bit set (DSM
TRIM) for devices with a sector size larger than 2K and devices that
support multiple TRIM segments (Niklas).
- Add support detecting support for and translating the SCSI commands
related to the storage elements depopulation feature (GET PHYSICAL
ELEMENT STATUS, REMOVE ELEMENT AND TRUCATE, REMOVE ELEMENT AND MODIFY
ZONES and RESTORE ELEMENTS AND REBUILD) (me).
- Improvements to the sata_mv driver probe code (clocks and IRQ
initialization) (Rosen).
- Improve resource initialization in the pata_rb532_cf, pata_pxa,
sata_highbank and ahci_da850 drivers (Rosen).
- Improve PIO data-in command completions to better hndle slow devices,
e.g. CF cards (Richard).
- Improve the DMA channel management using device resources in the
pata_pxa driver (Rosen).
- Fix the pata_ep93xx driver to correctly fallback to PIO mode if DMA
initialization fails (Rosen).
- Use named initializers to define the match tables of the ahci_xgene,
ahci_qoriq and ahci_platform drivers (Pawel).
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQSRPv8tYSvhwAzJdzjdoc3SxdoYdgUCaoKIigAKCRDdoc3SxdoY
dryUAPkBLx9RghguodHt3hfUoxn48RxtPMw8h102AYJXFYG34gEAgcUHsK7uECUr
vRlG1NQbypq1bDbckGeSJ1qDdfriPwU=
=A1ZQ
-----END PGP SIGNATURE-----
Merge tag 'ata-7.3' of git://git.kernel.org/pub/scm/linux/kernel/git/libata/linux
Pull ata updates from Damien Le Moal:
- Some code cleanups to rename the function used to identify ZAC
devices and declare some local functions static (me)
- Refactoring and improvement of the translation of the SCSI REPORT
SUPPORTED OPCODES command to allow users access to the entire list of
supported commands (me)
- Fix the translation of the WRITE SAME command with UNMAP bit set (DSM
TRIM) for devices with a sector size larger than 2K and devices that
support multiple TRIM segments (Niklas)
- Add support detecting support for and translating the SCSI commands
related to the storage elements depopulation feature (GET PHYSICAL
ELEMENT STATUS, REMOVE ELEMENT AND TRUCATE, REMOVE ELEMENT AND MODIFY
ZONES and RESTORE ELEMENTS AND REBUILD) (me)
- Improvements to the sata_mv driver probe code (clocks and IRQ
initialization) (Rosen)
- Improve resource initialization in the pata_rb532_cf, pata_pxa,
sata_highbank and ahci_da850 drivers (Rosen)
- Improve PIO data-in command completions to better hndle slow devices,
e.g. CF cards (Richard)
- Improve the DMA channel management using device resources in the
pata_pxa driver (Rosen)
- Fix the pata_ep93xx driver to correctly fallback to PIO mode if DMA
initialization fails (Rosen)
- Use named initializers to define the match tables of the ahci_xgene,
ahci_qoriq and ahci_platform drivers (Pawel)
* tag 'ata-7.3' of git://git.kernel.org/pub/scm/linux/kernel/git/libata/linux: (28 commits)
ata: use named initializers for acpi_device_id
ata: pata_ep93xx: fix PIO fallback when DMA init fails
ata: pata_pxa: use devres for DMA channel management
ata: libata-sff: don't busy-wait for PIO data-in command completion
ata: ahci_da850: use devm_platform_ioremap_resource()
ata: sata_highbank: use devm_platform_ioremap_resource
ata: pata_pxa: use devm_platform_ioremap_resource
ata: pata_rb532_cf: use devm_platform_ioremap_resource()
ata: sata_mv: use devm clock helpers
ata: sata_mv: Use platform_get_irq() to get interrupt
ata: pata_mpc52xx: Remove redundant dev_err()
ata: libata-eh: make ata_eh_qc_complete() and ata_eh_qc_retry() static
ata: libata-scsi: add support for the REMOVE ELEMENT AND MODIFY ZONES command
ata: libata-scsi: add support for the RESTORE ELEMENTS AND REBUILD command
ata: libata-scsi: add support for the REMOVE ELEMENT AND TRUNCATE command
ata: libata-scsi: add support for the GET PHYSICAL ELEMENT STATUS command
ata: libata-core: detect support for depopulation capabilities
ata: libata-scsi: improve ata_get_xlat_func
ata: libata: improve the definition of device flags
scsi: define depopulation capabilities related service actions
...
Two minor core fixes: one for power management issues in error handling
and the other to fix a deadlock in door locking of SCSI devices with
removable media; and a minor bug fix for the debug driver.
Signed-off-by: James E.J. Bottomley <James.Bottomley@HansenPartnership.com>
-----BEGIN PGP SIGNATURE-----
iLgEABMIAGAWIQTnYEDbdso9F2cI+arnQslM7pishQUCanxl4BsUgAAAAAAEAA5t
YW51MiwyLjUrMS4xMiwyLDImHGphbWVzLmJvdHRvbWxleUBoYW5zZW5wYXJ0bmVy
c2hpcC5jb20ACgkQ50LJTO6YrIUKWgD/Yk1iSHcOBw9Ac6CzVAbBPiBQWKCLiQAo
16Ey+pk599sBAM9Bpt6rYM4Zj3O/u1K9cJ2g+q/iomQK+IC5YdC8xaOv
=7yaq
-----END PGP SIGNATURE-----
Merge tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"Two minor core fixes: one for power management issues in error
handling and the other to fix a deadlock in door locking of SCSI
devices with removable media; and a minor bug fix for the debug
driver"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: scsi_debug: Negate wrapped memcmp() result
scsi: core: Do not block on tag allocation in scsi_eh_lock_door()
scsi: core: pair EH runtime PM get and put
The fnic NVMe/FC code is guarded with IS_ENABLED(CONFIG_NVME_FC). That
also evaluates true when NVME_FC is built as a module.
When fnic is built into vmlinux and NVME_FC=m, fnic_nvme.o still
references the NVMe/FC transport helpers even though those helpers are
not reachable from built-in code. The final vmlinux link then fails with
undefined nvme_fc_* symbols.
Use IS_REACHABLE(CONFIG_NVME_FC) for the fnic NVMe/FC implementation and
prototypes so built-in fnic uses the disabled stubs unless the NVMe/FC
transport is reachable.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202608092246.XZe7Hlrt-lkp@intel.com/
Reviewed-by: Sesidhar Baddela <sebaddel@cisco.com>
Reviewed-by: Arulprabhu Ponnusamy <arulponn@cisco.com>
Reviewed-by: Gian Carlo Boffa <gcboffa@cisco.com>
Reviewed-by: Arun Easi <aeasi@cisco.com>
Signed-off-by: Karan Tilak Kumar <kartilak@cisco.com>
Link: https://patch.msgid.link/20260810110627.4521-1-kartilak@cisco.com
Signed-off-by: Martin K. Petersen (Oracle) <mkp@kernel.org>
The current comparison err != ERR_ECMDUNKNOWN is useless because err < 0
and ERR_ECMDUNKNOWN == 5. The logic is that if the CMD_CAPABILITY
command was executed, there is no need to respond to unknown errors.
Therefore, the sign of the number in the comparison must be changed.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Signed-off-by: Roman Demidov <roman.demidov.nn@gmail.com>
Reviewed-by: Karan Tilak Kumar <kartilak@cisco.com>
Link: https://patch.msgid.link/20260807091852.13151-1-roman.demidov.nn@gmail.com
Signed-off-by: Martin K. Petersen (Oracle) <mkp@kernel.org>
During fuzz testing, the following issue was discovered:
BUG: KMSAN: uninit-value in __dma_map_sg_attrs+0x217/0x310
__dma_map_sg_attrs+0x217/0x310
dma_map_sg_attrs+0x4a/0x70
ata_qc_issue+0x9f8/0x1420
__ata_scsi_queuecmd+0x1657/0x1740
ata_scsi_queuecmd+0x79a/0x920
scsi_queue_rq+0x4472/0x4f40
blk_mq_dispatch_rq_list+0x1cca/0x3ee0
__blk_mq_sched_dispatch_requests+0x458/0x630
blk_mq_sched_dispatch_requests+0x15b/0x340
__blk_mq_run_hw_queue+0xe5/0x250
__blk_mq_delay_run_hw_queue+0x138/0x780
blk_mq_run_hw_queue+0x4bb/0x7e0
blk_mq_sched_insert_request+0x2a7/0x4c0
blk_execute_rq+0x497/0x8a0
sg_io+0xbe0/0xe20
scsi_ioctl+0x2b36/0x3c60
sr_block_ioctl+0x319/0x440
blkdev_ioctl+0x80f/0xd70
__se_sys_ioctl+0x219/0x420
__x64_sys_ioctl+0x93/0xe0
x64_sys_call+0x1d6c/0x3ad0
do_syscall_64+0x4c/0xa0
entry_SYSCALL_64_after_hwframe+0x6e/0xd8
Uninit was created at:
__alloc_pages+0x5c0/0xc80
alloc_pages+0xe0e/0x1050
blk_rq_map_user_iov+0x2b77/0x6100
blk_rq_map_user_io+0x2fa/0x4d0
sg_io+0xad6/0xe20
scsi_ioctl+0x2b36/0x3c60
sr_block_ioctl+0x319/0x440
blkdev_ioctl+0x80f/0xd70
__se_sys_ioctl+0x219/0x420
__x64_sys_ioctl+0x93/0xe0
x64_sys_call+0x1d6c/0x3ad0
do_syscall_64+0x4c/0xa0
entry_SYSCALL_64_after_hwframe+0x6e/0xd8
Bytes 14-15 of 16 are uninitialized
Memory access of size 16 starts at ffff88800cbdb000
When processing the last unaligned element of the scatterlist, it is
supplemented with missing bytes in the amount of pad_len. These bytes
remain uninitialized, which leads to a problem.
Extend last_sg->length by pad_len first, then use sg_zero_buffer() to
zero those pad_len bytes. sg_zero_buffer() uses sg_miter internally,
which correctly handles sg entries spanning multiple pages and padding
that crosses a page boundary.
Found by Linux Verification Center (linuxtesting.org) with Syzkaller.
Fixes: 40b01b9bbd ("block: update bio according to DMA alignment padding")
Cc: stable@vger.kernel.org
Signed-off-by: Petr Vaganov <p.vaganov@ideco.ru>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Link: https://patch.msgid.link/20260628185229.37957-1-p.vaganov@ideco.ru
Signed-off-by: Martin K. Petersen (Oracle) <mkp@kernel.org>
fnic_fcoe_process_vlan_resp() allocates a VLAN descriptor with
kzalloc_obj() (default GFP_KERNEL) while holding vlans_lock via
spin_lock_irqsave(). GFP_KERNEL may sleep, which is not allowed in this
atomic context and can trigger a sleeping-from-invalid-context warning
or deadlock.
Pass GFP_ATOMIC so the allocation is safe under the IRQ-safe spinlock.
Fixes: 098585aa8a ("scsi: fnic: Add and integrate support for FIP")
Cc: stable@vger.kernel.org
Signed-off-by: Linkai Gong <gonglinkai@kylinos.cn>
Reviewed-by: Karan Tilak Kumar <kartilak@cisco.com>
Link: https://patch.msgid.link/20260731073820.16449-1-gonglinkai@kylinos.cn
Signed-off-by: Martin K. Petersen (Oracle) <mkp@kernel.org>
The Fibre Channel transport topology created by storvsc exposes only one
dummy remote port per SCSI host. Its scsi_target_id is always zero.
As a result, the FC transport user-scan path looks up the remote port
using target ID 0. It cannot initiate a scan for Target 1 or higher. No
SCSI command is therefore sent to Hyper-V when userspace explicitly
requests a scan of one of these targets.
storvsc itself supports up to STORVSC_FC_MAX_TARGETS and already passes
scmnd->device->id to Hyper-V as vm_srb->target_id. Devices on Target 1
and higher work when initially discovered. They can also be rediscovered
by a full host scan, such as the scan triggered after an FC port bounce.
Provide a storvsc-specific user_scan callback that uses the exported
scsi_scan_target() interface. Iterate over the requested channel and
target ranges so that wildcard and explicitly addressed scans retain the
expected SCSI sysfs scan semantics.
This bypasses the single-rport lookup in fc_user_scan() and allows
userspace to explicitly scan any target supported by storvsc without
requiring one synthetic fc_rport for every Hyper-V target.
Signed-off-by: Laurence Oberman <loberman@redhat.com>
Link: https://patch.msgid.link/20260723163743.1274830-1-loberman@redhat.com
Signed-off-by: Martin K. Petersen (Oracle) <mkp@kernel.org>
Only enter the sense_key switch when the command returned CHECK
CONDITION with valid, non-deferred sense. The old condition let deferred
or invalid sense fall through and mis-handle the I/O.
Fixes: 03aba2f795 ("[SCSI] sd/scsi_lib simplify sd_rw_intr and scsi_io_completion")
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Signed-off-by: Yang Xiuwei <yangxiuwei@kylinos.cn>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Link: https://patch.msgid.link/20260707030333.22245-4-yangxiuwei@kylinos.cn
Signed-off-by: Martin K. Petersen (Oracle) <mkp@kernel.org>
sd_set_special_bvec() allocates a special payload page for UNMAP and
WRITE SAME commands. If scsi_alloc_sgtables() fails afterward in
sd_setup_unmap_cmnd() or sd_setup_write_same{10,16}_cmnd(), the SCSI
midlayer does not call uninit_command() because RQF_DONTPREP is not set
yet, leaking the page.
Call sd_uninit_command() on error, and clear RQF_SPECIAL_PAYLOAD after
freeing the page.
Fixes: 81d926e8b5 ("sd: split sd_setup_discard_cmnd")
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Signed-off-by: Yang Xiuwei <yangxiuwei@kylinos.cn>
Reviewed-by: John Garry <john.g.garry@oracle.com>
Link: https://patch.msgid.link/20260707030333.22245-3-yangxiuwei@kylinos.cn
Signed-off-by: Martin K. Petersen (Oracle) <mkp@kernel.org>
After device_add(&sdkp->disk_dev) succeeds, sd_large_pool_create()
failure must unregister disk_dev and let scsi_disk_release() free
sdkp. Going through out_free_index kfree()s an already registered device
and leaks the sysfs entry.
Fixes: 7179e626b7 ("scsi: sd: Enable sector size > PAGE_SIZE in SCSI sd driver")
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Signed-off-by: Yang Xiuwei <yangxiuwei@kylinos.cn>
Reviewed-by: John Garry <john.g.garry@oracle.com>
Link: https://patch.msgid.link/20260707030333.22245-2-yangxiuwei@kylinos.cn
Signed-off-by: Martin K. Petersen (Oracle) <mkp@kernel.org>
comp_write_worker() returns true when the compared data matches.
memcmp() returns zero for equal data and non-zero for different data, so
its result must be negated before it is stored in a bool.
The first segment already uses !memcmp(), but the wrapped segment uses
memcmp() directly, reversing the match result. Use !memcmp() there as
well.
Fixes: 38d5c8336e ("scsi_debug: add Report supported opcodes+tmfs; Compare and write")
Cc: stable@vger.kernel.org
Signed-off-by: Xu Rao <raoxu@uniontech.com>
Reviewed-by: John Garry <john.g.garry@oracle.com>
Link: https://patch.msgid.link/E5AD42E9C0E18633+20260803095328.3445311-1-raoxu@uniontech.com
Signed-off-by: Martin K. Petersen (Oracle) <mkp@kernel.org>
Dongdong Hao <doubled@leap-io-kernel.com> says:
This series adds the LeapRAID driver and its documentation.
This version addresses issues reported by Sashiko and the kernel test
robot, as well as issues identified through internal testing. Because
[PATCH v4 1/2] exceeded the line-count limit of the public Sashiko
service, it was not analyzed. We therefore deployed Sashiko locally
with an increased line-count limit to complete the analysis and have
fixed all identified issues.
Link: https://patch.msgid.link/cover.1785823793.git.doubled@leap-io-kernel.com
Signed-off-by: Martin K. Petersen (Oracle) <mkp@kernel.org>
The LeapRAID driver provides support for LeapRAID PCIe RAID controllers,
enabling communication between the host operating system, firmware, and
hardware for efficient storage management.
The driver is organized into several logical modules, each with a clear
responsibility:
leapraid_os.c: Integrates with the Linux SCSI subsystem, handling host
template callbacks, PCIe device probing, and initialization.
leapraid_func.c: Contains low-level routines for firmware/hardware
interaction, interrupt handling, and reset logic.
leapraid_app.c: Provides the ioctl interface for user-space tools.
leapraid_transport.c: Manages interactions with the SCSI transport
layer for SAS PHYs and ports.
leapraid_func.h: Contains internal definitions shared among driver
modules.
leapraid.h: Contains low-level hardware definitions for
driver/firmware interaction.
The leapraid_probe() function orchestrates the setup: it allocates the
adapter structure and SCSI host, configures hardware interfaces, and
registers it with the SCSI mid-layer. Following registration,
scsi_scan_host() is invoked to initiate device discovery, with firmware
reporting devices via interrupt-driven events.
This initial commit provides the necessary infrastructure for
subsequent development of full I/O path handling, error recovery,
and advanced management features.
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Hannes Reinecke <hare@kernel.org>
Signed-off-by: Dongdong Hao <doubled@leap-io-kernel.com>
Link: https://patch.msgid.link/0cbc6245aabdc6e8c90587675e76ba316c5b549e.1785823793.git.doubled@leap-io-kernel.com
Signed-off-by: Martin K. Petersen (Oracle) <mkp@kernel.org>
scsi_eh_lock_door() is called from scsi_restart_operations() while the
host is still in the SHOST_RECOVERY state, i.e. before the host is
switched back to SHOST_RUNNING and scsi_run_host_queues() restarts the
queues. It allocates a request via scsi_alloc_request() with no flags,
so blk_mq_get_tag() may block waiting for a free sched tag when all tags
are already in use.
Those tags can be held by commands that were just requeued by
scsi_eh_flush_done_q() during error handling. Such commands cannot be
dispatched until the host leaves SHOST_RECOVERY and
scsi_run_host_queues() is called - which only happens *after*
scsi_eh_lock_door() returns.
This forms a circular dependency:
- scsi_eh_lock_door(), running in the SCSI error handler thread, waits
for a sched tag held by a requeued command;
- the requeued command cannot complete and release its sched tag until
the error handler thread leaves scsi_restart_operations() and restart
the queues.
For devices with a single driver tag (e.g. USB storage) it is a
guaranteed deadlock and I/O that can never be submitted. This problem
has also been reproduced in our environment.
Locking the door is a best-effort operation, and scsi_eh_lock_door()
already returns silently when the request allocation fails. Pass
BLK_MQ_REQ_NOWAIT to scsi_alloc_request() so the allocation fails
instead of blocking when no tag is available. This breaks the circular
dependency and allows the error handler to finish restarting the queues,
after which the pending commands are dispatched normally.
Signed-off-by: Zizhi Wo <wozizhi@huawei.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Link: https://patch.msgid.link/20260723041238.1584632-1-wozizhi@huaweicloud.com
Signed-off-by: Martin K. Petersen (Oracle) <mkp@kernel.org>
shost->eh_noresume is currently consulted twice in one error handling
iteration: once before scsi_autopm_get_host() and once again before
scsi_autopm_put_host().
That is racy when a PM-triggered error path flips shost->eh_noresume
while the SCSI EH thread is still running.
The problem flow looks like this:
PM path
ufshcd_set_dev_pwr_mode()
shost->eh_noresume = 1
ufshcd_execute_start_stop <-- trigger EH
...
shost->eh_noresume = 0
EH path
scsi_error_handler()
if (!shost->eh_noresume)
scsi_autopm_get_host() <-- skipped
...
if (!shost->eh_noresume)
scsi_autopm_put_host() <-- executed later
In that case one EH iteration can skip autoresume on entry and still
drop a runtime PM reference on exit. That leaves an unmatched runtime PM
put and can trigger a runtime PM usage count underflow.
Fix this by making eh_noresume a regular bool so it can be accessed with
READ_ONCE() and WRITE_ONCE(). Snapshot it once per EH iteration and use
that snapshot for both runtime PM get and put decisions.
Fixes: ae0751ffc7 ("[SCSI] add flag to skip the runtime PM calls on the host")
Signed-off-by: Hongjie Fang <hongjiefang@asrmicro.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Peter Wang <peter.wang@mediatek.com>
Link: https://patch.msgid.link/20260729111614.2407559-1-hongjiefang@asrmicro.com
Signed-off-by: Martin K. Petersen (Oracle) <mkp@kernel.org>
Nilesh Javali <njavali@marvell.com> says:
This series collects bug fixes, hardening, and small cleanups for the
qla2xxx driver that are independent of the QLA29xx adapter enablement.
Most were uncovered by static analysis and fuzzing of the driver's
interrupt, mailbox, NVMe, and BSG paths; 30 of the 33 patches carry a
Fixes: tag and are marked for stable.
The series is organised as follows:
Queue pairs, MSI-X, and interrupt setup/teardown
Clamp MSI-X derived queue counts to avoid truncation, fix a
use-after-free of qpair work on queue teardown, and quiesce the
response IRQ before freeing the request queue.
Firmware dump, FCE trace, and flash/version paths
Improve firmware dump data capture, serialize the flash version read in
the reset handler, clarify the MPI optrom address/length units, fix FCE
trace enable parsing in debugfs, and fix a use-after-free of the FCE
trace during a firmware dump.
Probe and mailbox paths
Fix the cs84xx use-after-free on host teardown, don't query firmware
state while the chip is down, zero the mailbox struct in
qla2x00_get_firmware_state(), and null out freed pointers in the
qla2x00_mem_alloc() error path.
Response/status IOCB path
Use memset_io() to clear the QLAFX00 request ring slot, fix response
queue over-consumption in __qla_consume_iocb(), fix a soft lockup in
the polling continuation IOCB signature, bound rsp_info_len to avoid an
out-of-bounds sense-data read, avoid a req_q_map double-read in
qla2x00_error_entry(), and reject non-SCSI SRBs on the status IOCB fast
path.
NPIV and report-ID acquisition
Clamp max_npiv_vports to the VP_CTRL bitmap capacity, avoid a double
completion on async IOCB timeout, and correct vport
handling in report ID acquisition (skip a vport under deletion, drop
the vport reference under lock, and hold vport_slock for the host map
update).
NVMe LS and abort handling
Fix an abort reference leak on repeated abort, skip the NVMe LS reject
IOCB when firmware is not started, unlink the unsolicited context
before freeing on the LS reject error path, and serialize the
unsolicited context list with a per-fcport lock.
BSG passthrough hardening
Use a coherent DMA buffer for D_Port diagnostics, zero-init bsg stack
buffers and the SFP DMA buffer to avoid information leaks, validate the
BSG request_len before reading vendor_cmd[], and bound i2c->length in
the I2C bsg handlers.
The final patch bumps the driver version to 12.00.00.2607b2.
The series applies on top of the qla2xxx QLA29xx series (v6, 56 patches)
on Linux 7.2-rc1.
Link: https://patch.msgid.link/20260730155838.2119230-1-njavali@marvell.com
Signed-off-by: Martin K. Petersen (Oracle) <mkp@kernel.org>
Nilesh Javali <njavali@marvell.com> says:
Add support for the QLA29xx generation of Marvell QLogic Fibre Channel
HBAs (ISP2091/ISP2291/ISP2099/ISP2299). The 29xx family shares much of
its architecture with the existing 27xx/28xx adapters but introduces
128-byte request and response ring entries (up from 64 bytes), requiring
extended IOCB definitions and updated ring management throughout the
driver.
The key hardware change is the wider IOCB format: every request and
response queue entry is now 128 bytes. This propagates into every code
path that builds, submits, or processes IOCBs -- command submission,
status completion, marker, CT pass-through, ELS, logio, task management,
abort, ABTS, VP control, and NVMe.
The series is organised as follows:
Patches 01-08: Foundation and flash/firmware infrastructure
PCI device ID registration, ISP-flags wiring, flash read/write
interface, NVRAM configuration, queue initialisation, FC operational
firmware load, removal of a redundant VPD flash read in the sysfs read
path, and BSG passthrough (flash block I/O, MPI firmware load/dump).
Patches 09-11: 128-byte IOCB infrastructure
New qla_fw29.h header with extended structure definitions, status
continuation and marker IOCBs, and IO-path updates that select the
correct IOCB size via the entry-size helpers.
Patches 12-24: Sysfs, mailbox commands, and core enablement
Sysfs attribute gating for unsupported 29xx features, mailbox command
enablement (get_fw_version, execute_fw, get_adapter_id, init_firmware,
get_firmware_state, serdes, ELS, echo_test, data rate), shutdown path,
ring-slot helpers, and memory allocation updates.
Patches 25-39: Response-path IOCB handling and final wiring
Status continuation, status entry, CT pass-through, PUREX, ELS, logio,
task management, abort, ABTS, VP control/config/report-ID, LS4
pass-through, and BSG feature gating adjustments.
Patches 40-55: bug fixes uncovered during review of the earlier postings
-- queue teardown NULL dma_free and bitmap locking, endianness/bitfield
cleanups, 64-bit FPM word counters, 64G/128G port speed setting and
reporting, an edif NULL deref, Name Server logout detection on FWI2
adapters, VP index bounds, NVMe abort and LS-reject locking, a dport
diagnostics info leak, a BSG job leak, and an unbounded FRU image count.
Patch 56: bump the driver version to 12.00.00.2607b1.
The series applies on top of Linux 7.2-rc1.
Thanks,
Nilesh
[mkp: Resolve merge conflict]
Link: https://patch.msgid.link/20260723050413.3897522-1-njavali@marvell.com
Signed-off-by: Martin K. Petersen (Oracle) <mkp@kernel.org>
struct qla_i2c_access carries a 16-bit length field alongside a fixed
64-byte buffer:
struct qla_i2c_access {
uint16_t device, offset, option, length;
uint8_t buffer[0x40];
} __packed;
qla2x00_write_i2c() and qla2x00_read_i2c() use the user-supplied
i2c->length without any bounds check. i2c is overlaid on a 256-byte
on-stack buffer and sfp is a 256-byte DMA-pool buffer, so a length up to
65535 overruns both:
- write: memcpy(sfp, i2c->buffer, i2c->length) over-reads the stack and
over-writes the sfp heap buffer, and qla2x00_write_sfp() then DMAs
i2c->length bytes out of the 256-byte buffer.
- read: qla2x00_read_sfp() DMAs i2c->length bytes into the 256-byte sfp,
then memcpy(i2c->buffer, sfp, i2c->length) overflows the 64-byte
buffer inside the on-stack array.
A caller holding CAP_SYS_RAWIO can use this to corrupt the heap and the
kernel stack. Reject requests whose length exceeds the buffer before any
copy or DMA transfer in both handlers.
Fixes: 9ebb5d9c69 ("[SCSI] qla2xxx: Add I2C BSG interface.")
Cc: stable@vger.kernel.org
Reported-by: Sashiko <sashiko-dev@google.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Link: https://patch.msgid.link/20260730155838.2119230-33-njavali@marvell.com
Signed-off-by: Martin K. Petersen (Oracle) <mkp@kernel.org>
The FRU and I2C bsg handlers stage their transfer in a DMA_POOL_SIZE
(256-byte) bounce buffer obtained from dma_pool_alloc(), which does not
zero the allocation. They initialize only a few leading bytes before
handing the buffer to qla2x00_write_sfp().
qla2x00_write_sfp() can override the transfer length with a user-supplied
value:
if (len == 1)
opt |= BIT_0;
if (opt & BIT_0)
len = *sfp;
*sfp is the first byte of the (user-controlled) payload, so len can grow
up to 255. The device then DMA-reads len bytes from the 256-byte pool
buffer. Since only a small prefix was written
(e.g. MAX_FRU_SIZE == 36 bytes for a FRU version, one byte for a FRU
status register), the hardware reads past the initialized region and
writes up to ~219 bytes of stale DMA-pool heap memory to the device
flash.
Allocate the buffer with dma_pool_zalloc() in all five FRU/I2C handlers
so any bytes beyond the initialized data are zero rather than stale heap
contents.
Fixes: 697a4bc691 ("[SCSI] qla2xxx: Provide method for updating I2C attached VPD.")
Fixes: 9ebb5d9c69 ("[SCSI] qla2xxx: Add I2C BSG interface.")
Cc: stable@vger.kernel.org
Reported-by: Sashiko <sashiko-dev@google.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Link: https://patch.msgid.link/20260730155838.2119230-32-njavali@marvell.com
Signed-off-by: Martin K. Petersen (Oracle) <mkp@kernel.org>
The FC BSG transport allocates job->request via memdup_user() using the
exact user-supplied request_len. For FC_BSG_HST_VENDOR,
fc_bsg_host_dispatch() only guarantees request_len covers msgcode and
vendor_id; it does not account for the vendor_cmd[] flexible array.
qla2xxx then reads the command selector vendor_cmd[0] and, in several
sub-handlers, vendor_cmd[1]/[2] or structures overlaid on the vendor
command area without verifying request_len. A caller holding
CAP_SYS_RAWIO can submit a short request whose vendor_id matches the
host, triggering out-of-bounds heap reads (KASAN-detectable, and able to
mis-select a command or panic).
Add a central guard in qla2x00_process_vendor_specific() so the selector
is always in bounds, restrict the early vendor_cmd[0] read in
qla24xx_bsg_request() to sufficiently long vendor messages, and add
request_len checks to the sub-handlers that read further:
qla24xx_proc_fcp_prio_cfg_cmd(), qla2x00_process_loopback(),
qla84xx_reset(), qla84xx_updatefw(), qla2x00_read_optrom(),
qla2x00_update_optrom(), qlafx00_mgmt_cmd() and
qla28xx_validate_flash_image().
Fixes: 01e0e15c8b ("scsi: don't use fc_bsg_job::request and fc_bsg_job::reply directly")
Cc: stable@vger.kernel.org
Reported-by: Sashiko <sashiko-dev@google.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Link: https://patch.msgid.link/20260730155838.2119230-31-njavali@marvell.com
Signed-off-by: Martin K. Petersen (Oracle) <mkp@kernel.org>
Several bsg handlers stage their request/reply in an uninitialized 256-byte
on-stack buffer (uint8_t bsg[DMA_POOL_SIZE]) and fill it via
sg_copy_to_buffer(), which only copies as many bytes as the user-supplied
request payload. When the request is shorter than the structure, the
remainder of the buffer is left holding stale stack data.
qla2x00_read_fru_status() and qla2x00_read_i2c() then copy the full
structure back to the reply payload with sg_copy_from_buffer(), leaking the
uninitialized stack bytes to user space. The write/update paths do not copy
the buffer back, but can feed uninitialized fields to the device.
Zero the stack buffer at declaration in all five handlers, mirroring the
heap kzalloc() approach, so short requests can no longer expose stale
memory.
Fixes: 697a4bc691 ("[SCSI] qla2xxx: Provide method for updating I2C attached VPD.")
Fixes: 9ebb5d9c69 ("[SCSI] qla2xxx: Add I2C BSG interface.")
Cc: stable@vger.kernel.org
Reported-by: Sashiko <sashiko-dev@google.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Link: https://patch.msgid.link/20260730155838.2119230-30-njavali@marvell.com
Signed-off-by: Martin K. Petersen (Oracle) <mkp@kernel.org>
qla26xx_dport_diagnostics() streaming-maps the caller's result buffer with
dma_map_single(). The bsg path passes &dd->buf from the __packed struct
qla_dport_diag, where buf lands at a 2-byte offset and shares cachelines
with the surrounding options/unused fields. Mapping such a misaligned
sub-buffer violates the DMA API requirement that streaming buffers be
cacheline aligned and not share a cacheline with other data, and can
corrupt data on non-DMA-coherent architectures.
Allocate a dedicated DMA-coherent buffer inside qla26xx_dport_diagnostics()
for the mailbox command and copy the result back into the caller's buffer.
This removes the streaming map of the misaligned sub-buffer entirely; the
caller's buffer is now only a plain CPU buffer, so its packing no longer
matters.
Fixes: ec89146215 ("qla2xxx: Add bsg interface to support D_Port Diagnostics.")
Cc: stable@vger.kernel.org
Reported-by: Sashiko <sashiko-dev@google.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Link: https://patch.msgid.link/20260730155838.2119230-29-njavali@marvell.com
Signed-off-by: Martin K. Petersen (Oracle) <mkp@kernel.org>
The fcport->unsol_ctx_head list is modified from several contexts without
a common lock. Entries are added in qla2xxx_process_purls_iocb() from the
response queue ISR (under the qpair qp_lock), while they are removed from
qla2xxx_process_purls_pkt() (DPC/purex worker), qla_nvme_xmt_ls_rsp()
(NVMe-FC transport callback) and qla_nvme_release_lsrsp_cmd_kref() (SRB
completion). The qpair qp_lock cannot serialize this per-fcport list since
multiqueue adapters add entries through different qpairs, so a concurrent
add and delete (or two concurrent deletes) can corrupt the list pointers.
Introduce a dedicated per-fcport spinlock, unsol_ctx_lock, initialized in
qla2x00_alloc_fcport(), and take it around every list_add_tail()/list_del()
on unsol_ctx_head. The add nests under the existing qp_lock; no delete path
takes qp_lock, so the lock order is consistent and deadlock free.
Fixes: 875386b988 ("scsi: qla2xxx: Add Unsolicited LS Request and Response Support for NVMe")
Cc: stable@vger.kernel.org
Reported-by: Sashiko <sashiko-dev@google.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Link: https://patch.msgid.link/20260730155838.2119230-28-njavali@marvell.com
Signed-off-by: Martin K. Petersen (Oracle) <mkp@kernel.org>
qla_nvme_xmt_ls_rsp() obtains uctx, which was linked into
fcport->unsol_ctx_head by qla2xxx_process_purls_iocb() and is still linked
when the NVMe transport calls back to transmit the LS response. On the
error (out:) path the function frees uctx with kfree() but never removes
it from the list. This leaves a freed node in fcport->unsol_ctx_head: the
next list_add_tail() for that fcport writes through the freed node, and a
subsequent list_del() can corrupt the list or panic.
Unlink uctx with list_del() before kfree() on the error path, matching the
other free sites in qla_nvme_release_lsrsp_cmd_kref() and
qla2xxx_process_purls_pkt(). qla2x00_rel_sp() in the failure path only
returns the SRB to its pool and does not invoke sp->put_fn, so the out:
path is the sole free and uctx is always still linked there.
Fixes: 875386b988 ("scsi: qla2xxx: Add Unsolicited LS Request and Response Support for NVMe")
Cc: stable@vger.kernel.org
Reported-by: Sashiko <sashiko-dev@google.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Link: https://patch.msgid.link/20260730155838.2119230-27-njavali@marvell.com
Signed-off-by: Martin K. Petersen (Oracle) <mkp@kernel.org>
qla_nvme_xmt_ls_rsp() bails out to the out: label when firmware is not
started (!ha->flags.fw_started), but the out: path unconditionally calls
qla_nvme_ls_reject_iocb(), which ends in qla2x00_start_iocbs() and an
unconditional doorbell write to the request queue in-pointer register.
This rings the firmware doorbell and queues an IOCB that stopped or
resetting firmware cannot consume, and touches MMIO during the reset/EEH
window where fw_started is also clear.
Only emit the LS reject IOCB (and ring the doorbell) when fw_started is
set; otherwise just clean up and return. The post-allocation failure
cases (SRB alloc / qla2x00_start_sp() failure) run with firmware started
and still send the reject. Apply the same guard to the reject emission
in qla2xxx_process_purls_pkt().
Fixes: 875386b988 ("scsi: qla2xxx: Add Unsolicited LS Request and Response Support for NVMe")
Cc: stable@vger.kernel.org
Reported-by: Sashiko <sashiko-dev@google.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Link: https://patch.msgid.link/20260730155838.2119230-26-njavali@marvell.com
Signed-off-by: Martin K. Petersen (Oracle) <mkp@kernel.org>
qla_nvme_ls_abort() and qla_nvme_fcp_abort() take a command reference with
kref_get_unless_zero() and then call schedule_work() on priv->abort_work,
ignoring its return value. qla_nvme_abort_work() runs once and drops
exactly one reference via kref_put(&sp->cmd_kref, sp->put_fn).
Since the per-abort INIT_WORK() was moved to submission time,
schedule_work() now returns false when the work is already pending, for
example on a concurrent transport teardown and timeout-driven abort of
the same command. In that case the reference taken for the second abort
is never released because the work still executes only once, leaking a
reference. The command is then never returned to the NVMe-FC transport,
which can hang the port.
Drop the reference when schedule_work() returns false, so each
kref_get_unless_zero() is balanced regardless of whether the work was
newly queued. The held reference keeps priv->sp valid for the put.
Fixes: 7e85f6dbc8 ("scsi: qla2xxx: Initialize NVMe abort_work once at submission")
Cc: stable@vger.kernel.org
Reported-by: Sashiko <sashiko-dev@google.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Link: https://patch.msgid.link/20260730155838.2119230-25-njavali@marvell.com
Signed-off-by: Martin K. Petersen (Oracle) <mkp@kernel.org>
qla24xx_report_id_acquisition() format-1 handling drops vport_slock after
taking the vport reference and then calls qla_update_host_map() without
the lock. That reaches qla_update_vp_map(), which mutates the ha->host_map
btree via btree_insert32()/btree_update32()/btree_remove32() and is
documented to require vport_slock to be held by the caller. Running it
unlocked can race concurrent host_map updates and corrupt the btree.
The format-2 path in the same function already wraps its host_map update
(SET_AL_PA) in vport_slock; the format-1 path is the lone outlier.
Hold vport_slock across the format-1 qla_update_host_map() call to honor
the documented locking contract. The vref_count taken in the loop keeps
the vport valid, so this only adds the missing host_map serialization.
Fixes: 430eef03a7 ("scsi: qla2xxx: Relocate/rename vp map")
Cc: stable@vger.kernel.org
Reported-by: Sashiko <sashiko-dev@google.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Link: https://patch.msgid.link/20260730155838.2119230-24-njavali@marvell.com
Signed-off-by: Martin K. Petersen (Oracle) <mkp@kernel.org>
qla24xx_report_id_acquisition() format-1 handling takes the vport
reference under vport_slock but drops it outside the lock, after setting
vp->vp_flags and vp->dpc_flags:
set_bit(VP_IDX_ACQUIRED, &vp->vp_flags);
set_bit(REGISTER_FC4_NEEDED, &vp->dpc_flags);
set_bit(REGISTER_FDMI_NEEDED, &vp->dpc_flags);
atomic_dec(&vp->vref_count);
Neither set_bit() nor atomic_dec() imply a memory barrier, so on a weakly
ordered architecture the decrement can become visible before the flag
stores. qla24xx_deallocate_vp_id() polls vref_count under vport_slock and
unlinks the vport once it reads zero, after which qla24xx_vport_delete()
frees it via scsi_host_put(). The poller could therefore observe
vref_count == 0 early and tear the vport down while the pending vp_flags/
dpc_flags stores land on freed memory.
Drop the reference under vport_slock, as is done for the matching
increment and by every other vref_count user. The unlock release pairs
with the deallocate poller's lock acquire so the flag stores are ordered
before vref_count == 0 can be observed.
Fixes: 793cedee29 ("scsi: qla2xxx: Hold vport reference in qla24xx_report_id_acquisition()")
Cc: stable@vger.kernel.org
Reported-by: Sashiko <sashiko-dev@google.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Link: https://patch.msgid.link/20260730155838.2119230-23-njavali@marvell.com
Signed-off-by: Martin K. Petersen (Oracle) <mkp@kernel.org>
qla24xx_report_id_acquisition() format-1 handling walks ha->vp_list under
vport_slock, takes a vref_count on the matching vport and calls
qla_update_host_map() to register its port id.
A vport teardown via qla24xx_vport_delete() sets VPORT_DELETE, then
qla24xx_disable_vp() removes the vport from the host_map btree and zeroes
vha->d_id (RESET_AL_PA). The vport is only unlinked from vp_list later,
in qla24xx_deallocate_vp_id(), which clears vp_map[idx] (RESET_VP_IDX)
but does not touch host_map. In the window in between, report ID
acquisition can still find the vport on vp_list and call
qla_update_host_map(); with d_id already zeroed it takes the
btree_insert32() path and re-inserts the dying vport into host_map.
Nothing cleans that entry afterwards, so once scsi_host_put() frees the
vha a later host_map lookup dereferences freed memory.
Skip a vport that has VPORT_DELETE set before taking the reference, so it
is neither re-registered nor scheduled for DPC re-registration. This
mirrors the existing guard in qla2x00_alert_all_vps().
Fixes: 41dc529a46 ("qla2xxx: Improve RSCN handling in driver")
Cc: stable@vger.kernel.org
Reported-by: Sashiko <sashiko-dev@google.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Link: https://patch.msgid.link/20260730155838.2119230-22-njavali@marvell.com
Signed-off-by: Martin K. Petersen (Oracle) <mkp@kernel.org>
qla2x00_async_iocb_timeout() tries to abort a timed-out async IOCB. When
qla24xx_async_abort_cmd() fails, both the SRB_LOGIN_CMD path and the
SRB_CTRL_VP/default path scan outstanding_cmds[] for the SRB and then
call sp->done(sp, QLA_FUNCTION_TIMEOUT) unconditionally, without checking
whether the SRB was actually found and removed.
If the response ISR completes the same handle first, it removes the SRB
under qp_lock_ptr and runs sp->done() -> complete(sp->comp). The
submitter qla24xx_control_vp() wakes from wait_for_completion(), clears
sp->comp, drops its reference and returns, reclaiming the on-stack
completion. The timer reference keeps the SRB alive across the timeout
handler, but not the submitter's stack. The timeout then issues a second
sp->done() -> qla_ctrlvp_sp_done(), which evaluates "if (sp->comp)
complete(sp->comp)"; with the pointer loaded before the submitter's NULL
store, complete() writes into the freed stack frame, a use-after-free.
Track whether this path removed the SRB from outstanding_cmds and only
call sp->done() when it did, so the command is completed exactly once by
whichever path owns it. This mirrors the sp_found guard already used in
qla24xx_abort_iocb_timeout().
Fixes: f6145e86d2 ("scsi: qla2xxx: Fix race between switch cmd completion and timeout")
Cc: stable@vger.kernel.org
Reported-by: Sashiko <sashiko-dev@google.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Link: https://patch.msgid.link/20260730155838.2119230-21-njavali@marvell.com
Signed-off-by: Martin K. Petersen (Oracle) <mkp@kernel.org>
ha->max_npiv_vports is taken from firmware (mcp->mb[11]) and only
constrained so that (max_npiv_vports + 1) is a multiple of
MIN_MULTI_ID_FABRIC, which permits values of 63, 127, 191 and 255.
NPIV vports are then allocated up to that count.
VP enable uses the VP_CONFIG IOCB, which addresses a vport through a
plain vp_index byte, so a vp_index beyond 128 is enabled without issue.
VP disable, however, uses the VP_CTRL IOCB, which selects target vports
through the fixed 128-bit vp_idx_map bitmap. qla24xx_control_vp()
rejects a vp_index past that bitmap and the IOCB builder cannot set a bit
beyond 127, yet qla24xx_vport_delete() frees the local state regardless.
A vport with vp_index > 128 can therefore be created and enabled but
never disabled, leaving it permanently active in firmware: a resource
leak.
Cap ha->max_npiv_vports at init to the vp_idx_map capacity so such
vports are never created. This collapses 191/255 to 127 (still
modulo-valid) and leaves the real-world 63/127 cases unaffected.
Fixes: 4d0ea24769 ("[SCSI] qla2xxx: Retrieve max-NPIV support capabilities from FW.")
Cc: stable@vger.kernel.org
Reported-by: Sashiko <sashiko-dev@google.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Link: https://patch.msgid.link/20260730155838.2119230-20-njavali@marvell.com
Signed-off-by: Martin K. Petersen (Oracle) <mkp@kernel.org>
qla2x00_status_entry() filters out non-TYPE_SRB entries and the
SRB_NVME_CMD, SRB_BIDI_CMD and SRB_TM_CMD types, then falls through to a
SCSI fast path that assumes the command is an SRB_SCSI_CMD. The first
thing on that path, qla_chk_edif_rx_sa_delete_pending(), and the
subsequent handling both evaluate GET_CMD_SP(sp), i.e. sp->u.scmd.cmd.
The srb u union overlays the SCSI command pointer with other command
layouts (bsg_job, iocb_cmd). If firmware delivers an unexpected
STATUS_TYPE IOCB for a non-SCSI handle, sp->u.scmd.cmd can read as a
non-NULL garbage pointer, bypassing the NULL checks in
qla_chk_edif_rx_sa_delete_pending() and at the cp == NULL test, and
leading to a wild pointer dereference.
Reject any SRB whose type is not SRB_SCSI_CMD before entering the fast
path. The outstanding_cmds slot is left untouched so a genuinely
non-SCSI command still completes through its proper handler.
Fixes: dd30706e73 ("scsi: qla2xxx: edif: Add key update")
Cc: stable@vger.kernel.org
Reported-by: Sashiko <sashiko-dev@google.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Link: https://patch.msgid.link/20260730155838.2119230-19-njavali@marvell.com
Signed-off-by: Martin K. Petersen (Oracle) <mkp@kernel.org>
qla2xxx_delete_qpair() deletes the request queue before the response
queue. qla25xx_delete_req_que() frees the request queue memory
(kfree(req) in qla25xx_free_req_que()), but the response-queue MSI-X is
only released later, in qla25xx_free_rsp_que(). In that window the
response interrupt can still fire, qla2xxx_msix_rsp_q() queues
qpair->q_work, and qla_do_work() -> qla24xx_process_response_queue()
dereferences the now-freed rsp->req (LOGINOUT/CT/ELS entries and the
status path), a use-after-free.
The cancel_work_sync() added for the qpair teardown lives in the
response free path, which runs after the request queue is already freed,
so it does not protect rsp->req.
Release the response-queue interrupt and flush qpair->q_work before
deleting the request queue, so no late completion can reach the freed
request queue. Clearing have_irq makes the subsequent
qla25xx_free_rsp_que() skip its free_irq(), and the firmware
queue-delete order (request then response) is preserved; the
request-delete mailbox completes on the default vector and is unaffected
by dropping the qpair response interrupt early.
Fixes: d74595278f ("scsi: qla2xxx: Add multiple queue pair functionality.")
Cc: stable@vger.kernel.org
Reported-by: Sashiko <sashiko-dev@google.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Link: https://patch.msgid.link/20260730155838.2119230-18-njavali@marvell.com
Signed-off-by: Martin K. Petersen (Oracle) <mkp@kernel.org>
qla2x00_error_entry() reads ha->req_q_map[que] twice: once for the NULL
check and again when assigning it to req. The map slot is cleared by
qla25xx_free_req_que() (ha->req_q_map[que_id] = NULL under mq_lock)
during queue teardown, while the response-queue interrupt that drives
qla2x00_error_entry() is still registered (the IRQ is released later in
qla25xx_free_rsp_que()). If the slot is set to NULL between the two
reads, req becomes NULL and is dereferenced.
Read the slot once into req and NULL-check the local before use. mq_lock
is a mutex and cannot be taken from interrupt context, so the single
read plus local check is the appropriate fix for the reported NULL
dereference.
Fixes: a6fe35c052 ("[SCSI] qla2xxx: Avoid invalid request queue dereference for bad response packets.")
Cc: stable@vger.kernel.org
Reported-by: Sashiko <sashiko-dev@google.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Link: https://patch.msgid.link/20260730155838.2119230-17-njavali@marvell.com
Signed-off-by: Martin K. Petersen (Oracle) <mkp@kernel.org>
In qla2x00_status_entry(), the FWI2 status path advances sense_data and
shrinks par_sense_len by rsp_info_len:
if (IS_FWI2_CAPABLE(ha)) {
sense_data += rsp_info_len;
par_sense_len -= rsp_info_len;
}
rsp_info_len is a 32-bit value taken directly from the target's FCP
response (sf.rsp_data_len), while par_sense_len is the IOCB data area
size (28 bytes for 24xx, 60 bytes for 29xx). A hostile or buggy target
reporting an rsp_info_len larger than par_sense_len makes the unsigned
subtraction underflow to a huge value and advances sense_data out of
bounds.
The underflowed par_sense_len then defeats the cap in
qla2x00_handle_sense():
if (sense_len > par_sense_len)
sense_len = par_sense_len;
memcpy(cp->sense_buffer, sense_data, sense_len);
so the memcpy reads up to SCSI_SENSE_BUFFERSIZE bytes from the
out-of-bounds sense_data pointer, leaking adjacent response-ring/heap
memory into the command's sense buffer.
Clamp rsp_info_len to par_sense_len before the subtraction so
par_sense_len can never underflow and sense_data stays within the IOCB
data area. The fix sits before the comp_status switch, covering both
qla2x00_handle_sense() call sites.
Fixes: 5544213be7 ("[SCSI] qla2xxx: Correct extended sense-data handling.")
Cc: stable@vger.kernel.org
Reported-by: Sashiko <sashiko-dev@google.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Link: https://patch.msgid.link/20260730155838.2119230-16-njavali@marvell.com
Signed-off-by: Martin K. Petersen (Oracle) <mkp@kernel.org>
qla27xx_copy_multiple_pkt() and qla27xx_copy_fpin_pkt() poll
rsp_q->ring_ptr->signature for RESPONSE_PROCESSED (0xDEADDEAD) to decide
whether the next continuation IOCB has arrived, spinning on cpu_relax()
without advancing the ring or decrementing the entry count while it has
not. response_t::signature lives at byte offset 60, but a continuation
IOCB (sts_cont_entry_t / struct sts_cont_entry_ext) carries raw FC frame
payload at that offset (data[56..59]). A received frame whose payload
bytes happen to equal 0xDEADDEAD is therefore misread as "not yet
arrived", and the loop spins forever in interrupt/DPC context, causing a
CPU soft lockup.
The poll is also unnecessary: callers of qla27xx_copy_multiple_pkt()
(PT_LS4_UNSOL and the NVMe purls path) already gate on
qla_chk_cont_iocb_avail(), which guarantees all entry_count IOCBs are
present before copying begins. The sibling helper
__qla_copy_purex_to_buffer() already drops the signature poll and relies
on the entry_type == STATUS_CONT_TYPE guard instead.
Remove the signature busy-wait from both helpers, keeping the entry_type
guard, and gate the FPIN path with qla_chk_cont_iocb_avail() so it defers
and re-processes on the next interrupt once all continuation IOCBs have
arrived, mirroring the ELS_AUTH_ELS and PT_LS4_UNSOL arms. With this the
signature field is never read on a continuation IOCB, eliminating the
payload-aliasing lockup.
Fixes: 9f2475fe74 ("scsi: qla2xxx: SAN congestion management implementation")
Cc: stable@vger.kernel.org
Reported-by: Sashiko <sashiko-dev@google.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Link: https://patch.msgid.link/20260730155838.2119230-15-njavali@marvell.com
Signed-off-by: Martin K. Petersen (Oracle) <mkp@kernel.org>
qla24xx_process_response_queue() advances ring_ptr past the head IOCB
before dispatching, so by the time __qla_consume_iocb() runs, ring_ptr
already points at the first continuation IOCB. The function however
looped purex->entry_count times starting at ring_ptr. As entry_count
includes the head, this consumed one entry too many: it stamped
RESPONSE_PROCESSED on the next, unrelated IOCB and advanced the ring
past it, silently dropping a legitimate firmware response. The head
IOCB's signature was also never marked.
Mark the head processed and account for it, then consume only the
entry_count - 1 continuation IOCBs, matching __qla_copy_purex_to_buffer().
Fixes: fac2807946 ("scsi: qla2xxx: edif: Add extraction of auth_els from the wire")
Cc: stable@vger.kernel.org
Reported-by: Sashiko <sashiko-dev@google.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Link: https://patch.msgid.link/20260730155838.2119230-14-njavali@marvell.com
Signed-off-by: Martin K. Petersen (Oracle) <mkp@kernel.org>
When qla2x00_mem_alloc() fails, qla2x00_probe_one() jumps to
probe_hw_failed and calls qla2x00_mem_free(). Several error labels in
qla2x00_mem_alloc() freed adapter members (elsrej.c, purex_dma_pool,
flt, sfp_data, loop_id_map, async_pd, sf_init_cb, ex_init_cb, npiv_info)
but left the pointers dangling. qla2x00_mem_free() then freed them a
second time. Worse, for the dma_pool members it issued
dma_pool_free(ha->s_dma_pool, ...) after s_dma_pool had already been
destroyed and set to NULL at fail_s_dma_pool, dereferencing a NULL pool.
Clear each freed pointer (and its DMA handle) in the error labels so the
subsequent qla2x00_mem_free() skips them.
Cc: stable@vger.kernel.org
Reported-by: Sashiko <sashiko-dev@google.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Link: https://patch.msgid.link/20260730155838.2119230-13-njavali@marvell.com
Signed-off-by: Martin K. Petersen (Oracle) <mkp@kernel.org>
For QLAFX00 the request ring is ioremapped device I/O memory
(ha->iobase + req_que_off), not DMA-coherent RAM, which is why the rest
of the FX00 path accesses it through memcpy_toio() and the wrt_reg_*
helpers. __qla2x00_alloc_iocbs() however zeroed the producer slot with a
plain memset(). On architectures such as ARM64 a regular memset() may
emit unaligned or block-zeroing instructions (e.g. DC ZVA) that are
invalid on Device memory, leading to a synchronous external abort.
Use memset_io() to clear the slot for QLAFX00, matching the I/O
accessors used elsewhere on this ring. Other adapters keep the plain
memset() on their DMA-coherent rings. The zero-fill is retained for FX00
because its IOCB builders (e.g. qlafx00_fxdisc_iocb()) copy only part of
the entry and rely on the unused tail being pre-zeroed.
Fixes: 8ae6d9c7eb ("[SCSI] qla2xxx: Enhancements to support ISPFx00.")
Cc: stable@vger.kernel.org
Reported-by: Sashiko <sashiko-dev@google.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Link: https://patch.msgid.link/20260730155838.2119230-12-njavali@marvell.com
Signed-off-by: Martin K. Petersen (Oracle) <mkp@kernel.org>
qla2x00_free_fce_trace() freed and cleared ha->fce while holding only
fce_mutex. The firmware-dump consumers qla27xx_fwdt_entry_t264() and
qla25xx_copy_fce() read ha->fce (NULL check followed by a copy of the
buffer) under hardware_lock and never take fce_mutex. A debugfs FCE
disable could therefore free the DMA buffer between a dump's NULL check
and its copy, resulting in a use-after-free.
Unpublish ha->fce under hardware_lock, then release the lock and free
the DMA buffer (dma_free_coherent() may sleep). A concurrent dump either
completes its check and copy with the buffer still valid, or observes
ha->fce == NULL and skips it.
Fixes: 841df27d61 ("scsi: qla2xxx: Move FCE Trace buffer allocation to user control")
Cc: stable@vger.kernel.org
Reported-by: Sashiko <sashiko-dev@google.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Link: https://patch.msgid.link/20260730155838.2119230-11-njavali@marvell.com
Signed-off-by: Martin K. Petersen (Oracle) <mkp@kernel.org>
qla2x00_dfs_fce_write() called kstrtoul() with a NULL result pointer,
so a successful parse would dereference NULL and oops. Worse, the int
return value (0 on success, negative errno on failure) was assigned to
the unsigned long enable flag, inverting the intended logic: a valid
number was treated as "disable" while a parse failure enabled FCE.
Parse the value into enable and propagate parse errors to userspace.
Fixes: 841df27d61 ("scsi: qla2xxx: Move FCE Trace buffer allocation to user control")
Cc: stable@vger.kernel.org
Reported-by: Sashiko <sashiko-dev@google.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Link: https://patch.msgid.link/20260730155838.2119230-10-njavali@marvell.com
Signed-off-by: Martin K. Petersen (Oracle) <mkp@kernel.org>
The mbx_cmd_t is allocated on the stack but left uninitialized.
qla2x00_mailbox_command() has several early-return paths (PCI permanent
failure, device failed, EEH busy, ISP abort pending, mailbox access
timeout, purge mbox) that return without writing the input mailbox
registers back into mcp->mb[]. qla2x00_get_firmware_state() then
unconditionally copies mcp->mb[1..6] (and mb[12]) into the caller's
states[] array regardless of the return value.
On such a failure the copied values are uninitialized kernel stack
memory, which is then exposed to userspace via the fw_state and
mpi_fw_state sysfs handlers. Zero the mailbox struct so a failed query
yields deterministic zeroed state instead of leaking stack contents.
Fixes: 4d4df1932b ("[SCSI] qla2xxx: Add ISP84XX support.")
Cc: stable@vger.kernel.org
Reported-by: Sashiko <sashiko-dev@google.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Link: https://patch.msgid.link/20260730155838.2119230-9-njavali@marvell.com
Signed-off-by: Martin K. Petersen (Oracle) <mkp@kernel.org>
qla2x00_fw_state_show() initializes rval to QLA_FUNCTION_FAILED and jumps
to the out: label when the chip is down or EEH is busy. The out: block
then re-issued qla2x00_get_firmware_state() because rval != QLA_SUCCESS,
defeating the chip-down/EEH-busy guards and issuing a mailbox command
(outside optrom_mutex) during ISP reset or PCI error recovery, which can
hang the adapter. It also turned a normal in-lock mailbox failure into a
second unsynchronized mailbox attempt.
Make the out: fallback only mark the firmware state as unknown. The
mailbox is now issued at most once, inside optrom_mutex, and only when
the chip is up and not EEH-busy.
Fixes: b6faaaf796 ("scsi: qla2xxx: Serialize mailbox request")
Cc: stable@vger.kernel.org
Reported-by: Sashiko <sashiko-dev@google.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Link: https://patch.msgid.link/20260730155838.2119230-8-njavali@marvell.com
Signed-off-by: Martin K. Petersen (Oracle) <mkp@kernel.org>
