fll_min (Frame Length Lines) is set to the same value as fll_def
for all modes, which makes it redundant.
The actual value is also erroneous as the sensor works in all
the defined modes with FLL set at the mode height + 20 lines,
so set the vblank control minimum to 20 rather than varying it.
This also improves the maximum frame rate achievable.
Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
The pixel rate is always the same, so there is no need to try and
recompute it in imx355_set_pad_format, and then no need to have the
pointer to it stored.
Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
The link_freq_index value in imx355_mode is unused, so remove it.
Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Compute the binning registers based on the difference between
the mode width/height vs the crop width/height.
Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
The driver already has the LLP value stored in the mode structure,
but also had the same value set via register writes in the mode's
register list. Remove this duplication.
Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Currently the cropping is set via register entries in the per mode
register lists. Add the crop information to the mode structure as
a v4l2_rect, and set the registers programmatically.
Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Registers 0x0340 and 0x0341 (FRM_LENGTH_LINES) are already written
from the set_ctrl(V4L2_CID_VBLANK) handler, so don't write them
from the mode register list.
Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
A large number of registers are identical within all the modes.
Move those to imx355_global_regs.
Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
The sensor supports output over either 2 or 4 CSI2 data
lanes. The binding only permitted the 4 lane configuration.
Add the 2 lane configuration as an option.
Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
The IMX355 sensor supports multiple external clock frequencies,
including 19.2 MHz and 24 MHz. The driver currently supports only
fixed 19.2 MHz input clock.
Refactor the clock handling to make the PLL configuration dependent
on the external clock frequency and add support for 24 MHz. Introduce
a table of clock parameter sets and program the corresponding EXTCLK
frequency and PLL multipliers to maintain consistent internal VCO
frequencies across supported inputs.
The PLL settings are adjusted so that OP VCO remains at 720 MHz
This preserves existing timing characteristics while allowing systems
using a 24 MHz clock to operate correctly.
No functional change for existing 19.2 MHz users.
Assisted-by: Claude:claude-opus-4-6
Signed-off-by: David Heidelberg <david@ixit.cz>
Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
If v4l2_async_register_subdev_sensor failed, then the sensor had
already been powered down by pm_runtime_idle, but the error path
then also explicitly called imx355_power_off as well. That left
an imbalance in the regulator and clock calls.
Call pm_runtime_idle only after v4l2_async_register_subdev_sensor
succeeds to avoid this.
Fixes: efa5fe19c0 ("media: imx355: Enable runtime PM before registering async sub-device")
Cc: stable@vger.kernel.org
Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Renesas R-Car S4/V4H/V4M GIC600 integration has address width for AXI
or APB interface configured to 32 bit, it can therefore access only
the first 4 GiB of physical address space. This information comes from
R-Car V4H Interface Specification sheet; there is currently no technical
update number assigned to this limitation. Further input from hardware
engineer indicates that this limitation also applies to R-Car S4 and V4M.
Name the limitation GEN4GICITS1, and add a driver quirk to mitigate this
limitation.
The quirk is keyed on the combination of the GIC implementation
and the platform identification in the device tree.
Co-developed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Marc Zyngier <maz@kernel.org>
Acked-by: Thomas Gleixner <tglx@kernel.org>
Link: https://patch.msgid.link/20260707203743.88299-5-marek.vasut+renesas@mailbox.org
The GIC600 implementation is now known to be used on multiple 64-bit
SoCs, where it has address width for AXI or APB interface configured
to 32 bit, and it can access only the first 4GiB of physical address
space.
Rework the handling of the quirk to work around this limitation such
that new entries can be added purely as new compatible strings, with
no need to add additional functions or new its_quirk array entries.
Suggested-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Marc Zyngier <maz@kernel.org>
Link: https://patch.msgid.link/20260707203743.88299-4-marek.vasut+renesas@mailbox.org
When MSI is enabled but the DWC built-in iMSI-RX is not used, MSI must
be handled via the GIC ITS. Configure all controller MSI registers
accordingly.
Set or clear the MSICAP0 MSIE bit and the PCIEINTSTS0EN MSI_CTRL_INT
bit based on the MSI enable state. Set both bits when MSI is enabled.
Clear both bits when MSI is disabled.
When MSI is disabled, or when MSI is enabled together with iMSI-RX,
clear AXIINTCADDR and AXIINTCCONT to disable any pass through of MSI
TLPs onto the AXI bus and further into the GIC ITS translation
registers.
When MSI is enabled and iMSI-RX is not used, program AXIINTCADDR with
the target address of the GIC ITS translation register, and program
AXIINTCCONT to enable MSI TLP pass through onto the AXI bus and into
the GIC ITS. This configuration allows the GIC ITS to handle MSI
instead of the integrated iMSI-RX.
The driver includes linux/irqchip/arm-gic-v3.h which pulls in headers
which are available only on ARM and ARM64, on other architectures the
headers are not present and the driver fails to build. This driver is
used only on ARM64 hardware, so isolate its build only to ARM64 to avoid
build failures on other architectures.
Co-developed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
[mani: commit log and squashed the Kconfig fix:
https://patch.msgid.link/20260714131957.38067-1-marek.vasut+renesas@mailbox.org]
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Link: https://patch.msgid.link/20260707203743.88299-3-marek.vasut+renesas@mailbox.org
nonseekable_open() never fails, so the error check is unnecessary.
Remove the dead error handling path.
Signed-off-by: Bui Duc Phuc <phucduc.bui@gmail.com>
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
switch_region_table_read() accesses the region table with READ_ONCE()
and is called from the lockless switch_map() IO path. However,
switch_region_table_write() stores to the same array with a plain
assignment. This results in an inconsistent access pattern for a
lockless shared variable and may trigger data race reports.
Use WRITE_ONCE() to pair with the existing READ_ONCE() in
switch_region_table_read().
Cc: stable@vger.kernel.org
Fixes: 99eb1908e6 ("dm switch: factor out switch_region_table_read")
Signed-off-by: Haotian Zhang <vulab@iscas.ac.cn>
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Add support for the PCIe controller present in the EcoNet EN7528 (and
EN751221) SoCs.
The PCIe controllers present in these SoCs support 2.5 GT/s and 5 GT/s data
rates, but 5 GT/s require re-training after link up.
Co-developed-by: Ahmed Naseef <naseefkm@gmail.com>
Signed-off-by: Ahmed Naseef <naseefkm@gmail.com>
Signed-off-by: Caleb James DeLisle <cjd@cjdns.fr>
[mani: commit log]
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Link: https://patch.msgid.link/20260702150704.265282-1-cjd@cjdns.fr
invalidate_cblocks parses cache block numbers with sscanf() and then
stores them in the narrower dm_cblock_t type. Values larger than the
cblock representation are truncated before invalidation, so a request
for one cache block can invalidate a different block.
Checking the parsed value after sscanf() is not sufficient because
sscanf() does not reliably reject values beyond U64_MAX before storing
into the destination. Such inputs can still be converted to a wrapped
u64 value and then pass a later range check.
Split ranges in place and parse each single value or range endpoint
directly with kstrtouint() instead. This rejects malformed values and
values that do not fit in dm_cblock_t before they can be converted to
cblock values. The existing range validation continues to reject empty
or out-of-cache ranges, including the single-value U32_MAX case whose
exclusive end wraps to zero.
Assisted-by: Codex:gpt-5.5-cyber-preview
Signed-off-by: Samuel Moelius <sam.moelius@trailofbits.com>
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Reviewed-by: Ming-Hung Tsai <mtsai@redhat.com>
Add compatible for MT8189 PCIe Gen3 controller, that is compatible with
the PCIe controller found in MT8192.
Signed-off-by: Louis-Alexis Eyraud <louisalexis.eyraud@collabora.com>
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Link: https://patch.msgid.link/20260701-mt8189-dt-bindings-pcie-v1-1-7c7a65087654@collabora.com
Implement the MES gang contex alloc and free heplers.
Signed-off-by: Prike Liang <Prike.Liang@amd.com>
Reviewed-by: Michael Chen <michael.chen@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Some AMD APU multi-function devices expose an integrated USB xHCI
controller. In some circumstances (such as larger VRAM), the PM core
can resume can fail when the xHCI controller is resuming in parallel
with the GPU/display function.
On affected systems, the xHCI controller can complete pci_pm_resume
and start resuming USB devices while the GPU is still in its much
longer resume path. This race condition leads to USB device resume
failures followed by:
xhci_hcd ...: xHCI host not responding to stop endpoint command
xhci_hcd ...: HC died; cleaning up
Create a device link from any xHCI controller sharing the same PCIe
root port as the APU display function. The link uses DL_FLAG_STATELESS
and DL_FLAG_PM_RUNTIME to ensure the GPU completes its resume before
the xHCI controller begins resuming USB devices.
This device link is done specifically in amdgpu so that if the
platform firmware has been modified such that this issue doesn't happen
the version can be detected and the workaround skipped.
Suggested-by: Aaron Ma <aaron.ma@canonical.com>
Reported-by: mrh@frame.work
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=221073
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Tested-by: Mark Pearson <mpearson-lenovo@squebb.ca>
Tested-by: Alexander F <superveridical@gmail.com>
Tested-by: Francis DB <francisdb@gmail.com>
Link: https://patch.msgid.link/20260713195313.1739762-1-mario.limonciello@amd.com
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
DCN42B enables DML2 and DML21 by default and defines
dcn42b_prepare_mcache_programming(), but the resource function table only
wires the callback when CONFIG_DRM_AMD_DC_DML21 is defined.
There is no in-tree Kconfig symbol named DRM_AMD_DC_DML21, so the
preprocessor always removes the callback entry. Sibling DCN42 and DCN401
resource tables wire their prepare_mcache_programming callbacks
unconditionally, and the core DC code already checks whether the callback
pointer is present before calling it.
Remove the stale guard so DCN42B exposes the callback relation that its
source and DML21 build world already provide.
This is an RFC patch draft from static conditional callback legality
auditing. It needs AMD display maintainer review before submission as a
final fix.
Signed-off-by: Pengpeng Hou <pengpeng@iscas.ac.cn>
Reviewed-by: George Zhang <george.zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
In dm_update_crtc_state(), the skip_modeset path releases new_stream
via dc_stream_release() but does not set the pointer to NULL.
If a later error (e.g., color management failure) triggers the fail
label, the error path calls dc_stream_release() again on the same
dangling pointer, causing a double release and potential use-after-free.
Fix this by setting new_stream to NULL after the initial release.
Fixes: 9b690ef3c7 ("drm/amd/display: Avoid full modeset when not required")
Signed-off-by: WenTao Liang <vulab@iscas.ac.cn>
Reviewed-by: George Zhang <george.zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
link_dp_irq_handler.c includes "link_dp_panel_replay.h" twice. Drop the
redundant second include; this is a non-functional cleanup flagged by
scripts/checkincludes.pl.
Fixes: 1e5cd4adfc ("drm/amd/display: move panel replay out from edp")
Signed-off-by: Anas Khan <anxkhn28@gmail.com>
Reviewed-by: George Zhang <george.zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
dccg35_set_hdmistreamclk_src_new() updates HDMISTREAMCLK_CNTL but
passes DPSTREAMCLK0_SRC_SEL as the field identifier in the second
REG_UPDATE_2 slot.
The current behavior is harmless on DCN3.5 because both fields share the
same bit layout, but it is still incorrect and could break on future
hardware revisions.
Fixes: d36771a034 ("drm/amd/display: Add DCCG DIO, HPO, OPP, and OPTC support for FRL")
Signed-off-by: Dyllan Kobal <dyllan.kobal@zetier.com>
Reviewed-by: George Zhang <george.zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The final check of hubp for NULL covers all remaining lines of code, since
the value of hubp does not change until the end of the method.
This check is redundant because hubp1 is already dereferenced within the
macro.
If it were NULL, the program would have already failed to proceed.
Remove the left part of the expression with the logical "&&".
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Fixes: be1fb44389 ("drm/amd/display: Check null pointers before used").
Signed-off-by: Gleb Markov <markov.gi@npc-ksb.ru>
Reviewed-by: George Zhang <george.zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
kfree() safely handles NULL pointers, so there is no need to check for
NULL before calling kfree().
Remove redundant NULL check.
Found by Coccinelle ifnullfree script.
Signed-off-by: Ziran Zhang <zhangcoder@yeah.net>
Reviewed-by: George Zhang <george.zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The Lenovo Legion 5 15ARH05 (Renoir) ships a BOE 0x08DF eDP panel that
advertises AUX/DPCD backlight control, so amdgpu's automatic detection
(amdgpu_backlight == -1) selects AUX. On this panel the AUX backlight
path has no effect: brightness writes are accepted but the panel level
never changes, the display is stuck at a fixed brightness and
max_brightness is reported as a bogus 511000. As a result neither the
desktop brightness slider nor the brightness hotkeys do anything.
Forcing PWM backlight (amdgpu.backlight=0) restores working control:
max_brightness becomes 65535 and the level tracks writes. This has long
been applied by users as a manual kernel-parameter workaround.
Extend the generic panel backlight quirk with a force_pwm flag, add an
entry for the Legion 5 15ARH05 / BOE 0x08DF panel, and have amdgpu
disable AUX backlight (use PWM) when the quirk matches and the user
lets the driver auto-select the backlight type.
Signed-off-by: Alessandro Rinaldi <ale@alerinaldi.it>
Tested-by: Alessandro Rinaldi <ale@alerinaldi.it>
Reviewed-by: George Zhang <george.zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Use the X86_MATCH_VENDOR_FAM() and X86_MATCH_VENDOR_FAM_MODEL() macros
to make the quirks for dynamic speed switching more scalable.
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Link: https://patch.msgid.link/20260713172431.1599801-1-mario.limonciello@amd.com
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The change referenced by the Fixes tag releases the HIQ SDMA MQD trunk
buffer when device_queue_manager_init() fails after it has been
allocated.
However, the same failure path can also be reached after
init_mqd_managers() has succeeded. At that point dqm->mqd_mgrs[] contains
per-type MQD manager objects owned by the device queue manager. The
normal teardown path frees those objects from uninitialize(), but the
initialization error path only frees dqm itself.
Free the MQD managers from the initialization error path as well. This is
safe for earlier failures because dqm is zeroed when allocated and
init_mqd_managers() clears the entries it rolls back internally.
Fixes: b7cccc8286 ("drm/amdkfd: fix a memory leak in device_queue_manager_init()")
Signed-off-by: Guangshuo Li <lgs201920130244@gmail.com>
Reviewed-by: Mukul Joshi <mukul.joshi@amd.com>
Reviewed-by: Felix Kuehling <felix.kuehling@amd.com>
Signed-off-by: Felix Kuehling <felix.kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Allow using multiple SDMA schedulers only on GPUs where
we are allowed to do concurrent VM flushes.
This consideration is necessary because all GART windows
are mapped in VMID 0 (the kernel VMID) so each buffer
entity would flush VMID 0 concurrently.
Practically this means that we can't use multiple SDMA
engines for TTM on GFX6-8 and Navi 1x.
Fixes: 01c836788b ("drm/amdgpu: pass all the sdma scheds to amdgpu_mman")
Fixes: e4029f7a94 ("drm/amdgpu: only use working sdma schedulers for ttm")
Cc: Pierre-Eric Pelloux-Prayer <pierre-eric.pelloux-prayer@amd.com>
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
amdgpu_dm_audio_eld_notify() is currently only called in atomic commits.
This results in the state of the HDA driver never getting updated when
an audio sink is removed and an atomic commit never comes. (eg the HDMI
audio jack switch in ALSA stays 'on' after the HDMI cable is
disconnected if no other display is connected to cause the compositor to
submit an atomic commit)
Call amdgpu_dm_audio_eld_notify() in
amdgpu_dm_update_connector_after_detect() when a sink is no longer
available to ensure that the HDA driver always gets notified on
disconnect regardless of atomic commits.
Assisted-by: Copilot:claude-sonnet-4.6
Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Reviewed-by: George Zhang <george.zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl>
Reviewed-by: George Zhang <george.zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
While at it, remove redundant error message - request_firmware() will
log a failure anyway.
Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl>
Reviewed-by: George Zhang <george.zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl>
Reviewed-by: George Zhang <george.zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Make the lines greppable by removing an extra EOL and report the
status only once - after the reply is detected.
Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl>
Reviewed-by: George Zhang <george.zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The XGMI reset-on-init path can run while the device is still at the
minimal init level, such as during an NPS memory partition switch. In
that flow the normal RAS IP block hw_init is skipped, so unified RAS
is not enabled when the early CPER initialization is attempted, leaving
CPER disabled for the rest of the device's lifetime.
Resume RAS after the XGMI reset-on-init completes. Once the RAS manager
resume succeeds, the RAS resume wrapper performs deferred CPER
initialization, keeping the path a no-op for devices where CPER was
already initialized.
Keep the deferred CPER retry and its debugfs registration together in
the CPER helper. The normal debugfs ring walk skips the CPER ring until
CPER is enabled, so the ring debugfs entry is created either by the
deferred helper when debugfs is already available or by the normal
debugfs walk.
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Xiang Liu <xiang.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
There were two mistakes in the previous implementation:
The check for AutomaticDCTransition should be inverted.
We recently learned that the kernel should send
PPSMC_MSG_RunningOnAC when the flag is set, and not the
other way around.
The clocks also need to be recomputed, because the code in
the smu7_apply_state_adjust_rules() function selects
different limits on AC and DC.
Fixes: 96da0d8661 ("drm/amd/pm/smu7: Notify SMU7 of DC->AC switch")
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
3 fields in struct amd_ip_funcs have been deleted, so also delete the
kernel-doc comments for them to avoid warnings:
WARNING: ../drivers/gpu/drm/amd/include/amd_shared.h:481 Excess struct member 'check_soft_reset' description in 'amd_ip_funcs'
WARNING: ../drivers/gpu/drm/amd/include/amd_shared.h:481 Excess struct member 'pre_soft_reset' description in 'amd_ip_funcs'
WARNING: ../drivers/gpu/drm/amd/include/amd_shared.h:481 Excess struct member 'post_soft_reset' description in 'amd_ip_funcs'
Fixes: 947e46eb2f ("drm/amdgpu: Delete check_soft_reset() from amd_ip_funcs")
Fixes: b7500532e1 ("drm/amdgpu: Delete pre/post_soft_reset() from amd_ip_funcs")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
We can't print the IP block name when the IP block is NULL.
Note that it should never be NULL, the only way that
can happen is when amdgpu_ip_from_ring() is missing the
given ring type. The check is just there to be sure.
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <error27@gmail.com>
Closes: https://lore.kernel.org/r/202607031711.yLwFhGfp-lkp@intel.com/
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Simple KMS helpers are deprecated because they introduce an unnecessary
intermediate layer between atomic modesetting and the DRM driver.
Inline the functionality of drm_simple_encoder_init() to remove
dependencies on these deprecated helpers.
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Nicolás Antinori <nico.antinori.7@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Commit 055a40c32f ("drm/amd/pm: Use uploaded size for legacy custom
PPTable") changed pp_dpm_set_pp_table() to kmemdup the uploaded buffer
directly and set soft_pp_table_size to the uploaded size. As a result
soft_pp_table now points to an allocation completely outside adev->bios,
making the pp_end > bios_end check in pp_entries_max() likely true for
custom PP tables — returning 0 and breaking PP table overrides via sysfs.
Fixes: c42871ba48 ("drm/amdgpu/pm: add pp_entries_max() helper")
Reported-by: John Olender <john.olender@gmail.com>
Signed-off-by: Asad Kamal <asad.kamal@amd.com>
Reviewed-by: Yang Wang <kevinyang.wang@amd.com>
Tested-by: John Olender <john.olender@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Widen pcie_bandwidth_inst from U32 to U64 to be consistent with
the smu_v13_0_6 definition.
v2: Remove percent conversion (Lijo)
Signed-off-by: Asad Kamal <asad.kamal@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Update two cases in the smu_v13_0_6 GPU metrics accumulated
counter field definition
Widen the following fields from U32 to U64 to prevent counter
wrap-around and match smu_v15_0_8 field sizes:
- prochot_residency_acc
- ppt_residency_acc
- socket_thm_residency_acc
- vr_thm_residency_acc
- hbm_thm_residency_acc
- gfx_activity_acc
- mem_activity_acc
- pcie_nak_sent_count_acc
- pcie_nak_rcvd_count_acc
- pcie_lc_perf_other_end_recovery
Correct the unit annotation from PERCENT to NONE for accumulated
counter fields which are dimensionless hardware counters and carry
no inherent unit:
- gfx_activity_acc
- mem_activity_acc
- pcie_bandwidth_acc
- gfx_busy_acc
v2: remove percent unit (Lijo)
Signed-off-by: Asad Kamal <asad.kamal@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Setup the MES_API_QUERY_MES__GET_CTX_ARRAY_SIZE MES firmware
command request, and get the MES11 process/gang contex size.
Signed-off-by: Prike Liang <Prike.Liang@amd.com>
Reviewed-by: Michael Chen <michael.chen@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
In mes_v11_0_unmap_legacy_queue(), set
remove_queue_after_reset=1 for RESET_QUEUES.
The queue may already be MMIO-reset. This flag
tells MES to drop internal queue state directly
instead of issuing another CP unmap flow, reducing
timeout risk during recovery.
Reviewed-by: Amber Lin <amber.lin@amd.com>
Suggested-by: Shaoyun Liu <shaoyun.liu@amd.com>
Signed-off-by: Jesse Zhang <Jesse.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
AMD Ryzen Pinnacle Ridge (Zen+, family 0x17 model 0x08) CPUs have
PCI controllers that don't support PCIe dynamic speed switching,
causing system freezes during GPU initialization when enabled.
Disable dynamic speed switching when this CPU is detected.
Assisted-by: Claude:sonnet
Fixes: 466a7d1153 ("drm/amd: Use the first non-dGPU PCI device for BW limits")
Closes: https://gitlab.freedesktop.org/drm/amd/-/work_items/5436
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Link: https://patch.msgid.link/20260709031520.841611-1-mario.limonciello@amd.com
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
We need the fence to reemit the gds switch or spm update
after a queue reset.
Fixes: a17ef94121 ("drm/amdgpu: rework ring reset backup and reemit v9")
Cc: timur.kristof@gmail.com
Cc: christian.koenig@amd.com
Reviewed-by: Timur Kristóf <timur.kristof@gmail.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add jpeg_busy and vcn_busy population to smu_v15_0_8 gpu metrics
Signed-off-by: Asad Kamal <asad.kamal@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
