Use luo_test_utils.c for all live update ioctl calls. Remove direct
ioctl calls in liveupdate.c. This avoids code duplication and use common
interface.
While at it, make ioctl error check stricter as liveupdate APIs don't
return postive numbers as a valid result.
Co-developed-by: David Matlack <dmatlack@google.com>
Signed-off-by: David Matlack <dmatlack@google.com>
Reviewed-by: Pasha Tatashin <pasha.tatashin@soleen.com>
Reviewed-by: Pratyush Yadav (Google) <pratyush@kernel.org>
Signed-off-by: Vipin Sharma <vipinsh@google.com>
Link: https://patch.msgid.link/20260720203202.1964557-2-vipinsh@google.com
Signed-off-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
alloc_skb() with the __GFP_NOFAIL flag will never return NULL,
so the subsequent NULL checks and error handling are unreachable
dead code. Remove them.
Signed-off-by: Gou Hao <gouhao@uniontech.com>
Link: https://patch.msgid.link/20260724022851.466017-7-gouhao@uniontech.com
Reviewed-by: Potnuri Bharat Teja <bharat@chelsio.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Enable the two RTL8125 network controllers and corresponding
PHYs connected via the PCIe controllers on the OrangePi R2S.
Signed-off-by: Chukun Pan <amadeus@jmu.edu.cn>
Reviewed-by: Yixun Lan <dlan@kernel.org>
Link: https://patch.msgid.link/20260602100000.2402784-1-amadeus@jmu.edu.cn
Signed-off-by: Yixun Lan <dlan@kernel.org>
Enable i2c1 for k3-com260-ifx and use it for a 24c02 eeprom. This
eeprom, unlike the one connected to i2c2, is part of the carrier board.
Some boards do not have any data programmed on this eeprom from factory.
Signed-off-by: Jennifer Berringer <jberring@redhat.com>
Reviewed-by: Yixun Lan <dlan@kernel.org>
Link: https://patch.msgid.link/20260722202848.1817988-3-jberring@redhat.com
Signed-off-by: Yixun Lan <dlan@kernel.org>
Enable i2c2 on the K3 CoM260 compute module and use it for a 24c02
eeprom. This eeprom stores the product name, a MAC address, and a serial
number.
Signed-off-by: Jennifer Berringer <jberring@redhat.com>
Reviewed-by: Yixun Lan <dlan@kernel.org>
Link: https://patch.msgid.link/20260722202848.1817988-2-jberring@redhat.com
Signed-off-by: Yixun Lan <dlan@kernel.org>
Add a local DTS header that gives symbolic names to the SpacemiT K3
PDMA request lines of the non-secure peripherals. Device trees can use
these K3_PDMA_* macros instead of hard-coded request numbers when wiring
a peripheral "dmas" property.
Signed-off-by: liyeshan <yeshan.li@spacemit.com>
Signed-off-by: Guodong Xu <docular.xu@gmail.com>
Signed-off-by: Zhengyu He <hezhy472013@gmail.com>
Reviewed-by: Yixun Lan <dlan@kernel.org>
Link: https://patch.msgid.link/20260717-k3-com260-spi-v7-2-rc2-b4-preview-20260716-v1-1-969a1b0f783f@gmail.com
Signed-off-by: Yixun Lan <dlan@kernel.org>
Current phy framework can not re-initialize the phy correctly, as it will
assert the phy reset GPIO so the phy id can not be read. Setting the
phy id of board com260 manually so the phy id dectection can be skipped.
Fixes: cfe5c91cb7 ("riscv: dts: spacemit: k3: Initial support for CoM260-IFX board")
Signed-off-by: Inochi Amaoto <inochiama@gmail.com>
Reviewed-by: Yixun Lan <dlan@kernel.org>
Link: https://patch.msgid.link/20260725233351.55004-3-inochiama@gmail.com
Signed-off-by: Yixun Lan <dlan@kernel.org>
Current phy framework can not re-initialize the phy correctly, as it will
assert the phy reset GPIO so the phy id can not be read. Setting the
phy id of board pico-itx manually so the phy id detection can be skipped.
Fixes: 74657a3769 ("riscv: dts: spacemit: Add ethernet device for K3")
Reported-by: E Shattow <e@freeshell.de>
Reported-by: Inochi Amaoto <inochiama@gmail.com>
Closes: https://lore.kernel.org/netdev/20260712045233.800748-1-inochiama@gmail.com
Signed-off-by: Inochi Amaoto <inochiama@gmail.com>
Tested-by: E Shattow <e@freeshell.de>
Reviewed-by: Yixun Lan <dlan@kernel.org>
Link: https://patch.msgid.link/20260725233351.55004-2-inochiama@gmail.com
Signed-off-by: Yixun Lan <dlan@kernel.org>
Although 6fire driver had a few fixes for dealing with the early error
handling during the probe phase, it forgot a pending URB before
freeing the resources, which may lead to a UAF.
This patch addresses it by doing the almost same cleanup procedure
like the normal disconnect phase at the error path.
Reported-and-tested-by: Shuangpeng Bai <shuangpeng.kernel@gmail.com>
Closes: https://lore.kernel.org/20260724030900.1984491-1-shuangpeng.kernel@gmail.com
Cc: <stable@vger.kernel.org>
Link: https://patch.msgid.link/20260726074821.2288158-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
snd_usbmidi_akai_output() computes its fill-loop bound
buf_end = ep->max_transfer - MAX_AKAI_SYSEX_LEN - 1;
as a signed int, so a small device-advertised bulk-OUT max_transfer
makes buf_end negative. The loop guard then compares the u32
urb->transfer_buffer_length against that negative int: the usual
arithmetic conversion turns buf_end into a large unsigned value, so the
guard stays true and each iteration keeps appending SysEx framing and
payload bytes past the end of the URB transfer buffer, which is only
max_transfer bytes long.
A USB device that advertises a tiny bulk-OUT endpoint can therefore
trigger an attacker-length- and content-controlled heap out-of-bounds
write when a process writes to the created /dev/snd/midiC*D* node.
Return early when there is no room for even one SysEx, so the loop is
never entered with a bound that would wrap. The loop is the last
statement of the function, so bailing out is equivalent to it not
running.
Discovered by XBOW, triaged by Baul Lee <baul.lee@xbow.com>
Fixes: 4434ade8c9 ("ALSA: usb-audio: add support for Akai MPD16")
Suggested-by: Takashi Iwai <tiwai@suse.de>
Reported-by: Federico Kirschbaum <federico.kirschbaum@xbow.com>
Reported-by: Baul Lee <baul.lee@xbow.com>
Cc: stable@vger.kernel.org
Signed-off-by: Baul Lee <baul.lee@xbow.com>
Link: https://patch.msgid.link/20260726074500.50145-1-baul.lee@xbow.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Implement an empty disassociate_ucontext() callback so the RDMA core
can move rxe devices between net namespaces. The core requires this
callback to reset user contexts without waiting for userspace.
rxe needs no teardown here: its user-mapped queues live in
reference-counted vmalloc memory (see rxe_mmap.c) that stays valid
while userspace holds the mappings.
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Link: https://patch.msgid.link/20260716132316.1495242-14-jiri@resnulli.us
Reviewed-by: Yanjun Zhu <yanjun.zhu@linux.dev>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Prepare queue mappings for asynchronous ucontext disassociation during
device disable. Rely on the VMA page references to preserve mapped
memory until the final unmap.
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Link: https://patch.msgid.link/20260716132316.1495242-13-jiri@resnulli.us
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Use rdma_dev_access_netns() to scope RDMA device name lookup and "%d" name
allocation to the relevant net namespace. Keep shared mode and
CONFIG_NET_NS=n behaviour system-wide.
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Link: https://patch.msgid.link/20260716132316.1495242-12-jiri@resnulli.us
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Document that SELinux ibendport labels use a global (device name, port)
key, so same-named RDMA devices in different net namespaces share a label.
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Link: https://patch.msgid.link/20260716132316.1495242-11-jiri@resnulli.us
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Document the rdma_cm configfs limitation: configfs is global, so same-named
RDMA devices in different net namespaces cannot both be represented there.
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Link: https://patch.msgid.link/20260716132316.1495242-10-jiri@resnulli.us
Signed-off-by: Leon Romanovsky <leon@kernel.org>
RDMA device names are unique only within a network namespace, but an
RDMA cgroup can account resources for devices from multiple namespaces.
Duplicate names therefore make cgroup output ambiguous and can cause
limit writes to select the wrong device.
Use the system-wide RDMA device index to distinguish duplicate names
while preserving the existing UAPI for unique names. Reject ambiguous
name-only writes with -ENOTUNIQ and expose a complete device view to
administrators.
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Link: https://patch.msgid.link/20260716132316.1495242-9-jiri@resnulli.us
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Tag srp_class by the RDMA device's net namespace so SRP hosts derived from
same-named RDMA devices can coexist across namespaces.
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Link: https://patch.msgid.link/20260716132316.1495242-8-jiri@resnulli.us
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Scope smc_pnet_find_ib() to the caller's net namespace so pnetid setup
cannot bind to a same-named RDMA device from another namespace once names
become per-netns.
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Link: https://patch.msgid.link/20260716132316.1495242-7-jiri@resnulli.us
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Accept RDMA_NLDEV_ATTR_DEV_NAME together with RDMA_NLDEV_NET_NS_FD so a
netlink move can rename the device in the destination namespace. Keep the
name semantics aligned with the existing RDMA rename path.
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Link: https://patch.msgid.link/20260716132316.1495242-6-jiri@resnulli.us
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Thread extack through the existing net namespace move helper and report the
main failure reasons from the core path. Keep the existing move UAPI shape
unchanged.
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Link: https://patch.msgid.link/20260716132316.1495242-5-jiri@resnulli.us
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Allow namespace moves to request a destination device name. Keep requested
names on the same literal-name path as the existing RDMA rename operation,
and keep teardown fallback naming on the trusted kernel-controlled path.
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Link: https://patch.msgid.link/20260716132316.1495242-4-jiri@resnulli.us
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Prepare namespace moves for per-netns names. Check user-initiated moves for
destination-name conflicts before disabling the device, keep same-netns
moves as no-ops, and make teardown moves detach from the exiting namespace
even if fallback naming fails.
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Link: https://patch.msgid.link/20260716132316.1495242-3-jiri@resnulli.us
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Prepare for per-netns RDMA device names by passing the target net
namespace through the name lookup and allocation helpers. Keep current
global uniqueness behaviour.
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Link: https://patch.msgid.link/20260716132316.1495242-2-jiri@resnulli.us
Signed-off-by: Leon Romanovsky <leon@kernel.org>
snd_rme_digiface_read_status() reads a four-word status block from the
device into an uninitialised on-stack __le32 buf[4] and, whenever the
vendor control-IN transfer does not return a negative error, copies all
four words into the caller's status[].
snd_usb_ctl_msg() copies the full requested size back into the caller's
buffer regardless of how many bytes the data stage actually delivered:
buf = kmemdup(data, size, GFP_KERNEL);
err = usb_control_msg(dev, pipe, request, requesttype,
value, index, buf, size, timeout);
memcpy(data, buf, size);
usb_control_msg() returns the transferred length on a short control-IN,
which is a non-negative value, and writes only that many bytes. The
remainder of the copy back is the kmemdup()ed image of the caller's
buffer, so a device answering with a short data stage leaves the
trailing words of buf[] holding leftover kernel stack. The only guard
in the caller is err < 0, so those words are stored into status[].
They then reach user space: snd_rme_digiface_get_status_val() selects a
16-bit halfword of status[] per the control's reg/mask, and the eight
Digiface status controls together expose the whole 16-byte frame to an
unprivileged reader of /dev/snd/controlC*.
Zero-initialise the buffer so a short read yields zeros instead of stack
residue. This mirrors snd_rme_get_status1(), which already clears its
output word before the same kind of vendor read.
Discovered by XBOW, triaged by Baul Lee <baul.lee@xbow.com>
Fixes: 611a96f6ac ("ALSA: usb-audio: Add mixer quirk for RME Digiface USB")
Reported-by: Federico Kirschbaum <federico.kirschbaum@xbow.com>
Reported-by: Baul Lee <baul.lee@xbow.com>
Cc: stable@vger.kernel.org
Signed-off-by: Baul Lee <baul.lee@xbow.com>
Link: https://patch.msgid.link/20260726065020.46070-1-baul.lee@xbow.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
snd_ump_attach_legacy_rawmidi() allocates the legacy conversion array
ump->out_cvts and, on the snd_rawmidi_new() error path, frees it with
kfree() but leaves ump->out_cvts pointing at the freed memory. When the
endpoint is later torn down, snd_ump_endpoint_free() frees ump->out_cvts
a second time, resulting in a double free.
The host snd-usb-audio driver attaches the legacy rawmidi for any USB
MIDI 2.0 (UMP) device, so a device that makes snd_rawmidi_new() fail
reaches this path on enumeration.
Clear ump->out_cvts after freeing it on the error path so it is not
freed again during teardown.
Discovered by XBOW, triaged by Baul Lee <baul.lee@xbow.com>
Fixes: 33cd763078 ("ALSA: ump: Export MIDI1 / UMP conversion helpers")
Reported-by: Federico Kirschbaum <federico.kirschbaum@xbow.com>
Reported-by: Baul Lee <baul.lee@xbow.com>
Cc: stable@vger.kernel.org
Signed-off-by: Baul Lee <baul.lee@xbow.com>
Link: https://patch.msgid.link/20260726051633.41206-1-baul.lee@xbow.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
create_midi2_ump() registers a card-owned snd_ump_endpoint and stores a
back-pointer to its per-interface snd_usb_midi2_ump object in
ump->private_data, but it never installs an ump->private_free hook and
never clears that pointer.
If a later step of snd_usb_midi_v2_create() fails, its error path calls
free_all_midi2_umps(), which kfree()s the snd_usb_midi2_ump object while
the already-registered endpoint keeps pointing at it. The created
/dev/snd/umpC*D* node stays exposed, so the first operation of any UMP
open, ump_to_endpoint(), dereferences the dangling ump->private_data and
reads rmidi->eps[dir] out of freed memory.
A malicious USB MIDI 2.0 device that makes creation fail after the
endpoint is registered can thus trigger a slab use-after-free read on a
subsequent open of the UMP node.
Clear the endpoint's back-pointer before freeing the object, and let
ump_to_endpoint() tolerate a NULL private_data so the open/close/trigger
callbacks fail cleanly (their callers already handle a NULL endpoint)
instead of dereferencing a stale pointer.
Discovered by XBOW, triaged by Baul Lee <baul.lee@xbow.com>
Fixes: ff49d1df79 ("ALSA: usb-audio: USB MIDI 2.0 UMP support")
Reported-by: Federico Kirschbaum <federico.kirschbaum@xbow.com>
Reported-by: Baul Lee <baul.lee@xbow.com>
Cc: stable@vger.kernel.org
Signed-off-by: Baul Lee <baul.lee@xbow.com>
Link: https://patch.msgid.link/20260726051337.41124-1-baul.lee@xbow.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The Acer Nitro 5 AN515-46 (SSID 1025:159e, Realtek ALC287) has a combo
headset jack whose microphone does not work out of the box: the BIOS
leaves pin 0x19 unconfigured, so no headset mic is created.
Apply ALC2XX_FIXUP_HEADSET_MIC, the same fixup already used by the
sibling models AN515-57 (1025:1539) and AN517-55 (1025:1597), which
makes the headset microphone work correctly.
Tested on an Acer Nitro 5 AN515-46 by overriding the model via a patch
firmware with model=alc2xx-fixup-headset-mic.
Signed-off-by: Marcos Paulo Medeiros <maarcospm1996@gmail.com>
Link: https://patch.msgid.link/20260725214131.25872-1-maarcospm1996@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
TongFang X6KK45xU and X6SP45xU have actually different PCI IDs. This patch
Adds the missing PCI ID to fix headphone detection and clarifies the
naming.
Fixes: d595255241 ("ALSA: hda/realtek: Add quirk for TongFang X6xx45xU")
Signed-off-by: Eckhart Mohr <e.mohr@tuxedocomputers.com>
Cc: stable@vger.kernel.org
Signed-off-by: Werner Sembach <wse@tuxedocomputers.com>
Link: https://patch.msgid.link/20260724190109.169889-1-wse@tuxedocomputers.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Setting up the interface when suspended/resuming fails on this card.
Adding a reset and delay quirk will eliminate this problem.
Note: This device's VID conflicts with Apple's (0x05ac).
usb 1-1: New USB device found, idVendor=05ac, idProduct=110b
usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-1: Product: Q2A
usb 1-1: Manufacturer: JKY Technology
usb 1-1: SerialNumber: 330270D2251225
Suggested-by: Rong Zhang <i@rong.moe>
Signed-off-by: Lianqin Hu <hulianqin@vivo.com>
Reviewed-by: Rong Zhang <i@rong.moe>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/TYUPR06MB6217566CFD33F57D3AE46816D2CF2@TYUPR06MB6217.apcprd06.prod.outlook.com
This laptop with an ALC236 codec requires the
ALC236_FIXUP_HP_MUTE_LED_COEFBIT2
fixup for its mute LED to function correctly.
Add the subsystem ID 0x103c:0x86c8 to the quirk table to apply this
fixup.
Signed-off-by: Madhavender Singh <madhav@disroot.org>
Link: https://patch.msgid.link/20260723104736.23386-1-madhav@disroot.org
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The lx6464es driver advertises both 16-bit and packed 24-bit PCM formats,
but lx_trigger_start() and lx_interrupt_request_new_buffer() calculate the
DMA period size as runtime->period_size * runtime->channels * 3. That is
only correct for the packed 24-bit formats.
For 16-bit streams the driver submits buffers that are 50% larger than the
actual ALSA period and advances the DMA address by the same wrong amount.
For example, with 2 channels, 256 frames and 4 periods, the third buffer
already extends beyond the ALSA buffer and the fourth buffer starts outside
it.
Use snd_pcm_lib_period_bytes() so the byte count matches the runtime
format, channel count and period size.
Fixes: 02bec49045 ("ALSA: lx6464es - driver for the digigram lx6464es interface")
Cc: stable@vger.kernel.org
Signed-off-by: Xu Rao <raoxu@uniontech.com>
Link: https://patch.msgid.link/8BB12E8D92A7CDBA+20260723085710.2567463-1-raoxu@uniontech.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Try to remove some, but not all duplicate toolchain definitions. In
these instances, their makefiles already include
tools/scripts/Makefile.include which defines these in a consistent way.
STRIP is the only one that was set with an '=', but I don't think it
was significant so that difference can be dropped.
Signed-off-by: James Clark <james.clark@linaro.org>
Reviewed-by: Ian Rogers <irogers@google.com>
Acked-by: Ihor Solodrai <ihor.solodrai@linux.dev>
Acked-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Documentation/kbuild/llvm.rst mentions that readelf is included in the
LLVM toolchain, but it's not currently included in this block.
Add it so that LLVM=... options also apply to readelf. Users in tools/
were Perf which was hardcoding it, and another was the BPF makefile.
Both already include Makefile.include so convert them to use the new
variables.
Where readelf wasn't doing anything arch specific, use HOSTREADELF
because it's more likely to be installed.
Reviewed-by: Ian Rogers <irogers@google.com>
Signed-off-by: James Clark <james.clark@linaro.org>
Acked-by: Ihor Solodrai <ihor.solodrai@linux.dev>
Acked-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
These blocks are quite big and unreadable without indentation. Indent
them.
No functional changes intended.
Signed-off-by: James Clark <james.clark@linaro.org>
Reviewed-by: Ian Rogers <irogers@google.com>
Acked-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
The version of LLVM tools can be given on the build command with
LLVM=-15, but this isn't applied to all tools. For example $(CC) gets
versioned, but $(CLANG) doesn't. This causes a Perf build with LTO=1 to
fail with an error about mixed clang versions:
ld.lld: error: libperf/core.o: Unknown attribute kind (86)
(Producer: 'LLVM18.1.8' Reader: 'LLVM 15.0.7')
This file has two "ifneq ($(LLVM),)" blocks adjacent to each other, so
merge these blocks making it obvious that all tools should be versioned
consistently and there is nothing special about each block.
This also reveals that ?= and "allow-override" are used inconsistently
between the blocks. "allow-override" is technically only required for
builtin variables, but isn't only used on them, and doesn't do any harm
if used on a non-builtin. Make them all "allow-override" for
consistency. The only functional difference this will cause is if there
is a file level definition of one of the variables followed by an
"#include of Makefile.include" which will now overwrite. But this isn't
done and in a later commit some of the duplicate definitions will be
removed for good measure.
There are also some other LLVM tools that are not defined here and will
be moved in a later commit.
Signed-off-by: James Clark <james.clark@linaro.org>
Reviewed-by: Ian Rogers <irogers@google.com>
Acked-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Fixes: e9c281928c ("kbuild: Make $(LLVM) more flexible")
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Replace printk(KERN_DEBUG) with dev_dbg() using the serio device,
which is the correct logging style for driver code. Also fix missing
space after comma in the function argument, and remove the redundant
'inexio.c:' filename prefix from the message.
Signed-off-by: Bivash Kumar Singh <bivashraj750@gmail.com>
Link: https://patch.msgid.link/20260725130803.6763-1-bivashraj750@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Fix two checkpatch warnings in elo_setup_10():
- Add missing space around '-' operator in array index expression
- Add missing 'const' qualifier to elo_types pointer array, since
the array is never modified after initialization
Signed-off-by: Bivash Kumar Singh <bivashraj750@gmail.com>
Link: https://patch.msgid.link/20260725113638.5147-1-bivashraj750@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
The OMAP SSI driver uses a synthetic HSI controller device allocated via
hsi_alloc_controller(), which does not go through the normal OF/platform
device initialization path.
As a result, the embedded struct device does not have a DMA mask
initialized by default.
After recent DMA API hardening changes, dma_map_sg() and related helpers
now require a valid dma_mask to be present, otherwise the driver may
crash or trigger warnings when attempting DMA mapping operations.
Fix this by explicitly initializing the DMA mask for the SSI controller
device and setting a 32-bit DMA mask, which matches the hardware
capabilities.
Cc: stable@vger.kernel.org
Fixes: f959dcd6dd ("dma-direct: Fix potential NULL pointer dereference")
Reported-by: Merlijn Wajer <merlijn@wizzup.org>
Closes: https://lore.kernel.org/linux-omap/4ed95c71-2066-6b4c-ad1b-53ef02d79d53@wizzup.org/
Signed-off-by: Ivaylo Dimitrov <ivo.g.dimitrov.75@gmail.com>
Link: https://patch.msgid.link/20260724130522.706480-1-ivo.g.dimitrov.75@gmail.com
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Since commit 55b48e23f5 ("genirq/devres: Add error handling in
devm_request_*_irq()"),
devm_request_irq() and devm_request_threaded_irq() automatically log
detailed error messages on failure. Remove the now-redundant
driver-specific dev_err() calls.
Signed-off-by: Pan Chuang <panchuang@vivo.com>
Link: https://patch.msgid.link/20260713132747.394970-3-panchuang@vivo.com
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
ssi_probe() creates the controller debugfs tree before creating the SSI
port child devices. If a port device cannot be created, the error path
removes any children and tears down the controller, but leaves the
debugfs tree behind.
Remove the controller debugfs tree on the port creation failure path,
matching the normal remove path.
Signed-off-by: Pengpeng Hou <pengpeng@iscas.ac.cn>
Link: https://patch.msgid.link/20260616004348.97684-1-pengpeng@iscas.ac.cn
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
-----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEE72YNB0Y/i3JqeVQT2O7X88g7+poFAmplSMcACgkQ2O7X88g7
+pqrlBAAj1Aq4Kv5IP7QtqO2lvzl06PoBUK1ZpoRJM96S+7TxWVc+CKGGLZ9D/kA
5Z/r1u/JeJEOCAsuyzEAdhg/cENWEDvbNNCXzd0COTtccxmfBSm6r72grzXR+Lkn
HkGtGQUVzjCqXt0u+HWj3t71uo6hP2OUaEdLEaYRtQyNc28wu1W9er03FfhrYtOg
8WangpTSsHLDHSpkfpgoRh2f0aiukAdppiPbX5XohNOZGvCzRZKJe885oUqWMjoh
Zqm2YWO2F+heAmsTwQUHbR3VIWJdfYhKPCHSvqLf3y8pxua7IfgRWr44XNPId+CO
V8mlzDfsy0RxpGVrOIttu200PqMVWlVz9bG20dsaSoj2znwHZ830GsEYPDWatp9B
pJFFrkjCkS1KMn3D997JUG5x95JucuEtrjLHO9icnuv1tQl1I7ybAvK4tM2qRzUW
tkTwE3rILuTFUo0BPPP9KfZrDLax0mfZlPJNjlJQ0IURA4IM1xupNzWF2BNNR1nh
yyd4WLYogQwNZ4s9d3fcziC6l1VGJfqWEkEBOGDGScvKhQMzDJoLlLzV9dmjzuk5
CiQbl9z8s3EHDhz+D3LY6yeKEubO39CeXA9RcDGfmlJVz8ae2bERfLoAULrV37Pj
IDi6leDlro26R6MxqymDLmIT/exWA6LeIVslVOx0iqYDkcjYP/Q=
=Vm4h
-----END PGP SIGNATURE-----
Merge tag 'ib-psy-array-helpers-for-v7.3-signed' into psy-next
Immutable branch for battery array helpers to be used by the
USB-C state machine.
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Add power_supply_get_system_batteries() to allow drivers to obtain
a list of registered battery type power supply references in the
system. Also add power_supply_put_system_batteries() to perform
cleanup after the former function is called.
Signed-off-by: Amit Sunil Dhamne <amitsd@google.com>
Reviewed-by: Hans de Goede <johannes.goede@oss.qualcomm.com>
Link: https://patch.msgid.link/20260714-batt-status-v5-1-9de4aa900b69@google.com
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
During schemata file write handling there is one error exit path labeled
"out" that handles all cleanup and unlocking needed on exit. The staged
configs cleared during an error exit may not have been used at the time
of exit making the clearing of the staged configs unnecessary.
Access the exit code using two labels and only clear the staged
configuration if it was in use at the time of exit. Doing so makes the
code flow obvious and simplifies upcoming changes that improve the
handling of failures during early input parsing.
Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Tony Luck <tony.luck@intel.com>
Tested-by: Babu Moger <babu.moger@amd.com>
Link: https://patch.msgid.link/4cdd79d612dc6d62ccd490e1c31298025d66d385.1782857711.git.reinette.chatre@intel.com
dsq->first_task is __rcu for the lockless scx_bpf_dsq_peek(). The task
removal path compares it against the departing task with a plain load, which
sparse flags. The comparison runs under the dsq lock and only tests
identity, so rcu_access_pointer() is the fit.
Signed-off-by: Tejun Heo <tj@kernel.org>
scx_root is __rcu and naked accesses were left as transitional markers for
the multi-scheduler transition, to be converted to accesses through the
associated scheduler instances. Most accesses have since been converted to
resolve the sched from the program or task at hand. The remaining naked
sites divide into ones that semantically always want the root sched, which
this patch resolves, and one that is left to a later patch.
The resolved sites:
- The SCX_OPS_TID_TO_TASK validation and the ecaps sync kick already hold a
sched whose ancestors[] pins the root as entry 0 with plain pointers
stable for the sched's lifetime. Reach the root through the sched at hand.
- The dispatch entry, class switch, idle notification and fork init paths
only execute while the scheduler is live and scx_root never changes inside
the live window, so no update can race them. Add scx_root_protected_live()
which documents that invariant and resolves with a plain load.
- The hotplug path, including the ecaps reseeds, runs with the hotplug lock
held, which excludes the scx_root writers. Add scx_root_protected(), which
accepts either the hotplug lock or scx_enable_mutex.
- Is-root tests use a zero level instead of comparing against the global.
touch_core_sched_dispatch() stays naked, to be resolved by a later patch.
Signed-off-by: Tejun Heo <tj@kernel.org>
cgrp->scx_sched is __rcu and published with rcu_assign_pointer() but every
reader loads it with a plain access, so sparse flags all of them. The reads
are lock-protected: enable/disable paths rewrite the field under all of
scx_enable_mutex, scx_fork_rwsem and cgroup_mutex, and cgroup creation
inherits the parent's sched under cgroup_mutex before the new cgroup is
reachable, so holding any one of the three locks makes the read stable.
Add scx_cgroup_sched() which states the protection with
rcu_dereference_check() and convert the readers. No functional changes.
Signed-off-by: Tejun Heo <tj@kernel.org>
Toolchain and infrastructure:
- 'zerocopy' crates: update to v0.8.54 to fix a modpost error under
'CONFIG_CC_OPTIMIZE_FOR_SIZE=y'.
There are actually two updates in the PR: the one to v0.8.52 is
fairly large and was originally not intended for a fixes PR, but the
actual fix landed in the v0.8.54 one. Thus I included both here.
The v0.8.52 update includes two things upstream added for us:
'--cfg no_fp_fmt_parse' to avoid a local workaround, and the new
'most_traits' feature.
The good news is that, after these updates, the delta with upstream
is now trivial: only an identifier prefix change and the SPDX
parentheses.
- Fix an objtool warning by adding one more 'noreturn' function for
Rust 1.99.0 (expected 2026-10-01).
- Clean up new 'semicolon_in_expressions_from_macros' lint errors for
Rust 1.99.0 (expected 2026-10-01). The lint can be allowed, but it
will be a hard error at some point in the future anyway, so clean it
up now.
- Locally allow new 'suspicious_runtime_symbol_definitions' lint for
Rust 1.98.0 (expected 2026-08-20).
- Globally allow 'clippy::unwrap_or_default' lint since it relies on
optimizations -- under 'CONFIG_CC_OPTIMIZE_FOR_SIZE=y' it does not
work well.
'kernel' crate:
- 'time' module: fix 'Delta::as_micros_ceil()' to round negative values
correctly.
-----BEGIN PGP SIGNATURE-----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=4BpZ
-----END PGP SIGNATURE-----
Merge tag 'rust-fixes-7.2-2' of git://git.kernel.org/pub/scm/linux/kernel/git/ojeda/linux
Pull rust fixes from Miguel Ojeda:
"Toolchain and infrastructure:
- 'zerocopy' crates: update to v0.8.54 to fix a modpost error under
'CONFIG_CC_OPTIMIZE_FOR_SIZE=y'.
There are actually two updates in the PR: the one to v0.8.52 is
fairly large and was originally not intended for a fixes PR, but the
actual fix landed in the v0.8.54 one. Thus I included both here.
The v0.8.52 update includes two things upstream added for us:
'--cfg no_fp_fmt_parse' to avoid a local workaround, and the new
'most_traits' feature.
The good news is that, after these updates, the delta with upstream
is now trivial: only an identifier prefix change and the SPDX
parentheses.
- Fix an objtool warning by adding one more 'noreturn' function for
Rust 1.99.0 (expected 2026-10-01).
- Clean up new 'semicolon_in_expressions_from_macros' lint errors for
Rust 1.99.0 (expected 2026-10-01). The lint can be allowed, but it
will be a hard error at some point in the future anyway, so clean it
up now.
- Locally allow new 'suspicious_runtime_symbol_definitions' lint for
Rust 1.98.0 (expected 2026-08-20).
- Globally allow 'clippy::unwrap_or_default' lint since it relies on
optimizations -- under 'CONFIG_CC_OPTIMIZE_FOR_SIZE=y' it does not
work well.
'kernel' crate:
- 'time' module: fix 'Delta::as_micros_ceil()' to round negative values
correctly"
* tag 'rust-fixes-7.2-2' of git://git.kernel.org/pub/scm/linux/kernel/git/ojeda/linux:
rust: time: fix as_micros_ceil() to round correctly for negative Delta
rust: device: avoid trailing ; in printing macros
objtool/rust: add one more `noreturn` Rust function for Rust 1.99.0
rust: zerocopy: update to v0.8.54
rust: zerocopy: update to v0.8.52
rust: allow `clippy::unwrap_or_default` globally
rust: allow `suspicious_runtime_symbol_definitions` lint for Rust >= 1.98
