The "amd-seattle-xgbe-b.dtsi" file is included exactly once, so paste the
contents directly in proper DTSI. No functional impact.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Link: https://patch.msgid.link/20260706093523.274093-4-krzysztof.kozlowski@oss.qualcomm.com
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
The "amd-seattle-clks.dtsi" file is included exactly once, so paste the
contents directly in proper DTSI. No functional impact.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Link: https://patch.msgid.link/20260706093523.274093-3-krzysztof.kozlowski@oss.qualcomm.com
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Add support for TI BQ25792 integrated battery charger and buck-boost
converter.
It shares high-level logic of operation with the already supported
BQ25703A, but has a different register map, bit definitions and some of
the lower-level hardware states.
Signed-off-by: Alexey Charkov <alchark@flipper.net>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Link: https://patch.msgid.link/20260603-bq25792-v7-7-d487bed276d0@flipper.net
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
bci is devm-allocated. Two workers (bci->work and bci->current_worker)
dereference it. twl4030_bci_remove() disables charging and masks
interrupts. It cancels neither worker. A worker pending at remove() can
run after devm frees bci.
The USB transceiver comes from devm_usb_get_phy_by_node(). devm
unregisters its notifier only after remove() returns. A cancel_work_sync()
in remove() can then race a notifier reschedule. devm_work_autocancel()
and devm_delayed_work_autocancel() avoid that. They cancel the workers
during devm release, before bci is freed.
The current_worker is registered first, since devm will cancel in
reverse order and bci->work can reschedule current_worker.
Suggested-by: Sebastian Reichel <sre@kernel.org>
Fixes: d6ccc442b1 ("twl4030_charger: Make the driver atomic notifier safe")
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20260702172128.2001753-1-maoyixie.tju@gmail.com
Signed-off-by: Maoyi Xie <maoyixie.tju@gmail.com>
Link: https://patch.msgid.link/20260725072540.3092504-1-maoyixie.tju@gmail.com
[Move comment about order into the commit message]
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
- Update header copies of kernel headers, including const.h, fs.h,
perf_event.h, gfp_types.h, kvm.h, cpufeatures.h, rtnetlink.hp,
msr-index.h, drm.h and socket.h.
- Add some build files related to BPF skels to .gitignore.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQR2GiIUctdOfX2qHhGyPKLppCJ+JwUCamSrfQAKCRCyPKLppCJ+
J41WAQCqkEX7tpYp9F1f/lhzLjeeBc1dcvddAgrlzr/79E0Y8AD8ChH8SMc95ERH
rOrpIKhflMUQw5EazDW/AczabIZfcQs=
=2+4S
-----END PGP SIGNATURE-----
Merge tag 'perf-tools-fixes-for-v7.2-1-2026-07-25' of git://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools
Pull perf tools fixes from Arnaldo Carvalho de Melo:
- Update header copies of kernel headers, including const.h, fs.h,
perf_event.h, gfp_types.h, kvm.h, cpufeatures.h, rtnetlink.hp,
msr-index.h, drm.h and socket.h
- Add some build files related to BPF skels to .gitignore
* tag 'perf-tools-fixes-for-v7.2-1-2026-07-25' of git://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools:
tools headers: Sync KVM headers with the kernel sources
tools headers: Sync UAPI linux/fs.h with the kernel sources
perf beauty: Update copy of linux/socket.h with the kernel sources
tools headers: Sync UAPI drm/drm.h with kernel sources
tools arch x86: Sync the msr-index.h copy with the kernel sources
tools headers x86 cpufeatures: Sync with the kernel sources
tools headers: Sync linux/gfp_types.h with the kernel sources
tools headers UAPI: Sync linux/rtnetlink.h with the kernel sources
tools headers UAPI: Sync linux/const.h with the kernel sources
perf bench bpf: Add missing .gitignore file
Fix a bug in unit driver for RFC 2734 IPv4 over IEEE 1394. The driver
failed to reassemble a complete datagram when it was stored across
multiple buffer ranges in the list. Ruoyu Wang reported and fixed it.
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQQE66IEYNDXNBPeGKSsLtaWM8LwEwUCamSU6gAKCRCsLtaWM8Lw
E/B8AQDAi36W7MJ/y+pcbYA0BQHE/hsr/BbVsx3LmuR2WrHKFwD/WXat4OwVtdVc
ZkrO1gwRE263p3UGpqFEftZdS976xgw=
=z/i1
-----END PGP SIGNATURE-----
Merge tag 'firewire-fixes-7.2-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394
Pull firewire fix from Takashi Sakamoto:
"Fix a bug in unit driver for RFC 2734 IPv4 over IEEE 1394.
The driver failed to reassemble a complete datagram when it was stored
across multiple buffer ranges in the list. Ruoyu Wang reported and
fixed it"
* tag 'firewire-fixes-7.2-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394:
firewire: net: Fix fragmented datagram reassembly
-----BEGIN PGP SIGNATURE-----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=BlSV
-----END PGP SIGNATURE-----
Merge tag 'loongarch-fixes-7.2-1' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson
Pull LoongArch fixes from Huacai Chen:
- fix build warnings and errors
- move jump_label_init() before parse_early_param()
- retrieve CPU package ID from PPTT when available
- fix some bugs kgdb, BPF JIT and laptop platform driver bugs
* tag 'loongarch-fixes-7.2-1' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson:
platform/loongarch: laptop: Explicitly reset bl_powered state when suspend
platform/loongarch: laptop: Stop setting acpi_device_class()
LoongArch: BPF: Fix memory leak in bpf_jit_free()
LoongArch: BPF: Zero-extend signed ALU32 div/mod results
LoongArch: Fix oops during single-step debugging
LoongArch: Fix address space mismatch in kexec command line lookup
LoongArch: Retrieve CPU package ID from PPTT when available
LoongArch: Move jump_label_init() before parse_early_param()
LoongArch: Fix build errors due to wrong instructions for 32BIT
LoongArch: Increase TASK_STRUCT_OFFSET up to 2040 for 32BIT
The MT7986 driver registers two separate platform drivers (mt7986a and
mt7986b) and used to call arch_initcall() twice, once for each.
This is fine while the driver is built-in, but a single translation unit
can only provide one module_init(). Since arch_initcall() expands to
module_init() when built as a module, having two of them would break the
module build with a redefinition of init_module()/__inittest().
Fold both platform drivers into a single driver array and register them
from one initcall using platform_register_drivers(), matching the shape of
the other MediaTek pinctrl SoC drivers. platform_register_drivers() also
rolls back the first registration if the second one fails.
No functional change for built-in builds; this is a preparatory cleanup
for enabling module builds.
Signed-off-by: Justin Yeh <justin.yeh@mediatek.com>
Reviewed-by: Chen-Yu Tsai <wenst@chromium.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Linus Walleij <linusw@kernel.org>
The MediaTek SoC pinctrl drivers link against the shared implementations
in pinctrl-mtk-common.c (v1), pinctrl-moore.c and pinctrl-mtmips.c. These
were built-in only: their Kconfig symbols were bool, they did not export
their entry points and they carried no MODULE_LICENSE().
To let the individual SoC drivers be built as loadable modules (required
for Android GKI + vendor_dlkm, where vendor drivers must live outside the
GKI vmlinux), the shared code they depend on has to be modular too.
Otherwise selecting a SoC driver as =m forces the common symbol to =y and
the resulting module fails to link against the unexported common entry
points.
Convert PINCTRL_MTK, PINCTRL_MTK_MOORE and PINCTRL_MTK_MTMIPS to
tristate, export the entry points used by the SoC drivers, and add
MODULE_DESCRIPTION()/MODULE_LICENSE() to the three common files.
The v2 common code (PINCTRL_MTK_V2) is already modular, but mtk_rmw() was
never exported. It is called directly by SoC drivers such as mt7623, so
export it as well to keep those drivers linking once they are modular.
Rather than exporting these shared symbols into the global namespace,
export them in the "MTK_PINCTRL" symbol namespace with
EXPORT_SYMBOL_NS_GPL() so they are only visible to drivers that opt in.
Each SoC driver that uses them therefore declares
MODULE_IMPORT_NS("MTK_PINCTRL").
Signed-off-by: Justin Yeh <justin.yeh@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Linus Walleij <linusw@kernel.org>
mtk_eint_do_init() creates an IRQ domain, populates it with a mapping for
every EINT line and installs a chained handler on the parent interrupt,
but none of these are ever released. This was harmless while the drivers
were built-in, but now that they can be built as modules and
unbound/rmmod'd it leaves behind a dangling IRQ domain, interrupt mappings
whose chip data points at freed memory, and a chained handler that keeps
firing into that freed data.
The plain allocations in mtk_eint_do_init() already use the device-managed
devm_*() helpers, so tear the remaining resources down the same way:
register a devm action that detaches the chained handler, waits for any
in-flight handler to finish, disposes of the per-line mappings and removes
the IRQ domain. This mirrors the device-managed lifecycle adopted for the
GPIO chip and keeps the whole EINT setup self-cleaning on unbind.
Fixes: e46df235b4 ("pinctrl: mediatek: refactor EINT related code for all MediaTek pinctrl can fit")
Signed-off-by: Justin Yeh <justin.yeh@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Linus Walleij <linusw@kernel.org>
The gpio_chip is allocated with device-managed memory but registered with
the non-managed gpiochip_add_data(). This was harmless while the drivers
were built-in, but once they can be built as modules and unbound/rmmod'd,
devm frees the gpio_chip's memory while it is still registered, causing a
use-after-free.
Register it with devm_gpiochip_add_data() so it shares the same
device-managed lifecycle, which also lets the manual gpiochip_remove()
error paths go away.
Fixes: a6df410d42 ("pinctrl: mediatek: Add Pinctrl/GPIO driver for mt8135.")
Fixes: 805250982b ("pinctrl: mediatek: add pinctrl-paris that implements the vendor dt-bindings")
Fixes: e78d57b2f8 ("pinctrl: mediatek: add pinctrl-moore that implements the generic pinctrl dt-bindings")
Signed-off-by: Justin Yeh <justin.yeh@mediatek.com>
Reviewed-by: Chen-Yu Tsai <wenst@chromium.org>
Signed-off-by: Linus Walleij <linusw@kernel.org>
While booting with KHO, the following crash was observed:
BUG: unable to handle page fault for address: ff19164fffff8328
RIP: 0010:__free_one_page+0x1a1/0x6b0
Call Trace:
<TASK>
[<ffffffff913208bf>] free_one_page+0xaf/0x240
[<ffffffff93973288>] deferred_free_pages+0xa8/0xd0
[<ffffffff93971b4f>] deferred_init_memmap_chunk+0x10f/0x1b0
[<ffffffff9396e265>] padata_mt_helper+0x65/0xa0
[<ffffffff90fac402>] process_scheduled_works+0x202/0x410
[<ffffffff90fae739>] worker_thread+0x1f9/0x2d0
[<ffffffff90fb62fd>] kthread+0x27d/0x2f0
[<ffffffff90fae540>] ? __pfx_worker_thread+0x10/0x10
[<ffffffff90fb6080>] ? __pfx_kthread+0x10/0x10
[<ffffffff90efdc55>] ret_from_fork+0x145/0x280
[<ffffffff90fb6080>] ? __pfx_kthread+0x10/0x10
[<ffffffff90e2e46a>] ret_from_fork_asm+0x1a/0x30
</TASK>
deferred_init_memmap_chunk() interleaves initialization of struct pages
with freeing them. This works fine without KHO because free regions
will never be buddy neighbors. However, with KHO, free memory will be split
into (free && scratch) and (free && !scratch), that can be buddy neighbors.
KHO scratch is aligned to CMA_MIN_ALIGNMENT_PAGES pages but buddy looks
at the neighborhood of MAX_ORDER_NR_PAGES pages. These values are
configurable but CMA_MIN_ALIGNMENT_PAGES is always less or equal to
MAX_ORDER_NR_PAGES. In the crashing configuration they were set as
follows:
CMA_MIN_ALIGNMENT_PAGES = 1 << 9
MAX_ORDER_NR_PAGES = 1 << 10
So while freeing one chunk, buddy accessed uninitialized struct pages
from another chunk, tried to merge the blocks and crashed.
To fix this, let's just align KHO scratch to MAX_ORDER_NR_PAGES pages.
Fixes: c6073743d0 ("kho: make preserved pages compatible with deferred struct page init")
Signed-off-by: Michal Clapinski <mclapinski@google.com>
Link: https://patch.msgid.link/20260717134028.2880508-1-mclapinski@google.com
[rppt: massaged the changelog]
Signed-off-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
LUO keeps track of successful retrieve attempts on an FLB. It does so
to avoid multiple retrievals of the same FLB. Multiple retrievals cause
problems because once the FLB is retrieved, the serialized data
structures are likely freed and the FLB is likely in a very different
state from what the code expects.
All this works well when retrieve succeeds. When it fails,
luo_flb_retrieve_one() returns the error immediately, without ever
storing anywhere that a retrieve was attempted or what its error code
was. If the user attempts to retrieve another file registered with the
same FLB, LUO will attempt to call the FLB's retrieve() callback again.
The retry is problematic for much of the same reasons listed above. The
FLB is likely in a very different state than what the retrieve logic
normally expects (e.g. some KHO pages may have already been restored and
freed).
There is no sane way of attempting the retrieve again. Remember the
error retrieve returned and directly return it on a retry.
This is done by changing the retrieved bool to a retrieve_status
integer. A value of 0 means retrieve was never attempted, a positive
value means it succeeded, and a negative value means it failed and the
error code is the value.
This is similar to commit f85b1c6af5 ("liveupdate: luo_file: remember
retrieve() status") which did the same for LUO files.
Fixes: cab056f2aa ("liveupdate: luo_flb: introduce File-Lifecycle-Bound global state")
Assisted-by: Gemini:gemini-3-pro-preview
Signed-off-by: David Matlack <dmatlack@google.com>
Reviewed-by: Pasha Tatashin <pasha.tatashin@soleen.com>
Reviewed-by: Pratyush Yadav (Google) <pratyush@kernel.org>
Link: https://patch.msgid.link/20260528174140.1921129-3-dmatlack@google.com
Signed-off-by: Pasha Tatashin <pasha.tatashin@soleen.com>
Signed-off-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
Increment the outgoing FLB refcount in liveupdate_flb_get_outgoing() so
that the FLB structure cannot be freed while the caller is actively
using it. Add an additional liveupdate_flb_put_outgoing() function so
the caller can explicitly indicate when it is done using the outgoing
FLB.
During a Live Update, the kernel may need to fetch the outgoing FLB
outside of the scope of a file handler's preserve() and unpreserve()
callbacks. In that situation there is no way for the caller to protect
itself against the outgoing FLB from being freed while it is using it.
Incrementing the reference count in liveupdate_flb_get_outgoing()
ensures it cannot be freed.
This change also aligns the outgoing FLB lifecycle management with the
incoming FLB, since the latter uses the same get/put semantics.
Fixes: cab056f2aa ("liveupdate: luo_flb: introduce File-Lifecycle-Bound global state")
Assisted-by: Gemini:gemini-3-pro-preview
Signed-off-by: David Matlack <dmatlack@google.com>
Reviewed-by: Pasha Tatashin <pasha.tatashin@soleen.com>
Link: https://patch.msgid.link/20260528174140.1921129-2-dmatlack@google.com
Signed-off-by: Pasha Tatashin <pasha.tatashin@soleen.com>
Signed-off-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
The UAPI documents liveupdate_session_finish::reserved as requiring zero,
but luo_session_finish() currently ignores it and finishes the session.
Accepting nonzero values prevents the field from being safely repurposed
by a future extension.
Reject nonzero reserved values before changing session state, matching
LIVEUPDATE_SESSION_GET_NAME.
Fixes: 16cec0d265 ("liveupdate: luo_session: add ioctls for file preservation")
Assisted-by: Codex:gpt-5.6-sol
Reviewed-by: Pratyush Yadav (Google) <pratyush@kernel.org>
Signed-off-by: Jackie Liu <liuyun01@kylinos.cn>
Link: https://patch.msgid.link/20260716012607.22020-2-liu.yun@linux.dev
Signed-off-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
Currently, PINCTRL_S32G2 selects PINCTRL_S32CC which needs GPIOLIB, without
selecting or depending on GPIOLIB.
However, other similar options in this subsystem actually select GPIOLIB
instead of depending, so I think we can do the same here.
This unmet dependency was found by kconfirm, a static analysis tool for
Kconfig.
Fixes: 94cb9e8f27 ("pinctrl: s32cc: implement GPIO functionality")
Signed-off-by: Julian Braha <julianbraha@gmail.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Linus Walleij <linusw@kernel.org>
Commit 6e3b067d3c ("arm64: dts: mediatek: mt7622: Align GPIO hog
name with bindings") renamed the asm_sel GPIO hog to asm-sel-hog to
follow the GPIO hog naming convention, but the mt7622 pinctrl binding
only allows child nodes matching '-pins(-[a-z]+)?$', causing a
dtbs_check warning:
mt7622-bananapi-bpi-r64.dtb: pinctrl@10211000 (mediatek,mt7622-pinctrl):
'asm-sel-hog' does not match any of the regexes:
'-pins(-[a-z]+)?$', '^pinctrl-[0-9]+$'
Allow gpio-hog nodes in the pinctrl node, following the same pattern
as commit 9322da935c ("dt-bindings: pinctrl: mt7988: allow
gpio-hogs").
Signed-off-by: Chen-Yu Yeh <chenyou910331@gmail.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Linus Walleij <linusw@kernel.org>
drivers/pinctrl/pinctrl-bm1880.c initialises its pinconf_ops with
.is_generic = true, but that field is only present when
CONFIG_GENERIC_PINCONF is enabled (guarded by #ifdef in pinconf.h).
The Kconfig entry for PINCTRL_BM1880 never selects GENERIC_PINCONF,
so any config that enables CONFIG_PINCTRL_BM1880=y without
CONFIG_GENERIC_PINCONF=y fails to compile:
drivers/pinctrl/pinctrl-bm1880.c:1288:10: error: 'const struct pinconf_ops' has no member named 'is_generic'
Found by randconfig testing on arm64; tinyconfig reproducer below.
Add the missing select to fix the build.
Fixes: 49bd61ebce ("pinctrl: Add pinconf support for BM1880 SoC")
Cc: stable@vger.kernel.org
Signed-off-by: Benjamin Boortz <bennib@mailbox.org>
Signed-off-by: Linus Walleij <linusw@kernel.org>
commit 6bc3462a0f ("pinctrl: amd: Mask wake bits on probe again")
introduced a regression where Wake-on-LAN no longer works after suspend
or shutdown on some AMD platforms.
Firmware-programmed S4 wake bits for devices like PCIe NICs using PCI
PME are cleared at probe, but nothing restores them. Unlike S0i3/S3 wake
sources that use enable_irq_wake() -> amd_gpio_irq_set_wake(), PCIe PME
does not use GPIO IRQ infrastructure and relies on firmware configuration.
The original intent of commit 6bc3462a0f ("pinctrl: amd: Mask wake
bits on probe again") was to clear spurious wake bits left by firmware
to prevent unwanted wakeups. However, S4 wake bits are used for
hardware-level wake sources like WoL that bypass the kernel's IRQ wake
API.
Fix by preserving S4 wake bits at probe and only clearing S0i3/S3 bits:
- Firmware-configured S4 wake sources (WoL) continue working
- Kernel maintains control of S3/S0i3 wake policy via set_wake()
- S3-only wake sources work correctly per commit f31f33dbb3 ("pinctrl:
amd: Take suspend type into consideration which pins are non-wake")
The trade-off is that firmware-programmed spurious S4 wake bits remain
set, but this is less problematic than breaking WoL.
Fixes: 6bc3462a0f ("pinctrl: amd: Mask wake bits on probe again")
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Linus Walleij <linusw@kernel.org>
The driver calls ocelot_regmap_from_resource() via <linux/mfd/ocelot.h>,
which internally uses devm_regmap_init_mmio() and requires REGMAP_MMIO.
The Kconfig entry does not select REGMAP_MMIO, causing a build failure
when no other driver in the config happens to pull in REGMAP_MMIO:
include/linux/mfd/ocelot.h:34:24: error: implicit declaration of function 'devm_regmap_init_mmio'
Found by randconfig testing on arm64; tinyconfig reproducer below.
Fixes: 2afbbab45c ("pinctrl: microchip-sgpio: update to support regmap")
Cc: stable@vger.kernel.org
Signed-off-by: Benjamin Boortz <bennib@mailbox.org>
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Signed-off-by: Linus Walleij <linusw@kernel.org>
dt_remember_or_free_map() duplicates dev_name for each map entry. If
kstrdup_const() fails, dt_free_map() frees dev_name in all num_maps
entries, including entries that have not been initialized.
Some pinctrl drivers, including pinctrl-imx, allocate the map with
kmalloc() and leave dev_name for the core to initialize. The untouched
entries therefore contain uninitialized data which is passed to
kfree_const().
Reproduced on qemu's mcimx6ul-evk (pinctrl-imx) with failslab injection
while binding the pinctrl-consuming device, under KASAN:
BUG: KASAN: double-free in dt_free_map+0x34/0xa4
Free of addr c425a900 by task init/1
kfree from dt_free_map+0x34/0xa4
dt_free_map from dt_remember_or_free_map+0x184/0x198
dt_remember_or_free_map from pinctrl_dt_to_map+0x33c/0x4c8
pinctrl_dt_to_map from create_pinctrl+0x9c/0x5c0
Initialize all dev_name fields to NULL before duplicating the device
name, making the full-map cleanup safe after a partial failure.
Fixes: be4c60b563 ("pinctrl: devicetree: Avoid taking direct reference to device name string")
Cc: stable@vger.kernel.org
Assisted-by: Claude:claude-fable-5
Signed-off-by: Karl Mehltretter <kmehltretter@gmail.com>
Signed-off-by: Linus Walleij <linusw@kernel.org>
A userspace-driven ALSA timer (SND_UTIMER) lets an unprivileged user set
the backing snd_timer's hardware resolution to an arbitrary 64-bit value
via SNDRV_TIMER_IOCTL_CREATE. snd_utimer_create() only rejects zero.
When such a timer is bound to a sequencer queue, initialize_timer()
computes the tick period as
tmr->ticks = 1000000000 / (r * freq);
where r is that user-controlled resolution and freq is the sequencer
update rate in Hz, clamped to MIN_FREQUENCY..MAX_FREQUENCY (10..6250).
A resolution of 2^63 makes the 64-bit product r * freq wrap to zero for
any even freq, including DEFAULT_FREQUENCY (1000), so the division faults
with a divide-by-zero.
The division runs under tmr->lock with interrupts disabled, so the oops
leaves the spinlock held and hangs the CPU. It is reachable by an
unprivileged user with access to /dev/snd/timer and /dev/snd/seq.
Oops: divide error: 0000 [#1] SMP KASAN PTI
CPU: 7 UID: 1000 PID: 456 Comm: alsa_seq_utimer Not tainted 7.2.0-rc4+
RIP: 0010:initialize_timer.constprop.0+0x20a/0x2d0
snd_seq_timer_start+0x15e/0x2b0
snd_seq_control_queue+0x56f/0xba0
snd_seq_write+0x3e0/0x730
Reject an overflowing product with check_mul_overflow() and fall back to
a single tick, which also avoids feeding a wrapped-but-nonzero divisor
(e.g. 2^63 * 1000 mod 2^64 == 0, or other resolutions wrapping to a small
value) into the period computation.
Fixes: 37745918e0 ("ALSA: timer: Introduce virtual userspace-driven timers")
Cc: <stable@vger.kernel.org>
Assisted-by: Claude:claude-opus-4-8
Signed-off-by: Norbert Szetei <norbert@doyensec.com>
Link: https://patch.msgid.link/DF8A3844-AD5E-4B8A-9CFC-BD83C212BA38@doyensec.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
iforce_process_packet() reads fixed fields from joystick, wheel and
status packets without first checking their lengths. In particular, the
shared hats-and-buttons helper unconditionally reads data[6]. The status
tail is a sequence of 16-bit effect addresses, but an incomplete final
address is also consumed. A successful zero-length USB URB additionally
reads the packet ID before the common parser is called.
Reject the zero-length USB transfer, require the seven-byte joystick and
wheel prefixes and the two-byte status prefix, and consume only complete
status-tail addresses.
Signed-off-by: Pengpeng Hou <pengpeng@iscas.ac.cn>
Link: https://patch.msgid.link/20260720115018.75045-1-pengpeng@iscas.ac.cn
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
-----BEGIN PGP SIGNATURE-----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=m0rQ
-----END PGP SIGNATURE-----
Merge tag 'block-7.2-20260724' of git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux
Pull block fixes from Jens Axboe:
- Fix a ublk recovery hang, where END_USER_RECOVERY without a
successful START_USER_RECOVERY could be satisfied by a stale
completion latch
- Fix a stack out-of-bounds read in the CDROMVOLCTRL ioctl
- MAINTAINERS email address update for Roger Pau Monne
* tag 'block-7.2-20260724' of git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux:
MAINTAINERS: update my email address
cdrom: fix stack out-of-bounds read in CDROMVOLCTRL
ublk: wait on ublk_dev_ready() instead of ub->completion
-----BEGIN PGP SIGNATURE-----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=pQDU
-----END PGP SIGNATURE-----
Merge tag 'io_uring-7.2-20260724' of git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux
Pull io_uring fixes from Jens Axboe:
- Fix a missing ERESTARTSYS conversion in the read paths, which got
messed up back when some code consolidation was done for read
multishot support
- zcrx UAPI rename, dropping the abbreviated "notif" naming in favor of
"event" for consistency and to be less ambiguous for users. This was
added for 7.2, so let's rename it while we still can. No functional
or code changes, just a strict rename
* tag 'io_uring-7.2-20260724' of git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux:
io_uring/zcrx: rename notif to event
io_uring/zcrx: rename ZCRX_NOTIF_NO_BUFFERS
io_uring/zcrx: drop "notif" from stats struct names
io_uring/rw: fix missing ERESTARTSYS conversion in read paths
In ftrace, the trace_parser structure is allocated and initialized when
a trace file is opened, and is subsequently used across write and release
handlers to parse user input.
The affected handler paths and their specific functions are:
- Open paths: ftrace_regex_open(), ftrace_graph_open()
- Write paths: ftrace_regex_write(), ftrace_graph_write()
- Release paths: ftrace_regex_release(), ftrace_graph_release()
If userspace opens a trace file descriptor and shares it across multiple
threads, concurrent write calls will race on the parser's internal state,
specifically the 'idx', 'cont', and 'buffer' fields, leading to corrupted
input or undefined behavior.
Fix this by adding a global mutex, parser_lock, to serialize all access
to trace_parser across write and release paths, preventing concurrent
corruption of parser state.
Fixes: e704eff3ff ("ftrace: Have set_graph_function handle multiple functions in one write")
Fixes: 689fd8b65d ("tracing: trace parser support for function and graph")
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/20260725024721.1983675-1-wutengda@huaweicloud.com
Signed-off-by: Tengda Wu <wutengda@huaweicloud.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
- Fix tcp_bpf_sendmsg() error path mistaking a concurrently-freed
sk_psock->cork for the local temporary message and freeing it
again. (Chengfeng Ye)
- Reject passing scalar NULL to nonnull arg of a global subprog.
Previously the verifier did not account for the cases directly
passing scalars to a global subprog, e.g.: 'global_func(0);'
would pass even if 'global_func' argument was marked nonnull.
(Amery Hung)
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRINyQBqoQUC24dy5htleuBPyPTXgUCamPsBwAKCRBtleuBPyPT
Xo/uAP0YR6/9em1W/sZnss6Wkwfwd9NdmmlrJqSlt7aq+A+W7AD/V5HbigM4pJ76
CZFkKvnzhhU3dSXm/dBT1/GGJbL4pwo=
=uzKM
-----END PGP SIGNATURE-----
Merge tag 'bpf-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf
Pull bpf fixes from Eduard Zingerman:
- Fix tcp_bpf_sendmsg() error path mistaking a concurrently-freed
sk_psock->cork for the local temporary message and freeing it again
(Chengfeng Ye)
- Reject passing scalar NULL to nonnull arg of a global subprog.
Previously the verifier did not account for the cases directly
passing scalars to a global subprog, e.g.: 'global_func(0);' would
pass even if 'global_func' argument was marked nonnull (Amery Hung)
* tag 'bpf-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
bpf, sockmap: Fix cork use-after-free in tcp_bpf_sendmsg()
selftests/bpf: Test passing scalar NULL to nonnull global subprog
bpf: Reject passing scalar NULL to nonnull arg of a global subprog
RTL8211F require at least 50ms deassert to guarantee the register
access, 10ms is only enough for the PHY reset.
Fixes: cfe5c91cb7 ("riscv: dts: spacemit: k3: Initial support for CoM260-IFX board")
Signed-off-by: Inochi Amaoto <inochiama@gmail.com>
Link: https://patch.msgid.link/20260710063314.1030249-2-inochiama@gmail.com
Signed-off-by: Yixun Lan <dlan@kernel.org>
RTL8211F require at least 50ms deassert to guarantee the register
access, 10ms is only enough for the PHY reset.
Fixes: 74657a3769 ("riscv: dts: spacemit: Add ethernet device for K3")
Signed-off-by: Inochi Amaoto <inochiama@gmail.com>
Reviewed-by: Yixun Lan <dlan@kernel.org>
Tested-by: E Shattow <e@freeshell.de>
Link: https://patch.msgid.link/20260710063314.1030249-1-inochiama@gmail.com
Signed-off-by: Yixun Lan <dlan@kernel.org>
psxpad_spi_suspend() retrieves the controller state with
spi_get_drvdata(), but probe never stores it, so suspend dereferences a
NULL pointer. Store it during probe.
Fixes: 8be193c7b1 ("Input: add support for PlayStation 1/2 joypads connected via SPI")
Signed-off-by: Linmao Li <lilinmao@kylinos.cn>
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/20260721055551.1714965-1-lilinmao@kylinos.cn
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Convert the Texas Instruments TPS65217 and TPS65218 Power Button
bindings to DT schema.
Signed-off-by: Eduard Bostina <egbostina@gmail.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Link: https://patch.msgid.link/20260723100605.628882-4-egbostina@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
charlieplex_keypad_scan_line() currently ignores the return value of
gpiod_direction_output() when setting the active output line for scanning.
If setting the GPIO direction fails (e.g. on I2C/SPI GPIO expanders or
hardware errors), the function continues to sleep and read input values
from an improperly configured GPIO line.
Fix this by capturing the return value of gpiod_direction_output() and
returning the error code immediately if it fails.
Fixes: 2ca45e57ea ("Input: charlieplex_keypad - add GPIO charlieplex keypad")
Signed-off-by: Surendra Singh Chouhan <kr494167@gmail.com>
Link: https://patch.msgid.link/20260723022943.9337-1-kr494167@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
The firmware record parser checks that the record address starts within
the programmable map, but does not check that the complete record data
fits in that map. A record near the end of the map can therefore make
the copy to pmap exceed its destination span.
Check the record length against the remaining programmable map range
before copying the record data.
Fixes: 7b5bb55d0d ("Input: add support for Azoteq IQS550/572/525")
Signed-off-by: Pengpeng Hou <pengpeng@iscas.ac.cn>
Link: https://patch.msgid.link/20260715083850.32155-1-pengpeng@iscas.ac.cn
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
TI BQ25630 is a battery charger that is I2C controlled. Despite its
model name, it is rather different from the other devices in the BQ256xx
family; it has a completely different register layout and some other
additional functionality (see the datasheet for more details [1]).
The most "annoying" thing is that it has two different register lengths:
8-bit and 16-bit. Moreover, the 16-bit registers are further partitioned
into either being little- or big-endian... Luckily, `regmap` has support
for multiple `regmap_config`s (by setting unique names). Therefore, use
three different `regmap_config`s for the corresponding registers. ADC
functionality has been left out, due to it not having any real-world
use-cases.
The `enum power_supply_property` values are straightforward to map. Some
properties are clamped (e.g. voltage/current ranges). Common
`bq25630_read/write_limit()` functions for this are therefore suitable.
Interrupts are sent whenever a state change is detected. Save the state
status registers in `bq25630_data` and `memcmp()` this in order to
decide if `power_supply_changed()` should be called or not. The actual
state values are in (and fetched from) the other
`power_supply_property`-mapped registers.
[1] https://www.ti.com/lit/gpn/bq25630
Signed-off-by: Waqar Hameed <waqar.hameed@axis.com>
Link: https://patch.msgid.link/ca5228dc74705adf96f0af5363ccb65bb965640b.1782683551.git.waqar.hameed@axis.com
[Set power-supply type to POWER_SUPPLY_TYPE_USB]
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
-----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEEjF9xRqF1emXiQiqU1w0aZmrPKyEFAmpiQwsACgkQ1w0aZmrP
KyEYhhAAqWpGxZnyCNSRSb1HudQOUIIud4yyPdCtTuSMqSol8WW0lPGxs9woJs01
vT2pbcDg0gnMMPzTCpIY/cj38aFQ5kB1wLn1/rj1XiPxUA2sqpT7vU+6kceGYj7m
HR0jpvw40b6CgMfQjVjLl1Qdv98LixAgGIskERMuBL64BCt9ZZwpNfbafCRoFYBg
/R3ehDJivpVbgWifgq2cIsEurEX2q/apEDtn+nO/e9Uv4RcLLOqsEprcR8NaZNns
Mbv8ZkxeqJ0m2yccz3NcESydLBrapZ0DQjAadxx9i6ApbdbxYo1ApajSl/7HbW7y
WgW1lO40T+Ngp6GtW7bgJnTkedcNb26RApdhXgH+IwNUqQiKq4Lv8LE+U3FyJFed
wf442yo6k7jPz0orc9RLsTOJkayR1IwOSV5n05sk7/NMWS3WL8ToCf3L6rk/FonW
7doZtEj8i8womCgovep5Ct+3q9Mpud2/vzQAquaHT2mPWraKM/ywlClH4N7XO1fx
jNWohXqsuB/BgkV78yOy4GRqEqQHDIl0B850MoKDiPhH2YgMyuR5lbR97fHsFFp8
VzEbTa/6AAs8WIFk79DNNnWNgX4z1YuVBXsqQmHD7T/wxOc1CT8xEm1zKJu4lhJf
DXxz8jOa4gH5SKchXGRhPrKYE0Am+2eX5KjASI+lSrxJsN+dzWM=
=5ouZ
-----END PGP SIGNATURE-----
Merge tag 'nf-26-07-23' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf
Pablo Neira Ayuso says:
====================
Netfilter/IPVS fixes for net
The following batch contains Netfilter/IPVS fixes for net. This batch
includes a mix of IPVS follow ups related to Sashiko reports, as well as
crash fixes for connection tracking expectation, helpers, ipset and
nf_tables mostly for old bugs. This also includes a fix for the
flowtable tunnel selftest.
1) Use s32 instead of s16 to calculate the remaining payload containing
SIP messages, otherwise underflow is possible allowing out-of-bound
memory access beyond the skb->data area. From Xiang Mei.
2) Fix the counter check in the flowtable selftest for tunnels, from
Lorenzo Bianconi.
3) Add and use nf_ct_expect_related_pair() to add the RTP and RTCP
expectations under the expectation lock, this is required by the SIP
and H.323 NAT helpers. This fixes a possible reinsertion of an
expectation with the DEAD flag set on while looping to find
consecutive ports.
4) Fix ipset UaF during table resize by blocking comment updates on
kernel-side adds. From David Lee.
5) Do not propagate the IP_VS_CONN_F_ONE_PACKET flag when using IPVS
state synchronization, otherwise reaching stale freed from
ip_vs_conn struct is possible, Zhiling Zou.
6) Adjust the hn1 hash node when the forwarding method changes between
MASQ and non-MASQ for an already hashed connection. This can leave
stale hash nodes pointing to a freed struct ip_vs_conn and trigger
UaF while reading /proc/net/ip_vs_conn. From Julian Anastasov.
7) nft_object rhltable needs to be per table, just like chain rhltable,
otherwise UaF from object lookup path while netns is being released.
There is also the nlevent path that can reach stale objects. Placing
this rhltable under the table hierarchy fixes this issue.
8) Reject invalid combined usage of hashlimit tables with and without
XT_HASHLIMIT_RATE_MATCH flag mode, otherwise access to uninitialized
.burst field of dsthash_ent is possible.
9) Fix checksum validations in IPVS performed from LOCAL_IN,
from Julian Anastasov.
10) Fix incorrect packet offset to layer 4 protocol in IPVS, uncovered
by Sashiko, from Julian Anastasov.
11) Skip the mangling of ICMP replies for non-first fragments, also
reported by Sashiko. Also from Julian.
12) Clear ip_vs_conn flags under the spinlock to fix a possible data
race. From Julian Anastasov.
13) Fix incorrect calculation of the payload bitmask in the nf_tables
hardware offload support, leading to UBSAN splat. From Xiang Mei.
* tag 'nf-26-07-23' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf:
netfilter: nft_payload: fix mask build for partial field offload
ipvs: clear the nfct flag under lock
ipvs: do not mangle ICMP replies for non-first fragments
ipvs: fix places with wrong packet offsets
ipvs: fix the checksum validations
netfilter: xt_hashlimit: validate hashtable supports XT_HASHLIMIT_RATE_MATCH
netfilter: nf_tables: make nft_object rhltable per table
ipvs: adjust double hashing when fwd method changes
ipvs: do not propagate one-packet flag to synced conns
netfilter: ipset: do not update comments from kernel-side hash adds
netfilter: nf_conntrack_expect: add and use nf_ct_expect_related_pair()
selftests: netfilter: nft_flowtable.sh: fix offload counter verification for tunnel tests
netfilter: nf_conntrack_sip: widen NAT rewrite delta to s32 in sip_help_tcp()
====================
Link: https://patch.msgid.link/20260723163910.274695-1-pablo@netfilter.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
A frag_list skb can reach veth with data_len set but nr_frags zero.
veth_convert_skb_to_xdp_buff() only converts skbs that are shared,
locked, have frags[], or do not have enough headroom. It later uses
skb_is_nonlinear() to decide whether to set XDP_FLAGS_HAS_FRAGS and
xdp_frags_size.
That exposes frag_list data to XDP as if it were stored in frags[], but
frags[] is empty. AF_XDP copy mode can then trust the bogus XDP fragment
metadata, walk an empty fragment entry, and crash in memcpy() from
__xsk_rcv().
Route non-linear skbs through skb_pp_cow_data() before exposing them to
XDP, and only advertise XDP frags when the resulting skb has frags[].
skb_copy_bits() already handles frag_list input, and skb_pp_cow_data()
builds frags[] output with skb_add_rx_frag(), which is the
representation XDP multi-buffer expects.
Fixes: 718a18a0c8 ("veth: Rework veth_xdp_rcv_skb in order to accept non-linear skb")
Cc: stable@vger.kernel.org
Signed-off-by: Matt Fleming <mfleming@cloudflare.com>
Reviewed-by: Toke Høiland-Jørgensen <toke@toke.dk>
Acked-by: Lorenzo Bianconi <lorenzo@kernel.org>
Link: https://patch.msgid.link/20260722191925.2192070-1-matt@readmodwrite.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
