Using node paths to extend or override a device tree node is error
prone. If there was a typo error, a new node will be created instead of
extending the existing node. This will lead to run-time errors that
could be hard to detect.
A mistyped label on the other hand, will cause a dtc compile error
(during build time). This also reduces the indentation making the code
easier to read.
The pre/post DTBS are the same.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20220810080516.166866-1-krzysztof.kozlowski@linaro.org
[Description]
We only want to commit the SubVP config to DMCUB
after the main and phantom pipe programming has
completed. Commiting the state early can cause
issues such as P-State being allowed by the HW
early which causes the SubVP state machine to
go into a bad state
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Brian Chang <Brian.Chang@amd.com>
Signed-off-by: Alvin Lee <Alvin.Lee2@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The double reset power-on sequence is a workaround for the hardware
flaw in some chip that SPI Clock output glitch and cause internal MPU
unable to read firmware correctly. The sequence is suggested in ps8640
application note.
Signed-off-by: Hsin-Yi Wang <hsinyi@chromium.org>
Reviewed-by: Rock Chiu <rock.chiu@paradetech.corp-partner.google.com>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220815093905.134164-1-hsinyi@chromium.org
[Why & How]
In some cases, there are calls to transition from TX_ON to TX_ON. This is
expected, so do not assert. However, these are redundant, so return
prematurely.
Reviewed-by: Alvin Lee <Alvin.Lee2@amd.com>
Acked-by: Brian Chang <Brian.Chang@amd.com>
Signed-off-by: Taimur Hassan <Syed.Hassan@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
DIG_FIFO_ERROR = 1 caused mst daisy chain 2nd monitor black.
[How]
We need to set dig fifo read start level = 7 before dig fifo reset during dig
fifo enable according to hardware designer's suggestion. If it is zero, it will
cause underflow or overflow and DIG_FIFO_ERROR = 1.
Reviewed-by: Alvin Lee <Alvin.Lee2@amd.com>
Reviewed-by: Aric Cyr <Aric.Cyr@amd.com>
Acked-by: Brian Chang <Brian.Chang@amd.com>
Signed-off-by: Wang Fudong <Fudong.Wang@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add nodes for the gpi_dma0 and gpi_dma1 which are (optionally) used for
various i2c busses based on the qup firmware configuration.
Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20220812082721.1125759-4-luca.weiss@fairphone.com
[Why]
In amdgpu_cs_ioctl, amdgpu_job_free could be performed ealier if there
is -ERESTARTSYS error. In this case, job->hw_fence could be not
initialized yet. Putting hw_fence during amdgpu_job_free could lead to a
use-after-free warning.
[How]
Check if drm_sched_job_init is performed before job_free by checking
s_fence.
v2: Check hw_fence.ops instead since it could be NULL if fence is not
initialized. Reverse the condition since !=NULL check is discouraged in
kernel.
Signed-off-by: YuBiao Wang <YuBiao.Wang@amd.com>
Reviewed-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
When ODM is enabled, H timing control register reset
to 0. Div mode manual field get overwritten causing
no display on certain modes for dcn314.
[How]
Use REG_UPDATE instead of REG_SET to set div_mode
field.
Reviewed-by: Charlene Liu <Charlene.Liu@amd.com>
Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Acked-by: Brian Chang <Brian.Chang@amd.com>
Signed-off-by: Duncan Ma <duncan.ma@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
LTTPR caps will read fail if aux channel is not active.
[How]
1.Perform 600 read upto 10 retry with 1ms delay in between.
2.If fail, return false and trigger another retry detection.
3.If pass, read LTTPR caps in retrieve link caps.
Reviewed-by: Jimmy Kizito <Jimmy.Kizito@amd.com>
Acked-by: Brian Chang <Brian.Chang@amd.com>
Signed-off-by: Lewis Huang <Lewis.Huang@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Each index in the DPSTREAMCLK_CNTL register
phyiscally maps 1-to-1 with HPO stream encoder
instance. On the other hand, each index in
DTBCLK_P_CNTL physically maps 1-to-1 with OTG
instance.
Current DCN32 DPSTREAMCLK_CLK programing assumes
that OTG instance always maps 1-to-1 with
HPO stream encoder instance. This is not always
guaranteed and can result in blackscreen.
[How]
Program the correct dpstreamclk instance with
the correct dtbclk_p source.
Reviewed-by: Ariel Bernstein <Eric.Bernstein@amd.com>
Acked-by: Brian Chang <Brian.Chang@amd.com>
Signed-off-by: George Shen <george.shen@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Description]
There can be SubVP scheduling issues if a SubVP
display is chosen has ActiveDramClockChangeLatency > 0.
Block this case for now, and enable Vactive case
(later) to handle this.
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Brian Chang <Brian.Chang@amd.com>
Signed-off-by: Alvin Lee <Alvin.Lee2@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why & How]
Add addtional check in CalculateODMMode for cases where the ODM combine
is needed due to number of DSC slices.
Reviewed-by: Alvin Lee <alvin.lee2@amd.com>
Acked-by: Brian Chang <Brian.Chang@amd.com>
Signed-off-by: Taimur Hassan <Syed.Hassan@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add missing pci_disable_device() if amdgpu_device_resume() fails.
Fixes: 8e4d5d43cc ("drm/amdgpu: Handling of amdgpu_device_resume return value for graceful teardown")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fixes the following smatch warning:
drivers/gpu/drm/amd/amdgpu/../display/dc/dc_dmub_srv.c:311 dc_dmub_srv_p_state_delegate()
warn: variable dereferenced before check 'dc' (see line 309)
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: sunliming <sunliming@kylinos.cn>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Return the value sdma_v5_2_start() directly instead of storing it in
another redundant variable.
Reported-by: Zeal Robot <zealci@zte.com.cn>
Signed-off-by: ye xingchen <ye.xingchen@zte.com.cn>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
New GFX11 MES FW adds the trap_en bit. For now hardcode to 1 (traps
enabled).
Signed-off-by: Graham Sider <Graham.Sider@amd.com>
Acked-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Harish Kasiviswanathan <Harish.Kasiviswanathan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Below driver load error will be printed, not friendly to end user.
amdgpu: ATOM BIOS: 113-D603GLXE-077
[drm] FRU: Failed to get size field
[drm:amdgpu_fru_get_product_info [amdgpu]] *ERROR* Failed to read FRU Manufacturer, ret:-5
Signed-off-by: Guchun Chen <guchun.chen@amd.com>
Reviewed-by: Kent Russell <kent.russell@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
SDM845 is a special case compared to the other platforms that use RPMh
stats, since it only has 2 stats (aosd and cxsd), while the others have
a 3rd one (ddr).
So lets add the node but with a SDM845 dedicated compatible to make
the driver aware of the different stats config.
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Tested-by: Caleb Connolly <caleb.connolly@linaro.org>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20220812101240.1869605-3-abel.vesa@linaro.org
Like on the other platforms that provide RPMh stats, on SDM845, the
aoss_qmp reg size needs to be reduced to its actual size of 0x400,
otherwise it will overlap with the RPMh stats reg base, node that will
be added later on.
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20220812101240.1869605-1-abel.vesa@linaro.org
SDM845 is a special case compared to the other platforms that use RPMh
stats, since it only has 2 stats (aosd and cxsd), while the others have
a 3rd one (ddr).
So in order for the driver to use the dedicated stats config, we added
the SDM845 dedicated compatible, which we document here.
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20220812101240.1869605-4-abel.vesa@linaro.org
SDM845 is a special case compared to the other platforms that use RPMh
stats, since it only has 2 stats (aosd and cxsd), while the others have
a 3rd one (ddr).
So lets add dedicated stats config and compatible for SDM845 to make the
driver aware of this num_records difference.
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20220812101240.1869605-2-abel.vesa@linaro.org
The TCSR mutex bindings allow device to be described only with address
space (so it uses MMIO, not syscon regmap). This seems reasonable as
TCSR mutex is actually a dedicated IO address space and it also fixes DT
schema checks:
qcom/sm8150-mtp.dtb: hwlock: 'reg' is a required property
qcom/sm8150-mtp.dtb: hwlock: 'syscon' does not match any of the regexes: 'pinctrl-[0-9]+'
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20220819083209.50844-17-krzysztof.kozlowski@linaro.org
The TCSR halt regs are next to TCSR mutex (in one address block called
TCSR_MUTEX), so before converting the TCSR mutex into device with
address space, we need to split the halt regs to its own syscon device.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20220819083209.50844-16-krzysztof.kozlowski@linaro.org
The TCSR mutex bindings allow device to be described only with address
space (so it uses MMIO, not syscon regmap). This seems reasonable as
TCSR mutex is actually a dedicated IO address space and it also fixes DT
schema checks:
qcom/sdm636-sony-xperia-ganges-mermaid.dtb: hwlock: 'reg' is a required property
qcom/sdm636-sony-xperia-ganges-mermaid.dtb: hwlock: 'syscon' does not match any of the regexes: 'pinctrl-[0-9]+'
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20220819083209.50844-15-krzysztof.kozlowski@linaro.org
The TCSR halt regs are next to TCSR mutex (in one address block called
TCSR_MUTEX), so before converting the TCSR mutex into device with
address space, we need to split the halt regs to its own syscon device.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20220819083209.50844-14-krzysztof.kozlowski@linaro.org
The TCSR mutex bindings allow device to be described only with address
space (so it uses MMIO, not syscon regmap). This seems reasonable as
TCSR mutex is actually a dedicated IO address space and it also fixes DT
schema checks:
qcom/qcs404-evb-4000.dtb: hwlock: 'reg' is a required property
qcom/qcs404-evb-4000.dtb: hwlock: 'syscon' does not match any of the regexes: 'pinctrl-[0-9]+'
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20220819083209.50844-13-krzysztof.kozlowski@linaro.org
The TCSR mutex bindings allow device to be described only with address
space (so it uses MMIO, not syscon regmap). This seems reasonable as
TCSR mutex is actually a dedicated IO address space and it also fixes DT
schema checks:
qcom/sdm845-shift-axolotl.dtb: hwlock: 'reg' is a required property
qcom/sdm845-shift-axolotl.dtb: hwlock: 'syscon' does not match any of the regexes: 'pinctrl-[0-9]+'
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20220819083209.50844-12-krzysztof.kozlowski@linaro.org
The TCSR halt regs are next to TCSR mutex (in one address block called
TCSR_MUTEX), so before converting the TCSR mutex into device with
address space, we need to split the halt regs to its own syscon device.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20220819083209.50844-11-krzysztof.kozlowski@linaro.org
The TCSR halt regs are next to TCSR mutex (in one address block called
TCSR_MUTEX), so before converting the TCSR mutex into device with
address space, we need to split the halt regs to its own syscon device.
This also describes more accurately the devices and their IO address
space, and allows to remove incorrect syscon compatible from TCSR mutex:
qcom/sc7280-herobrine-crd.dtb: hwlock@1f40000: compatible: ['qcom,tcsr-mutex', 'syscon'] is too long
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20220819083209.50844-10-krzysztof.kozlowski@linaro.org
The TCSR mutex bindings allow device to be described only with address
space (so it uses MMIO, not syscon regmap). This seems reasonable as
TCSR mutex is actually a dedicated IO address space and it also fixes DT
schema checks:
qcom/sc7180-trogdor-wormdingler-rev1-inx.dtb: hwlock: 'reg' is a required property
qcom/sc7180-trogdor-wormdingler-rev1-inx.dtb: hwlock: 'syscon' does not match any of the regexes: 'pinctrl-[0-9]+'
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20220819083209.50844-9-krzysztof.kozlowski@linaro.org
The TCSR halt regs are next to TCSR mutex (in one address block called
TCSR_MUTEX), so before converting the TCSR mutex into device with
address space, we need to split the halt regs to its own syscon device.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20220819083209.50844-8-krzysztof.kozlowski@linaro.org
TCSR syscon node should come with dedicated compatible.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20220819083209.50844-7-krzysztof.kozlowski@linaro.org
The TCSR mutex bindings allow device to be described only with address
space (so it uses MMIO, not syscon regmap). This seems reasonable as
TCSR mutex is actually a dedicated IO address space and it also fixes DT
schema checks:
qcom/msm8998-asus-novago-tp370ql.dtb: hwlock: 'reg' is a required property
qcom/msm8998-asus-novago-tp370ql.dtb: hwlock: 'syscon' does not match any of the regexes: 'pinctrl-[0-9]+'
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20220819083209.50844-6-krzysztof.kozlowski@linaro.org
The TCSR halt regs are next to TCSR mutex (in one address block called
TCSR_MUTEX), so before converting the TCSR mutex into device with
address space, we need to split the halt regs to its own syscon device.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20220819083209.50844-5-krzysztof.kozlowski@linaro.org
The TCSR mutex bindings allow device to be described only with address
space (so it uses MMIO, not syscon regmap). This seems reasonable as
TCSR mutex is actually a dedicated IO address space and it also fixes DT
schema checks:
qcom/msm8996-xiaomi-natrium.dtb: hwlock: 'reg' is a required property
qcom/msm8996-xiaomi-natrium.dtb: hwlock: 'syscon' does not match any of the regexes: 'pinctrl-[0-9]+'
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20220819083209.50844-4-krzysztof.kozlowski@linaro.org
The TCSR halt regs are next to TCSR mutex (in one address block called
TCSR_MUTEX), so before converting the TCSR mutex into device with
address space, we need to split the halt regs to its own syscon device.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20220819083209.50844-3-krzysztof.kozlowski@linaro.org
WARNING: unmet direct dependencies detected for PM_GENERIC_DOMAINS_OF
Depends on [n]: PM_GENERIC_DOMAINS [=y] && OF [=n]
Selected by [m]:
- QCOM_RPMPD [=m] && PM [=y] && QCOM_SMD_RPM [=m]
PM_GENERIC_DOMAINS_OF depends on OF, so QCOM_RPMPD also depends on it.
Fixes: 7d0221fb59 ("soc/qcom: Make QCOM_RPMPD select PM_GENERIC_DOMAINS/_OF")
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Acked-by: Randy Dunlap <rdunlap@infradead.org> # build-tested
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20220820113202.23940-1-yuehaibing@huawei.com
ipq8065 SoC is based on ipq8064-v2.0 with a more clocked CPU and
an increased voltage output with the smb208 regulators.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20220718161826.4943-3-ansuelsmth@gmail.com
ipq8062 SoC is based on ipq8064-v2.0 with lower supported freq, lack of
usb port and a reduced voltage output with the smb208 regulators.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20220718161826.4943-2-ansuelsmth@gmail.com
Add ipq8064-v2.0 dtsi variant that differ from original ipq8064 SoC for
some additional pcie, sata and usb configuration values, additional
reserved memory and serial output.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20220718161826.4943-1-ansuelsmth@gmail.com
Qualcomm PCIe devices are not really compatible with the snps,dw-pcie.
Unlike the generic IP core, they have special requirements regarding
enabling clocks, toggling resets, using the PHY, etc.
This is not to mention that platform snps-dw-pcie driver expects to find
two IRQs declared, while Qualcomm platforms use just one.
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20220506152107.1527552-7-dmitry.baryshkov@linaro.org
reg_vdd_tsp: regulator-vdd-tsp is actually used as an analog regulator for
touchscreen on all of a2015 and e2015 devices.
Rename it into reg_vdd_tsp_a: regulator-vdd-tsp-a to reduce confusion.
Signed-off-by: Lin, Meng-Bo <linmengbo0689@protonmail.com>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20220724095438.14252-1-linmengbo0689@protonmail.com
On the Samsung Galaxy E5 and E7 the touch key is supplied by a single
fixed regulator (enabled via GPIO 97) that supplies both MCU and LED.
Add it to the device tree.
Signed-off-by: Lin, Meng-Bo <linmengbo0689@protonmail.com>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20220724095426.14189-1-linmengbo0689@protonmail.com
After adding all necessary support for MSM8916 SMP/cpuidle without PSCI
on ARM32, build the Samsung Galaxy E5/E7/Grand Max device trees from the
arm64 tree together with the ARM32 include to allow booting this device on
ARM32.
The approach to include device tree files from other architectures is
inspired from e.g. the Raspberry Pi (bcm2711-rpi-4-b.dts) where this is
used to build the device tree for both ARM32 and ARM64.
Signed-off-by: Lin, Meng-Bo <linmengbo0689@protonmail.com>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20220724095413.14135-1-linmengbo0689@protonmail.com