When returning or breaking early from a
for_each_available_child_of_node() loop, we need to explicitly call
of_node_put() on the child node to possibly release the node.
Fixes: b209e047bc ("HSI: Introduce OMAP SSI driver")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
netdev_alloc_skb() has assigned ssi->netdev to skb->dev if successed,
no need to repeat assignment.
Signed-off-by: Wang Qing <wangqing@vivo.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
There are two events that signal a real change of the link state: HPD going
high means the sink is newly connected or wants the source to re-read the
EDID, RX sense going low is a indication that the link has been disconnected.
Ignore the other two events that also trigger interrupts, but don't need
immediate attention: HPD going low does not necessarily mean the link has
been lost and should not trigger a immediate read of the status. RX sense
going high also does not require a detect cycle, as HPD going high is the
right point in time to read the EDID.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> (v1)
Reviewed-by: Robert Foss <robert.foss@linaro.org>
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220826185733.3213248-1-l.stach@pengutronix.de
ctrl->auto_runtime_pm was wrongly set to true when adding
transfer_one_message() callback.
As explained in commit 6e6ccb3d4cdc ("spi: stm32-qspi: Add pm_runtime support")
the expected behavior is to prevent runtime suspends between each transfer.
Add needed pm_runtime API calls in stm32_qspi_transfer_one_message().
Fixes: a557fca630 ("spi: stm32_qspi: Add transfer_one_message() spi callback")
Signed-off-by: Patrice Chotard <patrice.chotard@foss.st.com>
Link: https://lore.kernel.org/r/20220829123250.2170562-1-patrice.chotard@foss.st.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The drm_of_lvds_get_data_mapping() returns either negative value on
error or MEDIA_BUS_FMT_* otherwise. The check for 'ret' would also
catch the positive case of MEDIA_BUS_FMT_* and lead to probe failure
every time 'data-mapping' DT property is specified.
Fixes: 7c4dd0a266 ("drm: of: Add drm_of_lvds_get_data_mapping")
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
To: dri-devel@lists.freedesktop.org
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220801125419.167562-1-marex@denx.de
There is a potential for us to hit a type conflict when including
netinet/tcp.h with sys/socket.h, we can remove these as they are not
actually needed.
Fixes errors like the below when compiling with gcc BPF backend:
In file included from /usr/include/netinet/tcp.h:91,
from progs/bind4_prog.c:10:
/home/buildroot/opt/cross/lib/gcc/bpf/13.0.0/include/stdint.h:34:23: error: conflicting types for 'int8_t'; have 'char'
34 | typedef __INT8_TYPE__ int8_t;
| ^~~~~~
In file included from /usr/include/x86_64-linux-gnu/sys/types.h:155,
from /usr/include/x86_64-linux-gnu/bits/socket.h:29,
from /usr/include/x86_64-linux-gnu/sys/socket.h:33,
from progs/bind4_prog.c:9:
/usr/include/x86_64-linux-gnu/bits/stdint-intn.h:24:18: note: previous declaration of 'int8_t' with type 'int8_t' {aka 'signed char'}
24 | typedef __int8_t int8_t;
| ^~~~~~
/home/buildroot/opt/cross/lib/gcc/bpf/13.0.0/include/stdint.h:43:24: error: conflicting types for 'int64_t'; have 'long int'
43 | typedef __INT64_TYPE__ int64_t;
| ^~~~~~~
/usr/include/x86_64-linux-gnu/bits/stdint-intn.h:27:19: note: previous declaration of 'int64_t' with type 'int64_t' {aka 'long long int'}
27 | typedef __int64_t int64_t;
| ^~~~~~~
make: *** [Makefile:537: /home/buildroot/bpf-next/tools/testing/selftests/bpf/bpf_gcc/bind4_prog.o] Error 1
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20220826052925.980431-1-james.hilliard1@gmail.com
Currently the driver only handles panel directly connected to the DPI output.
Handle the case where a bridge is connected past DPI output of this bridge.
This could be e.g. DPI to LVDS encoder chip.
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Jonas Karlman <jonas@kwiboo.se>
Cc: Laurent Pinchart <Laurent.pinchart@ideasonboard.com>
Cc: Lucas Stach <l.stach@pengutronix.de>
Cc: Maxime Ripard <maxime@cerno.tech>
Cc: Neil Armstrong <narmstrong@baylibre.com>
Cc: Robert Foss <robert.foss@linaro.org>
Cc: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Robert Foss <robert.foss@linaro.org>
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220724224317.288727-1-marex@denx.de
The av7110 driver depends on saa7146, so move it there.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Deprecate the hexium_gemini, hexium_orion, mxb and ttpci saa7146-based
drivers: these drivers do not use the vb2 framework for video streaming,
instead it uses the old videobuf framework.
We want to get rid of these old drivers, so deprecated these for future
removal.
[hverkuil: update MAINTAINERS file]
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Deprecate the dm644x_ccdc, dm355_cddc and dm365_isif davinci drivers:
all three depend on the vpfe_capture driver, and that driver does not
use the vb2 framework for video streaming, instead it uses the old
videobuf framework.
We want to get rid of these old drivers, so deprecated these for future
removal.
Note that include/media/davinci/vpfe_capture.h can't be moved to staging
since it is used in arch/arm/mach-davinci/davinci.h.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Deprecate the fsl-viu driver. This driver does not use the vb2 framework
for video streaming, instead it uses the old videobuf framework.
We want to get rid of these old drivers, so deprecated it for future
removal.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Deprecate the tm6000 driver. This driver does not use the vb2 framework
for video streaming, instead it uses the old videobuf framework.
We want to get rid of these old drivers, so deprecated it for future
removal.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Deprecate the zr364xx driver. This driver does not use the vb2 framework
for video streaming, instead it uses the old videobuf framework.
We want to get rid of these old drivers, so deprecated it for future
removal.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Deprecate the meye driver. This driver does not use the vb2 framework
for video streaming, instead it implements its own version.
We want to get rid of these old drivers, so deprecated it for future
removal.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Deprecate the cpia2 driver. This driver does not use the vb2 framework
for video streaming, instead it implements its own version.
We want to get rid of these old drivers, so deprecated it for future
removal.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Add dsi node for mt8192 SoC.
Signed-off-by: Allen-KH Cheng <allen-kh.cheng@mediatek.com>
Reviewed-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Tested-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Tested-by: Chen-Yu Tsai <wenst@chromium.org>
Link: https://lore.kernel.org/r/20220712114046.15574-6-allen-kh.cheng@mediatek.com
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
Add display nodes and gce info for mt8192 SoC.
GCE (Global Command Engine) properties to the display nodes in order to
enable the usage of the CMDQ (Command Queue), which is required for
operating the display.
Signed-off-by: Allen-KH Cheng <allen-kh.cheng@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Tested-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Tested-by: Chen-Yu Tsai <wenst@chromium.org>
Link: https://lore.kernel.org/r/20220712114046.15574-5-allen-kh.cheng@mediatek.com
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
To support reset of mmsys, we include mt8192-resets.h and add
property of #reset-cells in mmsys.
Signed-off-by: Allen-KH Cheng <allen-kh.cheng@mediatek.com>
Reviewed-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Tested-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Tested-by: Chen-Yu Tsai <wenst@chromium.org>
Link: https://lore.kernel.org/r/20220712114046.15574-4-allen-kh.cheng@mediatek.com
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
Add mipi_tx node for mt8192 SoC.
Signed-off-by: Allen-KH Cheng <allen-kh.cheng@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Tested-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Tested-by: Chen-Yu Tsai <wenst@chromium.org>
Link: https://lore.kernel.org/r/20220712114046.15574-3-allen-kh.cheng@mediatek.com
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
Add pwm node for mt8192 SoC.
Signed-off-by: Allen-KH Cheng <allen-kh.cheng@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Tested-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Tested-by: Chen-Yu Tsai <wenst@chromium.org>
Link: https://lore.kernel.org/r/20220712114046.15574-2-allen-kh.cheng@mediatek.com
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
Add a kernel config option to build deprecated media drivers
that are scheduled for removal. Move stkwebcam to the deprecated
directory to make it clear that this driver is deprecated.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
The term 'videobuf' typically refers to the old videobuf version 1
framework. Avoid using this word in drivers that are converted to
vb2.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Rename 'videobuf' to 'vb2' in the comment. This avoids confusing
terminology since 'videobuf' typically refers to the old vb1
framework.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
These terms typically refer to the old version 1 videobuf framework.
It is confusing to use them for the vb2 framework, so reword these
comments.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Reviewed-by: Lad Prabhakar <prabhakar.csengg@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
MT8186 is a SoC based on 64bit ARMv8 architecture. It contains 6 CA55
and 2 CA76 cores. MT8186 share many HW IP with MT65xx series.
We add basic chip support for MediaTek MT8186 on evaluation board.
Signed-off-by: Allen-KH Cheng <Allen-KH.Cheng@mediatek.com>
Link: https://lore.kernel.org/r/20220825170448.17024-1-allen-kh.cheng@mediatek.com
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
The stuff programmed into the wm/ddb registers of planes
on disabled pipes doesn't matter. So during readout just
leave our software state tracking for those zeroed.
This should avoid us trying too hard to clean up after
whatever mess the VBIOS/GOP left in there. The actual
hardware state will get cleaned up if/when we enable
the pipe anyway.
Cc: stable@vger.kernel.org
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/5711
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220617195948.24007-1-ville.syrjala@linux.intel.com
Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
(cherry picked from commit b183db8f47)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Commit 20f85ef89d ("drm/i915/backlight: use unique backlight device
names") added support for multiple backlight devices on dual panel
systems, but did so with error handling on -EEXIST from
backlight_device_register(). Unfortunately, that triggered a warning in
dmesg all the way down from sysfs_add_file_mode_ns() and
sysfs_warn_dup().
Instead of optimistically always attempting to register with the default
name ("intel_backlight", which we have to retain for backward
compatibility), check if a backlight device with the name exists first,
and, if so, use the card and connector based name.
v2: reworked on top of the patch commit 20f85ef89d
("drm/i915/backlight: use unique backlight device names")
v3: fixed the ref count leak(Jani N)
Fixes: 20f85ef89d ("drm/i915/backlight: use unique backlight device names")
Signed-off-by: Arun R Murthy <arun.r.murthy@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220808035750.3111046-1-arun.r.murthy@intel.com
(cherry picked from commit 4234ea3005)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
If the GuC CTs are full and we need to stall the request submission
while waiting for space, we save the stalled request and where the stall
occurred; when the CTs have space again we pick up the request submission
from where we left off.
If a full GT reset occurs, the state of all contexts is cleared and all
non-guilty requests are unsubmitted, therefore we need to restart the
stalled request submission from scratch. To make sure that we do so,
clear the saved request after a reset.
Fixes note: the patch that introduced the bug is in 5.15, but no
officially supported platform had GuC submission enabled by default
in that kernel, so the backport to that particular version (and only
that one) can potentially be skipped.
Fixes: 925dc1cf58 ("drm/i915/guc: Implement GuC submission tasklet")
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: John Harrison <john.c.harrison@intel.com>
Cc: <stable@vger.kernel.org> # v5.15+
Reviewed-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220811210812.3239621-1-daniele.ceraolospurio@intel.com
(cherry picked from commit f922fbb0f2)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Crucible + recent Mesa seems to sometimes hit:
GEM_BUG_ON(num_ccs_blks > NUM_CCS_BLKS_PER_XFER)
And it looks like we can also trigger this with gem_lmem_swapping, if we
modify the test to use slightly larger object sizes.
Looking closer it looks like we have the following issues in
migrate_copy():
- We are using plain integer in various places, which we can easily
overflow with a large object.
- We pass the entire object size (when the src is lmem) into
emit_pte() and then try to copy it, which doesn't work, since we
only have a few fixed sized windows in which to map the pages and
perform the copy. With an object > 8M we therefore aren't properly
copying the pages. And then with an object > 64M we trigger the
GEM_BUG_ON(num_ccs_blks > NUM_CCS_BLKS_PER_XFER).
So it looks like our copy handling for any object > 8M (which is our
CHUNK_SZ) is currently broken on DG2.
Fixes: da0595ae91 ("drm/i915/migrate: Evict and restore the flatccs capable lmem obj")
Testcase: igt@gem_lmem_swapping
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Cc: Ramalingam C <ramalingam.c@intel.com>
Reviewed-by: Ramalingam C<ramalingam.c@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220805132240.442747-2-matthew.auld@intel.com
(cherry picked from commit 8676145eb2)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
1. Support HDMI_I2S audio format.
2. Return 0 if there is no sink connection in .hw_param callback.
Signed-off-by: Xin Ji <xji@analogixsemi.com>
Acked-by: Hsin-Yi Wang <hsinyi@chromium.org>
Acked-by: Jiaxin Yu<jiaxin.yu@mediatek.com>
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220726033058.403715-1-xji@analogixsemi.com
It is confusing to refer to vb2 structures with 'videobuf', since
that typically is used to refer to the old videobuf version 1
framework.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
MAX_TAIL_CALL_CNT is 33, so min(MAX_TAIL_CALL_CNT, 0xffff) is always
MAX_TAIL_CALL_CNT, it is better to use MAX_TAIL_CALL_CNT directly.
At the same time, add BUILD_BUG_ON(MAX_TAIL_CALL_CNT > 0xffff) with a
comment on why the assertion is there.
Suggested-by: Daniel Borkmann <daniel@iogearbox.net>
Suggested-by: Johan Almbladh <johan.almbladh@anyfinetworks.com>
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/1661742309-2320-1-git-send-email-yangtiezhu@loongson.cn
It is confusing to use the term 'videobuf' or 'video-buf' since that
usually refers to the old videobuf version 1 framework. Rename to
'videobuf2' or vb2.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Remove the dead code under NGENE_V4L.
Among others, this removes references to the old videobuf framework
that isn't actually used by this driver.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
The zoran driver can be moved back to mainline after it has been
converted by Corentin Labbe to vb2.
Note that the zoran driver no longer supports video output, but
video capture is working fine now.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
The read/write file operations are not implemented, so no
need to set VB2_READ and VB2_WRITE flags.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Set vfl_dir correctly as a capture device instead of as
a M2M device.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Prepare for moving this driver to mainline by fixing the remaining
checkpatch issues.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>