[ Upstream commit 902e81e679 ]
The blamed commit increased the needed headroom to account for
alignment. This means that the size required to always align a Tx buffer
was added inside the dpaa2_eth_needed_headroom() function. By doing
that, a manual adjustment of the pointer passed to PTR_ALIGN() was no
longer correct since the 'buffer_start' variable was already pointing
to the start of the skb's memory.
The behavior of the dpaa2-eth driver without this patch was to drop
frames on Tx even when the headroom was matching the 128 bytes
necessary. Fix this by removing the manual adjust of 'buffer_start' from
the PTR_MODE call.
Closes: https://lore.kernel.org/netdev/70f0dcd9-1906-4d13-82df-7bbbbe7194c6@app.fastmail.com/T/#u
Fixes: f422abe3f2 ("dpaa2-eth: increase the needed headroom to account for alignment")
Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Tested-by: Mathew McBride <matt@traverse.com.au>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20251016135807.360978-1-ioana.ciornei@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e59bc32df2 ]
The ENETC RX ring uses the page halves flipping mechanism, each page is
split into two halves for the RX ring to use. And ENETC_RXB_TRUESIZE is
defined to 2048 to indicate the size of half a page. However, the page
size is configurable, for ARM64 platform, PAGE_SIZE is default to 4K,
but it could be configured to 16K or 64K.
When PAGE_SIZE is set to 16K or 64K, ENETC_RXB_TRUESIZE is not correct,
and the RX ring will always use the first half of the page. This is not
consistent with the description in the relevant kernel doc and commit
messages.
This issue is invisible in most cases, but if users want to increase
PAGE_SIZE to receive a Jumbo frame with a single buffer for some use
cases, it will not work as expected, because the buffer size of each
RX BD is fixed to 2048 bytes.
Based on the above two points, we expect to correct ENETC_RXB_TRUESIZE
to (PAGE_SIZE >> 1), as described in the comment.
Fixes: d4fd0404c1 ("enetc: Introduce basic PF and VF ENETC ethernet drivers")
Signed-off-by: Wei Fang <wei.fang@nxp.com>
Reviewed-by: Claudiu Manoil <claudiu.manoil@nxp.com>
Link: https://patch.msgid.link/20251016080131.3127122-1-wei.fang@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 50bd33f6b3 ]
After applying the workaround for err050089, the LS1028A platform
experiences RCU stalls on RT kernel. This issue is caused by the
recursive acquisition of the read lock enetc_mdio_lock. Here list some
of the call stacks identified under the enetc_poll path that may lead to
a deadlock:
enetc_poll
-> enetc_lock_mdio
-> enetc_clean_rx_ring OR napi_complete_done
-> napi_gro_receive
-> enetc_start_xmit
-> enetc_lock_mdio
-> enetc_map_tx_buffs
-> enetc_unlock_mdio
-> enetc_unlock_mdio
After enetc_poll acquires the read lock, a higher-priority writer attempts
to acquire the lock, causing preemption. The writer detects that a
read lock is already held and is scheduled out. However, readers under
enetc_poll cannot acquire the read lock again because a writer is already
waiting, leading to a thread hang.
Currently, the deadlock is avoided by adjusting enetc_lock_mdio to prevent
recursive lock acquisition.
Fixes: 6d36ecdbc4 ("net: enetc: take the MDIO lock only once per NAPI poll cycle")
Signed-off-by: Jianpeng Chang <jianpeng.chang.cn@windriver.com>
Acked-by: Wei Fang <wei.fang@nxp.com>
Link: https://patch.msgid.link/20251015021427.180757-1-jianpeng.chang.cn@windriver.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit bf29555f5b ]
Creating FDB entries is possible from a non-initial user namespace when
having CAP_NET_ADMIN, yet, when deleting FDB entries, processes receive
an EPERM because the capability is always checked against the initial
user namespace. This restricts the FDB management from unprivileged
containers.
Drop the netlink_capable check in rtnl_fdb_del as it was originally
dropped in c5c351088a and reintroduced in 1690be63a2 without
intention.
This patch was tested using a container on GyroidOS, where it was
possible to delete FDB entries from an unprivileged user namespace and
private network namespace.
Fixes: 1690be63a2 ("bridge: Add vlan support to static neighbors")
Reviewed-by: Michael Weiß <michael.weiss@aisec.fraunhofer.de>
Tested-by: Harshal Gohel <hg@simonwunderlich.de>
Signed-off-by: Johannes Wiesböck <johannes.wiesboeck@aisec.fraunhofer.de>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org>
Link: https://patch.msgid.link/20251015201548.319871-1-johannes.wiesboeck@aisec.fraunhofer.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit aaf043a568 ]
When building with Clang 20 or newer, there are some objtool warnings
from unexpected fallthroughs to other functions:
vmlinux.o: warning: objtool: mlx5e_mpwrq_mtts_per_wqe() falls through to next function mlx5e_mpwrq_max_num_entries()
vmlinux.o: warning: objtool: mlx5e_mpwrq_max_log_rq_size() falls through to next function mlx5e_get_linear_rq_headroom()
LLVM 20 contains an (admittedly problematic [1]) optimization [2] to
convert divide by zero into the equivalent of __builtin_unreachable(),
which invokes undefined behavior and destroys code generation when it is
encountered in a control flow graph.
mlx5e_mpwrq_umr_entry_size() returns 0 in the default case of an
unrecognized mlx5e_mpwrq_umr_mode value. mlx5e_mpwrq_mtts_per_wqe(),
which is inlined into mlx5e_mpwrq_max_log_rq_size(), uses the result of
mlx5e_mpwrq_umr_entry_size() in a divide operation without checking for
zero, so LLVM is able to infer there will be a divide by zero in this
case and invokes undefined behavior. While there is some proposed work
to isolate this undefined behavior and avoid the destructive code
generation that results in these objtool warnings, code should still be
defensive against divide by zero.
As the WARN_ONCE() implies that an invalid value should be handled
gracefully, return 1 instead of 0 in the default case so that the
results of this division operation is always valid.
Fixes: 168723c1f8 ("net/mlx5e: xsk: Use umr_mode to calculate striding RQ parameters")
Link: https://lore.kernel.org/CAGG=3QUk8-Ak7YKnRziO4=0z=1C_7+4jF+6ZeDQ9yF+kuTOHOQ@mail.gmail.com/ [1]
Link: 37932643ab [2]
Closes: https://github.com/ClangBuiltLinux/linux/issues/2131
Closes: https://github.com/ClangBuiltLinux/linux/issues/2132
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20251014-mlx5e-avoid-zero-div-from-mlx5e_mpwrq_umr_entry_size-v1-1-dc186b8819ef@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1ebe8f7e78 ]
Commit e3f1164fc9 ("PM: EM: Support late CPUs booting and capacity
adjustment") added a mechanism to handle CPUs that come up late by
retrying when any of the `cpufreq_cpu_get()` call fails.
However, if there are holes in the CPU topology (offline CPUs, e.g.
nosmt), the first missing CPU causes the loop to break, preventing
subsequent online CPUs from being updated.
Instead of aborting on the first missing CPU policy, loop through all
and retry if any were missing.
Fixes: e3f1164fc9 ("PM: EM: Support late CPUs booting and capacity adjustment")
Suggested-by: Kenneth Crudup <kenneth.crudup@gmail.com>
Reported-by: Kenneth Crudup <kenneth.crudup@gmail.com>
Link: https://lore.kernel.org/linux-pm/40212796-734c-4140-8a85-854f72b8144d@panix.com/
Cc: 6.9+ <stable@vger.kernel.org> # 6.9+
Signed-off-by: Christian Loehle <christian.loehle@arm.com>
Link: https://patch.msgid.link/20250831214357.2020076-1-christian.loehle@arm.com
[ rjw: Drop the new pr_debug() message which is not very useful ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 3e3ba654d3 ]
Move the check of the CPU capacity currently stored in the energy model
against the arch_scale_cpu_capacity() value to em_adjust_new_capacity()
so it will be done regardless of where the latter is called from.
This will be useful when a new em_adjust_new_capacity() caller is added
subsequently.
While at it, move the pd local variable declaration in
em_check_capacity_update() into the loop in which it is used.
No intentional functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Lukasz Luba <lukasz.luba@arm.com>
Tested-by: Christian Loehle <christian.loehle@arm.com>
Reviewed-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
Link: https://patch.msgid.link/7810787.EvYhyI6sBW@rjwysocki.net
Stable-dep-of: 1ebe8f7e78 ("PM: EM: Fix late boot with holes in CPU topology")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit a8e62726ac ]
Every iteration of the loop over all possible CPUs in
em_check_capacity_update() causes get_cpu_device() to be called twice
for the same CPU, once indirectly via em_cpu_get() and once directly.
Get rid of the indirect get_cpu_device() call by moving the direct
invocation of it earlier and using em_pd_get() instead of em_cpu_get()
to get a pd pointer for the dev one returned by it.
This also exposes the fact that dev is needed to get a pd, so the code
becomes somewhat easier to follow after it.
No functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Lukasz Luba <lukasz.luba@arm.com>
Link: https://patch.msgid.link/1925950.tdWV9SEqCh@rjwysocki.net
Stable-dep-of: 1ebe8f7e78 ("PM: EM: Fix late boot with holes in CPU topology")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 5fad775d43 ]
The max_cap parameter is never used in em_adjust_new_capacity(), so
drop it.
No functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Lukasz Luba <lukasz.luba@arm.com>
Link: https://patch.msgid.link/2369979.ElGaqSPkdT@rjwysocki.net
Stable-dep-of: 1ebe8f7e78 ("PM: EM: Fix late boot with holes in CPU topology")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit ee916dccd4 ]
This pattern isn't very documented, and apparently not used much outside
of 'make tools/help', but it has existed for over a decade (since commit
ea01fa9f63: "tools: Connect to the kernel build system").
However, it doesn't work very well for most cases, particularly the
useful "tools/all" target, because it overrides the LDFLAGS value with
an empty one.
And once overridden, 'make' will then not honor the tooling makefiles
trying to change it - which then makes any LDFLAGS use in the tooling
directory break, typically causing odd link errors.
Remove that LDFLAGS override, since it seems to be entirely historical.
The core kernel makefiles no longer modify LDFLAGS as part of the build,
and use kernel-specific link flags instead (eg 'KBUILD_LDFLAGS' and
friends).
This allows more of the 'make tools/*' cases to work. I say 'more',
because some of the tooling build rules make various other assumptions
or have other issues, so it's still a bit hit-or-miss. But those issues
tend to show up with the 'make -C tools xyz' pattern too, so now it's no
longer an issue of this particular 'tools/*' build rule being special.
Acked-by: Nathan Chancellor <nathan@kernel.org>
Cc: Nicolas Schier <nicolas@fjasle.eu>
Cc: Borislav Petkov <bp@alien8.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1b53426334 ]
If we want to invalidate a remote key we should do that as soon as
possible, so do it in the first send work request.
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Cc: Steve French <smfrench@gmail.com>
Cc: Tom Talpey <tom@talpey.com>
Cc: linux-cifs@vger.kernel.org
Cc: samba-technical@lists.samba.org
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 43de0ac332 ]
Event ID is only using the attr::config bit [7, 0] but we check the
event range using the whole 64bit field. It blocks the usage of the
rest field of attr::config. Relax the check by only using the
bit [7, 0].
Acked-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Signed-off-by: Yicong Yang <yangyicong@hisilicon.com>
Signed-off-by: Yushan Wang <wangyushan12@huawei.com>
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9316512b71 ]
PAGE_KERNEL_TEXT is an old macro that is used to tell kernel whether
kernel text has to be mapped read-only or read-write based on build
time options.
But nowadays, with functionnalities like jump_labels, static links,
etc ... more only less all kernels need to be read-write at some
point, and some combinations of configs failed to work due to
innacurate setting of PAGE_KERNEL_TEXT. On the other hand, today
we have CONFIG_STRICT_KERNEL_RWX which implements a more controlled
access to kernel modifications.
Instead of trying to keep PAGE_KERNEL_TEXT accurate with all
possible options that may imply kernel text modification, always
set kernel text read-write at startup and rely on
CONFIG_STRICT_KERNEL_RWX to provide accurate protection.
Do this by passing PAGE_KERNEL_X to map_kernel_page() in
__maping_ram_chunk() instead of passing PAGE_KERNEL_TEXT. Once
this is done, the only remaining user of PAGE_KERNEL_TEXT is
mmu_mark_initmem_nx() which uses it in a call to setibat().
As setibat() ignores the RW/RO, we can seamlessly replace
PAGE_KERNEL_TEXT by PAGE_KERNEL_X here as well and get rid of
PAGE_KERNEL_TEXT completely.
Reported-by: Erhard Furtner <erhard_f@mailbox.org>
Closes: https://lore.kernel.org/all/342b4120-911c-4723-82ec-d8c9b03a8aef@mailbox.org/
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Tested-by: Andrew Donnellan <ajd@linux.ibm.com>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/8e2d793abf87ae3efb8f6dce10f974ac0eda61b8.1757412205.git.christophe.leroy@csgroup.eu
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 28c4d9bc07 ]
In gdlm_put_lock(), there is a small window of time in which the
DFL_UNMOUNT flag has been set but the lockspace hasn't been released,
yet. In that window, dlm may still call gdlm_ast() and gdlm_bast().
To prevent it from dereferencing freed glock objects, only free the
glock if the lockspace has actually been released.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Reviewed-by: Andrew Price <anprice@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f4d4ebc849 ]
The `ID_AA64MMFR4_EL1.EIESB` field, is an unsigned enumeration, but was
incorrectly defined as a `SignedEnum` when introduced in commit
cfc680bb04 ("arm64: sysreg: Add layout for ID_AA64MMFR4_EL1"). This is
corrected to `UnsignedEnum`.
Conversely, the `ID_AA64DFR0_EL1.DoubleLock` field, is a signed
enumeration, but was incorrectly defined as an `UnsignedEnum`. This is
corrected to `SignedEnum`, which wasn't correctly set when annotated as
such in commit ad16d4cf0b ("arm64/sysreg: Initial unsigned annotations
for ID registers").
Signed-off-by: Fuad Tabba <tabba@google.com>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 00e58ff924 ]
In preparation for the future commit ("bitops: Add __attribute_const__ to generic
ffs()-family implementations"), which allows GCC's value range tracker
to see past ffs(), GCC 8 on ARM thinks that it might be possible that
"ffs(rq) - 8" used here:
v = FIELD_PREP(PCI_EXP_DEVCTL_READRQ, ffs(rq) - 8);
could wrap below 0, leading to a very large value, which would be out of
range for the FIELD_PREP() usage:
drivers/pci/pci.c: In function 'pcie_set_readrq':
include/linux/compiler_types.h:572:38: error: call to '__compiletime_assert_471' declared with attribute error: FIELD_PREP: value too large for the field
...
drivers/pci/pci.c:5896:6: note: in expansion of macro 'FIELD_PREP'
v = FIELD_PREP(PCI_EXP_DEVCTL_READRQ, ffs(rq) - 8);
^~~~~~~~~~
If the result of the ffs() is bounds checked before being used in
FIELD_PREP(), the value tracker seems happy again. :)
Reported-by: Linux Kernel Functional Testing <lkft@linaro.org>
Closes: https://lore.kernel.org/linux-pci/CA+G9fYuysVr6qT8bjF6f08WLyCJRG7aXAeSd2F7=zTaHHd7L+Q@mail.gmail.com/
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20250905052836.work.425-kees@kernel.org
Signed-off-by: Kees Cook <kees@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9282bc905f ]
If Catalog File contains corrupted record for the case of
hidden directory's type, regard it as I/O error instead of
Invalid argument.
Signed-off-by: Yangtao Li <frank.li@vivo.com>
Reviewed-by: Viacheslav Dubeyko <slava@dubeyko.com>
Link: https://lore.kernel.org/r/20250805165905.3390154-1-frank.li@vivo.com
Signed-off-by: Viacheslav Dubeyko <slava@dubeyko.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2048ec5b98 ]
The syzbot reported issue in hfs_find_set_zero_bits():
=====================================================
BUG: KMSAN: uninit-value in hfs_find_set_zero_bits+0x74d/0xb60 fs/hfs/bitmap.c:45
hfs_find_set_zero_bits+0x74d/0xb60 fs/hfs/bitmap.c:45
hfs_vbm_search_free+0x13c/0x5b0 fs/hfs/bitmap.c:151
hfs_extend_file+0x6a5/0x1b00 fs/hfs/extent.c:408
hfs_get_block+0x435/0x1150 fs/hfs/extent.c:353
__block_write_begin_int+0xa76/0x3030 fs/buffer.c:2151
block_write_begin fs/buffer.c:2262 [inline]
cont_write_begin+0x10e1/0x1bc0 fs/buffer.c:2601
hfs_write_begin+0x85/0x130 fs/hfs/inode.c:52
cont_expand_zero fs/buffer.c:2528 [inline]
cont_write_begin+0x35a/0x1bc0 fs/buffer.c:2591
hfs_write_begin+0x85/0x130 fs/hfs/inode.c:52
hfs_file_truncate+0x1d6/0xe60 fs/hfs/extent.c:494
hfs_inode_setattr+0x964/0xaa0 fs/hfs/inode.c:654
notify_change+0x1993/0x1aa0 fs/attr.c:552
do_truncate+0x28f/0x310 fs/open.c:68
do_ftruncate+0x698/0x730 fs/open.c:195
do_sys_ftruncate fs/open.c:210 [inline]
__do_sys_ftruncate fs/open.c:215 [inline]
__se_sys_ftruncate fs/open.c:213 [inline]
__x64_sys_ftruncate+0x11b/0x250 fs/open.c:213
x64_sys_call+0xfe3/0x3db0 arch/x86/include/generated/asm/syscalls_64.h:78
do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline]
do_syscall_64+0xd9/0x210 arch/x86/entry/syscall_64.c:94
entry_SYSCALL_64_after_hwframe+0x77/0x7f
Uninit was created at:
slab_post_alloc_hook mm/slub.c:4154 [inline]
slab_alloc_node mm/slub.c:4197 [inline]
__kmalloc_cache_noprof+0x7f7/0xed0 mm/slub.c:4354
kmalloc_noprof include/linux/slab.h:905 [inline]
hfs_mdb_get+0x1cc8/0x2a90 fs/hfs/mdb.c:175
hfs_fill_super+0x3d0/0xb80 fs/hfs/super.c:337
get_tree_bdev_flags+0x6e3/0x920 fs/super.c:1681
get_tree_bdev+0x38/0x50 fs/super.c:1704
hfs_get_tree+0x35/0x40 fs/hfs/super.c:388
vfs_get_tree+0xb0/0x5c0 fs/super.c:1804
do_new_mount+0x738/0x1610 fs/namespace.c:3902
path_mount+0x6db/0x1e90 fs/namespace.c:4226
do_mount fs/namespace.c:4239 [inline]
__do_sys_mount fs/namespace.c:4450 [inline]
__se_sys_mount+0x6eb/0x7d0 fs/namespace.c:4427
__x64_sys_mount+0xe4/0x150 fs/namespace.c:4427
x64_sys_call+0xfa7/0x3db0 arch/x86/include/generated/asm/syscalls_64.h:166
do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline]
do_syscall_64+0xd9/0x210 arch/x86/entry/syscall_64.c:94
entry_SYSCALL_64_after_hwframe+0x77/0x7f
CPU: 1 UID: 0 PID: 12609 Comm: syz.1.2692 Not tainted 6.16.0-syzkaller #0 PREEMPT(none)
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 07/12/2025
=====================================================
The HFS_SB(sb)->bitmap buffer is allocated in hfs_mdb_get():
HFS_SB(sb)->bitmap = kmalloc(8192, GFP_KERNEL);
Finally, it can trigger the reported issue because kmalloc()
doesn't clear the allocated memory. If allocated memory contains
only zeros, then everything will work pretty fine.
But if the allocated memory contains the "garbage", then
it can affect the bitmap operations and it triggers
the reported issue.
This patch simply exchanges the kmalloc() on kzalloc()
with the goal to guarantee the correctness of bitmap operations.
Because, newly created allocation bitmap should have all
available blocks free. Potentially, initialization bitmap's read
operation could not fill the whole allocated memory and
"garbage" in the not initialized memory will be the reason of
volume coruptions and file system driver bugs.
Reported-by: syzbot <syzbot+773fa9d79b29bd8b6831@syzkaller.appspotmail.com>
Closes: https://syzkaller.appspot.com/bug?extid=773fa9d79b29bd8b6831
Signed-off-by: Viacheslav Dubeyko <slava@dubeyko.com>
cc: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
cc: Yangtao Li <frank.li@vivo.com>
cc: linux-fsdevel@vger.kernel.org
Link: https://lore.kernel.org/r/20250820230636.179085-1-slava@dubeyko.com
Signed-off-by: Viacheslav Dubeyko <slava@dubeyko.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6af515c9f3 ]
Force values over 3 are undefined, so don't treat them as 3.
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c62663a986 ]
Potenatially, __hfs_ext_read_extent() could operate by
not initialized values of fd->key after hfs_brec_find() call:
static inline int __hfs_ext_read_extent(struct hfs_find_data *fd, struct hfs_extent *extent,
u32 cnid, u32 block, u8 type)
{
int res;
hfs_ext_build_key(fd->search_key, cnid, block, type);
fd->key->ext.FNum = 0;
res = hfs_brec_find(fd);
if (res && res != -ENOENT)
return res;
if (fd->key->ext.FNum != fd->search_key->ext.FNum ||
fd->key->ext.FkType != fd->search_key->ext.FkType)
return -ENOENT;
if (fd->entrylength != sizeof(hfs_extent_rec))
return -EIO;
hfs_bnode_read(fd->bnode, extent, fd->entryoffset, sizeof(hfs_extent_rec));
return 0;
}
This patch changes kmalloc() on kzalloc() in hfs_find_init()
and intializes fd->record, fd->keyoffset, fd->keylength,
fd->entryoffset, fd->entrylength for the case if hfs_brec_find()
has been found nothing in the b-tree node.
Signed-off-by: Viacheslav Dubeyko <slava@dubeyko.com>
cc: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
cc: Yangtao Li <frank.li@vivo.com>
cc: linux-fsdevel@vger.kernel.org
Link: https://lore.kernel.org/r/20250818225252.126427-1-slava@dubeyko.com
Signed-off-by: Viacheslav Dubeyko <slava@dubeyko.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 18b07c44f2 ]
Currently, hfs_brec_remove() executes moving records
towards the location of deleted record and it updates
offsets of moved records. However, the hfs_brec_remove()
logic ignores the "mess" of b-tree node's free space and
it doesn't touch the offsets out of records number.
Potentially, it could confuse fsck or driver logic or
to be a reason of potential corruption cases.
This patch reworks the logic of hfs_brec_remove()
by means of clearing freed space of b-tree node
after the records moving. And it clear the last
offset that keeping old location of free space
because now the offset before this one is keeping
the actual offset to the free space after the record
deletion.
Signed-off-by: Viacheslav Dubeyko <slava@dubeyko.com>
cc: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
cc: Yangtao Li <frank.li@vivo.com>
cc: linux-fsdevel@vger.kernel.org
Link: https://lore.kernel.org/r/20250815194918.38165-1-slava@dubeyko.com
Signed-off-by: Viacheslav Dubeyko <slava@dubeyko.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a20b83cf45 ]
On nios2, with CONFIG_FLATMEM set, the kernel relies on
memblock_get_current_limit() to determine the limits of mem_map, in
particular for max_low_pfn.
Unfortunately, memblock.current_limit is only default initialized to
MEMBLOCK_ALLOC_ANYWHERE at this point of the bootup, potentially leading
to situations where max_low_pfn can erroneously exceed the value of
max_pfn and, thus, the valid range of available DRAM.
This can in turn cause kernel-level paging failures, e.g.:
[ 76.900000] Unable to handle kernel paging request at virtual address 20303000
[ 76.900000] ea = c0080890, ra = c000462c, cause = 14
[ 76.900000] Kernel panic - not syncing: Oops
[ 76.900000] ---[ end Kernel panic - not syncing: Oops ]---
This patch fixes this by pre-calculating memblock.current_limit
based on the upper limits of the available memory ranges via
adjust_lowmem_bounds, a simplified version of the equivalent
implementation within the arm architecture.
Signed-off-by: Simon Schuster <schuster.simon@siemens-energy.com>
Signed-off-by: Andreas Oetken <andreas.oetken@siemens-energy.com>
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5e08824837 ]
In the setup_arg_pages(), ret is declared as an unsigned long.
The ret might take a negative value. Therefore, its type should
be changed to int.
Signed-off-by: Xichao Zhao <zhao.xichao@vivo.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20250825073609.219855-1-zhao.xichao@vivo.com
Signed-off-by: Kees Cook <kees@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Upstream commit b7cb9a0343 ("dmaengine: idxd: Fix refcount underflow
on module unload") fixes a refcount underflow by replacing the call to
idxd_cleanup() in the remove function with direct cleanup calls. That works
fine upstream. However, upstream removed support for IOMMU_DEV_FEAT_IOPF,
which is still supported in v6.12.y. The backport of commit b7cb9a0343
into v6.12.y misses the call to disable it. This results in a warning
backtrace when unloading and reloading the module.
WARNING: CPU: 0 PID: 665849 at drivers/pci/ats.c:337 pci_reset_pri+0x4c/0x60
...
RIP: 0010:pci_reset_pri+0xa7/0x130
Add the missing cleanup call to fix the problem.
Fixes: ce81905bec ("dmaengine: idxd: Fix refcount underflow on module unload")
Cc: Yi Sun <yi.sun@intel.com>
Cc: Shuai Xue <xueshuai@linux.alibaba.com>
Cc: Dave Jiang <dave.jiang@intel.com>
Cc: Vinicius Costa Gomes <vinicius.gomes@intel.com>
Cc: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Acked-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 0c33aa1804 upstream.
Neoverse-V3AE is also affected by erratum #3312417, as described in its
Software Developer Errata Notice (SDEN) document:
Neoverse V3AE (MP172) SDEN v9.0, erratum 3312417
https://developer.arm.com/documentation/SDEN-2615521/9-0/
Enable the workaround for Neoverse-V3AE, and document this.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: James Morse <james.morse@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Ryan Roberts <ryan.roberts@arm.com>
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 3bbf004c48 upstream.
Add cputype definitions for Neoverse-V3AE. These will be used for errata
detection in subsequent patches.
These values can be found in the Neoverse-V3AE TRM:
https://developer.arm.com/documentation/SDEN-2615521/9-0/
... in section A.6.1 ("MIDR_EL1, Main ID Register").
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: James Morse <james.morse@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Ryan Roberts <ryan.roberts@arm.com>
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Ryan Roberts <ryan.roberts@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit f04aad36a0 upstream.
syzkaller discovered the following crash: (kernel BUG)
[ 44.607039] ------------[ cut here ]------------
[ 44.607422] kernel BUG at mm/userfaultfd.c:2067!
[ 44.608148] Oops: invalid opcode: 0000 [#1] SMP DEBUG_PAGEALLOC KASAN NOPTI
[ 44.608814] CPU: 1 UID: 0 PID: 2475 Comm: reproducer Not tainted 6.16.0-rc6 #1 PREEMPT(none)
[ 44.609635] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.3-0-ga6ed6b701f0a-prebuilt.qemu.org 04/01/2014
[ 44.610695] RIP: 0010:userfaultfd_release_all+0x3a8/0x460
<snip other registers, drop unreliable trace>
[ 44.617726] Call Trace:
[ 44.617926] <TASK>
[ 44.619284] userfaultfd_release+0xef/0x1b0
[ 44.620976] __fput+0x3f9/0xb60
[ 44.621240] fput_close_sync+0x110/0x210
[ 44.622222] __x64_sys_close+0x8f/0x120
[ 44.622530] do_syscall_64+0x5b/0x2f0
[ 44.622840] entry_SYSCALL_64_after_hwframe+0x76/0x7e
[ 44.623244] RIP: 0033:0x7f365bb3f227
Kernel panics because it detects UFFD inconsistency during
userfaultfd_release_all(). Specifically, a VMA which has a valid pointer
to vma->vm_userfaultfd_ctx, but no UFFD flags in vma->vm_flags.
The inconsistency is caused in ksm_madvise(): when user calls madvise()
with MADV_UNMEARGEABLE on a VMA that is registered for UFFD in MINOR mode,
it accidentally clears all flags stored in the upper 32 bits of
vma->vm_flags.
Assuming x86_64 kernel build, unsigned long is 64-bit and unsigned int and
int are 32-bit wide. This setup causes the following mishap during the &=
~VM_MERGEABLE assignment.
VM_MERGEABLE is a 32-bit constant of type unsigned int, 0x8000'0000.
After ~ is applied, it becomes 0x7fff'ffff unsigned int, which is then
promoted to unsigned long before the & operation. This promotion fills
upper 32 bits with leading 0s, as we're doing unsigned conversion (and
even for a signed conversion, this wouldn't help as the leading bit is 0).
& operation thus ends up AND-ing vm_flags with 0x0000'0000'7fff'ffff
instead of intended 0xffff'ffff'7fff'ffff and hence accidentally clears
the upper 32-bits of its value.
Fix it by changing `VM_MERGEABLE` constant to unsigned long, using the
BIT() macro.
Note: other VM_* flags are not affected: This only happens to the
VM_MERGEABLE flag, as the other VM_* flags are all constants of type int
and after ~ operation, they end up with leading 1 and are thus converted
to unsigned long with leading 1s.
Note 2:
After commit 31defc3b01 ("userfaultfd: remove (VM_)BUG_ON()s"), this is
no longer a kernel BUG, but a WARNING at the same place:
[ 45.595973] WARNING: CPU: 1 PID: 2474 at mm/userfaultfd.c:2067
but the root-cause (flag-drop) remains the same.
[akpm@linux-foundation.org: rust bindgen wasn't able to handle BIT(), from Miguel]
Link: https://lore.kernel.org/oe-kbuild-all/202510030449.VfSaAjvd-lkp@intel.com/
Link: https://lkml.kernel.org/r/20251001090353.57523-2-acsjakub@amazon.de
Fixes: 7677f7fd8b ("userfaultfd: add minor fault registration mode")
Signed-off-by: Jakub Acs <acsjakub@amazon.de>
Signed-off-by: Miguel Ojeda <miguel.ojeda.sandonis@gmail.com>
Acked-by: David Hildenbrand <david@redhat.com>
Acked-by: SeongJae Park <sj@kernel.org>
Tested-by: Alice Ryhl <aliceryhl@google.com>
Tested-by: Miguel Ojeda <miguel.ojeda.sandonis@gmail.com>
Cc: Xu Xin <xu.xin16@zte.com.cn>
Cc: Chengming Zhou <chengming.zhou@linux.dev>
Cc: Peter Xu <peterx@redhat.com>
Cc: Axel Rasmussen <axelrasmussen@google.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
[acsjakub@amazon.de: adjust context in bindgings_helper.h]
Signed-off-by: Jakub Acs <acsjakub@amazon.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 4b47a8601b ]
Avoid a crash if a pNFS client should happen to send a LAYOUTCOMMIT
operation on a FlexFiles layout.
Reported-by: Robert Morris <rtm@csail.mit.edu>
Closes: https://lore.kernel.org/linux-nfs/152f99b2-ba35-4dec-93a9-4690e625dccd@oracle.com/T/#t
Cc: Thomas Haynes <loghyr@hammerspace.com>
Cc: stable@vger.kernel.org
Fixes: 9b9960a0ca ("nfsd: Add a super simple flex file server")
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 2c27aaee93 ]
Do read-modify-write so that we re-use the characterized reset value as
specified in TRM [1] to program calibration wait time which defines number
of cycles to wait for after startup state machine is in bandgap enable
state.
This fixes PLL lock timeout error faced while using RPi DSI Panel on TI's
AM62L and J721E SoC since earlier calibration wait time was getting
overwritten to zero value thus failing the PLL to lockup and causing
timeout.
[1] AM62P TRM (Section 14.8.6.3.2.1.1 DPHY_TX_DPHYTX_CMN0_CMN_DIG_TBIT2):
Link: https://www.ti.com/lit/pdf/spruj83
Cc: stable@vger.kernel.org
Fixes: 7a343c8bf4 ("phy: Add Cadence D-PHY support")
Signed-off-by: Devarsh Thakkar <devarsht@ti.com>
Tested-by: Harikrishna Shenoy <h-shenoy@ti.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Link: https://lore.kernel.org/r/20250704125915.1224738-3-devarsht@ti.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 833d4313bc ]
When a first MPTCP connection gets successfully established after a
blackhole period, 'active_disable_times' was supposed to be reset when
this connection was done via any non-loopback interfaces.
Unfortunately, the opposite condition was checked: only reset when the
connection was established via a loopback interface. Fixing this by
simply looking at the opposite.
This is similar to what is done with TCP FastOpen, see
tcp_fastopen_active_disable_ofo_check().
This patch is a follow-up of a previous discussion linked to commit
893c49a78d ("mptcp: Use __sk_dst_get() and dst_dev_rcu() in
mptcp_active_enable()."), see [1].
Fixes: 27069e7cb3 ("mptcp: disable active MPTCP in case of blackhole")
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/4209a283-8822-47bd-95b7-87e96d9b7ea3@kernel.org [1]
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20250918-net-next-mptcp-blackhole-reset-loopback-v1-1-bf5818326639@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 893c49a78d ]
mptcp_active_enable() is called from subflow_finish_connect(),
which is icsk->icsk_af_ops->sk_rx_dst_set() and it's not always
under RCU.
Using sk_dst_get(sk)->dev could trigger UAF.
Let's use __sk_dst_get() and dst_dev_rcu().
Fixes: 27069e7cb3 ("mptcp: disable active MPTCP in case of blackhole")
Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20250916214758.650211-8-kuniyu@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Stable-dep-of: 833d4313bc ("mptcp: reset blackhole on success with non-loopback ifaces")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 1dbf1d590d ]
In ip_output() skb->dev is updated from the skb_dst(skb)->dev
this can become invalid when the interface is unregistered and freed,
Introduced new skb_dst_dev_rcu() function to be used instead of
skb_dst_dev() within rcu_locks in ip_output.This will ensure that
all the skb's associated with the dev being deregistered will
be transnmitted out first, before freeing the dev.
Given that ip_output() is called within an rcu_read_lock()
critical section or from a bottom-half context, it is safe to introduce
an RCU read-side critical section within it.
Multiple panic call stacks were observed when UL traffic was run
in concurrency with device deregistration from different functions,
pasting one sample for reference.
[496733.627565][T13385] Call trace:
[496733.627570][T13385] bpf_prog_ce7c9180c3b128ea_cgroupskb_egres+0x24c/0x7f0
[496733.627581][T13385] __cgroup_bpf_run_filter_skb+0x128/0x498
[496733.627595][T13385] ip_finish_output+0xa4/0xf4
[496733.627605][T13385] ip_output+0x100/0x1a0
[496733.627613][T13385] ip_send_skb+0x68/0x100
[496733.627618][T13385] udp_send_skb+0x1c4/0x384
[496733.627625][T13385] udp_sendmsg+0x7b0/0x898
[496733.627631][T13385] inet_sendmsg+0x5c/0x7c
[496733.627639][T13385] __sys_sendto+0x174/0x1e4
[496733.627647][T13385] __arm64_sys_sendto+0x28/0x3c
[496733.627653][T13385] invoke_syscall+0x58/0x11c
[496733.627662][T13385] el0_svc_common+0x88/0xf4
[496733.627669][T13385] do_el0_svc+0x2c/0xb0
[496733.627676][T13385] el0_svc+0x2c/0xa4
[496733.627683][T13385] el0t_64_sync_handler+0x68/0xb4
[496733.627689][T13385] el0t_64_sync+0x1a4/0x1a8
Changes in v3:
- Replaced WARN_ON() with WARN_ON_ONCE(), as suggested by Willem de Bruijn.
- Dropped legacy lines mistakenly pulled in from an outdated branch.
Changes in v2:
- Addressed review comments from Eric Dumazet
- Used READ_ONCE() to prevent potential load/store tearing
- Added skb_dst_dev_rcu() and used along with rcu_read_lock() in ip_output
Signed-off-by: Sharath Chandra Vurukala <quic_sharathv@quicinc.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20250730105118.GA26100@hu-sharathv-hyd.qualcomm.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Stable-dep-of: 833d4313bc ("mptcp: reset blackhole on success with non-loopback ifaces")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit a74fc62eec ]
Use the new helpers as a first step to deal with
potential dst->dev races.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20250630121934.3399505-8-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Stable-dep-of: 833d4313bc ("mptcp: reset blackhole on success with non-loopback ifaces")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 88fe14253e ]
dst->dev is read locklessly in many contexts,
and written in dst_dev_put().
Fixing all the races is going to need many changes.
We probably will have to add full RCU protection.
Add three helpers to ease this painful process.
static inline struct net_device *dst_dev(const struct dst_entry *dst)
{
return READ_ONCE(dst->dev);
}
static inline struct net_device *skb_dst_dev(const struct sk_buff *skb)
{
return dst_dev(skb_dst(skb));
}
static inline struct net *skb_dst_dev_net(const struct sk_buff *skb)
{
return dev_net(skb_dst_dev(skb));
}
static inline struct net *skb_dst_dev_net_rcu(const struct sk_buff *skb)
{
return dev_net_rcu(skb_dst_dev(skb));
}
Fixes: 4a6ce2b6f2 ("net: introduce a new function dst_dev_put()")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20250630121934.3399505-7-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Stable-dep-of: 833d4313bc ("mptcp: reset blackhole on success with non-loopback ifaces")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 15492700ac ]
tcp_in_quickack_mode() is called from input path for small packets.
It calls __sk_dst_get() which reads sk->sk_dst_cache which has been
put in sock_read_tx group (for good reasons).
Then dst_metric(dst, RTAX_QUICKACK) also needs extra cache line misses.
Cache RTAX_QUICKACK in icsk->icsk_ack.dst_quick_ack to no longer pull
these cache lines for the cases a delayed ACK is scheduled.
After this patch TCP receive path does not longer access sock_read_tx
group.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Jason Xing <kerneljasonxing@gmail.com>
Reviewed-by: Neal Cardwell <ncardwell@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://patch.msgid.link/20250312083907.1931644-1-edumazet@google.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Stable-dep-of: 833d4313bc ("mptcp: reset blackhole on success with non-loopback ifaces")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit e7b9ecce56 ]
TCP uses of dev_net() are under RCU protection, change them
to dev_net_rcu() to get LOCKDEP support.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://patch.msgid.link/20250301201424.2046477-4-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Stable-dep-of: 833d4313bc ("mptcp: reset blackhole on success with non-loopback ifaces")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit a7075f501b ]
There was backward compatibility in the terms of mailbox API. Various
drivers from various OSes supporting 10G adapters from Intel portfolio
could easily negotiate mailbox API.
This convention has been broken since introducing API 1.4.
Commit 0062e7cc95 ("ixgbevf: add VF IPsec offload code") added support
for IPSec which is specific only for the kernel ixgbe driver. None of the
rest of the Intel 10G PF/VF drivers supports it. And actually lack of
support was not included in the IPSec implementation - there were no such
code paths. No possibility to negotiate support for the feature was
introduced along with introduction of the feature itself.
Commit 339f289641 ("ixgbevf: Add support for new mailbox communication
between PF and VF") increasing API version to 1.5 did the same - it
introduced code supported specifically by the PF ESX driver. It altered API
version for the VF driver in the same time not touching the version
defined for the PF ixgbe driver. It led to additional discrepancies,
as the code provided within API 1.6 cannot be supported for Linux ixgbe
driver as it causes crashes.
The issue was noticed some time ago and mitigated by Jake within the commit
d0725312ad ("ixgbevf: stop attempting IPSEC offload on Mailbox API 1.5").
As a result we have regression for IPsec support and after increasing API
to version 1.6 ixgbevf driver stopped to support ESX MBX.
To fix this mess add new mailbox op asking PF driver about supported
features. Basing on a response determine whether to set support for IPSec
and ESX-specific enhanced mailbox.
New mailbox op, for compatibility purposes, must be added within new API
revision, as API version of OOT PF & VF drivers is already increased to
1.6 and doesn't incorporate features negotiate op.
Features negotiation mechanism gives possibility to be extended with new
features when needed in the future.
Reported-by: Jacob Keller <jacob.e.keller@intel.com>
Closes: https://lore.kernel.org/intel-wired-lan/20241101-jk-ixgbevf-mailbox-v1-5-fixes-v1-0-f556dc9a66ed@intel.com/
Fixes: 0062e7cc95 ("ixgbevf: add VF IPsec offload code")
Fixes: 339f289641 ("ixgbevf: Add support for new mailbox communication between PF and VF")
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Cc: stable@vger.kernel.org
Signed-off-by: Jedrzej Jagielski <jedrzej.jagielski@intel.com>
Tested-by: Rafal Romanowski <rafal.romanowski@intel.com>
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/20251009-jk-iwl-net-2025-10-01-v3-4-ef32a425b92a@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 53f0eb62b4 ]
E610 adapters no longer use the VFLINKS register to read PF's link
speed and linkup state. As a result VF driver cannot get actual link
state and it incorrectly reports 10G which is the default option.
It leads to a situation where even 1G adapters print 10G as actual
link speed. The same happens when PF driver set speed different than 10G.
Add new mailbox operation to let the VF driver request a PF driver
to provide actual link data. Update the mailbox api to v1.6.
Incorporate both ways of getting link status within the legacy
ixgbe_check_mac_link_vf() function.
Fixes: 4c44b450c6 ("ixgbevf: Add support for Intel(R) E610 device")
Co-developed-by: Andrzej Wilczynski <andrzejx.wilczynski@intel.com>
Signed-off-by: Andrzej Wilczynski <andrzejx.wilczynski@intel.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Cc: stable@vger.kernel.org
Signed-off-by: Jedrzej Jagielski <jedrzej.jagielski@intel.com>
Tested-by: Rafal Romanowski <rafal.romanowski@intel.com>
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/20251009-jk-iwl-net-2025-10-01-v3-2-ef32a425b92a@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Stable-dep-of: a7075f501b ("ixgbevf: fix mailbox API compatibility by negotiating supported features")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 4c44b450c6 ]
Add support for Intel(R) E610 Series of network devices. The E610
is based on X550 but adds firmware managed link, enhanced security
capabilities and support for updated server manageability
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: Piotr Kwapulinski <piotr.kwapulinski@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Rafal Romanowski <rafal.romanowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Stable-dep-of: a7075f501b ("ixgbevf: fix mailbox API compatibility by negotiating supported features")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
