- Add a missing refcount decrement in ata_scsi_dev_rescan() when
the device or its queue is not running. In the case where the
device is running, the recount is already decremented properly
(Yihang Li)
- Generate the proper sense code for a Security locked device.
There was a regression caused by a recent change of how sense
data is generated for commands that did not provide any sense
data. This broke system suspend for Security locked devices.
Generate the sense data that the SCSI disk driver expects for
a Security locked device so that system supend works again
(me)
- Set capacity to zero for a Security locked device.
All I/O commands will be aborted by a Security locked device.
Thus, the block layer disk partition scanning will result in
a bunch of, for the user, confusing I/O errors in dmesg during
boot. Since a Security locked device is unusable anyway, set
the capacity to zero, to avoid the disk partition scanning
during boot. We still create the block device in /dev such
that the user may unlock the device using e.g. hdparm (me)
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRN+ES/c4tHlMch3DzJZDGjmcZNcgUCaSB/+AAKCRDJZDGjmcZN
cswtAP4l1Ui8d6PwHnxVvOlv1cWO/K+7XboiGZNFphf7QDZhPQD+J41BG/YNyNcB
Ma716tdF1UVayUB2OItsX0gSmmz9KgI=
=0b5E
-----END PGP SIGNATURE-----
Merge tag 'ata-6.18-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/libata/linux
Pull ata fixes from Niklas Cassel:
- Add a missing refcount decrement in ata_scsi_dev_rescan() when
the device or its queue is not running.
In the case where the device is running, the recount is already
decremented properly (Yihang Li)
- Generate the proper sense code for a Security locked device.
There was a regression caused by a recent change of how sense
data is generated for commands that did not provide any sense
data. This broke system suspend for Security locked devices.
Generate the sense data that the SCSI disk driver expects for a
Security locked device so that system suspend works again (me)
- Set capacity to zero for a Security locked device.
All I/O commands will be aborted by a Security locked device.
Thus, the block layer disk partition scanning will result in
a bunch of, for the user, confusing I/O errors in dmesg during
boot.
Since a Security locked device is unusable anyway, set the capacity
to zero, to avoid the disk partition scanning during boot. We still
create the block device in /dev such that the user may unlock the
device using e.g. hdparm (me)
* tag 'ata-6.18-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/libata/linux:
ata: libata-core: Set capacity to zero for a security locked drive
ata: libata-scsi: Fix system suspend for a security locked drive
ata: libata-scsi: Add missing scsi_device_put() in ata_scsi_dev_rescan()
For a port used with lane reversal enabled the first two TX lanes will
be enabled in PHY lane#1 instead of PHY lane#0. At the moment the HW
readout will read out the power-down state for these two TX lanes from
PHY lane#0 incorrectly. The display HW lane reversal feature (vs. the
similar TCSS lane swap) is only used for TypeC legacy mode and for
non-TypeC PHYs. Since in both of these cases the display owns both PHY
lanes, both of these PHY lanes' state can be read out. Do that to fix
cases when lane reversal is used with 1 or 2 active TX lanes.
While at it add an assert to the PLL enable function about the above
assumption on when lane reversal can be used.
Cc: Mika Kahola <mika.kahola@intel.com>
Cc: Suraj Kandpal <suraj.kandpal@intel.com>
Fixes: 230d4c7481 ("drm/i915/cx0: Track the Cx0 PHY enabled lane count in the PLL state")
Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patch.msgid.link/20251120172358.1282765-5-imre.deak@intel.com
If the number of used lanes is 1 or 2 then the power-down state of both
TX lanes in PHY lane 0 should be read out. If 1 lane is used only 1 TX
lane will be checked, make sure both TXs are checked in this case.
Cc: Mika Kahola <mika.kahola@intel.com>
Cc: Suraj Kandpal <suraj.kandpal@intel.com>
Fixes: 230d4c7481 ("drm/i915/cx0: Track the Cx0 PHY enabled lane count in the PLL state")
Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patch.msgid.link/20251120172358.1282765-4-imre.deak@intel.com
Use intel_port_to_tc() in mtl_port_to_pll_id(), instead of open coding
the same.
v2: s/USe/Use in commit message.
Cc: Suraj Kandpal <suraj.kandpal@intel.com>
Cc: Mika Kahola <mika.kahola@intel.com>
Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patch.msgid.link/20251120172358.1282765-3-imre.deak@intel.com
intel_port_to_tc() returns the PORT_TC1..6 -> TC_PORT_1..6 mapping only
for DDI ports that are connected to a TypeC PHY. In some cases this
mapping is also required for TypeC DDI ports which are not connected to
a TypeC PHY. Such DDI ports are the PORT_TC1..4 ports on RKL/ADLS/BMG.
Add a separate intel_tc_phy_to_tc() helper to return the mapping for
ports connected to a TypeC PHY, and make all the current users - which
expect this semantic - call this helper. A follow-up change will need to
get the same mapping for TypeC DDI ports not connected to a TypeC PHY,
leave intel_port_to_tc() exported for that.
Cc: Suraj Kandpal <suraj.kandpal@intel.com>
Cc: Mika Kahola <mika.kahola@intel.com>
Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patch.msgid.link/20251120172358.1282765-2-imre.deak@intel.com
The intel_port_to_tc() call in mtl_port_to_pll_id() assumed that all
TypeC DDI ports are connected to a TypeC PHY. This is not true on BMG
where all the ports - including the PORT_TC1..4 TypeC DDI ports - are
connected to a non-TypeC PHY. For these ports intel_port_to_tc()
returns TC_PORT_NONE, which results in an incorrect port -> PLL ID
mapping. Fix this up by using the expected PORT_TC1..4 port ->
TC_PORT_1..4 tc_port mapping on BMG as well.
Fixes: ca1eda5cd4 ("drm/i915/cx0: Add MTL+ .get_dplls hook")
Cc: Suraj Kandpal <suraj.kandpal@intel.com>
Reviewed-by: Mika Kahola <mika.kahola@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patch.msgid.link/20251120172358.1282765-1-imre.deak@intel.com
- Fix register naming in the Mediatek mt8189 driver.
- Select REGMAP_MMIO for the Realtek RTD driver.
- Fix the number of items in groups in the Toshiba
Visconti driver.
- Fix a memory leak in the Cirrus CS42L43 driver.
- Fix a deadlock (!) in Qualcomm pinmux configuration.
- Fix use of uninitialized memory and list initialization
in the S32CC pin controller.
-----BEGIN PGP SIGNATURE-----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=dfY2
-----END PGP SIGNATURE-----
Merge tag 'pinctrl-v6.18-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl
Pull pin control fixes from Linus Walleij:
- Fix register naming in the Mediatek mt8189 driver
- Select REGMAP_MMIO for the Realtek RTD driver
- Fix the number of items in groups in the Toshiba Visconti driver
- Fix a memory leak in the Cirrus CS42L43 driver
- Fix a deadlock (!) in Qualcomm pinmux configuration
- Fix use of uninitialized memory and list initialization in the S32CC
pin controller
* tag 'pinctrl-v6.18-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl:
dt-bindings: pinctrl: xlnx,versal-pinctrl: Add missing unevaluatedProperties on '^conf' nodes
pinctrl: s32cc: initialize gpio_pin_config::list after kmalloc()
pinctrl: s32cc: fix uninitialized memory in s32_pinctrl_desc
pinctrl: qcom: msm: Fix deadlock in pinmux configuration
pinctrl: cirrus: Fix fwnode leak in cs42l43_pin_probe()
dt-bindings: pinctrl: toshiba,visconti: Fix number of items in groups
pinctrl: realtek: Select REGMAP_MMIO for RTD driver
pinctrl: mediatek: mt8189: align register base names to dt-bindings ones
pinctrl: mediatek: mt8196: align register base names to dt-bindings ones
Hoyeon Lee says:
====================
selftests/bpf: networking test cleanups
This series finishes the sockaddr_storage migration in the networking
selftests by removing the remaining open-coded IPv4/IPv6 wrappers
(addr_port/tuple in cls_redirect, sa46 in select_reuseport). The tests
now use sockaddr_storage directly. No other custom socket-address
wrappers remain after this series, so the churn stops here and behavior
is unchanged.
====================
Link: https://patch.msgid.link/20251121081332.2309838-1-hoyeon.lee@suse.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
The select_reuseport selftest uses a custom sa46 union to represent
IPv4 and IPv6 addresses. This custom wrapper requires extra manual
handling for address family and field extraction.
Replace sa46 with sockaddr_storage and update the helper functions to
operate on native socket structures. This simplifies the code and
removes unnecessary custom address-handling logic. No functional
changes intended.
Reviewed-by: Amery Hung <ameryhung@gmail.com>
Signed-off-by: Hoyeon Lee <hoyeon.lee@suse.com>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://patch.msgid.link/20251121081332.2309838-3-hoyeon.lee@suse.com
The cls_redirect test uses a custom addr_port/tuple wrapper to represent
IPv4/IPv6 addresses and ports. This custom wrapper requires extra
conversion logic and specific helpers such as fill_addr_port(), which
are no longer necessary when using standard socket address structures.
This commit replaces addr_port/tuple with the standard sockaddr_storage
so test handles address families and ports using native socket types.
It removes the custom helper, eliminates redundant casts, and simplifies
the setup helpers without functional changes. set_up_conn() and
build_input() now take src/dst sockaddr_storage directly.
Reviewed-by: Amery Hung <ameryhung@gmail.com>
Signed-off-by: Hoyeon Lee <hoyeon.lee@suse.com>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://patch.msgid.link/20251121081332.2309838-2-hoyeon.lee@suse.com
- fix a use-after-free bug in GPIO character device code
- update MAINTAINERS
-----BEGIN PGP SIGNATURE-----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=nTA4
-----END PGP SIGNATURE-----
Merge tag 'gpio-fixes-for-v6.18-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux
Pull gpio fixes from Bartosz Golaszewski:
- fix a use-after-free bug in GPIO character device code
- update MAINTAINERS
* tag 'gpio-fixes-for-v6.18-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux:
MAINTAINERS: update my email address
gpio: cdev: make sure the cdev fd is still active before emitting events
Commit 23db6eed72bd ("MAINTAINERS: Add Jonathan Cameron to drivers/cache
and add lib/cache_maint.c + header") intends to add a file entry pointing
to the cache_coherency.h file, but messes up to name the right path.
Update the entry to the intended file.
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@redhat.com>
Acked-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Hydra Home Agent is a device used to maintain cache coherency. Add support
for explicit cache maintenance operations using it. A system has multiple
of these agents. Whilst only one agent is responsible for a given cache
line, interleave means that for a range operation, responsibility for the
cache lines making up the range will typically be spread across multiple
instances.
Put this driver on a new Kconfig menu under drivers/cache. The short
description as memory hotplug like operations is intended to cover
the somewhat complex set of cases where this unit applies and differentiate
it clearly from typical non coherent DMA flows.
Co-developed-by: Yicong Yang <yangyicong@hisilicon.com>
Signed-off-by: Yicong Yang <yangyicong@hisilicon.com>
Signed-off-by: Yushan Wang <wangyushan12@huawei.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
The next patch will add a new type of cache maintenance driver responsible
for flushing deeper than is necessary for non coherent DMA (current
use case of drivers/cache drivers), as needed when performing operations
such as memory hotplug and security unlocking of persistent memory. The two
types of operation are similar enough to share a drivers/cache directory
and MAINTAINERS but are otherwise currently unrelated.
To avoid confusion have two separate menus. Each has dependencies that are
implemented by making them boolean symbols, here CACHEMAINT_FOR_DMA
which is dependent on RISCV as all driver are currently for platforms of
that architecture. Set new symbol default to y to avoid breaking existing
configs. This has no affect on actual code built, just visibility of the
menu.
Suggested-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Seems unfair to inflict the cache-coherency drivers on Conor with out also
stepping up as a second maintainer for drivers/cache.
Include the library support for cache-coherency maintenance drivers to the
existing entry.
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
The generic CPU cache maintenance framework provides a way to register
drivers for devices implementing the underlying support for
cpu_cache_has_invalidate_memregion(). Enable it for arm64 by selecting
GENERIC_CPU_CACHE_MAINTENANCE which provides the implementation for,
and in turn selects, ARCH_HAS_CPU_CACHE_INVALIDATE_MEMREGION.
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
ARCH_HAS_CPU_CACHE_INVALIDATE_MEMREGION provides the mechanism for
invalidating certain memory regions in a cache-incoherent manner. Currently
this is used by NVDIMM and CXL memory drivers in cases where it is
necessary to flush all data from caches by physical address range.
The operations in question are effectively memory hotplug, where stale
data might otherwise remain in the caches.
This is separate from the invalidates done to enable use of non-coherent
DMA masters, primarily in terms of when it is needed (not related to DMA
mappings) and how deep the flush must push data. The flushes done for
non-coherent DMA only need to reach the Point of Coherence of a single host
(which is often nearer CPUs and DMA masters than the physical storage).
This operation must push the data out of non architectural caches
(memory-side caches, write buffers etc) and typically all the way to the
memory device.
In some architectures these operations are supported by system components
that may become available only later in boot as they are either present
on a discoverable bus, or via a firmware description of an MMIO interface
(e.g. ACPI DSDT). Provide a framework to handle this case.
Architectures can opt in for this support via
CONFIG_GENERIC_CPU_CACHE_MAINTENANCE
Add a registration framework. Each driver provides an ops structure and
the first op is Write Back and Invalidate by PA Range. The driver may
over invalidate.
For systems that can perform this operation asynchronously an optional
completion check operation is also provided. If present that must be called
to ensure that the action has finished. This provides a considerable
performance advantage if multiple agents are involved in the maintenance
operation.
When multiple agents are present in the system each should register with
this framework and the core code will issue the invalidate to all of them
before checking for completion on each. This is done to avoid need for
filtering in the core code which can become complex when interleave,
potentially across different cache coherency hardware is going on, so it
is easier to tell everyone and let those who don't care do nothing.
Signed-off-by: Yicong Yang <yangyicong@hisilicon.com>
Co-developed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Fully initialize *ctx, including the buf field which sha256_init()
doesn't initialize, to avoid a KMSAN warning when comparing *ctx to
orig_ctx. This KMSAN warning slipped in while KMSAN was not working
reliably due to a stackdepot bug, which has now been fixed.
Fixes: 6733968be7 ("lib/crypto: tests: Add tests and benchmark for sha256_finup_2x()")
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20251121033431.34406-1-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
The igen6_edac driver calls device_initialize() for all memory
controllers in igen6_register_mci(), but misses corresponding
put_device() calls in error paths and during normal shutdown in
igen6_unregister_mcis().
Adding the missing put_device() calls improves code readability and
ensures proper reference counting for the device structure.
Found by code review.
Signed-off-by: Ma Ke <make24@iscas.ac.cn>
Reviewed-by: Qiuxu Zhuo <qiuxu.zhuo@intel.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
Link: https://patch.msgid.link/20251105090244.23327-1-make24@iscas.ac.cn
Setup the following debugfs testing node to enable fake memory error
address decoding tests for the imh_edac driver.
/sys/kernel/debug/edac/imh_test/addr
Tested-by: Yi Lai <yi1.lai@intel.com>
Signed-off-by: Qiuxu Zhuo <qiuxu.zhuo@intel.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
Link: https://patch.msgid.link/20251119134132.2389472-8-qiuxu.zhuo@intel.com
Detect 2-level memory configurations and notify the 'skx_common' library
to enable ADXL 2-level memory error decoding.
Tested-by: Yi Lai <yi1.lai@intel.com>
Signed-off-by: Qiuxu Zhuo <qiuxu.zhuo@intel.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
Link: https://patch.msgid.link/20251119134132.2389472-7-qiuxu.zhuo@intel.com
The allowed maximum number of row bits for DRAM chips in the Diamond
Rapids server processor is up to 19. Extend the current maximum row
bits from 18 to 19.
Tested-by: Yi Lai <yi1.lai@intel.com>
Signed-off-by: Qiuxu Zhuo <qiuxu.zhuo@intel.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
Link: https://patch.msgid.link/20251119134132.2389472-6-qiuxu.zhuo@intel.com
Intel Diamond Rapids CPUs include Integrated Memory and I/O Hubs (IMH).
The memory controllers within the IMHs provide memory stacks to the
processor. Create a new driver for this IMH-based memory controllers
rather than applying additional patches to the existing i10nm_edac.c
for the following reasons:
1) The memory controllers are not presented as PCI devices; instead,
the detection and all their registers have been transitioned to
MMIO-based memory spaces.
2) Validation processes are costly. Modifications to i10nm_edac would
require extensive validation checks against multiple platforms,
including Ice Lake, Sapphire Rapids, Emerald Rapids, Granite Rapids,
Sierra Forest, and Grand Ridge.
3) Future Intel CPUs will likely only need patches on top of this new
EDAC driver. Validation can be limited to Diamond Rapids servers
and future Intel CPU generations.
[Tony: Fix kerneldoc for struct local_reg]
[randconfig: Added dependencies on NFIT and DMI]
Tested-by: Yi Lai <yi1.lai@intel.com>
Signed-off-by: Qiuxu Zhuo <qiuxu.zhuo@intel.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
Link: https://patch.msgid.link/20251119134132.2389472-5-qiuxu.zhuo@intel.com
Call paths leading to __virt_pg_map() are currently:
(a) virt_pg_map() -> virt_arch_pg_map() -> __virt_pg_map()
(b) virt_map_level() -> __virt_pg_map()
For (a), calls to virt_pg_map() from kvm_util.c make sure they update
vm->vpages_mapped, but other callers do not. Move the sparsebit_set()
call into virt_pg_map() to make sure all callers are captured.
For (b), call sparsebit_set_num() from virt_map_level().
It's tempting to have a single the call inside __virt_pg_map(), however:
- The call path in (a) is not x86-specific, while (b) is. Moving the
call into __virt_pg_map() would require doing something similar for
other archs implementing virt_pg_map().
- Future changes will reusue __virt_pg_map() for nested PTEs, which should
not update vm->vpages_mapped, i.e. a triple underscore version that does
not update vm->vpages_mapped would need to be provided.
Signed-off-by: Yosry Ahmed <yosry.ahmed@linux.dev>
Link: https://patch.msgid.link/20251021074736.1324328-12-yosry.ahmed@linux.dev
Signed-off-by: Sean Christopherson <seanjc@google.com>
Replace __virt_pg_map() calls in tests by high-level equivalent
functions, removing some loops in the process.
No functional change intended.
Signed-off-by: Yosry Ahmed <yosry.ahmed@linux.dev>
Link: https://patch.msgid.link/20251021074736.1324328-11-yosry.ahmed@linux.dev
Signed-off-by: Sean Christopherson <seanjc@google.com>
Mauro says:
That's the final series to complete the migration of documentation
build: it converts get_feat from Perl to Python.
V2 is technically identical to v1: the only difference is that it
now uses tools/lib/python/feat to store the library logic.
With that, no Sphinx in-kernel extensions use fork anymore to call
ancillary scripts: everything is now importing Python methods
directly from the libraries.
There's nothing special on this conversion: it is a direct translation,
almost bug-compatible with the original version (*).
(*) I did solve two or three caveats on patch 1.
Most of the complexity of the script relies at the logic to produce
ReST tables. I do have here on my internal scripts a (somewhat) generic
formatter for ReST tables in Python. I was tempted to convert the logic
to use it, but, as this could cause regressions, I opted to not do it
right now, mainly because the matrix table logic is complex. Also,
I'm tempted to modify a little bit the output there, but extra tests
are required to see if PDF output would work with complex tables (I
remember I had a problem with that in the past). So, I'm postponing
such extra cleanup.
Now that this was rewritten in Python, we can remove the old
tool.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Message-ID: <1f53e0fa48616af189ce98b45a65cc0c245e7aaf.1763492868.git.mchehab+huawei@kernel.org>
Now that get_feat is in Python, we don't need to use subprocess
to fork an executable file: we can use the feature classes
directly.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Message-ID: <c59d2542d7cc914fd5f8c84df966e63adc924cdc.1763492868.git.mchehab+huawei@kernel.org>
As we want to call Python code directly at the Sphinx extension,
convert get_feat.pl to Python.
The code was made to be (almost) bug-compatible with the Perl
version, with two exceptions:
1. Currently, Perl script outputs a wrong table if arch is set
to a non-existing value;
2. the ReST table output when --feat is used without --arch
has an invalid format, as the number of characters for the
table delimiters are wrong.
Those two bugs were fixed while testing the conversion.
Additionally, another caveat was solved:
the output when --feat is used without arch and the feature
doesn't exist doesn't contain an empty table anymore.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Message-ID: <03c26cee1ec567804735a33047e625ef5ab7bfa8.1763492868.git.mchehab+huawei@kernel.org>
IRQF_SHARED is the only flag handled in __serial8250_isa_init_ports()
and serial8250_probe_platform(). There is no need to precompute the
flags. Instead, initialize port->irqflags directly in the for loop.
Note the "if (bool)" is cheap and these are not hot paths anyway.
Signed-off-by: Jiri Slaby (SUSE) <jirislaby@kernel.org>
Link: https://patch.msgid.link/20251119092457.826789-7-jirislaby@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
8250_core is the only place where skip_txen_test is used. And platform
and core end up in 8250.ko, so there is no change in module name (param
prefix). Therefore, move skip_txen_test there and make it local.
Signed-off-by: Jiri Slaby (SUSE) <jirislaby@kernel.org>
Link: https://patch.msgid.link/20251119092457.826789-5-jirislaby@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In 3.7, 8250 was unintentionally renamed to 8250_core. This happened in
the commit 835d844d1a (8250_pnp: do pnp probe before legacy probe).
This made 8250.<xxxx> module options effectively defunct. Instead,
8250_core.<xxxx> worked.
In 3.9, the commit f2b8dfd9e4 (serial: 8250: Keep 8250.<xxxx> module
options functional after driver rename) made the original options work
again by introducing a hack.
Later in 3.9, the commit 9196d8acd7 (TTY: 8250, revert module name
change) changed the module name back to 8250 (from 8250_core). Since
then, the hack was there to support the transient 8250_core.<xxxx>
options. Those were present only in the 3.7..3.9 range.
These transient options were deprecated by 9326b047e4 (TTY: 8250,
deprecated 8250_core.* options) in v3.9 too.
Now, after those 12 years, it is time to get rid of this hack
completely.
Signed-off-by: Jiri Slaby (SUSE) <jirislaby@kernel.org>
Link: https://patch.msgid.link/20251119092457.826789-4-jirislaby@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Provided the uart driver is available globally, there is no need to
store a pointer to it in struct cdns_uart. Instead, use the global
cdns_uart_uart_driver in the code directly.
Signed-off-by: Jiri Slaby (SUSE) <jirislaby@kernel.org>
Acked-by: Michal Simek <michal.simek@amd.com>
Link: https://patch.msgid.link/20251119092457.826789-3-jirislaby@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Use guards in the serial_core code. This improves readability, makes
error handling easier, and marks locked portions of code explicit. All
that while being sure the lock is unlocked.
Signed-off-by: Jiri Slaby (SUSE) <jirislaby@kernel.org>
Link: https://patch.msgid.link/20251119100140.830761-11-jirislaby@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Neither uart_do_autoconfig(), nor uart_wait_modem_status() can return
-ENOIOCTLCMD. The ENOIOCTLCMD checks are there to check if 'cmd' matched
against TIOCSERCONFIG, and TIOCMIWAIT respectively. (With 0 or error in
'ret', it does not matter.)
Therefore, the code can simply return from the TIOCSERCONFIG and
TIOCMIWAIT spots immediately.
To be more explicit, use 'if' instead of switch-case for those single
values.
And return without jumping to the 'out' label -- it can be removed too.
Signed-off-by: Jiri Slaby (SUSE) <jirislaby@kernel.org>
Link: https://patch.msgid.link/20251119100140.830761-10-jirislaby@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Use guards in the vt/keyboard code. This improves readability, makes
error handling easier, and marks locked portions of code explicit. All
that while being sure the lock is unlocked.
Signed-off-by: Jiri Slaby (SUSE) <jirislaby@kernel.org>
Link: https://patch.msgid.link/20251119100140.830761-9-jirislaby@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Return immediately when something goes wrong in vt_do_kbkeycode_ioctl().
This makes the code flow more obvious.
Signed-off-by: Jiri Slaby (SUSE) <jirislaby@kernel.org>
Link: https://patch.msgid.link/20251119100140.830761-8-jirislaby@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The vt/keyboard code can use __free to ensure the temporary buffers are
freed. Perform the switch.
And even one non-temporary in kbd_connect(). There are fail paths, so
ensure the buffer is freed in them and not when returning 0 -- by
retain_and_null_ptr().
Signed-off-by: Jiri Slaby (SUSE) <jirislaby@kernel.org>
Link: https://patch.msgid.link/20251119100140.830761-7-jirislaby@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Use guards in the moxa code. This improves readability, makes error
handling easier, and marks locked portions of code explicit. All that
while being sure the lock is unlocked.
Signed-off-by: Jiri Slaby (SUSE) <jirislaby@kernel.org>
Link: https://patch.msgid.link/20251119100140.830761-6-jirislaby@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Use guards in the n_hdlc code. This improves readability, makes error
handling easier, and marks locked portions of code explicit. All that
while being sure the lock is unlocked.
Signed-off-by: Jiri Slaby (SUSE) <jirislaby@kernel.org>
Link: https://patch.msgid.link/20251119100140.830761-5-jirislaby@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The cases in the switch() of n_hdlc_tty_ioctl() can return immediately
-- no need to store into error and return later.
Signed-off-by: Jiri Slaby (SUSE) <jirislaby@kernel.org>
Link: https://patch.msgid.link/20251119100140.830761-4-jirislaby@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Use guards in the n_tty code. This improves readability, makes error
handling easier, and marks locked portions of code explicit. All that
while being sure the lock is unlocked.
Signed-off-by: Jiri Slaby (SUSE) <jirislaby@kernel.org>
Link: https://patch.msgid.link/20251119100140.830761-3-jirislaby@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Use guards in the pty code. This improves readability, makes error
handling easier, and marks locked portions of code explicit. All that
while being sure the lock is unlocked.
pty_set_pktmode() is handled specially -- the conditions are inverted
and return called if conditions unmet. This avoid double nested 'if's.
The variable is renamed to want_pktmode so it is not confused with the
current state of pktmode.
Signed-off-by: Jiri Slaby (SUSE) <jirislaby@kernel.org>
Link: https://patch.msgid.link/20251119100140.830761-2-jirislaby@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch updates the Linux documentation for cscope, fixing two issues:
1. Corrects the typo in the command line:
c"scope -d -p10 -> cscope -d -p10
2. Fixes the related documentation comment for clarity and correctness:
cscope by default cscope.out database.
->
cscope by default uses the cscope.out database.
Signed-off-by: Jiakai Xu <jiakaiPeanut@gmail.com>
Reviewed-by: Randy Dunlap <rdunlap@infradead.org>
Tested-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Message-ID: <20251119065727.3500015-1-jiakaiPeanut@gmail.com>
Apparently as of version 2.42, glibc headers define AT_RENAME_NOREPLACE
and some of the other flags for renameat2() and friends in <stdio.h>.
Which would all be fine, except for inexplicable reasons glibc decided
to define them _differently_ from the kernel definitions, which then
makes some of our sample code that includes both kernel headers and user
space headers unhappy, because the compiler will (correctly) complain
about redefining things.
Now, mixing kernel headers and user space headers is always a somewhat
iffy proposition due to namespacing issues, but it's kind of inevitable
in our sample and selftest code. And this is just glibc being stupid.
Those defines come from the kernel, glibc is exposing the kernel
interfaces, and glibc shouldn't make up some random new expressions for
these values.
It's not like glibc headers changed the actual result values, but they
arbitrarily just decided to use a different expression to describe those
values. The kernel just does
#define AT_RENAME_NOREPLACE 0x0001
while glibc does
# define RENAME_NOREPLACE (1 << 0)
# define AT_RENAME_NOREPLACE RENAME_NOREPLACE
instead. Same value in the end, but very different macro definition.
For absolutely no reason.
This has since been fixed in the glibc development tree, so eventually
we'll end up with the canonical expressions and no clashes. But in the
meantime the broken headers are in the glibc-2.42 release and have made
it out into distributions.
Do a minimal work-around to make the samples build cleanly by just
undefining the affected macros in between the user space header include
and the kernel header includes.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Better split CONFIG_DRM_XE_DEBUG and CONFIG_DRM_XE_DEBUG_GUC optional
parts from the main code, creating smaller ct_dead_* and fast_req_*
interfaces.
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Link: https://patch.msgid.link/20251119152157.1675188-2-lucas.demarchi@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>