ksft_exit_skip() increments ksft_xskip before printing the KTAP
result. As a result, ksft_test_num() already includes the skipped
test.
Adding 1 to ksft_test_num() increments the printed test number
again, producing an incorrect test number and wrong KTAP output.
Drop the extra increment and print ksft_test_num() directly.
Link: https://lore.kernel.org/r/20260427112447.147985-1-sarthak.sharma@arm.com
Fixes: b85d387c9b ("kselftest: fix TAP output for skipped tests")
Signed-off-by: Sarthak Sharma <sarthak.sharma@arm.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Various names for Qualcomm as a company are used in user-visible config
options: QCOM, Qualcomm and Qualcomm Technologies. Switch to unified
"Qualcomm" so it will be easier for users to identify the options when
for example running menuconfig.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Link: https://patch.msgid.link/20260427070052.18097-2-krzysztof.kozlowski@oss.qualcomm.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
None of the remaining boards put useful data into the platform_data
structures, so effectively this only works with DT based probing.
Remove all code that references this data, to stop using the legacy
gpiolib interfaces. The pxa27x version already supports gpio
descriptors, while the pxa25x version now does it the same way.
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://patch.msgid.link/20260427143300.2887692-1-arnd@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Various names for Qualcomm as a company are used in user-visible config
options: QCOM, Qualcomm and Qualcomm Technologies. Switch to unified
"Qualcomm" so it will be easier for users to identify the options when
for example running menuconfig.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Link: https://patch.msgid.link/20260427070044.17974-2-krzysztof.kozlowski@oss.qualcomm.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
A flexible array member can be used to combine allocations and simplify
handling slightly.
Add __counted_by for extra runtime analysis.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://patch.msgid.link/20260425014201.439251-1-rosenp@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When there's nothing going through the retimer, there's no reason to
keep it online. Put it in reset when possible to save power.
Also, remove the register cache-compare optimization as it makes little
sense now that the chip resets during almost all transitions and
tracking the validity of that cache becomes a headache.
Suggested-by: Jack Pham <jack.pham@oss.qualcomm.com>
Signed-off-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Tested-by: Anthony Ruhier <aruhier@mailbox.org>
Link: https://patch.msgid.link/20260420-topic-ps883x_unused_reset-v1-1-7aabf7004d2a@oss.qualcomm.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
To avoid polluting the namespace rename __no_stack_protector to
__nolibc_no_stack_protector so its now within the nolibc umbrella.
Suggested-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Daniel Palmer <daniel@thingy.jp>
Link: https://patch.msgid.link/20260425111315.3191461-2-daniel@thingy.jp
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Clang may convert the loop to find _auxv into a call to wcslen() which
is missing on nolibc. -fsanitize needs to be disabled for this to
happen.
Use the same pattern as in the nolibc strlen() implementation to avoid
the function call generation.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Acked-by: Willy Tarreau <w@1wt.eu>
Link: https://patch.msgid.link/20260418-nolibc-wcslen-v1-1-671271b8ea63@weissschuh.net
The system efficiency factor is used for QoS calculation. Change it to 2
to account for the efficiency overhead.
Signed-off-by: Nishad Saraf <nishads@amd.com>
Reviewed-by: Mario Limonciello (AMD) <superm1@kernel.org>
Signed-off-by: Lizhi Hou <lizhi.hou@amd.com>
Link: https://patch.msgid.link/20260424040824.2253607-3-lizhi.hou@amd.com
The QoS request provided when creating a hardware context is currently
ignored when operating in temporal-only mode. Change this to use resource
allocation through xrs_allocate_resource(), which sets the default DPM
level according to the QoS request.
When multiple hardware contexts are active, track their required DPM
levels and set the default DPM level to the highest among them.
Reviewed-by: Mario Limonciello (AMD) <superm1@kernel.org>
Signed-off-by: Lizhi Hou <lizhi.hou@amd.com>
Link: https://patch.msgid.link/20260424040824.2253607-1-lizhi.hou@amd.com
Just like in a previous problem in this driver, usblp_ctrl_msg() will
collapse the usb_control_msg() return value to 0/-errno, discarding the
actual number of bytes transferred.
Ideally that short command should be detected and error out, but many
printers are known to send "incorrect" responses back so we can't just
do that.
statusbuf is kmalloc(8) at probe time and never filled before the first
LPGETSTATUS ioctl.
usblp_read_status() requests 1 byte. If a malicious printer responds
with zero bytes, *statusbuf is one byte of stale kmalloc heap,
sign-extended into the local int status, which the LPGETSTATUS path then
copy_to_user()s directly to the ioctl caller.
Fix this all by just zapping out the memory buffer when allocated at
probe time. If a later call does a short read, the data will be
identical to what the device sent it the last time, so there is no
"leak" of information happening.
Cc: Pete Zaitcev <zaitcev@redhat.com>
Assisted-by: gkh_clanker_t1000
Cc: stable <stable@kernel.org>
Link: https://patch.msgid.link/2026042011-shredder-savage-48c6@gregkh
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
usblp_ctrl_msg() collapses the usb_control_msg() return value to
0/-errno, discarding the actual number of bytes transferred. A broken
printer can complete the GET_DEVICE_ID control transfer short and the
driver has no way to know.
usblp_cache_device_id_string() reads the 2-byte big-endian length prefix
from the response and trusts it (clamped only to the buffer bounds).
The buffer is kmalloc(1024) at probe time. A device that sends exactly
two bytes (e.g. 0x03 0xFF, claiming a 1023-byte ID) leaves
device_id_string[2..1022] holding stale kmalloc heap.
That stale data is then exposed:
- via the ieee1284_id sysfs attribute (sprintf("%s", buf+2), truncated
at the first NUL in the stale heap), and
- via the IOCNR_GET_DEVICE_ID ioctl, which copy_to_user()s the full
claimed length regardless of NULs, up to 1021 bytes of uninitialized
heap, with the leak size chosen by the device.
Fix this up by just zapping the buffer with zeros before each request
sent to the device.
Cc: Pete Zaitcev <zaitcev@redhat.com>
Assisted-by: gkh_clanker_t1000
Cc: stable <stable@kernel.org>
Link: https://patch.msgid.link/2026042002-unicorn-greedily-3c63@gregkh
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The Linux Version Code is currently written to the GUID register before
PHY initialization. Certain PHY implementations (such as Synopsys eUSB
PHY performing link_sw_reset) clear the GUID register to its default
value during initialization, causing the kernel version information to
be lost.
Move the GUID register programming to occur after PHY initialization
completes to ensure the Linux version information persists.
Fixes: fa0ea13e9f ("usb: dwc3: core: write LINUX_VERSION_CODE to our GUID register")
Cc: stable <stable@kernel.org>
Reported-by: Pritam Manohar Sutar <pritam.sutar@samsung.com>
Signed-off-by: Selvarasu Ganesan <selvarasu.g@samsung.com>
Acked-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Link: https://patch.msgid.link/20260417063314.2359-1-selvarasu.g@samsung.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The port in debug accessory mode can be either a source or sink. The
previous tcpm_port_is_debug() function only checked for source port.
Commit 8db73e6a42 ("usb: typec: tcpm: allow sink (ufp) to toggle into
accessory mode debug") changed the detection logic to support both roles,
but left some logic in _tcpm_cc_change() unchanged, This causes the state
machine to transition to an incorrect state when operating as a sink in
debug accessory mode. Log as below:
[ 978.637541] CC1: 0 -> 5, CC2: 0 -> 5 [state TOGGLING, polarity 0, connected]
[ 978.637567] state change TOGGLING -> SRC_ATTACH_WAIT [rev1 NONE_AMS]
[ 978.637596] pending state change SRC_ATTACH_WAIT -> DEBUG_ACC_ATTACHED @ 180 ms [rev1 NONE_AMS]
[ 978.647098] CC1: 5 -> 0, CC2: 5 -> 5 [state SRC_ATTACH_WAIT, polarity 0, connected]
[ 978.647115] state change SRC_ATTACH_WAIT -> SRC_ATTACH_WAIT [rev1 NONE_AMS]
It should go to SNK_ATTACH_WAIT instead of SRC_ATTACH_WAIT state.
To fix this, add tcpm_port_is_debug_source() and tcpm_port_is_debug_sink()
helper to explicitly identify the power mode in debug accessory mode.
Update the state transition logic in _tcpm_cc_change() to ensure the state
machine transitions comply with Type-C specification. Also update the logic
in run_state_machine() to keep consistency.
Fixes: 8db73e6a42 ("usb: typec: tcpm: allow sink (ufp) to toggle into accessory mode debug")
Cc: stable <stable@kernel.org>
Signed-off-by: Xu Yang <xu.yang_2@nxp.com>
Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Reviewed-by: Amit Sunil Dhamne <amitsd@google.com>
Link: https://patch.msgid.link/20260424074009.2979266-1-xu.yang_2@nxp.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Commit 01af542392 ("usb: ulpi: fix double free in
ulpi_register_interface() error path") removed kfree(ulpi) from
ulpi_register_interface() to fix a double-free when device_register()
fails.
But when ulpi_of_register() or ulpi_read_id() fail before
device_register() is called, the ulpi allocation is leaked.
Add kfree(ulpi) on both error paths to properly clean up the allocation.
Fixes: 01af542392 ("usb: ulpi: fix double free in ulpi_register_interface() error path")
Cc: stable <stable@kernel.org>
Signed-off-by: Felix Gu <ustc.gu@gmail.com>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://patch.msgid.link/20260407-ulpi-v1-1-f3fafe53f7b2@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Commit 65111084c6 ("USB: more omap_udc updates (dma and omap1710)")
added setting for DMA burst 4 mode. But I think this should be undone for
two reasons:
- It breaks DMA on 15xx boards - transfers just silently stall.
- On newer OMAP1 boards, like Nokia 770 (omap1710), there is no measurable
performance impact when testing TCP throughput with g_ether with large
15000 byte MTU size.
It's also worth noting that when the original change was made, the
OMAP_DMA_DATA_BURST_4 handling in arch/arm/plat-omap/dma.c was broken, and
actually resulted in the same as the OMAP_DMA_DATA_BURST_DIS i.e. burst
disabled. This was fixed not until a couple kernel releases later in an
unrelated commit 1a8bfa1eb9 ("[ARM] 3142/1: OMAP 2/5: Update files
common to omap1 and omap2").
So based on this it seems there was never really a very good reason to
enable this burst mode in omap_udc, so remove it now to allow 15xx DMA
to work again (it provides 2x throughput compared to PIO mode).
Fixes: 65111084c6 ("[PATCH] USB: more omap_udc updates (dma and omap1710)")
Cc: stable <stable@kernel.org>
Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Link: https://patch.msgid.link/ad06qHLclWHeSGnV@darkstar.musicnaut.iki.fi
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The H616 SoC has a video engine, and two SRAM regions needed by it.
Add the SRAM regions to the dtsi file. The video engine will be added
in a separate change.
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
[wens@kernel.org: Add VE SRAM region, commit message, and split into two]
Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://patch.msgid.link/20260324164357.1607247-8-wens@kernel.org
Signed-off-by: Chen-Yu Tsai <wens@kernel.org>
The Allwinner H616 has two switchable peripheral SRAM regions:
- The VE SRAM is a 2 MB dedicated SRAM for the Video Engine. CPU access
to this region is enabled by default. CPU access can be disabled,
after which reads will show the same stale value for all addresses,
while writes are ignored.
The mux value for this region is different from previous generations.
- The SRAM C region is an alias of the first 128 KB of VE SRAM, plus 64
KB of DE SRAM. The latter is otherwise unaccessible from the CPU. When
CPU access is disabled, the whole region reads as zero, while writes
are ignored.
The mux value for this region is the same as on the A64 and H6.
Add data for the VE SRAM. The register values were taken from the BSP
vendor kernel.
Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://patch.msgid.link/20260324164357.1607247-7-wens@kernel.org
Signed-off-by: Chen-Yu Tsai <wens@kernel.org>
On the H616, the video engine needs to claim two SRAM regions.
Support claiming multiple regions per device.
Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://patch.msgid.link/20260324164357.1607247-6-wens@kernel.org
Signed-off-by: Chen-Yu Tsai <wens@kernel.org>
On the H616, the SRAM C region is an alias mapping to part of the VE
SRAM (accessible in whole at a different address) and part of the DE
SRAM (otherwise unaccessible). As such both the VE and DE need to claim
this SRAM region to prevent access from the CPU.
The SRAM claim API is designed so that a "claim" routes the SRAM to the
peripheral device, disabling access from the CPU. So long as the written
register value is the same for all the claimants involved, allowing
multiple or repeated claims is trivial. This is indeed the case for all
supported SRAM regions. The only known SRAM region to have multiple
different settings is the SRAM C2 region; this can be claimed by the AE,
CE, or ACE (assumed to be AE + CE). This region is not supported, and
likely will never be needed nor supported, as there is no documentation
for the peripherals involved.
Change the SRAM region "claimed" field from a boolean to a reference
count. A claim will increment the count, while a release decreases it.
The first claim will trigger the register value write. The driver
otherwise behaves as before.
Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://patch.msgid.link/20260324164357.1607247-5-wens@kernel.org
Signed-off-by: Chen-Yu Tsai <wens@kernel.org>
The Allwinner H616 has two switchable peripheral SRAM regions:
- The VE SRAM is a 2 MB dedicated SRAM for the Video Engine. CPU access
to this region is enabled by default. CPU access can be disabled,
after which reads will show the same stale value for all addresses,
while writes are ignored.
The mux value for this region is different from previous generations.
- The SRAM C region is an alias of the first 128 KB of VE SRAM, plus 64
KB of DE SRAM. The latter is otherwise unaccessible from the CPU. When
CPU access is disabled, the whole region reads as zero, while writes
are ignored.
The mux value for this region is the same as on the A64 and H6.
Add compatible strings for both of them.
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://patch.msgid.link/20260324164357.1607247-3-wens@kernel.org
Signed-off-by: Chen-Yu Tsai <wens@kernel.org>
The Allwinner H616 has two switchable peripheral SRAM regions:
- The VE SRAM is a 2 MB dedicated SRAM for the Video Engine. CPU access
to this region is enabled by default. CPU access can be disabled,
after which reads will show the same stale value for all addresses,
while writes are ignored.
The mux value for this region is different from previous generations,
and thus needs a completely new compatible.
- The SRAM C region is an alias of the first 128 KB of VE SRAM, plus 64
KB of DE SRAM. The latter is otherwise unaccessible from the CPU. When
CPU access is disabled, the whole region reads as zero, while writes
are ignored.
The mux value for this region is the same as on the A64 and H6. The
existing compatible for the A64 already covers this.
Add the compatible for the VE SRAM to the list of covered compatibles in
the generic SRAM region binding.
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://patch.msgid.link/20260324164357.1607247-2-wens@kernel.org
Signed-off-by: Chen-Yu Tsai <wens@kernel.org>
Revert b0e85c3c85 ("PCI: Add Kconfig options for MPS/MRRS strategy"),
which allowed build-time selection of the "off", "default", "safe",
"performance", or "peer2peer" strategies for MPS and MRRS configuration.
These strategies can be selected at boot-time using the
"pci=pcie_bus_tune_*" kernel parameters.
Per the discussion mentioned below, these Kconfig options were added to
work around a hardware defect in a WiFi device used in a cable modem. The
defect occurred only when the device was configured with MPS=128, and
Kconfig was a way to avoid that setting. It was easier for the modem
vendor to use Kconfig and update the kernel image than to change the kernel
parameters.
Neither Kconfig nor kernel parameters are a complete solution because the
broken WiFi device may be used in other systems where it may be configured
with MPS=128 and be susceptible to the defect.
Remove the Kconfig settings to simplify the MPS code. If we can identify
the WiFi device in question, we may be able to make a generic quirk to
avoid the problem on all system.
This is not a fix and should not be backported to previous kernels.
Link: https://lore.kernel.org/all/CA+-6iNzd0RJO0L021qz8CKrSviSst6QehY-QtJxz_-EVY0Hj0Q@mail.gmail.com
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Link: https://patch.msgid.link/20260326221311.1356180-1-bhelgaas@google.com
Extend the checks in pcim_p2pdma_init() and pcim_p2pdma_provider() to
exclude functions that have pdev->non_mappable_bars set.
Consumers such as VFIO were previously able to map these for access by the
CPU or P2P. Update the comment on non_mappable_bars to show it refers to
any access, not just userspace CPU access.
Fixes: 372d6d1b8a ("PCI/P2PDMA: Refactor to separate core P2P functionality from memory allocation")
Suggested-by: Alex Williamson <alex@shazbot.org>
Signed-off-by: Matt Evans <mattev@meta.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Niklas Schnelle <schnelle@linux.ibm.com>
Reviewed-by: Alex Williamson <alex@shazbot.org>
Link: https://patch.msgid.link/20260423173051.1999679-1-mattev@meta.com
pci_pwrctrl_is_required() detects whether a device needs PCI pwrctrl
support. It is currently used in pci_pwrctrl_create_device(), but not in
pci_pwrctrl_power_{on/off}_device() APIs. This leads to pwrctrl core trying
to power on/off incompatible devices like USB hub downstream ports defined
in DT.
Add this check to prevent pwrctrl core from poking at wrong devices.
Fixes: b35cf3b6aa ("PCI/pwrctrl: Add APIs to power on/off pwrctrl devices")
Reported-by: Krishna Chaitanya Chundru <krishna.chundru@oss.qualcomm.com>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@oss.qualcomm.com>
[bhelgaas: split pci_pwrctrl_is_required() move to separate patch]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Link: https://patch.msgid.link/20260421104102.12322-1-manivannan.sadhasivam@oss.qualcomm.com
Move pci_pwrctrl_is_required() earlier in the file so it can be used by
pci_pwrctrl_power_off_device() and pci_pwrctrl_power_on_device().
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@oss.qualcomm.com>
[bhelgaas: split to its own patch]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Link: https://patch.msgid.link/20260421104102.12322-1-manivannan.sadhasivam@oss.qualcomm.com
sriov_restore_vf_rebar_state() uses the VF Resizable BAR Control register
to decide how many VF BARs to restore (nbars) and which VF BAR each
iteration addresses (bar_idx). bar_idx indexes into dev->sriov->barsz[],
which has only PCI_SRIOV_NUM_BARS (6) entries.
When a device does not respond, config reads typically return
PCI_ERROR_RESPONSE (~0). Both fields are 3 bits wide, so nbars and bar_idx
both evaluate to 7. The barsz[] access then goes out of bounds. UBSAN
reports this as:
UBSAN: array-index-out-of-bounds in drivers/pci/iov.c:948:51 index 7 is out of range for type 'resource_size_t [6]'
Observed on an NVIDIA RTX PRO 1000 GPU (GB207GLM) that stopped responding
during a failed GC6 power state exit. The subsequent pci_restore_state()
invoked sriov_restore_vf_rebar_state() while config reads returned
0xffffffff, triggering the splat.
Bail out if any VF Resizable BAR Control read returns PCI_ERROR_RESPONSE.
No further VF BARs are touched, which is safe because a config read that
returns PCI_ERROR_RESPONSE indicates the device is unreachable and
restoration is pointless. This mirrors the guard in
pci_restore_rebar_state().
Fixes: 5a8f77e24a ("PCI/IOV: Restore VF resizable BAR state after reset")
Signed-off-by: Marco Nenciarini <mnencia@kcore.it>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/44a4ae53ec2825816b816c85cd378430d9a95cc6.1776429882.git.mnencia@kcore.it
pci_restore_rebar_state() uses the Resizable BAR Control register to decide
how many BARs to restore (nbars) and which BAR each iteration addresses
(bar_idx).
When a device does not respond, config reads typically return
PCI_ERROR_RESPONSE (~0). Both fields are 3 bits wide, so nbars and bar_idx
both evaluate to 7, past the spec's valid ranges for both fields.
pci_resource_n() then returns an unrelated resource slot, whose size is
used to derive a nonsensical value written back to the Resizable BAR
Control register.
Bail out if any Resizable BAR Control read returns PCI_ERROR_RESPONSE. No
further BARs are touched, which is safe because a config read that returns
PCI_ERROR_RESPONSE indicates the device is unreachable and restoration is
pointless.
Fixes: d3252ace0b ("PCI: Restore resized BAR state on resume")
Signed-off-by: Marco Nenciarini <mnencia@kcore.it>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/666cac19b5daa0ab0e0ab64454e76b4d24465dbd.1776429882.git.mnencia@kcore.it
When a PCI device is unbound from its driver, pci_device_remove() sets the
cached power state in pci_dev->current_state to PCI_UNKNOWN. This was
introduced by commit 2449e06a56 ("PCI: reset pci device state to unknown
state for resume") to invalidate the cached power state in case the system
is subsequently put to sleep.
For bound devices, the cached power state is set to PCI_UNKNOWN in
pci_pm_suspend_noirq(), immediately before entering system sleep.
Extend to unbound devices for consistency.
This obviates the need to change the cached power state on unbind, so stop
doing so.
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Mario Limonciello (AMD) <superm1@kernel.org>
Link: https://patch.msgid.link/af7d11d3ceb231acc90829f7a5c8400c2446744f.1776415510.git.lukas@wunner.de
When ntfs_attr_get_search_ctx() fails and returns NULL, the function
returned early without calling put_page(ipage).
Fix this by jumping to err_out label on error. The err_out path now
properly releases the page and the mutex, with a NULL check for
the search context.
Reported-by: DaeMyung Kang <charsyam@gmail.com>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Without poweroff node Exynos850-based board continue to draw current
(around ~60 mA with my test setup) after poweroff. Kernel also reports
different lockup problems and RCU stalls warnings continuosly after
last kernel messages about hardware being switched off.
Turns out we missed a write to PMU's PS_HOLD_CONTROL (PMU + 0x30c)
register that actually switches the SoC off.
Add poweroff node that implements this.
With this change the current draw after power off is in range of few
milliampers and lockup messages are no more.
Signed-off-by: Alexey Klimov <alexey.klimov@linaro.org>
Link: https://patch.msgid.link/20260325-exynos850-poweroff-v1-1-34c19c06e74d@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
In ntfs_mapping_pairs_decompress(), lowest_vcn is read from
on-disk metadata and used as the initial vcn without validation.
A malformed value can introduce an invalid (e.g. negative) vcn,
corrupting the runlist from the start.
Additionally, the accumulation
vcn += deltaxcn
does not check for s64 overflow. A crafted mapping pairs array
can wrap vcn to a negative value, breaking the monotonically-
increasing invariant relied upon by ntfs_rl_vcn_to_lcn() and
related helpers.
Fix this by validating lowest_vcn and using check_add_overflow()
for vcn accumulation.
Signed-off-by: Zhan Xusheng <zhanxusheng@xiaomi.com>
Reviewed-by: Hyunchul Lee <hyc.lee@gmail.com>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
ntfs_reparse_set_wsl_symlink() converts the symlink target into an
allocated NLS string and transfers ownership to ni->target only after
ntfs_set_ntfs_reparse_data() succeeds. If setting the reparse data fails,
the converted target is left unreferenced and leaks.
Free the converted target on the reparse update failure path. Use kfree()
for the other local failure path as well, matching the ntfs_ucstonls()
allocation contract.
Fixes: fc053f05ca ("ntfs: add reparse and ea operations")
Signed-off-by: DaeMyung Kang <charsyam@gmail.com>
Reviewed-by: Hyunchul Lee <hyc.lee@gmail.com>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
ntfs_index_walk_down() allocates ictx->ib when descending from the root
into an index allocation block. If that allocation fails, the old code
still passes the NULL buffer to ntfs_ib_read(), which can write through
it via ntfs_inode_attr_pread().
Allocate the index block into a temporary pointer and return -ENOMEM
before changing the index context on allocation failure. Also propagate
ERR_PTR() through ntfs_index_next() and ntfs_readdir() so walk-down
allocation or index block read failures are not mistaken for normal
index iteration inside the filesystem.
ntfs_readdir() keeps the existing userspace-visible behavior of
suppressing readdir errors after marking end_in_iterate; this change only
prevents the walk-down failure path from dereferencing NULL internally.
The failure was reproduced with failslab fail-nth injection on getdents64;
the original module hits a NULL pointer dereference in memcpy_orig through
ntfs_ib_read(), while the patched module reaches the same
ntfs_index_walk_down() allocation failure without crashing.
Fixes: 0a8ac0c1fa ("ntfs: update directory operations")
Signed-off-by: DaeMyung Kang <charsyam@gmail.com>
Reviewed-by: Hyunchul Lee <hyc.lee@gmail.com>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Param used for setting FW trace mask at module load time. Other debugfs
entry exist to allow update at run time.
Signed-off-by: Brajesh Gupta <brajesh.gupta@imgtec.com>
Reviewed-by: Alessio Belle <alessio.belle@imgtec.com>
Link: https://patch.msgid.link/20260427-ftrace_fix-v3-2-e081530759a8@imgtec.com
Signed-off-by: Matt Coster <matt.coster@imgtec.com>
Modernize string-to-number conversion in mtdsuper.c by replacing
simple_strtoul with kstrtouint. This change provides proper type safety
for MTD device numbers which are non-negative integers.
Using kstrtouint avoids unsigned long to int conversion and is more
appropriate for device indices. The debug output format specifier is
updated to %u for unsigned int.
Signed-off-by: Haoyu Lu <hechushiguitu666@gmail.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Replace deprecated simple_strtoul with kstrtouint for better error
handling and type safety. The kstrtouint function provides stricter
validation, automatically rejecting inputs like "123abc" that
simple_strtoul would partially accept.
Using kstrtouint avoids unsigned long to int conversion and is more
appropriate for MTD device indices which are non-negative integers.
Signed-off-by: Haoyu Lu <hechushiguitu666@gmail.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Various names for Qualcomm as a company are used in user-visible config
options: QCOM, Qualcomm and Qualcomm Technologies. Switch to unified
"Qualcomm" so it will be easier for users to identify the options when
for example running menuconfig.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
In most scenarios this variant is actually unused (VCR is written in
SSDR mode), but we need to provide an octal variant. The address is 24
bits but is sent over 4 bytes MSB first. This means we need to shift the
register address by one extra byte for the address to be correct.
I didn't catch this initially because the volatile register region is
256 bytes wide, so the write-then-read procedure did work with the small
register addresses I was using at that time: 0 and 1.
Fixes: 44a2f49b9b ("mtd: spinand: winbond: W35N octal DTR support")
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Both W35N02JW and W35N04JW diverge from W35N01JW when it comes to the
"data read" operation in ODTR mode. In order to stuff more address
bits (up to 18), the second command byte is replaced by the most
significant address bits, keeping the number of address bytes to 2.
Fixes: 44a2f49b9b ("mtd: spinand: winbond: W35N octal DTR support")
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Some devices stuff address bits in the double byte opcode (in place of
the repeated byte) in order to be able to increase the size of the
devices, without adding extra address bytes.
Create a flag to identify those devices. When the flag is set, use the
"packed" variant for the read data operation.
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Sashiko noticed an out-of-bounds read [1].
In spi_nor_params_show(), the snor_f_names array is passed to
spi_nor_print_flags() using sizeof(snor_f_names).
Since snor_f_names is an array of pointers, sizeof() returns the total
number of bytes occupied by the pointers
(element_count * sizeof(void *))
rather than the element count itself. On 64-bit systems, this makes the
passed length 8x larger than intended.
Inside spi_nor_print_flags(), the 'names_len' argument is used to
bounds-check the 'names' array access. An out-of-bounds read occurs
if a flag bit is set that exceeds the array's actual element count
but is within the inflated byte-size count.
Correct this by using ARRAY_SIZE() to pass the actual number of
string pointers in the array.
Cc: stable@vger.kernel.org
Fixes: 0257be79fc ("mtd: spi-nor: expose internal parameters via debugfs")
Closes: https://sashiko.dev/#/patchset/20260417-die-erase-fix-v2-1-73bb7004ebad%40infineon.com [1]
Signed-off-by: Tudor Ambarus <tudor.ambarus@linaro.org>
Reviewed-by: Takahiro Kuwano <takahiro.kuwano@infineon.com>
Reviewed-by: Michael Walle <mwalle@kernel.org>
Reviewed-by: Pratyush Yadav <pratyush@kernel.org>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
mfill_copy_folio_retry() drops mmap_lock for the copy_from_user() call.
During this window, the VMA can be replaced with a different type (e.g.
hugetlb), making the caller's ops pointer stale. Subsequent use of the
stale ops would dispatch into the wrong per-vma handlers.
Capture the VMA's ops via vma_uffd_ops() before dropping the lock and
compare against the current vma_uffd_ops() after re-acquiring it.
Return -EAGAIN if they differ so the operation can be retried. This
avoids comparing against the caller's ops which may have been
overridden to anon_uffd_ops for MAP_PRIVATE file-backed mappings.
Link: https://lore.kernel.org/20260424183638.196227-1-devnexen@gmail.com
Fixes: 6ab703034f ("userfaultfd: mfill_atomic(): remove retry logic")
Reported-by: Usama Arif <usama.arif@linux.dev>
Closes: https://lore.kernel.org/all/20260410114809.3592720-1-usama.arif@linux.dev/
Signed-off-by: David Carlier <devnexen@gmail.com>
Acked-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
Cc: Jann Horn <jannh@google.com>
Cc: Liam Howlett <liam.howlett@oracle.com>
Cc: Lorenzo Stoakes <ljs@kernel.org>
Cc: Peter Xu <peterx@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
DAMON_STAT updates 'enabled' parameter value, which represents the running
status of its kdamond, when the user explicitly requests start/stop of the
kdamond. The kdamond can, however, be stopped even if the user explicitly
requested the stop, if ctx->regions_score_histogram allocation failure at
beginning of the execution of the kdamond. Hence, if the kdamond is
stopped by the allocation failure, the value of the parameter can be
stale.
Users could show the stale value and be confused. The problem will only
rarely happen in real and common setups because the allocation is arguably
too small to fail. Also, unlike the similar bugs that are now fixed in
DAMON_RECLAIM and DAMON_LRU_SORT, kdamond can be restarted in this case,
because DAMON_STAT force-updates the enabled parameter value for user
inputs. The bug is a bug, though.
The issue stems from the fact that there are multiple events that can
change the status, and following all the events is challenging.
Dynamically detect and use the fresh status for the parameters when those
are requested.
The issue was dicovered [1] by Sashiko.
Link: https://lore.kernel.org/20260419161003.79176-4-sj@kernel.org
Link: https://lore.kernel.org/20260416040602.88665-1-sj@kernel.org [1]
Fixes: 369c415e60 ("mm/damon: introduce DAMON_STAT module")
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: Liew Rui Yan <aethernet65535@gmail.com>
Cc: <stable@vger.kernel.org> # 6.17.x
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
