Add a MAINTAINERS entry for the CPPC driver, with a list of reviewers
from multiple organizations.
Also sort the list alphabetically while doing so.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Add driver for clock controller in Tenstorrent Atlantis SoC. This version
of the driver covers clocks from RCPU subsystem.
5 types of clocks generated by this controller: PLLs (PLLs
with bypass functionality and an additional Gate clk at output), Shared
Gates (Multiple Gate clks that share an enable bit), standard Muxes,
Dividers and Gates. All clocks are implemented using custom clk ops and
use the regmap interface associated with the syscon. All clocks are derived
from a 24 Mhz oscillator.
The reset controller is also setup as an auxiliary device of the clock
controller.
Signed-off-by: Anirudh Srinivasan <asrinivasan@oss.tenstorrent.com>
Reviewed-by: Brian Masney <bmasney@redhat.com>
Reviewed-by: Drew Fustini <fustini@kernel.org>
Signed-off-by: Drew Fustini <fustini@kernel.org>
Adds Atlantis Reset Controller driver, which shares the same regmap as
prcm ( clock controller).
This version of the reset controller driver covers resets from the RCPU
prcm.
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Acked-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Anirudh Srinivasan <asrinivasan@oss.tenstorrent.com>
Reviewed-by: Drew Fustini <fustini@kernel.org>
Signed-off-by: Drew Fustini <fustini@kernel.org>
Document bindings for Tenstorrent Atlantis PRCM that manages clocks
and resets. This block is instantiated multiple times in the SoC.
This commit documents the clocks from the RCPU PRCM block.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Signed-off-by: Anirudh Srinivasan <asrinivasan@oss.tenstorrent.com>
Reviewed-by: Drew Fustini <fustini@kernel.org>
Signed-off-by: Drew Fustini <fustini@kernel.org>
When changing channels, the current check in bnxt_set_channels()
is not checking for non-default RSS contexts when the RSS table size
changes. The current check for IFF_RXFH_CONFIGURED is only sufficient
for the default RSS context. Expand the check to include the presence
of any non-default RSS contexts.
Allowing such change will result in incorrect configuration of the
context's RSS table when the table size changes.
Fixes: b3d0083caf ("bnxt_en: Support RSS contexts in ethtool .{get|set}_rxfh()")
Reported-by: Björn Töpel <bjorn@kernel.org>
Link: https://lore.kernel.org/netdev/20260303181535.2671734-1-bjorn@kernel.org/
Reviewed-by: Andy Gospodarek <andrew.gospodarek@broadcom.com>
Signed-off-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Link: https://patch.msgid.link/20260306225854.3575672-1-michael.chan@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Oleksij Rempel says:
====================
net: usb: lan78xx: accumulated bug fixes
This series contains a collection of standalone bug fixes for the
Microchip LAN78xx driver, addressing packet handling, TX statistics,
invalid register accesses, and a kernel warning during disconnect.
====================
Link: https://patch.msgid.link/20260305143429.530909-1-o.rempel@pengutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Do not configure Latency Tolerance Messaging (LTM) on USB 2.0 hardware.
The LAN7850 is a High-Speed (USB 2.0) only device and does not support
SuperSpeed features like LTM. Currently, the driver unconditionally
attempts to configure LTM registers during initialization. On the
LAN7850, these registers do not exist, resulting in writes to invalid
or undocumented memory space.
This issue was identified during a port to the regmap API with strict
register validation enabled. While no functional issues or crashes have
been observed from these invalid writes, bypassing LTM initialization
on the LAN7850 ensures the driver strictly adheres to the hardware's
valid register map.
Fixes: 55d7de9de6 ("Microchip's LAN7800 family USB 2/3 to 10/100/1000 Ethernet device driver")
Cc: stable@vger.kernel.org
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Link: https://patch.msgid.link/20260305143429.530909-4-o.rempel@pengutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Account for hardware auto-padding in TX byte counters to reflect actual
wire traffic.
The LAN7850 hardware automatically pads undersized frames to the minimum
Ethernet frame length (ETH_ZLEN, 60 bytes). However, the driver tracks
the network statistics based on the unpadded socket buffer length. This
results in the tx_bytes counter under-reporting the actual physical
bytes placed on the Ethernet wire for small packets (like short ARP or
ICMP requests).
Use max_t() to ensure the transmission statistics accurately account for
the hardware-generated padding.
Fixes: d383216a7e ("lan78xx: Introduce Tx URB processing improvements")
Cc: stable@vger.kernel.org
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Link: https://patch.msgid.link/20260305143429.530909-3-o.rempel@pengutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Do not drop packets with checksum errors at the USB driver level;
pass them to the network stack.
Previously, the driver dropped all packets where the 'Receive Error
Detected' (RED) bit was set, regardless of the specific error type. This
caused packets with only IP or TCP/UDP checksum errors to be dropped
before reaching the kernel, preventing the network stack from accounting
for them or performing software fallback.
Add a mask for hard hardware errors to safely drop genuinely corrupt
frames, while allowing checksum-errored frames to pass with their
ip_summed field explicitly set to CHECKSUM_NONE.
Fixes: 55d7de9de6 ("Microchip's LAN7800 family USB 2/3 to 10/100/1000 Ethernet device driver")
Cc: stable@vger.kernel.org
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Link: https://patch.msgid.link/20260305143429.530909-2-o.rempel@pengutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Russell King says:
====================
net: stmmac: further ptp cleanups
The first uses a local variable when setting n_ext_ts which is a minor
simplification of the code. The second removes the now unnecessary
"available" flag for the PPS outputs.
====================
Link: https://patch.msgid.link/aawDiK7DjcSXSs1X@shell.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
priv->pps[].available is set in stmmac_ptp_register() for all PPS
outputs reported by hardware up to STMMAC_PPS_MAX.
Since we now set priv->ptp_clock_ops.n_per_out to the number of PPS
outputs that both the hardware and driver can support to prevent
array overflow in stmmac_enable(), this makes priv->pps[].available
redundant. Remove this struct member.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/E1vypHc-0000000CSbl-1X6v@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
stmmac_dwmac4_get_mac_addr() is identical to stmmac_get_mac_addr().
Remove stmmac_dwmac4_get_mac_addr() to avoid this code duplication.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/E1vypJM-0000000CSiJ-48yO@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
To make the printing of HFSC's defcls consistent with HTB's,
iproute2 is now printing defcls prepended with "0x".
This commit adapts test a4c3 to this change.
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: Victor Nogueira <victor@mojatatu.com>
Link: https://patch.msgid.link/20260307220724.2501212-1-victor@mojatatu.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
tcp_chrono_start() is small enough, and used in TCP sendmsg()
fast path (from tcp_skb_entail()).
Note clang is already inlining it from functions in tcp_output.c.
Inlining it improves performance and reduces bloat :
$ scripts/bloat-o-meter -t vmlinux.old vmlinux.new
add/remove: 0/2 grow/shrink: 1/0 up/down: 1/-84 (-83)
Function old new delta
tcp_skb_entail 280 281 +1
__pfx_tcp_chrono_start 16 - -16
tcp_chrono_start 68 - -68
Total: Before=25192434, After=25192351, chg -0.00%
Note that tcp_chrono_stop() is too big.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Neal Cardwell <ncardwell@google.com>
Link: https://patch.msgid.link/20260308123549.2924460-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
chrono_type is currently in tcp_sock_read_txrx group, which
is supposed to hold read-mostly fields.
But chrono_type is mostly written in tx path, it should
be moved to tcp_sock_write_tx group, close to other
chrono fields (chrono_stat[], chrono_start).
Note this adds holes, but data locality is far more important.
Use a full u8 for the time being, compiler can generate
more efficient code.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Neal Cardwell <ncardwell@google.com>
Link: https://patch.msgid.link/20260308122302.2895067-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Some modern cpus disable X86_FEATURE_RETPOLINE feature,
even if a direct call can still be beneficial.
Even when IBRS is present, an indirect call is more expensive
than a direct one:
Direct Calls:
Compilers can perform powerful optimizations like inlining,
where the function body is directly inserted at the call site,
eliminating call overhead entirely.
Indirect Calls:
Inlining is much harder, if not impossible, because the compiler
doesn't know the target function at compile time.
Techniques like Indirect Call Promotion can help by using
profile-guided optimization to turn frequently taken indirect calls
into conditional direct calls, but they still add complexity
and potential overhead compared to a truly direct call.
In this patch, I split tc_skip_wrapper in two different
static keys, one for tc_act() (tc_skip_wrapper_act)
and one for tc_classify() (tc_skip_wrapper_cls).
Then I enable the tc_skip_wrapper_cls only if the count
of builtin classifiers is above one.
I enable tc_skip_wrapper_act only it the count of builtin
actions is above one.
In our production kernels, we only have CONFIG_NET_CLS_BPF=y
and CONFIG_NET_ACT_BPF=y. Other are modules or are not compiled.
Tested on AMD Turin cpus, cls_bpf_classify() cost went
from 1% down to 0.18 %, and FDO will be able to inline
it in tcf_classify() for further gains.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Reviewed-by: Pedro Tammela <pctammela@mojatatu.com>
Reviewed-by: Victor Nogueira <victor@mojatatu.com>
Link: https://patch.msgid.link/20260307133601.3863071-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Commit 18fd64d254 ("netns-ipv4: reorganize netns_ipv4 fast path
variables") missed that __tcp_select_window() is reading
net->ipv4.sysctl_tcp_shrink_window.
Move this field to netns_ipv4_read_txrx group, as __tcp_select_window()
is used both in tx and rx paths.
Saves a potential cache line miss.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20260307092214.2433548-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Flow control source port mapping for USB serdes needs to be configured
according to the GDM port nbq parameter. This is a preliminary patch
since nbq parameter is specific for the given port serdes and needs to
be read from the DTS (in the current codebase is assigned statically).
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Link: https://patch.msgid.link/20260306-airoha-fix-loopback-for-usb-serdes-v2-1-319de9c96826@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Enable support for UDP GSO when using DQO format. Advertise the feature
flag during device initialization and enable offload by default.
Signed-off-by: Ankit Garg <nktgrg@google.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Harshitha Ramamurthy <hramamurthy@google.com>
Link: https://patch.msgid.link/20260306224816.3391551-1-hramamurthy@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
fib6_nexthop() retrieves the link-local address for two interfaces used
in the test. However, both lldummy and llv1 are obtained from dummy0.
llv1 is expected to be retrieved from veth1, which is the interface used
later in the test. The subsequent check and error message also expect
the address to be retrieved from veth1.
Fix this by retrieving llv1 from veth1.
Signed-off-by: Alok Tiwari <alok.a.tiwari@oracle.com>
Link: https://patch.msgid.link/20260306180830.2329477-1-alok.a.tiwari@oracle.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Convert remaining users of of_gpio.h to using GPIO descriptors and
remove the header.
-----BEGIN PGP SIGNATURE-----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=5K56
-----END PGP SIGNATURE-----
Merge tag 'ib-gpio-remove-of-gpio-h-for-v7.1' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux into mbox
Bartosz Golaszewski says:
====================
Immutable branch between GPIO and net
Convert remaining users of of_gpio.h to using GPIO descriptors and
remove the header.
* tag 'ib-gpio-remove-of-gpio-h-for-v7.1' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux:
gpio: remove of_get_named_gpio() and <linux/of_gpio.h>
nfc: nfcmrvl: convert to gpio descriptors
nfc: s3fwrn5: convert to gpio descriptors
====================
Link: https://patch.msgid.link/20260309093153.10446-1-bartosz.golaszewski@oss.qualcomm.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Currently, ppp_input_error() indicates an error by allocating a 0-length
skb and calling ppp_do_recv(). It takes an error code argument, which is
stored in skb->cb, but not used by ppp_receive_frame().
Simplify the error handling by removing the unused parameter and the
unnecessary skb allocation. Instead, call ppp_receive_error() directly
from ppp_input_error() under the recv lock, and the length check in
ppp_receive_frame() can be removed.
Signed-off-by: Qingfang Deng <dqfext@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
rtnl_kfree_skbs() reduces RTNL and qdisc spinlock hold time.
skbs are freed later after RTNL has been released.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20260306133154.678730-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The driver uses packet-type (RX/TX) PTP-message type and PTP-sequence
number to identify a matching timestamp packet for a skb. If the same
PTP packet arrives on both ports (as in a PRP environment) then it is
not obvious which event belongs to which skb.
The event contains also the port number on which it was received.
Instead of masking it out, use it for matching.
Tested-by: Chintan Vankar <c-vankar@ti.com>
Reviewed-by: Martin Kaistra <martin.kaistra@linutronix.de>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Link: https://patch.msgid.link/20260306144439.cVwaaopR@linutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
include/net/tc_wrapper.h changes should be reviewed by TC maintainers.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Jamal Hadi Salim <jhs@mojatatu.com>
Link: https://patch.msgid.link/20260307120607.3504191-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Following typical script is extremely disruptive,
because each graft operation calls dev_deactivate()
which resets all the queues of the device.
QPARAM="limit 100000 flow_limit 1000 buckets 4096"
TXQS=64
for ETH in eth1
do
tc qd del dev $ETH root 2>/dev/null
tc qd add dev $ETH root handle 1: mq
for i in `seq 1 $TXQS`
do
slot=$( printf %x $(( i )) )
tc qd add dev $ETH parent 1:$slot fq $QPARAM
done
done
One can add "ip link set dev $ETH down/up" to reduce the disruption time:
QPARAM="limit 100000 flow_limit 1000 buckets 4096"
TXQS=64
for ETH in eth1
do
ip link set dev $ETH down
tc qd del dev $ETH root 2>/dev/null
tc qd add dev $ETH root handle 1: mq
for i in `seq 1 $TXQS`
do
slot=$( printf %x $(( i )) )
tc qd add dev $ETH parent 1:$slot fq $QPARAM
done
ip link set dev $ETH up
done
Or we can add a @reset_needed flag to dev_deactivate() and
dev_deactivate_many().
This flag is set to true at device dismantle or linkwatch_do_dev(),
and to false for graft operations.
In the future, we might only stop one queue instead of the whole
device, ie call dev_deactivate_queue() instead of dev_deactivate().
I think the problem (quadratic behavior) was added in commit
2fb541c862 ("net: sch_generic: aviod concurrent reset and enqueue op
for lockless qdisc") but this does not look serious enough to deserve
risky backports.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Yunsheng Lin <linyunsheng@huawei.com>
Reviewed-by: Jamal Hadi Salim <jhs@mojatatu.com>
Reviewed-by: Toke Høiland-Jørgensen <toke@redhat.com>
Reviewed-by: Victor Nogueira <victor@mojatatu.com>
Link: https://patch.msgid.link/20260307163430.470644-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
If incoming skb dst matches the socket cached one,
there is no need to call again dst->ops->check().
Network layer already validated the skb dst for us,
usually from tcp_v{4,6}_early_demux().
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20260306154322.1086539-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Combining the allocations simplifies things, especially the free path.
Remove ofdpa_group_tbl_entry_free as a result. kfree is shorter.
Add __counted_by for extra runtime analysis.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Acked-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Link: https://patch.msgid.link/20260306025449.12333-1-rosenp@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
tcp_v4_early_demux() has a single caller : ip_rcv_finish_core().
Move it to net/ipv4/ip_input.c and mark it static, for possible
compiler/linker optimizations.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20260306131130.654991-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
hash_size is declared but never read. The MD5 path always uses a
fixed size of 16, and the TCP-AO path uses tcp_ao_maclen().
This closes a 7-byte hole and reduces the struct size from 96 to
88 bytes.
Suggested-by: Jakub Sitnicki <jakub@cloudflare.com>
Signed-off-by: Keita Morisaki <kmta1236@gmail.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20260307051619.51685-1-kmta1236@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When removing a nexthop from a group, remove_nh_grp_entry() publishes
the new group via rcu_assign_pointer() then immediately frees the
removed entry's percpu stats with free_percpu(). However, the
synchronize_net() grace period in the caller remove_nexthop_from_groups()
runs after the free. RCU readers that entered before the publish still
see the old group and can dereference the freed stats via
nh_grp_entry_stats_inc() -> get_cpu_ptr(nhge->stats), causing a
use-after-free on percpu memory.
Fix by deferring the free_percpu() until after synchronize_net() in the
caller. Removed entries are chained via nh_list onto a local deferred
free list. After the grace period completes and all RCU readers have
finished, the percpu stats are safely freed.
Fixes: f4676ea74b ("net: nexthop: Add nexthop group entry stats")
Cc: stable@vger.kernel.org
Signed-off-by: Mehul Rao <mehulrao@gmail.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Link: https://patch.msgid.link/20260306233821.196789-1-mehulrao@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
With the current sfp_fixup_ignore_tx_fault() fixup we ignore the TX_FAULT
signal, but we also need to apply sfp_fixup_ignore_los() in order to be
able to communicate with the module even if the fiber isn't connected for
configuration purposes.
This is needed for all the MA5671a firmwares, excluding the FS modded
firmware.
Fixes: 2069624dac ("net: sfp: Add tx-fault workaround for Huawei MA5671A SFP ONT")
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20260306125139.213637-1-noltari@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Use dev_err_probe() to add a reason for deferred probe. This can
especially happen on lcdif3 which uses hdmi_tx_phy for 'pix' clock
Reviewed-by: Liu Ying <victor.liu@nxp.com>
Reviewed-by: Marco Felsch <m.felsch@pengutronix.de>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Liu Ying <victor.liu@nxp.com>
Link: https://lore.kernel.org/r/20260304140426.1499446-1-alexander.stein@ew.tq-group.com
Add SPDX-License-Identifier lines to several source
files under the network sub-directory. Work on files
in the core, dns_resolver, ipv4, ipv6 and
netfilter sub-dirs. Remove boilerplate
and license reference text to avoid ambiguity.
Rusty Russell has expressed that his contributions
were intended to be GPL-2.0-or-later.
Signed-off-by: Tim Bird <tim.bird@sony.com>
Link: https://patch.msgid.link/20260305004724.87469-1-tim.bird@sony.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
graph_util_is_ports0() identifies DPCM front-end (ports@0) vs back-end
(ports@1) by calling of_get_child_by_name() to find the first "ports"
child and comparing pointers. This relies on child iteration order
matching DTS source order.
When the DPCM topology comes from a DT overlay, __of_attach_node()
inserts new children at the head of the sibling list, reversing the
order. of_get_child_by_name() then returns ports@1 instead of ports@0,
causing all front-end links to be classified as back-ends. The card
registers with no PCM devices.
Fix this by matching the unit address directly from the node name
instead of relying on sibling order.
Fixes: 9293925245 ("ASoC: simple-card-utils: add asoc_graph_is_ports0()")
Signed-off-by: Sen Wang <sen@ti.com>
Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://patch.msgid.link/20260309042109.2576612-1-sen@ti.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Merge series from "Sheetal ." <sheetal@nvidia.com>:
Add Tegra238 sound card support in the Tegra audio graph card driver,
as Tegra238 requires different PLLA and PLLA_OUT0 clock rates compared
to other Tegra platforms.
Jakub Kicinski says:
====================
tools: ynl: convert samples into selftests
The "samples" were always poor man's tests, used to manually
confirm that C YNL works as expected. Since a proper tests/
directory now exists move the samples and use the kselftest
harness to turn them into selftests outputting KTAP.
====================
Link: https://patch.msgid.link/20260307033630.1396085-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Convert rt-route.c to use kselftest_harness.h with FIXTURE/TEST_F.
This is the last test to convert so clean up the Makefile.
Validate that the connected routes for 192.168.1.0/24 and
2001:db8::/64 appear in the dump.
Output:
TAP version 13
1..1
# Starting 1 tests from 1 test cases.
# RUN rt_route.dump ...
# oif: nsim0 dst: 192.168.1.0/24
# oif: lo dst: ::1/128
# oif: nsim0 dst: 2001:db8::1/128
# oif: nsim0 dst: 2001:db8::/64
# oif: nsim0 dst: fe80::/64
# oif: nsim0 dst: ff00::/8
# OK rt_route.dump
ok 1 rt_route.dump
# PASSED: 1 / 1 tests passed.
# Totals: pass:1 fail:0 xfail:0 xpass:0 skip:0 error:0
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Tested-by: Donald Hunter <donald.hunter@gmail.com>
Link: https://patch.msgid.link/20260307033630.1396085-11-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Convert rt-addr.c to use kselftest_harness.h with FIXTURE/TEST_F.
Validate that the addresses configured by the wrapper (192.168.1.1
and 2001:db8::1) appear in the dump.
Output:
TAP version 13
1..1
# Starting 1 tests from 1 test cases.
# RUN rt_addr.dump ...
# lo: 127.0.0.1
# nsim0: 192.168.1.1
# lo: ::1
# nsim0: 2001:db8::1
# nsim0: fe80::7c66:c9ff:fe5f:bf01
# OK rt_addr.dump
ok 1 rt_addr.dump
# PASSED: 1 / 1 tests passed.
# Totals: pass:1 fail:0 xfail:0 xpass:0 skip:0 error:0
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Tested-by: Donald Hunter <donald.hunter@gmail.com>
Link: https://patch.msgid.link/20260307033630.1396085-10-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Convert ethtool.c to use kselftest_harness.h with FIXTURE/TEST_F.
Move ethtool from BINS to TEST_GEN_FILES and add ethtool.sh wrapper
which sets up a netdevsim device before running the test binary.
Output:
TAP version 13
1..2
# Starting 2 tests from 1 test cases.
# RUN ethtool.channels ...
# nsim0: combined 1
# OK ethtool.channels
ok 1 ethtool.channels
# RUN ethtool.rings ...
# nsim0: rx 512 tx 512
# OK ethtool.rings
ok 2 ethtool.rings
# PASSED: 2 / 2 tests passed.
# Totals: pass:2 fail:0 xfail:0 xpass:0 skip:0 error:0
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Tested-by: Donald Hunter <donald.hunter@gmail.com>
Link: https://patch.msgid.link/20260307033630.1396085-9-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Convert devlink.c to use kselftest_harness.h with FIXTURE/TEST_F.
Move devlink from BINS to TEST_GEN_FILES in the Makefile since
it's invoked via the devlink.sh wrapper which sets up netdevsim.
Output:
TAP version 13
1..2
# Starting 2 tests from 1 test cases.
# RUN devlink.dump ...
# netdevsim/netdevsim1337
# OK devlink.dump
ok 1 devlink.dump
# RUN devlink.info ...
# netdevsim/netdevsim1337:
# driver: netdevsim
# running fw:
# fw.mgmt: 10.20.30
# OK devlink.info
ok 2 devlink.info
# PASSED: 2 / 2 tests passed.
# Totals: pass:2 fail:0 xfail:0 xpass:0 skip:0 error:0
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Tested-by: Donald Hunter <donald.hunter@gmail.com>
Link: https://patch.msgid.link/20260307033630.1396085-8-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Some tests need netdevsim setup which is painful to do from C.
Add ynl_nsim_lib.sh, a shared library providing nsim_setup and
nsim_cleanup functions for tests that need a netdevsim device.
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Tested-by: Donald Hunter <donald.hunter@gmail.com>
Link: https://patch.msgid.link/20260307033630.1396085-7-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Convert tc.c and tc-filter-add.c to produce KTAP output with
kselftest_harness. Merge the two tests together. They both
test TC one is testing qdisc and the other classifiers but
they can easily live in a single selftest.
Make the test spawn a new netns, and run the operations on
lo to avoid onerous setup and cleanup.
TAP version 13
1..2
# Starting 2 tests from 1 test cases.
# RUN tc.qdisc ...
# lo: fq_codel limit: 10240p target: 5ms new_flow_cnt: 0
# OK tc.qdisc
ok 1 tc.qdisc
# RUN tc.flower ...
# flower pref 1 proto: 0x8100
# flower:
# vlan_id: 100
# vlan_prio: 5
# num_of_vlans: 3
# action order: 1 vlan push id 200 protocol 0x8100 priority 0
# action order: 2 vlan push id 300 protocol 0x8100 priority 0
# OK tc.flower
ok 2 tc.flower
# PASSED: 2 / 2 tests passed.
# Totals: pass:2 fail:0 xfail:0 xpass:0 skip:0 error:0
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Tested-by: Donald Hunter <donald.hunter@gmail.com>
Link: https://patch.msgid.link/20260307033630.1396085-6-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Convert rt-link.c to use kselftest_harness.h with FIXTURE/TEST_F.
Move rt-link from BINS to TEST_GEN_PROGS.
Output:
TAP version 13
1..3
# Starting 3 tests from 1 test cases.
# RUN rt_link.dump ...
# 1: lo: mtu 65536
# 2: sit0: mtu 1480 kind sit
# OK rt_link.dump
ok 1 rt_link.dump
# RUN rt_link.netkit ...
# 4: nk1: mtu 1500 kind netkit primary 1 policy blackhole
# OK rt_link.netkit
ok 2 rt_link.netkit
# RUN rt_link.netkit_err_msg ...
# OK rt_link.netkit_err_msg
ok 3 rt_link.netkit_err_msg
# PASSED: 3 / 3 tests passed.
# Totals: pass:3 fail:0 xfail:0 xpass:0 skip:0 error:0
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Tested-by: Donald Hunter <donald.hunter@gmail.com>
Link: https://patch.msgid.link/20260307033630.1396085-5-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Convert ovs.c to produce KTAP output with kselftest_harness.
The single "crud" test creates a new OVS datapath, fetches it back
by name, then dumps all datapaths verifying the new one appears.
IIRC I added this test because ovs is a genetlink family but
has a family-specific fixed header.
TAP version 13
1..1
# Starting 1 tests from 1 test cases.
# RUN ovs.crud ...
# get:
# ynl-test(3): pid:0 cache:256
# dump:
# ynl-test(3): pid:0 cache:256
# OK ovs.crud
ok 1 ovs.crud
# PASSED: 1 / 1 tests passed.
# Totals: pass:1 fail:0 xfail:0 xpass:0 skip:0 error:0
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Tested-by: Donald Hunter <donald.hunter@gmail.com>
Link: https://patch.msgid.link/20260307033630.1396085-4-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Convert netdev.c to produce KTAP output with 3 tests:
- dev_dump: dump all netdev devices, skip if empty
- dev_get: query first device from dump by ifindex
- ntf_check: subscribe to "mgmt", create a veth via rt-link,
verify netdev notification is received, then delete the veth
Remove stdin/scanf-based UI. Add rt-link dependency for the veth
notification test.
TAP version 13
1..3
# Starting 3 tests from 1 test cases.
# RUN netdev.dump ...
# lo[1] xdp-features (0): xdp-rx-metadata-features (0): xsk-fea...
# sit0[2] xdp-features (0): xdp-rx-metadata-features (0): xsk-fea...
# OK netdev.dump
ok 1 netdev.dump
# RUN netdev.get ...
# lo[1] xdp-features (0): xdp-rx-metadata-features (0): xsk-fea...
# OK netdev.get
ok 2 netdev.get
# RUN netdev.ntf_check ...
# veth0[7] xdp-features (0): xdp-rx-metadata-features (7): timesta...
# OK netdev.ntf_check
ok 3 netdev.ntf_check
# PASSED: 3 / 3 tests passed.
# Totals: pass:3 fail:0 xfail:0 xpass:0 skip:0 error:0
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Tested-by: Donald Hunter <donald.hunter@gmail.com>
Link: https://patch.msgid.link/20260307033630.1396085-3-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The "samples" were always poor man's tests (used to manually
confirm that C YNL works).
Move all C sample programs from tools/net/ynl/samples/ to
tools/net/ynl/tests/, "merge" the Makefiles. The subsequent
changes will convert each sample into a proper KTAP selftests.
Since these are now tests rather than samples - default to
enabling asan. After all we're testing user space code here.
Sort the gitignore while at it, the page-pool entry was a leftover
so delete it.
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Tested-by: Donald Hunter <donald.hunter@gmail.com>
Link: https://patch.msgid.link/20260307033630.1396085-2-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
