The raw temperature data was never clamped to SPRD_THM_RAW_DATA_LOW or
SPRD_THM_RAW_DATA_HIGH because the return value of clamp() was not used.
Fix this by assigning the clamped value to 'rawdata'.
Casting SPRD_THM_RAW_DATA_LOW and SPRD_THM_RAW_DATA_HIGH to u32 is also
redundant and can be removed.
Fixes: 554fdbaf19 ("thermal: sprd: Add Spreadtrum thermal driver support")
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Signed-off-by: Daniel Lezcano <daniel.lezcano@kernel.org>
Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/20260307102422.306055-2-thorsten.blum@linux.dev
The temperature was never clamped to SPRD_THM_TEMP_LOW or
SPRD_THM_TEMP_HIGH because the return value of clamp() was not used. Fix
this by assigning the clamped value to 'temp'.
Casting SPRD_THM_TEMP_LOW and SPRD_THM_TEMP_HIGH to int is also
redundant and can be removed.
Fixes: 554fdbaf19 ("thermal: sprd: Add Spreadtrum thermal driver support")
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Signed-off-by: Daniel Lezcano <daniel.lezcano@kernel.org>
Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/20260307102422.306055-1-thorsten.blum@linux.dev
Temperature sensors are supposed to have the DT node name
temperature-sensors. Having multiple ones the node name alone isn't very
helpful. Add the node address to make them more distinguishable.
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Reviewed-by: Lukasz Luba <lukasz.luba@arm.com>
Link: https://patch.msgid.link/20260305163508.2643106-1-alexander.stein@ew.tq-group.com
Signed-off-by: Daniel Lezcano <daniel.lezcano@kernel.org>
DisplayPort Reduced Bit Rate uses link rate of 1.62 Gbps, the main link
clock should be 162 MHz. Having the incorrect frequency (160 MHz) in the
OPP table will result in selecting wrong link frequency. Correct the
entry in the OPP table.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260304-msm-fix-rbr-v1-1-b9eba986eaef@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Enable the secondary USB controller connected to micro usb port in OTG mode
on Monaco EVK platform.
Signed-off-by: Swati Agarwal <swati.agarwal@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260303082157.523847-4-swati.agarwal@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Enable usb-role-switch for the secondary HS USB controller on Monaco.
Additionally, add a port node with an HS endpoint so the controller can be
linked through the DT graph to the corresponding connector.
Signed-off-by: Swati Agarwal <swati.agarwal@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260303082157.523847-3-swati.agarwal@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Enable PCA9538 expander as interrupt controller on Monaco EVK and configure
the corresponding TLMM pins via pinctrl to operate as GPIO inputs with
internal pull-ups.
Signed-off-by: Swati Agarwal <swati.agarwal@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260303082157.523847-2-swati.agarwal@oss.qualcomm.com
[bjorn: Reordered nodes under &tlmm]
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Put clock pins configuration for camera master clock into the dtsi.
Reviewed-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: David Heidelberg <david@ixit.cz>
Link: https://lore.kernel.org/r/20260114-sdm845-mclk-v3-1-c9351deaf4f2@ixit.cz
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Add the PMU node for WCN6750 present on the qcm6490-idp
board and assign its power outputs to the Bluetooth module.
In WCN6750 module sw_ctrl and wifi-enable pins are handled
in the wifi controller firmware. Therefore, it is not required
to have those pins' entries in the PMU node.
Signed-off-by: Janaki Ramaiah Thota <janaki.thota@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260203071807.764036-1-janaki.thota@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Add the QCS615 domain table to the in-kernel pd-mapper so that audio
subsystems no longer rely on the userspace pd-mapper daemon.
This enables proper initialization of ADSP and CDSP domains directly
from the kernel.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Le Qi <le.qi@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260130061231.310113-1-le.qi@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
AppArmor was putting the reference to i_private data on its end after
removing the original entry from the file system. However the inode
can aand does live beyond that point and it is possible that some of
the fs call back functions will be invoked after the reference has
been put, which results in a race between freeing the data and
accessing it through the fs.
While the rawdata/loaddata is the most likely candidate to fail the
race, as it has the fewest references. If properly crafted it might be
possible to trigger a race for the other types stored in i_private.
Fix this by moving the put of i_private referenced data to the correct
place which is during inode eviction.
Fixes: c961ee5f21 ("apparmor: convert from securityfs to apparmorfs for policy ns files")
Reported-by: Qualys Security Advisory <qsa@qualys.com>
Reviewed-by: Georgia Garcia <georgia.garcia@canonical.com>
Reviewed-by: Maxime Bélair <maxime.belair@canonical.com>
Reviewed-by: Cengiz Can <cengiz.can@canonical.com>
Signed-off-by: John Johansen <john.johansen@canonical.com>
There is a race condition that leads to a use-after-free situation:
because the rawdata inodes are not refcounted, an attacker can start
open()ing one of the rawdata files, and at the same time remove the
last reference to this rawdata (by removing the corresponding profile,
for example), which frees its struct aa_loaddata; as a result, when
seq_rawdata_open() is reached, i_private is a dangling pointer and
freed memory is accessed.
The rawdata inodes weren't refcounted to avoid a circular refcount and
were supposed to be held by the profile rawdata reference. However
during profile removal there is a window where the vfs and profile
destruction race, resulting in the use after free.
Fix this by moving to a double refcount scheme. Where the profile
refcount on rawdata is used to break the circular dependency. Allowing
for freeing of the rawdata once all inode references to the rawdata
are put.
Fixes: 5d5182cae4 ("apparmor: move to per loaddata files, instead of replicating in profiles")
Reported-by: Qualys Security Advisory <qsa@qualys.com>
Reviewed-by: Georgia Garcia <georgia.garcia@canonical.com>
Reviewed-by: Maxime Bélair <maxime.belair@canonical.com>
Reviewed-by: Cengiz Can <cengiz.can@canonical.com>
Tested-by: Salvatore Bonaccorso <carnil@debian.org>
Signed-off-by: John Johansen <john.johansen@canonical.com>
Differential encoding allows loops to be created if it is abused. To
prevent this the unpack should verify that a diff-encode chain
terminates.
Unfortunately the differential encode verification had two bugs.
1. it conflated states that had gone through check and already been
marked, with states that were currently being checked and marked.
This means that loops in the current chain being verified are treated
as a chain that has already been verified.
2. the order bailout on already checked states compared current chain
check iterators j,k instead of using the outer loop iterator i.
Meaning a step backwards in states in the current chain verification
was being mistaken for moving to an already verified state.
Move to a double mark scheme where already verified states get a
different mark, than the current chain being kept. This enables us
to also drop the backwards verification check that was the cause of
the second error as any already verified state is already marked.
Fixes: 031dcc8f4e ("apparmor: dfa add support for state differential encoding")
Reported-by: Qualys Security Advisory <qsa@qualys.com>
Tested-by: Salvatore Bonaccorso <carnil@debian.org>
Reviewed-by: Georgia Garcia <georgia.garcia@canonical.com>
Reviewed-by: Cengiz Can <cengiz.can@canonical.com>
Signed-off-by: John Johansen <john.johansen@canonical.com>
An unprivileged local user can load, replace, and remove profiles by
opening the apparmorfs interfaces, via a confused deputy attack, by
passing the opened fd to a privileged process, and getting the
privileged process to write to the interface.
This does require a privileged target that can be manipulated to do
the write for the unprivileged process, but once such access is
achieved full policy management is possible and all the possible
implications that implies: removing confinement, DoS of system or
target applications by denying all execution, by-passing the
unprivileged user namespace restriction, to exploiting kernel bugs for
a local privilege escalation.
The policy management interface can not have its permissions simply
changed from 0666 to 0600 because non-root processes need to be able
to load policy to different policy namespaces.
Instead ensure the task writing the interface has privileges that
are a subset of the task that opened the interface. This is already
done via policy for confined processes, but unconfined can delegate
access to the opened fd, by-passing the usual policy check.
Fixes: b7fd2c0340 ("apparmor: add per policy ns .load, .replace, .remove interface files")
Reported-by: Qualys Security Advisory <qsa@qualys.com>
Tested-by: Salvatore Bonaccorso <carnil@debian.org>
Reviewed-by: Georgia Garcia <georgia.garcia@canonical.com>
Reviewed-by: Cengiz Can <cengiz.can@canonical.com>
Signed-off-by: John Johansen <john.johansen@canonical.com>
if ns_name is NULL after
1071 error = aa_unpack(udata, &lh, &ns_name);
and if ent->ns_name contains an ns_name in
1089 } else if (ent->ns_name) {
then ns_name is assigned the ent->ns_name
1095 ns_name = ent->ns_name;
however ent->ns_name is freed at
1262 aa_load_ent_free(ent);
and then again when freeing ns_name at
1270 kfree(ns_name);
Fix this by NULLing out ent->ns_name after it is transferred to ns_name
Fixes: 145a0ef21c ("apparmor: fix blob compression when ns is forced on a policy load
")
Reported-by: Qualys Security Advisory <qsa@qualys.com>
Tested-by: Salvatore Bonaccorso <carnil@debian.org>
Reviewed-by: Georgia Garcia <georgia.garcia@canonical.com>
Reviewed-by: Cengiz Can <cengiz.can@canonical.com>
Signed-off-by: John Johansen <john.johansen@canonical.com>
Currently the number of policy namespaces is not bounded relying on
the user namespace limit. However policy namespaces aren't strictly
tied to user namespaces and it is possible to create them and nest
them arbitrarily deep which can be used to exhaust system resource.
Hard cap policy namespaces to the same depth as user namespaces.
Fixes: c88d4c7b04 ("AppArmor: core policy routines")
Reported-by: Qualys Security Advisory <qsa@qualys.com>
Reviewed-by: Ryan Lee <ryan.lee@canonical.com>
Reviewed-by: Cengiz Can <cengiz.can@canonical.com>
Signed-off-by: John Johansen <john.johansen@canonical.com>
The profile removal code uses recursion when removing nested profiles,
which can lead to kernel stack exhaustion and system crashes.
Reproducer:
$ pf='a'; for ((i=0; i<1024; i++)); do
echo -e "profile $pf { \n }" | apparmor_parser -K -a;
pf="$pf//x";
done
$ echo -n a > /sys/kernel/security/apparmor/.remove
Replace the recursive __aa_profile_list_release() approach with an
iterative approach in __remove_profile(). The function repeatedly
finds and removes leaf profiles until the entire subtree is removed,
maintaining the same removal semantic without recursion.
Fixes: c88d4c7b04 ("AppArmor: core policy routines")
Reported-by: Qualys Security Advisory <qsa@qualys.com>
Tested-by: Salvatore Bonaccorso <carnil@debian.org>
Reviewed-by: Georgia Garcia <georgia.garcia@canonical.com>
Reviewed-by: Cengiz Can <cengiz.can@canonical.com>
Signed-off-by: Massimiliano Pellizzer <massimiliano.pellizzer@canonical.com>
Signed-off-by: John Johansen <john.johansen@canonical.com>
The function sets `*ns = NULL` on every call, leaking the namespace
string allocated in previous iterations when multiple profiles are
unpacked. This also breaks namespace consistency checking since *ns
is always NULL when the comparison is made.
Remove the incorrect assignment.
The caller (aa_unpack) initializes *ns to NULL once before the loop,
which is sufficient.
Fixes: dd51c84857 ("apparmor: provide base for multiple profiles to be replaced at once")
Reported-by: Qualys Security Advisory <qsa@qualys.com>
Tested-by: Salvatore Bonaccorso <carnil@debian.org>
Reviewed-by: Georgia Garcia <georgia.garcia@canonical.com>
Reviewed-by: Cengiz Can <cengiz.can@canonical.com>
Signed-off-by: Massimiliano Pellizzer <massimiliano.pellizzer@canonical.com>
Signed-off-by: John Johansen <john.johansen@canonical.com>
Start states are read from untrusted data and used as indexes into the
DFA state tables. The aa_dfa_next() function call in unpack_pdb() will
access dfa->tables[YYTD_ID_BASE][start], and if the start state exceeds
the number of states in the DFA, this results in an out-of-bound read.
==================================================================
BUG: KASAN: slab-out-of-bounds in aa_dfa_next+0x2a1/0x360
Read of size 4 at addr ffff88811956fb90 by task su/1097
...
Reject policies with out-of-bounds start states during unpacking
to prevent the issue.
Fixes: ad5ff3db53 ("AppArmor: Add ability to load extended policy")
Reported-by: Qualys Security Advisory <qsa@qualys.com>
Tested-by: Salvatore Bonaccorso <carnil@debian.org>
Reviewed-by: Georgia Garcia <georgia.garcia@canonical.com>
Reviewed-by: Cengiz Can <cengiz.can@canonical.com>
Signed-off-by: Massimiliano Pellizzer <massimiliano.pellizzer@canonical.com>
Signed-off-by: John Johansen <john.johansen@canonical.com>
Merge series from Maciej Strozek <mstrozek@opensource.cirrus.com>:
Introducing CS42L43B, a variant of the CS42L43 codec with changes to
PDM (DMIC) inputs, RAM/ROM memory and extra channels to two SoundWire
ports and ISRCs, and can be supported by the existing CS42L43 driver
with some modifications.
When a sound card is unbound while a PCM stream is open, a
use-after-free can occur in snd_soc_dapm_stream_event(), called from
the close_delayed_work workqueue handler.
During unbind, snd_soc_unbind_card() flushes delayed work and then
calls soc_cleanup_card_resources(). Inside cleanup,
snd_card_disconnect_sync() releases all PCM file descriptors, and
the resulting PCM close path can call snd_soc_dapm_stream_stop()
which schedules new delayed work with a pmdown_time timer delay.
Since this happens after the flush in snd_soc_unbind_card(), the
new work is not caught. soc_remove_link_components() then frees
DAPM widgets before this work fires, leading to the use-after-free.
The existing flush in soc_free_pcm_runtime() also cannot help as it
runs after soc_remove_link_components() has already freed the widgets.
Add a flush in soc_cleanup_card_resources() after
snd_card_disconnect_sync() (after which no new PCM closes can
schedule further delayed work) and before soc_remove_link_dais()
and soc_remove_link_components() (which tear down the structures the
delayed work accesses).
Fixes: e894efef9a ("ASoC: core: add support to card rebind")
Signed-off-by: Matteo Cotifava <cotifavamatteo@gmail.com>
Link: https://patch.msgid.link/20260309215412.545628-3-cotifavamatteo@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The delayed_work_pending() check before flush_delayed_work() in
soc_free_pcm_runtime() is unnecessary and racy. flush_delayed_work()
is safe to call unconditionally - it is a no-op when no work is
pending. Remove the check.
The original check was added by commit 9c9b652034 ("ASoC: core:
only flush inited work during free") but delayed_work_pending()
followed by flush_delayed_work() has a time-of-check/time-of-use
window where work can become pending between the two calls.
Fixes: 9c9b652034 ("ASoC: core: only flush inited work during free")
Signed-off-by: Matteo Cotifava <cotifavamatteo@gmail.com>
Link: https://patch.msgid.link/20260309215412.545628-2-cotifavamatteo@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Arm64 kernels are frequently built dual ACPI/DT, and then boot in ACPI
mode. In this case, there won't be an of_root, except for rare DT described
PCIe boards.
As a result, users in the common case see this high priority worrying
message, despite the machine working as expected.
Reduce this message to pr_debug() to avoid unnecessary noise.
Signed-off-by: Jeremy Linton <jeremy.linton@arm.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Link: https://patch.msgid.link/20260309045930.21531-1-jeremy.linton@arm.com
Monaco EVK has onboard eMMC, that can be used either as primary
boot storage or as secondary storage when booting from UFS.
Signed-off-by: Loic Poulain <loic.poulain@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260116214354.256878-3-loic.poulain@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Add the missing SDHC properties required to enable HS200, HS400,
and HS400 Enhanced Strobe modes, as supported by this controller.
Select the proper default pinctrls.
Signed-off-by: Loic Poulain <loic.poulain@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260116214354.256878-2-loic.poulain@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Add the TMC ETR device to store collected trace data in DDR memory.
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Jie Gan <jie.gan@oss.qualcomm.com>
Reviewed-by: Abel Vesa <abel.vesa@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260128-enable-etr-on-talos-v2-1-ba77063d6b62@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Dual LVDS output (available on the SN65DSI84) requires HSYNC_PULSE_WIDTH
and HORIZONTAL_BACK_PORCH to be divided by two with respect to the values
used for single LVDS output.
While not clearly stated in the datasheet, this is needed according to the
DSI Tuner [0] output. It also makes sense intuitively because in dual LVDS
output two pixels at a time are output and so the output clock is half of
the pixel clock.
Some dual-LVDS panels refuse to show any picture without this fix.
Divide by two HORIZONTAL_FRONT_PORCH too, even though this register is used
only for test pattern generation which is not currently implemented by this
driver.
[0] https://www.ti.com/tool/DSI-TUNER
Fixes: ceb515ba29 ("drm/bridge: ti-sn65dsi83: Add TI SN65DSI83 and SN65DSI84 driver")
Cc: stable@vger.kernel.org
Reviewed-by: Marek Vasut <marek.vasut@mailbox.org>
Link: https://patch.msgid.link/20260226-ti-sn65dsi83-dual-lvds-fixes-and-test-pattern-v1-2-2e15f5a9a6a0@bootlin.com
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
The DSI frequency must be in the range:
(CHA_DSI_CLK_RANGE * 5 MHz) <= DSI freq < ((CHA_DSI_CLK_RANGE + 1) * 5 MHz)
So the register value should point to the lower range value, but
DIV_ROUND_UP() rounds the division to the higher range value, resulting in
an excess of 1 (unless the frequency is an exact multiple of 5 MHz).
For example for a 437100000 MHz clock CHA_DSI_CLK_RANGE should be 87 (0x57):
(87 * 5 = 435) <= 437.1 < (88 * 5 = 440)
but current code returns 88 (0x58).
Fix the computation by removing the DIV_ROUND_UP().
Fixes: ceb515ba29 ("drm/bridge: ti-sn65dsi83: Add TI SN65DSI83 and SN65DSI84 driver")
Cc: stable@vger.kernel.org
Reviewed-by: Marek Vasut <marek.vasut@mailbox.org>
Link: https://patch.msgid.link/20260226-ti-sn65dsi83-dual-lvds-fixes-and-test-pattern-v1-1-2e15f5a9a6a0@bootlin.com
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
There are a couple places in the driver today that have GT loops that
only need to operate on a specific type of GT. E.g.,
for_each_gt(...) {
if (xe_gt_is_media_type(gt))
continue;
...
}
Some upcoming development is expected to utilize this pattern a bit more
widely, so add a dedicated iterator that allows looping over specific GT
type(s).
Note that this iterator uses a mask for the "type" parameter rather than
a direct value match. That's probably a bit overkill for now given that
there are only two possible types of GTs, but if additional types of GTs
ever show up in the future, this approach will fit more naturally and
allow cases where we might want to loop over a subset of the possible
types, or specifically mask off one single type.
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patch.msgid.link/20260305-gt-type-loops-v1-1-aa42e9fc3f06@intel.com
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
In preparation for delayed SNP initialization and disablement on shutdown, the
RMP will need to be cleared each time SNP is disabled. Maintain the mapping to
the RMP bookkeeping area to avoid mapping and unmapping it each time and any
possible errors that may arise from that.
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Tycho Andersen (AMD) <tycho@kernel.org>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://patch.msgid.link/20260309180053.2389118-4-tycho@kernel.org
WBINVD is required before SNP_INIT(_EX), but not before setting
MSR_AMD64_SYSCFG_SNP_EN, since the ccp driver already does its own WBINVD
before SNP_INIT (and this one would be too early for that anyway...).
Signed-off-by: Tycho Andersen (AMD) <tycho@kernel.org>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Tom Lendacky <thomas.lendacky@amd.com>
Link: https://patch.msgid.link/20260309180053.2389118-3-tycho@kernel.org
During an SNP_INIT(_EX), the SEV firmware checks that all CPUs have the SNP
syscfg bit set, and fails if they do not. As such, it does not make
sense to have offline CPUs: the firmware will fail initialization because
of the offlined ones that the kernel did not initialize.
Further, there is a bug: during SNP_INIT(_EX) the firmware requires the MFDM
syscfg bit to be set in addition to having SNP enabled, which the previous
hotplug code did not do. Since k8_check_syscfg_dram_mod_en() enforces this
be cleared, hotplug wouldn't work.
Signed-off-by: Tycho Andersen (AMD) <tycho@kernel.org>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Tom Lendacky <thomas.lendacky@amd.com>
Link: https://patch.msgid.link/20260309180053.2389118-2-tycho@kernel.org
aesbs_setkey() and aesbs_cbc_ctr_setkey() allocate struct crypto_aes_ctx
on the stack. On arm64, the kernel-mode NEON context is also stored on
the stack, causing the combined frame size to exceed 1024 bytes and
triggering -Wframe-larger-than= warnings.
Allocate struct crypto_aes_ctx on the heap instead and use
kfree_sensitive() to ensure the key material is zeroed on free.
Use a goto-based cleanup path to ensure kfree_sensitive() is always
called.
Signed-off-by: Cheng-Yang Chou <yphbchou0911@gmail.com>
Fixes: 4fa617cc68 ("arm64/fpsimd: Allocate kernel mode FP/SIMD buffers on the stack")
Link: https://lore.kernel.org/r/20260306064254.2079274-1-yphbchou0911@gmail.com
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Fix a warning for:
$ ./scripts/kconfig/merge_config.sh .config extra.config
Using .config as base
Merging extra.config
./scripts/kconfig/merge_config.sh: 384: [: false: unexpected operator
The shellcheck report is also attached:
if [ "$STRICT" == "true" ] && [ "$STRICT_MODE_VIOLATED" == "true" ]; then
^-- SC3014 (warning): In POSIX sh, == in place of = is undefined.
^-- SC3014 (warning): In POSIX sh, == in place of = is undefined.
Fixes: dfc97e1c5d ("scripts: kconfig: merge_config.sh: use awk in checks too")
Signed-off-by: Weizhao Ouyang <o451686892@gmail.com>
Reviewed-by: Mikko Rapeli <mikko.rapeli@linaro.org>
Link: https://patch.msgid.link/20260309121505.40454-1-o451686892@gmail.com
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
The makefile tries to delete a file named ".builtin-dtb.S" but the file
created by scripts/Makefile.vmlinux is actually called ".builtin-dtbs.S".
Fixes: 654102df2a ("kbuild: add generic support for built-in boot DTBs")
Cc: stable@vger.kernel.org
Signed-off-by: Charles Mirabile <cmirabil@redhat.com>
Reviewed-by: Nicolas Schier <nsc@kernel.org>
Link: https://patch.msgid.link/20260308044338.181403-1-cmirabil@redhat.com
[nathan: Small commit message adjustments]
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
pci_bus/slot_lock/unlock/trylock() largely duplicate the bus iteration loop
with variation only due to slot filter handling. The only differences in
the loops is where the struct bus is found (directly in the argument vs in
slot->bus) and whether slot filter is applied. Those differences are simple
to handle using function parameters.
Consolidate the bus iteration loop to one place by creating
__pci_bus_{lock,unlock,trylock}() and call them from the non-underscore
locking functions.
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Link: https://patch.msgid.link/20260304122139.1479-1-ilpo.jarvinen@linux.intel.com
Use the slot reset method when resetting the bridge if the bus contains
hot plug slots. This fixes spurious hot plug events that are triggered
by the secondary bus reset that bypasses the slot's detection disabling.
Resetting a bridge's subordinate bus can be done like this:
# echo 1 > /sys/bus/pci/devices/0000:50:01.0/reset_subordinate
Prior to this patch, an example kernel message may show something like:
pcieport 0000:50:01.0: pciehp: Slot(40): Link Down
With this change, the pciehp driver ignores the link event during the
reset, so may show this message instead:
pcieport 0000:50:01.0: pciehp: Slot(40): Link Down/Up ignored
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Link: https://patch.msgid.link/20260217160836.2709885-4-kbusch@meta.com
A PCIe hotplug slot applies to the entire secondary bus. Thus, pciehp only
allocates a single hotplug_slot for the bridge to that bus. The existing
PCI slot, though, would only match to functions on device 0, meaning any
devices beyond that, e.g., ARI functions, are not matched to any slot even
though they share it. A slot reset will break all the missing devices
because the handling skips them.
For example, ARI devices with more than 8 functions fail because their
state is not properly handled, nor is the attached driver notified of the
reset. In the best case, the device will appear unresponsive to the driver,
resulting in unexpected errors. A worse possibility may panic the kernel if
in-flight transactions trigger hardware reported errors like this real
observation:
vfio-pci 0000:01:00.0: resetting
vfio-pci 0000:01:00.0: reset done
{1}[Hardware Error]: Error 1, type: fatal
{1}[Hardware Error]: section_type: PCIe error
{1}[Hardware Error]: port_type: 0, PCIe end point
{1}[Hardware Error]: version: 0.2
{1}[Hardware Error]: command: 0x0140, status: 0x0010
{1}[Hardware Error]: device_id: 0000:01:01.0
{1}[Hardware Error]: slot: 0
{1}[Hardware Error]: secondary_bus: 0x00
{1}[Hardware Error]: vendor_id: 0x1d9b, device_id: 0x0207
{1}[Hardware Error]: class_code: 020000
{1}[Hardware Error]: bridge: secondary_status: 0x0000, control: 0x0000
{1}[Hardware Error]: aer_cor_status: 0x00008000, aer_cor_mask: 0x00002000
{1}[Hardware Error]: aer_uncor_status: 0x00010000, aer_uncor_mask: 0x00100000
{1}[Hardware Error]: aer_uncor_severity: 0x006f6030
{1}[Hardware Error]: TLP Header: 0a412800 00192080 60000004 00000004
GHES: Fatal hardware error but panic disabled
Kernel panic - not syncing: GHES: Fatal hardware error
Allow a slot to be created to claim all devices on a bus, not just a
matching device. This is done by introducing a sentinel value, named
PCI_SLOT_ALL_DEVICES, which then has the PCI slot match to any device on
the bus. This fixes slot resets for pciehp.
Since 0xff already has special meaning, the chosen value for this new
feature is 0xfe. This will not clash with any actual slot number since they
are limited to 5 bits.
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Link: https://patch.msgid.link/20260217160836.2709885-3-kbusch@meta.com
Replace the next_block variable that is in units of file system blocks
and incorrectly uses the sector_t type with a byte offset, as that is
what both users want.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20260302141922.370070-15-hch@lst.de
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
While the pblk argument to fscrypt_zeroout_range is declared as a
sector_t, it actually is interpreted as a logical block size unit, which
is highly unusual. Switch to passing the 512 byte units that sector_t is
defined for.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20260302141922.370070-14-hch@lst.de
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Range lengths are usually expressed as bytes in the VFS, switch
fscrypt_zeroout_range to this convention.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20260302141922.370070-13-hch@lst.de
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Logical offsets into an inode are usually expressed as bytes in the VFS.
Switch fscrypt_zeroout_range to that convention.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20260302141922.370070-12-hch@lst.de
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Range lengths are usually expressed as bytes in the VFS, switch
fscrypt_zeroout_range_inline_crypt to this convention.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20260302141922.370070-11-hch@lst.de
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Logical offsets into an inode are usually expressed as bytes in the VFS.
Switch fscrypt_zeroout_range_inline_crypt to that convention.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20260302141922.370070-10-hch@lst.de
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Logical offsets into an inode are usually expressed as bytes in the VFS.
Switch fscrypt_set_bio_crypt_ctx to that convention.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20260302141922.370070-9-hch@lst.de
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
