[ Upstream commit 2df8b310bc ]
The origin bio carries blk-cgroup information which could be set from
foreground(task_css(css) - wbc->wb->blkcg_css), so the blkcg won't
control buffer io since commit ca522482e3 ("dm: pass NULL bdev to
bio_alloc_clone"). The synchronous io is still under control by blkcg,
because 'bio->bi_blkg' is set by io submitting task which has been added
into 'cgroup.procs'.
Fix it by using bio_clone_blkg_association when submitting a cloned bio.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=220985
Fixes: ca522482e3 ("dm: pass NULL bdev to bio_alloc_clone")
Reported-by: Zhihao Cheng <chengzhihao1@huawei.com>
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Tested-by: Zhihao Cheng <chengzhihao1@huawei.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c1e4f1dccb ]
When tearing down a context entry, the current implementation zeros the
entire 128-bit entry using multiple 64-bit writes. This creates a window
where the hardware can fetch a "torn" entry — where some fields are
already zeroed while the 'Present' bit is still set — leading to
unpredictable behavior or spurious faults.
While x86 provides strong write ordering, the compiler may reorder writes
to the two 64-bit halves of the context entry. Even without compiler
reordering, the hardware fetch is not guaranteed to be atomic with
respect to multiple CPU writes.
Align with the "Guidance to Software for Invalidations" in the VT-d spec
(Section 6.5.3.3) by implementing the recommended ownership handshake:
1. Clear only the 'Present' (P) bit of the context entry first to
signal the transition of ownership from hardware to software.
2. Use dma_wmb() to ensure the cleared bit is visible to the IOMMU.
3. Perform the required cache and context-cache invalidation to ensure
hardware no longer has cached references to the entry.
4. Fully zero out the entry only after the invalidation is complete.
Also, add a dma_wmb() to context_set_present() to ensure the entry
is fully initialized before the 'Present' bit becomes visible.
Fixes: ba39592764 ("Intel IOMMU: Intel IOMMU driver")
Reported-by: Dmytro Maluka <dmaluka@chromium.org>
Closes: https://lore.kernel.org/all/aTG7gc7I5wExai3S@google.com/
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Dmytro Maluka <dmaluka@chromium.org>
Reviewed-by: Samiullah Khawaja <skhawaja@google.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Link: https://lore.kernel.org/r/20260120061816.2132558-3-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 75ed00055c ]
The Intel VT-d Scalable Mode PASID table entry consists of 512 bits (64
bytes). When tearing down an entry, the current implementation zeros the
entire 64-byte structure immediately using multiple 64-bit writes.
Since the IOMMU hardware may fetch these 64 bytes using multiple
internal transactions (e.g., four 128-bit bursts), updating or zeroing
the entire entry while it is active (P=1) risks a "torn" read. If a
hardware fetch occurs simultaneously with the CPU zeroing the entry, the
hardware could observe an inconsistent state, leading to unpredictable
behavior or spurious faults.
Follow the "Guidance to Software for Invalidations" in the VT-d spec
(Section 6.5.3.3) by implementing the recommended ownership handshake:
1. Clear only the 'Present' (P) bit of the PASID entry.
2. Use a dma_wmb() to ensure the cleared bit is visible to hardware
before proceeding.
3. Execute the required invalidation sequence (PASID cache, IOTLB, and
Device-TLB flush) to ensure the hardware has released all cached
references.
4. Only after the flushes are complete, zero out the remaining fields
of the PASID entry.
Also, add a dma_wmb() in pasid_set_present() to ensure that all other
fields of the PASID entry are visible to the hardware before the Present
bit is set.
Fixes: 0bbeb01a4f ("iommu/vt-d: Manage scalalble mode PASID tables")
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Dmytro Maluka <dmaluka@chromium.org>
Reviewed-by: Samiullah Khawaja <skhawaja@google.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Link: https://lore.kernel.org/r/20260120061816.2132558-2-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 22d169bdd2 ]
When writing the address of a freshly allocated zero-initialized PASID
table to a PASID directory entry, do that after the CPU cache flush for
this PASID table, not before it, to avoid the time window when this
PASID table may be already used by non-coherent IOMMU hardware while
its contents in RAM is still some random old data, not zero-initialized.
Fixes: 194b3348bd ("iommu/vt-d: Fix PASID directory pointer coherency")
Signed-off-by: Dmytro Maluka <dmaluka@chromium.org>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Link: https://lore.kernel.org/r/20251221123508.37495-1-dmaluka@chromium.org
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6070a44051 ]
In __print_txpwr_map(), memory is allocated to bufp via vzalloc().
If max_valid_addr is 0, the function returns -EOPNOTSUPP immediately
without freeing bufp, leading to a memory leak.
Since the validation of max_valid_addr does not depend on the allocated
memory, fix this by moving the vzalloc() call after the check.
Compile tested only. Issue found using a prototype static analysis tool
and code review.
Fixes: 036042e157 ("wifi: rtw89: debug: txpwr table supports Wi-Fi 7 chips")
Suggested-by: Zong-Zhe Yang <kevin_yang@realtek.com>
Signed-off-by: Zilin Guan <zilin@seu.edu.cn>
Reviewed-by: Zong-Zhe Yang <kevin_yang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20260116130834.1413924-1-zilin@seu.edu.cn
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 959ac08a2c ]
Per PCIe r7.0, sec 2.2.6.2.1 and 7.5.3.4, a Requester may not use 8-bit Tags
unless its Extended Tag Field Enable is set, but all Receivers/Completers
must handle 8-bit Tags correctly regardless of their Extended Tag Field
Enable.
Some devices do not handle 8-bit Tags as Completers, so add a quirk for
them. If we find such a device, we disable Extended Tags for the entire
hierarchy to make peer-to-peer DMA possible.
The 3ware 9650SA seems to have issues with handling 8-bit tags. Mark it as
broken.
This fixes PCI Parity Errors like :
3w-9xxx: scsi0: ERROR: (0x06:0x000C): PCI Parity Error: clearing.
3w-9xxx: scsi0: ERROR: (0x06:0x000D): PCI Abort: clearing.
3w-9xxx: scsi0: ERROR: (0x06:0x000E): Controller Queue Error: clearing.
3w-9xxx: scsi0: ERROR: (0x06:0x0010): Microcontroller Error: clearing.
Fixes: 60db3a4d8c ("PCI: Enable PCIe Extended Tags if supported")
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=202425
Signed-off-by: Jörg Wedekind <joerg@wedekind.de>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Link: https://patch.msgid.link/20260119143114.21948-1-joerg@wedekind.de
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e8a1e7eaa1 ]
__sprint_symbol() might access an invalid pointer when
kallsyms_lookup_buildid() returns a symbol found by
ftrace_mod_address_lookup().
The ftrace lookup function must set both @modname and @modbuildid the same
way as module_address_lookup().
Link: https://lkml.kernel.org/r/20251128135920.217303-7-pmladek@suse.com
Fixes: 9294523e37 ("module: add printk formats to add module build ID to stacktraces")
Signed-off-by: Petr Mladek <pmladek@suse.com>
Reviewed-by: Aaron Tomlin <atomlin@atomlin.com>
Acked-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Daniel Borkman <daniel@iogearbox.net>
Cc: Daniel Gomez <da.gomez@samsung.com>
Cc: John Fastabend <john.fastabend@gmail.com>
Cc: Kees Cook <kees@kernel.org>
Cc: Luis Chamberalin <mcgrof@kernel.org>
Cc: Marc Rutland <mark.rutland@arm.com>
Cc: "Masami Hiramatsu (Google)" <mhiramat@kernel.org>
Cc: Petr Pavlu <petr.pavlu@suse.com>
Cc: Sami Tolvanen <samitolvanen@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit acfdbb4ab2 ]
Add a helper function for reading the optional "build_id" member of struct
module. It is going to be used also in ftrace_mod_address_lookup().
Use "#ifdef" instead of "#if IS_ENABLED()" to match the declaration of the
optional field in struct module.
Link: https://lkml.kernel.org/r/20251128135920.217303-4-pmladek@suse.com
Signed-off-by: Petr Mladek <pmladek@suse.com>
Reviewed-by: Daniel Gomez <da.gomez@samsung.com>
Reviewed-by: Petr Pavlu <petr.pavlu@suse.com>
Cc: Aaron Tomlin <atomlin@atomlin.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Daniel Borkman <daniel@iogearbox.net>
Cc: John Fastabend <john.fastabend@gmail.com>
Cc: Kees Cook <kees@kernel.org>
Cc: Luis Chamberalin <mcgrof@kernel.org>
Cc: Marc Rutland <mark.rutland@arm.com>
Cc: "Masami Hiramatsu (Google)" <mhiramat@kernel.org>
Cc: Sami Tolvanen <samitolvanen@google.com>
Cc: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Stable-dep-of: e8a1e7eaa1 ("kallsyms/ftrace: set module buildid in ftrace_mod_address_lookup()")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit cd6735896d ]
bpf_address_lookup() has been used only in kallsyms_lookup_buildid(). It
was supposed to set @modname and @modbuildid when the symbol was in a
module.
But it always just cleared @modname because BPF symbols were never in a
module. And it did not clear @modbuildid because the pointer was not
passed.
The wrapper is no longer needed. Both @modname and @modbuildid are now
always initialized to NULL in kallsyms_lookup_buildid().
Remove the wrapper and rename __bpf_address_lookup() to
bpf_address_lookup() because this variant is used everywhere.
[akpm@linux-foundation.org: fix loongarch]
Link: https://lkml.kernel.org/r/20251128135920.217303-6-pmladek@suse.com
Fixes: 9294523e37 ("module: add printk formats to add module build ID to stacktraces")
Signed-off-by: Petr Mladek <pmladek@suse.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Cc: Aaron Tomlin <atomlin@atomlin.com>
Cc: Daniel Borkman <daniel@iogearbox.net>
Cc: Daniel Gomez <da.gomez@samsung.com>
Cc: John Fastabend <john.fastabend@gmail.com>
Cc: Kees Cook <kees@kernel.org>
Cc: Luis Chamberalin <mcgrof@kernel.org>
Cc: Marc Rutland <mark.rutland@arm.com>
Cc: "Masami Hiramatsu (Google)" <mhiramat@kernel.org>
Cc: Petr Pavlu <petr.pavlu@suse.com>
Cc: Sami Tolvanen <samitolvanen@google.com>
Cc: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit de8a70cefc ]
Since commit be102eb6a0 ("netfilter: nf_conncount: rework API to use
sk_buff directly"), we skip the adding and trigger a GC when the ct is
confirmed. For connections originated from local to local it doesn't
work because the connection is confirmed on POSTROUTING, therefore
tracking on the INPUT hook is always skipped.
In order to fix this, we check whether skb input ifindex is set to
loopback ifindex. If it is then we fallback on a GC plus track operation
skipping the optimization. This fallback is necessary to avoid
duplicated tracking of a packet train e.g 10 UDP datagrams sent on a
burst when initiating the connection.
Tested with xt_connlimit/nft_connlimit and OVS limit and with a HTTP
server and iperf3 on UDP mode.
Fixes: be102eb6a0 ("netfilter: nf_conncount: rework API to use sk_buff directly")
Reported-by: Michal Slabihoudek <michal.slabihoudek@gooddata.com>
Closes: https://lore.kernel.org/netfilter/6989BD9F-8C24-4397-9AD7-4613B28BF0DB@gooddata.com/
Signed-off-by: Fernando Fernandez Mancera <fmancera@suse.de>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit cda26c6459 ]
As far as I can see nothing bad can happen when NFTA_TARGET/MATCH_NAME
are too large because this calls x_tables helpers which check for the
length, but it seems better to already reject it during netlink parsing.
Rest of the changes avoid silent u8/u16 truncations.
For _TYPE, its expected to be only 1 or 0. In x_tables world, this
variable is set by kernel, for IPT_SO_GET_REVISION_TARGET its 1, for
all others its set to 0.
As older versions of nf_tables permitted any value except 1 to mean 'match',
keep this as-is but sanitize the value for consistency.
Fixes: 0ca743a559 ("netfilter: nf_tables: add compatibility layer for x_tables")
Reviewed-by: Fernando Fernandez Mancera <fmancera@suse.de>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 21d033e472 ]
After the optimization to only perform one GC per jiffy, a new problem
was introduced. If more than 8 new connections are tracked per jiffy the
list won't be cleaned up fast enough possibly reaching the limit
wrongly.
In order to prevent this issue, only skip the GC if it was already
triggered during the same jiffy and the increment is lower than the
clean up limit. In addition, increase the clean up limit to 64
connections to avoid triggering GC too often and do more effective GCs.
This has been tested using a HTTP server and several
performance tools while having nft_connlimit/xt_connlimit or OVS limit
configured.
Output of slowhttptest + OVS limit at 52000 connections:
slow HTTP test status on 340th second:
initializing: 0
pending: 432
connected: 51998
error: 0
closed: 0
service available: YES
Fixes: d265929930 ("netfilter: nf_conncount: reduce unnecessary GC")
Reported-by: Aleksandra Rukomoinikova <ARukomoinikova@k2.cloud>
Closes: https://lore.kernel.org/netfilter/b2064e7b-0776-4e14-adb6-c68080987471@k2.cloud/
Signed-off-by: Fernando Fernandez Mancera <fmancera@suse.de>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c0362b5748 ]
For convenience when performing GC over the connection list, make
nf_conncount_gc_list() to disable BH. This unifies the behavior with
nf_conncount_add() and nf_conncount_count().
Signed-off-by: Fernando Fernandez Mancera <fmancera@suse.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Stable-dep-of: 21d033e472 ("netfilter: nf_conncount: increase the connection clean up limit to 64")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6f93616a73 ]
If a transaction fails the final validation in the commit hook, the table
validation state is changed to NFT_VALIDATE_DO and a replay of the batch is
performed. Every rule insert will then do a graph validation.
This is much slower, but provides better error reporting to the user
because we can point at the rule that introduces the validation issue.
Without this reset the affected table(s) remain in full validation mode,
i.e. on next transaction we start with slow-mode.
This makes the next transaction after a failed incremental update very slow:
# time iptables-restore < /tmp/ruleset
real 0m0.496s [..]
# time iptables -A CALLEE -j CALLER
iptables v1.8.11 (nf_tables): RULE_APPEND failed (Too many links): rule in chain CALLEE
real 0m0.022s [..]
# time iptables-restore < /tmp/ruleset
real 1m22.355s [..]
After this patch, 2nd iptables-restore is back to ~0.5s.
Fixes: 9a32e98506 ("netfilter: nf_tables: don't write table validation state without mutex")
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 491f2927ae ]
s_fc_lock can be acquired from inode eviction and thus is
reclaim unsafe. Since the fast commit path holds s_fc_lock while writing
the commit log, allocations under the lock can enter reclaim and invert
the lock order with fs_reclaim. Add ext4_fc_lock()/ext4_fc_unlock()
helpers which acquire s_fc_lock under memalloc_nofs_save()/restore()
context and use them everywhere so allocations under the lock cannot
recurse into filesystem reclaim.
Fixes: 6593714d67 ("ext4: hold s_fc_lock while during fast commit")
Signed-off-by: Li Chen <me@linux.beauty>
Reviewed-by: Baokun Li <libaokun1@huawei.com>
Reviewed-by: Zhang Yi <yi.zhang@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://patch.msgid.link/20260106120621.440126-1-me@linux.beauty
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e1696c8bd0 ]
Seems that there is an assumption that this function should be called
only for netdev interfaces, but it can also be called in suspend, or
from nl80211_netlink_notify (indirectly).
Note that the documentation of NL80211_ATTR_SOCKET_OWNER explicitly
says that NAN interfaces would be destroyed as well in the
nl80211_netlink_notify case.
Fix this by also stopping P2P and NAN.
Fixes: cb3b7d8765 ("cfg80211: add start / stop NAN commands")
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20260107140430.dab142cbef0b.I290cc47836d56dd7e35012ce06bec36c6da688cd@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2a14e91b6d ]
Set a 0xff value for i2c reads of an mctp-i2c device. Otherwise reads
will return "val" from the i2c bus driver. For i2c-aspeed and
i2c-npcm7xx that is a stack uninitialised u8.
Tested with "i2ctransfer -y 1 r10@0x34" where 0x34 is a mctp-i2c
instance, now it returns all 0xff.
Fixes: f5b8abf9fc ("mctp i2c: MCTP I2C binding driver")
Signed-off-by: Matt Johnston <matt@codeconstruct.com.au>
Link: https://patch.msgid.link/20260113-mctp-read-fix-v1-1-70c4b59c741c@codeconstruct.com.au
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ae4744e173 ]
The MCTP I2C slave callback did not handle I2C_SLAVE_READ_REQUESTED
events. As a result, i2c read event will trigger repeated reception of
old data, reset rx_pos when a read request is received.
Signed-off-by: Jian Zhang <zhangjian.3032@bytedance.com>
Link: https://patch.msgid.link/20260108101829.1140448-1-zhangjian.3032@bytedance.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Stable-dep-of: 2a14e91b6d ("mctp i2c: initialise event handler read bytes")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 77449e453d ]
When a filesystem is frozen, quotactl_block() enters a retry loop
waiting for the filesystem to thaw. It acquires s_umount, checks the
freeze state, drops s_umount and uses sb_start_write() - sb_end_write()
pair to wait for the unfreeze.
However, this retry loop can trigger a livelock issue, specifically on
kernels with preemption disabled.
The mechanism is as follows:
1. freeze_super() sets SB_FREEZE_WRITE and calls sb_wait_write().
2. sb_wait_write() calls percpu_down_write(), which initiates
synchronize_rcu().
3. Simultaneously, quotactl_block() spins in its retry loop, immediately
executing the sb_start_write() - sb_end_write() pair.
4. Because the kernel is non-preemptible and the loop contains no
scheduling points, quotactl_block() never yields the CPU. This
prevents that CPU from reaching an RCU quiescent state.
5. synchronize_rcu() in the freezer thread waits indefinitely for the
quotactl_block() CPU to report a quiescent state.
6. quotactl_block() spins indefinitely waiting for the freezer to
advance, which it cannot do as it is blocked on the RCU sync.
This results in a hang of the freezer process and 100% CPU usage by the
quota process.
While this can occur intermittently on multi-core systems, it is
reliably reproducing on a node with the following script, running both
the freezer and the quota toggle on the same CPU:
# mkfs.ext4 -O quota /dev/sda 2g && mkdir a_mount
# mount /dev/sda -o quota,usrquota,grpquota a_mount
# taskset -c 3 bash -c "while true; do xfs_freeze -f a_mount; \
xfs_freeze -u a_mount; done" &
# taskset -c 3 bash -c "while true; do quotaon a_mount; \
quotaoff a_mount; done" &
Adding cond_resched() to the retry loop fixes the issue. It acts as an
RCU quiescent state, allowing synchronize_rcu() in percpu_down_write()
to complete.
Fixes: 576215cffd ("fs: Drop wait_unfrozen wait queue")
Signed-off-by: Abhishek Bapat <abhishekbapat@google.com>
Link: https://patch.msgid.link/20260115213103.1089129-1-abhishekbapat@google.com
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e62102ac9b ]
In case of multi-link connection, WCN7850 firmware crashes due to WoW
offloads enabled on both primary and secondary links.
Change to do it only on primary link to fix it.
Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.1.c5-00284-QCAHMTSWPL_V1.0_V2.0_SILICONZ-1
Fixes: 32f7b19668 ("wifi: ath12k: support MLO as well if single_chip_mlo_support flag is set")
Signed-off-by: Baochen Qiang <baochen.qiang@oss.qualcomm.com>
Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com>
Link: https://patch.msgid.link/20251103-ath12-primary-link-wow-v1-1-3cf523dc09f0@oss.qualcomm.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 83014d82a1 ]
When mapping a p2pdma page the page reference count is initialised to 1
prior to calling vm_insert_page(). This is to avoid vm_insert_page()
warning if the page refcount is zero. Prior to setting the page count there
is a check to ensure the page is currently free (ie. has a zero reference
count).
However vm_insert_page() can fail. In this case the pages are freed back to
the genalloc pool, but that does not reset the page refcount. So a future
allocation of the same page will see the elevated page refcount from the
previous set_page_count() call triggering the VM_WARN_ON_ONCE_PAGE checking
that the page is free.
Fix this by resetting the page refcount to zero using set_page_count().
Note that put_page() is not used because that would result in freeing the
page twice due to implicitly calling p2pdma_folio_free().
Fixes: b7e2823787 ("mm/mm_init: move p2pdma page refcount initialisation to p2pdma")
Signed-off-by: Alistair Popple <apopple@nvidia.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Logan Gunthorpe <logang@deltatee.com>
Acked-by: Balbir Singh <balbirs@nvidia.com>
Link: https://patch.msgid.link/20260112005440.998543-1-apopple@nvidia.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 62171369cf ]
In pcie_ptm_create_debugfs(), if devm_kasprintf() fails after successfully
allocating ptm_debugfs with kzalloc(), the function returns without freeing
the allocated memory, resulting in a memory leak.
Free ptm_debugfs before returning in the devm_kasprintf() error path and in
pcie_ptm_destroy_debugfs().
Fixes: 132833405e ("PCI: Add debugfs support for exposing PTM context")
Signed-off-by: Aadityarangan Shridhar Iyengar <adiyenga@cisco.com>
[bhelgaas: squash additional fix from Mani:
https://lore.kernel.org/r/pdp4xc4d5ee3e547mmdro5riui3mclduqdl7j6iclfbozo2a4c@7m3qdm6yrhuv]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Manivannan Sadhasivam <mani@kernel.org>
Link: https://patch.msgid.link/20260111163650.33168-1-adiyenga@cisco.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e9f5a55b70 ]
The functon dm_blk_report_zones reads md->zone_revalidate_map, however it
may change while the function is running. Use READ_ONCE.
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Fixes: 37f53a2c60 ("dm: fix dm_blk_report_zones")
Reviewed-by: Benjamin Marzinski <bmarzins@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 24c405fdbe ]
The function dm_blk_report_zones tests if the device is suspended with
the "dm_suspended_md" call. However, this function is called without
holding any locks, so the device may be suspended just after it.
Move the call to dm_suspended_md after dm_get_live_table, so that the
device can't be suspended after the suspended state was tested.
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Fixes: 37f53a2c60 ("dm: fix dm_blk_report_zones")
Reviewed-by: Benjamin Marzinski <bmarzins@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 01464a3fdf ]
pcie_port_probe_service() unconditionally calls get_device() (unless it
fails). So drop that reference also unconditionally as it's fine for a
PCIe driver to not have a remove callback.
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Link: https://patch.msgid.link/e1c68c3b3f1af8427e98ca5e2c79f8bf0ebe2ce4.1764688034.git.u.kleine-koenig@baylibre.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 613f3255a3 ]
Sophgo 2044 Root Ports advertise L0 and L1 capabilities without supporting
them. Since commit f3ac2ff148 ("PCI/ASPM: Enable all ClockPM and ASPM
states for devicetree platforms") force enabled ASPM on all device tree
platforms, the issue became evident and the SG2044 Root Port started
breaking.
Hence, disable the L0s and L1 capabilities in the LINKCAP register for the
SG2044 Root Ports, so that these states won't get enabled.
Fixes: 467d9c0348 ("PCI: dwc: Add Sophgo SG2044 PCIe controller driver in Root Complex mode")
Signed-off-by: Inochi Amaoto <inochiama@gmail.com>
[mani: reworded description and corrected fixes tag]
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Tested-by: Han Gao <gaohan@iscas.ac.cn>
Link: https://patch.msgid.link/20260109040756.731169-1-inochiama@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 73711730a1 ]
The bit for enabling extended tags is Reserved and Preserved (RsvdP) for
VFs, according to PCIe r7.0 section 7.5.3.4 table 7.21. Hence, bail out
early from pci_configure_extended_tags() if the device is a VF.
Otherwise, we may see incorrect log messages such as:
kernel: pci 0000:af:00.2: enabling Extended Tags
(af:00.2 is a VF)
Fixes: 60db3a4d8c ("PCI: Enable PCIe Extended Tags if supported")
Signed-off-by: Håkon Bugge <haakon.bugge@oracle.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Zhu Yanjun <yanjun.zhu@linux.dev>
Link: https://patch.msgid.link/20251112095442.1913258-1-haakon.bugge@oracle.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit cb500023a7 ]
Commit b7e2823787 has already changed the initial page refcount of
p2pdma page from one to zero, however, in p2pmem_alloc_mmap() it uses
"VM_WARN_ON_ONCE_PAGE(!page_ref_count(page))" to assert the initial page
refcount should not be zero and the following will be reported when
CONFIG_DEBUG_VM is enabled:
page: refcount:0 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x380400000
flags: 0x20000000002000(reserved|node=0|zone=4)
raw: 0020000000002000 ff1100015e3ab440 0000000000000000 0000000000000000
raw: 0000000000000000 0000000000000000 00000000ffffffff 0000000000000000
page dumped because: VM_WARN_ON_ONCE_PAGE(!page_ref_count(page))
------------[ cut here ]------------
WARNING: CPU: 5 PID: 449 at drivers/pci/p2pdma.c:240 p2pmem_alloc_mmap+0x83a/0xa60
Fix by using "page_ref_count(page)" as the assertion condition.
Fixes: b7e2823787 ("mm/mm_init: move p2pdma page refcount initialisation to p2pdma")
Signed-off-by: Hou Tao <houtao1@huawei.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Logan Gunthorpe <logang@deltatee.com>
Reviewed-by: Alistair Popple <apopple@nvidia.com>
Link: https://patch.msgid.link/20251220040446.274991-3-houtao@huaweicloud.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6220694c52 ]
When vm_insert_page() fails in p2pmem_alloc_mmap(), p2pmem_alloc_mmap()
doesn't invoke percpu_ref_put() to free the per-CPU ref of pgmap acquired
after gen_pool_alloc_owner(), and memunmap_pages() will hang forever when
trying to remove the PCI device.
Fix it by adding the missed percpu_ref_put().
Fixes: 7e9c7ef83d ("PCI/P2PDMA: Allow userspace VMA allocations through sysfs")
Signed-off-by: Hou Tao <houtao1@huawei.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Logan Gunthorpe <logang@deltatee.com>
Reviewed-by: Alistair Popple <apopple@nvidia.com>
Link: https://patch.msgid.link/20251220040446.274991-2-houtao@huaweicloud.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4073ea5161 ]
Userspace may fail to connect to certain BSS that were initially
marked as unusable due to regulatory restrictions (use_for = 0,
e.g., 6 GHz power type mismatch). Even after these restrictions
are removed and the BSS becomes usable, connection attempts still
fail.
The issue occurs in cfg80211_update_known_bss() where the use_for
flag is updated using bitwise AND (&=) instead of direct assignment.
Once a BSS is marked with use_for = 0, the AND operation masks out
any subsequent non-zero values, permanently keeping the flag at 0.
This causes __cfg80211_get_bss(), invoked by nl80211_assoc_bss(), to
fail the check "(bss->pub.use_for & use_for) != use_for", thereby
blocking association.
Replace the bitwise AND operation with direct assignment so the use_for
flag accurately reflects the current BSS state.
Fixes: d02a12b8e4 ("wifi: cfg80211: add BSS usage reporting")
Signed-off-by: Huang Chenming <chenming.huang@oss.qualcomm.com>
Link: https://patch.msgid.link/20251209025733.2098456-1-chenming.huang@oss.qualcomm.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4d98208450 ]
When transitioning to D3cold, __pci_set_power_state() first transitions to
D3hot. If the device was already in D3hot, this adds excess work:
(a) read/modify/write PMCSR; and
(b) excess delay (pci_dev_d3_sleep()).
For (b), we already performed the necessary delay on the previous D3hot
entry; this was extra noticeable when evaluating runtime PM transition
latency.
Check whether we're already in the target state before continuing.
Note that __pci_set_power_state() already does this same check for other
state transitions, but D3cold is special because __pci_set_power_state()
converts it to D3hot for the purposes of PMCSR.
This seems to be an oversight in commit 0aacdc9574 ("PCI/PM: Clean up
pci_set_low_power_state()").
Fixes: 0aacdc9574 ("PCI/PM: Clean up pci_set_low_power_state()")
Signed-off-by: Brian Norris <briannorris@google.com>
Signed-off-by: Brian Norris <briannorris@chromium.org>
[bhelgaas: reverse test to match other "dev->current_state == state" cases]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Link: https://patch.msgid.link/20251003154008.1.I7a21c240b30062c66471329567a96dceb6274358@changeid
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ad0c6da5be ]
Fix copy & paste errors by changing the references from 'ntb' to 'vntb'.
Fixes: 4ac8c8e52c ("Documentation: PCI: Add specification for the PCI vNTB function device")
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
[mani: squashed the patches and fixed more errors]
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/b51c2a69ffdbfa2c359f5cf33f3ad2acc3db87e4.1762154911.git.baruch@tkos.co.il
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f42b3c053b ]
In xilinx_pcie_init_irq_domain(), if xilinx_allocate_msi_domains() fails
after pcie->leg_domain has been successfully created via
irq_domain_create_linear(), the function returns directly without cleaning
up the allocated IRQ domain, resulting in a resource leak. In
xilinx_free_msi_domains(), pcie->leg_domain is also neglected.
Add irq_domain_remove() call in the error path to properly release the
IRQ domain before returning the error. Also rename
xilinx_free_msi_domains() to xilinx_free_irq_domains() and add the release
of pcie->leg_domain to it.
Fixes: 313b64c3ae ("PCI: xilinx: Convert to MSI domains")
Suggested-by: Manivannan Sadhasivam <mani@kernel.org>
Signed-off-by: Haotian Zhang <vulab@iscas.ac.cn>
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Link: https://patch.msgid.link/20251219021615.965-1-vulab@iscas.ac.cn
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7f0cdcddf8 ]
In mtk_pcie_init_irq_domain(), if mtk_pcie_allocate_msi_domains()
fails after port->irq_domain has been successfully created via
irq_domain_create_linear(), the function returns directly without
cleaning up the allocated IRQ domain, resulting in a resource leak.
Add irq_domain_remove() call in the error path to properly release the
INTx IRQ domain before returning the error.
Fixes: 43e6409db6 ("PCI: mediatek: Add MSI support for MT2712 and MT7622")
Signed-off-by: Haotian Zhang <vulab@iscas.ac.cn>
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Link: https://patch.msgid.link/20251119023308.476-1-vulab@iscas.ac.cn
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9e33c1dba2 ]
When MPQ8785 reports VOUT_MODE as VID mode, mpq8785_identify()
configures the driver for direct mode. The subsequent
pmbus_identify_common() check then fails due to a mismatch
between the reported mode and the configured mode, causing
device initialization to fail.
Override the reported VOUT_MODE to direct mode to keep the
driver configuration consistent with the reported mode and
allow successful device initialization.
This does not change how voltages are interpreted, but avoids
a false identification failure caused by mismatched mode
handling.
Fixes: f20b4a9311 ("hwmon: Add driver for MPS MPQ8785 Synchronous Step-Down Converter")
Signed-off-by: Carl Lee <carl.lee@amd.com>
Link: https://lore.kernel.org/r/20260210-dt-bindings-hwmon-pmbus-mpq8785-add-mpq8786-support-v3-1-84636ccfe76f@amd.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8bde3e395a ]
This reverts commit 6946c726c3.
Jean Delvare points out that the patch does not completely
fix the reported problem, that it in fact introduces a
(new) race condition, and that it may actually not be needed in
the first place.
Various AI reviews agree. Specific and relevant AI feedback:
"
This reordering sets the driver data to NULL before removing the sensor
attributes in the loop below.
ibmpex_show_sensor() retrieves this driver data via dev_get_drvdata() but
does not check if it is NULL before dereferencing it to access
data->sensors[].
If a userspace process reads a sensor file (like temp1_input) while this
delete function is running, could it race with the dev_set_drvdata(...,
NULL) call here and crash in ibmpex_show_sensor()?
Would it be safer to keep the original order where device_remove_file() is
called before clearing the driver data? device_remove_file() should wait
for any active sysfs callbacks to complete, which might already prevent the
use-after-free this patch intends to fix.
"
Revert the offending patch. If it can be shown that the originally reported
alleged race condition does indeed exist, it can always be re-introduced
with a complete fix.
Reported-by: Jean Delvare <jdelvare@suse.de>
Closes: https://lore.kernel.org/linux-hwmon/20260121095342.73e723cb@endymion/
Cc: Jean Delvare <jdelvare@suse.de>
Cc: Junrui Luo <moonafterrain@outlook.com>
Fixes: 6946c726c3 ("hwmon: (ibmpex) fix use-after-free in high/low store")
Reviewed-by: Jean Delvare <jdelvare@suse.de>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5af56f30c4 ]
The Makefile for the SPI tools creates an include/linux/spi folder and some
symlinks inside it. After running `make -C spi/tools`, this folder shows up
as untracked in the git status.
Add the above folder to the .gitignore file.
Fixes: f325b73dc4 ("spi: tools: move to tools buildsystem")
Signed-off-by: Francesco Lavra <flavra@baylibre.com>
Link: https://patch.msgid.link/20260209095001.556495-1-flavra@baylibre.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9fad74b79e ]
There are very few volatile controls in SDCA that are exported
as ALSA controls, typically Detected Mode is the only common
one. However, the current code does not resume the device when
these ALSA controls are accessed, which will result in the
read/write failing.
Add a new wrapper specifically for volatile controls that will do
the required pm_runtime operations before accessing the register.
Fixes: c3ca24e3fc ("ASoC: SDCA: Create ALSA controls from DisCo")
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://patch.msgid.link/20260204125944.1134011-3-ckeepax@opensource.cirrus.com
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.dev>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c7b6c6b605 ]
Whilst SDCA does specify an Access Mode for each Control, there is not a
1-to-1 mapping between that and ASoC's internal representation. Some
registers require being treated as volatile from the hosts perspective
even in their Access Mode is Read-Write. Add an explicit list of SDCA
controls that should be forced volatile.
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.dev>
Link: https://patch.msgid.link/20251020155512.353774-10-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Stable-dep-of: 9fad74b79e ("ASoC: SDCA: Handle volatile controls correctly")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b27b57f85f ]
Support for -cn- properties has already been added, however the TODO
comment noting this feature was required was not removed. Remove the
now redundant comment.
Fixes: 50a479527e ("ASoC: SDCA: Add support for -cn- value properties")
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://patch.msgid.link/20260204125944.1134011-2-ckeepax@opensource.cirrus.com
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.dev>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 750817a7c4 ]
The driver currently returns an incorrect error code when a chain command
fails. In this case, ERT_CMD_STATE_ERROR is expected to be reported for
failed chain commands.
Fixes: aac243092b ("accel/amdxdna: Add command execution")
Reviewed-by: Mario Limonciello (AMD) <superm1@kernel.org>
Reviewed-by: Maciej Falkowski <maciej.falkowski@linux.intel.com>
Signed-off-by: Lizhi Hou <lizhi.hou@amd.com>
Link: https://patch.msgid.link/20260203184037.2751889-1-lizhi.hou@amd.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 56f7db581e ]
During a warm reset flow, the cl->device pointer may be NULL if the
reset occurs while clients are still being enumerated. Accessing
cl->device->reference_count without a NULL check leads to a kernel panic.
This issue was identified during multi-unit warm reboot stress clycles.
Add a defensive NULL check for cl->device to ensure stability under
such intensive testing conditions.
KASAN: null-ptr-deref in range [0000000000000000-0000000000000007]
Workqueue: ish_fw_update_wq fw_reset_work_fn
Call Trace:
ishtp_bus_remove_all_clients+0xbe/0x130 [intel_ishtp]
ishtp_reset_handler+0x85/0x1a0 [intel_ishtp]
fw_reset_work_fn+0x8a/0xc0 [intel_ish_ipc]
Fixes: 3703f53b99 ("HID: intel_ish-hid: ISH Transport layer")
Signed-off-by: Ryan Lin <ryan.lin@intel.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 84dd57fb03 ]
The amdxdna_ubuf_map() function allocates memory for sg and
internal sg table structures, but it fails to free them if subsequent
operations (sg_alloc_table_from_pages or dma_map_sgtable) fail.
Fixes: bd72d4acda ("accel/amdxdna: Support user space allocated buffer")
Signed-off-by: Zishun Yi <zishun.yi.dev@gmail.com>
Reviewed-by: Lizhi Hou <lizhi.hou@amd.com>
Reviewed-by: Min Ma <mamin506@gmail.com>
Signed-off-by: Lizhi Hou <lizhi.hou@amd.com>
Link: https://patch.msgid.link/20260129171022.68578-1-zishun.yi.dev@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f1370241fe ]
Running jobs on a hardware context while it is in the process of
releasing resources can lead to use-after-free and crashes.
Fix this by stopping job scheduling before calling
aie2_release_resource() and restarting it after the release completes.
Additionally, aie2_sched_job_run() now checks whether the hardware
context is still active.
Fixes: 4fd6ca90fc ("accel/amdxdna: Refactor hardware context destroy routine")
Reviewed-by: Mario Limonciello (AMD) <superm1@kernel.org>
Signed-off-by: Lizhi Hou <lizhi.hou@amd.com>
Link: https://patch.msgid.link/20260130003255.2083255-1-lizhi.hou@amd.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a9162439ad ]
Some tests trigger a crash in iommu_sva_unbind_device() due to
accessing iommu_mm after the associated mm structure has been
freed.
Fix this by taking an explicit reference to the mm structure
after successfully binding the device, and releasing it only
after the device is unbound. This ensures the mm remains valid
for the entire SVA bind/unbind lifetime.
Fixes: be462c97b7 ("accel/amdxdna: Add hardware context")
Reviewed-by: Mario Limonciello (AMD) <superm1@kernel.org>
Signed-off-by: Lizhi Hou <lizhi.hou@amd.com>
Link: https://patch.msgid.link/20260128002356.1858122-1-lizhi.hou@amd.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0ba6286a71 ]
Add writeable_reg callbacks for Tegra210/186 AHUB RX registers so the
flat cache only treats valid RX locations as writable, avoiding holes
in the register map.
Fixes: 16e1bcc2ca ("ASoC: tegra: Add Tegra210 based AHUB driver")
Signed-off-by: Sheetal <sheetal@nvidia.com>
Reviewed-by: Jon Hunter <jonathanh@nvidia.com>
Tested-by: Jon Hunter <jonathanh@nvidia.com>
Link: https://patch.msgid.link/20260123095346.1258556-2-sheetal@nvidia.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f8b4cd2dad ]
kvfree_call_rcu() can be called while holding a raw_spinlock_t.
Since __kfree_rcu_sheaf() may acquire a spinlock_t (which becomes a
sleeping lock on PREEMPT_RT) and violate lock nesting rules,
kvfree_call_rcu() bypasses the sheaves layer entirely on PREEMPT_RT.
However, lockdep still complains about acquiring spinlock_t while holding
raw_spinlock_t, even on !PREEMPT_RT where spinlock_t is a spinning lock.
This causes a false lockdep warning [1]:
=============================
[ BUG: Invalid wait context ]
6.19.0-rc6-next-20260120 #21508 Not tainted
-----------------------------
migration/1/23 is trying to lock:
ffff8afd01054e98 (&barn->lock){..-.}-{3:3}, at: barn_get_empty_sheaf+0x1d/0xb0
other info that might help us debug this:
context-{5:5}
3 locks held by migration/1/23:
#0: ffff8afd01fd89a8 (&p->pi_lock){-.-.}-{2:2}, at: __balance_push_cpu_stop+0x3f/0x200
#1: ffffffff9f15c5c8 (rcu_read_lock){....}-{1:3}, at: cpuset_cpus_allowed_fallback+0x27/0x250
#2: ffff8afd1f470be0 ((local_lock_t *)&pcs->lock){+.+.}-{3:3}, at: __kfree_rcu_sheaf+0x52/0x3d0
stack backtrace:
CPU: 1 UID: 0 PID: 23 Comm: migration/1 Not tainted 6.19.0-rc6-next-20260120 #21508 PREEMPTLAZY
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.14.0-0-g155821a1990b-prebuilt.qemu.org 04/01/2014
Stopper: __balance_push_cpu_stop+0x0/0x200 <- balance_push+0x118/0x170
Call Trace:
<TASK>
__dump_stack+0x22/0x30
dump_stack_lvl+0x60/0x80
dump_stack+0x19/0x24
__lock_acquire+0xd3a/0x28e0
? __lock_acquire+0x5a9/0x28e0
? __lock_acquire+0x5a9/0x28e0
? barn_get_empty_sheaf+0x1d/0xb0
lock_acquire+0xc3/0x270
? barn_get_empty_sheaf+0x1d/0xb0
? __kfree_rcu_sheaf+0x52/0x3d0
_raw_spin_lock_irqsave+0x47/0x70
? barn_get_empty_sheaf+0x1d/0xb0
barn_get_empty_sheaf+0x1d/0xb0
? __kfree_rcu_sheaf+0x52/0x3d0
__kfree_rcu_sheaf+0x19f/0x3d0
kvfree_call_rcu+0xaf/0x390
set_cpus_allowed_force+0xc8/0xf0
[...]
</TASK>
This wasn't triggered until sheaves were enabled for all slab caches,
since kfree_rcu() wasn't being called with a raw spinlock held for
caches with sheaves (vma, maple node).
As suggested by Vlastimil Babka, fix this by using a lockdep map with
LD_WAIT_CONFIG wait type to tell lockdep that acquiring spinlock_t is valid
in this case, as those spinlocks won't be used on PREEMPT_RT.
Note that kfree_rcu_sheaf_map should be acquired using _try() variant,
otherwise the acquisition of the lockdep map itself will trigger an invalid
wait context warning.
Reported-by: Paul E. McKenney <paulmck@kernel.org>
Closes: https://lore.kernel.org/linux-mm/c858b9af-2510-448b-9ab3-058f7b80dd42@paulmck-laptop [1]
Fixes: ec66e0d599 ("slab: add sheaf support for batching kfree_rcu() operations")
Suggested-by: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Harry Yoo <harry.yoo@oracle.com>
Reviewed-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Sasha Levin <sashal@kernel.org>
