add support for Dell privacy driver for the Dell units equipped
hardware privacy design, which protect users privacy of audio and
camera from hardware level. Once the audio or camera privacy mode
activated, any applications will not get any audio or video stream
when user pressed ctrl+F4 hotkey, audio privacy mode will be
enabled, micmute led will be also changed accordingly
The micmute led is fully controlled by hardware & EC(embedded controller)
and camera mute hotkey is Ctrl+F9. Currently design only emits
SW_CAMERA_LENS_COVER event while the camera lens shutter will be
changed by EC & HW(hardware) control
*The flow is like this:
1) User presses key. HW does stuff with this key (timeout timer is started)
2) WMI event is emitted from BIOS to kernel
3) WMI event is received by dell-privacy
4) KEY_MICMUTE emitted from dell-privacy
5) Userland picks up key and modifies kcontrol for SW mute
6) Codec kernel driver catches and calls ledtrig_audio_set
7) dell-privacy notifies EC, the timeout is cancelled and the HW mute
is activated. If the EC is not notified then the HW mic mute will
activate when the timeout triggers, just a bit later than with the
active ack.
Signed-off-by: Perry Yuan <perry_yuan@dell.com>
Link: https://lore.kernel.org/r/20210506115605.1504-1-Perry_Yuan@Dell.com
[hdegoede@redhat.com: Rework Kconfig/Makefile bits + other small fixups]
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Rename dell-wmi.c to dell-wmi-base.c, so that we can have other
dell-wmi-foo.c files which can be added to dell-wmi.ko as "plugins"
controlled by separate boolean Kconfig options.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
The X1 Carbon Gen 9 uses two fans instead of one like the previous
generation. This adds support for the second fan. It has been tested
on my X1 Carbon Gen 9 (20XXS00100) and works fine.
Signed-off-by: Til Jasper Ullrich <tju@tju.me>
Link: https://lore.kernel.org/r/20210525150950.14805-1-tju@tju.me
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
VPC event bit 10 gets set on a Yoga 300-11IBR when the EC believes that the
device has changed between laptop/tent/stand/tablet mode.
The EC relies on getting angle info from 2 accelerometers through a special
windows service calling a DSM on the DUAL250E ACPI-device. Linux does not
do this, making the laptop/tent/stand/tablet mode info unreliable.
Ignore VPC event bit 10 to avoid the warnings triggered by the default case
in ideapad_acpi_notify().
Note that the plan for Linux is to have iio-sensor-proxy read the 2
accelerometers and have it provide info about which mode 360° hinges
2-in-1s to the rest of userspace:
https://gitlab.freedesktop.org/hadess/iio-sensor-proxy/-/issues/216
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20210523172331.177834-1-hdegoede@redhat.com
5th- and 6th-generation Surface devices have all SAM clients defined in
ACPI, except for the platform profile/performance mode which his handled
via the WSID (Windows Surface Integration Device). Thus, the node groups
for those devices are the same and we can just use a single one instead
of re-defining the same one over and over again.
Signed-off-by: Maximilian Luz <luzmaximilian@gmail.com>
Link: https://lore.kernel.org/r/20210523134528.798887-4-luzmaximilian@gmail.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Add support for the 13" Intel version of the Surface Laptop 4.
Use the existing node group for the Surface Laptop 3 since the 15" AMD
version already shares its WSID HID with its predecessor and there don't
seem to be any significant differences with regards to SAM.
Signed-off-by: Maximilian Luz <luzmaximilian@gmail.com>
Link: https://lore.kernel.org/r/20210523134528.798887-3-luzmaximilian@gmail.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
The 15" AMD version of the Surface Laptop 4 shares its WSID HID with the
15" AMD version of the Surface Laptop 3. Update the comments
accordingly.
Signed-off-by: Maximilian Luz <luzmaximilian@gmail.com>
Link: https://lore.kernel.org/r/20210523134528.798887-2-luzmaximilian@gmail.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
The quirks added to asus-nb-wmi for the ASUS ROG Zephyrus G14 and G15 are
wrong, they tell the asus-wmi code to use the vendor specific WMI backlight
interface. But there is no such interface on these laptops.
As a side effect, these quirks stop the acpi_video driver to register since
they make acpi_video_get_backlight_type() return acpi_backlight_vendor,
leaving only the native AMD backlight driver in place, which is the one we
want. This happy coincidence is being replaced with a new quirk in
drivers/acpi/video_detect.c which actually sets the backlight_type to
acpi_backlight_native fixinf this properly. This reverts
commit 13bceda68f ("platform/x86: asus-nb-wmi: add support for ASUS ROG
Zephyrus G14 and G15").
Signed-off-by: Luke D. Jones <luke@ljones.dev>
Link: https://lore.kernel.org/r/20210419074915.393433-3-luke@ljones.dev
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
This is a preparation revert for reverting the "add support for ASUS ROG
Zephyrus G14 and G15" change. This reverts
commit 67186653c9 ("platform/x86: asus-nb-wmi: Drop duplicate DMI quirk
structures")
Signed-off-by: Luke D. Jones <luke@ljones.dev>
Link: https://lore.kernel.org/r/20210419074915.393433-2-luke@ljones.dev
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
This driver was originally intended to support some HP laptops, but
later support was added for Xioami and AMD laptops.
Rename it to make it clear that it supports a larger variety of
systems.
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://lore.kernel.org/r/20210519174405.30155-1-mario.limonciello@amd.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Those blobs can only be read. So, don't confuse users with 'writable'
flags. Also, remove S_IFREG because debugfs takes care of that.
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Link: https://lore.kernel.org/r/20210517100746.29663-2-wsa+renesas@sang-engineering.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Making '==' operation with ESM_STATUS_CMD_UNSUCCESSFUL directly
after calling the function inb() is more efficient, so assignment
to 'cmd_status' is redundant.
Eliminate the following clang_analyzer warning:
drivers/platform/x86/dell/dcdbas.c:397:11: warning: Although the value
stored to 'cmd_status' is used in the enclosing expression, the value
is never actually read from 'cmd_status'
No functional change.
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Link: https://lore.kernel.org/r/1620809825-84105-1-git-send-email-yang.lee@linux.alibaba.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
The Type-C connector on these devices is connected to DP-2 not DP-1,
so the reference must be to the DD04 child-node of the GPU, rather
then the DD02 child-node.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20210503154647.142551-10-hdegoede@redhat.com
1. Check acpi type before assignment of each property value
2. Add boundary check for properties count
Co-developed-by: Divya Bharathi <divya.bharathi@dell.com>
Signed-off-by: Divya Bharathi <divya.bharathi@dell.com>
Signed-off-by: Prasanth KSR <prasanth.ksr@dell.com>
Link: https://lore.kernel.org/r/20210512102530.9704-1-prasanth.ksr@dell.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Similar to some other CP210x device types, CP2108 has a number of GPIO
pins that can be exposed through gpiolib.
CP2108 has four serial interfaces but only one set of GPIO pins, which
is modelled as a single gpio chip and registered as a child of the first
interface.
CP2108 has 16 GPIOs so the width of the state variables needs to be
extended to 16 bits and this is also reflected in the control requests.
Like CP2104, CP2108 have GPIO pins with configurable alternate
functions and pins unavailable for GPIO use are determined and reported
to gpiolib at probe.
Signed-off-by: Pho Tran <pho.tran@silabs.com>
Co-developed-by: Tung Pham <tung.pham@silabs.com>
Signed-off-by: Tung Pham <tung.pham@silabs.com>
[ johan: rewrite gpio get() and set(); misc cleanups; amend commit
message ]
Link: https://lore.kernel.org/r/20210610132844.25495-1-johan@kernel.org
Signed-off-by: Johan Hovold <johan@kernel.org>
We need to be able to build an sg table from our list of buddy blocks,
so that we can later plug this into our ttm backend, and replace our use
of the range manager.
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210616152501.394518-2-matthew.auld@intel.com
Add back our standalone i915_buddy allocator and integrate it into a
ttm_resource_manager. This will plug into our ttm backend for managing
device local-memory in the next couple of patches.
v2(Thomas):
- Return -ENOSPC from the buddy; ttm expects this in order to
trigger eviction
- Drop the unnecessary inline
- bo->page_alignment is in page units
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Acked-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210616152501.394518-1-matthew.auld@intel.com
The device is not losing context on CPU_CLUSTER_PM_ERROR. As we are only
saving and restoring context with cpu_pm, there is no need to restore the
context in case of an error.
Note that the unnecessary restoring of context does not cause issues, it's
just not needed.
Cc: Lokesh Vutla <lokeshvutla@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20210518075306.35532-1-tony@atomide.com
Bad counter reads are experienced sometimes when bit 10 or greater rolls
over. Originally, testing showed that at least 10 lower bits would be
set to the same value during these bad reads. However, some users still
reported time skips.
Wider testing revealed that on some chips, occasionally only the lowest
9 bits would read as the anomalous value. During these reads (which
still happen only when bit 10), bit 9 would read as the correct value.
Reduce the mask by one bit to cover these cases as well.
Cc: stable@vger.kernel.org
Fixes: c950ca8c35 ("clocksource/drivers/arch_timer: Workaround for Allwinner A64 timer instability")
Reported-by: Roman Stratiienko <r.stratiienko@gmail.com>
Signed-off-by: Samuel Holland <samuel@sholland.org>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20210515021439.55316-1-samuel@sholland.org
Fix the following coccicheck warning:
drivers/clocksource/arm_global_timer.c:107:4-23:
duplicated argument to & or |
Signed-off-by: Wan Jiabing <wanjiabing@vivo.com>
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20210615115440.8881-1-wanjiabing@vivo.com
The sparse tool complains as follows:
drivers/clocksource/arm_global_timer.c:54:23: warning:
symbol 'gt_clk_rate_change_nb' was not declared. Should it be static?
This symbol is not used outside of arm_global_timer.c, so mark it static.
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Zou Wei <zou_wei@huawei.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/1623490046-37972-1-git-send-email-zou_wei@huawei.com
Now ARM global timer driver could work even if it's source clock rate
changes, so we don't need to disable that driver when cpu frequency scaling
is in use.
This cause Zynq arch to get support for timer delay and get_cycles().
Signed-off-by: Andrea Merello <andrea.merello@gmail.com>
Cc: Patrice Chotard <patrice.chotard@st.com>
Cc: linux-kernel@vger.kernel.org
Cc: linux-arm-kernel@lists.infradead.org
Cc: Michal Simek <michal.simek@xilinx.com>
Cc: Sören Brinkmann <soren.brinkmann@xilinx.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20210406130045.15491-3-andrea.merello@gmail.com
This patch adds rate change notification support for the parent clock;
should that clock change, then we try to adjust the our prescaler in order
to compensate (i.e. we adjust to still get the same timer frequency).
This is loosely based on what it's done in timer-cadence-ttc. timer-sun51,
mips-gic-timer and smp_twd.c also seem to look at their parent clock rate
and to perform some kind of adjustment whenever needed.
In this particular case we have only one single counter and prescaler for
all clocksource, clockevent and timer_delay, and we just update it for all
(i.e. we don't let it go and call clockevents_update_freq() to notify to
the kernel that our rate has changed).
Note that, there is apparently no other way to fixup things, because once
we call register_current_timer_delay(), specifying the timer rate, it seems
that that rate is not supposed to change ever.
In order for this mechanism to work, we have to make assumptions about how
much the initial clock is supposed to eventually decrease from the initial
one, and set our initial prescaler to a value that we can eventually
decrease enough to compensate. We provide an option in KConfig for this.
In case we end up in a situation in which we are not able to compensate the
parent clock change, we fail returning NOTIFY_BAD.
This fixes a real-world problem with Zynq arch not being able to use this
driver and CPU_FREQ at the same time (because ARM global timer is fed by
the CPU clock, which may keep changing when CPU_FREQ is enabled).
Signed-off-by: Andrea Merello <andrea.merello@gmail.com>
Cc: Patrice Chotard <patrice.chotard@st.com>
Cc: linux-kernel@vger.kernel.org
Cc: linux-arm-kernel@lists.infradead.org
Cc: Michal Simek <michal.simek@xilinx.com>
Cc: Sören Brinkmann <soren.brinkmann@xilinx.com>
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20210406130045.15491-2-andrea.merello@gmail.com
There's no good reason for the verify_size macro to live inside the
function. Move it up with the check_size() macro and fix indenting.
Cc: Anton Vorontsov <anton@enomsg.org>
Cc: Colin Cross <ccross@android.com>
Cc: Tony Luck <tony.luck@intel.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
There was no feedback on bad registration attempts. Add details on the
failure cause.
Cc: Anton Vorontsov <anton@enomsg.org>
Cc: Colin Cross <ccross@android.com>
Cc: Tony Luck <tony.luck@intel.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
The legay ide driver has been replace with libata starting in 2003 and has
been scheduled for removal for a while. Finally kill it off so that we
can start cleaning up various bits of cruft it forced on the block layer.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Switch the m68 defconfigs from the deprecated ide subsystem to use libata
instead.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Link: https://lore.kernel.org/r/20210616134658.1471835-6-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
pxa_defconfig already enables libata including the pata_pcmcia driver, so
drop the legacy ide driver and idecs host driver.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20210616134658.1471835-5-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
footbridge_defconfig enables CONFIG_IDE but no actual host controller
driver, so just drop it.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20210616134658.1471835-4-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Multiple users report that they need to disable DMA on this driver,
so provide an option to do so without affecting all of libata.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://lore.kernel.org/r/20210616134658.1471835-2-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Mark queue init done when everything is done well in blk_register_queue(),
so that wbt_enable_default() can be run quickly without any RCU period
involved since adding rq qos requires to freeze queue.
Also no any side effect by delaying to mark queue init done.
Reported-by: Yi Zhang <yi.zhang@redhat.com>
Cc: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Tested-by: Yi Zhang <yi.zhang@redhat.com>
Link: https://lore.kernel.org/r/20210609015822.103433-3-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Yi reported several kernel panics on:
[16687.001777] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000008
...
[16687.163549] pc : __rq_qos_track+0x38/0x60
or
[ 997.690455] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000020
...
[ 997.850347] pc : __rq_qos_done+0x2c/0x50
Turns out it is caused by race between adding rq qos(wbt) and normal IO
because rq_qos_add can be run when IO is being submitted, fix this issue
by freezing queue before adding/deleting rq qos to queue.
rq_qos_exit() needn't to freeze queue because it is called after queue
has been frozen.
iolatency calls rq_qos_add() during allocating queue, so freezing won't
add delay because queue usage refcount works at atomic mode at that
time.
iocost calls rq_qos_add() when writing cgroup attribute file, that is
fine to freeze queue at that time since we usually freeze queue when
storing to queue sysfs attribute, meantime iocost only exists on the
root cgroup.
wbt_init calls it in blk_register_queue() and queue sysfs attribute
store(queue_wb_lat_store() when write it 1st time in case of !BLK_WBT_MQ),
the following patch will speedup the queue freezing in wbt_init.
Reported-by: Yi Zhang <yi.zhang@redhat.com>
Cc: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Tested-by: Yi Zhang <yi.zhang@redhat.com>
Link: https://lore.kernel.org/r/20210609015822.103433-2-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Instead of returning the the PTR_ERR directly, use dev_err_probe which
will also correctly set the deferred probe reason in
/sys/kernel/debug/deferred_devices, making it easier to debug missing
devices on the system.
Signed-off-by: Rouven Czerwinski <r.czerwinski@pengutronix.de>
Link: https://lore.kernel.org/r/20210616125331.153414-1-r.czerwinski@pengutronix.de
Signed-off-by: Mark Brown <broonie@kernel.org>
At the context with *rdev, use rdev_get_drvdata() is more intuitive.
Signed-off-by: Axel Lin <axel.lin@ingics.com>
Reviewed-by: Alistair Francis <alistair@alistair23.me>
Link: https://lore.kernel.org/r/20210616034458.3499522-3-axel.lin@ingics.com
Signed-off-by: Mark Brown <broonie@kernel.org>
It's only used in this file and never changed, make it static const.
Signed-off-by: Axel Lin <axel.lin@ingics.com>
Reviewed-by: Alistair Francis <alistair@alistair23.me>
Link: https://lore.kernel.org/r/20210616034458.3499522-2-axel.lin@ingics.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The platform_device_id table is supposed to be zero-terminated.
Signed-off-by: Axel Lin <axel.lin@ingics.com>
Reviewed-by: Alistair Francis <alistair@alistair23.me>
Link: https://lore.kernel.org/r/20210616034458.3499522-1-axel.lin@ingics.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The vsel active level is for the normal voltage, the opposite level is
the suspend voltage.
Signed-off-by: Axel Lin <axel.lin@ingics.com>
Reviewed-by: ChiYuan Huang <cy_huang@richtek.com>
Link: https://lore.kernel.org/r/20210616011816.3479406-1-axel.lin@ingics.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This symbol is not used outside of hdmi-codec.c, so marks it static.
Fix the following sparse warning:
sound/soc/codecs/hdmi-codec.c:750:25: warning: symbol
'hdmi_codec_controls' was not declared. Should it be static?
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Link: https://lore.kernel.org/r/1623822941-3077-1-git-send-email-jiapeng.chong@linux.alibaba.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Return statements in functions returning bool should use true/false
instead of 1/0.
Fix the following coccicheck warning:
./sound/soc/codecs/wcd938x.c:1190:9-10: WARNING: return of 0/1 in
function 'wcd938x_volatile_register' with return type bool.
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Link: https://lore.kernel.org/r/1623811535-15841-1-git-send-email-yang.lee@linux.alibaba.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Clean up the following includecheck warnings:
./sound/soc/codecs/wcd938x.c: sound/soc.h is included more than once.
./sound/soc/codecs/wcd938x-sdw.c: sound/soc.h is included more than
once.
No functional change.
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Link: https://lore.kernel.org/r/1623822667-130511-1-git-send-email-jiapeng.chong@linux.alibaba.com
Signed-off-by: Mark Brown <broonie@kernel.org>