This implementation uses spin_until_cond in wd_smp_lock including
neither linux/processor.h nor asm/processor.h
This patch includes linux/processor.h here for spin_until_cond usage.
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/5e8d2d50f301a346040362028c2ecba40685de9e.1623438544.git.christophe.leroy@csgroup.eu
PPC_TRANSACTIONAL_MEM is only on book3s/64
SPE is only on booke
PPC_TRANSACTIONAL_MEM selects ALTIVEC and VSX
Therefore, within PPC_TRANSACTIONAL_MEM sections,
ALTIVEC and VSX are always defined while SPE never is.
Remove all SPE code and all #ifdef ALTIVEC and VSX in tm
functions.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/a069a348ee3c2fe3123a5a93695c2b35dc42cb40.1623340691.git.christophe.leroy@csgroup.eu
Make our stack-walking code KASAN-safe by using __no_sanitize_address.
Generic code, arm64, s390 and x86 all make accesses unchecked for similar
sorts of reasons: when unwinding a stack, we might touch memory that KASAN
has marked as being out-of-bounds. In ppc64 KASAN development, I hit this
sometimes when checking for an exception frame - because we're checking
an arbitrary offset into the stack frame.
See commit 2095574632 ("s390/kasan: avoid false positives during stack
unwind"), commit bcaf669b4b ("arm64: disable kasan when accessing
frame->fp in unwind_frame"), commit 91e08ab0c8 ("x86/dumpstack:
Prevent KASAN false positive warnings") and commit 6e22c83664
("tracing, kasan: Silence Kasan warning in check_stack of stack_tracer").
Signed-off-by: Daniel Axtens <dja@axtens.net>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210614120907.1952321-1-dja@axtens.net
With the MMCR0 control bit (PMCCEXT) in ISA v3.1, read access to
group B registers is restricted when MMCR0 PMCC=0b00. In other
platforms (like power9), the older behaviour works where group B
PMU SPRs are readable.
Patch creates a selftest which verifies that the test takes a
SIGILL when attempting to read PMU registers via helper function
"dump_ebb_state" for ISA v3.1.
Signed-off-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Tested-by: Nageswara R Sastry <rnsastry@linux.ibm.com <mailto:rnsastry@linux.ibm.com>>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/1621950703-1532-3-git-send-email-atrajeev@linux.vnet.ibm.com
The "no_handler_test" in ebb selftests attempts to read the PMU
registers twice via helper function "dump_ebb_state". First dump is
just before closing of event and the second invocation is done after
closing of the event. The original intention of second
dump_ebb_state was to dump the state of registers at the end of
the test when the counters are frozen. But this will be achieved
with the first call itself since sample period is set to low value
and PMU will be frozen by then. Hence patch removes the
dump which was done before closing of the event.
Reported-by: Shirisha Ganta <shirisha.ganta1@ibm.com>
Signed-off-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Tested-by: Nageswara R Sastry <rnsastry@linux.ibm.com <mailto:rnsastry@linux.ibm.com>>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/1621950703-1532-2-git-send-email-atrajeev@linux.vnet.ibm.com
Comment says that __main() is there to make GCC happy.
It's been there since the implementation of ppc arch in Linux 1.3.45.
ppc32 is the only architecture having that. Even ppc64 doesn't have it.
Seems like GCC is still happy without it.
Drop it for good.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/d01028f8166b98584eec536b52f14c5e3f98ff6b.1623172922.git.christophe.leroy@csgroup.eu
PTE_SIZE means PTE page table size in most placed, whereas
in hash_low.S in means size of one entry in the table.
Rename it PTE_T_SIZE, and define it directly in hash_low.S
instead of going through asm-offsets.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/83a008a9fd6cc3f2bbcb470f592555d260ed7a3d.1623063174.git.christophe.leroy@csgroup.eu
At the time being, empty_zero_page[] is defined in each
platform head.S.
Define it in mm/mem.c instead, and put it in BSS section instead
of the DATA section. Commit 5227cfa71f ("arm64: mm: place
empty_zero_page in bss") explains why it is interesting to have
it in BSS.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/5838caffa269e0957c5a50cc85477876220298b0.1623063174.git.christophe.leroy@csgroup.eu
DEBUG_CLAMP_LAST_CONTEXT was there in the old days to reduce
number of contexts in order to ease debugging implementation
of context switching, but that's been quite stable during
years now.
As it is not user selectable, remove it.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/da81837b452e8b9f1657b529b9c3050dc10b9770.1622712515.git.christophe.leroy@csgroup.eu
All KUAP helpers defined in asm/kup.h are single line functions
that should be inlined. But on book3s/32 build, we get many
instances of <prevent_write_to_user.constprop.0>.
Force inlining of those helpers.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/8479a862e165a57a855292d47e24c259a578f5a0.1622711627.git.christophe.leroy@csgroup.eu
Now that KUAP and KUEP have been significantly optimised and can be
disabled at boot time using 'nosmap' and 'nosmep' kernel parameters,
them can be active by default like in other powerpc platforms.
It is still possible to disable them completely in the configuration.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/86c7c74a3ba5312daea7e9658b096e2bcc6f4b64.1622708530.git.christophe.leroy@csgroup.eu
PPC64 uses MMU features to enable/disable KUAP at boot time.
But feature fixups are applied way too early on PPC32.
Now that all KUAP related actions are in C following the
conversion of KUAP initial setup and context switch in C,
static branches can be used to enable/disable KUAP.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
[mpe: Export disable_kuap_key to fix build errors]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/cd79e8008455fba5395d099f9bb1305c039b931c.1622708530.git.christophe.leroy@csgroup.eu
PPC64 uses MMU features to enable/disable KUEP at boot time.
But feature fixups are applied way too early on PPC32.
Now that all KUEP related actions are in C following the
conversion of KUEP initial setup and context switch in C,
static branches can be used to enable/disable KUEP.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/7745a2c3a08ec46302920a3f48d1cb9b5469dbbb.1622708530.git.christophe.leroy@csgroup.eu
segment register has VSID on bits 8-31.
Bits 4-7 are reserved, there is no requirement to set them to 0.
VSIDs are calculated from VSID of SR0 by adding 0x111.
Even with highest possible VSID which would be 0xFFFFF0,
adding 16 times 0x111 results in 0x1001100.
So, the reserved bits are never overflowed, no need to clear
the reserved bits after each calculation.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/ddc1cfd2ec8f3b2395c6a4d7f2b0c1aa1b1e64fb.1622708530.git.christophe.leroy@csgroup.eu
switch_mmu_context() does things that can easily be done in C.
For updating user segments, we have update_user_segments().
As mentionned in commit b5efec00b6 ("powerpc/32s: Move KUEP
locking/unlocking in C"), update_user_segments() has the loop
unrolled which is a significant performance gain.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/05c0875ad8220c03452c3a334946e207c6ca04d6.1622708530.git.christophe.leroy@csgroup.eu
KUEP implements the update of user segment registers.
Move it into mmu-hash.h in order to use it from other places.
And inline kuep_lock() and kuep_unlock(). Inlining kuep_lock() is
important for system_call_exception(), otherwise system_call_exception()
has to save into stack the system call parameters that are used just
after, and doing that takes more instructions than kuep_lock() itself.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/24591ca480d14a62ef910e38a5273d551262c4a2.1622708530.git.christophe.leroy@csgroup.eu
nip is already an unsigned long, no cast needed.
op_callback_addr and emulate_step_addr are kprobe_opcode_t *.
There value is obtained with ppc_kallsyms_lookup_name() which
returns 'unsigned long', and there values are used create_branch()
which expects 'unsigned long'. So change them to 'unsigned long'
to avoid casting them back and forth.
can_optimize() used p->addr several times as 'unsigned long'.
Use a local 'unsigned long' variable and avoid casting multiple times.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/e03192a6d4123242a275e71ce2ba0bb4d90700c1.1621516826.git.christophe.leroy@csgroup.eu
'struct ppc_inst' is an internal representation of an instruction, but
in-memory instructions are and will remain a table of 'u32' forever.
Replace all 'struct ppc_inst *' used for locating an instruction in
memory by 'u32 *'. This removes a lot of undue casts to 'struct
ppc_inst *'.
It also helps locating ab-use of 'struct ppc_inst' dereference.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
[mpe: Fix ppc_inst_next(), use u32 instead of unsigned int]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/7062722b087228e42cbd896e39bfdf526d6a340a.1621516826.git.christophe.leroy@csgroup.eu
'struct ppc_inst' is meant to represent an instruction internally, it
is not meant to dereference code in memory.
For testing code patching, use patch_instruction() to properly
write into memory the code to be tested.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/d8425fb42a4adebc35b7509f121817eeb02fac31.1621516826.git.christophe.leroy@csgroup.eu
Allocating an IRQ is conditional to the IRQ existence, but freeing it
was not. If no IRQ was allocate, the driver would still try to free
IRQ 0. Add the missing checks.
This fixes the following trace when the driver is removed:
[ 100.667788] Trying to free already-free IRQ 0
[ 100.667793] WARNING: CPU: 0 PID: 2315 at kernel/irq/manage.c:1826 free_irq+0x1fd/0x370
...
[ 100.667914] Call Trace:
[ 100.667920] tcs3472_remove+0x3a/0x90 [tcs3472]
[ 100.667927] i2c_device_remove+0x2b/0xa0
Signed-off-by: frank zago <frank@zago.net>
Link: https://lore.kernel.org/r/20210427022017.19314-2-frank@zago.net
Fixes: 9d2f715d59 ("iio: light: tcs3472: support out-of-threshold events")
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
It is quite strange that BMA222 and BMA222E have very close, yet
subtly different values in their scale tables. Comparing the datasheets
this is simply because the "Resolution" for the different measurement
ranges are documented with different precision.
For example, for +-2g the BMA222 datasheet [1] suggests a resolution
of 15.6 mg/LSB, while the BMA222E datasheet [2] suggests 15.63 mg/LSB.
Actually, there is no need to rely on the resolution given by the Bosch
datasheets. The resolution and scale can be calculated more consistently
and accurately using the range (e.g. +-2g) and the channel size (e.g. 8 bits).
Distributing 4g (-2g to 2g) over 8 bits results in an exact resolution
of (4g / 2^8) = 15.625 mg/LSB which is the same value as in both datasheets,
just slightly more accurate. Multiplying g = 9.80665 m/s^2 we get a more
accurate value for the IIO scale table.
Generalizing this we can calculate the scale tables more accurately using
(range / 2^bits) * g * 10^6 (because of IIO_VAL_INT_PLUS_MICRO).
Document this and make the scale tables more consistent and accurate
for all the variants using that formula. Now the scale tables for
BMA222 and BMA222E are consistent and probably slightly more accurate.
[1]: https://media.digikey.com/pdf/Data%20Sheets/Bosch/BMA222.pdf
[2]: https://www.mouser.com/datasheet/2/783/BST-BMA222E-DS004-06-1021076.pdf
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gnail.com>
Link: https://lore.kernel.org/r/20210611182442.1971-1-stephan@gerhold.net
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
General driver churn doesn't always include updates of header includes.
Manual review of the output of the include-what-you-use checker lead to the
following cleanup. Hopefuly this brings things back to a good state for the
hid-sensor drivers.
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Cc: Jiri Kosina <jikos@kernel.org>
Cc: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Link: https://lore.kernel.org/r/20210608205510.4033887-1-jic23@kernel.org
The devm_ handled runtime pm disable calls pm_runtime_put_sync_suspend()
which isn't balancing a matching get call. It isn't a bug as such,
because the runtime pm core doesn't decrement the reference count below
zero, but it is missleading so let's drop it.
Using pm_runtime_resume_and_get() new call makes it easy to handle
failures in resume as it doesn't hold a reference count if it exits
with an error.
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Cc: Jean-Baptiste Maneyrol <jmaneyrol@invensense.com>
Reviewed-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Link: https://lore.kernel.org/r/20210516162103.1332291-7-jic23@kernel.org
Using this new call makes it easy to handle any errors as a result
of runtime resume as it exits without leaving the reference count
elevated.
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Cc: Matt Ranostay <matt.ranostay@konsulko.com>
Acked-by: Matt Ranostay <matt.ranostay@konsulko.com>
Reviewed-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Link: https://lore.kernel.org/r/20210516162103.1332291-6-jic23@kernel.org
The pm_runtime_put_noidle() call in remove isn't balanced with any get, so
drop it. Note this isn't a bug as the runtime pm core will not allow the
reference count to go negative, making this a noop. However, it is
confusing to the reader so let's drop it.
pm_runtime_resume_and_get() replacement found using the coccicheck script
under review at:
https://lore.kernel.org/lkml/20210427141946.2478411-1-Julia.Lawall@inria.fr/
As pm_runtime_resume_and_get() returns <= 0 take advantage of that to
change the error checking to if (ret) which is more in keeping with the
rest of this driver.
This is a prequel to taking a closer look at the runtime pm in IIO drivers
in general.
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Cc: Matt Ranostay <matt.ranostay@konsulko.com>
Acked-by: Matt Ranostay <matt.ranostay@konsulko.com>
Reviewed-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Link: https://lore.kernel.org/r/20210516162103.1332291-4-jic23@kernel.org
The call to pm_runtime_put_noidle() in remove() is not balancing a
counter increment. Note this doesn't matter as the runtime pm core
will not allow the counter to go negative. However, it is confusing
to the reader so let's remove it.
The pm_runtime_resume_and_get() replacement was found using coccicheck
script under review at:
https://lore.kernel.org/lkml/20210427141946.2478411-1-Julia.Lawall@inria.fr/
This is a prequel to taking a closer look at the runtime pm in IIO drivers
in general.
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Link: https://lore.kernel.org/r/20210516162103.1332291-3-jic23@kernel.org
Remove an unblanced pm_runtime_put_sync_suspend() call
in inv_pu_pm_disable(). Not this call is not a bug, because the runtime
pm core will not allow the reference counter to go negative. It is
however confusing and serves no purpose.
pm_runtime_resume_and_get() case found using coccicheck script under
review at:
https://lore.kernel.org/lkml/20210427141946.2478411-1-Julia.Lawall@inria.fr/
pm_runtime_resume_and_get() returns <= 0 only so simplify related checks
to bring this more inline with nearby calls.
This is a prequel to taking a closer look at the runtime pm in IIO drivers
in general.
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Cc: Jean-Baptiste Maneyrol <jmaneyrol@invensense.com>
Reviewed-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Link: https://lore.kernel.org/r/20210516162103.1332291-2-jic23@kernel.org