A namespace for exported symbols makes clear who is a provider
and who is a consumer of the certain resources. Besides that,
it doesn't pollute the common namespace.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Link: https://lore.kernel.org/r/20210614162447.5392-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Add __aligned(8) to ensure the buffer passed to
iio_push_to_buffers_with_timestamp() is suitable for the naturally
aligned timestamp that will be inserted.
Here an explicit structure is not used, because the holes would
necessitate the addition of an explict memset(), to avoid a kernel
data leak, making for a less minimal fix.
Fixes: 1c28799257 ("iio: light: isl29501: Add support for the ISL29501 ToF sensor.")
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Cc: Mathieu Othacehe <m.othacehe@gmail.com>
Reviewed-by: Nuno Sá <nuno.sa@analog.com>
Link: https://lore.kernel.org/r/20210613152301.571002-9-jic23@kernel.org
Add __aligned(8) to ensure the buffer passed to
iio_push_to_buffers_with_timestamp() is suitable for the naturally
aligned timestamp that will be inserted.
Here an explicit structure is not used, because the holes would
necessitate the addition of an explict memset(), to avoid a potential
kernel data leak, making for a less minimal fix.
Fixes: 55707294c4 ("iio: light: Add support for vishay vcnl4035")
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Cc: Parthiban Nallathambi <pn@denx.de>
Reviewed-by: Nuno Sá <nuno.sa@analog.com>
Link: https://lore.kernel.org/r/20210613152301.571002-8-jic23@kernel.org
'struct ppc_inst' is an internal structure to represent an instruction,
it is not directly the representation of that instruction in text code.
It is not meant to map and dereference code.
Dereferencing code directly through 'struct ppc_inst' has two main issues:
- On powerpc, structs are expected to be 8 bytes aligned while code is
spread every 4 byte.
- Should a non prefixed instruction lie at the end of the page and the
following page not be mapped, it would generate a page fault.
In-memory code must be accessed with ppc_inst_read().
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/c9a1201dd0a66b4a0f91f0fb46d9385cbf030feb.1621516826.git.christophe.leroy@csgroup.eu
Avoid casting/dereferencing ppc_inst() as u64* , check each member
of the struct when relevant.
And remove the 0xff initialisation of the suffix for non
prefixed instruction. An instruction with 0xff as a suffix
might be invalid, but still is a prefixed instruction and
has to be considered as this.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/d8b155e930b7a9708ca110e8ff0ace6713a7af75.1621516826.git.christophe.leroy@csgroup.eu
This adds device tree bindings for the Intel IXP4xx
PCI controller which can be used as both host and
option.
Cc: devicetree@vger.kernel.org
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Imre Kaloz <kaloz@openwrt.org>
Cc: Krzysztof Halasa <khalasa@piap.pl>
Cc: Zoltan HERPAI <wigyori@uid0.hu>
Cc: Raylynn Knight <rayknight@me.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
In order to create a proper PCI driver for the IXP4xx
we need to make the old PCI driver and its reliance
on <mach/io.h> optional.
Create a new Kconfig symbol for the legacy PCI driver
IXP4XX_PCI_LEGACY and only activate NEED_MACH_IO_H
for this driver.
A few files need to be adjusted to explicitly include
the <mach/hardware.h> and <mach/cpu.h> headers that
they previously obtained implicitly using <linux/io.h>
that would include <mach/io.h> and in turn include
these two headers.
This breaks our reliance on the old PCI and indirect
PCI support so we can reimplement a proper purely
DT-based driver in the PCI subsystem.
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Imre Kaloz <kaloz@openwrt.org>
Cc: Krzysztof Halasa <khalasa@piap.pl>
Cc: Zoltan HERPAI <wigyori@uid0.hu>
Cc: Raylynn Knight <rayknight@me.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
UART1, UART2 and the expansion bus config registers
are the only registers mapped in a fixed location
when using device tree.
For device tree we also want to get rid of the custom
<mach/io.h> for IXP4xx. So we need to undefine
CONFIG_NEED_MACH_IO_H. Doing that activates the fixed
mapping of the PCI IO space to PCI_IO_VIRT_BASE which
is hardcoded to 0xFEE00000 and this would collide with
the old fixed mappings.
Move the fixed virtual IO base address from 0xFEF00000
to 0xFEC00000 in order to avoid the collision.
For the OF-only boot path let's even cut the reliance
on <mach/io.h> and just hardcode the one single virtbase
we need apart from the UART, which is hardcoded in
Kconfig.debug.
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Imre Kaloz <kaloz@openwrt.org>
Cc: Krzysztof Halasa <khalasa@piap.pl>
Cc: Zoltan HERPAI <wigyori@uid0.hu>
Cc: Raylynn Knight <rayknight@me.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
We must release the queue before freeing the tagset.
Fixes: 1c99502fae ("loop: use blk_mq_alloc_disk and blk_cleanup_disk")
Reported-by: Bruno Goncalves <bgoncalv@redhat.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Various places expect the request_queue in ->rq. Initialize it to
avoid NULL pointer derefences.
Fixes: 6966bb921d ("mtd_blkdevs: use blk_mq_alloc_disk")
Reported-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
When pipe A is disabled and MIPI DSI is enabled on pipe B,
the AMT KVMR feature will incorrectly see pipe A as enabled.
Set 0x42080 bit 23=1 before enabling DSI on pipe B and leave
it set while DSI is enabled on pipe B. No impact to setting
it all the time.
Changes since V5:
- Added reviewed-by
- Removed redundant braces and debug message format - Imre
Changes since V4:
- Modified function comment Wa_<number>:icl,jsl,ehl - Lucas
- Modified debug message in sync state - Imre
Changes since V3:
- More meaningful name to workaround - Imre
- Remove boolean check clear flag
- Add WA_verify hook in dsi sync_state
Changes since V2:
- Used REG_BIT, ignored pipe A and used sw state check - Jani
- Made function wrapper - Jani
Changes since V1:
- ./dim checkpatch errors addressed
Signed-off-by: Tejas Upadhyay <tejaskumarx.surendrakumar.upadhyay@intel.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210615105613.851491-1-tejaskumarx.surendrakumar.upadhyay@intel.com
Fixes the following W=1 kernel build warning(s):
drivers/ata/pata_sc1200.c:197:18: warning: initialized field overwritten [-Woverride-init]
drivers/ata/pata_sc1200.c:197:18: note: (near initialization for ‘sc1200_sht.sg_tablesize’)
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Cc: Mark Lord <mlord@pobox.com>
Cc: linux-ide@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20210528090502.1799866-10-lee.jones@linaro.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Fixes the following W=1 kernel build warning(s):
In file included from drivers/ata/sata_sil24.c:14:
drivers/ata/sata_sil24.c:378:16: warning: initialized field overwritten [-Woverride-init]
drivers/ata/sata_sil24.c:378:16: note: (near initialization for ‘sil24_sht.can_queue’)
Cc: Jens Axboe <axboe@kernel.dk>
Cc: linux-ide@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20210528090502.1799866-4-lee.jones@linaro.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Fixes the following W=1 kernel build warning(s):
In file included from drivers/ata/ahci_platform.c:21:
drivers/ata/ahci.h:388:16: warning: initialized field overwritten [-Woverride-init]
drivers/ata/ahci_platform.c:40:2: note: in expansion of macro ‘AHCI_SHT’
drivers/ata/ahci.h:388:16: note: (near initialization for ‘ahci_platform_sht.can_queue’)
drivers/ata/ahci_platform.c:40:2: note: in expansion of macro ‘AHCI_SHT’
drivers/ata/ahci.h:392:17: warning: initialized field overwritten [-Woverride-init]
drivers/ata/ahci_platform.c:40:2: note: in expansion of macro ‘AHCI_SHT’
drivers/ata/ahci.h:392:17: note: (near initialization for ‘ahci_platform_sht.sdev_attrs’)
drivers/ata/ahci_platform.c:40:2: note: in expansion of macro ‘AHCI_SHT’
In file included from drivers/ata/ahci_mtk.c:18:
drivers/ata/ahci.h:388:16: warning: initialized field overwritten [-Woverride-init]
drivers/ata/ahci_mtk.c:41:2: note: in expansion of macro ‘AHCI_SHT’
drivers/ata/ahci.h:388:16: note: (near initialization for ‘ahci_platform_sht.can_queue’)
drivers/ata/ahci_mtk.c:41:2: note: in expansion of macro ‘AHCI_SHT’
drivers/ata/ahci.h:392:17: warning: initialized field overwritten [-Woverride-init]
drivers/ata/ahci_mtk.c:41:2: note: in expansion of macro ‘AHCI_SHT’
drivers/ata/ahci.h:392:17: note: (near initialization for ‘ahci_platform_sht.sdev_attrs’)
drivers/ata/ahci_mtk.c:41:2: note: in expansion of macro ‘AHCI_SHT’
In file included from drivers/ata/ahci_dm816.c:16:
drivers/ata/ahci.h:388:16: warning: initialized field overwritten [-Woverride-init]
drivers/ata/ahci_dm816.c:138:2: note: in expansion of macro ‘AHCI_SHT’
drivers/ata/ahci.h:388:16: note: (near initialization for ‘ahci_dm816_platform_sht.can_queue’)
drivers/ata/ahci_dm816.c:138:2: note: in expansion of macro ‘AHCI_SHT’
drivers/ata/ahci.h:392:17: warning: initialized field overwritten [-Woverride-init]
drivers/ata/ahci_dm816.c:138:2: note: in expansion of macro ‘AHCI_SHT’
drivers/ata/ahci.h:392:17: note: (near initialization for ‘ahci_dm816_platform_sht.sdev_attrs’)
drivers/ata/ahci_dm816.c:138:2: note: in expansion of macro ‘AHCI_SHT’
NB: Snipped 150 lines of this for brevity!
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Philipp Zabel <p.zabel@pengutronix.de>
Cc: Tejun Heo <tj@kernel.org>
Cc: ALWAYS copy <linux-ide@vger.kernel.org>
Cc: linux-ide@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20210528090502.1799866-3-lee.jones@linaro.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
This is a pre-cursor to some upcoming W=1 fix-ups.
Fixes the following W=1 kernel build warning(s):
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Mark Lord <mlord@pobox.com>
Cc: Philipp Zabel <p.zabel@pengutronix.de>
Cc: Tejun Heo <tj@kernel.org>
Cc: linux-ide@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20210528090502.1799866-2-lee.jones@linaro.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
mm related header files are not needed for io-wq module.
remove them for a small clean-up.
Reviewed-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Olivier Langlois <olivier@trillion01.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The req pointer uniquely identify a specific request.
Having it in traces can provide valuable insights that is not possible
to have if the calling process is reusing the same user_data value.
Reviewed-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Olivier Langlois <olivier@trillion01.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
If the HPD GPIO is not available and drm_probe_ddc fails, we end up
reading the HDMI_HOTPLUG register, but the controller might be powered
off resulting in a CPU hang. Make sure we have the power domain and the
HSM clock powered during the detect cycle to prevent the hang from
happening.
Fixes: 4f6e3d66ac ("drm/vc4: Add runtime PM support to the HDMI encoder driver")
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210525091059.234116-4-maxime@cerno.tech
In order to access the HDMI controller, we need to make sure the HSM
clock is enabled. If we were to access it with the clock disabled, the
CPU would completely hang, resulting in an hard crash.
Since we have different code path that would require it, let's move that
clock enable / disable to runtime_pm that will take care of the
reference counting for us.
Fixes: 4f6e3d66ac ("drm/vc4: Add runtime PM support to the HDMI encoder driver")
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210525091059.234116-3-maxime@cerno.tech
DRM currently polls for the HDMI connector status every 10s, which can
be an issue when we connect/disconnect a display quickly or the device
on the other end only issues a hotplug pulse (for example on EDID
change).
Switch the driver to rely on the internal controller logic for the
BCM2711/RPi4.
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210524132018.264396-1-maxime@cerno.tech
This patch adds missing MODULE_DEVICE_TABLE definition which generates
correct modalias for automatic loading of this driver when it is built
as an external module.
Signed-off-by: Yu Jiahua <yujiahua1@huawei.com>
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Reviewed-by: Robert Foss <robert.foss@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210616034448.34919-1-yujiahua1@huawei.com
Syzbot reported memory leak in SocketCAN driver for Microchip CAN BUS
Analyzer Tool. The problem was in unfreed usb_coherent.
In mcba_usb_start() 20 coherent buffers are allocated and there is
nothing, that frees them:
1) In callback function the urb is resubmitted and that's all
2) In disconnect function urbs are simply killed, but URB_FREE_BUFFER
is not set (see mcba_usb_start) and this flag cannot be used with
coherent buffers.
Fail log:
| [ 1354.053291][ T8413] mcba_usb 1-1:0.0 can0: device disconnected
| [ 1367.059384][ T8420] kmemleak: 20 new suspected memory leaks (see /sys/kernel/debug/kmem)
So, all allocated buffers should be freed with usb_free_coherent()
explicitly
NOTE:
The same pattern for allocating and freeing coherent buffers
is used in drivers/net/can/usb/kvaser_usb/kvaser_usb_core.c
Fixes: 51f3baad7d ("can: mcba_usb: Add support for Microchip CAN BUS Analyzer")
Link: https://lore.kernel.org/r/20210609215833.30393-1-paskripkin@gmail.com
Cc: linux-stable <stable@vger.kernel.org>
Reported-and-tested-by: syzbot+57281c762a3922e14dfe@syzkaller.appspotmail.com
Signed-off-by: Pavel Skripkin <paskripkin@gmail.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
On 64-bit systems, struct bcm_msg_head has an added padding of 4 bytes between
struct members count and ival1. Even though all struct members are initialized,
the 4-byte hole will contain data from the kernel stack. This patch zeroes out
struct bcm_msg_head before usage, preventing infoleaks to userspace.
Fixes: ffd980f976 ("[CAN]: Add broadcast manager (bcm) protocol")
Link: https://lore.kernel.org/r/trinity-7c1b2e82-e34f-4885-8060-2cd7a13769ce-1623532166177@3c-app-gmx-bs52
Cc: linux-stable <stable@vger.kernel.org>
Signed-off-by: Norbert Slusarek <nslusarek@gmx.net>
Acked-by: Oliver Hartkopp <socketcan@hartkopp.net>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
syzbot is reporting hung task at register_netdevice_notifier() [1] and
unregister_netdevice_notifier() [2], for cleanup_net() might perform
time consuming operations while CAN driver's raw/bcm/isotp modules are
calling {register,unregister}_netdevice_notifier() on each socket.
Change raw/bcm/isotp modules to call register_netdevice_notifier() from
module's __init function and call unregister_netdevice_notifier() from
module's __exit function, as with gw/j1939 modules are doing.
Link: https://syzkaller.appspot.com/bug?id=391b9498827788b3cc6830226d4ff5be87107c30 [1]
Link: https://syzkaller.appspot.com/bug?id=1724d278c83ca6e6df100a2e320c10d991cf2bce [2]
Link: https://lore.kernel.org/r/54a5f451-05ed-f977-8534-79e7aa2bcc8f@i-love.sakura.ne.jp
Cc: linux-stable <stable@vger.kernel.org>
Reported-by: syzbot <syzbot+355f8edb2ff45d5f95fa@syzkaller.appspotmail.com>
Reported-by: syzbot <syzbot+0f1827363a305f74996f@syzkaller.appspotmail.com>
Reviewed-by: Kirill Tkhai <ktkhai@virtuozzo.com>
Tested-by: syzbot <syzbot+355f8edb2ff45d5f95fa@syzkaller.appspotmail.com>
Tested-by: Oliver Hartkopp <socketcan@hartkopp.net>
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
This entry is for the standalone driver in drivers/dma/altera-msgdma.c
Add myself as 'Odd fixes' maintainer for this driver as i am currently
writing new code and have access to the hardware.
Add Stefan Roese as reviewer.
Signed-off-by: Olivier Dautricourt <olivier.dautricourt@orolia.com>
Acked-by: Stefan Roese <sr@denx.de>
Phone: (+49)-8142-66989-51 Fax: (+49)-8142-66989-80 Email: sr@denx.de
Link: https://lore.kernel.org/r/4258cb93e0f7ff57c4e116c3e8cd9a1a3159cec6.1623251990.git.olivier.dautricourt@orolia.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Fix function name in xilinx/xilinx_dpdma.c comment to remove
a warning found by kernel-doc.
drivers/dma/xilinx/xilinx_dpdma.c:935: warning: expecting prototype for
xilinx_dpdma_chan_no_ostand(). Prototype was for
xilinx_dpdma_chan_notify_no_ostand() instead.
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://lore.kernel.org/r/1623222893-123227-1-git-send-email-yang.lee@linux.alibaba.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The second parameter of spinlock_irq[save/restore] function is flags,
which is the last input parameter of sf_pdma_prep_dma_memcpy().
So declare local variable 'iflags' to be used as the second parameter of
spinlock_irq[save/restore] function.
Signed-off-by: Austin Kim <austin.kim@lge.com>
Link: https://lore.kernel.org/r/20210611065336.GA1121@raspberrypi
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Remove the DT-based Renesas SHDMA DMA multiplexer driver, as it is
unused. The DMA multiplexer node and one DMA controller instance were
added to the R-Mobile APE6 .dtsi file, but DMA support was never fully
enabled, cfr. commit a19788612f ("dmaengine: sh: Remove R-Mobile
APE6 support").
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/e9445a5f4ac15fc4d3b376b5e675e39f8c95b967.1623406640.git.geert+renesas@glider.be
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Remove the Renesas SHDMA Device Tree bindings, as they are unused.
The DMA multiplexer node and one DMA controller instance were added to
the R-Mobile APE6 .dtsi file, but DMA support was never fully enabled,
cfr. commit a19788612f ("dmaengine: sh: Remove R-Mobile APE6
support").
Note that the mux idea was dropped when implementing support for DMA on
R-Car Gen2, cfr. renesas,rcar-dmac.yaml.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/ba56b7199fcf3516f202389d2c8f836c9ec51e7a.1623406640.git.geert+renesas@glider.be
Signed-off-by: Vinod Koul <vkoul@kernel.org>
SM8250 seems to work just fine, so add a shiny new compatible for it.
Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20210614235358.444834-2-konrad.dybcio@somainline.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
No functional changes, just adding a new compatible for a different
SoC.
Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20210614235358.444834-1-konrad.dybcio@somainline.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Merge in support for the Arm SMMU '->probe_finalize()' implementation
callback, which is required to prevent early faults in conjunction with
Nvidia's memory controller.
* for-thierry/arm-smmu:
iommu/arm-smmu: Check smmu->impl pointer before dereferencing
iommu/arm-smmu: Implement ->probe_finalize()
Commit 28e1745b9f ("printk: rename vprintk_func to vprintk") while
improving readability by removing vprintk indirection, inadvertently
placed the EXPORT_SYMBOL() for the newly renamed function at the end
of the file.
For reader sanity, and as is convention move the EXPORT_SYMBOL()
declaration just after the end of the function.
Fixes: 28e1745b9f ("printk: rename vprintk_func to vprintk")
Signed-off-by: Punit Agrawal <punitagrawal@gmail.com>
Acked-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Acked-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Signed-off-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/20210614235635.887365-1-punitagrawal@gmail.com
Using eth_zero_addr() to assign zero address insetad of
inefficient copy from an array.
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Peng Li says:
====================
net: cosa: clean up some code style issues
This patchset clean up some code style issues.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
According to the chackpatch.pl,
no spaces is necessary at the start of a line,
no space is necessary after a cast.
Signed-off-by: Peng Li <lipeng321@huawei.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>