In vc4_atomic_commit_tail() we iterate of the set of old CRTCs, and
attempt to wait on any channels which are still in use. When we iterate
over the CRTCs, we have:
* `i` - the index of the CRTC
* `channel` - the channel a CRTC is using
When we check the channel state, we consult:
old_hvs_state->fifo_state[channel].in_use
... but when we wait for the channel, we erroneously wait on:
old_hvs_state->fifo_state[i].pending_commit
... rather than:
old_hvs_state->fifo_state[channel].pending_commit
... and this bogus access has been observed to result in boot-time hangs
on some arm64 configurations, and can be detected using KASAN. FIx this
by using the correct index.
I've tested this on a Raspberry Pi 3 model B v1.2 with KASAN.
Trimmed KASAN splat:
| ==================================================================
| BUG: KASAN: slab-out-of-bounds in vc4_atomic_commit_tail+0x1cc/0x910
| Read of size 8 at addr ffff000007360440 by task kworker/u8:0/7
| CPU: 2 PID: 7 Comm: kworker/u8:0 Not tainted 5.13.0-rc3-00009-g694c523e7267 #3
|
| Hardware name: Raspberry Pi 3 Model B (DT)
| Workqueue: events_unbound deferred_probe_work_func
| Call trace:
| dump_backtrace+0x0/0x2b4
| show_stack+0x1c/0x30
| dump_stack+0xfc/0x168
| print_address_description.constprop.0+0x2c/0x2c0
| kasan_report+0x1dc/0x240
| __asan_load8+0x98/0xd4
| vc4_atomic_commit_tail+0x1cc/0x910
| commit_tail+0x100/0x210
| ...
|
| Allocated by task 7:
| kasan_save_stack+0x2c/0x60
| __kasan_kmalloc+0x90/0xb4
| vc4_hvs_channels_duplicate_state+0x60/0x1a0
| drm_atomic_get_private_obj_state+0x144/0x230
| vc4_atomic_check+0x40/0x73c
| drm_atomic_check_only+0x998/0xe60
| drm_atomic_commit+0x34/0x94
| drm_client_modeset_commit_atomic+0x2f4/0x3a0
| drm_client_modeset_commit_locked+0x8c/0x230
| drm_client_modeset_commit+0x38/0x60
| drm_fb_helper_set_par+0x104/0x17c
| fbcon_init+0x43c/0x970
| visual_init+0x14c/0x1e4
| ...
|
| The buggy address belongs to the object at ffff000007360400
| which belongs to the cache kmalloc-128 of size 128
| The buggy address is located 64 bytes inside of
| 128-byte region [ffff000007360400, ffff000007360480)
| The buggy address belongs to the page:
| page:(____ptrval____) refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x7360
| flags: 0x3fffc0000000200(slab|node=0|zone=0|lastcpupid=0xffff)
| raw: 03fffc0000000200 dead000000000100 dead000000000122 ffff000004c02300
| raw: 0000000000000000 0000000000100010 00000001ffffffff 0000000000000000
| page dumped because: kasan: bad access detected
|
| Memory state around the buggy address:
| ffff000007360300: fa fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
| ffff000007360380: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
| >ffff000007360400: 00 00 00 00 00 00 00 fc fc fc fc fc fc fc fc fc
| ^
| ffff000007360480: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
| ffff000007360500: fa fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
| ==================================================================
Link: https://lore.kernel.org/r/4d0c8318-bad8-2be7-e292-fc8f70c198de@samsung.com
Link: https://lore.kernel.org/linux-arm-kernel/20210607151740.moncryl5zv3ahq4s@gilmour
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Reported-by: Marek Szyprowski <m.szyprowski@samsung.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: David Airlie <airlied@linux.ie>
Cc: Emma Anholt <emma@anholt.net>
Cc: Maxime Ripard <maxime@cerno.tech>
Cc: Will Deacon <will@kernel.org>
Cc: dri-devel@lists.freedesktop.org
Acked-by: Arnd Bergmann <arnd@arndb.de>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20210608085513.2069-1-mark.rutland@arm.com
The last user of clkdev_alloc() and clkdev_hw_alloc() was
removed last year, so everything now calls clkdev_create()
and clkdev_hw_create() instead.
Removing the unused functions lets the compiler optimize
the remaining ones slightly better.
Fixes: e5006671ac ("clk: versatile: Drop the legacy IM-PD1 clock code")
Reviewed-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
This option is now synonymous with CONFIG_HAVE_CLK, so use
the latter globally. Any out-of-tree platform ports that
still use a private clk_get()/clk_put() implementation should
move to CONFIG_COMMON_CLK.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Only three SoCs remain that use the custom clk_get/clk_put.
Move these over to clkdev_lookup tables as well. As before,
treat the "sys.0" and "pll.0" clocks as system-wide clocks,
and all the other ones as device specific.
The "name" field in 'struct clock' is now unused, so rename
that as well as a cleanup and to reduce the object code size.
The DEFINE_CLK macro could be changed the same way, but it
is less churn to just leave those in place, that can be
done as a follow-up later if someone is interested.
Acked-by: Greg Ungerer <gerg@linux-m68k.org>
Tested-by: Greg Ungerer <gerg@linux-m68k.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Coldfire is now the only target that implements the clk_get()/clk_put()
helpers itself rather than using the common implementation.
Most coldfire variants only have two distinct clocks and use the clk
code purely for lookup. Change those over to use clkdev_lookup instead
but leave the custom clk interface for those two clocks.
Also leave the four SoCs that have gated clocks.
Acked-by: Greg Ungerer <gerg@linux-m68k.org>
Tested-by: Greg Ungerer <gerg@linux-m68k.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
ralink only has a very trivial clock implementation, with everything
being fixed clocks.
Convert it to CONFIG_COMMON_CLK to reduce the number of platforms
that rely on legacy clocks. Of course, the clocks really should
be read from the device tree instead, but this is a step into that
direction.
This adds about 50KB to the kernel image size, which is an unfortunate
increase, but not as bad as I had feared:
text data bss dec hex filename
3778560 1582216 92256 5453032 5334e8 vmlinux-vocore-before
3822148 1601192 92304 5515644 54297c vmlinux-vocore-after
3870226 1644468 200192 5714886 5733c6 vmlinux-rt305x-before
3916727 1668404 200240 5785371 58471b vmlinux-rt305x-after
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Perform a minimal conversion of the ar7 clock implementation to the common
clock framework. While the hardware can control the rates, this is left
unchanged, and all clocks are registered as fixed-rate or fixed-divider
clocks. Similarly, the clkdev lookup information is left unchanged but
moved from the table format into individual allocations.
There is a small increase in code size:
text data bss dec hex filename
4757116 596640 91328 5445084 5315dc vmlinux-before
4806159 602360 91344 5499863 53ebd7 vmlinux-after
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
ar7 is one of only two platforms that provide the clock interface but
implement a custom version of the clkdev_lookup code.
Change this to use the generic version instead.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
A collection of fixes and device ID updates that have come up in the
past few -rcs, none of which stand out particularly.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmC/aSwACgkQJNaLcl1U
h9DNXAf+O+fzbVOkXxp/r3yUa2VF0Zdit0R8xIcUh0k7vd+MqYECaGaKqX9sAKbn
nQFNvzcdRjkiFFgmKpy6x2kJ/OXBJbRCvC5FfAAj2cJvzw4eN03wkqaa9JuEZX1e
uJ+Ny1PELMglHqmWNC9bWnudEJoaYxpssI14u+FjOWJPzIxXSxWSGQknIG4d8/Rh
BtifoTxWxsYIbKiiNhX6Ui5zdzRl5CeTLuKoKXBQRM0ivRwPuX0Y+VW/tsNiLUBT
yN/CEEuu+GZevdHRvWEW3FwK8y7W36gueEYe7o+SFQVgyyjESnhCRdhRvo7uvzrx
e1yVEe4ky0wbyhmBR+69SugYKqd1/A==
=tHOl
-----END PGP SIGNATURE-----
Merge tag 'asoc-fix-v5.13-rc4' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus
ASoC: Fixes for v5.13
A collection of fixes and device ID updates that have come up in the
past few -rcs, none of which stand out particularly.
AM642-SK has no PCIe slot. Disable it here.
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Reviewed-by: Aswath Govindraju <a-govindraju@ti.com>
Signed-off-by: Nishanth Menon <nm@ti.com>
Link: https://lore.kernel.org/r/20210603142251.14563-6-kishon@ti.com
AM642 EVM has a x4 lane PCIe connector. Enable PCIe in RC mode here.
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Reviewed-by: Aswath Govindraju <a-govindraju@ti.com>
Signed-off-by: Nishanth Menon <nm@ti.com>
Link: https://lore.kernel.org/r/20210603142251.14563-4-kishon@ti.com
AM64 has one PCIe instance which can be configured in either
host mode (RC) or device mode (EP). Add PCIe DT node for host
mode and device mode here.
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Reviewed-by: Aswath Govindraju <a-govindraju@ti.com>
Signed-off-by: Nishanth Menon <nm@ti.com>
Link: https://lore.kernel.org/r/20210603142251.14563-3-kishon@ti.com
AM64 has one SERDES 10G instance. Add SERDES DT node for it.
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Reviewed-by: Aswath Govindraju <a-govindraju@ti.com>
Signed-off-by: Nishanth Menon <nm@ti.com>
Link: https://lore.kernel.org/r/20210603142251.14563-2-kishon@ti.com
Commit 66db854b1f ("arm64: dts: ti: k3-j721e-common-proc-board:
Configure the PCIe instances") and
commit 02c35dca2b ("arm64: dts: ti: k3-j721e: Enable Super-Speed
support for USB0") added PHY DT nodes with node name as "link"
However nodes with #phy-cells should be named 'phy' as discussed in [1].
Re-name subnodes of serdes in J721E to 'phy'.
[1] -> http://lore.kernel.org/r/20200909203631.GA3026331@bogus
Fixes: 66db854b1f ("arm64: dts: ti: k3-j721e-common-proc-board: Configure the PCIe instances")
Fixes: 02c35dca2b ("arm64: dts: ti: k3-j721e: Enable Super-Speed support for USB0")
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Reviewed-by: Aswath Govindraju <a-govindraju@ti.com>
Signed-off-by: Nishanth Menon <nm@ti.com>
Link: https://lore.kernel.org/r/20210603143427.28735-5-kishon@ti.com
Use external clock for all the SERDES used by PCIe controller. This will
make the same clock used by the local SERDES as well as the clock
provided to the PCIe connector.
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Reviewed-by: Aswath Govindraju <a-govindraju@ti.com>
Signed-off-by: Nishanth Menon <nm@ti.com>
Link: https://lore.kernel.org/r/20210603143427.28735-4-kishon@ti.com
Add #clock-cells property to serdes DT node since the serdes is also now
modeled as a clock provider and include the input clocks "pll0_refclk"
and "pll1_refclk" which are parents to the clocks modeled by serdes.
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Reviewed-by: Aswath Govindraju <a-govindraju@ti.com>
Signed-off-by: Nishanth Menon <nm@ti.com>
Link: https://lore.kernel.org/r/20210603143427.28735-3-kishon@ti.com
Rename the external refclk inputs to the SERDES from
dummy_cmn_refclk/dummy_cmn_refclk1 to cmn_refclk/cmn_refclk1
respectively. Also move the external refclk DT nodes outside the
cbass_main DT node. Since in j721e common processor board, only the
cmn_refclk1 is connected to 100MHz clock, fix the clock frequency.
Fixes: afd094ebe6 ("arm64: dts: ti: k3-j721e-main: Add WIZ and SERDES PHY nodes")
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Reviewed-by: Aswath Govindraju <a-govindraju@ti.com>
Signed-off-by: Nishanth Menon <nm@ti.com>
Link: https://lore.kernel.org/r/20210603143427.28735-2-kishon@ti.com
Some drivers require memory that is marked as EFI boot services
data. In order for this memory to not be re-used by the kernel
after ExitBootServices(), efi_mem_reserve() is used to preserve it
by inserting a new EFI memory descriptor and marking it with the
EFI_MEMORY_RUNTIME attribute.
Under SEV, memory marked with the EFI_MEMORY_RUNTIME attribute needs to
be mapped encrypted by Linux, otherwise the kernel might crash at boot
like below:
EFI Variables Facility v0.08 2004-May-17
general protection fault, probably for non-canonical address 0x3597688770a868b2: 0000 [#1] SMP NOPTI
CPU: 13 PID: 1 Comm: swapper/0 Not tainted 5.12.4-2-default #1 openSUSE Tumbleweed
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 0.0.0 02/06/2015
RIP: 0010:efi_mokvar_entry_next
[...]
Call Trace:
efi_mokvar_sysfs_init
? efi_mokvar_table_init
do_one_initcall
? __kmalloc
kernel_init_freeable
? rest_init
kernel_init
ret_from_fork
Expand the __ioremap_check_other() function to additionally check for
this other type of boot data reserved at runtime and indicate that it
should be mapped encrypted for an SEV guest.
[ bp: Massage commit message. ]
Fixes: 58c909022a ("efi: Support for MOK variable config table")
Reported-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Borislav Petkov <bp@suse.de>
Tested-by: Joerg Roedel <jroedel@suse.de>
Cc: <stable@vger.kernel.org> # 5.10+
Link: https://lkml.kernel.org/r/20210608095439.12668-2-joro@8bytes.org
Add variant to IMX8M to enable G2/HEVC codec.
Define the capabilities for the hardware up to 3840x2160.
G2 doesn't have a postprocessor, uses the same clocks and has it
own interrupt.
Signed-off-by: Benjamin Gaignard <benjamin.gaignard@collabora.com>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Reviewed-by: Ezequiel Garcia <ezequiel@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Implement all the logic to get G2 hardware decoding HEVC frames.
It supports up level 5.1 HEVC stream.
It doesn't support yet 10 bits formats or the scaling feature.
Add HANTRO HEVC dedicated control to skip some bits at the beginning
of the slice header. That is very specific to this hardware so can't
go into uapi structures. Computing the needed value is complex and requires
information from the stream that only the userland knows so let it
provide the correct value to the driver.
Signed-off-by: Benjamin Gaignard <benjamin.gaignard@collabora.com>
Co-developed-by: Adrian Ratiu <adrian.ratiu@collabora.com>
Signed-off-by: Adrian Ratiu <adrian.ratiu@collabora.com>
Co-developed-by: Ezequiel Garcia <ezequiel@collabora.com>
Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
A successfully received delayed response could anyway report a failure at
the protocol layer in the message status field.
Add a check also for this error condition.
Link: https://lore.kernel.org/r/20210608103056.3388-1-cristian.marussi@arm.com
Fixes: 58ecdf03db ("firmware: arm_scmi: Add support for asynchronous commands and delayed response")
Signed-off-by: Cristian Marussi <cristian.marussi@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Make sure that V4L2_PIX_FMT_HEVC_SLICE is correctly handled by the driver.
Signed-off-by: Benjamin Gaignard <benjamin.gaignard@collabora.com>
Reviewed-by: Ezequiel Garcia <ezequiel@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
The HEVC HANTRO driver needs to know the number of bits to skip at
the beginning of the slice header.
That is a hardware specific requirement so create a dedicated control
for this purpose.
Signed-off-by: Benjamin Gaignard <benjamin.gaignard@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
The shared memory node used for communication between the firmware and
the OS should be compatible with "arm,scmi-shmem". Add the check for the
same while parsing the node before fetching the memory regions.
Link: https://lore.kernel.org/r/20210602073851.1005607-2-sudeep.holla@arm.com
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Cristian Marussi <cristian.marussi@arm.com>
Cc: Florian Fainelli <f.fainelli@gmail.com>
Cc: Jim Quinlan <jim2101024@gmail.com>
Cc: Etienne Carriere <etienne.carriere@linaro.org>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Tested-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Cristian Marussi <cristian.marussi@arm.com>
Tested-by: Cristian Marussi <cristian.marussi@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
If the variant doesn't support postprocessed formats make sure it will
be ok.
Signed-off-by: Benjamin Gaignard <benjamin.gaignard@collabora.com>
Reviewed-by: Ezequiel Garcia <ezequiel@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Define which HEVC profiles (up to level 5.1) and features
(no scaling, no 10 bits) are supported by the driver.
Signed-off-by: Benjamin Gaignard <benjamin.gaignard@collabora.com>
Reviewed-by: Ezequiel Garcia <ezequiel@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Change hantro_codec_ops run prototype from 'void' to 'int'.
This allows the driver to cancel the job if an error occurs while configuring
the hardware.
Signed-off-by: Benjamin Gaignard <benjamin.gaignard@collabora.com>
Reviewed-by: Ezequiel Garcia <ezequiel@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Add decode params control and the associated structure to group
all the information that are needed to decode a reference frame as
is described in ITU-T Rec. H.265 section "8.3.2 Decoding process
for reference picture set".
Adapt Cedrus driver to these changes.
Signed-off-by: Benjamin Gaignard <benjamin.gaignard@collabora.com>
Reviewed-by: Ezequiel Garcia <ezequiel@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Add fields and flags as they are defined in
7.4.3.3.1 "General picture parameter set RBSP semantics of the
H.265 ITU specification.
Signed-off-by: Benjamin Gaignard <benjamin.gaignard@collabora.com>
Reviewed-by: Ezequiel Garcia <ezequiel@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Use DEVICE_ATTR_RW() helper macro instead of DEVICE_ATTR(), which is
simpler and more readable.
Due to the names of the read and write functions of the sysfs attribute is
normalized, there is a natural association.
Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
This is an NEC remote control device shipped with some Toshiba TVs.
Signed-off-by: Alexander Voronov <avv.0@ya.ru>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Hadle errors of clk_prepare_enable() in st_rc_hardware_init() and its
callers.
Found by Linux Driver Verification project (linuxtesting.org).
Signed-off-by: Evgeny Novikov <novikov@ispras.ru>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
The dvb_usb_device_properties can be const. This makes it clear that
the static can be shared across threads.
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
When the driver fails to talk with the hardware with dvb_usb_generic_rw,
it will return an error to dvb_usb_adapter_frontend_init. However, the
driver forgets to free the resource (e.g., struct cinergyt2_fe_state),
which leads to a memory leak.
Fix this by freeing struct cinergyt2_fe_state when dvb_usb_generic_rw
fails in cinergyt2_frontend_attach.
backtrace:
[<0000000056e17b1a>] kmalloc include/linux/slab.h:552 [inline]
[<0000000056e17b1a>] kzalloc include/linux/slab.h:682 [inline]
[<0000000056e17b1a>] cinergyt2_fe_attach+0x21/0x80 drivers/media/usb/dvb-usb/cinergyT2-fe.c:271
[<00000000ae0b1711>] cinergyt2_frontend_attach+0x21/0x70 drivers/media/usb/dvb-usb/cinergyT2-core.c:74
[<00000000d0254861>] dvb_usb_adapter_frontend_init+0x11b/0x1b0 drivers/media/usb/dvb-usb/dvb-usb-dvb.c:290
[<0000000002e08ac6>] dvb_usb_adapter_init drivers/media/usb/dvb-usb/dvb-usb-init.c:84 [inline]
[<0000000002e08ac6>] dvb_usb_init drivers/media/usb/dvb-usb/dvb-usb-init.c:173 [inline]
[<0000000002e08ac6>] dvb_usb_device_init.cold+0x4d0/0x6ae drivers/media/usb/dvb-usb/dvb-usb-init.c:287
Reported-by: syzbot+e1de8986786b3722050e@syzkaller.appspotmail.com
Signed-off-by: Dongliang Mu <mudongliangabcd@gmail.com>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Fix some erroneous function names in some error messages.
Remove some spurious or useless trailing and leading character in some
messages.
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Don't populate the const array fw_hdr on the stack but instead it
static. Makes the object code smaller by 5 bytes:
Before:
text data bss dec hex filename
31948 12072 64 44084 ac34 drivers/media/dvb-frontends/mxl692.o
After:
text data bss dec hex filename
31879 12136 64 44079 ac2f drivers/media/dvb-frontends/mxl692.o
(gcc version 10.3.0)
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Add XISC driver and binding files to the ISC driver entry.
Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Add driver for the extended variant of the isc, the microchip XISC
present on sama7g5 product.
[hverkuil: drop MODULE_SUPPORTED_DEVICE, no longer exists]
[hverkuil: made isc_sama7g5_config_csc et al static]
[hverkuil: made sama7g5_controller_formats et al static]
Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Add bindings for the Microchip eXtended Image Sensor Controller.
Based on the atmel,isc.yaml binding.
Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Convert the Atmel ISC to yaml binding format.
Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Remove a duplicate definition of clock max divider
Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Add support for additional formats supported by newer pipelines, and for
additional pipeline modules.
Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Add additional fields for registers present in sama7g5 type pipeline.
Extend register masks for additional bits in sama7g5 type pipeline registers.
Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Once the pipeline is set in the base code, create a callback that will adapt
the ISC pipeline to each product.
Create the adapt_pipeline callback that will be used in this fashion.
[hverkuil: made isc_sama5d2_adapt_pipeline static]
Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
The list of input and output formats has to be product specific.
Move this list into the product specific code.
Have pointers to these arrays inside the device struct.
Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
The RLP submodule is a part of the atmel-isc pipeline, and stands for
Rounding,Limiting and Packaging. It used to extract specific data from the
ISC pipeline. For example if we want to output greyscale 8 bit, we would
use limiting to 8 bits, and packaging to Luma component only.
Create a product specific callback for initializing the RLP submodule
of the pipeline
[hverkuil: made isc_sama5d2_config_rlp static]
Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
SMCCC v1.2 requires that all SVE state be preserved over SMC calls which
introduces substantial overhead in the common case where there is no SVE
state in the registers. To avoid this SMCCC v1.3 introduces a flag which
allows the caller to say that there is no state that needs to be preserved
in the registers. Make use of this flag, setting it if the SMCCC version
indicates support for it and the TIF_ flags indicate that there is no live
SVE state in the registers, this avoids placing any constraints on when
SMCCC calls can be done or triggering extra saving and reloading of SVE
register state in the kernel.
This would be straightforward enough except for the rather entertaining
inline assembly we use to do SMCCC v1.1 calls to allow us to take advantage
of the limited number of registers it clobbers. Deal with this by having a
function which we call immediately before issuing the SMCCC call to make
our checks and set the flag. Using alternatives the overhead if SVE is
supported but not detected at runtime can be reduced to a single NOP.
Signed-off-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20210603184118.15090-1-broonie@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
R-Car M3-W ES3.0 is marketed as R-Car M3-W+ (R8A77961), and has its own
compatible value "renesas,r8a77961".
Hence using soc_device_match() with soc_id = "r8a7796" and revision =
"ES3.*" does not actually match running on an R-Car M3-W+ SoC.
Fix this by matching with soc_id = "r8a77961" instead.
Fixes: a38c078fea ("mmc: renesas_sdhi: Avoid bad TAP in HS400")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Link: https://lore.kernel.org/r/ee8af5d631f5331139ffea714539030d97352e93.1622811525.git.geert+renesas@glider.be
Cc: stable@vger.kernel.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>