Fix the following make W=1 kernel build warnings:
drivers/base/power/domain_governor.c:259: warning: Function parameter or member 'now' not described in '_default_power_down_ok'
drivers/base/power/domain.c:581: warning: Function parameter or member 'depth' not described in 'genpd_power_off'
drivers/base/power/domain.c:2520: warning: Function parameter or member 'np' not described in 'of_genpd_remove_last'
drivers/base/power/domain.c:2520: warning: Excess function parameter 'provider' description in 'of_genpd_remove_last'
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Commit 4782c0a5dd ("clk: tegra: Don't deassert reset on enabling
clocks") removed some legacy code for handling resets on Tegra from
within the Tegra clock code. This exposed an issue in the Tegra20 slink
driver where the SPI controller reset was not being deasserted as needed
during probe. This is causing the Tegra30 Cardhu platform to hang on
boot. Fix this by ensuring the SPI controller reset is deasserted during
probe.
Fixes: 4782c0a5dd ("clk: tegra: Don't deassert reset on enabling clocks")
Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
Link: https://lore.kernel.org/r/20210608071518.93037-1-jonathanh@nvidia.com
Signed-off-by: Mark Brown <broonie@kernel.org>
According to the datasheet:
REGISTER DETAILS − 0x02 BUCK, BUCK_OUT is BIT0 ~ BIT7.
So vsel_mask for FAN53880_BUCK should be 0xFF.
Fixes: e6dea51e2d ("regulator: fan53880: Add initial support")
Signed-off-by: Axel Lin <axel.lin@ingics.com>
Link: https://lore.kernel.org/r/20210607142907.1599905-1-axel.lin@ingics.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The content of bd71815_regulators is never changed, no need to duplicate
it, thus remove descs[BD71815_REGULATOR_CNT].
The *regmap, *dev and *rdev[BD71815_REGULATOR_CNT] are not really needed.
The *gps is unused.
Thus the struct bd71815_pmic can be removed.
Signed-off-by: Axel Lin <axel.lin@ingics.com>
Reviewed-by: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>
Link: https://lore.kernel.org/r/20210607143002.1600017-1-axel.lin@ingics.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Use regulator_set_ramp_delay_regmap instead of open-coded
LTC3589_LINEAR_REG() no longer call LTC3589_REG() now.
Only LTC3589_LINEAR_REG() needs to set go_bit, thus remove go_bit
parameter from LTC3589_REG() macro.
Signed-off-by: Axel Lin <axel.lin@ingics.com>
Link: https://lore.kernel.org/r/20210604115803.1260976-1-axel.lin@ingics.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Modern ethernet phys support the so-called clause-45 register access
mode, which allows for register address widths of 16 bit.
Also allow for 16-bit register address widths, and return a regmap for
clause-45 access in that case.
Signed-off-by: Sander Vanheule <sander@svanheule.net>
Link: https://lore.kernel.org/r/9cc263e3e7d5865edd90453b4183f1cf363cb636.1622743333.git.sander@svanheule.net
Signed-off-by: Mark Brown <broonie@kernel.org>
Currently a regmap configuration for regmap-mdio must have a register
address width of 5 bits (cf. clause-22 register access). This is not
enforced on the provided register addresses, which would enable
clause-45 MDIO bus access, if the right bit packing is used.
Prevent clause-45 access, and other invalid addresses, by masking the
provided register address.
Signed-off-by: Sander Vanheule <sander@svanheule.net>
Link: https://lore.kernel.org/r/f7013f67e6d6ff56ec98660f18320f6ffcc1a777.1622743333.git.sander@svanheule.net
Signed-off-by: Mark Brown <broonie@kernel.org>
snd_soc_runtime_get_dai_fmt() is using discriminatory terms.
This patch fixup it.
Fixes: ba9e82a1c8 ("ASoC: soc-core: add snd_soc_runtime_get_dai_fmt()")
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/874ke9dxkp.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
If an error occurs after a successful 'of_iomap()' call, it must be undone
by a corresponding 'iounmap()' call, as already done in the remove
function.
While at it, remove the useless initialization of 'ret' at the beginning of
the function.
Fixes: 4bd8597dc3 ("ASoC: mediatek: add btcvsd driver")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://lore.kernel.org/r/0c2ba562c3364e61bfbd5b3013a99dfa0d9045d7.1622989685.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Mark Brown <broonie@kernel.org>
We currently only hangle rt711->regmap in rt711_sdca_io_init(), and
rt711->mbq_regmap is missing.
Fixes: 7ad4d237e7 ('ASoC: rt711-sdca: Add RT711 SDCA vendor-specific driver')
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20210607222239.582139-16-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
SDW_SDCA_CTL() registers are used but are not set to readable.
Fixes: 7ad4d237e7 ('ASoC: rt711-sdca: Add RT711 SDCA vendor-specific driver')
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20210607222239.582139-15-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
RT5682_DEVICE_ID is a volatile register, we can not read it in cache
only mode.
Fixes: 03f6fc6de9 ("ASoC: rt5682: Add the soundwire support")
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20210607222239.582139-14-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The device checking error should be a jump to pm_runtime_put_autosuspend()
as done before returning value.
Fixes: 867f8d18df ('ASoC: rt5682: fix getting the wrong device id when the suspend_stress_test')
Reviewed-by: Bard Liao <bard.liao@intel.com>
Signed-off-by: Oder Chiou <oder_chiou@realtek.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20210607222239.582139-13-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Fix clock stop prepare timeout issue (#2853).
The trigger of internal circuit which belong to
“SDCA preset stuffs” was not set correctly in previous driver,
which could block clock_stop_preparation state.
Add the correct register setting to fix it.
Fixes: 20d17057f0 ('ASoC: rt715-sdca: Add RT715 sdca vendor-specific driver')
Signed-off-by: Jack Yu <jack.yu@realtek.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20210607222239.582139-12-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Using list_move() instead of list_del() + list_add(), shorter,
equivalent.
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Zou Wei <zou_wei@huawei.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/1623113566-49455-1-git-send-email-zou_wei@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The intent of the status check on resume was to verify if a SoundWire
peripheral reported ATTACHED before waiting for the initialization to
complete. This is required to avoid timeouts that will happen with
'ghost' devices that are exposed in the platform firmware but are not
populated in hardware.
Unfortunately we used 'hw_init' instead of 'first_hw_init'. Due to
another error, the resume operation never timed out, but the volume
settings were not properly restored.
BugLink: https://github.com/thesofproject/linux/issues/2908
BugLink: https://github.com/thesofproject/linux/issues/2637
Fixes: d1ede0641b ('ASoC: rt715: add RT715 codec driver')
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Reviewed-by: Bard Liao <bard.liao@intel.com>
Link: https://lore.kernel.org/r/20210607222239.582139-11-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The intent of the status check on resume was to verify if a SoundWire
peripheral reported ATTACHED before waiting for the initialization to
complete. This is required to avoid timeouts that will happen with
'ghost' devices that are exposed in the platform firmware but are not
populated in hardware.
Unfortunately we used 'hw_init' instead of 'first_hw_init'. Due to
another error, the resume operation never timed out, but the volume
settings were not properly restored.
This patch renames the status flag to 'first_hw_init' for consistency
with other drivers (was 'first_init')
BugLink: https://github.com/thesofproject/linux/issues/2908
BugLink: https://github.com/thesofproject/linux/issues/2637
Fixes: 20d17057f0 ('ASoC: rt715-sdca: Add RT715 sdca vendor-specific driver')
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Reviewed-by: Bard Liao <bard.liao@intel.com>
Link: https://lore.kernel.org/r/20210607222239.582139-10-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The intent of the status check on resume was to verify if a SoundWire
peripheral reported ATTACHED before waiting for the initialization to
complete. This is required to avoid timeouts that will happen with
'ghost' devices that are exposed in the platform firmware but are not
populated in hardware.
Unfortunately we used 'hw_init' instead of 'first_hw_init'. Due to
another error, the resume operation never timed out, but the volume
settings were not properly restored.
BugLink: https://github.com/thesofproject/linux/issues/2908
BugLink: https://github.com/thesofproject/linux/issues/2637
Fixes: 320b8b0d13 ('ASoC: rt711: add rt711 codec driver')
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Reviewed-by: Bard Liao <bard.liao@intel.com>
Link: https://lore.kernel.org/r/20210607222239.582139-9-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The intent of the status check on resume was to verify if a SoundWire
peripheral reported ATTACHED before waiting for the initialization to
complete. This is required to avoid timeouts that will happen with
'ghost' devices that are exposed in the platform firmware but are not
populated in hardware.
Unfortunately we used 'hw_init' instead of 'first_hw_init'. Due to
another error, the resume operation never timed out, but the volume
settings were not properly restored.
BugLink: https://github.com/thesofproject/linux/issues/2908
BugLink: https://github.com/thesofproject/linux/issues/2637
Fixes: 7ad4d237e7 ('ASoC: rt711-sdca: Add RT711 SDCA vendor-specific driver')
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Reviewed-by: Bard Liao <bard.liao@intel.com>
Link: https://lore.kernel.org/r/20210607222239.582139-8-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The intent of the status check on resume was to verify if a SoundWire
peripheral reported ATTACHED before waiting for the initialization to
complete. This is required to avoid timeouts that will happen with
'ghost' devices that are exposed in the platform firmware but are not
populated in hardware.
Unfortunately we used 'hw_init' instead of 'first_hw_init'. Due to
another error, the resume operation never timed out, but the volume
settings were not properly restored.
BugLink: https://github.com/thesofproject/linux/issues/2908
BugLink: https://github.com/thesofproject/linux/issues/2637
Fixes: 7d2a5f9ae4 ('ASoC: rt700: add rt700 codec driver')
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Reviewed-by: Bard Liao <bard.liao@intel.com>
Link: https://lore.kernel.org/r/20210607222239.582139-7-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The intent of the status check on resume was to verify if a SoundWire
peripheral reported ATTACHED before waiting for the initialization to
complete. This is required to avoid timeouts that will happen with
'ghost' devices that are exposed in the platform firmware but are not
populated in hardware.
Unfortunately we used 'hw_init' instead of 'first_hw_init'. Due to
another error, the resume operation never timed out, but the volume
settings were not properly restored.
BugLink: https://github.com/thesofproject/linux/issues/2908
BugLink: https://github.com/thesofproject/linux/issues/2637
Fixes: 03f6fc6de9 ('ASoC: rt5682: Add the soundwire support')
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Reviewed-by: Bard Liao <bard.liao@intel.com>
Link: https://lore.kernel.org/r/20210607222239.582139-6-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The intent of the status check on resume was to verify if a SoundWire
peripheral reported ATTACHED before waiting for the initialization to
complete. This is required to avoid timeouts that will happen with
'ghost' devices that are exposed in the platform firmware but are not
populated in hardware.
Unfortunately we used 'hw_init' instead of 'first_hw_init'. Due to
another error, the resume operation never timed out, but the volume
settings were not properly restored.
BugLink: https://github.com/thesofproject/linux/issues/2908
BugLink: https://github.com/thesofproject/linux/issues/2637
Fixes: 2b719fd20f ('ASoC: rt1316: Add RT1316 SDCA vendor-specific driver')
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Reviewed-by: Bard Liao <bard.liao@intel.com>
Link: https://lore.kernel.org/r/20210607222239.582139-5-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The intent of the status check on resume was to verify if a SoundWire
peripheral reported ATTACHED before waiting for the initialization to
complete. This is required to avoid timeouts that will happen with
'ghost' devices that are exposed in the platform firmware but are not
populated in hardware.
Unfortunately we used 'hw_init' instead of 'first_hw_init'. Due to
another error, the resume operation never timed out, but the volume
settings were not properly restored.
BugLink: https://github.com/thesofproject/linux/issues/2908
BugLink: https://github.com/thesofproject/linux/issues/2637
Fixes: a87a6653a2 ('ASoC: rt1308-sdw: add rt1308 SdW amplifier driver')
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Reviewed-by: Bard Liao <bard.liao@intel.com>
Link: https://lore.kernel.org/r/20210607222239.582139-4-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The intent of the status check on resume was to verify if a SoundWire
peripheral reported ATTACHED before waiting for the initialization to
complete. This is required to avoid timeouts that will happen with
'ghost' devices that are exposed in the platform firmware but are not
populated in hardware.
Unfortunately we used 'hw_init' instead of 'first_hw_init'. Due to
another error, the resume operation never timed out, but the volume
settings were not properly restored.
This patch renames the status flag to 'first_hw_init' for consistency
with other drivers.
BugLink: https://github.com/thesofproject/linux/issues/2637
Fixes: 56a5b7910e ('ASoC: codecs: max98373: add SoundWire support')
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Reviewed-by: Bard Liao <bard.liao@intel.com>
Link: https://lore.kernel.org/r/20210607222239.582139-3-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
We have to bring the eMMC from sending-data state back to transfer state
once we detected a CRC error (timeout) during tuning. So, send a stop
command via mmc_abort_tuning().
Fixes: 4f11997773 ("mmc: tmio: Add tuning support")
Reported-by Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Tested-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Link: https://lore.kernel.org/r/20210602073435.5955-1-wsa+renesas@sang-engineering.com
Cc: stable@vger.kernel.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
A recent commit introduced this section mismatch warning:
WARNING: modpost: vmlinux.o(.text.unlikely+0x22a1f): Section mismatch in reference from the function detect_ivrs() to the variable .init.data:amd_iommu_force_enable
The reason is that detect_ivrs() is not marked __init while it should
be, because it is only called from another __init function. Mark
detect_ivrs() __init to get rid of the warning.
Fixes: b1e650db2c ("iommu/amd: Add amd_iommu=force_enable option")
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Link: https://lore.kernel.org/r/20210608122843.8413-1-joro@8bytes.org
The GAM submodule is a part of the atmel-isc pipeline, and stands for
Gamma Correction. It is used to apply the gamma curve to the incoming pixels.
Create a product specific callback for initializing the GAM submodule
of the pipeline.
For sama5d2 product, there is no special configuration at this moment,
thus this function is a noop.
[hverkuil: made isc_sama5d2_config_gam static]
Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
The DPC submodule is a part of the atmel-isc pipeline, and stands for
Defective Pixel Correction. Its purpose is to detect defective pixels and
correct them if possible with the help of adjacent pixels.
Create a product specific callback for initializing the DPC submodule
of the pipeline.
For sama5d2 product, this module does not exist, thus this function is a noop.
[hverkuil: made isc_sama5d2_config_dpc static]
Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Create product specific callback for initializing v4l2 controls.
Call this from v4l2 controls init function.
[hverkuil: made isc_sama5d2_config_ctrls static]
Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Compiling the recent dma-iommu changes under 32-bit x86 triggers this
compile warning:
drivers/iommu/dma-iommu.c:249:5: warning: format ‘%llx’ expects argument of type ‘long long unsigned int’, but argument 3 has type ‘phys_addr_t’ {aka ‘unsigned int’} [-Wformat=]
The reason is that %llx is used to print a variable of type
phys_addr_t. Fix it by using the correct %pa format specifier for
phys_addr_t.
Cc: Srinath Mannam <srinath.mannam@broadcom.com>
Cc: Robin Murphy <robin.murphy@arm.com>
Cc: Oza Pawandeep <poza@codeaurora.org>
Fixes: 571f316074 ("iommu/dma: Fix IOVA reserve dma ranges")
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Link: https://lore.kernel.org/r/20210607124905.27525-1-joro@8bytes.org
The only place of_iommu.h is needed is in drivers/of/device.c. Remove it
from everywhere else.
Cc: Will Deacon <will@kernel.org>
Cc: Robin Murphy <robin.murphy@arm.com>
Cc: Joerg Roedel <joro@8bytes.org>
Cc: Rob Clark <robdclark@gmail.com>
Cc: Marek Szyprowski <m.szyprowski@samsung.com>
Cc: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Cc: Bjorn Andersson <bjorn.andersson@linaro.org>
Cc: Yong Wu <yong.wu@mediatek.com>
Cc: Matthias Brugger <matthias.bgg@gmail.com>
Cc: Heiko Stuebner <heiko@sntech.de>
Cc: Jean-Philippe Brucker <jean-philippe@linaro.org>
Cc: Frank Rowand <frowand.list@gmail.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: iommu@lists.linux-foundation.org
Signed-off-by: Rob Herring <robh@kernel.org>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Acked-by: Heiko Stuebner <heiko@sntech.de>
Link: https://lore.kernel.org/r/20210527193710.1281746-2-robh@kernel.org
Signed-off-by: Joerg Roedel <jroedel@suse.de>
of_get_dma_window() was added in 2012 and removed in 2014 in commit
8918465163 ("memory: Add NVIDIA Tegra memory controller support").
Remove it and simplify the header to use forward declarations for
structs rather than includes.
Cc: Joerg Roedel <joro@8bytes.org>
Cc: Will Deacon <will@kernel.org>
Cc: Frank Rowand <frowand.list@gmail.com>
Cc: iommu@lists.linux-foundation.org
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20210527193710.1281746-1-robh@kernel.org
Signed-off-by: Joerg Roedel <jroedel@suse.de>
It is not necessary to put free_iova_mem() inside of spinlock/unlock
iova_rbtree_lock which only leads to more completion for the spinlock.
It has a small promote on the performance after the change. And also
rename private_free_iova() as remove_iova() because the function will not
free iova after that change.
Signed-off-by: Xiang Chen <chenxiang66@hisilicon.com>
Reviewed-by: John Garry <john.garry@huawei.com>
Acked-by: Robin Murphy <robin.murphy@arm.com>
Link: https://lore.kernel.org/r/1620647582-194621-1-git-send-email-chenxiang66@hisilicon.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
The CC submodule is a part of the atmel-isc pipeline, and stands for
Color Correction. It is used to apply gains and offsets to the
chroma (U, V) components of the YUV elements.
Implement the CC submodule initialization, as a product
specific function, which currently configures the neutral point in color
correction.
[hverkuil: made isc_sama5d2_config_cc static]
Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Fix IOVA reserve failure in the case when address of first memory region
listed in dma-ranges is equal to 0x0.
Fixes: aadad097cd ("iommu/dma: Reserve IOVA for PCIe inaccessible DMA address")
Signed-off-by: Srinath Mannam <srinath.mannam@broadcom.com>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Tested-by: Sven Peter <sven@svenpeter.dev>
Link: https://lore.kernel.org/r/20200914072319.6091-1-srinath.mannam@broadcom.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Newer ISC pipelines have the additional modules of
Defective Pixel Correction -> DPC itself,
Defective Pixel Correction -> Green Disparity Correction (DPC_GDC)
Defective Pixel Correction -> Black Level Correction (DPC_BLC)
Vertical and Horizontal Scaler -> VHXS
Some products have this full pipeline (sama7g5), other products do not (sama5d2)
Add the modules to the isc base, and also extend the register range to include
the modules.
Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Enable support for audio-graph based sound card on Jetson Xavier NX.
Following I/O interfaces are enabled.
- I2S3 and I2S5
- DMIC1, DMIC2 and DMIC4
- DSPK1 and DSPK2
Signed-off-by: Sameer Pujar <spujar@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Add register description for additional pipeline modules: the
Defective Pixel Correction (DPC) and the Vertical and Horizontal Scaler(VHXS)
Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
GDB produces the following warning when debugging kernels built with
CONFIG_RELR:
BFD: /android0/linux-next/vmlinux: unknown type [0x13] section `.relr.dyn'
when loading a kernel built with CONFIG_RELR into GDB. It can also
prevent debugging symbols using such relocations.
Peter sugguests:
[That flag] means that lld will use dynamic tags and section type
numbers in the OS-specific range rather than the generic range. The
kernel itself doesn't care about these numbers; it determines the
location of the RELR section using symbols defined by a linker script.
Link: https://github.com/ClangBuiltLinux/linux/issues/1057
Suggested-by: Peter Collingbourne <pcc@google.com>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Nick Desaulniers <ndesaulniers@google.com>
Link: https://lore.kernel.org/r/20210522012626.2811297-1-ndesaulniers@google.com
Signed-off-by: Will Deacon <will@kernel.org>
Add support for retrieving the mux configuration from the hardware
when the driver is initialising. Previously the ALSA controls were
initialised to a default hard-coded state instead of being initialised
to match the hardware state.
Fixes: 9e4d5c1be2 ("ALSA: usb-audio: Scarlett Gen 2 mixer interface")
Suggested-by: Vladimir Sadovnikov <sadko4u@gmail.com>
Tested-by: Markus Schroetter <project.m.schroetter@gmail.com>
Tested-by: Alex Fellows <alex.fellows@gmail.com>
Tested-by: Daniel Sales <daniel.sales.z@gmail.com>
Signed-off-by: Geoffrey D. Bennett <g@b4.vu>
Link: https://lore.kernel.org/r/15b17c60a2bca174bcddcec41c9419b746f21c1d.1623091570.git.g@b4.vu
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Add support for reading the mixer volumes from the hardware when the
driver is initialising. Previously these ALSA volume controls were
initialised to zero instead of being initialised to match the hardware
state.
Fixes: 9e4d5c1be2 ("ALSA: usb-audio: Scarlett Gen 2 mixer interface")
Suggested-by: Vladimir Sadovnikov <sadko4u@gmail.com>
Tested-by: Markus Schroetter <project.m.schroetter@gmail.com>
Tested-by: Alex Fellows <alex.fellows@gmail.com>
Tested-by: Daniel Sales <daniel.sales.z@gmail.com>
Signed-off-by: Geoffrey D. Bennett <g@b4.vu>
Link: https://lore.kernel.org/r/bb33fa9b79efc6f7a0f0e6fb7018cc8d4d59b3ba.1623091570.git.g@b4.vu
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The HP ZBook Power G8 using ALC236 codec which using 0x02 to
control mute LED and 0x01 to control micmute LED.
Therefore, add a quirk to make it works.
Signed-off-by: Jeremy Szu <jeremy.szu@canonical.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20210608114750.32009-1-jeremy.szu@canonical.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
There are 2 issues on this machine, the 1st one is mic's plug/unplug
can't be detected, that is because the mic is set to manual detecting
mode, need to apply ALC255_FIXUP_XIAOMI_HEADSET_MIC to set it to auto
detecting mode. The other one is headphone's plug/unplug can't be
detected by pulseaudio, that is because the pulseaudio will use
ucm2/sof-hda-dsp on this machine, and the ucm2 only handle
'Headphone Jack', but on this machine the headphone's pincfg sets the
location to Front, then the alsa mixer name is "Front Headphone Jack"
instead of "Headphone Jack", so override the pincfg to change location
to Left.
BugLink: http://bugs.launchpad.net/bugs/1930188
Cc: <stable@vger.kernel.org>
Signed-off-by: Hui Wang <hui.wang@canonical.com>
Link: https://lore.kernel.org/r/20210608024600.6198-1-hui.wang@canonical.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
These are only put in an array of pointers to const attribute_group
structs. Make them const like the other static attribute_group structs
to allow the compiler to put them in read-only memory.
Signed-off-by: Rikard Falkeborn <rikard.falkeborn@gmail.com>
Link: https://lore.kernel.org/r/20210605221514.73449-1-rikard.falkeborn@gmail.com
Signed-off-by: Will Deacon <will@kernel.org>
The 'fsl,ssi' documentation doesn't say anything about specifying this.
Signed-off-by: Robin van der Gracht <robin@protonic.nl>
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
According to Documentation/devicetree/bindings/sound/fsl,ssi.txt
'fsl,mode' should be specified for AC97 mode only.
Signed-off-by: Robin van der Gracht <robin@protonic.nl>
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
interrupt-counter is mainline now, so we can add missing counter nodes.
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>