Commit graph

1,044,825 commits

Author SHA1 Message Date
Geert Uytterhoeven
d82b924103 pinctrl: renesas: r8a77990: Drop bogus PUEN_ prefixes in comments
The "PUEN_" prefixes are part of the bit names of the PUEN registers,
while the comments should refer to the actual pin names.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Link: https://lore.kernel.org/r/9ea85ae8973f6d9b3d10f02f0d9b4ab6a086ec63.1619785375.git.geert+renesas@glider.be
2021-05-11 10:04:42 +02:00
Geert Uytterhoeven
702a5fa2fe pinctrl: renesas: r8a77990: JTAG pins do not have pull-down capabilities
Hence remove the SH_PFC_PIN_CFG_PULL_DOWN flags from their pin
descriptions.

Fixes: 83f6941a42 ("pinctrl: sh-pfc: r8a77990: Add bias pinconf support")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Link: https://lore.kernel.org/r/da4b2d69955840a506412f1e8099607a0da97ecc.1619785375.git.geert+renesas@glider.be
2021-05-11 10:04:42 +02:00
Geert Uytterhoeven
2cee31cd49 pinctrl: renesas: r8a7796: Add missing bias for PRESET# pin
R-Car Gen3 Hardware Manual Errata for Rev. 0.52 of Nov 30, 2016, added
the configuration bit for bias pull-down control for the PRESET# pin on
R-Car M3-W.  Add driver support for controlling pull-down on this pin.

Fixes: 2d40bd2427 ("pinctrl: sh-pfc: r8a7796: Add bias pinconf support")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Link: https://lore.kernel.org/r/c479de5b3f235c2f7d5faea9e7e08e6fccb135df.1619785375.git.geert+renesas@glider.be
2021-05-11 10:04:42 +02:00
Geert Uytterhoeven
6bd913f54f clk: renesas: r9a06g032: Switch to .determine_rate()
As the .round_rate() callback returns a long clock rate, it cannot
return clock rates that do not fit in signed long, but do fit in
unsigned long.  Hence switch the divider clocks on RZ/N1 from the old
.round_rate() callback to the newer .determine_rate() callback, which
does not suffer from this limitation.

Note that range checking is not yet implemented.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/7a384d02b85cdaac4a0e2b357582c8244b9a6f98.1617282116.git.geert+renesas@glider.be
2021-05-11 10:00:40 +02:00
Geert Uytterhoeven
02c69593e6 clk: renesas: div6: Implement range checking
Consider the minimum and maximum clock rates imposed by clock users when
calculating the most appropriate clock rate in the .determine_rate()
callback.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/35ceb262c71f1b2e9864a39bde9dafd78b2981f4.1617281699.git.geert+renesas@glider.be
2021-05-11 09:58:13 +02:00
Geert Uytterhoeven
1c924fc679 clk: renesas: div6: Consider all parents for requested rate
Currently the .determine_rate() callback considers only the current
parent clock, limiting the range of achievable clock rates on DIV6
clocks with multiple parents, as found on SH/R-Mobile SoCs.

Extend the callback to consider all available parent clocks.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/60e639692b462f99e0b6ab868c3675b3d97dbdb0.1617281699.git.geert+renesas@glider.be
2021-05-11 09:58:13 +02:00
Geert Uytterhoeven
c9d1b58b27 clk: renesas: div6: Switch to .determine_rate()
As the .round_rate() callback returns a long clock rate, it cannot
return clock rates that do not fit in signed long, but do fit in
unsigned long.  Hence switch the DIV6 clocks on SH/R-Mobile and R-Car
SoCs from the old .round_rate() callback to the newer .determine_rate()
callback, which does not suffer from this limitation.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/7fd8c45cd8bf5c6d928ca69c8b669be35b93de09.1617281699.git.geert+renesas@glider.be
2021-05-11 09:58:13 +02:00
Geert Uytterhoeven
23b04c84e2 clk: renesas: div6: Simplify src mask handling
Simplify the handling of the register bits to select the parent clock,
by storing a bitmask instead of separate shift and width values.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/5f05a5110d222ce5a113e683fe2aa726f4100b73.1617281699.git.geert+renesas@glider.be
2021-05-11 09:58:13 +02:00
Geert Uytterhoeven
6c7bc7dbcc clk: renesas: div6: Use clamp() instead of clamp_t()
As "div" is already "unsigned int", adding "U" suffixes to the constants
"1" and "64" allows us to replace the call to clamp_t() by a call to
clamp().  This removes hidden casts, and thus helps the compiler doing a
better job at type-checking.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/2670c1e3c82a245666578cbbd1fb20d37932fd8e.1617281699.git.geert+renesas@glider.be
2021-05-11 09:58:12 +02:00
Dinghao Liu
a20a40a8bb clk: renesas: rcar-usb2-clock-sel: Fix error handling in .probe()
The error handling paths after pm_runtime_get_sync() have no refcount
decrement, which leads to refcount leak.

Signed-off-by: Dinghao Liu <dinghao.liu@zju.edu.cn>
Link: https://lore.kernel.org/r/20210415073338.22287-1-dinghao.liu@zju.edu.cn
[geert: Remove now unused variable priv]
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2021-05-11 09:57:07 +02:00
Niklas Söderlund
16927401d9 clk: renesas: r8a779a0: Add ISPCS clocks
Add support for the ISPCS clocks on R-Car V3U.

Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Link: https://lore.kernel.org/r/20210329223220.1139211-1-niklas.soderlund+renesas@ragnatech.se
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2021-05-11 09:57:07 +02:00
Geert Uytterhoeven
3a0e848458 clk: renesas: rcar-gen3: Add boost support to Z clocks
Add support for switching the Z and Z2 clocks between normal and boost
modes, by requesting clock rate changes to parent PLLs.

Inspired by a patch in the BSP by Takeshi Kihara
<takeshi.kihara.df@renesas.com>.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Stephen Boyd <sboyd@kernel.org>
Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Tested-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Link: https://lore.kernel.org/r/20210326120100.1577596-8-geert+renesas@glider.be
2021-05-11 09:57:06 +02:00
Geert Uytterhoeven
3f70795636 clk: renesas: rcar-gen3: Add custom clock for PLLs
Currently the PLLs are modeled as fixed factor clocks, based on initial
settings.  However, enabling CPU boost clock rates requires increasing
the PLL clock rates.

Add a custom clock driver to model the PLL clocks.  This will allow the
Z (CPU) clock driver to request changing the PLL clock rate.

Based on a patch in the BSP by Takeshi Kihara
<takeshi.kihara.df@renesas.com>.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Stephen Boyd <sboyd@kernel.org>
Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Tested-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Link: https://lore.kernel.org/r/20210326120100.1577596-7-geert+renesas@glider.be
2021-05-11 09:57:06 +02:00
Geert Uytterhoeven
50086045bd clk: renesas: rcar-gen3: Increase Z clock accuracy
Improve accuracy in the .determine_rate() callback for Z and Z2 clocks
by using rounded divisions.  This is similar to the calculation of rates
and multipliers in the .recalc_rate() resp. set_rate() callbacks.

Sample impact for a few requested clock rates:
  - R-Car H3:
      - Z 500 MHz:	468 MHz => 515 MHz
      - Z2 1000 MHz:	973 MHz => 1011 MHz
  - R-Car M3-W:
      - Z 500 MHz:	422 MHz => 516 MHz
      - Z2 800 MHz:	750 MHz => 788 MHz

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Stephen Boyd <sboyd@kernel.org>
Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Tested-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Link: https://lore.kernel.org/r/20210326120100.1577596-6-geert+renesas@glider.be
2021-05-11 09:57:06 +02:00
Geert Uytterhoeven
67a1b9b651 clk: renesas: rcar-gen3: Grammar s/dependent of/dependent on/
Fix grammar in comments for cpg_z_clk_set_rate().

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Stephen Boyd <sboyd@kernel.org>
Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Link: https://lore.kernel.org/r/20210326120100.1577596-5-geert+renesas@glider.be
2021-05-11 09:57:06 +02:00
Geert Uytterhoeven
c141897caa clk: renesas: rcar-gen3: Remove superfluous masking in cpg_z_clk_set_rate()
Due to the clamping of mult, "(32 - mult) << __ffs(zclk->mask)" can
never exceed the mask.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Stephen Boyd <sboyd@kernel.org>
Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Tested-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Link: https://lore.kernel.org/r/20210326120100.1577596-4-geert+renesas@glider.be
2021-05-11 09:57:06 +02:00
Geert Uytterhoeven
58effcd350 clk: renesas: rcar-gen3: Make cpg_z_clk.mask u32
cpg_z_clk.mask contains a mask for a 32-bit register.
Hence its size can be reduced from unsigned long to u32.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Stephen Boyd <sboyd@kernel.org>
Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Tested-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Link: https://lore.kernel.org/r/20210326120100.1577596-3-geert+renesas@glider.be
2021-05-11 09:57:06 +02:00
Geert Uytterhoeven
192c344e7c clk: renesas: rcar-gen3: Update Z clock rate formula in comments
The fixed divider in the calculation of the Z and Z2 clock rates was
generalized from a hardcoded value of two to a parameterized value, but
the comments were not updated accordingly.

Fixes: 20cc05ba04 ("clk: renesas: rcar-gen3: Parameterise Z and Z2 clock fixed divisor")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Stephen Boyd <sboyd@kernel.org>
Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Link: https://lore.kernel.org/r/20210326120100.1577596-2-geert+renesas@glider.be
2021-05-11 09:57:06 +02:00
Nick Desaulniers
2515dd6ce8 stack: Replace "o" output with "r" input constraint
"o" isn't a common asm() constraint to use; it triggers an assertion in
assert-enabled builds of LLVM that it's not recognized when targeting
aarch64 (though it appears to fall back to "m"). It's fixed in LLVM 13 now,
but there isn't really a good reason to use "o" in particular here. To
avoid causing build issues for those using assert-enabled builds of earlier
LLVM versions, the constraint needs changing.

Instead, if the point is to retain the __builtin_alloca(), make ptr appear
to "escape" via being an input to an empty inline asm block. This is
preferable anyways, since otherwise this looks like a dead store.

While the use of "r" was considered in

  https://lore.kernel.org/lkml/202104011447.2E7F543@keescook/

it was only tested as an output (which looks like a dead store, and wasn't
sufficient).

Use "r" as an input constraint instead, which behaves correctly across
compilers and architectures.

Fixes: 39218ff4c6 ("stack: Optionally randomize kernel stack offset each syscall")
Signed-off-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Kees Cook <keescook@chromium.org>
Tested-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Link: https://reviews.llvm.org/D100412
Link: https://bugs.llvm.org/show_bug.cgi?id=49956
Link: https://lore.kernel.org/r/20210419231741.4084415-1-keescook@chromium.org
2021-05-11 09:56:11 +02:00
Daniel Borkmann
049c4e1371 bpf: Fix alu32 const subreg bound tracking on bitwise operations
Fix a bug in the verifier's scalar32_min_max_*() functions which leads to
incorrect tracking of 32 bit bounds for the simulation of and/or/xor bitops.
When both the src & dst subreg is a known constant, then the assumption is
that scalar_min_max_*() will take care to update bounds correctly. However,
this is not the case, for example, consider a register R2 which has a tnum
of 0xffffffff00000000, meaning, lower 32 bits are known constant and in this
case of value 0x00000001. R2 is then and'ed with a register R3 which is a
64 bit known constant, here, 0x100000002.

What can be seen in line '10:' is that 32 bit bounds reach an invalid state
where {u,s}32_min_value > {u,s}32_max_value. The reason is scalar32_min_max_*()
delegates 32 bit bounds updates to scalar_min_max_*(), however, that really
only takes place when both the 64 bit src & dst register is a known constant.
Given scalar32_min_max_*() is intended to be designed as closely as possible
to scalar_min_max_*(), update the 32 bit bounds in this situation through
__mark_reg32_known() which will set all {u,s}32_{min,max}_value to the correct
constant, which is 0x00000000 after the fix (given 0x00000001 & 0x00000002 in
32 bit space). This is possible given var32_off already holds the final value
as dst_reg->var_off is updated before calling scalar32_min_max_*().

Before fix, invalid tracking of R2:

  [...]
  9: R0_w=inv1337 R1=ctx(id=0,off=0,imm=0) R2_w=inv(id=0,smin_value=-9223372036854775807 (0x8000000000000001),smax_value=9223372032559808513 (0x7fffffff00000001),umin_value=1,umax_value=0xffffffff00000001,var_off=(0x1; 0xffffffff00000000),s32_min_value=1,s32_max_value=1,u32_min_value=1,u32_max_value=1) R3_w=inv4294967298 R10=fp0
  9: (5f) r2 &= r3
  10: R0_w=inv1337 R1=ctx(id=0,off=0,imm=0) R2_w=inv(id=0,smin_value=0,smax_value=4294967296 (0x100000000),umin_value=0,umax_value=0x100000000,var_off=(0x0; 0x100000000),s32_min_value=1,s32_max_value=0,u32_min_value=1,u32_max_value=0) R3_w=inv4294967298 R10=fp0
  [...]

After fix, correct tracking of R2:

  [...]
  9: R0_w=inv1337 R1=ctx(id=0,off=0,imm=0) R2_w=inv(id=0,smin_value=-9223372036854775807 (0x8000000000000001),smax_value=9223372032559808513 (0x7fffffff00000001),umin_value=1,umax_value=0xffffffff00000001,var_off=(0x1; 0xffffffff00000000),s32_min_value=1,s32_max_value=1,u32_min_value=1,u32_max_value=1) R3_w=inv4294967298 R10=fp0
  9: (5f) r2 &= r3
  10: R0_w=inv1337 R1=ctx(id=0,off=0,imm=0) R2_w=inv(id=0,smin_value=0,smax_value=4294967296 (0x100000000),umin_value=0,umax_value=0x100000000,var_off=(0x0; 0x100000000),s32_min_value=0,s32_max_value=0,u32_min_value=0,u32_max_value=0) R3_w=inv4294967298 R10=fp0
  [...]

Fixes: 3f50f132d8 ("bpf: Verifier, do explicit ALU32 bounds tracking")
Fixes: 2921c90d47 ("bpf: Fix a verifier failure with xor")
Reported-by: Manfred Paul (@_manfp)
Reported-by: Thadeu Lima de Souza Cascardo <cascardo@canonical.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: John Fastabend <john.fastabend@gmail.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
2021-05-11 08:55:53 +02:00
Tudor Ambarus
bb4031b8af clk: Skip clk provider registration when np is NULL
commit 6579c8d97a ("clk: Mark fwnodes when their clock provider is added")
revealed that clk/bcm/clk-raspberrypi.c driver calls
devm_of_clk_add_hw_provider(), with a NULL dev->of_node, which resulted in a
NULL pointer dereference in of_clk_add_hw_provider() when calling
fwnode_dev_initialized().

Returning 0 is reducing the if conditions in driver code and is being
consistent with the CONFIG_OF=n inline stub that returns 0 when CONFIG_OF
is disabled. The downside is that drivers will maybe register clkdev lookups
when they don't need to and waste some memory.

Fixes: 6579c8d97a ("clk: Mark fwnodes when their clock provider is added")
Fixes: 3c9ea42802 ("clk: Mark fwnodes when their clock provider is added/removed")
Reported-by: Marek Szyprowski <m.szyprowski@samsung.com>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Tested-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Stephen Boyd <sboyd@kernel.org>
Reviewed-by: Saravana Kannan <saravanak@google.com>
Reviewed-by: Nicolas Saenz Julienne <nsaenz@kernel.org>
Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
Link: https://lore.kernel.org/r/20210426065618.588144-1-tudor.ambarus@microchip.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-05-11 08:47:25 +02:00
Pawel Laszczak
3b414d1b01 usb: cdnsp: Fix lack of removing request from pending list.
Patch fixes lack of removing request from ep->pending_list on failure
of the stop endpoint command. Driver even after failing this command
must remove request from ep->pending_list.
Without this fix driver can stuck in cdnsp_gadget_ep_disable function
in loop:
        while (!list_empty(&pep->pending_list)) {
                preq = next_request(&pep->pending_list);
                cdnsp_ep_dequeue(pep, preq);
        }

Fixes: 3d82904559 ("usb: cdnsp: cdns3 Add main part of Cadence USBSSP DRD Driver")
Signed-off-by: Pawel Laszczak <pawell@cadence.com>
Link: https://lore.kernel.org/r/20210420042813.34917-1-pawell@gli-login.cadence.com
Signed-off-by: Peter Chen <peter.chen@kernel.org>
2021-05-11 14:15:42 +08:00
Dinghao Liu
07adc02254 usb: cdns3: Fix runtime PM imbalance on error
When cdns3_gadget_start() fails, a pairing PM usage counter
decrement is needed to keep the counter balanced.

Signed-off-by: Dinghao Liu <dinghao.liu@zju.edu.cn>
Link: https://lore.kernel.org/r/20210412054908.7975-1-dinghao.liu@zju.edu.cn
Signed-off-by: Peter Chen <peter.chen@kernel.org>
2021-05-11 14:15:41 +08:00
Pawel Laszczak
4ae08bc23e usb: cdnsp: Useless condition has been removed
This code generates a Smatch warning:

drivers/usb/cdns3/cdnsp-mem.c:1085 cdnsp_mem_cleanup()
warn: variable dereferenced before check 'pdev->dcbaa' (see line 1067)

The unchecked dereference happens inside the function when we call:

cdnsp_free_priv_device(pdev);

But fortunately, the "pdev->dcbaa" pointer can never be NULL so it
does not lead to a runtime issue. We can just remove the NULL check
which silences the warning and makes the code consistent.

Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Pawel Laszczak <pawell@cadence.com>
Link: https://lore.kernel.org/r/20210505055854.40240-1-pawell@gli-login.cadence.com
Signed-off-by: Peter Chen <peter.chen@kernel.org>
2021-05-11 14:12:54 +08:00
Souptick Joarder
440e547dd0 usb: cdns3: Corrected comment to align with kernel-doc comment
Minor update in comment.

Signed-off-by: Souptick Joarder <jrdr.linux@gmail.com>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Link: https://lore.kernel.org/r/1619338565-4574-1-git-send-email-jrdr.linux@gmail.com
Signed-off-by: Peter Chen <peter.chen@kernel.org>
2021-05-11 14:12:53 +08:00
Zou Wei
1fd86e280d interconnect: qcom: Add missing MODULE_DEVICE_TABLE
This patch adds missing MODULE_DEVICE_TABLE definition which generates
correct modalias for automatic loading of this driver when it is built
as an external module.

Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Zou Wei <zou_wei@huawei.com>
Link: https://lore.kernel.org/r/1620704673-104205-1-git-send-email-zou_wei@huawei.com
Fixes: 976daac4a1 ("interconnect: qcom: Consolidate interconnect RPMh support")
Signed-off-by: Georgi Djakov <djakov@kernel.org>
2021-05-11 07:26:31 +03:00
Subbaraman Narayanamurthy
a00593737f interconnect: qcom: bcm-voter: add a missing of_node_put()
Add a missing of_node_put() in of_bcm_voter_get() to avoid the
reference leak.

Signed-off-by: Subbaraman Narayanamurthy <subbaram@codeaurora.org>
Reviewed-by: Matthias Kaehlcke <mka@chromium.org>
Link: https://lore.kernel.org/r/1619116570-13308-1-git-send-email-subbaram@codeaurora.org
Fixes: 976daac4a1 ("interconnect: qcom: Consolidate interconnect RPMh support")
Signed-off-by: Georgi Djakov <djakov@kernel.org>
2021-05-11 07:22:52 +03:00
Gustavo A. R. Silva
39107e8577 scsi: aacraid: Replace one-element array with flexible-array member
There is a regular need in the kernel to provide a way to declare having a
dynamically sized set of trailing elements in a structure. Kernel code
should always use “flexible array members”[1] for these cases. The older
style of one-element or zero-length arrays should no longer be used[2].

Refactor the code according to the use of a flexible-array member in struct
aac_raw_io2 instead of one-element array, and use the struct_size() helper.

Also, this helps with the ongoing efforts to enable -Warray-bounds by
fixing the following warnings:

drivers/scsi/aacraid/aachba.c: In function ‘aac_build_sgraw2’:
drivers/scsi/aacraid/aachba.c:3970:18: warning: array subscript 1 is above array bounds of ‘struct sge_ieee1212[1]’ [-Warray-bounds]
 3970 |     if (rio2->sge[j].length % (i*PAGE_SIZE)) {
      |         ~~~~~~~~~^~~
drivers/scsi/aacraid/aachba.c:3974:27: warning: array subscript 1 is above array bounds of ‘struct sge_ieee1212[1]’ [-Warray-bounds]
 3974 |     nseg_new += (rio2->sge[j].length / (i*PAGE_SIZE));
      |                  ~~~~~~~~~^~~
drivers/scsi/aacraid/aachba.c:4011:28: warning: array subscript 1 is above array bounds of ‘struct sge_ieee1212[1]’ [-Warray-bounds]
 4011 |   for (j = 0; j < rio2->sge[i].length / (pages * PAGE_SIZE); ++j) {
      |                   ~~~~~~~~~^~~
drivers/scsi/aacraid/aachba.c:4012:24: warning: array subscript 1 is above array bounds of ‘struct sge_ieee1212[1]’ [-Warray-bounds]
 4012 |    addr_low = rio2->sge[i].addrLow + j * pages * PAGE_SIZE;
      |               ~~~~~~~~~^~~
drivers/scsi/aacraid/aachba.c:4014:33: warning: array subscript 1 is above array bounds of ‘struct sge_ieee1212[1]’ [-Warray-bounds]
 4014 |    sge[pos].addrHigh = rio2->sge[i].addrHigh;
      |                        ~~~~~~~~~^~~
drivers/scsi/aacraid/aachba.c:4015:28: warning: array subscript 1 is above array bounds of ‘struct sge_ieee1212[1]’ [-Warray-bounds]
 4015 |    if (addr_low < rio2->sge[i].addrLow)
      |                   ~~~~~~~~~^~~

[1] https://en.wikipedia.org/wiki/Flexible_array_member
[2] https://www.kernel.org/doc/html/v5.9/process/deprecated.html#zero-length-and-one-element-arrays

Link: https://github.com/KSPP/linux/issues/79
Link: https://github.com/KSPP/linux/issues/109
Link: https://lore.kernel.org/lkml/60414244.ur4%2FkI+fBF1ohKZs%25lkp@intel.com/
Link: https://lore.kernel.org/r/20210421185611.GA105224@embeddedor
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Build-tested-by: kernel test robot <lkp@intel.com>
2021-05-10 22:28:31 -04:00
Asutosh Das
aef80fd1da scsi: ufs: sysfs: Resume the proper SCSI device
Resume the SCSI device described by the unit descriptor instead of the HBA.

Link: https://lore.kernel.org/r/889bb20c47cc1ae5e40390f533712b704000345b.1619223249.git.asutoshd@codeaurora.org
Reviewed-by: Adrian Hunter <adrian.hunter@intel.com>
Reviewed-by: Can Guo <cang@codeaurora.org>
Signed-off-by: Asutosh Das <asutoshd@codeaurora.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-05-10 22:28:31 -04:00
Asutosh Das
b294ff3e34 scsi: ufs: core: Enable power management for wlun
During runtime-suspend of ufs host, the SCSI devices are already suspended
and so are the queues associated with them. However, the ufs host sends SSU
(START_STOP_UNIT) to the wlun during runtime-suspend.

During the process blk_queue_enter() checks if the queue is not in suspended
state. If so, it waits for the queue to resume, and never comes out of
it. Commit 52abca64fd ("scsi: block: Do not accept any requests while
suspended") adds the check to see if the queue is in suspended state in
blk_queue_enter().

Call trace:
 __switch_to+0x174/0x2c4
 __schedule+0x478/0x764
 schedule+0x9c/0xe0
 blk_queue_enter+0x158/0x228
 blk_mq_alloc_request+0x40/0xa4
 blk_get_request+0x2c/0x70
 __scsi_execute+0x60/0x1c4
 ufshcd_set_dev_pwr_mode+0x124/0x1e4
 ufshcd_suspend+0x208/0x83c
 ufshcd_runtime_suspend+0x40/0x154
 ufshcd_pltfrm_runtime_suspend+0x14/0x20
 pm_generic_runtime_suspend+0x28/0x3c
 __rpm_callback+0x80/0x2a4
 rpm_suspend+0x308/0x614
 rpm_idle+0x158/0x228
 pm_runtime_work+0x84/0xac
 process_one_work+0x1f0/0x470
 worker_thread+0x26c/0x4c8
 kthread+0x13c/0x320
 ret_from_fork+0x10/0x18

Fix this by registering ufs device wlun as a SCSI driver and registering it
for block runtime-pm. Also make this a supplier for all other LUNs. This
way the wlun device suspends after all the consumers and resumes after HBA
resumes. This also registers a new SCSI driver for rpmb wlun. This new
driver is mostly used to clear rpmb uac.

[mkp: resolve merge conflict with 5.13-rc1 and fix doc warning]

Fixed smatch warnings:
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>

Link: https://lore.kernel.org/r/4662c462e79e3e7f541f54f88f8993f421026d83.1619223249.git.asutoshd@codeaurora.org
Reviewed-by: Adrian Hunter <adrian.hunter@intel.com>
Co-developed-by: Can Guo <cang@codeaurora.org>
Signed-off-by: Can Guo <cang@codeaurora.org>
Signed-off-by: Asutosh Das <asutoshd@codeaurora.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-05-10 22:28:20 -04:00
Steve French
2018da7d40
Merge pull request #46 from namjaejeon/cifsd-for-next
cifsd-fixes
2021-05-10 21:13:59 -05:00
Heiko Schocher
6914d1ba4d arm64: dts: imx8mp: add flexspi node
add node for the flexspi modul on imx8mp.

Signed-off-by: Heiko Schocher <hs@denx.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2021-05-11 09:52:41 +08:00
Jiapeng Chong
fd781f459b selinux: Remove redundant assignment to rc
Variable rc is set to '-EINVAL' but this value is never read as
it is overwritten or not used later on, hence it is a redundant
assignment and can be removed.

Cleans up the following clang-analyzer warning:

security/selinux/ss/services.c:2103:3: warning: Value stored to 'rc' is
never read [clang-analyzer-deadcode.DeadStores].

security/selinux/ss/services.c:2079:2: warning: Value stored to 'rc' is
never read [clang-analyzer-deadcode.DeadStores].

security/selinux/ss/services.c:2071:2: warning: Value stored to 'rc' is
never read [clang-analyzer-deadcode.DeadStores].

security/selinux/ss/services.c:2062:2: warning: Value stored to 'rc' is
never read [clang-analyzer-deadcode.DeadStores].

security/selinux/ss/policydb.c:2592:3: warning: Value stored to 'rc' is
never read [clang-analyzer-deadcode.DeadStores].

Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
2021-05-10 21:48:11 -04:00
Namjae Jeon
5ce0716593 cifsd: fix build break from asn1
build break from asn1 happened on some environment.

  CHECK   /home/smfrench/smb3-kernel/fs/cifsd/smb2misc.c
  CC [M]  /home/smfrench/smb3-kernel/fs/cifsd/asn1.o
/home/smfrench/smb3-kernel/fs/cifsd/asn1.c:21:10: fatal error:
spnego_negtokeninit.asn1.h: No such file or directory
   21 | #include "spnego_negtokeninit.asn1.h"
      |          ^~~~~~~~~~~~~~~~~~~~~~~~~~~~
compilation terminated.
make[1]: *** [scripts/Makefile.build:271:
/home/smfrench/smb3-kernel/fs/cifsd/asn1.o] Error 1
make: *** [Makefile:1857: /home/smfrench/smb3-kernel/fs/cifsd] Error 2
make: Leaving directory
'/usr/src/linux-headers-5.12.0-051200rc8-generic'

This patch fix that asn1 compiler build *.asn1 file before compiling
asn.c

Signed-off-by: Namjae Jeon <namjae.jeon@samsung.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
2021-05-11 10:46:50 +09:00
Namjae Jeon
3d47e54623 cifsd: fix WARNING: Too many leading tabs
WARNING: Too many leading tabs - consider code refactoring
3066: FILE: fs/cifsd/smb2pdu.c:2733:
+                                               if (fattr.cf_dacls)

Fix a warning from checkpatch.pl.

Signed-off-by: Namjae Jeon <namjae.jeon@samsung.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
2021-05-11 10:46:47 +09:00
Namjae Jeon
63c454f839 cifsd: fix WARNING: Possible unnecessary 'out of memory' message
WARNING: Possible unnecessary 'out of memory' message
902: FILE: fs/cifsd/smb2pdu.c:569:
+       if (!work->response_buf) {
+               ksmbd_err("Failed to allocate %zu bytes buffer\n", sz);

Fix a warning from checkpatch.pl.

Signed-off-by: Namjae Jeon <namjae.jeon@samsung.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
2021-05-11 10:46:42 +09:00
Hyunchul Lee
fad4161b5c cifsd: decoding gss token using lib/asn1_decoder.c
Decode gss token of SMB2_SESSSION_SETUP using
lib/asn1_decoder.c

Signed-off-by: Hyunchul Lee <hyc.lee@gmail.com>
Signed-off-by: Namjae Jeon <namjae.jeon@samsung.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
2021-05-11 10:46:38 +09:00
Souptick Joarder
7cffc377e1 selinux: Corrected comment to match kernel-doc comment
Minor documentation update.

Signed-off-by: Souptick Joarder <jrdr.linux@gmail.com>
Cc: Randy Dunlap <rdunlap@infradead.org>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Paul Moore <paul@paul-moore.com>
2021-05-10 21:41:52 -04:00
Uwe Kleine-König
e0cdd26af8 ARM: dts: imx25-pinfunc: Fix gpio function name for pads GPIO_[A-F]
The pinfunc definitions used GPIO_A as function instead of GPIO_1_0 as
done for all the other pins with GPIO functionality. Fix for consistency.

There are no mainline users that needs adaption.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2021-05-11 09:38:51 +08:00
Zhongjun Tan
8a922805fb selinux: delete selinux_xfrm_policy_lookup() useless argument
seliunx_xfrm_policy_lookup() is hooks of security_xfrm_policy_lookup().
The dir argument is uselss in security_xfrm_policy_lookup(). So
remove the dir argument from selinux_xfrm_policy_lookup() and
security_xfrm_policy_lookup().

Signed-off-by: Zhongjun Tan <tanzhongjun@yulong.com>
[PM: reformat the subject line]
Signed-off-by: Paul Moore <paul@paul-moore.com>
2021-05-10 21:38:31 -04:00
Tim Harvey
2b1649a83a arm64: dts: imx: Add i.mx8mm Gateworks gw7901 dts support
The Gateworks GW7901 is an ARM based single board computer (SBC)
featuring:
 - i.MX8M Mini SoC
 - LPDDR4 DRAM
 - eMMC FLASH
 - SPI FRAM
 - Gateworks System Controller (GSC)
 - Atmel ATECC Crypto Authentication
 - USB 2.0
 - Microchip GbE Switch
 - Multiple multi-protocol RS232/RS485/RS422 Serial ports
 - onboard 802.11ac WiFi / BT
 - microSD socket
 - miniPCIe socket with PCIe, USB 2.0 and dual SIM sockets
 - Wide range DC power input
 - 802.3at PoE

Signed-off-by: Tim Harvey <tharvey@gateworks.com>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2021-05-11 09:38:19 +08:00
Sahil Malhotra
c67b761aac arm64: dts: ls1028a-rdb: enable optee node
optee node was disabled by default, enabling it for ls1028a-rdb.

Signed-off-by: Michael Walle <michael@walle.cc>
Signed-off-by: Sahil Malhotra <sahil.malhotra@nxp.com>
Acked-by: Li Yang <leoyang.li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2021-05-11 09:38:19 +08:00
Uwe Kleine-König
5497bc2a2b arm64: dts: imx8mp-evk: Add PMIC device
The imx8mp-evk uses an PCA9450C as PMIC that supplies various
regulators.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2021-05-11 09:38:19 +08:00
Tim Harvey
bf36051875 dt-bindings: arm: imx: add imx8mm gw7901 support
The Gateworks GW7901 is an ARM based single board computer (SBC)
featuring:
 - i.MX8M Mini SoC
 - LPDDR4 DRAM
 - eMMC FLASH
 - SPI FRAM
 - Gateworks System Controller (GSC)
 - Atmel ATECC Crypto Authentication
 - USB 2.0
 - Microchip GbE Switch
 - Multiple multi-protocol RS232/RS485/RS422 Serial ports
 - onboard 802.11ac WiFi / BT
 - microSD socket
 - miniPCIe socket with PCIe, USB 2.0 and dual SIM sockets
 - Wide range DC power input
 - 802.3at PoE

Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2021-05-11 09:37:59 +08:00
Fabio Estevam
fd268e371c ARM: dts: imx6qdl-wandboard-revd1: Remove PAD_EIM_D22 from hog group
The MX6QDL_PAD_EIM_D22 pad is already handled in the common
imx6qdl-wandboard.dtsi file.

Remove it from the local hog group to avoid the following runtime error:

[    0.117763] imx6q-pinctrl 20e0000.pinctrl: pin MX6Q_PAD_EIM_D22 already requested by 20e0000.pinctrl; cannot claim for regulator-usbotgvbus
[    0.117785] imx6q-pinctrl 20e0000.pinctrl: pin-42 (regulator-usbotgvbus) status -22
[    0.117802] imx6q-pinctrl 20e0000.pinctrl: could not request pin 42 (MX6Q_PAD_EIM_D22) from group usbotgvbusgrp on device 20e0000.pinctrl
[    0.117822] reg-fixed-voltage regulator-usbotgvbus: Error applying setting, reverse things back
[    0.117844] reg-fixed-voltage: probe of regulator-usbotgvbus failed with error -22

Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2021-05-11 09:36:34 +08:00
Ondrej Mosnacek
e1cce3a3cb selinux: constify some avtab function arguments
This makes the code a bit easier to reason about.

Signed-off-by: Ondrej Mosnacek <omosnace@redhat.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
2021-05-10 21:35:02 -04:00
Ondrej Mosnacek
fba472bb38 selinux: simplify duplicate_policydb_cond_list() by using kmemdup()
We can do the allocation + copying of expr.nodes in one go using
kmemdup().

Signed-off-by: Ondrej Mosnacek <omosnace@redhat.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
2021-05-10 21:31:58 -04:00
Roman Gushchin
f4f809f66b cgroup: inline cgroup_task_freeze()
After the introduction of the cgroup.kill there is only one call site
of cgroup_task_freeze() left: cgroup_exit(). cgroup_task_freeze() is
currently taking rcu_read_lock() to read task's cgroup flags, but
because it's always called with css_set_lock locked, the rcu protection
is excessive.

Simplify the code by inlining cgroup_task_freeze().

v2: fix build

Signed-off-by: Roman Gushchin <guro@fb.com>
Reviewed-by: Shakeel Butt <shakeelb@google.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
2021-05-10 21:31:03 -04:00
Neil Armstrong
8562e78c0b dt-bindings: display: mediatek, hdmi: Convert to use graph schema
Update the mediatek,dpi binding to use the graph schema.

Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
2021-05-11 08:16:55 +08:00
Namjae Jeon
bcd62a3683 cifsd: fix invalid memory access in smb2_write()
Add missing fp initialzation to prevent invalid memory access in
smb2_write().

Reported-by: Coverity Scan <scan-admin@coverity.com>
Signed-off-by: Namjae Jeon <namjae.jeon@samsung.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
2021-05-10 19:15:49 -05:00