commit d3042cbe84 upstream.
The error path of copying the old config used the wrong variable in the
error message:
$ mkdir /tmp/build
$ ./tools/testing/ktest/config-bisect.pl -b /tmp/build config-good /tmp/config-bad
$ chmod 0 /tmp/build
$ ./tools/testing/ktest/config-bisect.pl -b /tmp/build config-good /tmp/config-bad good
cp /tmp/build//.config config-good.tmp ... [0 seconds] FAILED!
Use of uninitialized value $config in concatenation (.) or string at ./tools/testing/ktest/config-bisect.pl line 744.
failed to copy to config-good.tmp
When it should have shown:
failed to copy /tmp/build//.config to config-good.tmp
Cc: stable@vger.kernel.org
Cc: John 'Warthog9' Hawley <warthog9@kernel.org>
Fixes: 0f0db06599 ("ktest: Add standalone config-bisect.pl program")
Link: https://patch.msgid.link/20251203180924.6862bd26@gandalf.local.home
Reported-by: "John W. Krahn" <jwkrahn@shaw.ca>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 801f614ba2 upstream.
Some NTFS volumes failed to mount because sparse data runs were not
handled correctly during runlist unpacking. The code performed arithmetic
on the special SPARSE_LCN64 marker, leading to invalid LCN values and
mount errors.
Add an explicit check for the case described above, marking the run as
sparse without applying arithmetic.
Fixes: 736fc7bf5f ("fs: ntfs3: Fix integer overflow in run_unpack()")
Cc: stable@vger.kernel.org
Signed-off-by: Konstantin Komarov <almaz.alexandrovich@paragon-software.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit f3f9f42232 upstream.
Currently when the length of a symbol is longer than 0x7f characters,
its type shown in /proc/kallsyms can be incorrect.
I found this issue when reading the code, but it can be reproduced by
following steps:
1. Define a function which symbol length is 130 characters:
#define X13(x) x##x##x##x##x##x##x##x##x##x##x##x##x
static noinline void X13(x123456789)(void)
{
printk("hello world\n");
}
2. The type in vmlinux is 't':
$ nm vmlinux | grep x123456
ffffffff816290f0 t x123456789x123456789x123456789x12[...]
3. Then boot the kernel, the type shown in /proc/kallsyms becomes 'g'
instead of the expected 't':
# cat /proc/kallsyms | grep x123456
ffffffff816290f0 g x123456789x123456789x123456789x12[...]
The root cause is that, after commit 73bbb94466 ("kallsyms: support
"big" kernel symbols"), ULEB128 was used to encode symbol name length.
That is, for "big" kernel symbols of which name length is longer than
0x7f characters, the length info is encoded into 2 bytes.
kallsyms_get_symbol_type() expects to read the first char of the
symbol name which indicates the symbol type. However, due to the
"big" symbol case not being handled, the symbol type read from
/proc/kallsyms may be wrong, so handle it properly.
Cc: stable@vger.kernel.org
Fixes: 73bbb94466 ("kallsyms: support "big" kernel symbols")
Signed-off-by: Zheng Yejian <zhengyejian@huaweicloud.com>
Acked-by: Gary Guo <gary@garyguo.net>
Link: https://patch.msgid.link/20241011143853.3022643-1-zhengyejian@huaweicloud.com
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 4dffc9bbff upstream.
The original implementation of memcpy_sglist() was broken because it
didn't handle scatterlists that describe exactly the same memory, which
is a case that many callers rely on. The current implementation is
broken too because it calls the skcipher_walk functions which can fail.
It ignores any errors from those functions.
Fix it by replacing it with a new implementation written from scratch.
It always succeeds. It's also a bit faster, since it avoids the
overhead of skcipher_walk. skcipher_walk includes a lot of
functionality (such as alignmask handling) that's irrelevant here.
Reported-by: Colin Ian King <coking@nvidia.com>
Closes: https://lore.kernel.org/r/20251114122620.111623-1-coking@nvidia.com
Fixes: 131bdceca1 ("crypto: scatterwalk - Add memcpy_sglist")
Fixes: 0f8d42bf12 ("crypto: scatterwalk - Move skcipher walk and use it for memcpy_sglist")
Cc: stable@vger.kernel.org
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 82d2048102 upstream.
For years I wondered why the floppy driver does not just work on
sparc64, e.g:
root@SUNW_375_0066:# disktype /dev/fd0
disktype: Can't open /dev/fd0: No such device or address
[ 525.341906] disktype: attempt to access beyond end of device
fd0: rw=0, sector=0, nr_sectors = 16 limit=8
[ 525.341991] floppy: error 10 while reading block 0
Turns out floppy.c __floppy_read_block_0 tries to read one page for
the first test read to determine the disk size and thus fails if that
is greater than 4k. Adjust minimum MAX_DISK_SIZE to PAGE_SIZE to fix
floppy on sparc64 and likely all other PAGE_SIZE != 4KB configs.
Cc: stable@vger.kernel.org
Signed-off-by: René Rebe <rene@exactco.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 6abfe10789 upstream.
Copying the file system while it is mounted as read-only results in
a mount failure:
[~]# mkfs.ext4 -F /dev/sdc
[~]# mount /dev/sdc -o ro /mnt/test
[~]# dd if=/dev/sdc of=/dev/sda bs=1M
[~]# mount /dev/sda /mnt/test1
[ 1094.849826] JBD2: journal checksum error
[ 1094.850927] EXT4-fs (sda): Could not load journal inode
mount: mount /dev/sda on /mnt/test1 failed: Bad message
The process described above is just an abstracted way I came up with to
reproduce the issue. In the actual scenario, the file system was mounted
read-only and then copied while it was still mounted. It was found that
the mount operation failed. The user intended to verify the data or use
it as a backup, and this action was performed during a version upgrade.
Above issue may happen as follows:
ext4_fill_super
set_journal_csum_feature_set(sb)
if (ext4_has_metadata_csum(sb))
incompat = JBD2_FEATURE_INCOMPAT_CSUM_V3;
if (test_opt(sb, JOURNAL_CHECKSUM)
jbd2_journal_set_features(sbi->s_journal, compat, 0, incompat);
lock_buffer(journal->j_sb_buffer);
sb->s_feature_incompat |= cpu_to_be32(incompat);
//The data in the journal sb was modified, but the checksum was not
updated, so the data remaining in memory has a mismatch between the
data and the checksum.
unlock_buffer(journal->j_sb_buffer);
In this case, the journal sb copied over is in a state where the checksum
and data are inconsistent, so mounting fails.
To solve the above issue, update the checksum in memory after modifying
the journal sb.
Fixes: 4fd5ea43bc ("jbd2: checksum journal superblock")
Signed-off-by: Ye Bin <yebin10@huawei.com>
Reviewed-by: Baokun Li <libaokun1@huawei.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Jan Kara <jack@suse.cz>
Message-ID: <20251103010123.3753631-1-yebin@huaweicloud.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 3179a5f7f8 upstream.
loop devices under heavy stress-ng loop streessor can trigger many
capacity change events in a short time. Each event prints an info
message from set_capacity_and_notify(), flooding the console and
contributing to soft lockups on slow consoles.
Switch the printk in set_capacity_and_notify() to
pr_info_ratelimited() so frequent capacity changes do not spam
the log while still reporting occasional changes.
Cc: stable@vger.kernel.org
Signed-off-by: Li Chen <chenl311@chinatelecom.cn>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 4cfc7d5a4a upstream.
After commit b77b4a4815 ("gfs2: Rework freeze / thaw logic"),
the freeze error handling is broken because gfs2_do_thaw()
overwrites the 'error' variable, causing incorrect processing
of the original freeze error.
Fix this by calling gfs2_do_thaw() when gfs2_lock_fs_check_clean()
fails but ignoring its return value to preserve the original
freeze error for proper reporting.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Fixes: b77b4a4815 ("gfs2: Rework freeze / thaw logic")
Cc: stable@vger.kernel.org # v6.5+
Signed-off-by: Alexey Velichayshiy <a.velichayshiy@ispras.ru>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 0185c2292c upstream.
In our user safe ino resolve ioctl we'll just turn any ret into -EACCES
from inode_permission(). This is redundant, and could potentially be
wrong if we had an ENOMEM in the security layer or some such other
error, so simply return the actual return value.
Note: The patch was taken from v5 of fscrypt patchset
(https://lore.kernel.org/linux-btrfs/cover.1706116485.git.josef@toxicpanda.com/)
which was handled over time by various people: Omar Sandoval, Sweet Tea
Dorminy, Josef Bacik.
Fixes: 23d0b79dfa ("btrfs: Add unprivileged version of ino_lookup ioctl")
CC: stable@vger.kernel.org # 5.4+
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Daniel Vacek <neelx@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
[ add note ]
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 38b845e1f9 upstream.
The power-limits for ru and mcs and stored in the devicetree as bytewise
array (often with sizes which are not a multiple of 4). These arrays have a
prefix which defines for how many modes a line is applied. This prefix is
also only a byte - but the code still tried to fix the endianness of this
byte with a be32 operation. As result, loading was mostly failing or was
sending completely unexpected values to the firmware.
Since the other rates are also stored in the devicetree as bytewise arrays,
just drop the u32 access + be32_to_cpu conversion and directly access them
as bytes arrays.
Cc: stable@vger.kernel.org
Fixes: 22b980badc ("mt76: add functions for parsing rate power limits from DT")
Fixes: a9627d992b ("mt76: extend DT rate power limits to support 11ax devices")
Signed-off-by: Sven Eckelmann (Plasma Cloud) <se@simonwunderlich.de>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit c943bfc6af upstream.
After a copy pair swap the block device's "device" symlink points to
the secondary CCW device, but the gendisk's parent remained the
primary, leaving /sys/block/<dasdx> under the wrong parent.
Move the gendisk to the secondary's device with device_move(), keeping
the sysfs topology consistent after the swap.
Fixes: 413862caad ("s390/dasd: add copy pair swap capability")
Cc: stable@vger.kernel.org #6.1
Reviewed-by: Jan Hoeppner <hoeppner@linux.ibm.com>
Signed-off-by: Stefan Haberland <sth@linux.ibm.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 2f22115709 upstream.
In the C code, the 'inc' argument to the assembly functions
blake2s_compress_ssse3() and blake2s_compress_avx512() is declared with
type u32, matching blake2s_compress(). The assembly code then reads it
from the 64-bit %rcx. However, the ABI doesn't guarantee zero-extension
to 64 bits, nor do gcc or clang guarantee it. Therefore, fix these
functions to read this argument from the 32-bit %ecx.
In theory, this bug could have caused the wrong 'inc' value to be used,
causing incorrect BLAKE2s hashes. In practice, probably not: I've fixed
essentially this same bug in many other assembly files too, but there's
never been a real report of it having caused a problem. In x86_64, all
writes to 32-bit registers are zero-extended to 64 bits. That results
in zero-extension in nearly all situations. I've only been able to
demonstrate a lack of zero-extension with a somewhat contrived example
involving truncation, e.g. when the C code has a u64 variable holding
0x1234567800000040 and passes it as a u32 expecting it to be truncated
to 0x40 (64). But that's not what the real code does, of course.
Fixes: ed0356eda1 ("crypto: blake2s - x86_64 SIMD implementation")
Cc: stable@vger.kernel.org
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20251102234209.62133-2-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 970e1e4180 upstream.
driver_find_device() calls get_device() to increment the reference
count once a matching device is found. device_release_driver()
releases the driver, but it does not decrease the reference count that
was incremented by driver_find_device(). At the end of the loop, there
is no put_device() to balance the reference count. To avoid reference
count leakage, add put_device() to decrease the reference count.
Found by code review.
Cc: stable@vger.kernel.org
Fixes: bfc653aa89 ("perf: arm_cspmu: Separate Arm and vendor module")
Signed-off-by: Ma Ke <make24@iscas.ac.cn>
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 5e428e45bf upstream.
Commit f4fb9c4d7f ("phy: exynos5-usbdrd: allow DWC3 runtime suspend
with UDC bound (E850+)") incorrectly added clk_bulk_disable() as the
inverse of clk_bulk_prepare_enable() while it should have of course
used clk_bulk_disable_unprepare(). This means incorrect reference
counts to the CMU driver remain.
Update the code accordingly.
Fixes: f4fb9c4d7f ("phy: exynos5-usbdrd: allow DWC3 runtime suspend with UDC bound (E850+)")
CC: stable@vger.kernel.org
Signed-off-by: André Draszik <andre.draszik@linaro.org>
Reviewed-by: Sam Protsenko <semen.protsenko@linaro.org>
Reviewed-by: Peter Griffin <peter.griffin@linaro.org>
Link: https://patch.msgid.link/20251006-gs101-usb-phy-clk-imbalance-v1-1-205b206126cf@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit c57210bc15 upstream.
Add definition for display subsystem reset control, so display
driver can reset display controller properly, clearing any
configuration left there by bootloader. Since 6.17 after
PM domains rework it became necessary for display to function.
Fixes: 0e789b491b ("pmdomain: core: Leave powered-on genpds on until sync_state")
Cc: stable@vger.kernel.org # 6.17
Signed-off-by: Alexey Minnekhanov <alexeymin@postmarketos.org>
Acked-by: Krzysztof Kozlowski <krzk@kernel.org>
Link: https://lore.kernel.org/r/20251116-sdm660-mdss-reset-v2-1-6219bec0a97f@postmarketos.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit b1f856b172 upstream.
According to the hardware programming guide, the clock frequency must
remain below 52MHz during the transition to HS400 mode.
However,in the current implementation, the timing is set to HS400 (a
DDR mode) before adjusting the clock. This causes the clock to double
prematurely to 104MHz during the transition phase, violating the
specification and potentially resulting in CRC errors or CMD timeouts.
This change ensures that clock doubling is avoided during intermediate
transitions and is applied only when the card requires a 200MHz clock
for HS400 operation.
Signed-off-by: Sarthak Garg <sarthak.garg@oss.qualcomm.com>
Reviewed-by: Bjorn Andersson <andersson@kernel.org>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: stable@vger.kernel.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit d7ac083f09 upstream.
Currently, when a CMCI storm detected on a Machine Check bank, subsides, the
bank's corresponding bit in the mce_poll_banks per-CPU variable is cleared
unconditionally by cmci_storm_end().
On AMD SMCA systems, this essentially disables polling on that particular bank
on that CPU. Consequently, any subsequent correctable errors or storms will not
be logged.
Since AMD SMCA systems allow banks to be managed by both polling and
interrupts, the polling banks bitmap for a CPU, i.e., mce_poll_banks, should
not be modified when a storm subsides.
Fixes: 7eae17c4ad ("x86/mce: Add per-bank CMCI storm mitigation")
Signed-off-by: Avadhut Naik <avadhut.naik@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/20251121190542.2447913-2-avadhut.naik@amd.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit f5e1e5ec20 upstream.
move_local_task_to_local_dsq() is used when moving a task from a non-local
DSQ to a local DSQ on the same CPU. It directly manipulates the local DSQ
without going through dispatch_enqueue() and was missing the post-enqueue
handling that triggers preemption when SCX_ENQ_PREEMPT is set or the idle
task is running.
The function is used by move_task_between_dsqs() which backs
scx_bpf_dsq_move() and may be called while the CPU is busy.
Add local_dsq_post_enq() call to move_local_task_to_local_dsq(). As the
dispatch path doesn't need post-enqueue handling, add SCX_RQ_IN_BALANCE
early exit to keep consume_dispatch_q() behavior unchanged and avoid
triggering unnecessary resched when scx_bpf_dsq_move() is used from the
dispatch path.
Fixes: 4c30f5ce4f ("sched_ext: Implement scx_bpf_dispatch[_vtime]_from_dsq()")
Cc: stable@vger.kernel.org # v6.12+
Reviewed-by: Andrea Righi <arighi@nvidia.com>
Reviewed-by: Emil Tsalapatis <emil@etsalapatis.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 9f769637a9 upstream.
scx_enable() calls scx_bypass(true) to initialize in bypass mode and then
scx_bypass(false) on success to exit. If scx_enable() fails during task
initialization - e.g. scx_cgroup_init() or scx_init_task() returns an error -
it jumps to err_disable while bypass is still active. scx_disable_workfn()
then calls scx_bypass(true/false) for its own bypass, leaving the bypass depth
at 1 instead of 0. This causes the system to remain permanently in bypass mode
after a failed scx_enable().
Failures after task initialization is complete - e.g. scx_tryset_enable_state()
at the end - already call scx_bypass(false) before reaching the error path and
are not affected. This only affects a subset of failure modes.
Fix it by tracking whether scx_enable() called scx_bypass(true) in a bool and
having scx_disable_workfn() call an extra scx_bypass(false) to clear it. This
is a temporary measure as the bypass depth will be moved into the sched
instance, which will make this tracking unnecessary.
Fixes: 8c2090c504 ("sched_ext: Initialize in bypass mode")
Cc: stable@vger.kernel.org # v6.12+
Reported-by: Chris Mason <clm@meta.com>
Reviewed-by: Emil Tsalapatis <emil@etsalapatis.com>
Link: https://lore.kernel.org/stable/286e6f7787a81239e1ce2989b52391ce%40kernel.org
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 530b6637c7 upstream.
Factor out local_dsq_post_enq() which performs post-enqueue handling for
local DSQs - triggering resched_curr() if SCX_ENQ_PREEMPT is specified or if
the current CPU is idle. No functional change.
This will be used by the next patch to fix move_local_task_to_local_dsq().
Cc: stable@vger.kernel.org # v6.12+
Reviewed-by: Andrea Righi <arighi@nvidia.com>
Reviewed-by: Emil Tsalapatis <emil@etsalapatis.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 26873e3e7f upstream.
Allowing irq_work to be scheduled while trying to suspend has shown
to cause problems as some architectures interpret the pending
interrupts as a reason to not suspend. This became a problem for
printk() with the introduction of NBCON consoles. With every
printk() call, NBCON console printing kthreads are woken by queueing
irq_work. This means that irq_work continues to be queued due to
printk() calls late in the suspend procedure.
Avoid this problem by preventing printk() from queueing irq_work
once console suspending has begun. This applies to triggering NBCON
and legacy deferred printing as well as klogd waiters.
Since triggering of NBCON threaded printing relies on irq_work, the
pr_flush() within console_suspend_all() is used to perform the final
flushing before suspending consoles and blocking irq_work queueing.
NBCON consoles that are not suspended (due to the usage of the
"no_console_suspend" boot argument) transition to atomic flushing.
Introduce a new global variable @console_irqwork_blocked to flag
when irq_work queueing is to be avoided. The flag is used by
printk_get_console_flush_type() to avoid allowing deferred printing
and switch NBCON consoles to atomic flushing. It is also used by
vprintk_emit() to avoid klogd waking.
Add WARN_ON_ONCE(console_irqwork_blocked) to the irq_work queuing
functions to catch any code that attempts to queue printk irq_work
during the suspending/resuming procedure.
Cc: stable@vger.kernel.org # 6.13.x because no drivers in 6.12.x
Fixes: 6b93bb41f6 ("printk: Add non-BKL (nbcon) console basic infrastructure")
Closes: https://lore.kernel.org/lkml/DB9PR04MB8429E7DDF2D93C2695DE401D92C4A@DB9PR04MB8429.eurprd04.prod.outlook.com
Signed-off-by: John Ogness <john.ogness@linutronix.de>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Tested-by: Sherry Sun <sherry.sun@nxp.com>
Link: https://patch.msgid.link/20251113160351.113031-3-john.ogness@linutronix.de
Signed-off-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit b14fad5553 upstream.
__io_openat_prep() allocates a struct filename using getname(). However,
for the condition of the file being installed in the fixed file table as
well as having O_CLOEXEC flag set, the function returns early. At that
point, the request doesn't have REQ_F_NEED_CLEANUP flag set. Due to this,
the memory for the newly allocated struct filename is not cleaned up,
causing a memory leak.
Fix this by setting the REQ_F_NEED_CLEANUP for the request just after the
successful getname() call, so that when the request is torn down, the
filename will be cleaned up, along with other resources needing cleanup.
Reported-by: syzbot+00e61c43eb5e4740438f@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=00e61c43eb5e4740438f
Tested-by: syzbot+00e61c43eb5e4740438f@syzkaller.appspotmail.com
Cc: stable@vger.kernel.org
Signed-off-by: Prithvi Tambewagh <activprithvi@gmail.com>
Fixes: b9445598d8 ("io_uring: openat directly into fixed fd table")
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit e15cb2200b upstream.
Using min_wait, two timeouts are given:
1) The min_wait timeout, within which up to 'wait_nr' events are
waited for.
2) The overall long timeout, which is entered if no events are generated
in the min_wait window.
If the min_wait has expired, any event being posted must wake the task.
For SQPOLL, that isn't the case, as it won't trigger the io_has_work()
condition, as it will have already processed the task_work that happened
when an event was posted. This causes any event to trigger post the
min_wait to not always cause the waiting application to wakeup, and
instead it will wait until the overall timeout has expired. This can be
shown in a test case that has a 1 second min_wait, with a 5 second
overall wait, even if an event triggers after 1.5 seconds:
axboe@m2max-kvm /d/iouring-mre (master)> zig-out/bin/iouring
info: MIN_TIMEOUT supported: true, features: 0x3ffff
info: Testing: min_wait=1000ms, timeout=5s, wait_nr=4
info: 1 cqes in 5000.2ms
where the expected result should be:
axboe@m2max-kvm /d/iouring-mre (master)> zig-out/bin/iouring
info: MIN_TIMEOUT supported: true, features: 0x3ffff
info: Testing: min_wait=1000ms, timeout=5s, wait_nr=4
info: 1 cqes in 1500.3ms
When the min_wait timeout triggers, reset the number of completions
needed to wake the task. This should ensure that any future events will
wake the task, regardless of how many events it originally wanted to
wait for.
Reported-by: Tip ten Brink <tip@tenbrinkmeijs.com>
Cc: stable@vger.kernel.org
Fixes: 1100c4a265 ("io_uring: add support for batch wait timeout")
Link: https://github.com/axboe/liburing/issues/1477
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 84230ad2d2 upstream.
When the core of io_uring was updated to handle completions
consistently and with fixed return codes, the POLL_REMOVE opcode
with updates got slightly broken. If a POLL_ADD is pending and
then POLL_REMOVE is used to update the events of that request, if that
update causes the POLL_ADD to now trigger, then that completion is lost
and a CQE is never posted.
Additionally, ensure that if an update does cause an existing POLL_ADD
to complete, that the completion value isn't always overwritten with
-ECANCELED. For that case, whatever io_poll_add() set the value to
should just be retained.
Cc: stable@vger.kernel.org
Fixes: 97b388d70b ("io_uring: handle completions in the core")
Reported-by: syzbot+641eec6b7af1f62f2b99@syzkaller.appspotmail.com
Tested-by: syzbot+641eec6b7af1f62f2b99@syzkaller.appspotmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 9c75986a29 upstream.
The mmio regmap allocated during probe is never freed.
Switch to using the device managed allocator so that the regmap is
released on probe failures (e.g. probe deferral) and on driver unbind.
Fixes: a250cd4c19 ("clk: keystone: syscon-clk: Do not use syscon helper to build regmap")
Cc: stable@vger.kernel.org # 6.15
Cc: Andrew Davis <afd@ti.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 62cd5d480b upstream.
'tpm2_load_cmd' allocates a tempoary blob indirectly via 'tpm2_key_decode'
but it is not freed in the failure paths. Address this by wrapping the blob
into with a cleanup helper.
Cc: stable@vger.kernel.org # v5.13+
Fixes: f221974525 ("security: keys: trusted: use ASN.1 TPM2 key format for the blobs")
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit dfd6799304 upstream.
Resource sizes are a general concept for dealing with physical
addresses, and not specific to the Resource type, which is just one way
to access physical addresses. Thus, move the typedef to the io module.
Still keep a re-export under resource. This avoids this commit from
being a flag-day, but I also think it's a useful re-export in general so
that you can import
use kernel::io::resource::{Resource, ResourceSize};
instead of having to write
use kernel::io::{
resource::Resource,
ResourceSize,
};
in the specific cases where you need ResourceSize because you are using
the Resource type. Therefore I think it makes sense to keep this
re-export indefinitely and it is *not* intended as a temporary re-export
for migration purposes.
Cc: stable@vger.kernel.org # for v6.18 [1]
Signed-off-by: Alice Ryhl <aliceryhl@google.com>
Link: https://patch.msgid.link/20251112-resource-phys-typedefs-v2-2-538307384f82@google.com
Link: https://lore.kernel.org/all/20251112-resource-phys-typedefs-v2-0-538307384f82@google.com/ [1]
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit e2f1081ca8 upstream.
MMIO backend of PCI Bar always assumes little-endian devices and
will convert to CPU endianness automatically. Remove the u32::from_le
conversion which would cause a bug on big-endian machines.
Cc: stable@vger.kernel.org
Reviewed-by: Dirk Behme <dirk.behme@de.bosch.com>
Signed-off-by: Marko Turk <mt@markoturk.info>
Fixes: 685376d18e ("samples: rust: add Rust PCI sample driver")
Link: https://patch.msgid.link/20251210112503.62925-2-mt@markoturk.info
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit d8932355f8 upstream.
Add dma_set_mask(), dma_set_coherent_mask(), dma_map_sgtable(), and
dma_max_mapping_size() helpers to fix a build error when
CONFIG_HAS_DMA is not enabled.
Note that when CONFIG_HAS_DMA is enabled, they are included in both
bindings_generated.rs and bindings_helpers_generated.rs. The former
takes precedence so behavior remains unchanged in that case.
This fixes the following build error on UML:
error[E0425]: cannot find function `dma_set_mask` in crate `bindings`
--> rust/kernel/dma.rs:46:38
|
46 | to_result(unsafe { bindings::dma_set_mask(self.as_ref().as_raw(), mask.value()) })
| ^^^^^^^^^^^^ help: a function with a similar name exists: `xa_set_mark`
|
::: rust/bindings/bindings_generated.rs:24690:5
|
24690 | pub fn xa_set_mark(arg1: *mut xarray, index: ffi::c_ulong, arg2: xa_mark_t);
| ---------------------------------------------------------------------------- similarly named function `xa_set_mark` defined here
error[E0425]: cannot find function `dma_set_coherent_mask` in crate `bindings`
--> rust/kernel/dma.rs:63:38
|
63 | to_result(unsafe { bindings::dma_set_coherent_mask(self.as_ref().as_raw(), mask.value()) })
| ^^^^^^^^^^^^^^^^^^^^^ help: a function with a similar name exists: `dma_coherent_ok`
|
::: rust/bindings/bindings_generated.rs:52745:5
|
52745 | pub fn dma_coherent_ok(dev: *mut device, phys: phys_addr_t, size: usize) -> bool_;
| ---------------------------------------------------------------------------------- similarly named function `dma_coherent_ok` defined here
error[E0425]: cannot find function `dma_map_sgtable` in crate `bindings`
--> rust/kernel/scatterlist.rs:212:23
|
212 | bindings::dma_map_sgtable(dev.as_raw(), sgt.as_ptr(), dir.into(), 0)
| ^^^^^^^^^^^^^^^ help: a function with a similar name exists: `dma_unmap_sgtable`
|
::: rust/bindings/bindings_helpers_generated.rs:1351:5
|
1351 | / pub fn dma_unmap_sgtable(
1352 | | dev: *mut device,
1353 | | sgt: *mut sg_table,
1354 | | dir: dma_data_direction,
1355 | | attrs: ffi::c_ulong,
1356 | | );
| |______- similarly named function `dma_unmap_sgtable` defined here
error[E0425]: cannot find function `dma_max_mapping_size` in crate `bindings`
--> rust/kernel/scatterlist.rs:356:52
|
356 | let max_segment = match unsafe { bindings::dma_max_mapping_size(dev.as_raw()) } {
| ^^^^^^^^^^^^^^^^^^^^ not found in `bindings`
error: aborting due to 4 previous errors
Cc: stable@vger.kernel.org # v6.17+
Fixes: 101d66828a ("rust: dma: add DMA addressing capabilities")
Signed-off-by: FUJITA Tomonori <fujita.tomonori@gmail.com>
Reviewed-by: David Gow <davidgow@google.com>
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Link: https://patch.msgid.link/20251204160639.364936-1-fujita.tomonori@gmail.com
[ Use relative paths in the error splat; add 'dma' prefix. - Danilo ]
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 6c37bebd8c upstream.
Similar to the previous commit, List::remove is used on
delivered_deaths, so do not use mem::take on it as that may result in
violations of the List::remove safety requirements.
I don't think this particular case can be triggered because it requires
fd close to run in parallel with an ioctl on the same fd. But let's not
tempt fate.
Cc: stable@vger.kernel.org
Fixes: eafedbc7c0 ("rust_binder: add Rust Binder driver")
Signed-off-by: Alice Ryhl <aliceryhl@google.com>
Acked-by: Miguel Ojeda <ojeda@kernel.org>
Link: https://patch.msgid.link/20251111-binder-fix-list-remove-v1-2-8ed14a0da63d@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit e54ad0cd36 upstream.
Invariants should be prefixed with a # to turn it into a header.
There are no functional changes in this patch.
Cc: stable@vger.kernel.org
Fixes: c284d3e423 ("rust: drm: gem: Add GEM object abstraction")
Signed-off-by: Lyude Paul <lyude@redhat.com>
Link: https://patch.msgid.link/20251107202603.465932-1-lyude@redhat.com
Signed-off-by: Alice Ryhl <aliceryhl@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit cb6d5aa9c0 ]
In smb3_reconfigure(), if smb3_sync_session_ctx_passwords() fails, the
function returns immediately without freeing and erasing the newly
allocated new_password and new_password2. This causes both a memory leak
and a potential information leak.
Fix this by calling kfree_sensitive() on both password buffers before
returning in this error case.
Fixes: 0f0e357902 ("cifs: during remount, make sure passwords are in sync")
Signed-off-by: Zilin Guan <zilin@seu.edu.cn>
Reviewed-by: ChenXiaoSong <chenxiaosong@kylinos.cn>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d8ee3cfdc8 ]
vhost_vsock_get() uses hash_for_each_possible_rcu() to find the
`vhost_vsock` associated with the `guest_cid`. hash_for_each_possible_rcu()
should only be called within an RCU read section, as mentioned in the
following comment in include/linux/rculist.h:
/**
* hlist_for_each_entry_rcu - iterate over rcu list of given type
* @pos: the type * to use as a loop cursor.
* @head: the head for your list.
* @member: the name of the hlist_node within the struct.
* @cond: optional lockdep expression if called from non-RCU protection.
*
* This list-traversal primitive may safely run concurrently with
* the _rcu list-mutation primitives such as hlist_add_head_rcu()
* as long as the traversal is guarded by rcu_read_lock().
*/
Currently, all calls to vhost_vsock_get() are between rcu_read_lock()
and rcu_read_unlock() except for calls in vhost_vsock_set_cid() and
vhost_vsock_reset_orphans(). In both cases, the current code is safe,
but we can make improvements to make it more robust.
About vhost_vsock_set_cid(), when building the kernel with
CONFIG_PROVE_RCU_LIST enabled, we get the following RCU warning when the
user space issues `ioctl(dev, VHOST_VSOCK_SET_GUEST_CID, ...)` :
WARNING: suspicious RCU usage
6.18.0-rc7 #62 Not tainted
-----------------------------
drivers/vhost/vsock.c:74 RCU-list traversed in non-reader section!!
other info that might help us debug this:
rcu_scheduler_active = 2, debug_locks = 1
1 lock held by rpc-libvirtd/3443:
#0: ffffffffc05032a8 (vhost_vsock_mutex){+.+.}-{4:4}, at: vhost_vsock_dev_ioctl+0x2ff/0x530 [vhost_vsock]
stack backtrace:
CPU: 2 UID: 0 PID: 3443 Comm: rpc-libvirtd Not tainted 6.18.0-rc7 #62 PREEMPT(none)
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.17.0-7.fc42 06/10/2025
Call Trace:
<TASK>
dump_stack_lvl+0x75/0xb0
dump_stack+0x14/0x1a
lockdep_rcu_suspicious.cold+0x4e/0x97
vhost_vsock_get+0x8f/0xa0 [vhost_vsock]
vhost_vsock_dev_ioctl+0x307/0x530 [vhost_vsock]
__x64_sys_ioctl+0x4f2/0xa00
x64_sys_call+0xed0/0x1da0
do_syscall_64+0x73/0xfa0
entry_SYSCALL_64_after_hwframe+0x76/0x7e
...
</TASK>
This is not a real problem, because the vhost_vsock_get() caller, i.e.
vhost_vsock_set_cid(), holds the `vhost_vsock_mutex` used by the hash
table writers. Anyway, to prevent that warning, add lockdep_is_held()
condition to hash_for_each_possible_rcu() to verify that either the
caller is in an RCU read section or `vhost_vsock_mutex` is held when
CONFIG_PROVE_RCU_LIST is enabled; and also clarify the comment for
vhost_vsock_get() to better describe the locking requirements and the
scope of the returned pointer validity.
About vhost_vsock_reset_orphans(), currently this function is only
called via vsock_for_each_connected_socket(), which holds the
`vsock_table_lock` spinlock (which is also an RCU read-side critical
section). However, add an explicit RCU read lock there to make the code
more robust and explicit about the RCU requirements, and to prevent
issues if the calling context changes in the future or if
vhost_vsock_reset_orphans() is called from other contexts.
Fixes: 834e772c8d ("vhost/vsock: fix use-after-free in network stack callers")
Cc: stefanha@redhat.com
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20251126133826.142496-1-sgarzare@redhat.com>
Message-ID: <20251126210313.GA499503@fedora>
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1ddb815fdf ]
The "dev->clt_device_id" variable is set using ida_alloc_max() which
returns an int and in particular it returns negative error codes.
Change the type from u32 to int to fix the error checking.
Fixes: c9b5645fd8 ("block: rnbd-clt: Fix leaked ID in init_dev()")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit daa24603d9 ]
If a ublk server process releases a ublk char device file, any requests
dispatched to the ublk server but not yet completed will retain a ref
value of UBLK_REFCOUNT_INIT. Before commit e63d2228ef ("ublk: simplify
aborting ublk request"), __ublk_fail_req() would decrement the reference
count before completing the failed request. However, that commit
optimized __ublk_fail_req() to call __ublk_complete_rq() directly
without decrementing the request reference count.
The leaked reference count incorrectly allows user copy and zero copy
operations on the completed ublk request. It also triggers the
WARN_ON_ONCE(refcount_read(&io->ref)) warnings in ublk_queue_reinit()
and ublk_deinit_queue().
Commit c5c5eb24ed ("ublk: avoid ublk_io_release() called after ublk
char dev is closed") already fixed the issue for ublk devices using
UBLK_F_SUPPORT_ZERO_COPY or UBLK_F_AUTO_BUF_REG. However, the reference
count leak also affects UBLK_F_USER_COPY, the other reference-counted
data copy mode. Fix the condition in ublk_check_and_reset_active_ref()
to include all reference-counted data copy modes. This ensures that any
ublk requests still owned by the ublk server when it exits have their
reference counts reset to 0.
Signed-off-by: Caleb Sander Mateos <csander@purestorage.com>
Fixes: e63d2228ef ("ublk: simplify aborting ublk request")
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ef3b04091f ]
Move the call to preempt_prepare_postamble() after verifying that
preempt_postamble_ptr is valid. If preempt_postamble_ptr is NULL,
dereferencing it in preempt_prepare_postamble() would lead to a crash.
This change avoids calling the preparation function when the
postamble allocation has failed, preventing potential NULL pointer
dereference and ensuring proper error handling.
Fixes: 50117cad0c ("drm/msm/a6xx: Use posamble to reset counters on preemption")
Signed-off-by: Alok Tiwari <alok.a.tiwari@oracle.com>
Patchwork: https://patchwork.freedesktop.org/patch/687659/
Message-ID: <20251113082839.3821867-1-alok.a.tiwari@oracle.com>
Signed-off-by: Rob Clark <robin.clark@oss.qualcomm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 129049d4fe ]
On plaforms with an a7xx GPU not supporting IFPC, the ifpc_reglist
if still deferenced in a7xx_patch_pwrup_reglist() which causes
a kernel crash:
Unable to handle kernel NULL pointer dereference at virtual address 0000000000000008
...
pc : a6xx_hw_init+0x155c/0x1e4c [msm]
lr : a6xx_hw_init+0x9a8/0x1e4c [msm]
...
Call trace:
a6xx_hw_init+0x155c/0x1e4c [msm] (P)
msm_gpu_hw_init+0x58/0x88 [msm]
adreno_load_gpu+0x94/0x1fc [msm]
msm_open+0xe4/0xf4 [msm]
drm_file_alloc+0x1a0/0x2e4 [drm]
drm_client_init+0x7c/0x104 [drm]
drm_fbdev_client_setup+0x94/0xcf0 [drm_client_lib]
drm_client_setup+0xb4/0xd8 [drm_client_lib]
msm_drm_kms_post_init+0x2c/0x3c [msm]
msm_drm_init+0x1a4/0x228 [msm]
msm_drm_bind+0x30/0x3c [msm]
...
Check the validity of ifpc_reglist before deferencing the table
to setup the register values.
Fixes: a6a0157cc6 ("drm/msm/a6xx: Enable IFPC on Adreno X1-85")
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Akhil P Oommen <akhilpo@oss.qualcomm.com>
Patchwork: https://patchwork.freedesktop.org/patch/688944/
Message-ID: <20251117-topic-sm8x50-fix-a6xx-non-ifpc-v1-1-e4473cbf5903@linaro.org>
Signed-off-by: Rob Clark <robin.clark@oss.qualcomm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1f7d6e2efe ]
The atomic write enable module param is "atomic_wr", and not
"atomic_write", so fix the module param description.
Fixes: 84f3a3c01d ("scsi: scsi_debug: Atomic write support")
Signed-off-by: John Garry <john.g.garry@oracle.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Link: https://patch.msgid.link/20251211100651.9056-1-john.g.garry@oracle.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 36dac9a3dd ]
Since commit e424054000 ("MIPS: Tracing: Reduce the overhead of
dynamic Function Tracer"), the macro UASM_i_LA_mostly has been used,
and this macro can generate more than 2 instructions. At the same
time, the code in ftrace assumes that no more than 2 instructions can
be generated, which is why it stores them in an int[2] array. However,
as previously noted, the macro UASM_i_LA_mostly (and now UASM_i_LA)
causes a buffer overflow when _mcount is beyond 32 bits. This leads to
corruption of the variables located in the __read_mostly section.
This corruption was observed because the variable
__cpu_primary_thread_mask was corrupted, causing a hang very early
during boot.
This fix prevents the corruption by avoiding the generation of
instructions if they could exceed 2 instructions in
length. Fortunately, insn_la_mcount is only used if the instrumented
code is located outside the kernel code section, so dynamic ftrace can
still be used, albeit in a more limited scope. This is still
preferable to corrupting memory and/or crashing the kernel.
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b169e1733c ]
Dell Pro Rugged 10/12 tablets has a reliable VGBS method.
If VGBS is not called on boot, the on-screen keyboard won't appear if the
device is booted without a keyboard.
Call VGBS on boot on thess devices to get the initial state of
SW_TABLET_MODE in a reliable way.
Signed-off-by: Chia-Lin Kao (AceLan) <acelan.kao@canonical.com>
Reviewed-by: Hans de Goede <johannes.goede@oss.qualcomm.com>
Link: https://patch.msgid.link/20251127070407.656463-1-acelan.kao@canonical.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 541dfb49dc ]
./drivers/hwmon/emc2305.c:597:4-15: ERROR: probable double put
Device node iterators put the previous value of the index variable, so an
explicit put causes a double put.
Signed-off-by: Pei Xiao <xiaopei01@kylinos.cn>
Link: https://lore.kernel.org/r/tencent_CD373F952BE48697C949E39CB5EB77841D06@qq.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 13989207ee ]
With authentication, in addition to EKEYREJECTED there is also no point in
retrying reconnects when status is ENOKEY. Thus, add -ENOKEY as another
criteria to determine when to stop retries.
Cc: Daniel Wagner <wagi@kernel.org>
Cc: Hannes Reinecke <hare@suse.de>
Closes: https://lore.kernel.org/linux-nvme/20250829-nvme-fc-sync-v3-0-d69c87e63aee@kernel.org/
Signed-off-by: Justin Tee <justintee8345@gmail.com>
Tested-by: Daniel Wagner <wagi@kernel.org>
Reviewed-by: Daniel Wagner <wagi@kernel.org>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4910da6b36 ]
The for_each_child_of_node() macro automatically manages device node
reference counts during normal iteration. However, when breaking out
of the loop early with return, the current iteration's node is not
automatically released, leading to a reference count leak.
Fix this by adding of_node_put(child) before returning from the loop
when emc2305_set_single_tz() fails.
This issue could lead to memory leaks over multiple probe cycles.
Signed-off-by: Pei Xiao <xiaopei01@kylinos.cn>
Link: https://lore.kernel.org/r/tencent_5CDC08544C901D5ECA270573D5AEE3117108@qq.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b71cbcf7d1 ]
nvme_fc_ctrl_put can acquire the rport lock when freeing the
ctrl object:
nvme_fc_ctrl_put
nvme_fc_ctrl_free
spin_lock_irqsave(rport->lock)
Thus we can't hold the rport lock when calling nvme_fc_ctrl_put.
Justin suggested use the safe list iterator variant because
nvme_fc_ctrl_put will also modify the rport->list.
Cc: Justin Tee <justin.tee@broadcom.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Daniel Wagner <wagi@kernel.org>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 55715d7ad5 ]
Add Legion Go 2 SKU's to the Extreme Mode quirks table.
Signed-off-by: Derek J. Clark <derekjohn.clark@gmail.com>
Reviewed-by: Armin Wolf <W_Armin@gmx.de>
Reviewed-by: Mark Pearson <mpearson-lenovo@squebb.ca>
Link: https://patch.msgid.link/20251127151605.1018026-4-derekjohn.clark@gmail.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d3429178ee ]
When probing the I2C master, disable SMBus interrupts to prevent
storms caused by broken firmware mis-configuring IC_SMBUS=1; the
handler never services them and a mis-configured SMBUS Master
extend-clock timeout or SMBUS Slave extend-clock timeout can
flood the CPU.
Signed-off-by: Jinhui Guo <guojinhui.liam@bytedance.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Link: https://lore.kernel.org/r/20251021075714.3712-2-guojinhui.liam@bytedance.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
