MSM8916 gains new support for Huawei Ascend G7, with NFC, sensors and
touchscreen. The Samsung Galaxy A3/A5 gains battery support, touch keys,
NFC.
MSM8996 received more cleanup and refactoring, preparing for upcoming
new devices. Note worthy is the long pending enablement of CPUfreq.
SC7180 continues to stabilize, with a range of small fixes for various
bits and pieces, and new revisions for the CoachZ and pompom devices.
SC7280 continues to grow, with more clock controllers, thermal sensors,
thermal zones, CPUfreq and interconnect providers.
Xiaomi Poco F1 gaines audio support and the OnePlus 6/6T gaines IPA
support.
SM8350 gains some cleanups and the IPA device is enabled.
Initial support for the Microsoft Surface Duo, based on SM8150, is
added.
IPQ8074 gained support for the HK10 board.
-----BEGIN PGP SIGNATURE-----
iQJPBAABCAA5FiEEBd4DzF816k8JZtUlCx85Pw2ZrcUFAmDH2OsbHGJqb3JuLmFu
ZGVyc3NvbkBsaW5hcm8ub3JnAAoJEAsfOT8Nma3FDXkQAKsqE8ItJUGMoSjdmyFM
9qdaFPtrUI2kJdyq5HQ75duaSdIcVtiiDzl1w/oz8JQJg+1Wy0/x33Y8vPt4EIrs
9VQjeeXI4IyUMTnw/UEPZzmXebxYQBzryRQw0QQljptaFeIg9iVJXSUy+xqhHSdo
nWlT7XqWsDE/WA0JJhd1mPZeF1YQ7EbSJRAuME4lPDv8Toi158i2rFQLV/ebI306
U2KtN3C8N+XPsMwNZlGkPPIWXmcGlDgPHt3Wg7cTU8DUOP4c71pEuT2c8oC5o1Zu
XXd6Irp3MLlmLImLYZBLUYho1SCHknbya2pKGfBy39yiI0RqPFFIPVFjcpHMomDT
r1qsvbvtktK5TW7sYGR+Fcf66vQbvFVbydgR4IzvGth1DbajEkCGlPL7GwJURGN6
U5U6Fws6cF0wko81CMy09/9j9F/HmWsL0t1z3aL3gdo0DswsxUy5NsWcEEY9xG0t
A8IT7Qjd0t1OnVYp12oUKRKsvGtjL7O5iDBEV4QU4h2ckT0i12Wnxev1t6mw56V6
RWzKd0aki7NCFwQ3AWWNeFpC+hmVrKz3OtnSQbjS0R+DEg9ayO9T46UVLer1maoh
yXbaXyd5A1Vl3NQ4+1CARHgCWA9fmgJD13DDPF6zEVwPY8JS4ARSXVCLDXI7z4zC
5xyHsMOMWPhR8LHaAUxlGqyU
=Pj6c
-----END PGP SIGNATURE-----
Merge tag 'qcom-arm64-for-5.14' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/dt
Qualcomm ARM64 DT updates for v5.14
MSM8916 gains new support for Huawei Ascend G7, with NFC, sensors and
touchscreen. The Samsung Galaxy A3/A5 gains battery support, touch keys,
NFC.
MSM8996 received more cleanup and refactoring, preparing for upcoming
new devices. Note worthy is the long pending enablement of CPUfreq.
SC7180 continues to stabilize, with a range of small fixes for various
bits and pieces, and new revisions for the CoachZ and pompom devices.
SC7280 continues to grow, with more clock controllers, thermal sensors,
thermal zones, CPUfreq and interconnect providers.
Xiaomi Poco F1 gaines audio support and the OnePlus 6/6T gaines IPA
support.
SM8350 gains some cleanups and the IPA device is enabled.
Initial support for the Microsoft Surface Duo, based on SM8150, is
added.
IPQ8074 gained support for the HK10 board.
* tag 'qcom-arm64-for-5.14' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (85 commits)
arm64: dts: qcom: sc7180: Add xo clock for eMMC and Sd card
arm64: dts: sc7280: Add interconnect provider DT nodes
arm64: dts: qcom: msm8916-huawei-g7: Add NFC
arm64: dts: qcom: msm8916-huawei-g7: Add display regulator
arm64: dts: qcom: msm8916-huawei-g7: Add sensors
arm64: dts: qcom: msm8916-huawei-g7: Add touchscreen
arm64: dts: qcom: msm8916: Add device tree for Huawei Ascend G7
arm64: dts: qcom: sc7180-trogdor: Update flash freq to match reality
arm64: dts: qcom: sc7180: Add wakeup delay for adau codec
arm64: dts: qcom: sdm845: Remove cros-pd-update on Cheza
arm64: dts: qcom: sc7180: Remove cros-pd-update on Trogdor
arm64: dts: qcom: sc7180: Disable PON on Trogdor
arm64: dts: qcom: sc7180: Modify SPI_CLK voltage level for trogdor
arm64: dts: qcom: add initial device-tree for Microsoft Surface Duo
arm64: dts: qcom: sdm845-mtp: enable IPA
arm64: dts: qcom: sc7180: SD-card GPIO pin set bias-pull up
arm64: dts: qcom: sc7180: Move sdc pinconf to board specific DT files
arm64: dts: qcom: msm8916-samsung-a2015: Add NFC
arm64: dts: qcom: msm8916-samsung-a2015: Add rt5033 battery
arm64: dts: qcom: msm8916-samsung-a5u: Add touch key regulator
...
Link: https://lore.kernel.org/r/20210614223712.393096-1-bjorn.andersson@linaro.org
Signed-off-by: Olof Johansson <olof@lixom.net>
- New board support: i.MX8MM Gateworks GW7901 board.
- Add SPBA bus description for i.MX8MN and i.MX8MM.
- A series of update on imx8mq-nitrogen board to add USB OTG/Host and
LT8912 MIPI-DSI to HDMI support.
- Correct enet clock description for i.MX8 Connection Subsystem.
- A couple of patches from Heiko Schocher to add FlexSPI device for
i.MX8MP SoC and enable SPI NOR Flash support on imx8mp-phycore-som.
- Remove the reference to audio IPG clock on i.MX8MP.
- Enable EQOS Ethernet and PMIC device support for imx8mp-evk.
- Disable USB over-current on imx8mm-evk and imx8mn-evk.
- Add dma-ranges description for i.MX8MM and i.MX8MN SoC.
- Add PCIe clock description for i.MX8MQ SoC.
- Enable PCIe support on freeway board.
- Enable OPTEE support on ls1028a-rdb board.
-----BEGIN PGP SIGNATURE-----
iQFIBAABCgAyFiEEFmJXigPl4LoGSz08UFdYWoewfM4FAmDFvn4UHHNoYXduZ3Vv
QGtlcm5lbC5vcmcACgkQUFdYWoewfM5v7Qf/QbcMDnuc3phG9SvVY2HYRhJwQqr+
Fj6bXtPZAtk6knPjdhuxhtbLqDbZoDaJGOYaZE2itJpSfMIRZHgk5gb+fz4caZvC
ZS4nefLmjAlyctlVaDpDwUGQVis+7BfwnsY7HVqbbqJDXjC0bNL0iQvcvIKjDDdg
aXirBcpZvRtdkXvXG2QdUZJmTjnLnDKe9oM6AP6Ernami5n3yX7VT9AyJfKQoEra
9A6Y+sGol65W8S2qVcpPxWfSSoiRHSKKuSlOHpeRaIALRCz0WgyIvvB1NsY1lTBt
VkhLq5ySI+AnHJwvBUn6R10cV8Lx4rUOi3Q4EtH/Sg7dtiK+UKKa2YmTxg==
=seFj
-----END PGP SIGNATURE-----
Merge tag 'imx-dt64-5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/dt
i.MX arm64 device tree chagnes for 5.14:
- New board support: i.MX8MM Gateworks GW7901 board.
- Add SPBA bus description for i.MX8MN and i.MX8MM.
- A series of update on imx8mq-nitrogen board to add USB OTG/Host and
LT8912 MIPI-DSI to HDMI support.
- Correct enet clock description for i.MX8 Connection Subsystem.
- A couple of patches from Heiko Schocher to add FlexSPI device for
i.MX8MP SoC and enable SPI NOR Flash support on imx8mp-phycore-som.
- Remove the reference to audio IPG clock on i.MX8MP.
- Enable EQOS Ethernet and PMIC device support for imx8mp-evk.
- Disable USB over-current on imx8mm-evk and imx8mn-evk.
- Add dma-ranges description for i.MX8MM and i.MX8MN SoC.
- Add PCIe clock description for i.MX8MQ SoC.
- Enable PCIe support on freeway board.
- Enable OPTEE support on ls1028a-rdb board.
* tag 'imx-dt64-5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: (24 commits)
arm64: dts: imx8mn-evk: disable over current for usb
arm64: dts: imx8mm-evk: disable over current for usb1
arm64: dts: freescale: Separate each group of data in the property 'reg'
arm64: dts: imx8: conn: fix enet clock setting
arm64: dts: imx8mq: assign PCIe clocks
arm64: dts: imx8mn: specify dma-ranges
arm64: dts: imx8mm: specify dma-ranges
arm64: dts: fsl-ls1028a: Correct ECAM PCIE window ranges
arm64: dts: imx8mn-beacon-som: Assign PMIC clock
arm64: dts: ls208xa: remove bus-num from dspi node
arm64: dts: ls1012a: enable PCIe on freeway board
arm64: dts: imx8mp-evk: enable EQOS ethernet
arm64: dts: imx8mp: Remove the reference to audio ipg clock on imx8mp
arm64: dts: imx8mq-evk: add one regulator used to power up pcie phy
arm64: dts: imx8mm: Add spba1 and spba2 buses
arm64: dts: imx8mn: Add spba1 bus
arm64: dts: imx8mq-nitrogen: add lt8912 MIPI-DSI to HDMI
arm64: dts: imx8mq-nitrogen: add USB HOST support
arm64: dts: imx8mq-nitrogen: add USB OTG support
arm64: dts: imx8mp-phycore-som: enable spi nor
...
Link: https://lore.kernel.org/r/20210613082544.16067-5-shawnguo@kernel.org
Signed-off-by: Olof Johansson <olof@lixom.net>
- New board support: i.MX6Q DaSheng COM-9XX SBC board, i.MX28 based XEA
board, GE B1x5v2 boards.
- A series from Christoph Niedermaier to correct imx6q-dhcom
descriptions, add device aliases and ethernet VIO regulator.
- Correct Ethernet node name for imx51-digi-connectcore-som and
imx53-ard board to comply DT schema.
- A couple of update on imx6dl-yapp4 board, configuring OLED display
segment offset, and using aliases to set custom MMC device indexes.
- A series from Oleksij Rempel and Robin van der Gracht to update
Protonic boards: imx6dl-prtvt7, imx6dl-plym2m and imx6qdl-vicut1.
- A series from Shengjiu Wang to improve various audio support on NXP
reference boards.
- Rename pinfunc for i.MX25 GPIO_[A-F] pads for consistency.
-----BEGIN PGP SIGNATURE-----
iQFIBAABCgAyFiEEFmJXigPl4LoGSz08UFdYWoewfM4FAmDFuRMUHHNoYXduZ3Vv
QGtlcm5lbC5vcmcACgkQUFdYWoewfM4VgAf/Z69ssu3l3ZPrHncXx6bnX7X+Ja0H
NxccV3DBtdaaCBODM9bnJ3HbWA3PFX0azA2q2CdOpjyk7UWeRO/RuZ5GZbdWkZfK
VrlJxX9fPpvJZp6HQS0a4cVHgJZDJ5hSef+ThwE/Yanm0cf+0vOW5M3enR+1j/xD
tsIyno5dj3I0dailhZy5KCChYznWF1DJcJ7spm5AAejXV+iSAX1q29zQ4q6yT/18
9zfuinaz3zrg0eN7qNpU5XziNv0Dbr06VBWM5Tfiio4DL7iM5jePA1LjWrvmH2Sk
NC1Kjke3ahl7illudSHUhtmLwtYh7dpRElf6saZBPMP+OpKF+hiAEog/2w==
=ja0d
-----END PGP SIGNATURE-----
Merge tag 'imx-dt-5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/dt
i.MX device tree changes for 5.14:
- New board support: i.MX6Q DaSheng COM-9XX SBC board, i.MX28 based XEA
board, GE B1x5v2 boards.
- A series from Christoph Niedermaier to correct imx6q-dhcom
descriptions, add device aliases and ethernet VIO regulator.
- Correct Ethernet node name for imx51-digi-connectcore-som and
imx53-ard board to comply DT schema.
- A couple of update on imx6dl-yapp4 board, configuring OLED display
segment offset, and using aliases to set custom MMC device indexes.
- A series from Oleksij Rempel and Robin van der Gracht to update
Protonic boards: imx6dl-prtvt7, imx6dl-plym2m and imx6qdl-vicut1.
- A series from Shengjiu Wang to improve various audio support on NXP
reference boards.
- Rename pinfunc for i.MX25 GPIO_[A-F] pads for consistency.
* tag 'imx-dt-5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: (30 commits)
ARM: dts: imx6: Add GE B1x5v2
ARM: dts: imx6q-dhcom: Add ethernet VIO regulator
ARM: dts: imx6q-dhcom: Add aliases for i2c, serial and rtc
ARM: dts: imx6q-dhcom: Add gpios pinctrl for i2c bus recovery
ARM: dts: imx6q-dhcom: Fix ethernet plugin detection problems
ARM: dts: imx6q-dhcom: Fix ethernet reset time properties
ARM: dts: imx6dl-prtvt7: Remove unused 'sound-dai-cells' from ssi1 node
ARM: dts: imx6dl-prtvt7: The sgtl5000 uses i2s not ac97
ARM: dts: imx6qdl-vicut1: add interrupt-counter nodes
ARM: dts: imx6dl-prtvt7: Enable the VPU
ARM: dts: imx6dl: enable touchscreen debounce filter on PLYM2M and PRTVT7 boards
ARM: dts: imx6dl-plym2m: remove touchscreen-size-* properties
ARM: dts: imx6dl-prtvt7: fix PWM cell count for the backlight node.
ARM: dts: imx6dl-prtvt7: Remove backlight enable gpio
ARM: dts: imx6dl-prtvt7: add TSC2046 touchscreen node
ARM: dts: imx53-ard: Correct Ethernet node name
ARM: dts: i.MX51: digi-connectcore-som: Correct Ethernet node name
ARM: dts: imx6dl-riotboard: configure PHY clock and set proper EEE value
ARM: dts: imx6: edmqmx6: set phy-mode to RGMII-ID
ARM: dts: imx6qdl-sabresd: Configure the gpio for hp detect
...
Link: https://lore.kernel.org/r/20210613082544.16067-4-shawnguo@kernel.org
Signed-off-by: Olof Johansson <olof@lixom.net>
The calculations for the DLL register values are based on the clock rate
of the reference clock. Provide the reference clock in the definition of
the two SDHCI controllers to not rely on the default values.
Reviewed-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Signed-off-by: Shaik Sajida Bhanu <sbhanu@codeaurora.org>
Link: https://lore.kernel.org/r/1623309107-27833-1-git-send-email-sbhanu@codeaurora.org
[bjorn: Rewrote commit message]
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
The SL3516 SoC has a crypto offloader IP.
This patch adds it on the gemini SoC Device-tree.
Link: https://lore.kernel.org/r/20210611220501.684997-1-linus.walleij@linaro.org
Signed-off-by: Corentin Labbe <clabbe@baylibre.com>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Olof Johansson <olof@lixom.net>
mainly:
- I2S Support for the V3
- Audio Codec Support for the V3s
- DMA support for the V3s
- PWM support for the V3s
- Support for Bluetooth Audio on the pinephone
- Add A10-like timers to the A64 and R40
- New boards: Forlinx OKA40i-C, Forlinx OKA40i-C, NanoPi R1S H5
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQRcEzekXsqa64kGDp7j7w1vZxhRxQUCYMN5hwAKCRDj7w1vZxhR
xa2sAP0Y4UY9ncxWmuTUMgi4osqscowxGUsCHdfxP+Yk9/IJ8wEAqKA5tfior25d
guy+cgXft/CixRtgv6Go3W55tJpZ6wQ=
=A9Cb
-----END PGP SIGNATURE-----
Merge tag 'sunxi-dt-for-5.14-1' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into arm/dt
Our usual bunch of patches to improve the Allwinner SoCs support,
mainly:
- I2S Support for the V3
- Audio Codec Support for the V3s
- DMA support for the V3s
- PWM support for the V3s
- Support for Bluetooth Audio on the pinephone
- Add A10-like timers to the A64 and R40
- New boards: Forlinx OKA40i-C, Forlinx OKA40i-C, NanoPi R1S H5
* tag 'sunxi-dt-for-5.14-1' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux: (29 commits)
ARM: dts: sun8i: v3s: enable emac for zero Dock
arm64: dts: allwinner: pinephone: Set audio card name
ARM: dts: sun8i: r40: Add timer node
ARM: dts: sun8i: V3: add I2S interface to V3 dts
dt-bindings: sound: sun4i-i2s: add Allwinner V3 I2S compatible
ARM: dts: sun8i: V3: add codec analog frontend to V3 dts
ASoC: dt-bindings: sun8i-a23-codec-analog: add compatible for Allwinner V3
ARM: dts: sun8i: v3s: add analog codec and frontend to v3s dts
ARM: dts: sun8i: v3s: add DMA properties to peripherals supporting DMA
ARM: dts: sun8i: v3s: add DMA controller to v3s dts
ARM: dts: sun8i: v3s: add pwm controller to v3s dts
dt-bindings: pwm: allwinner: add v3s pwm compatible
arm64: dts: allwinner: h5: Add NanoPi R1S H5 support
dt-bindings: arm: Add NanoPi R1S H5
arm64: dts: allwinner: pinephone: Add support for Bluetooth audio
arm64: dts: allwinner: a64: Allow multiple DAI links
arm64: dts: allwinner: a64: Add pinmux nodes for AIF2/AIF3
arm64: dts: allwinner: a64: Allow using multiple codec DAIs
ARM: dts: sun8i-a33: Allow using multiple codec DAIs
ASoC: dt-bindings: sun8i-codec: Increase #sound-dai-cells
...
Link: https://lore.kernel.org/r/96cc77ec-139d-4685-8a66-a60964cf39fd.lettre@localhost
Signed-off-by: Olof Johansson <olof@lixom.net>
- A fix for sama5d4 gpio mux
- A trivial fix for DT documentation
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQQ5TRCVIBiyi/S+BG4fOrpwrNPNDAUCYMNX7gAKCRAfOrpwrNPN
DJa1AQCeS3dhkLRYeDZ56/QLM5fEOc8Udqml4JS2iGX16wJ9hQD9FdBKiXbRUvUV
mq2JQ0C1smb6Ro5KPpHqlpJTtIfxNAE=
=HggT
-----END PGP SIGNATURE-----
Merge tag 'at91-dt-5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/at91/linux into arm/dt
AT91 dt for 5.14:
- A fix for sama5d4 gpio mux
- A trivial fix for DT documentation
* tag 'at91-dt-5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/at91/linux:
dt-bindings: i2c: at91: fix example for scl-gpios
ARM: dts: at91: sama5d4: fix pinctrl muxing
Link: https://lore.kernel.org/r/20210611123446.20510-1-nicolas.ferre@microchip.com
Signed-off-by: Olof Johansson <olof@lixom.net>
- Document support for the new RZ/G2L, RZ/G2LC, and RZ/G2UL SoCs,
- Document support for the new RZ/G2L SMARC EVK board.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQQ9qaHoIs/1I4cXmEiKwlD9ZEnxcAUCYMMo+AAKCRCKwlD9ZEnx
cEbVAP9U5LZ0bf+eETTIrpwkGNc8O2iJ4NRmFkdhpPa60S2MPwEA14Vjx36RrIxb
1pDLka0B3WK5u/b31N4ut88v7658iw0=
=tqZR
-----END PGP SIGNATURE-----
Merge tag 'renesas-dt-bindings-for-v5.14-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel into arm/dt
Renesas DT binding updates for v5.14
- Document support for the new RZ/G2L, RZ/G2LC, and RZ/G2UL SoCs,
- Document support for the new RZ/G2L SMARC EVK board.
* tag 'renesas-dt-bindings-for-v5.14-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel:
dt-bindings: power: renesas,rzg2l-sysc: Add DT binding documentation for SYSC controller
dt-bindings: arm: renesas: Document SMARC EVK
dt-bindings: arm: renesas: Document Renesas RZ/G2{L,LC} SoC variants
dt-bindings: arm: renesas: Document Renesas RZ/G2UL SoC
Link: https://lore.kernel.org/r/cover.1623403802.git.geert+renesas@glider.be
Signed-off-by: Olof Johansson <olof@lixom.net>
Just a single fix to use standard and generic nodes names for SCMI
power domain controller and clock controller devicetree nodes.
-----BEGIN PGP SIGNATURE-----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=36FY
-----END PGP SIGNATURE-----
Merge tag 'juno-fix-5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux into arm/dt
ARMv8 Juno fix for v5.14
Just a single fix to use standard and generic nodes names for SCMI
power domain controller and clock controller devicetree nodes.
* tag 'juno-fix-5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux:
arm64: dts: juno: Update SCPI nodes as per the YAML schema
Link: https://lore.kernel.org/r/20210611075805.2813712-1-sudeep.holla@arm.com
Signed-off-by: Olof Johansson <olof@lixom.net>
- Fix interrupt cells, GPIO controller node names in accordance
with new YAML schemas.
- Add proper compatible strings for Broadcomm Wifi and BT.
- Fix upp and add some mount matrices for accelerometers so
e.g. UI:s work as they should.
- Drop the DRDY pin assignment for a non-existing pin on a
magnetometer.
-----BEGIN PGP SIGNATURE-----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=Yyrj
-----END PGP SIGNATURE-----
Merge tag 'ux500-dts-v5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-nomadik into arm/dt
Some Ux500 DTS updates for v5.14:
- Fix interrupt cells, GPIO controller node names in accordance
with new YAML schemas.
- Add proper compatible strings for Broadcomm Wifi and BT.
- Fix upp and add some mount matrices for accelerometers so
e.g. UI:s work as they should.
- Drop the DRDY pin assignment for a non-existing pin on a
magnetometer.
* tag 'ux500-dts-v5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-nomadik:
ARM: dts: ux500: Fix orientation of Janice accelerometer
ARM: dts: href: Mount matrices for TVK R2
ARM: dts: ux500: Fix some compatible strings
ARM: dts: ux500: Drop drdy pin assignment from magnetometer
ARM: dts: ux500: Fix orientation of accelerometer
ARM: dts: ux500: Rename gpio-controller node
ARM: dts: ux500: Fix interrupt cells
Link: https://lore.kernel.org/r/CACRpkdYh9kZJU6PAxghPRGBco_61wRZgUnTZr_3qvySPCo5rBw@mail.gmail.com
Signed-off-by: Olof Johansson <olof@lixom.net>
please pull the following:
- Zhen fixes the Broadcom stingray serial node unit names to fix a DT
binding warning
-----BEGIN PGP SIGNATURE-----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=6wtT
-----END PGP SIGNATURE-----
Merge tag 'arm-soc/for-5.14/devicetree-arm64' of https://github.com/Broadcom/stblinux into arm/dt
This pull request contains Broadcom ARM64-based SoCs changes for 5.14,
please pull the following:
- Zhen fixes the Broadcom stingray serial node unit names to fix a DT
binding warning
* tag 'arm-soc/for-5.14/devicetree-arm64' of https://github.com/Broadcom/stblinux:
arm64: dts: broadcom: normalize the node name of the UART devices
Link: https://lore.kernel.org/r/20210610194836.309869-2-f.fainelli@gmail.com
Signed-off-by: Olof Johansson <olof@lixom.net>
for 5.14, please pull the following:
- Rafal updates the BCM5301x, HR2, BCM63xx, BCM5301x, NSP and Cygnus DTS
files to resolve a number of DT binding check warnings pertaining to
NAND, pinmux, clocks, SPI
- Stefan provides a fix for an increase in the DWC2 controller's RX FIFO
causing regressions on the Raspberry Pi 4B
- Mateusz adds a BCM2711 specific VEC compatible string to allow keying
off that variant properly
- Stefan adds support for the Raspberry Pi 400 by doing some DTS/DTSI
re-organization work and finally adding the DTS file proper
-----BEGIN PGP SIGNATURE-----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=ZmMv
-----END PGP SIGNATURE-----
Merge tag 'arm-soc/for-5.14/devicetree' of https://github.com/Broadcom/stblinux into arm/dt
This pull request contains Broadcom ARM-based SoCs Device Tree changes
for 5.14, please pull the following:
- Rafal updates the BCM5301x, HR2, BCM63xx, BCM5301x, NSP and Cygnus DTS
files to resolve a number of DT binding check warnings pertaining to
NAND, pinmux, clocks, SPI
- Stefan provides a fix for an increase in the DWC2 controller's RX FIFO
causing regressions on the Raspberry Pi 4B
- Mateusz adds a BCM2711 specific VEC compatible string to allow keying
off that variant properly
- Stefan adds support for the Raspberry Pi 400 by doing some DTS/DTSI
re-organization work and finally adding the DTS file proper
* tag 'arm-soc/for-5.14/devicetree' of https://github.com/Broadcom/stblinux:
arm64: dts: broadcom: Add reference to RPi 400
ARM: dts: Add Raspberry Pi 400 support
ARM: dts: bcm283x: Fix up GPIO LED node names
dt-bindings: arm: bcm2835: Add Raspberry Pi 400 to DT schema
ARM: dts: Move BCM2711 RPi specific into separate dtsi
ARM: dts: bcm283x: Fix up MMC node names
ARM: boot: dts: bcm2711: Add BCM2711 VEC compatible
Revert "ARM: dts: bcm283x: increase dwc2's RX FIFO size"
ARM: dts: BCM5301X: Fixup SPI binding
dt-bindings: clock: brcm, iproc-clocks: convert to the json-schema
ARM: dts: BCM5301X: Fix pinmux subnodes names
ARM: dts: Hurricane 2: Fix NAND nodes names
ARM: dts: BCM63xx: Fix NAND nodes names
ARM: NSP: dts: fix NAND nodes names
ARM: Cygnus: dts: fix NAND nodes names
ARM: brcmstb: dts: fix NAND nodes names
ARM: dts: BCM5301X: Fix NAND nodes names
Link: https://lore.kernel.org/r/20210610194836.309869-1-f.fainelli@gmail.com
Signed-off-by: Olof Johansson <olof@lixom.net>
Highlights:
-----------
MCU part:
- Fixes for Yaml verifications
MPU part:
- Configure qspi's mdma transfer to block for stm32mp151
- ST boards:
- Fixes for yaml verifications
- DH boards:
- Fixes for yaml verifications
- Rework of LAN8710i on DHCOM SoM to fit with requested reset sequence.
- Odyssey boards:
- fix Sd card detectection (gpio line updated)
- fix eMMC VQMMC suuply (use vdd instead of v3v3)
-----BEGIN PGP SIGNATURE-----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=RUQs
-----END PGP SIGNATURE-----
Merge tag 'stm32-dt-for-v5.14-1' of git://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32 into arm/dt
STM32 DT updates for v5.14, round 1
Highlights:
-----------
MCU part:
- Fixes for Yaml verifications
MPU part:
- Configure qspi's mdma transfer to block for stm32mp151
- ST boards:
- Fixes for yaml verifications
- DH boards:
- Fixes for yaml verifications
- Rework of LAN8710i on DHCOM SoM to fit with requested reset sequence.
- Odyssey boards:
- fix Sd card detectection (gpio line updated)
- fix eMMC VQMMC suuply (use vdd instead of v3v3)
* tag 'stm32-dt-for-v5.14-1' of git://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32:
ARM: dts: stm32: fix stpmic node for stm32mp1 boards
ARM: dts: stm32: Rename spi-flash/mx66l51235l@N to flash@N on DHCOM SoM
ARM: dts: stm32: Rename eth@N to ethernet@N on DHCOM SoM
ARM: dts: stm32: Drop unused linux,wakeup from touchscreen node on DHCOM SoM
ARM: dts: stm32: fix the Odyssey SoM eMMC VQMMC supply
ARM: dts: stm32: add a new DCMI pins group on stm32mp15
ARM: dts: stm32: fix ltdc pinctrl on microdev2.0-of7
dt-bindings: net: document ptp_ref clk in dwmac
ARM: dts: stm32: move stmmac axi config in ethernet node on stm32mp15
ARM: dts: stm32: fix i2c node name on stm32f746 to prevent warnings
ARM: dts: stm32: update pinctrl node name on STM32 MCU to prevent warnings
ARM: dts: stm32: fix timer nodes on STM32 MCU to prevent warnings
ARM: dts: stm32: fix RCC node name on stm32f429 MCU
ARM: dts: stm32: fix gpio-keys node on STM32 MCU boards
ARM: dts: stm32: fix stm32mp157c-odyssey card detect pin
ARM: dts: stm32: Configure qspi's mdma transfer to block for stm32mp151
ARM: dts: stm32: Fix touchscreen node on dhcom-pdk2
ARM: dts: stm32: Remove extra size-cells on dhcom-pdk2
ARM: dts: stm32: Rework LAN8710Ai PHY reset on DHCOM SoM
Link: https://lore.kernel.org/r/e4bfb255-63fb-74a8-d591-eb09821c93ee@foss.st.com
Signed-off-by: Olof Johansson <olof@lixom.net>
1. Several cleanups and alignment with dtschema. This includes removal
of unused properties and fixing LED brightness property.
2. Enable PMIC RTC interrupt as a wakeup source (intended to wakeup for
example from Suspend to RAM where the PMIC RTC's power is still
supplied).
3. Disable unused/not implemented camera on GT-I9100.
-----BEGIN PGP SIGNATURE-----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=8yS0
-----END PGP SIGNATURE-----
Merge tag 'samsung-dt-5.14' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into arm/dt
Samsung DTS ARM changes for v5.14
1. Several cleanups and alignment with dtschema. This includes removal
of unused properties and fixing LED brightness property.
2. Enable PMIC RTC interrupt as a wakeup source (intended to wakeup for
example from Suspend to RAM where the PMIC RTC's power is still
supplied).
3. Disable unused/not implemented camera on GT-I9100.
* tag 'samsung-dt-5.14' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
ARM: dts: exynos: Disable unused camera input for I9100
ARM: dts: exynos: enable PMIC wakeup from suspend on Odroid XU3/XU4 family
ARM: dts: exynos: enable PMIC wakeup from suspend on SMDK5420
ARM: dts: exynos: enable PMIC wakeup from suspend on Arndale Octa
ARM: dts: exynos: enable PMIC wakeup from suspend on P4 Note
ARM: dts: exynos: enable PMIC wakeup from suspend on Odroid X/U3
ARM: dts: exynos: enable PMIC wakeup from suspend on Midas
ARM: dts: exynos: enable PMIC wakeup from suspend on Odroid XU
ARM: dts: exynos: enable PMIC wakeup from suspend on Arndale
ARM: dts: exynos: enable PMIC wakeup from suspend on Origen4412
ARM: dts: exynos: enable PMIC wakeup from suspend on Itop Core
ARM: dts: s5pv210: remove unused Atmel touchscreen properties in Goni
ARM: dts: exynos: fix PWM LED max brightness on Odroid XU4
ARM: dts: exynos: fix PWM LED max brightness on Odroid HC1
ARM: dts: exynos: fix PWM LED max brightness on Odroid XU/XU3
ARM: dts: exynos: replace legacy MMS114 touchscreen x/y properties in GT-N7100
ARM: dts: exynos: align Broadcom WiFi with dtschema
Link: https://lore.kernel.org/r/20210610074055.12474-1-krzysztof.kozlowski@canonical.com
Signed-off-by: Olof Johansson <olof@lixom.net>
- IBM Rainier and Everest LED descriptions. These systems have a large
number of LEDs attached via expanders.
- Ampere Mt Jade updates, as OpenBMC bringup continues for this
machine.
- Updated 64MB flash layout for systems using OpenBMC on NOR root file
systems.
- Support for HS200 MMC on AST2600 EVB. This is only supported from A2,
so a new device tree is added to support A0 and A1.
- Update all command lines for early serial output.
-----BEGIN PGP SIGNATURE-----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=UxVn
-----END PGP SIGNATURE-----
Merge tag 'aspeed-5.14-devicetree' of git://git.kernel.org/pub/scm/linux/kernel/git/joel/bmc into arm/dt
ASPEED device tree updates for 5.14
- IBM Rainier and Everest LED descriptions. These systems have a large
number of LEDs attached via expanders.
- Ampere Mt Jade updates, as OpenBMC bringup continues for this
machine.
- Updated 64MB flash layout for systems using OpenBMC on NOR root file
systems.
- Support for HS200 MMC on AST2600 EVB. This is only supported from A2,
so a new device tree is added to support A0 and A1.
- Update all command lines for early serial output.
* tag 'aspeed-5.14-devicetree' of git://git.kernel.org/pub/scm/linux/kernel/git/joel/bmc:
ARM: dts: aspeed: everest: Add pcie cable card indicator leds
ARM: dts: aspeed: everest: Add vrm and other indicator leds
ARM: dts: aspeed: everest: Add dimm indicator leds
ARM: dts: aspeed: everest: Add pcie slot indicator leds
ARM: dts: aspeed: everest: Add nvme and fan indicator leds
ARM: dts: aspeed: everest: Add system level indicator leds
ARM: dts: aspeed-g5: Add SCU phandle to GFX node
ARM: dts: aspeed: Everest: Add directly controlled LEDs
ARM: dts: aspeed: Rainier 4U: Remove fan updates
ARM: dts: aspeed: Everest: Fix cable card PCA chips
ARM: dts: aspeed: Grow u-boot partition 64MiB OpenBMC flash layout
ARM: dts: aspeed: mtjade: switch to 64MB flash layout
ARM: dts: aspeed: mtjade: Add PSU support
ARM: dts: aspeed: mtjade: Enable OCP card support via NC-SI
ARM: dts: aspeed: Set earlycon boot argument
ARM: dts: aspeed-g6: Add pinctrl settings
ARM: dts: aspeed: ast2600evb: Add dts file for A1 and A0
ARM: dts: aspeed: ast2600evb: Add phase correction for emmc controller.
ARM: dts: aspeed: ast2600evb: Add sdhci node and gpio regulator for A2 evb.
Link: https://lore.kernel.org/r/CACPK8XduV9F=piu1qh56g+YNOZOBYTW7b2Y=XVYafpYDwWmDYA@mail.gmail.com
Signed-off-by: Olof Johansson <olof@lixom.net>
Mostly just clean-up for device tree binding checks with
few other clean-up patches:
- Drop ov5640 sensor for dra76-evm, it's just one of the
optional additional sensors and makes hard to use any of
the other options, TI is using the devicetree overlay
snippets for these
- Group the phandles in osd3358-sm-red to make the files
more readable
- A series of gpio clean-up patches to follow the binding
documentation
- Move ti,no-reset related properties to the target module
level, the ti-sysc driver handles them also in the child
but they really belong to the target module
- Drop the unnecessary uart compatible entries to make the
binding check to work
- Mailbox related updates to make the binding check to
work
-----BEGIN PGP SIGNATURE-----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=5lho
-----END PGP SIGNATURE-----
Merge tag 'omap-for-v5.14/dt-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into arm/dt
Devicetree changes for omaps for v5.14 merge window
Mostly just clean-up for device tree binding checks with
few other clean-up patches:
- Drop ov5640 sensor for dra76-evm, it's just one of the
optional additional sensors and makes hard to use any of
the other options, TI is using the devicetree overlay
snippets for these
- Group the phandles in osd3358-sm-red to make the files
more readable
- A series of gpio clean-up patches to follow the binding
documentation
- Move ti,no-reset related properties to the target module
level, the ti-sysc driver handles them also in the child
but they really belong to the target module
- Drop the unnecessary uart compatible entries to make the
binding check to work
- Mailbox related updates to make the binding check to
work
* tag 'omap-for-v5.14/dt-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
ARM: dts: OMAP2+: Replace underscores in sub-mailbox node names
ARM: dts: AM33xx/AM43xx: Rename wkup_m3 sub-mailbox node
ARM: dts: OMAP2/OMAP3: Rename processor sub-mailbox nodes
ARM: dts: OMAP2420: Drop interrupt-names from mailbox node
ARM: dts: am437x-l4: Drop ti,omap2-uart entry from UART nodes
ARM: dts: dra7-l4: Drop ti,omap4-uart entry from UART nodes
ARM: dts: am335x: fix ti,no-reset-on-init flag for gpios
ARM: dts: am437x-gp-evm: fix ti,no-reset-on-init flag for gpios
ARM: dts: am57xx-cl-som-am57x: fix ti,no-reset-on-init flag for gpios
ARM: dts: dra7x-evm: Align GPIO hog names with dt-schema
ARM: dts: omap5-board-common: align gpio hog names with dt-schema
ARM: dts: omap3: align gpio hog names with dt-schema
ARM: dts: am437x: align gpio hog names with dt-schema
ARM: dts: am335x: align GPIO hog names with dt-schema
ARM: dts: osd3358-sm-red: group in the same phandle all its properties
ARM: dts: dra76-evm: remove ov5640
Link: https://lore.kernel.org/r/pull-1622618286-677305@atomide.com-3
Signed-off-by: Olof Johansson <olof@lixom.net>
- GPIO extender support for the Falcon development board,
- Switches support for the ALT development board,
- Miscellaneous fixes and improvements.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQQ9qaHoIs/1I4cXmEiKwlD9ZEnxcAUCYLCiTgAKCRCKwlD9ZEnx
cNB6AP40CBtMLlW/h/DGCvm3iW8bRwHrBiuXeYrcHeJh1DoXFQEA3foLN4s5FZIQ
ZXFFOAgGVMHQft1o0qL0nO0ytw7zhg8=
=YIvB
-----END PGP SIGNATURE-----
Merge tag 'renesas-arm-dt-for-v5.14-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel into arm/dt
Renesas ARM DT updates for v5.14
- GPIO extender support for the Falcon development board,
- Switches support for the ALT development board,
- Miscellaneous fixes and improvements.
* tag 'renesas-arm-dt-for-v5.14-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel:
ARM: dts: alt: Add SW2 as GPIO keys
ARM: dts: renesas: Move enable-method to CPU nodes
arm64: dts: renesas: beacon: Fix USB ref clock references
arm64: dts: renesas: beacon: Fix USB extal reference
ARM: dts: rcar-gen1: Correct internal delay for i2c[123]
arm64: dts: renesas: eagle: Add x1 clock
ARM: dts: koelsch: Rename sw2 to keyboard
ARM: dts: r8a7779, marzen: Fix DU clock names
arm64: dts: renesas: v3msk: Fix memory size
arm64: dts: renesas: condor: Switch eMMC bus to 1V8
arm64: dts: renesas: falcon-csi-dsi: Add GPIO extenders
arm64: dts: renesas: beacon kit: Setup AVB refclk
arm64: dts: renesas: Add fck to etheravb-rcar-gen3 clock-names list
ARM: dts: renesas: Add fck to etheravb-rcar-gen2 clock-names list
Link: https://lore.kernel.org/r/cover.1622188835.git.geert+renesas@glider.be
Signed-off-by: Olof Johansson <olof@lixom.net>
- MAINTAINERS fix for the DTS files
- Drop a duplicate ethernet node on the RUT1xx DTS
- Add device_type to the PCI node
- Fix up some DTS syntax so it agrees with the schemas merged
for the v5.14 merge window
-----BEGIN PGP SIGNATURE-----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=/Twf
-----END PGP SIGNATURE-----
Merge tag 'gemini-dts-v5.14-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-nomadik into arm/dt
Gemini device tree updates for the v5.14 kernel:
- MAINTAINERS fix for the DTS files
- Drop a duplicate ethernet node on the RUT1xx DTS
- Add device_type to the PCI node
- Fix up some DTS syntax so it agrees with the schemas merged
for the v5.14 merge window
* tag 'gemini-dts-v5.14-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-nomadik:
ARM: dts: gemini: remove xxx-cells from display
ARM: dts: gemini-dlink-dir-685: Remove address from display port
ARM: dts: gemini-dlink-dir-685: rename gpio-i2c to i2c
ARM: dts: gemini-dlink-dns-313: rename gpio-i2c to i2c
ARM: dts: gemini: convert obsolete SPI properties
ARM: dts: gemini: use the right rtc compatible
ARM: dts: gemini: add device_type on pci
ARM: dts: gemini-rut1xx: remove duplicate ethernet node
ARM: dts: gemini: rename mdio to the right name
MAINTAINERS: gemini: add missing dts pattern
Link: https://lore.kernel.org/r/CACRpkdZWpLAcAStq8dEyGL_d9Bvp-WNPu-2EuJw1eTL4kyvgig@mail.gmail.com
Signed-off-by: Olof Johansson <olof@lixom.net>
- Add ethernet to the boards
- Add PCI hosts to the boards
- Create an expansion bus around the flash memory
- Add the beeper to NSLU2 completing the NSLU2 DTS
-----BEGIN PGP SIGNATURE-----
iQIzBAABCAAdFiEElDRnuGcz/wPCXQWMQRCzN7AZXXMFAmC2GpQACgkQQRCzN7AZ
XXM+rBAAi4pY5gcmzy3tFdt0wNuJFs3Wn8zvaWRybFottIvfUw+lXOYiHBpa9O0m
yToj+LwKbylgeAuG7rfjzVRq0snKKF5y00eq3MKPGxYTZYGQ71lw80v24k6hnxug
yOKzabbViQihHPzddxZmPvjI8jFjZlx4ChHIe1rbzRxQgfR1uqaKICuaake7/jXr
PEoP4uhfyIjBuOiCBBva3UPhSKuEZUJnzOGs0TbYoX8D3DryWQrCtWVg0ogWwdWM
/SLjFpuHpsYt84d8wIkMPu8sVcrj0/jy796UISPhKYxMKMd8USzkAZcyxD3w/WNJ
KjtQnp137smEoeqqLnHViEqMD7jv7GG0+ptfhMqRGKiV770yOKbXKvCj/EWQxIfX
wjdLesSIa8douAk6jX09iSaVril+oxw9fNCsRJJX5k0382quGEvjZPfhs3qSuL8Q
ltXB/y5hV9ropbvi2volRvx5PF54RNFCxJW68fAaV8FxNhOOUGDLWp3fQ7oDl2Iz
EOEgqeu/Ue1wffrZ+tJWQDn6z04Yj7vs/76YzaRicc8JIr4o8rS+6f9feYLYSDgQ
K8LZaKUhS7XHR4YMzWqNi0oIsT2T1JIWWtO16JYvk1pRIbIgVAaiztXPeZcGkHs4
jIyIMIJ8FpnQYmMvbtT7jOVCVSdLenrHVKjfitgKI4uGqtRj2fg=
=W/eR
-----END PGP SIGNATURE-----
Merge tag 'ixp4xx-dts-v5.14-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-nomadik into arm/dt
IXP4xx DTS updates for the v5.14 kernel:
- Add ethernet to the boards
- Add PCI hosts to the boards
- Create an expansion bus around the flash memory
- Add the beeper to NSLU2 completing the NSLU2 DTS
* tag 'ixp4xx-dts-v5.14-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-nomadik:
ARM: dts: Fix up the IXP4xx ethernet nodes
ARM: dts: ixp4xx: Add beeper to the NSLU2
ARM: dts: ixp4xx: Create a proper expansion bus
ARM: dts: ixp4xx: Add PCI hosts
ARM: dts: ixp4xx: Add ethernet
Link: https://lore.kernel.org/r/CACRpkdbmRjGW7vpr7hG+jiRTqNMZAyKZNhtvzj=SqhZmb1+F6A@mail.gmail.com
Signed-off-by: Olof Johansson <olof@lixom.net>
imx8mn evk board usb port does not support over current detection,
so disable it.
Signed-off-by: Li Jun <jun.li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
imx8mm evk board usb1 port does not support over current detection,
so disable it.
Signed-off-by: Li Jun <jun.li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Document the compatible for GE B1x5pv2 boards.
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Do not write the 'reg' of multiple groups of data into a uint32 array,
use <> to separate them. Otherwise, the errors similar to the following
will be reported by reg.yaml.
arch/arm64/boot/dts/freescale/fsl-ls1012a-frdm.dt.yaml:
soc: pcie@3400000:reg:0: \
[0, 54525952, 0, 1048576, 64, 0, 0, 8192] is too long
Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
enet_clk_ref actually is sourced from internal gpr clocks
which needs a default rate. Also update enet lpcg clock
output names to be more straightforward.
Cc: Abel Vesa <abel.vesa@nxp.com>
Cc: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Dong Aisheng <aisheng.dong@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
This fixes multiple issues with the current non-existent PCIe clock setup:
The controller can run at up to 250MHz, so use a parent that provides this
clock.
The PHY needs an exact 100MHz reference clock to function if the PCIe
refclock is not fed in via the refclock pads. While this mode is not
supported (yet) in the driver it doesn't hurt to make sure we are
providing a clock with the right rate.
The AUX clock is specified to have a maximum clock rate of 10MHz. So
the current setup, which drives it straight from the 25MHz oscillator is
actually overclocking the AUX input.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
DMA addressing capabilities on i.MX8MN are limited by the interconnect,
same as on i.MX8MQ. Add dma-ranges to the the peripheral bus to let
the kernel know about this.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Reviewed-by: Frieder Schrempf <frieder.schrempf@kontron.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
DMA addressing capabilities on i.MX8MM are limited by the interconnect,
same as on i.MX8MQ. Add dma-ranges to the the peripheral bus to let
the kernel know about this.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Reviewed-by: Frieder Schrempf <frieder.schrempf@kontron.de>
Tested-by: Frieder Schrempf <frieder.schrempf@kontron.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Currently all PCIE windows point to bus address 0x0, which does not match
the values obtained from hardware during EA.
Replace those values with CPU addresses, since in reality we
have a 1:1 mapping between the two.
Signed-off-by: Kornel Duleba <mindal@semihalf.com>
Acked-by: Claudiu Manoil <claudiu.manoil@nxp.com>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The PMIC throws an errors because the clock isn't assigned to it.
Fix this by assigning the clocks info.
Signed-off-by: Adam Ford <aford173@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
On LS2088A-RDB board, if the spi-fsl-dspi driver is built as module
then its probe fails with the following warning:
[ 10.471363] couldn't get idr
[ 10.471381] WARNING: CPU: 4 PID: 488 at drivers/spi/spi.c:2689 spi_register_controller+0x73c/0x8d0
...
[ 10.471651] fsl-dspi 2100000.spi: Problem registering DSPI ctlr
[ 10.471708] fsl-dspi: probe of 2100000.spi failed with error -16
Reason for the failure is that bus-num property is set for dspi node.
However, bus-num property is not set for the qspi node. If probe for
spi-fsl-qspi happens first then id 0 is dynamically allocated to it.
Call to spi_register_controller() from spi-fsl-dspi driver then fails.
Since commit 29d2daf2c3 ("spi: spi-fsl-dspi: Make bus-num property
optional") bus-num property is optional. Remove bus-num property from
dspi node to fix the issue.
Signed-off-by: Mian Yousaf Kaukab <ykaukab@suse.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
ls1012a-freeway board contains a M.2 2230 slot. Update the status of
pcei1 node to okay so that the pcie controller can be probed.
Signed-off-by: Mian Yousaf Kaukab <ykaukab@suse.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
On i.MX8MP, there is no audio ipg clock, so remove the wrong reference
to this clock in dts file.
Signed-off-by: Jacky Bai <ping.bai@nxp.com>
Reviewed-by: Abel Vesa <abel.vesa@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Both 1.8v and 3.3v power supplies can be used by i.MX8MQ PCIe PHY.
In default, the PCIE_VPH voltage is suggested to be 1.8v refer to data
sheet. When PCIE_VPH is supplied by 3.3v in the HW schematic design,
the VREG_BYPASS bits of GPR registers should be cleared from default
value 1b'1 to 1b'0. Thus, the internal 3v3 to 1v8 translator would be
turned on.
Signed-off-by: Richard Zhu <hongxing.zhu@nxp.com>
Reviewed-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The i.MX8MM reference manual shows there are two spba busses.
SPBA1 handles much of the serial interfaces, and SPBA2 covers much
of the audio.
Add both of them.
Signed-off-by: Adam Ford <aford173@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The i.MX8MN has an SPBA bus which covers much of the audio, but
there is a second SPBA bus which covers many of the serial interfaces
like SPI and UARTs currently missing from the device tree. The reference
manual calls the bus handling the audio peripherals SPBA2, and the bus
handling the serial peripherals is called SPBA1.
Rename the existing spba bus to spba2 and add spba1.
Signed-off-by: Adam Ford <aford173@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Add support of the lt8912b in the DTB.
This adds the support of the DB_DSIHD daugther board from
Boundary Devices.
Signed-off-by: Adrien Grassein <adrien.grassein@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Add the description for the USB host port.
This port is linked to a resettable USB HUB so handle
this reset signal with a GPIO hog.
Signed-off-by: Adrien Grassein <adrien.grassein@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Add the description for the USB OTG port.
The OTG port uses a dedicated regulator for vbus.
Signed-off-by: Adrien Grassein <adrien.grassein@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
