Commit graph

783,042 commits

Author SHA1 Message Date
Pierre-Louis Bossart
cbaa7f0bdb
ASoC: Intel: move SKL+ codec ACPI tables to common directory
No functionality change, just move to common tables to make it easier
to deal with SOF and share the same machine drivers - as done
previously for BYT/CHT/HSW/BDW.

Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2018-06-19 15:47:02 +01:00
Pierre-Louis Bossart
5f15f267da
ASoC: Intel: Skylake: cleanup before moving ACPI tables
There is no need to deal with DMICs if the DSP is not present and
there is no ACPI machine ID found.

Simplify before moving these ACPI tables to sound/soc/intel/common

Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2018-06-19 15:46:57 +01:00
Naveen Manohar
95555f580d
ASoC: Intel: broxton: reduce machine name for bxt_da7219_max98357a
Use truncated names in bxt id table and bxt_da7219_max98357a machine
as platform device id table expects names to be less then 20chars.

Signed-off-by: Naveen Manohar <naveen.m@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2018-06-19 15:46:53 +01:00
Mac Chiang
5fd46e649e
ASoC: Intel: kbl_da7219_max98357a: add fe_ops for kbl Audio Capture Port
platform support fixed constraint hw_prams as Stereo, 48KHz, 16 bits.
This fixed the headset mic recorded noise due to mono capturing
request from some apps. e.g. online Voice Recorder

Signed-off-by: Louis Collard <louiscollard@google.com>
Signed-off-by: Mac Chiang <mac.chiang@intel.com>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2018-06-19 15:46:30 +01:00
Richard Guy Briggs
f7859590d9 audit: eliminate audit_enabled magic number comparison
Remove comparison of audit_enabled to magic numbers outside of audit.

Related: https://github.com/linux-audit/audit-kernel/issues/86

Signed-off-by: Richard Guy Briggs <rgb@redhat.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
2018-06-19 10:43:55 -04:00
Jani Nikula
1c3eced3d4 drm/i915/audio: constify ELD pointers
The hooks aren't supposed to modify the ELD, so use const pointer. As a
drive-by fix, use drm_eld_size() to log ELD size.

Suggested-by: Ville Syrjala <ville.syrjala@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180619124437.10982-1-jani.nikula@intel.com
2018-06-19 17:41:44 +03:00
Richard Guy Briggs
d904ac0320 audit: rename FILTER_TYPE to FILTER_EXCLUDE
The AUDIT_FILTER_TYPE name is vague and misleading due to not describing
where or when the filter is applied and obsolete due to its available
filter fields having been expanded.

Userspace has already renamed it from AUDIT_FILTER_TYPE to
AUDIT_FILTER_EXCLUDE without checking if it already exists.  The
userspace maintainer assures that as long as it is set to the same value
it will not be a problem since the userspace code does not treat
compiler warnings as errors.  If this policy changes then checks if it
already exists can be added at the same time.

See: https://github.com/linux-audit/audit-kernel/issues/89

Signed-off-by: Richard Guy Briggs <rgb@redhat.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
2018-06-19 10:39:54 -04:00
Arnd Bergmann
cf89fe88a6 tee: replace getnstimeofday64() with ktime_get_real_ts64()
The two do the same thing, but we want to have a consistent
naming in the kernel.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
2018-06-19 16:37:14 +02:00
Ondrej Mosnáček
af85d1772e audit: Fix extended comparison of GID/EGID
The audit_filter_rules() function in auditsc.c used the in_[e]group_p()
functions to check GID/EGID match, but these functions use the current
task's credentials, while the comparison should use the credentials of
the task given to audit_filter_rules() as a parameter (tsk).

Note that we can use group_search(cred->group_info, ...) as a
replacement for both in_group_p and in_egroup_p as these functions only
compare the parameter to cred->fsgid/egid and then call group_search.

In fact, the usage of in_group_p was even more incorrect: it compares to
cred->fsgid (which is usually equal to cred->egid) and not cred->gid.

GitHub issue:
https://github.com/linux-audit/audit-kernel/issues/82

Fixes: 37eebe39c9 ("audit: improve GID/EGID comparation logic")
Signed-off-by: Ondrej Mosnacek <omosnace@redhat.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
2018-06-19 10:33:04 -04:00
Richard Guy Briggs
d87de4a878 audit: tie ANOM_ABEND records to syscall
Since core dump events are triggered by user activity, tie the
ANOM_ABEND record to the syscall record to collect all records from the
same event.

See: https://github.com/linux-audit/audit-kernel/issues/88

Signed-off-by: Richard Guy Briggs <rgb@redhat.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
2018-06-19 10:30:05 -04:00
Richard Guy Briggs
9b8753fffe audit: tie SECCOMP records to syscall
Since seccomp events are triggered by user activity, tie the SECCOMP
record to the syscall record to collect all records from the same event.

See: https://github.com/linux-audit/audit-kernel/issues/87

Signed-off-by: Richard Guy Briggs <rgb@redhat.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
2018-06-19 10:26:59 -04:00
Ville Syrjälä
ad193bc620 drm/i915: Enforce max hdisplay/hblank_start limits on HSW/BDW FDI
The PCH transcoder registers are only 12 bits wide for the hdisplay
and hblank_start values. On HSW/BDW the CPU side registers are 13
bits wide. intel_mode_valid() only checks against the higher limit
(since we don't know where the mode is to be used), so an extra
check is required against the FDI limits.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180615174406.12258-3-ville.syrjala@linux.intel.com
Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
2018-06-19 17:18:24 +03:00
Ville Syrjälä
ad77c537ea drm/i915: Check timings against hardware maximums
Validate that all display timings fit within the number of bits
we have in the transcoder timing registers.

The limits are:
hsw+:
 4k: vdisplay, vblank_start
 8k: everything else
gen3+:
 4k: h/vdisplay, h/vblank_start
 8k: everything else
gen2:
 2k: h/vdisplay, h/vblank_start
 4k: everything else

Also document the fact that the mode_config.max_width/height limits
refer to just the max framebuffer dimensions we support. Which may
be larger than the max hdisplay/vdisplay.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180615174406.12258-2-ville.syrjala@linux.intel.com
Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
2018-06-19 17:18:24 +03:00
Ville Syrjälä
98fac1d5c5 drm/i915: Nuke the cursor size defines
No point in having this extra indireciton for the cursor max size.
So drop the defines and just write out the raw numbers. Makes it
easier to see what's going on.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180615174406.12258-1-ville.syrjala@linux.intel.com
Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
2018-06-19 17:18:24 +03:00
Ville Syrjälä
1a4b8901c5 drm/i915: Print prop name/id when rejecting it
Use the '[PROP🆔name]' format I introduced for the core in the driver
debug messages as well.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180611193403.16118-3-ville.syrjala@linux.intel.com
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2018-06-19 17:18:24 +03:00
Benjamin Coddington
8163496e78 nfsd: don't advertise a SCSI layout for an unsupported request_queue
Commit 30181faae3 ("nfsd: Check queue type before submitting a SCSI
request") did the work of ensuring that we don't send SCSI requests to a
request queue that won't support them, but that check is in the
GETDEVICEINFO path.  Let's not set the SCSI layout in fs_layout_type in the
first place, and then we'll have less clients sending GETDEVICEINFO for
non-SCSI request queues and less unnecessary WARN_ONs.

While we're in here, remove some outdated comments that refer to
"overwriting" layout seletion because commit 8a4c392688 ("nfsd: allow
nfsd to advertise multiple layout types") changed things to no longer
overwrite the layout type.

Signed-off-by: Benjamin Coddington <bcodding@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2018-06-19 10:12:31 -04:00
Ondrej Mosnáček
29c1372d6a audit: allow other filter list types for AUDIT_EXE
This patch removes the restriction of the AUDIT_EXE field to only
SYSCALL filter and teaches audit_filter to recognize this field.

This makes it possible to write rule lists such as:

    auditctl -a exit,always [some general rule]
    # Filter out events with executable name /bin/exe1 or /bin/exe2:
    auditctl -a exclude,always -F exe=/bin/exe1
    auditctl -a exclude,always -F exe=/bin/exe2

See: https://github.com/linux-audit/audit-kernel/issues/54

Signed-off-by: Ondrej Mosnacek <omosnace@redhat.com>
Reviewed-by: Richard Guy Briggs <rgb@redhat.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
2018-06-19 09:33:42 -04:00
Trond Myklebust
7b0df92ac1 pNFS/flexfiles: Process writeback resends from nfsiod context as well
Although the writeback resends are more robust than the reads, since they
are not immediately rescheduled by the same thread, we are better off
processing them in the same place as the reads.

Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
2018-06-19 09:25:27 -04:00
Trond Myklebust
42f86b44a4 pNFS/flexfiles: Don't tie up all the rpciod threads in resends
We do not want to have rpciod threads perform recursive calls into the
RPC layer since that can deadlock. In particular, having to wait for
a layoutget can be nasty... We want rather to defer scheduling those
retries until we're in the rpc_release() callback, since that is
called from the nfsiod workqueue.

Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
2018-06-19 09:25:27 -04:00
Zhizhou Zhang
b154886f78 arm64: make secondary_start_kernel() notrace
We can't call function trace hook before setup percpu offset.
When entering secondary_start_kernel(), percpu offset has not
been initialized.  So this lead hotplug malfunction.
Here is the flow to reproduce this bug:

echo 0 > /sys/devices/system/cpu/cpu1/online
echo function > /sys/kernel/debug/tracing/current_tracer
echo 1 > /sys/kernel/debug/tracing/tracing_on
echo 1 > /sys/devices/system/cpu/cpu1/online

Acked-by: Mark Rutland <mark.rutland@arm.com>
Tested-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Zhizhou Zhang <zhizhouzhang@asrmicro.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2018-06-19 14:19:24 +01:00
Marek Szyprowski
dd65a941f6 arm64: dma-mapping: clear buffers allocated with FORCE_CONTIGUOUS flag
dma_alloc_*() buffers might be exposed to userspace via mmap() call, so
they should be cleared on allocation. In case of IOMMU-based dma-mapping
implementation such buffer clearing was missing in the code path for
DMA_ATTR_FORCE_CONTIGUOUS flag handling, because dma_alloc_from_contiguous()
doesn't honor __GFP_ZERO flag. This patch fixes this issue. For more
information on clearing buffers allocated by dma_alloc_* functions,
see commit 6829e274a6 ("arm64: dma-mapping: always clear allocated
buffers").

Fixes: 44176bb38f ("arm64: Add support for DMA_ATTR_FORCE_CONTIGUOUS to IOMMU")
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2018-06-19 14:19:21 +01:00
Michael Ellerman
e08ecba17b powerpc/64s: Fix build failures with CONFIG_NMI_IPI=n
I broke the build when CONFIG_NMI_IPI=n with my recent commit to add
arch_trigger_cpumask_backtrace(), eg:

  stacktrace.c:(.text+0x1b0): undefined reference to `.smp_send_safe_nmi_ipi'

We should rework the CONFIG symbols here in future to avoid these
double barrelled ifdefs but for now they fix the build.

Fixes: 5cc05910f2 ("powerpc/64s: Wire up arch_trigger_cpumask_backtrace()")
Reported-by: Christophe LEROY <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-06-19 23:03:50 +10:00
Zhouyang Jia
7c63ca24c8 xen/scsiback: add error handling for xenbus_printf
When xenbus_printf fails, the lack of error-handling code may
cause unexpected results.

This patch adds error-handling code after calling xenbus_printf.

Signed-off-by: Zhouyang Jia <jiazhouyang09@gmail.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
2018-06-19 14:54:49 +02:00
Zhouyang Jia
93efbd3987 scsi: xen-scsifront: add error handling for xenbus_printf
When xenbus_printf fails, the lack of error-handling code may
cause unexpected results.

This patch adds error-handling code after calling xenbus_printf.

Signed-off-by: Zhouyang Jia <jiazhouyang09@gmail.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
2018-06-19 14:54:41 +02:00
Chuck Lever
0dae72d581 sunrpc: Prevent duplicate XID allocation
Krzysztof Kozlowski <krzk@kernel.org> reports that a heavy NFSv4
WRITE workload against a slow NFS server causes his Raspberry Pi
clients to stall. Krzysztof bisected it to commit 37ac86c3a7
("SUNRPC: Initialize rpc_rqst outside of xprt->reserve_lock") .

I was able to reproduce similar behavior and it appears that rarely
the RPC client layer is re-allocating an XID for an RPC that it has
already partially sent. This results in the client ignoring the
subsequent reply, which carries the original XID.

For various reasons, checking !req->rq_xmit_bytes_sent in
xprt_prepare_transmit is not a 100% reliable mechanism for
determining when a fresh XID is needed.

Trond's preference is to allocate the XID at the time each rpc_rqst
slot is initialized.

This patch should also address a gcc 4.1.2 complaint reported by
Geert Uytterhoeven <geert@linux-m68k.org>.

Reported-by: Krzysztof Kozlowski <krzk@kernel.org>
Fixes: 37ac86c3a7 ("SUNRPC: Initialize rpc_rqst outside of ... ")
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Tested-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
2018-06-19 08:53:48 -04:00
Trond Myklebust
c8bf707353 pNFS: Don't send layoutreturn if the layout is already invalid
If the layout was invalidated due to a reboot, then don't try to send
a layoutreturn for it.

Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
2018-06-19 08:52:27 -04:00
Trond Myklebust
2dbf8dffbf pNFS: Always free the session slot on error in nfs4_layoutget_handle_exception
Right now, we can call nfs_commit_inode() while holding the session slot,
which could lead to NFSv4 deadlocks. Ensure we only keep the slot if
the server returned a layout that we have to process.

Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
2018-06-19 08:52:27 -04:00
Kenneth Graunke
7a3727f385 drm/i915: Enable provoking vertex fix on Gen9 systems.
The SF and clipper units mishandle the provoking vertex in some cases,
which can cause misrendering with shaders that use flat shaded inputs.

There are chicken bits in 3D_CHICKEN3 (for SF) and FF_SLICE_CHICKEN
(for the clipper) that work around the issue.  These registers are
unfortunately not part of the logical context (even the power context),
and so we must reload them every time we start executing in a context.

Bugzilla: https://bugs.freedesktop.org/103047
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20180615190605.16238-1-chris@chris-wilson.co.uk
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: stable@vger.kernel.org
(cherry picked from commit b77422f803)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2018-06-19 15:48:24 +03:00
Mika Kuoppala
bc64e05408 drm/i915: Fix context ban and hang accounting for client
If client is smart or lucky enough to create a new context
after each hang, our context banning mechanism will never
catch up, and as a result of that it will be saved from
client banning. This can result in a never ending streak of
gpu hangs caused by bad or malicious client, preventing
access from other legit gpu clients.

Fix this by always incrementing per client ban score if
it hangs in short successions regardless of context ban
scoring. The exception are non bannable contexts. They remain
detached from client ban scoring mechanism.

v2: xchg timestamp, tidyup (Chris)
v3: comment, bannable & banned together (Chris)

Fixes: b083a0870c ("drm/i915: Add per client max context ban limit")
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20180615104429.31477-1-mika.kuoppala@linux.intel.com
(cherry picked from commit 14921f3cef)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2018-06-19 15:48:16 +03:00
Ville Syrjälä
4dccc4d517 drm/i915: Turn off g4x DP port in .post_disable()
While Bspec doesn't list a specific sequence for turning off the DP port
on g4x we are getting an underrun if the port is disabled in the
.disable() hook. Looks like the pipe stops when the port stops, and by
that time the plane disable may not have completed yet. Also the plane(s)
seem to end up in some wonky state when this happens as they also signal
another underrun immediately after we turn them back on during the next
enable sequence.

We could add a vblank wait in .disable() to avoid wedging the planes,
but I assume we're still tripping up the pipe in some way. So it seems
better to me to just follow the ILK+ sequence and turn off the DP port
in .post_disable() instead. This sequence doesn't seem to suffer from
this problem. Could be it was always the intended sequence for DP and
the gen4 bspec was just never updated to include it.

Originally we used the bad sequence even on ilk+, but I changed that
in commit 08aff3fe26 ("drm/i915: Move DP port disable to post_disable
for pch platforms") as it was causing issues on those platforms as well.
I left out g4x then only because I didn't have the hardware to test it.
Now that I do it's fairly clear that the ilk+ sequence is also the
right choice for g4x.

v2: Fix whitespace fail (Jani)
    Mention the ilk+ commit (Jani)

Cc: stable@vger.kernel.org
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180613160553.11664-2-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
(cherry picked from commit 51a9f6dfc0)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2018-06-19 15:48:06 +03:00
Ville Syrjälä
1e34f1d368 drm/i915: Disallow interlaced modes on g4x DP outputs
Looks like interlaced DP output doesn't work on g4x either. Not all
that surprising considering we already established that interlaced
DP output is busted on VLV/CHV.

Cc: stable@vger.kernel.org
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180613160553.11664-1-ville.syrjala@linux.intel.com
(cherry picked from commit 929168c5f3)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2018-06-19 15:47:59 +03:00
Ville Syrjälä
4dc055c9cc drm/i915: Fix PIPESTAT irq ack on i965/g4x
On i965/g4x IIR is edge triggered. So in order for IIR to notice that
there is still a pending interrupt we have to force and edge in ISR.
For the ISR/IIR pipe event bits we can do that by temporarily
clearing all the PIPESTAT enable bits when we ack the status bits.
This will force the ISR pipe event bit low, and it can then go back
high when we restore the PIPESTAT enable bits.

This avoids the following race:
1. stat = read(PIPESTAT)
2. an enabled PIPESTAT status bit goes high
3. write(PIPESTAT, enable|stat);
4. write(IIR, PIPE_EVENT)

The end result is IIR==0 and ISR!=0. This can lead to nasty
vblank wait/flip_done timeouts if another interrupt source
doesn't trick us into looking at the PIPESTAT status bits despite
the IIR PIPE_EVENT bit being low.

Before i965 IIR was level triggered so this problem can't actually
happen there. And curiously VLV/CHV went back to the level triggered
scheme as well. But for simplicity we'll use the same i965/g4x
compatible code for all platforms.

Cc: stable@vger.kernel.org
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=106033
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=105225
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=106030
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180611200258.27121-1-ville.syrjala@linux.intel.com
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
(cherry picked from commit 132c27c97c)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2018-06-19 15:47:54 +03:00
Ville Syrjälä
541ab84d2b drm/i915: Allow DBLSCAN user modes with eDP/LVDS/DSI
When encountering a connector with the scaling mode property both
intel and modesetting ddxs sometimes add tons of DBLSCAN modes
to the output's mode list. The idea presumably being that since the
output will be going through the panel fitter anyway we can pretend
to use any kind of mode.

Sadly that means we can't reject user modes with the DBLSCAN flag
until we know whether we're going to be using the panel's native
mode or the user mode directly. Doing otherwise means X clients using
xf86vidmode/xrandr will get a protocol error (and often self
terminate as a result) when the kernel refuses to use the requested
mode with the DBLSCAN flag.

To undo the regression we'll move the DBLSCAN checks into the
connector->mode_valid() and encoder->compute_config() hooks.

Cc: stable@vger.kernel.org
Cc: Vito Caputo <vcaputo@pengaru.com>
Reported-by: Vito Caputo <vcaputo@pengaru.com>
Fixes: e995ca0b81 ("drm/i915: Provide a device level .mode_valid() hook")
References: https://lkml.org/lkml/2018/5/21/715
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180524125403.23445-1-ville.syrjala@linux.intel.com
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=106804
Tested-by: Arkadiusz Miskiewicz <arekm@maven.pl>
(cherry picked from commit e4dd27aadd)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2018-06-19 15:47:49 +03:00
Chris Wilson
a5bfcdf0e1 drm/i915/execlists: Avoid putting the error pointer
On allocation error, do not jump to the unwind handler that tries to
free the error pointer.

Reported-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Fixes: a89d1f921c ("drm/i915: Split i915_gem_timeline into individual timelines")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180611153332.14824-1-chris@chris-wilson.co.uk
(cherry picked from commit 467d35789e)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2018-06-19 15:47:44 +03:00
Chris Wilson
7ba33e1c9d drm/i915: Apply batch location restrictions before pinning
We special case the position of the batch within the GTT to prevent
negative self-relocation deltas from underflowing. However, that
restriction is being applied after a trial pin of the batch in its
current position. Thus we are not rejecting an invalid location if the
batch has been used before, leading to an assertion if we happen to need
to rearrange the entire payload. In the worst case, this may cause a GPU
hang on gen7 or perhaps missing state.

References: https://bugs.freedesktop.org/show_bug.cgi?id=105720
Fixes: 2889caa923 ("drm/i915: Eliminate lots of iterations over the execobjects array")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Martin Peres <martin.peres@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180610194325.13467-2-chris@chris-wilson.co.uk
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
(cherry picked from commit 746c8f143a)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2018-06-19 15:47:37 +03:00
Oleksandr Andrushchenko
6e3cc2a6e2 xen/grant-table: Export gnttab_{alloc|free}_pages as GPL
Only gnttab_{alloc|free}_pages are exported as EXPORT_SYMBOL
while all the rest are exported as EXPORT_SYMBOL_GPL, thus
effectively making it not possible for non-GPL driver modules
to use grant table module. Export gnttab_{alloc|free}_pages as
EXPORT_SYMBOL_GPL so all the exports are aligned.

Signed-off-by: Oleksandr Andrushchenko <oleksandr_andrushchenko@epam.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
2018-06-19 14:45:27 +02:00
Eric Dumazet
45c180bc29 xfrm_user: prevent leaking 2 bytes of kernel memory
struct xfrm_userpolicy_type has two holes, so we should not
use C99 style initializer.

KMSAN report:

BUG: KMSAN: kernel-infoleak in copyout lib/iov_iter.c:140 [inline]
BUG: KMSAN: kernel-infoleak in _copy_to_iter+0x1b14/0x2800 lib/iov_iter.c:571
CPU: 1 PID: 4520 Comm: syz-executor841 Not tainted 4.17.0+ #5
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
 __dump_stack lib/dump_stack.c:77 [inline]
 dump_stack+0x185/0x1d0 lib/dump_stack.c:113
 kmsan_report+0x188/0x2a0 mm/kmsan/kmsan.c:1117
 kmsan_internal_check_memory+0x138/0x1f0 mm/kmsan/kmsan.c:1211
 kmsan_copy_to_user+0x7a/0x160 mm/kmsan/kmsan.c:1253
 copyout lib/iov_iter.c:140 [inline]
 _copy_to_iter+0x1b14/0x2800 lib/iov_iter.c:571
 copy_to_iter include/linux/uio.h:106 [inline]
 skb_copy_datagram_iter+0x422/0xfa0 net/core/datagram.c:431
 skb_copy_datagram_msg include/linux/skbuff.h:3268 [inline]
 netlink_recvmsg+0x6f1/0x1900 net/netlink/af_netlink.c:1959
 sock_recvmsg_nosec net/socket.c:802 [inline]
 sock_recvmsg+0x1d6/0x230 net/socket.c:809
 ___sys_recvmsg+0x3fe/0x810 net/socket.c:2279
 __sys_recvmmsg+0x58e/0xe30 net/socket.c:2391
 do_sys_recvmmsg+0x2a6/0x3e0 net/socket.c:2472
 __do_sys_recvmmsg net/socket.c:2485 [inline]
 __se_sys_recvmmsg net/socket.c:2481 [inline]
 __x64_sys_recvmmsg+0x15d/0x1c0 net/socket.c:2481
 do_syscall_64+0x15b/0x230 arch/x86/entry/common.c:287
 entry_SYSCALL_64_after_hwframe+0x44/0xa9
RIP: 0033:0x446ce9
RSP: 002b:00007fc307918db8 EFLAGS: 00000293 ORIG_RAX: 000000000000012b
RAX: ffffffffffffffda RBX: 00000000006dbc24 RCX: 0000000000446ce9
RDX: 000000000000000a RSI: 0000000020005040 RDI: 0000000000000003
RBP: 00000000006dbc20 R08: 0000000020004e40 R09: 0000000000000000
R10: 0000000040000000 R11: 0000000000000293 R12: 0000000000000000
R13: 00007ffc8d2df32f R14: 00007fc3079199c0 R15: 0000000000000001

Uninit was stored to memory at:
 kmsan_save_stack_with_flags mm/kmsan/kmsan.c:279 [inline]
 kmsan_save_stack mm/kmsan/kmsan.c:294 [inline]
 kmsan_internal_chain_origin+0x12b/0x210 mm/kmsan/kmsan.c:685
 kmsan_memcpy_origins+0x11d/0x170 mm/kmsan/kmsan.c:527
 __msan_memcpy+0x109/0x160 mm/kmsan/kmsan_instr.c:413
 __nla_put lib/nlattr.c:569 [inline]
 nla_put+0x276/0x340 lib/nlattr.c:627
 copy_to_user_policy_type net/xfrm/xfrm_user.c:1678 [inline]
 dump_one_policy+0xbe1/0x1090 net/xfrm/xfrm_user.c:1708
 xfrm_policy_walk+0x45a/0xd00 net/xfrm/xfrm_policy.c:1013
 xfrm_dump_policy+0x1c0/0x2a0 net/xfrm/xfrm_user.c:1749
 netlink_dump+0x9b5/0x1550 net/netlink/af_netlink.c:2226
 __netlink_dump_start+0x1131/0x1270 net/netlink/af_netlink.c:2323
 netlink_dump_start include/linux/netlink.h:214 [inline]
 xfrm_user_rcv_msg+0x8a3/0x9b0 net/xfrm/xfrm_user.c:2577
 netlink_rcv_skb+0x37e/0x600 net/netlink/af_netlink.c:2448
 xfrm_netlink_rcv+0xb2/0xf0 net/xfrm/xfrm_user.c:2598
 netlink_unicast_kernel net/netlink/af_netlink.c:1310 [inline]
 netlink_unicast+0x1680/0x1750 net/netlink/af_netlink.c:1336
 netlink_sendmsg+0x104f/0x1350 net/netlink/af_netlink.c:1901
 sock_sendmsg_nosec net/socket.c:629 [inline]
 sock_sendmsg net/socket.c:639 [inline]
 ___sys_sendmsg+0xec8/0x1320 net/socket.c:2117
 __sys_sendmsg net/socket.c:2155 [inline]
 __do_sys_sendmsg net/socket.c:2164 [inline]
 __se_sys_sendmsg net/socket.c:2162 [inline]
 __x64_sys_sendmsg+0x331/0x460 net/socket.c:2162
 do_syscall_64+0x15b/0x230 arch/x86/entry/common.c:287
 entry_SYSCALL_64_after_hwframe+0x44/0xa9
Local variable description: ----upt.i@dump_one_policy
Variable was created at:
 dump_one_policy+0x78/0x1090 net/xfrm/xfrm_user.c:1689
 xfrm_policy_walk+0x45a/0xd00 net/xfrm/xfrm_policy.c:1013

Byte 130 of 137 is uninitialized
Memory access starts at ffff88019550407f

Fixes: c0144beaec ("[XFRM] netlink: Use nla_put()/NLA_PUT() variantes")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Cc: Steffen Klassert <steffen.klassert@secunet.com>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2018-06-19 14:38:37 +02:00
Zhouyang Jia
84c029a733 xen: add error handling for xenbus_printf
When xenbus_printf fails, the lack of error-handling code may
cause unexpected results.

This patch adds error-handling code after calling xenbus_printf.

Signed-off-by: Zhouyang Jia <jiazhouyang09@gmail.com>
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
2018-06-19 14:27:41 +02:00
Jan Kundrát
fb9acf5f1f
spi: orion: fix CS GPIO handling again
The code did not de-assert any CS GPIOs before probing slaves. This
means that several CS signals could be active at once, garbling the
communication. Whether this was actually a problem depended on the type
of the SPI device attached (so my "spidev" for userspace access worked
correctly because its probe was effectively a no-op), and on the state
of the GPIO pins at SoC's boot.

The code was already iterating through all DT children of the SPI
controller, so this change re-uses that loop for CS GPIO setup as well.
This means that this might change the number of the HW CS signal which
is picked for all GPIO CS devices. Previously, the lowest one was used,
but we now use the first one from the DT.

With this move of the code, we can also finally initialize each GPIO CS
lane before registering the SPI controller (which in turn probes for
slaves).

I tried to fix this in 544248623b already, but that only did it half
way by registering the GPIOs properly. That patch failed to set their
logic signals early enough, though.

Signed-off-by: Jan Kundrát <jan.kundrat@cesnet.cz>
Signed-off-by: Mark Brown <broonie@kernel.org>
2018-06-19 13:06:51 +01:00
Roger Pau Monne
1fe83888a2 xen: share start flags between PV and PVH
Use a global variable to store the start flags for both PV and PVH.
This allows the xen_initial_domain macro to work properly on PVH.

Note that ARM is also switched to use the new variable.

Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
2018-06-19 13:51:00 +02:00
Nicholas Piggin
855b6232dd powerpc/64: hard disable irqs on the panic()ing CPU
Similar to previous patches, hard disable interrupts when a CPU is
in panic. This reduces the chance the watchdog has to interfere with
the panic, and avoids any other type of masked interrupt being
executed when crashing which minimises the length of the crash path.

Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-06-19 21:28:23 +10:00
Nicholas Piggin
de6e5d3841 powerpc: smp_send_stop do not offline stopped CPUs
Marking CPUs stopped by smp_send_stop as offline can cause warnings
due to cross-CPU wakeups. This trace was noticed on a busy system
running a sysrq+c crash test, after the injected crash:

WARNING: CPU: 51 PID: 1546 at kernel/sched/core.c:1179 set_task_cpu+0x22c/0x240
CPU: 51 PID: 1546 Comm: kworker/u352:1 Tainted: G      D
Workqueue: mlx5e mlx5e_update_stats_work [mlx5_core]
[...]
NIP [c00000000017c21c] set_task_cpu+0x22c/0x240
LR [c00000000017d580] try_to_wake_up+0x230/0x720
Call Trace:
[c000000001017700] runqueues+0x0/0xb00 (unreliable)
[c00000000017d580] try_to_wake_up+0x230/0x720
[c00000000015a214] insert_work+0x104/0x140
[c00000000015adb0] __queue_work+0x230/0x690
[c000003fc5007910] [c00000000015b26c] queue_work_on+0x5c/0x90
[c0080000135fc8f8] mlx5_cmd_exec+0x538/0xcb0 [mlx5_core]
[c008000013608fd0] mlx5_core_access_reg+0x140/0x1d0 [mlx5_core]
[c00800001362777c] mlx5e_update_pport_counters.constprop.59+0x6c/0x90 [mlx5_core]
[c008000013628868] mlx5e_update_ndo_stats+0x28/0x90 [mlx5_core]
[c008000013625558] mlx5e_update_stats_work+0x68/0xb0 [mlx5_core]
[c00000000015bcec] process_one_work+0x1bc/0x5f0
[c00000000015ecac] worker_thread+0xac/0x6b0
[c000000000168338] kthread+0x168/0x1b0
[c00000000000b628] ret_from_kernel_thread+0x5c/0xb4

This happens because firstly the CPU is not really offline in the
usual sense, processes and interrupts have not been migrated away.
Secondly smp_send_stop does not happen atomically on all CPUs, so
one CPU can have marked itself offline, while another CPU is still
running processes or interrupts which can affect the first CPU.

Fix this by just not marking the CPU as offline. It's more like
frozen in time, so offline does not really reflect its state properly
anyway. There should be nothing in the crash/panic path that walks
online CPUs and synchronously waits for them, so this change should
not introduce new hangs.

Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-06-19 21:28:23 +10:00
Nicholas Piggin
8c1aef6a68 powerpc/64: hard disable irqs in panic_smp_self_stop
Similarly to commit 855bfe0de1 ("powerpc: hard disable irqs in
smp_send_stop loop"), irqs should be hard disabled by
panic_smp_self_stop.

Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-06-19 21:28:22 +10:00
Michael Ellerman
749a0278c2 powerpc/64s: Fix DT CPU features Power9 DD2.1 logic
In the device tree CPU features quirk code we want to set
CPU_FTR_POWER9_DD2_1 on all Power9s that aren't DD2.0 or earlier. But
we got the logic wrong and instead set it on all CPUs that aren't
Power9 DD2.0 or earlier, ie. including Power8.

Fix it by making sure we're on a Power9. This isn't a bug in practice
because the only code that checks the feature is Power9 only to begin
with. But we'll backport it anyway to avoid confusion.

Fixes: 9e9626ed3a ("powerpc/64s: Fix POWER9 DD2.2 and above in DT CPU features")
Cc: stable@vger.kernel.org # v4.17+
Reported-by: Paul Mackerras <paulus@samba.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Acked-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-06-19 21:28:21 +10:00
Nicholas Piggin
02390f66bd powerpc/64s/radix: Fix MADV_[FREE|DONTNEED] TLB flush miss problem with THP
The patch 99baac21e4 ("mm: fix MADV_[FREE|DONTNEED] TLB flush miss
problem") added a force flush mode to the mmu_gather flush, which
unconditionally flushes the entire address range being invalidated
(even if actual ptes only covered a smaller range), to solve a problem
with concurrent threads invalidating the same PTEs causing them to
miss TLBs that need flushing.

This does not work with powerpc that invalidates mmu_gather batches
according to page size. Have powerpc flush all possible page sizes in
the range if it encounters this concurrency condition.

Patch 4647706ebe ("mm: always flush VMA ranges affected by
zap_page_range") does add a TLB flush for all page sizes on powerpc for
the zap_page_range case, but that is to be removed and replaced with
the mmu_gather flush to avoid redundant flushing. It is also thought to
not cover other obscure race conditions:

https://lkml.kernel.org/r/BD3A0EBE-ECF4-41D4-87FA-C755EA9AB6BD@gmail.com

Hash does not have a problem because it invalidates TLBs inside the
page table locks.

Reported-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-06-19 21:28:21 +10:00
Michael Jeanson
69a8405999 powerpc/e500mc: Set assembler machine type to e500mc
In binutils 2.26 a new opcode for the "wait" instruction was added for the
POWER9 and has precedence over the one specific to the e500mc. Commit
ebf714ff37 ("powerpc/e500mc: Add support for the wait instruction in
e500_idle") uses this instruction specifically on the e500mc to work around
an erratum.

This results in an invalid instruction in idle_e500 when we build for the
e500mc on bintutils >= 2.26 with the default assembler machine type.

Since multiplatform between e500 and non-e500 is not supported, set the
assembler machine type globaly when CONFIG_PPC_E500MC=y.

Signed-off-by: Michael Jeanson <mjeanson@efficios.com>
Reviewed-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
CC: Benjamin Herrenschmidt <benh@kernel.crashing.org>
CC: Paul Mackerras <paulus@samba.org>
CC: Michael Ellerman <mpe@ellerman.id.au>
CC: Kumar Gala <galak@kernel.crashing.org>
CC: Vakul Garg <vakul.garg@nxp.com>
CC: Scott Wood <swood@redhat.com>
CC: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
CC: linuxppc-dev@lists.ozlabs.org
CC: linux-kernel@vger.kernel.org
CC: stable@vger.kernel.org
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-06-19 21:28:20 +10:00
Martin Kaiser
3f77f244d8 mtd: rawnand: mxc: set spare area size register explicitly
The v21 version of the NAND flash controller contains a Spare Area Size
Register (SPAS) at offset 0x10. Its setting defaults to the maximum
spare area size of 218 bytes. The size that is set in this register is
used by the controller when it calculates the ECC bytes internally in
hardware.

Usually, this register is updated from settings in the IIM fuses when
the system is booting from NAND flash. For other boot media, however,
the SPAS register remains at the default setting, which may not work for
the particular flash chip on the board. The same goes for flash chips
whose configuration cannot be set in the IIM fuses (e.g. chips with 2k
sector size and 128 bytes spare area size can't be configured in the IIM
fuses on imx25 systems).

Set the SPAS register explicitly during the preset operation. Derive the
register value from mtd->oobsize that was detected during probe by
decoding the flash chip's ID bytes.

While at it, rename the define for the spare area register's offset to
NFC_V21_RSLTSPARE_AREA. The register at offset 0x10 on v1 controllers is
different from the register on v21 controllers.

Fixes: d484018 ("mtd: mxc_nand: set NFC registers after reset")
Cc: stable@vger.kernel.org
Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Reviewed-by: Sascha Hauer <s.hauer@pengutronix.de>
Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
2018-06-19 13:17:59 +02:00
Waldemar Rymarkiewicz
c5c2a97b3a PM / OPP: Update voltage in case freq == old_freq
This commit fixes a rare but possible case when the clk rate is updated
without update of the regulator voltage.

At boot up, CPUfreq checks if the system is running at the right freq. This
is a sanity check in case a bootloader set clk rate that is outside of freq
table present with cpufreq core. In such cases system can be unstable so
better to change it to a freq that is preset in freq-table.

The CPUfreq takes next freq that is >= policy->cur and this is our
target_freq that needs to be set now.

dev_pm_opp_set_rate(dev, target_freq) checks the target_freq and the
old_freq (a current rate). If these are equal it returns early. If not,
it searches for OPP (old_opp) that fits best to old_freq (not listed in
the table) and updates old_freq (!).

Here, we can end up with old_freq = old_opp.rate = target_freq, which
is not handled in _generic_set_opp_regulator(). It's supposed to update
voltage only when freq > old_freq  || freq > old_freq.

if (freq > old_freq) {
		ret = _set_opp_voltage(dev, reg, new_supply);
[...]
if (freq < old_freq) {
		ret = _set_opp_voltage(dev, reg, new_supply);
		if (ret)

It results in, no voltage update while clk rate is updated.

Example:
freq-table = {
	1000MHz   1.15V
	 666MHZ   1.10V
	 333MHz   1.05V
}
boot-up-freq        = 800MHz   # not listed in freq-table
freq = target_freq  = 1GHz
old_freq            = 800Mhz
old_opp = _find_freq_ceil(opp_table, &old_freq);  #(old_freq is modified!)
old_freq            = 1GHz

Fixes: 6a0712f6f1 ("PM / OPP: Add dev_pm_opp_set_rate()")
Cc: 4.6+ <stable@vger.kernel.org> # v4.6+
Signed-off-by: Waldemar Rymarkiewicz <waldemar.rymarkiewicz@gmail.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2018-06-19 15:53:32 +05:30
Minas Harutyunyan
1d8e5c0027 dwc2: gadget: Fix ISOC IN DDMA PID bitfield value calculation
PID bitfield in descriptor should be set based on particular request
length, not based on EP's mc value. PID value can't be set to 0 even
request length is 0.

Signed-off-by: Minas Harutyunyan <hminas@synopsys.com>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2018-06-19 12:48:14 +03:00
Grigor Tovmasyan
9bb073a053 usb: gadget: dwc2: fix memory leak in gadget_init()
Freed allocated request for ep0 to prevent memory leak in case when
dwc2_driver_probe() failed.

Cc: Stefan Wahren <stefan.wahren@i2se.com>
Cc: Marek Szyprowski <m.szyprowski@samsung.com>
Tested-by: Stefan Wahren <stefan.wahren@i2se.com>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Acked-by: Minas Harutyunyan <hminas@synopsys.com>
Signed-off-by: Grigor Tovmasyan <tovmasya@synopsys.com>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2018-06-19 12:48:14 +03:00