Our chip support KVM over IP feature, so hibmc driver need to support
displaying without any connectors plugged in. If no connectors are
connected, the vdac connector status should be set to 'connected' to
ensure proper KVM display functionality. Additionally, for
previous-generation products that may lack hardware link support and
thus cannot detect the monitor, the same approach should be applied
to ensure VGA display functionality.
* Add phys_state in the struct of dp and vdac to check physical outputs.
* The 'epoch_counter' of the vdac connector is incremented when the
physical status changes.
For get_modes: using BMC modes for connector if no display is attached to
phys VGA cable, otherwise use EDID modes by drm_connector_helper_get_modes,
because KVM doesn't provide EDID reads.
The polling mechanism for the KMS helper is enabled.
Fixes: 4c962bc929 ("drm/hisilicon/hibmc: Add vga connector detect functions")
Reported-by: Thomas Zimmermann <tzimmermann@suse.de>
Closes: https://lore.kernel.org/all/0eb5c509-2724-4c57-87ad-74e4270d5a5a@suse.de/
Signed-off-by: Lin He <helin52@huawei.com>
Signed-off-by: Yongbang Shi <shiyongbang@huawei.com>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Tested-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patch.msgid.link/20260509032302.2057227-3-shiyongbang@huawei.com
In the past, the link cap is updated in link training at encoder enable
stage, but the hibmc_dp_mode_valid() is called before it, which will use
DP link's rate and lanes. So add the hibmc_dp_update_caps() in
hibmc_dp_update_caps() to avoid some potential risks.
Fixes: 607805abfb ("drm/hisilicon/hibmc: add dp mode valid check")
Signed-off-by: Lin He <helin52@huawei.com>
Signed-off-by: Yongbang Shi <shiyongbang@huawei.com>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patch.msgid.link/20260509032302.2057227-2-shiyongbang@huawei.com
To perform copy, based on whether the platform supports service copy
engines, either MEM_COPY or XY_FAST_COPY_BLT instruction is used.
Length of both the instructions is same today and so they use a common
define EMIT_COPY_DW.
This is not true for the future platforms. Implement separate functions
which return the length of the instruction to help in preparing for it.
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patch.msgid.link/20260511123746.616662-8-balasubramani.vivekanandan@intel.com
Signed-off-by: Balasubramani Vivekanandan <balasubramani.vivekanandan@intel.com>
Implement a function to return the length of the MEM_SET instruction.
This is to prepare for future platforms where the length of MEM_SET
instruction is expected to change.
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patch.msgid.link/20260511123746.616662-7-balasubramani.vivekanandan@intel.com
Signed-off-by: Balasubramani Vivekanandan <balasubramani.vivekanandan@intel.com>
Implement a function which returns the length of XY_FAST_COLOR_BLT
instruction instead of hardcoding it inside the emit_clear_main_copy.
In future platforms, the length of this instruction is expected to
change and this patch helps in preparing for it.
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patch.msgid.link/20260511123746.616662-6-balasubramani.vivekanandan@intel.com
Signed-off-by: Balasubramani Vivekanandan <balasubramani.vivekanandan@intel.com>
The FIXME says that xe_engine_snapshot_print.. is accessing persistent
driver data, unlike what the FIXME says that it does. Drop the FIXME
since the current code is not going to access the hardware while
dumping.
More details about this patch:
https://patchwork.freedesktop.org/patch/703884/?series=161407&rev=1
The starting two feedbacks make sense and the original patch is wrong
in adding those changes, but the last feedback is the one which
highlights the point.
Signed-off-by: Shekhar Chauhan <shekhar.chauhan@intel.com>
Reviewed-by: Balasubramani Vivekanandan <balasubramani.vivekanandan@intel.com>
Link: https://patch.msgid.link/20260512055508.1380191-1-shekhar.chauhan@intel.com
Signed-off-by: Balasubramani Vivekanandan <balasubramani.vivekanandan@intel.com>
Do not allow SYS_MEM_LAT_MEASURE_EN bit to be set in SYS_MEM_LAT_MEASURE
register. Doing so can cause memory corruption.
Reviewed-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
Signed-off-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Link: https://patch.msgid.link/20260430161459.2892545-5-ashutosh.dixit@intel.com
Add val arg to xe_oa_is_valid_config_reg so that register values can also
be verified, in addition to register address. Value verification is needed
to implement MERTOA Wa_14026779378.
Reviewed-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
Signed-off-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Link: https://patch.msgid.link/20260430161459.2892545-4-ashutosh.dixit@intel.com
Wa_14026746987 implies that only XE_OAM_FORMAT_MPEC8u32_B8_C8 and not
XE_OAM_FORMAT_MPEC8u64_B8_C8 can be supported for MERTOA unit.
Reviewed-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
Signed-off-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Link: https://patch.msgid.link/20260430161459.2892545-3-ashutosh.dixit@intel.com
When copying plane color state in a joiner configuration, use the plane in
the primary joiner pipe since it carries the pipeline number selected by
the user-space.
This assumes that all pipes in the joiner are symmetric in their plane
color capabilities.
Cc: stable@vger.kernel.org # v6.19+
Fixes: a78f1b6baf ("drm/i915/color: Add framework to program CSC")
Tested-by: Vidya Srinivas <vidya.srinivas@intel.com>
Signed-off-by: Chaitanya Kumar Borah <chaitanya.kumar.borah@intel.com>
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Link: https://patch.msgid.link/20260511053213.3122314-2-chaitanya.kumar.borah@intel.com
Backmerging to pull in commit 5401b9adeb ("i915: don't use
a vma that didn't match the context VM") to revert it.
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
After a GPU reset the HWSP is zeroed, so previously completed
requests appear incomplete. If such a request is picked up during
reset_rewind() and marked guilty, i915_request_set_error_once()
returns early (fence already signaled), leaving fence.error without
a fatal error code. The subsequent __i915_request_skip() then hits:
```
GEM_BUG_ON(!fatal_error(rq->fence.error))
```
Fixes a kernel BUG observed on Sandy Bridge (Gen6) during
heartbeat-triggered engine resets.
```
kernel BUG at drivers/gpu/drm/i915/i915_request.c:556!
RIP: __i915_request_skip+0x15e/0x1d0 [i915]
...
__i915_request_reset+0x212/0xa70 [i915]
reset_rewind+0xe4/0x280 [i915]
intel_gt_reset+0x30d/0x5b0 [i915]
heartbeat+0x516/0x530 [i915]
```
Guard __i915_request_skip() with i915_request_signaled(), if the
fence is already signaled, the ring content is committed and there
is nothing left to skip.
Fixes: 36e191f064 ("drm/i915: Apply i915_request_skip() on submission")
Closes: https://gitlab.freedesktop.org/drm/i915/kernel/-/work_items/13729
Signed-off-by: Sebastian Brzezinka <sebastian.brzezinka@intel.com>
Cc: stable@vger.kernel.org # v5.7+
Reviewed-by: Krzysztof Karas <krzysztof.karas@intel.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com>
Link: https://lore.kernel.org/r/fe76921d35b6ae85aa651822726d0d9815aa5362.1776339012.git.sebastian.brzezinka@intel.com
(cherry picked from commit 5ba54393dc)
Signed-off-by: Tvrtko Ursulin <tursulin@ursulin.net>
imx8qxp_pxl2dpi_get_available_ep_from_port() returns ERR_PTR()
on errors. imx8qxp_pxl2dpi_find_next_bridge() stores its return
value in a __free(device_node) variable before checking IS_ERR().
When the function returns on the error path, the cleanup action calls
of_node_put() on the ERR_PTR() value.
Do not let a device_node cleanup variable hold error pointers. Change
imx8qxp_pxl2dpi_get_available_ep_from_port() to return an int and pass
the endpoint node through an output argument. Initialize the output
argument to NULL so callers hold either NULL on error paths or a valid
device_node pointer on successful path.
Fixes: ceea3f7806 ("drm/bridge: imx8qxp-pxl2dpi: simplify put of device_node pointers")
Cc: stable@vger.kernel.org
Reviewed-by: Liu Ying <victor.liu@nxp.com>
Signed-off-by: Guangshuo Li <lgs201920130244@gmail.com>
Link: https://patch.msgid.link/20260507100604.667731-1-lgs201920130244@gmail.com
Signed-off-by: Liu Ying <victor.liu@nxp.com>
gfx_v12_0_init_microcode() always loads RS64 CP ucode but never set
adev->gfx.rs64_enable, so it stayed false and code that branches on it
(e.g. MEC pipe reset) used the legacy CP_MEC_CNTL path incorrectly.
Match GFX11: derive RS64 mode from the PFP firmware header (v2.0) via
amdgpu_ucode_hdr_version(). Log at debug when RS64 is enabled.
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Jesse Zhang <jesse.zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit b03d53598b)
The legacy CPER debugfs reader can reach the payload path without a
valid pointer snapshot. The remaining user byte count is also treated as
the ring occupancy in dwords, so reads past the header can copy more than
requested.
Take the CPER lock before sampling pointers. Resample rptr/wptr for
payload reads, bound the payload copy by available dwords and the
remaining user size, and advance the file position for each dword copied.
Signed-off-by: Xiang Liu <xiang.liu@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 1e40ef87ff)
[Why]
dcn32_validate_bandwidth() wraps dcn32_internal_validate_bw() with
DC_FP_START()/DC_FP_END(). In x86 non-RT, DC_FP_START takes fpregs_lock(),
which disables local softirqs.
The DML1 path through dcn32_enable_phantom_plane() calls kvzalloc() to
allocate ~335 KiB for dc_plane_state. This triggers the vmalloc path,
which calls BUG_ON(in_interrupt()) because it's invoked within the
FPU-enabled (softirq disabled) region, leading to a kernel crash.
[How]
Wrap the dc_state_create_phantom_plane() call with the
DC_RUN_WITH_PREEMPTION_ENABLED() macro to allow preemption during
this memory allocation.
Fixes: 235c676342 ("drm/amd/display: add DCN32/321 specific files for Display Core")
Closes: https://gitlab.freedesktop.org/drm/amd/-/work_items/4470
Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Mikhail Gavrilov <mikhail.v.gavrilov@gmail.com>
Signed-off-by: James Lin <pinglei.lin@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 885ccbef7b)
Cc: stable@vger.kernel.org
Fix lock inversions pointed out by Prike and Sunil. The hang detection
timeout *CAN'T* grab locks under which we wait for fences, especially
not the userq_mutex lock.
Then instead of this completely broken handling with the
hang_detect_fence just cancel the work when fences are processed and
re-start if necessary.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Sunil Khatri <sunil.khatri@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 1b62077f04)
Well the reset handling seems broken on multiple levels.
As first step of fixing this remove most calls to the hang detection.
That function should only be called after we run into a timeout! And *NOT*
as random check spread over the code in multiple places.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Sunil Khatri <sunil.khatri@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 71bea36b54)
This one was fortunately not looking so bad as the wait ioctl path, but
there were still a few things which could be fixed/improved:
1. Allocating with GFP_ATOMIC was quite unnecessary, we can do that
before taking the userq_lock.
2. Use a new mutex as protection for the fence_drv_xa so that we can do
memory allocations while holding it.
3. Starting the reset timer is unnecessary when the fence is already
signaled when we create it.
4. Cleanup error handling, avoid trying to free the queue when we don't
even got one.
v2: fix incorrect usage of xa_find, destroy the new mutex on error
v3: cleanup ref ordering
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Sunil Khatri <sunil.khatri@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 1609eb0f81)
The purpose of a GPU reset is to make sure that fence can be signaled
again and the signal and resume workers can make progress again.
So waiting for the resume worker or any fence in the GPU reset path is
just utterly nonsense.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Prike Liang <Prike.Liang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit fcd5f065ea)
Retry doesn't work here, since bo will be freed on error, leading to
UAF. However, now that we do the alloc & init before the attach, we can
now combine this as one unit and have the init do the alloc for us. This
should make the retry safe.
Reported by Sashiko.
v2: Fix up the error unwind (CI)
Closes: https://sashiko.dev/#/patchset/20260506184332.86743-2-matthew.auld%40intel.com
Fixes: eb289a5f6c ("drm/xe: Convert xe_dma_buf.c for exhaustive eviction")
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: <stable@vger.kernel.org> # v6.18+
Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Link: https://patch.msgid.link/20260508102635.149172-4-matthew.auld@intel.com
(cherry picked from commit 4796694182)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
There look to be some nasty races here when triggering the
invalidate_mappings hook:
1) We do xe_bo_alloc() followed by the attach, before the actual full bo
init step in xe_dma_buf_init_obj(). However the bo is visible on the
attachments list after the attach. This is bad since exporter driver,
say amdgpu, can at any time call back into our invalidate_mappings hook,
with an empty/bogus bo, leading to potential bugs/crashes.
2) Similar to 1) but here we get a UAF, when the invalidate_mappings
hook is triggered. For example, we get as far as xe_bo_init_locked()
but this fails in some way. But here the bo will be freed on error, but
we still have it attached from dma-buf pov, so if the
invalidate_mappings is now triggered then the bo we access is gone and
we trigger UAF and more bugs/crashes.
To fix this, move the attach step until after we actually have a fully
set up buffer object. Note that the bo is not published to userspace
until later, so not sure what the comment "Don't publish the bo
until we have a valid attachment", is referring to.
We have at least two different customers reporting hitting a NULL ptr
deref in evict_flags when importing something from amdgpu, followed by
triggering the evict flow. Hit rate is also pretty low, which would
hint at some kind of race, so something like 1) or 2) might explain
this.
v2:
- Shuffle the order of the ops slightly (no functional change)
- Improve the comment to better explain the ordering (Matt B)
Assisted-by: Gemini:gemini-3 #debug
Link: https://gitlab.freedesktop.org/drm/xe/kernel/-/work_items/7903
Link: https://gitlab.freedesktop.org/drm/xe/kernel/-/work_items/4055
Fixes: dd08ebf6c3 ("drm/xe: Introduce a new DRM driver for Intel GPUs")
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: <stable@vger.kernel.org> # v6.8+
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Acked-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Link: https://patch.msgid.link/20260508102635.149172-3-matthew.auld@intel.com
(cherry picked from commit af1f2ad0c5)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
The blitter engines' MEM_COPY and MEM_SET instructions were added as
part of the same hardware change that introduced service copy engines
(i.e., BCS1-BCS8) which is why the driver checks for service copy engine
presence when deciding whether to use these instructions or the older
XY_* instructions. However when making this decision the driver should
consider which engines are part of the hardware architecture, not which
engines are present/usable on the current device. For graphics IP
versions that architecturally include service copy engines (i.e.,
everything Xe2 and later, plus PVC's Xe_HPC) we should use MEM_SET and
MEM_COPY even in if all of the service copy engines wind up getting
fused off. I.e., we need to decide based on whether the platform's
graphics descriptor contains these engines, rather than whether the
usable engine mask contains them. This logic got broken when
gt->info.__engine_mask was removed, although in practice that mistake
has been harmless so far because there haven't been any hardware
SKUs that fuse off all of the service copy engines yet.
Replace the incorrect has_service_copy_support() function with a GT
feature flag that tracks more accurately whether the new blitter
instructions are usable. In addition to fixing incorrect logic if all
service copies are fused off, the flag also makes it more obvious what
the calling code is trying to do; previously it wasn't terribly obvious
why "has service copy engines" was being used as the condition for using
different instructions on all copy engine types.
The new feature flag is named 'has_xe2_blt_instructions' because we
expect this flag to be set for all Xe2 and later platforms (i.e.,
everything officially supported by the Xe driver). Technically there's
also one Xe1-era platform (PVC) that supports these engines/instructions
and will set this flag, but this still seems to be the most clear and
understandable name for the flag.
Fixes: 61549a2ee5 ("drm/xe: Drop __engine_mask")
Cc: Balasubramani Vivekanandan <balasubramani.vivekanandan@intel.com>
Reviewed-by: Balasubramani Vivekanandan <balasubramani.vivekanandan@intel.com>
Link: https://patch.msgid.link/20260507-xe2_copy-v1-1-26506381b821@intel.com
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
(cherry picked from commit 09b3998429)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
xe_bo_recompute_purgeable_state() walks all VMAs of a BO to determine
whether the BO can be made purgeable. This makes VMA create/destroy and
madvise updates O(n) in the number of mappings.
Replace the walk with BO-local counters protected by the BO dma-resv
lock:
- vma_count tracks the number of VMAs mapping the BO.
- willneed_count tracks active WILLNEED holders, including WILLNEED
VMAs and active dma-buf exports for non-imported BOs.
A DONTNEED BO is promoted back to WILLNEED on a 0->1 transition of
willneed_count. A BO is demoted to DONTNEED on a 1->0 transition only
when it still has VMAs, preserving the previous behaviour where a BO
with no mappings keeps its current madvise state.
PURGED remains terminal, preserving the existing "once purged, always
purged" rule.
Fixes: 4f44961eab ("drm/xe/vm: Prevent binding of purged buffer objects")
v2:
- Use early return for imported BOs in all four helpers to avoid
nesting (Matt B).
- Group purgeability state into a purgeable sub-struct on struct
xe_bo (Matt B).
- Reword xe_bo_willneed_put_locked() kernel-doc to explain that a 1->0
transition means all remaining active VMAs are DONTNEED (Matt B).
v3:
- Move DONTNEED/PURGED reject from vma_lock_and_validate() into
xe_vma_create(), gated on attr->purgeable_state == WILLNEED.
Fixes vm_bind bypass and partial-unbind rejection on DONTNEED
BOs (Matt B).
- Drop .check_purged from MAP and REMAP; keep it for PREFETCH and
add a comment why (Matt B).
- Skip BO validation in vma_lock_and_validate() for non-WILLNEED
VMA remnants so cleanup/remap paths do not repopulate
DONTNEED/PURGED BOs.
Suggested-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Cc: Himal Prasad Ghimiray <himal.prasad.ghimiray@intel.com>
Signed-off-by: Arvind Yadav <arvind.yadav@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patch.msgid.link/20260506132027.2556046-1-arvind.yadav@intel.com
Signed-off-by: Himal Prasad Ghimiray <himal.prasad.ghimiray@intel.com>
(cherry picked from commit 23fb2ea56c)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
v1:
Separate DPM clock attribute constraints for Arcturus (9.4.1) and
Aldebaran (9.4.2) ASICs.
- For Aldebaran:
* mclk/socclk: Disable write, only voltage control supported
* fclk/pcie: Mark as unsupported
- Remove 9.4.2 from global pcie check and handle it in ASIC specific case
- Update comments to reflect correct hardware names
v2:
fix some coding logic issue (by asad)
Signed-off-by: Yang Wang <kevinyang.wang@amd.com>
Reviewed-by: Kenneth Feng <kenneth.feng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
gfx_v12_0_init_microcode() always loads RS64 CP ucode but never set
adev->gfx.rs64_enable, so it stayed false and code that branches on it
(e.g. MEC pipe reset) used the legacy CP_MEC_CNTL path incorrectly.
Match GFX11: derive RS64 mode from the PFP firmware header (v2.0) via
amdgpu_ucode_hdr_version(). Log at debug when RS64 is enabled.
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Jesse Zhang <jesse.zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This patch adds support for vpe v2.0.0 with new structs and ip functions
Acked-by: Roy Chan <Roy.Chan@amd.com>
Signed-off-by: Caden Chien <chih-wei.chien@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
New offset and sh/mask are added for vpe v2.0.0
Acked-by: Roy Chan <Roy.Chan@amd.com>
Signed-off-by: Caden Chien <chih-wei.chien@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
A callback function is added to setup doorbell range during vpe hw
queue initialization on nbio 7.11.4.
Signed-off-by: Caden Chien <chih-wei.chien@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
S2A doorbell entry 5 on nbio 7.11.4 is used by vpe 2.0
Signed-off-by: Caden Chien <chih-wei.chien@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
When we do a full adapter reset, if we know the timedout fence
mark the fence with -ETIME rather than -ECANCELED so it
gets properly handled by userspace.
v2: rebase
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add the required FRL registers for DCN316.
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add the required FRL registers for DCN315.
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add all the required registers to support FRL on DCN303.
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add the required FRL registers for DCN302.
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add all the required registers to support FRL on DCN314.
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This commit add the basic set of FRL registers associated with DCN32.
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add the required DCN3.2.1 registers to enable FRL in this ASIC.
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This commit introduces multiple hardware registers necessary to enable
FRL on AMD devices.
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Introduce the stream creation function, which requires the FRL
registers for DCN30.
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The legacy CPER debugfs reader can reach the payload path without a
valid pointer snapshot. The remaining user byte count is also treated as
the ring occupancy in dwords, so reads past the header can copy more than
requested.
Take the CPER lock before sampling pointers. Resample rptr/wptr for
payload reads, bound the payload copy by available dwords and the
remaining user size, and advance the file position for each dword copied.
Signed-off-by: Xiang Liu <xiang.liu@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
There are gaps in the pf2vf message structure
between the guest driver and the host driver.
The pf2vf message info structure must be kept in sync
between both sides to ensure correct interpretation of fields.
Signed-off-by: chong li <chongli2@amd.com>
Reviewed-by: Emily Deng <Emily.Deng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This version brings along following update:
-Revert "Enable HUBP/OPTC/DPP power gating"
-Revert "Unify fast update classification paths"
-enable ODM 2:1 on single eDP based on pixel clock
-Enable IPS on DCN42
-Add additional IPS entry/exit for PSR/Replay
-Separate ABM functions into dedicated power_abm.c file
-Fix always-true lower-bound assert
-Refactor dc_link_aux_transfer_raw
-only call pmfw if smu present flags true
-Fix multiple compiler warnings
-Fix CRC open failure during active rendering
-Fix white screen on boot with OLED panel
-Fix refresh rate round up case
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Taimur Hassan <Syed.Hassan@amd.com>
Signed-off-by: James Lin <pinglei.lin@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why & How]
Update DMUB related command structure.
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Taimur Hassan <Syed.Hassan@amd.com>
Signed-off-by: James Lin <pinglei.lin@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
dcn32_validate_bandwidth() wraps dcn32_internal_validate_bw() with
DC_FP_START()/DC_FP_END(). In x86 non-RT, DC_FP_START takes fpregs_lock(),
which disables local softirqs.
The DML1 path through dcn32_enable_phantom_plane() calls kvzalloc() to
allocate ~335 KiB for dc_plane_state. This triggers the vmalloc path,
which calls BUG_ON(in_interrupt()) because it's invoked within the
FPU-enabled (softirq disabled) region, leading to a kernel crash.
[How]
Wrap the dc_state_create_phantom_plane() call with the
DC_RUN_WITH_PREEMPTION_ENABLED() macro to allow preemption during
this memory allocation.
Fixes: 235c676342 ("drm/amd/display: add DCN32/321 specific files for Display Core")
Closes: https://gitlab.freedesktop.org/drm/amd/-/work_items/4470
Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Mikhail Gavrilov <mikhail.v.gavrilov@gmail.com>
Signed-off-by: James Lin <pinglei.lin@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
