Commit graph

310,437 commits

Author SHA1 Message Date
Jesper Juhl
4ae2e594b7 [media] staging/media/as102: Don't call release_firmware() on uninitialized variable
If, in drivers/staging/media/as102/as102_fw.c::as102_fw_upload(), the call
	cmd_buf = kzalloc(MAX_FW_PKT_SIZE, GFP_KERNEL);
should fail and return NULL so that we jump to the 'error:' label,
then we'll end up calling 'release_firmware(firmware);' with
'firmware' still uninitialized - not good.

The easy fix is to just initialize 'firmware' to NULL when we declare
it, since release_firmware() deals gracefully with being passed NULL
pointers.

Signed-off-by: Jesper Juhl <jj@chaosbits.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-04-10 20:33:27 -03:00
Ezequiel García
96371fc89b [media] em28xx: Remove redundant dev->ctl_input set
dev->ctl_input() is always set before a call to video_mux(),
but then video_mux() sets it again with the same value.

Signed-off-by: Ezequiel Garcia <elezegarcia@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-04-10 20:30:44 -03:00
Kees Cook
923e9a1399 Smack: build when CONFIG_AUDIT not defined
This fixes builds where CONFIG_AUDIT is not defined and
CONFIG_SECURITY_SMACK=y.

This got introduced by the stack-usage reducation commit 48c62af68a
("LSM: shrink the common_audit_data data union").

Signed-off-by: Kees Cook <keescook@chromium.org>
Acked-by: Eric Paris <eparis@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-04-10 16:14:40 -07:00
Ondrej Zary
38ed1aef92 [media] radio-gemtek: add PnP support for AOpen FX-3D/Pro Radio
Add PnP support to radio-gemtek for AOpen FX-3D/Pro Radio card
(AD1816 + Gemtek radio).

Signed-off-by: Ondrej Zary <linux@rainbow-software.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-04-10 19:53:19 -03:00
Ondrej Zary
865d7ec934 [media] radio-isa: PnP support for the new ISA radio framework
Add PnP support to the new ISA radio framework.

Signed-off-by: Ondrej Zary <linux@rainbow-software.org>
Reviewed-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-04-10 19:52:16 -03:00
Linus Torvalds
94fb175c04 dmaengine-fixes for 3.4-rc3
1/ regression fix for Xen as it now trips over a broken assumption
    about the dma address size on 32-bit builds
 
 2/ new quirk for netdma to ignore dma channels that cannot meet
    netdma alignment requirements
 
 3/ fixes for two long standing issues in ioatdma (ring size overflow)
    and iop-adma (potential stack corruption)
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.12 (GNU/Linux)
 
 iQIcBAABAgAGBQJPhIfhAAoJEB7SkWpmfYgCguIQAL4qF+RC9/JggSHIjfOrYiPd
 yboV80GqqQHHBwy8hfZVUrIEPMebvD/xUIk6iUQNXR+6EA8Ln0jukvQMpWNnI+Cc
 TXgA5Ok70an4PD1MqnCsWyCJjsyPyhprbRHurxBcesf+y96POJxhING0rcKvft50
 mvYnbtrkYe9M9x3b8TBGc0JaTVeL29Ck3FtkTz4uUktbkhRNfCcfEd28NRQpf8MB
 vkjbjRGBQmGsnKxYCaEhlF1GPJyTlYjg4BBWtseJgb2R9s7tvJrkotFea/NmSfjq
 XCuVKjpiFp3YyJuxJERWdwqRWvyAZFfcYyZX440nG0b7GBgSn+T7A9XhUs8vMboi
 tLwoDfBbJDlKMaFpHex7Z6RtZZmVl3gWDNZTqpG44n4pabd4RPip04f0k7Wfs+cp
 tzU9hGAOvgsZ8w4/JgxH8YJOZbIGzbDGOA1IhWcbxIbmFTblMiFnV3TC7qfhoRbR
 8qtScIE7bUck2MYVlMMn9utd9tvKFa6HNgo41+f78/4+U7zQ/VrsbA/DWQct40R5
 5k+EEvyYFUzIXn79E0GVN5h4NHH5gfAs3MZ7jIgwgHedBp4Ki68XYKNu+pIV3YwG
 CFTPn1mVOXnCdt+fsjG5tL9Jecx1Mij6w3nWU93ZU6cHmC77YmU+DLxPIGuyR1a2
 EmpObwfq5peXzkgQpEsB
 =F3IR
 -----END PGP SIGNATURE-----

Merge tag 'dmaengine-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/djbw/dmaengine

Pull dmaengine fixes from Dan Williams:

1/ regression fix for Xen as it now trips over a broken assumption
   about the dma address size on 32-bit builds

2/ new quirk for netdma to ignore dma channels that cannot meet
   netdma alignment requirements

3/ fixes for two long standing issues in ioatdma (ring size overflow)
   and iop-adma (potential stack corruption)

* tag 'dmaengine-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/djbw/dmaengine:
  netdma: adding alignment check for NETDMA ops
  ioatdma: DMA copy alignment needed to address IOAT DMA silicon errata
  ioat: ring size variables need to be 32bit to avoid overflow
  iop-adma: Corrected array overflow in RAID6 Xscale(R) test.
  ioat: fix size of 'completion' for Xen
2012-04-10 15:30:16 -07:00
Jim Cromie
b330f606ed staging: replace open-coded ARRAY_SIZEs
spatch http://coccinelle.lip6.fr/rules/array.cocci did these.

Signed-off-by: Jim Cromie <jim.cromie@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-04-10 15:25:55 -07:00
Gerard Snitselaar
a46c46a1d7 usb: xhci: fix section mismatch in linux-next
xhci_unregister_pci() is called in xhci_hcd_init().

Signed-off-by: Gerard Snitselaar <dev@snitselaar.org>
Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
2012-04-10 15:21:53 -07:00
Alex He
bb334e90cc xHCI: correct to print the true HSEE of USBCMD
Correct the print of HSEE of USBCMD in xhci-dbg.c.

Signed-off-by: Alex He <alex.he@amd.com>
Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
2012-04-10 15:21:52 -07:00
Dan Williams
282029c005 kobject: provide more diagnostic info for kobject_add_internal() failures
1/ convert open-coded KERN_ERR+dump_stack() to WARN(), so that automated
   tools pick up this warning.

2/ include the 'child' and 'parent' kobject names.  This information was
   useful for tracking down the case where scsi invoked device_del() on a
   parent object and subsequently invoked device_add() on a child.  Now the
   warning looks like:

     kobject_add_internal failed for target8:0:16 (error: -2 parent: end_device-8:0:24)
     Pid: 2942, comm: scsi_scan_8 Not tainted 3.3.0-rc7-isci+ #2
     Call Trace:
      [<ffffffff8125e551>] kobject_add_internal+0x1c1/0x1f3
      [<ffffffff81075149>] ? trace_hardirqs_on+0xd/0xf
      [<ffffffff8125e659>] kobject_add_varg+0x41/0x50
      [<ffffffff8125e723>] kobject_add+0x64/0x66
      [<ffffffff8131124b>] device_add+0x12d/0x63a
      [<ffffffff8125e0ef>] ? kobject_put+0x4c/0x50
      [<ffffffff8132f370>] scsi_sysfs_add_sdev+0x4e/0x28a
      [<ffffffff8132dce3>] do_scan_async+0x9c/0x145

Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: James Bottomley <JBottomley@parallels.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-04-10 14:48:51 -07:00
Dan Williams
3a198886ab sysfs: handle 'parent deleted before child added'
In scsi at least two cases of the parent device being deleted before the
child is added have been observed.

1/ scsi is performing async scans and the device is removed prior to the
   async can thread running (can happen with an in-opportune / unlikely
   unplug during initial scan).

2/ libsas discovery event running after the parent port has been torn
   down (this is a bug in libsas).

Result in crash signatures like:
 BUG: unable to handle kernel NULL pointer dereference at 0000000000000098
 IP: [<ffffffff8115e100>] sysfs_create_dir+0x32/0xb6
 ...
 Process scsi_scan_8 (pid: 5417, threadinfo ffff88080bd16000, task ffff880801b8a0b0)
 Stack:
  00000000fffffffe ffff880813470628 ffff88080bd17cd0 ffff88080614b7e8
  ffff88080b45c108 00000000fffffffe ffff88080bd17d20 ffffffff8125e4a8
  ffff88080bd17cf0 ffffffff81075149 ffff88080bd17d30 ffff88080614b7e8
 Call Trace:
  [<ffffffff8125e4a8>] kobject_add_internal+0x120/0x1e3
  [<ffffffff81075149>] ? trace_hardirqs_on+0xd/0xf
  [<ffffffff8125e641>] kobject_add_varg+0x41/0x50
  [<ffffffff8125e70b>] kobject_add+0x64/0x66
  [<ffffffff8131122b>] device_add+0x12d/0x63a

In this scenario the parent is still valid (because we have a
reference), but it has been device_del()'d which means its kobj->sd
pointer is NULL'd via:

 device_del()->kobject_del()->sysfs_remove_dir()

...and then sysfs_create_dir() (without this fix) goes ahead and
de-references parent_sd via sysfs_ns_type():

 return (sd->s_flags & SYSFS_NS_TYPE_MASK) >> SYSFS_NS_TYPE_SHIFT;

This scenario is being fixed in scsi/libsas, but if other subsystems
present the same ordering the system need not immediately crash.

Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: James Bottomley <JBottomley@parallels.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-04-10 14:48:51 -07:00
Bruno Prémont
5631f2c18f sysfs: Prevent crash on unset sysfs group attributes
Do not let the kernel crash when a device is registered with
sysfs while group attributes are not set (aka NULL).

Warn about the offender with some information about the offending
device.

This would warn instead of trying NULL pointer deref like:
 BUG: unable to handle kernel NULL pointer dereference at (null)
 IP: [<ffffffff81152673>] internal_create_group+0x83/0x1a0
 PGD 0
 Oops: 0000 [#1] SMP
 CPU 0
 Modules linked in:

 Pid: 1, comm: swapper/0 Not tainted 3.4.0-rc1-x86_64 #3 HP ProLiant DL360 G4
 RIP: 0010:[<ffffffff81152673>]  [<ffffffff81152673>] internal_create_group+0x83/0x1a0
 RSP: 0018:ffff88019485fd70  EFLAGS: 00010202
 RAX: 0000000000000001 RBX: 0000000000000000 RCX: 0000000000000001
 RDX: ffff880192e99908 RSI: ffff880192e99630 RDI: ffffffff81a26c60
 RBP: ffff88019485fdc0 R08: 0000000000000000 R09: 0000000000000000
 R10: ffff880192e99908 R11: 0000000000000000 R12: ffffffff81a16a00
 R13: ffff880192e99908 R14: ffffffff81a16900 R15: 0000000000000000
 FS:  0000000000000000(0000) GS:ffff88019bc00000(0000) knlGS:0000000000000000
 CS:  0010 DS: 0000 ES: 0000 CR0: 000000008005003b
 CR2: 0000000000000000 CR3: 0000000001a0c000 CR4: 00000000000007f0
 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
 DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
 Process swapper/0 (pid: 1, threadinfo ffff88019485e000, task ffff880194878000)
 Stack:
  ffff88019485fdd0 ffff880192da9d60 0000000000000000 ffff880192e99908
  ffff880192e995d8 0000000000000001 ffffffff81a16a00 ffff880192da9d60
  0000000000000000 0000000000000000 ffff88019485fdd0 ffffffff811527be
 Call Trace:
  [<ffffffff811527be>] sysfs_create_group+0xe/0x10
  [<ffffffff81376ca6>] device_add_groups+0x46/0x80
  [<ffffffff81377d3d>] device_add+0x46d/0x6a0
  ...

Signed-off-by: Bruno Prémont <bonbons@linux-vserver.org>
Acked-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-04-10 14:48:51 -07:00
Fabio Estevam
b46ac308bf ASoC: wm9712: Fix build due to missing definition of "runtime"
Fix the following build error:

sound/soc/codecs/wm9712.c:482:32: error: 'runtime' undeclared (first use in this function)
sound/soc/codecs/wm9712.c:499:33: error: 'runtime' undeclared (first use in this function)

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-04-10 22:35:18 +01:00
Stephen Warren
8127bf5529 ASoC: tegra: utils: Don't use of_have_populated_dt()
Recent list discussions concluded that drivers should not be calling
of_have_populated_dt(), and hence of_have_populated_dt() should not be
exported. Use a different mechanism to detect DT vs. non-DT boot.

Signed-off-by: Stephen Warren <swarren@nvidia.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-04-10 22:33:19 +01:00
Johan Hovold
a65a6f14dc USB: serial: fix race between probe and open
Fix race between probe and open by making sure that the disconnected
flag is not cleared until all ports have been registered.

A call to tty_open while probe is running may get a reference to the
serial structure in serial_install before its ports have been
registered. This may lead to usb_serial_core calling driver open before
port is fully initialised.

With ftdi_sio this result in the following NULL-pointer dereference as
the private data has not been initialised at open:

[  199.698286] IP: [<f811a089>] ftdi_open+0x59/0xe0 [ftdi_sio]
[  199.698297] *pde = 00000000
[  199.698303] Oops: 0000 [#1] PREEMPT SMP
[  199.698313] Modules linked in: ftdi_sio usbserial
[  199.698323]
[  199.698327] Pid: 1146, comm: ftdi_open Not tainted 3.2.11 #70 Dell Inc. Vostro 1520/0T816J
[  199.698339] EIP: 0060:[<f811a089>] EFLAGS: 00010286 CPU: 0
[  199.698344] EIP is at ftdi_open+0x59/0xe0 [ftdi_sio]
[  199.698348] EAX: 0000003e EBX: f5067000 ECX: 00000000 EDX: 80000600
[  199.698352] ESI: f48d8800 EDI: 00000001 EBP: f515dd54 ESP: f515dcfc
[  199.698356]  DS: 007b ES: 007b FS: 00d8 GS: 0033 SS: 0068
[  199.698361] Process ftdi_open (pid: 1146, ti=f515c000 task=f481e040 task.ti=f515c000)
[  199.698364] Stack:
[  199.698368]  f811a9fe f811a9e0 f811b3ef 00000000 00000000 00001388 00000000 f4a86800
[  199.698387]  00000002 00000000 f806e68e 00000000 f532765c f481e040 00000246 22222222
[  199.698479]  22222222 22222222 22222222 f5067004 f5327600 f5327638 f515dd74 f806e6ab
[  199.698496] Call Trace:
[  199.698504]  [<f806e68e>] ? serial_activate+0x2e/0x70 [usbserial]
[  199.698511]  [<f806e6ab>] serial_activate+0x4b/0x70 [usbserial]
[  199.698521]  [<c126380c>] tty_port_open+0x7c/0xd0
[  199.698527]  [<f806e660>] ? serial_set_termios+0xa0/0xa0 [usbserial]
[  199.698534]  [<f806e76f>] serial_open+0x2f/0x70 [usbserial]
[  199.698540]  [<c125d07c>] tty_open+0x20c/0x510
[  199.698546]  [<c10e9eb7>] chrdev_open+0xe7/0x230
[  199.698553]  [<c10e48f2>] __dentry_open+0x1f2/0x390
[  199.698559]  [<c144bfec>] ? _raw_spin_unlock+0x2c/0x50
[  199.698565]  [<c10e4b76>] nameidata_to_filp+0x66/0x80
[  199.698570]  [<c10e9dd0>] ? cdev_put+0x20/0x20
[  199.698576]  [<c10f3e08>] do_last+0x198/0x730
[  199.698581]  [<c10f4440>] path_openat+0xa0/0x350
[  199.698587]  [<c10f47d5>] do_filp_open+0x35/0x80
[  199.698593]  [<c144bfec>] ? _raw_spin_unlock+0x2c/0x50
[  199.698599]  [<c10ff110>] ? alloc_fd+0xc0/0x100
[  199.698605]  [<c10f0b72>] ? getname_flags+0x72/0x120
[  199.698611]  [<c10e4450>] do_sys_open+0xf0/0x1c0
[  199.698617]  [<c11fcc08>] ? trace_hardirqs_on_thunk+0xc/0x10
[  199.698623]  [<c10e458e>] sys_open+0x2e/0x40
[  199.698628]  [<c144c990>] sysenter_do_call+0x12/0x36
[  199.698632] Code: 85 89 00 00 00 8b 16 8b 4d c0 c1 e2 08 c7 44 24 14 88 13 00 00 81 ca 00 00 00 80 c7 44 24 10 00 00 00 00 c7 44 24 0c 00 00 00 00 <0f> b7 41 78 31 c9 89 44 24 08 c7 44 24 04 00 00 00 00 c7 04 24
[  199.698884] EIP: [<f811a089>] ftdi_open+0x59/0xe0 [ftdi_sio] SS:ESP 0068:f515dcfc
[  199.698893] CR2: 0000000000000078
[  199.698925] ---[ end trace 77c43ec023940cff ]---

Reported-and-tested-by: Ken Huang <csuhgw@gmail.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Johan Hovold <jhovold@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-04-10 13:35:53 -07:00
Johan Hovold
af5810597a USB: io_ti: fix abuse of interface data
Fix abuse of interface data which was used to signal device disconnect.

Use the usb_serial disconnect flag and mutex where appropriate.

Note that there's no need to grab the mutex in chase_port as it does not
access the device.

Signed-off-by: Johan Hovold <jhovold@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-04-10 13:32:54 -07:00
Johan Hovold
5c0c7582a6 USB: whiteheat: reimplement using generic framework
Kill custom list-based read and write implementations and reimplement
using the generic framework.

Compile-only tested.

Signed-off-by: Johan Hovold <jhovold@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-04-10 13:32:07 -07:00
Johan Hovold
a6765cbafa USB: whiteheat: remove driver version
Remove driver version -- it's the kernel version that matters.

Signed-off-by: Johan Hovold <jhovold@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-04-10 13:32:07 -07:00
Aleksey Babahin
e2dd3af49a USB: serial: metro-usb: cosmetic fix in driver description.
Message in kernel log:
"metro-usb ttyUSB0: Metrologic USB to Serial converter now disconnected from ttyUSB0"

bit more likely than:
"metro-usb ttyUSB0: Metrologic USB to serial converter. converter now disconnected from ttyUSB0"

Signed-off-by: Aleksey Babahin <tamerlan311@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-04-10 13:30:38 -07:00
Aleksey Babahin
41dc294002 USB: serial: metro-usb: remove duplicated #include <linux/errno.h>
Signed-off-by: Aleksey Babahin <tamerlan311@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-04-10 13:30:37 -07:00
Aleksey Babahin
bd2c09bc20 USB: serial: metro-usb: make debug messages bit more informative.
In this place result value is always zero. Use urb->status instead.

Signed-off-by: Aleksey Babahin <tamerlan311@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-04-10 13:30:37 -07:00
Aleksey Babahin
91fbecfe59 USB: serial: metro-usb: print errors always, not only in debug mode.
Signed-off-by: Aleksey Babahin <tamerlan311@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-04-10 13:30:37 -07:00
Aleksey Babahin
704577861d USB: serial: metro-usb: get data from device in Uni-Directional mode.
We should send special control command to tell device start or stop
transmitting a data.

In Bi-Directional mode that cmd`s are not required.

Signed-off-by: Aleksey Babahin <tamerlan311@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-04-10 13:30:37 -07:00
Aleksey Babahin
28a4b6a690 USB: serial: metro-usb: dummy implement write_int_callback() function.
This function is never called now. Because we don`t send much data
to the device, only one byte via usb_interrupt_msg(). That doesn't require
callback function. But without declaration of write_int_callback inside
the struct usb_serial_driver, the usb_serial_probe doesn't initialize
endpoint address for the interrupt out pipe(interrupt_out_endpointAddress).
This endpoint is necessary for sending data via usb_interrupt_msg()
function.

Signed-off-by: Aleksey Babahin <tamerlan311@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-04-10 13:30:37 -07:00
Aleksey Babahin
810ec78e9a USB: serial: metro-usb: Fix idProduct for Uni-Directional mode.
The right idProduct for Metrologic Bar Code Scanner
in Uni-Directional Serial Emulation mode is 0x0700.

Also rename idProduct for Bi-Directional mode to be a bit more informative.

Signed-off-by: Aleksey Babahin <tamerlan311@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-04-10 13:30:36 -07:00
Jonathan Cameron
487db48506 staging:iio: use spi->irq valid rather than querying available modes
Given these drivers only try to add the trigger if a valid
irq is present it is clearer to check the same condition when
deciding whether to remove it on a later trigger.

Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-04-10 13:26:33 -07:00
Jonathan Cameron
8b1f52278f staging:iio:accel:lis3l02dq add symmetry to check for presence of trigger.
Checking indio_dev->modes is uggly and not symmetric with the conditions
on whether triggers are allowed in the first place.

Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-04-10 13:26:33 -07:00
Jonathan Cameron
0b27d678c7 staging:iio:max1363 enable use with inkernel interfaces.
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-04-10 13:26:33 -07:00
Jonathan Cameron
ecbf20ca95 staging:iio fill in some missing docs
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-04-10 13:26:33 -07:00
Jonathan Cameron
a9ea1b178f staging:iio:adc:max1363 fix missing update_scan_mask callback.
When moving over to the new sw_ring_preenable I managed to add
this callback to only one of the two iio_info structures. As
such only some devices will currently work.

Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-04-10 13:26:33 -07:00
Jonathan Cameron
09f78be78a staging:iio:buffer example fix typos
I have no idea how I managed to munge the previous
patch related to this.  Sorry all.

Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-04-10 13:26:32 -07:00
Roland Stigge
6270d830d0 gpio: Fix range check in of_gpio_simple_xlate()
of_gpio_simple_xlate() has an off-by-one bug where it checks to see if
args[0] is > ngpio instead of >=.  args[0] must always be less than
ngpio because it is a zero-based enumeration.

Signed-off-by: Roland Stigge <stigge@antcom.de>
[grant.likely: beef up commit text]
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2012-04-10 14:20:56 -06:00
Axel Lin
078dc65e61 gpio: Fix uninitialized variable bit in adp5588_irq_handler
The variable 'bit' is uninitialized in the first iteration of for
loop. Fix it.

Signed-off-by: Axel Lin <axel.lin@gmail.com>
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2012-04-10 14:20:55 -06:00
Grant Likely
3ffc9cebb6 gpio/sodaville: Convert sodaville driver to new irqdomain API
The irqdomain api changed significantly in v3.4 which caused a build
failure for this driver.

Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
Acked-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Cc: Hans J. Koch <hjk@linutronix.de>
Cc: Torben Hohn <torbenh@linutronix.de>
2012-04-10 14:20:55 -06:00
Sakari Ailus
8766e86535 [media] v4l: Mark VIDIOC_SUBDEV_G_CROP and VIDIOC_SUBDEV_S_CROP obsolete
These two IOCTLS are obsoleted by VIDIOC_SUBDEV_G_SELECTION and
VIDIOC_SUBDEV_S_SELECTION. Mark them obsolete.

Signed-off-by: Sakari Ailus <sakari.ailus@iki.fi>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-04-10 17:12:13 -03:00
Axel Lin
8ebb35fd7a spi: use module_pci_driver
This patch converts the drivers in drivers/spi/* to use module_pci_driver()
macro which makes the code smaller and a bit simpler.

Signed-off-by: Axel Lin <axel.lin@gmail.com>
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2012-04-10 14:11:34 -06:00
Sakari Ailus
955f645aea [media] v4l: Add subdev selections documentation
Add documentation for V4L2 subdev selection API. This changes also
experimental V4L2 subdev API so that scaling now works through selection API
only.

Signed-off-by: Sakari Ailus <sakari.ailus@iki.fi>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-04-10 17:11:27 -03:00
Sakari Ailus
59ef29cc86 [media] v4l: Add subdev selections documentation: svg and dia files
Add svga and dia files for V4L2 subdev selections documentation.

Signed-off-by: Sakari Ailus <sakari.ailus@iki.fi>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-04-10 17:11:21 -03:00
Shubhrajyoti D
39f8052d2e spi/omap2-mcspi: Trivial optimisation
Trivial optimisation of tmp variable by directly writing the value
to the register.

Cc: Tarun Kanti DebBarma <tarun.kanti@ti.com>
Signed-off-by: Shubhrajyoti D <shubhrajyoti@ti.com>
2012-04-10 14:11:03 -06:00
Shubhrajyoti D
27b5284cfb spi: omap2-mcspi: add support for pm_runtime autosuspend
Adds support for configuring the omap2-mcspi driver use autosuspend for
runtime power management. This can reduce the latency in starting an
spi transfer by not suspending the device immediately following
completion of a transfer. If another transfer then takes place before
the autosuspend timeout (2 secs), the call to resume the device can
return immediately saving some save/ restore cycles.

Acked-by: Govindraj.R <govindraj.raja@ti.com>
Signed-off-by: Shubhrajyoti D <shubhrajyoti@ti.com>
2012-04-10 14:10:51 -06:00
Benoit Cousson
1bd897f849 spi/omap: Remove bus_num usage for instance index
bus_num was used to reference the mcspi controller instance in a fixed array.
Remove this array and store this information directly inside drvdata structure.

bus_num is now just set if the pdev->id is present or with -1 for dynamic
allocation by SPI core, but the driver does not access it anymore.

Clean some bad comments format, and remove un-needed space.

Signed-off-by: Benoit Cousson <b-cousson@ti.com>
[Cleanup the OMAP2_MCSPI_MAX_CTRL macro as it is not needed anymore]
Signed-off-by: Shubhrajyoti D <shubhrajyoti@ti.com>
2012-04-10 14:10:35 -06:00
Grant Likely
aae730dfe2 Merge branch 'spi' of git://gitorious.org/linus-tree/linus-tree into spi/next 2012-04-10 14:09:56 -06:00
Stephen Warren
80881dae52 ARM: tegra: uncompress.h: Implement TEGRA_DEBUG_UART_AUTO_ODMDATA
Tegra has 5 UARTS which could be used for low-level debug output. Commit
fe26398 "ARM: tegra: uncompress.h: Choose a UART at runtime" implemented
one method for the kernel to automatically determine which of these to
use at run-time, so that the same DEBUG_LL-enabled kernel image could be
used across multiple Tegra boards. The required bootloader-side setup for
that option is implemented in NVIDIA's various downstream U-Boot branches,
but the U-Boot maintainers have refused to accept it upstream.

This change implements an alternative automatic UART selection option
using ODMDATA. This is a 32-bit value programmed into Tegra's boot memory
which provides a few pieces of basic board-specific information, including
a field that indicates the console UART. Setting up this value is part of
the standard Tegra boot architecture, and so requires no Tegra-specific
hacks in the bootloader's UART driver.

Note that in theory, the format of ODMDATA is board-specific. However, in
practice all boards use the same location/size/values for the UART field.
ODMDATA[19:18] (which drive the type of debug console) is more problematic,
since some boards use value 2 for UART and others use 3. This patch just
accepts either value; if this doesn't work well for a given board, I'd
suggest simply not enabling this debug option when building for that board.

Note that the kernel assumes the bootloader has already set up any required
pinmux settings for the UART; there is no way the kernel can do this for
itself prior to knowing which board it's running on. In practice, people
using this feature are highly likely to be using bootloaders that have
indeed configured the pinmux. This assumption existed prior to this patch.

Signed-off-by: Stephen Warren <swarren@nvidia.com>
2012-04-10 13:41:36 -06:00
Antonio Quartulli
78f9c85035 b43: claim support for IBSS RSN
The driver now claims to support IBSS/RSN. Group key configuration in hardware
is skipped. Software encryption is used for multicast communications.

Signed-off-by: Antonio Quartulli <ordex@autistici.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-04-10 15:20:34 -04:00
Javier Cardona
d299a1f21e {nl,cfg}80211: Support for mesh synchronization
Report Toffset to userspace.
Let userspace select the mesh synchronization method.

Signed-off-by: Marco Porsch <marco.porsch@s2005.tu-chemnitz.de>
Signed-off-by: Pavel Zubarev <pavel.zubarev@gmail.com>
Signed-off-by: Javier Cardona <javier@cozybit.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-04-10 15:20:33 -04:00
Javier Cardona
dbf498fbaf mac80211: Implement mesh synchronization framework
This patch adds MBSS extensible synchronization framework (Sec.
13.13.2 of IEEE Std. 802.11-2012).

The framework is implemented via an ops table which defines the
following functions:

    rx_bcn_presp() - this is called every time a mesh beacon is
received.
    adjust_tbtt() - this is called immediately before a beacon is about
to be transmitted.

The default neighbor offset synchronization defined in the standard is
implemented.  We also provide template functions for vendor specific
methods.

When neighbor offset synchronization is active (which is the default)
mesh neighbors in the same MBSS will track timing offsets to each other
and compensate clock drift.

In our tests we observed that this mesh synchronization implementation
successfully corrected drifts between stations of ~2PPM while
introducing a jitter of ~20us.

It is also possible to test this framework on mac80211_hwsim simulated
phys to see how it behaves under different topologies, over poor links,
etc.

Signed-off-by: Marco Porsch <marco.porsch@s2005.tu-chemnitz.de>
Signed-off-by: Pavel Zubarev <pavel.zubarev@gmail.com>
Signed-off-by: Javier Cardona <javier@cozybit.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-04-10 15:20:31 -04:00
Javier Cardona
9bdd3a6bf8 mac80211: Allow tsf increments via debugfs
Reading and writing back the tsf value via tsf is too slow if one wants
to make small increments to this timer.  With this change you can use
the syntax "+=<some value>" or "-=<some value>" to add or substract a
value from the tsf counter.

Signed-off-by: Javier Cardona <javier@cozybit.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-04-10 15:20:30 -04:00
Javier Cardona
f483ad25c3 mac80211_hwsim: Fill timestamp beacon at the time it is transmitted
Generate more acurate tsf values in hwsim by setting the tsf value on
trasmitted beacons immediately before they are moved to the rx path.
Also, adjust the beacon timestamp to be the time at which the first byte
of the timestamp is transmitted.

With these changes the observed tsf offset between two hwsim/mesh peers
is 0 (unless the offset is modified via debugfs)

Signed-off-by: Javier Cardona <javier@cozybit.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-04-10 15:20:29 -04:00
Stanislaw Gruszka
88c868c43b mac80211: sanity check for null SSID
While associated we should never have empty SSID, but life can be full
of surprises, and is allways better to print a warning than crash.

Before memcpy() in ieee80211_probereq_get() check ssid_len instead of
ssid pointer, sice pointer it always passed by "ssidie + 2" expression
to send probe functions, so practically never can be NULL.

Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-04-10 15:20:28 -04:00
Johannes Berg
32c5057b22 mac80211: use IEEE80211_NUM_ACS
When comparing hw->queues to determine if the
device is QoS capable, use IEEE80211_NUM_ACS
instead of just 4.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-04-10 14:56:10 -04:00