MAINTAINERS:
There's some re-jigging of things to reduce duplication, by moving me
into the StarFive entry and my tree into the Microchip one. The
other platforms that I look after (SiFive and Canaan) are marked as Odd
Fixes to better represent their status. Nothing functionally changes.
Microchip:
Add adc and mmc nodes for the Beagle-V Fire.
SiFive:
Add pwm fans to the unmatched board.
StarFive:
Add the Orange PI RV board, another VisionFive 2 derived SBC. This
required moving a mmc related nodes out of the common file, into
<board>.dts. Yet more things moved out of the common file when the
VisionFive 2 Lite boards were added, which use the JH7110S SoC instead of
the JH7110. The difference here between SoCs is just temperature and
frequency ranges, but the boards differ enough that the pool of common
nodes decreases a little further. There's an eMMC and an SD variant
here, that are different SKUs, bringing the total new StarFive boards to
three.
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRh246EGq/8RLhDjO14tDGHoIJi0gUCaSiH8AAKCRB4tDGHoIJi
0nvqAQCJMelvf23z8LR/GcUmJlB5eWc/+g5JAyy/4HiFH6hAiAEAgOPVRGjH3sav
3RGf+SFZWLRmPQcG2mguckc7I+RUSQo=
=g/Rw
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=pkzr
-----END PGP SIGNATURE-----
Merge tag 'riscv-dt-for-v6.19' of https://git.kernel.org/pub/scm/linux/kernel/git/conor/linux into soc/dt
RISC-V Devicetrees for v6.19
MAINTAINERS:
There's some re-jigging of things to reduce duplication, by moving me
into the StarFive entry and my tree into the Microchip one. The
other platforms that I look after (SiFive and Canaan) are marked as Odd
Fixes to better represent their status. Nothing functionally changes.
Microchip:
Add adc and mmc nodes for the Beagle-V Fire.
SiFive:
Add pwm fans to the unmatched board.
StarFive:
Add the Orange PI RV board, another VisionFive 2 derived SBC. This
required moving a mmc related nodes out of the common file, into
<board>.dts. Yet more things moved out of the common file when the
VisionFive 2 Lite boards were added, which use the JH7110S SoC instead of
the JH7110. The difference here between SoCs is just temperature and
frequency ranges, but the boards differ enough that the pool of common
nodes decreases a little further. There's an eMMC and an SD variant
here, that are different SKUs, bringing the total new StarFive boards to
three.
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
* tag 'riscv-dt-for-v6.19' of https://git.kernel.org/pub/scm/linux/kernel/git/conor/linux:
riscv: dts: starfive: add Orange Pi RV
dt-bindings: riscv: starfive: add xunlong,orangepi-rv
riscv: dts: starfive: Add VisionFive 2 Lite eMMC board device tree
riscv: dts: starfive: Add VisionFive 2 Lite board device tree
riscv: dts: starfive: Add common board dtsi for VisionFive 2 Lite variants
riscv: dts: starfive: jh7110-common: Move out some nodes to the board dts
dt-bindings: riscv: Add StarFive JH7110S SoC and VisionFive 2 Lite board
MAINTAINERS: degrade RISC-V MISC SOC SUPPORT to Odd Fixes
MAINTAINERS: add tree to RISC-V Microchip entry
MAINTAINERS: remove patchwork from RISC-V MISC SOC SUPPORT
MAINTAINERS: add Conor to StarFive entry
riscv: dts: sifive: unmatched: Add PWM controlled fans
riscv: dts: microchip: enable qspi adc/mmc-spi-slot on BeagleV Fire
dts: starfive: jh7110-common: split out mmc0 reset pins from common into boards
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The base address of JPEG decoder core 1 should start at 0x10000, and
have a size of 0x10000, i.e. it is right after core 0.
Instead the core has the same base address as core 0, and with a crazy
large size. This looks like a mixup of address and size cells when the
ranges were converted.
This causes the kernel to fail to register the second core due to sysfs
name conflicts:
sysfs: cannot create duplicate filename '/devices/platform/soc/soc:jpeg-decoder@1a040000/1a040000.jpgdec'
Fix up the address range.
Fixes: a9eac43d03 ("arm64: dts: mediatek: mt8195: Fix ranges for jpeg enc/decoder nodes")
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Acked-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20251127100044.612825-1-wenst@chromium.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The original addition of cache information for the Amlogic S922X SoC
used the wrong next-level cache node for CPU cores 100 and 101,
incorrectly referencing `l2_cache_l`. These cores actually belong to
the big cluster and should reference `l2_cache_b`. Update the device
tree accordingly.
Fixes: e7f85e6c15 ("arm64: dts: amlogic: Add cache information to the Amlogic S922X SoC")
Signed-off-by: Guillaume La Roque <glaroque@baylibre.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patch.msgid.link/20251123-fixkhadas-v1-1-045348f0a4c2@baylibre.com
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Add GPIO interrupt controller device.
Signed-off-by: Xianwei Zhao <xianwei.zhao@amlogic.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patch.msgid.link/20251105-irqchip-gpio-s6-s7-s7d-v1-4-b4d1fe4781c1@amlogic.com
[narmstrong: fixed applying on top of ao secure node]
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Add GPIO interrupt controller device.
Signed-off-by: Xianwei Zhao <xianwei.zhao@amlogic.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patch.msgid.link/20251105-irqchip-gpio-s6-s7-s7d-v1-3-b4d1fe4781c1@amlogic.com
[narmstrong: fixed applying on top of ao secure node]
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Add node for board info registers, which allows getting SoC family and
board revision.
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Xianwei Zhao <xianwei.zhao@amlogic.com>
Link: https://patch.msgid.link/20251119-soc-info-s6-s7-s7d-v3-5-1764c1995c04@amlogic.com
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Add node for board info registers, which allows getting SoC family and
board revision.
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Xianwei Zhao <xianwei.zhao@amlogic.com>
Link: https://patch.msgid.link/20251119-soc-info-s6-s7-s7d-v3-4-1764c1995c04@amlogic.com
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Add node for board info registers, which allows getting SoC family and
board revision.
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Xianwei Zhao <xianwei.zhao@amlogic.com>
Link: https://patch.msgid.link/20251119-soc-info-s6-s7-s7d-v3-3-1764c1995c04@amlogic.com
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
DT incorrectly specifies the 'DBI' region as 'ELBI'. DBI is a must have
region for DWC controllers as it has the Root Port and controller specific
registers, while ELBI has optional registers.
Hence, fix the DT for both Meson platforms.
Cc: stable+noautosel@kernel.org # Driver dependency
Fixes: 5b3a9c2092 ("arm64: dts: meson-axg: add PCIe nodes")
Fixes: 1f8607d597 ("arm64: dts: meson-g12a: Add PCIe node")
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@oss.qualcomm.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patch.msgid.link/20251101-pci-meson-fix-v1-2-c50dcc56ed6a@oss.qualcomm.com
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Add the IMX290 sensor node description to the device tree file,
which will be controlled via I2C bus with image data transmission
through MIPI CSI-2 interface.
Add CSI-2, adapter and ISP nodes for C3 family.
Signed-off-by: Keke Li <keke.li@amlogic.com>
Link: https://patch.msgid.link/20250918-b4-c3isp-v1-1-5f48db6516c9@amlogic.com
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Oranth Tanix TX9 Pro is based on the Amlogic Q200 reference design with
an S912 chip and the following specs:
- 3GB DDR3 RAM
- 32GB eMMC
- 10/100/1000 Base-T Ethernet
- AP6356 Wireless (802.11 b/g/n/ac, BT 5.0)
- HDMI 2.0a video
- VFD for clock/status
- 2x USB 2.0 ports
- IR receiver
- 1x Power LED (white)
- 1x Update/Reset button (underside)
- 1x micro SD card slot
Signed-off-by: Christian Hewitt <christianshewitt@gmail.com>
Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Link: https://patch.msgid.link/20250927125006.824293-2-christianshewitt@gmail.com
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
The Oranth Tanix TX9 Pro is an Android STB using the Amlogic S912 chip
Signed-off-by: Christian Hewitt <christianshewitt@gmail.com>
Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://patch.msgid.link/20250927125006.824293-1-christianshewitt@gmail.com
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Orange Pi RV is a SBC based on the StarFive VisionFive 2 board.
Orange Pi RV features:
- StarFive JH7110 SoC
- GbE port connected to JH7110 GMAC0 via YT8531 PHY
- 4x USB ports via VL805 PCIe USB controller connected to JH7110 pcie0
- M.2 M-key slot connected to JH7110 pcie1
- HDMI video output
- 3.5mm audio output
- Ampak AP6256 SDIO Wi-Fi/Bluetooth module on mmc0
- microSD slot on mmc1
- SPI NOR flash memory
- 24c02 EEPROM (read only by default)
Signed-off-by: Icenowy Zheng <uwu@icenowy.me>
Signed-off-by: E Shattow <e@freeshell.de>
[conor: amend comment to say what's missing]
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Add a common board dtsi for use by VisionFive 2 Lite and
VisionFive 2 Lite eMMC.
Acked-by: Emil Renner Berthing <emil.renner.berthing@canonical.com>
Tested-by: Matthias Brugger <mbrugger@suse.com>
Signed-off-by: Hal Feng <hal.feng@starfivetech.com>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Some node in this file are not used by the upcoming VisionFive 2 Lite
board. Move them to the board dts to prepare for adding the new
VisionFive 2 Lite device tree.
Tested-by: Matthias Brugger <mbrugger@suse.com>
Signed-off-by: Hal Feng <hal.feng@starfivetech.com>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Add device tree bindings for the StarFive JH7110S SoC
and the VisionFive 2 Lite board equipped with it.
JH7110S SoC is an industrial SoC which can run at -40~85 degrees centigrade
and up to 1.25GHz. Its CPU cores and peripherals are the same as
those of the JH7110 SoC.
VisionFive 2 Lite boards have MicroSD card version (default) and eMMC
version, which are called "VisionFive 2 Lite" and "VisionFive 2 Lite eMMC"
respectively.
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Tested-by: Matthias Brugger <mbrugger@suse.com>
Reviewed-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Signed-off-by: Hal Feng <hal.feng@starfivetech.com>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
The SiFive and Canaan platforms are not being actively looked after at
this point, but fixes for them would be applied if/when the patches
appeared. Since they're now the only things in the RISC-V MISC SOC
SUPPORT, mark them as Odd Fixes. I don't believe this is a functional
change, it just represents what's actually happening - particularly
since the Canaan k230 never built up enough steam to get merged and the
new SiFive demo chips have been done in partnership with with other
companies, e.g. Eswin, and will reside in their directories instead.
Reviewed-by: Paul Walmsley <pjw@kernel.org>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
In fairness to my own employer, lumping it in as "misc" is not quite
accurate when they do pay me to look after the platform. Move the tree
link for it to its entry, rather than having the RISC-V MISC SOC SUPPORT
entry cover it.
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
I don't use the main riscv patchwork for anything to do with SoCs,
remove them from here to avoid confusion.
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
I apply the patches for StarFive devicetrees, add me to the entry along
with my tree location etc. This is not a functional change, as this info
was in the "RISC-V MISC" entry but I'd rather not have the duplication
of entries covering the StarFive directory.
Acked-by: Emil Renner Berthing <kernel@esmil.dk>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Asus Tinkerboard 3 + 3S.
Additional peripherals enabled on 100ASK DshanPi A1, Orange Pi 3B,
Indiedroid Nova, QNAP-TSx33 series + LED states on Radxa boards,
power-domains for the previously added RK3368 display components.
-----BEGIN PGP SIGNATURE-----
iQFEBAABCAAuFiEE7v+35S2Q1vLNA3Lx86Z5yZzRHYEFAmkk07cQHGhlaWtvQHNu
dGVjaC5kZQAKCRDzpnnJnNEdgSbNB/9Yp0zMIh32zhhsgOC6rjsFJFRDpriEogij
5YjZIHdYcScPcufMB9CfpwKzEXf40TP6x5xxkyaaEc6rZRTCBD+7XC5J4t2xBS0I
aIvl4RuRs1xb5MkWccoJP/xVXykWIaBju6I+Feqzt6O6KRoNJd+O/N4nkPazIF1F
6bvJrD5vLkl2vWBO1VCUBzGOMGiSwKUJf8uiUeTHHSuEn+O1xGLrQkvgUQOFrBnH
IC3OORMT0u3yQujblr1/B8KCaUeuQIRHlLH8IjEoJUvRv1ay5pNc7s0NYrgHrzRZ
H+DcT65hhwhq3pqA90rEusU9RBZp5MlQ6T1Jv7Z4M3GRXsTduW+1
=yhUe
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=xuz3
-----END PGP SIGNATURE-----
Merge tag 'v6.19-rockchip-dts64-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into soc/dt
New boards: QNAP TS233 (2-bay variant of the RK3568 NAS series) and
Asus Tinkerboard 3 + 3S.
Additional peripherals enabled on 100ASK DshanPi A1, Orange Pi 3B,
Indiedroid Nova, QNAP-TSx33 series + LED states on Radxa boards,
power-domains for the previously added RK3368 display components.
* tag 'v6.19-rockchip-dts64-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip: (22 commits)
arm64: dts: rockchip: enable RTC for 100ASK DshanPi A1
arm64: dts: rockchip: enable USB for 100ASK DshanPi A1
arm64: dts: rockchip: enable button for 100ASK DshanPi A1
arm64: dts: rockchip: add mmc aliases for 100ASK DshanPi A1
arm64: dts: rockchip: remove mmc max-frequency for 100ASK DshanPi A1
arm64: dts: rockchip: Enable i2c2 on Orange Pi 3B
arm64: dts: rockchip: Use default-state for power LED for Radxa boards
arm64: dts: rockchip: fix PCIe 3.3V regulator voltage on 9Tripod X3568 v4
arm64: dts: rockchip: Add power-domain to RK3368 VOP controller
arm64: dts: rockchip: Add power-domain to RK3368 DSI controller
arm64: dts: rockchip: Add host wake pin for wifi on Indiedroid Nova
arm64: dts: rockchip: Correct pinctrl for pcie for Indiedroid Nova
arm64: dts: rockchip: Define regulator for pcie2x1l2 on Indiedroid Nova
arm64: dts: rockchip: Add clk32k_in for Indiedroid Nova
arm64: dts: rockchip: Add Asus Tinker Board 3 and 3S device tree
dt-bindings: arm: rockchip: Add Asus Tinker Board 3/3S
dt-bindings: arm: rockchip: merge Asus Tinker and Tinker S
arm64: dts: rockchip: add QNAP TS233 devicetree
dt-bindings: arm: rockchip: add TS233 to RK3568-based QNAP NAS devices
arm64: dts: rockchip: move common qnap tsx33 parts to dtsi
...
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The various "syscon" nodes in SC9860 are only referenced by clock
provider nodes in a 1:1 relationship, and nothing else references the
"syscon" nodes. There's no apparent reason for this split. The 2 nodes
can simply be merged into 1 node. The clock driver has supported using
either "reg" or "sprd,syscon" to access registers from the start, so
there shouldn't be any compatibility issues.
With this, DT schema warnings for missing a specific compatible with
"syscon" and non-MMIO devices on "simple-bus" are fixed.
Reviewed-by: Chunyan Zhang <zhang.lyra@gmail.com>
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/r/20251124210031.767382-2-robh@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
This adds the two PWM-controlled fans of the HiFive Unmatched board to
the device tree.
Signed-off-by: René Rebe <rene@exactco.de>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Enable USB support for the 100ASK DshanPi A1 board.
Note that the HUSB311 Type-C chip is not supported.
Signed-off-by: Chukun Pan <amadeus@jmu.edu.cn>
Link: https://patch.msgid.link/20251120120011.279104-5-amadeus@jmu.edu.cn
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
The max-frequency property is already defined in the mmc
node of rk3576.dtsi. Remove the redundant definition.
Signed-off-by: Chukun Pan <amadeus@jmu.edu.cn>
Reviewed-by: Shawn Lin <shawn.lin@rock-chips.com>
Link: https://patch.msgid.link/20251120120011.279104-2-amadeus@jmu.edu.cn
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Late fixes and cleanups:
* Fix build warnings for unapplied overlays for PHYTEC, SA67 and certain TI EVM
* Fix pinmux of SD regulator control line on J721e SK
* Correct unit address of cbass_wakeup node for AM62L
-----BEGIN PGP SIGNATURE-----
iIYEABYIAC4WIQRQBrqaOmQ441h4YbUDQj8NV+8d1wUCaSAY7BAcdmlnbmVzaHJA
dGkuY29tAAoJEANCPw1X7x3XzpkBAPn1pdoqPU6YplG0Ajz8LnqlT/HOBFPBvk02
m5MgX9UsAP9n5d0ssAUkAFYoUDCNM2nvlzQtm+HuRS9RRrWrocWkCA==
=PSDa
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=iXKo
-----END PGP SIGNATURE-----
Merge tag 'ti-k3-dt-for-v6.19-part2' of https://git.kernel.org/pub/scm/linux/kernel/git/ti/linux into soc/dt
TI K3 device tree updates for v6.19 part2
Late fixes and cleanups:
* Fix build warnings for unapplied overlays for PHYTEC, SA67 and certain TI EVM
* Fix pinmux of SD regulator control line on J721e SK
* Correct unit address of cbass_wakeup node for AM62L
* tag 'ti-k3-dt-for-v6.19-part2' of https://git.kernel.org/pub/scm/linux/kernel/git/ti/linux:
arm64: dts: ti: k3-am62l: Fix unit address of cbass_wakeup
arm64: dts: ti: k3-j721e-sk: Fix pinmux for pin Y1 used by power regulator
arm64: dts: ti: Add missing applied DT overlay targets
arm64: dts: ti: sa67: add build time dtb for overlays
arm64: dts: ti: Enable build testing of PHYTEC board overlays
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Sophgo:
For CV18xx serials:
Add top syscon device related DTS change, the top system
controller provides register access to configure some
misc modules, such as usb2 phy and a dma multiplexer.
For SG2042:
There are two changes. The first one is to add DTS
definition for PCIe controllers for SoC SG2042 and
boards such as Pioneerbox/EVB_V1/EVB_V2 uses SG2042.
The second one is to add DTS to support SPI-NOR flash
controllers for this SoC and the same for related boards.
Signed-off-by: Chen Wang <unicorn_wang@outlook.com>
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQTYPcWJ6By3aFu8IuKHG95Quc97dgUCaR1vJAAKCRCHG95Quc97
dm3BAP9eP96c/3Irv4be9+WmINoNDXXxfoVxH5OVpqLbDge23AEA+KfP3pHOTWrU
keb2z7sjWek0QoDatdPL5HQojQ1IRQ0=
=Iio2
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEEo6/YBQwIrVS28WGKmmx57+YAGNkFAmkgxd0ACgkQmmx57+YA
GNntoRAAs4ms5xkTrGuhAc60jReKxL69NFaYPLH25ia82yIVlph9hqOyiDK1vLpj
mIsz/cbl6N8HU6u7IuhoWtUzrHA6FtbUgt+0y2C9Sj5lEA2sSEuqMXvlTd4njLhO
4U/ICxl8w4SjioEqDzZUI76fDGkOVQDmAExru/Yr20jxYpvmE+0//39GwP0HMU4v
3/GNNvshJtowtIyAehJNQcAaqc8A7kLo3o5jv6xrmhvWpfkxCmnMMHS6tEKgjfBm
2fhDc6PZJJtixcR4jVxo6u1cdcdMvCmAf+KPLj4KiMcouGj5QVpXJLaB7pHGDksf
FAuROrd2OHGOCb++gNZPriNrsU4tEFNjhp+m3OYJUS8GoVcym+oNjdnEBB2rADyf
S8bhGnEa2/fBHJ8PlnvrBGMGqC2i3q2Q7ECxEluKGXgWtOMhLmSquq4N8896EFOT
zr5UnBrv9kzIGGjfbMw6ALSXAQ9UhPD3Jm6YpvkGJfSN6o5ZvLlFG9XeVgqrpBmJ
l6UL5Nhrx9Q6LEwCpjz62PWL8bI7djn3ueFZGq+EzYnCvGEvpqw/+0ga22MqNK9D
W02TJQO6liARz90GR1XWLbndqmFjhBx3VNg0s5V2EJIYBFptNp7kCRVl/3OAw4Lh
JjA14DJSiv2xlyI6ZBVm1j/IiyfakZdBnlE6cmSom3YTGSPj7C8=
=cDbk
-----END PGP SIGNATURE-----
Merge tag 'riscv-sophgo-dt-for-v6.19' of https://github.com/sophgo/linux into soc/dt
RISC-V Devicetrees for v6.19
Sophgo:
For CV18xx serials:
Add top syscon device related DTS change, the top system
controller provides register access to configure some
misc modules, such as usb2 phy and a dma multiplexer.
For SG2042:
There are two changes. The first one is to add DTS
definition for PCIe controllers for SoC SG2042 and
boards such as Pioneerbox/EVB_V1/EVB_V2 uses SG2042.
The second one is to add DTS to support SPI-NOR flash
controllers for this SoC and the same for related boards.
Signed-off-by: Chen Wang <unicorn_wang@outlook.com>
* tag 'riscv-sophgo-dt-for-v6.19' of https://github.com/sophgo/linux:
riscv: dts: sophgo: Enable SPI NOR node for SG2042_EVB_V2
riscv: dts: sophgo: Enable SPI NOR node for SG2042_EVB_V1
riscv: dts: sophgo: Enable SPI NOR node for PioneerBox
riscv: dts: sophgo: Add SPI NOR node for SG2042
riscv: dts: sophgo: Add USB support for cv18xx
riscv: dts: sophgo: Add syscon node for cv18xx
dt-bindings: soc: sophgo: add TOP syscon for CV18XX/SG200X series SoC
riscv: sophgo: dts: enable PCIe for SG2042_EVB_V2.0
riscv: sophgo: dts: enable PCIe for SG2042_EVB_V1.X
riscv: sophgo: dts: enable PCIe for PioneerBox
riscv: sophgo: dts: add PCIe controllers for SG2042
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Highlights:
-----------
- MPU:
- STM32MP13:
- Add and enable the ARM SMC watchdog to use IWDG1 in the secure
world.
- STMP32MP15:
- Phytec SOM: Fix STMPE811 touchscreen
- LXA: drop unnecessary vusb_d/a-supply as already defined by
"phy-supply" and "vdda1v8-supply".
- STM32MP23:
- Use the RIFSC as an access controler (firewall) as it is done
for STM32MP25 and STM32MP23.
- STM32MP25:
- Add OSPI memory region name.
- Add I/O synchronization properties to satisfy RGMII
specification.
-----BEGIN PGP SIGNATURE-----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=iYLR
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEEo6/YBQwIrVS28WGKmmx57+YAGNkFAmkgw1YACgkQmmx57+YA
GNnLoQ//eRHBSHu1OZ91nDtsGE3G3msy5mrpqVjM6jvanK5TU1KI1h1n/TRUfK4v
n7vCELIAuImjrYUFu0HtbKZ2axdRcnlAS7Jj2KD21SdT8gXG/C4dor5gvdZe7dYH
ArFusLEV0NeG/6kMUs84J1Rh1u77TfnNi7+wQtSuhu9RV/0qL91Mtpom3NlzZOzS
7iIh1IK4RtoiJWbnj+LUFMdTke2kLb6Y+n2IDGyEoSPBWUjmsnyhk7EJtnN/t2JZ
CpjNFYgaqQvtA5dBIwGnaL2V8Trt9v65XfbOorH6dmm1v4BhpU3O/SN3d/nA9/et
NYnQSavU4yr/isrhvJsys2lKTFk34xpbVe4+Derkt5+aONWy0/BBL1D2rmQwAor0
bYpqK2WfoJ6O0XWMLGqHbYi4KsZqIFn/Gak6xRaxsdEMfJDMCqT/v/uu6MjNGioY
8EJTdzn5Y5K2syObQ/XknF2/2WPubY+ftjBFh2WUoL39JIn5nzeDuyH1XXirQ2Sp
2d4/D9uai/SAGVderH/5a1NyOr9B9gTr4gneWIdvTWYFeYQdk49BNwe4+DND40XD
8ey2XLL0aEfpeQNc5Q5P2wuaFMsqMI4lvQF/hCkfVdSmY1am7x9FuWjM8VwuHeg9
w/jv7RB39pQCobr5BhlOOKY+NX76MMf74Hd9iS8RQNQBGpgVFi8=
=dzuB
-----END PGP SIGNATURE-----
Merge tag 'stm32-dt-for-v6.19-1' of git://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32 into soc/dt
STM32 DT for v6.19, round 1
Highlights:
-----------
- MPU:
- STM32MP13:
- Add and enable the ARM SMC watchdog to use IWDG1 in the secure
world.
- STMP32MP15:
- Phytec SOM: Fix STMPE811 touchscreen
- LXA: drop unnecessary vusb_d/a-supply as already defined by
"phy-supply" and "vdda1v8-supply".
- STM32MP23:
- Use the RIFSC as an access controler (firewall) as it is done
for STM32MP25 and STM32MP23.
- STM32MP25:
- Add OSPI memory region name.
- Add I/O synchronization properties to satisfy RGMII
specification.
* tag 'stm32-dt-for-v6.19-1' of git://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32:
arm64: dts: st: set RIFSC as an access controller on stm32mp21x platforms
ARM: dts: stm32: add the IWDG2 interrupt line in stm32mp131.dtsi
ARM: dts: stm32: enable the ARM SMC watchdog node in stm32mp135f-dk
ARM: dts: stm32: add the ARM SMC watchdog in stm32mp131.dtsi
ARM: dts: stm32: add iwdg1 node in stm32mp131.dtsi
arm64: dts: st: Add I/O sync to eth pinctrl in stm32mp25-pinctrl.dtsi
arm64: dts: st: Add memory-region-names property for stm32mp257f-ev1
ARM: dts: stm32: lxa: drop unnecessary vusb_d/a-supply
ARM: dts: stm32: stm32mp157c-phycore: Fix STMPE811 touchscreen node properties
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
FriendlyElec NanoPi R76S
Interesting archeological addition: RK3368 (2015) gets display
output afterall.
New peripherals: vicap on px30 and rk356x, PCIe Gen2x1 on RK3528,
use actual clock-ids for SCMI clocks - not hardcoded numbers,
CQE support for the eMMC on RK3588.
As well as a number of enablements for individual boards.
For example enablement for the now usable NPU.
-----BEGIN PGP SIGNATURE-----
iQFEBAABCAAuFiEE7v+35S2Q1vLNA3Lx86Z5yZzRHYEFAmkbnhoQHGhlaWtvQHNu
dGVjaC5kZQAKCRDzpnnJnNEdgRQFB/0VpxuWvUfs4FFNI4yB+UgN3+lvY3Y4tdZQ
4cQg9QuwhMqmiNLc/uEUEjMiET0Yqw1ycIVzGXhfyw16htw2X1X+Y+gJC/0rakS9
Eyk/jDBGi7/rFarVwZMeOxl07DKfQpiSumAWFyz1ww8U19YeXNY5UiXXIq4811Zn
z1yJddMjLJi8vlHGRrVD4L7pwhrppEdFKihPaaQfFaTDk3SwXNEk7I+hjzt3v94r
syURDuAMHZ2Yriz4mcp2bMtB63NN5JR6/WOHzXEHv9jueJ2vZvpxs1075vQCSq5V
7ckoFTLftSbZE1N3CGHmBnLZX4gEoUgRclxlbzIQ7LP55nk91IFJ
=uKf+
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=eKTU
-----END PGP SIGNATURE-----
Merge tag 'v6.19-rockchip-dts64-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into soc/dt
New boards: 9Tripod X3568, 100ASK DShanPi A1, LinkEase EasePi R1,
FriendlyElec NanoPi R76S
Interesting archeological addition: RK3368 (2015) gets display
output afterall.
New peripherals: vicap on px30 and rk356x, PCIe Gen2x1 on RK3528,
use actual clock-ids for SCMI clocks - not hardcoded numbers,
CQE support for the eMMC on RK3588.
As well as a number of enablements for individual boards.
For example enablement for the now usable NPU.
* tag 'v6.19-rockchip-dts64-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip: (43 commits)
arm64: dts: rockchip: add vicap node to rk356x
arm64: dts: rockchip: add the vip node to px30
arm64: dts: rockchip: fixes audio for 100ASK DshanPi A1
arm64: dts: rockchip: fixes vcc3v3_s0 supply for 100ASK DshanPi A1
arm64: dts: rockchip: fixes ethernet for 100ASK DshanPi A1
arm64: dts: rockchip: fixes regulator for 100ASK DshanPi A1
arm64: dts: rockchip: correct assigned-clock-rates spelling on 2 boards
arm64: dts: rockchip: clean up devicetree for 9Tripod X3568 v4
arm64: dts: rockchip: Enable USB-C DP Alt for Indiedroid Nova
arm64: dts: rockchip: add eMMC CQE support for rk3588
arm64: dts: rockchip: enable HDMI audio on Rock 5 ITX
arm64: dts: rockchip: Add eeprom vcc-supply for Radxa ROCK 3C
arm64: dts: rockchip: Add eeprom vcc-supply for Radxa ROCK 5A
arm64: dts: rockchip: Move the EEPROM to correct I2C bus on Radxa ROCK 5A
arm64: dts: rockchip: use SCMI clock id for gpu clock on rk356x
arm64: dts: rockchip: Remove sdmmc max-frequency on RK3588S EVB1 board
arm64: dts: rockchip: Remove sdmmc max-frequency for Radxa ROCK 5 ITX/5B/5B+/5T
arm64: dts: rockchip: Switch microSD card detect to gpio on Radxa ROCK 5 ITX/5C
arm64: dts: rockchip: Add devicetree for the 9Tripod X3568 v4
dt-bindings: arm: rockchip: Add 9Tripod X3568 series
...
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Introduce support for the Redxa Dragon Q6A development board, the Huawei
MateBoot E 2019, the Asus ZenFone 2 Laser/Selfie, the MSM8937 platform
and the Xiaomo Redmi 3S device based on it.
SoC dtsi files for Agatti, Hamoa, Kodiak, Monaco, Purwa, and Talos, are
renamed in order to better facilitate the addition of new boards on the
various SKUs of these.
Cooling maps are introduced for the CPU cores in IPQ5424, and the
network subsystem clock controller is added.
On Lemans, RTC is enabled, the EVK fan controller is described and a
camera mezzanine overlay is introduced.
Touchscreen support is added to the BQ Aquaris M5, and the touchscreen
from Samsung Galaxy Core Prime is moved to the common platform to
benefit the other devices sharing common definitions.
On Agatti two more UARTs are described, as well as APR and the related audio
services, and the LPASS LPI pin controller. The RB1 board gets HDMI
autio playback support.
On Kodiak-based targets, Fairphone FP5 gains definitions of the UW camera
actuator, regulator for the ToF sensor, and haptic module. The SHIFT
SHIFTphone 8 gains RGB and flash LEDs, and Venus support. The Rb3Gen2
development board gets QUP firmware path defined, to support dynamic
loading of the serial engine firmware. Kodiak also gains Coresight
devices for AOSS and QDSS blocks.
Display support is added for the Talos platform, and enabled on the Ride
board. Talos also gains the definitions to scale DDR and L3
interconnects.
On SC8280XP, the camera privacy indicator on Lenovo Thinkpad X13s is
connected to the camera stack. Off-by-one GPI DMA channels are
corrected.
The SDM845-based LG and OnePlus custom defined rmtfs guard pages are
replaced with the inline-support for guard pages.
SDX75 DWC3 node is flattened and marked for USB role switching.
On SM8550, the camera subsystem and the S5K3M5 camera sensor is
introduced for the QRD, and an overlay for the "Rear Camera Card" for
the Hardware Development Kit (HDK) is introduced.
USB support is introduce for the SM8750 platform, and enabled in the MTP
and QRD devices.
On Hamoa, like on other devices the Asus Zenbook A14 definition of the
eDP panel is reworked to support both LCD and OLED configurations. WiFi
and Bluetooth is also enabled on the A14. The CRD gains support for
controlling charge limits.
The refgen regulator supplying DSI is defined and wired up on a variety
of platforms.
-----BEGIN PGP SIGNATURE-----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=RdUz
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=LTIM
-----END PGP SIGNATURE-----
Merge tag 'qcom-arm64-for-6.19' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into soc/dt
Qualcomm Arm64 DeviceTree updates for v6.19
Introduce support for the Redxa Dragon Q6A development board, the Huawei
MateBoot E 2019, the Asus ZenFone 2 Laser/Selfie, the MSM8937 platform
and the Xiaomo Redmi 3S device based on it.
SoC dtsi files for Agatti, Hamoa, Kodiak, Monaco, Purwa, and Talos, are
renamed in order to better facilitate the addition of new boards on the
various SKUs of these.
Cooling maps are introduced for the CPU cores in IPQ5424, and the
network subsystem clock controller is added.
On Lemans, RTC is enabled, the EVK fan controller is described and a
camera mezzanine overlay is introduced.
Touchscreen support is added to the BQ Aquaris M5, and the touchscreen
from Samsung Galaxy Core Prime is moved to the common platform to
benefit the other devices sharing common definitions.
On Agatti two more UARTs are described, as well as APR and the related audio
services, and the LPASS LPI pin controller. The RB1 board gets HDMI
autio playback support.
On Kodiak-based targets, Fairphone FP5 gains definitions of the UW camera
actuator, regulator for the ToF sensor, and haptic module. The SHIFT
SHIFTphone 8 gains RGB and flash LEDs, and Venus support. The Rb3Gen2
development board gets QUP firmware path defined, to support dynamic
loading of the serial engine firmware. Kodiak also gains Coresight
devices for AOSS and QDSS blocks.
Display support is added for the Talos platform, and enabled on the Ride
board. Talos also gains the definitions to scale DDR and L3
interconnects.
On SC8280XP, the camera privacy indicator on Lenovo Thinkpad X13s is
connected to the camera stack. Off-by-one GPI DMA channels are
corrected.
The SDM845-based LG and OnePlus custom defined rmtfs guard pages are
replaced with the inline-support for guard pages.
SDX75 DWC3 node is flattened and marked for USB role switching.
On SM8550, the camera subsystem and the S5K3M5 camera sensor is
introduced for the QRD, and an overlay for the "Rear Camera Card" for
the Hardware Development Kit (HDK) is introduced.
USB support is introduce for the SM8750 platform, and enabled in the MTP
and QRD devices.
On Hamoa, like on other devices the Asus Zenbook A14 definition of the
eDP panel is reworked to support both LCD and OLED configurations. WiFi
and Bluetooth is also enabled on the A14. The CRD gains support for
controlling charge limits.
The refgen regulator supplying DSI is defined and wired up on a variety
of platforms.
* tag 'qcom-arm64-for-6.19' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (138 commits)
arm64: dts: qcom: sdx75: Add missing usb-role-switch property
arm64: dts: qcom: sdx75: Flatten usb controller node
arm64: dts: qcom: HAMOA-IOT-SOM: Unreserve GPIOs blocking SPI11 access
arm64: dts: qcom: qrb2210-rb1: Fix UART3 wakeup IRQ storm
Revert "arm64: dts: qcom: sc7280: Increase config size to 256MB for ECAM feature"
arm64: dts: qcom: kodiak: add coresight nodes
arm64: dts: qcom: sdm845-oneplus: Describe TE gpio
arm64: dts: qcom: sdm845-oneplus: Implement panel sleep pinctrl
arm64: dts: qcom: sdm845-oneplus: Group panel pinctrl
arm64: dts: qcom: sdm845-oneplus: Update compatbible and add DDIC supplies
arm64: dts: qcom: qcs6490-rb3gen2: Rename vph-pwr regulator node
arm64: dts: qcom: qcm6490-fairphone-fp5: Add UW cam actuator
arm64: dts: qcom: qcm6490-fairphone-fp5: Enable CCI pull-up
arm64: dts: qcom: sm8750: Add USB support for SM8750 QRD platform
arm64: dts: qcom: sm8750: Add USB support for SM8750 MTP platform
arm64: dts: qcom: sm8750: Add USB support to SM8750 SoCs
arm64: dts: qcom: rename x1p42100 to purwa
arm64: dts: qcom: rename sc7280 to kodiak
arm64: dts: qcom: rename qcm2290 to agatti
arm64: dts: qcom: add gpu_zap_shader label
...
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
In addition to a variety of cleanups and reordering of nodes, four GSBIs
are added to the MSM8960 platform.
On the MSM8226-based Samsung Galaxy Grand 2, a simple framebuffer is
defined.
-----BEGIN PGP SIGNATURE-----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=i4fQ
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=8ZP9
-----END PGP SIGNATURE-----
Merge tag 'qcom-arm32-for-6.19' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into soc/dt
Qualcomm Arm32 DeviceTree updates for v6.19
In addition to a variety of cleanups and reordering of nodes, four GSBIs
are added to the MSM8960 platform.
On the MSM8226-based Samsung Galaxy Grand 2, a simple framebuffer is
defined.
* tag 'qcom-arm32-for-6.19' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux:
ARM: dts: qcom: msm8226-samsung-ms013g: add simple-framebuffer
ARM: dts: qcom: msm8960: rename msmgpio node to tlmm
ARM: dts: qcom: msm8960: add I2C nodes for gsbi1 and gsbi8
ARM: dts: qcom: msm8960: add I2C nodes for gsbi10 and gsbi12
ARM: dts: qcom: msm8960: inline qcom-msm8960-pins.dtsi
ARM: dts: qcom: msm8960: reorder nodes and properties
Signed-off-by: Arnd Bergmann <arnd@arndb.de>