commit e41c75ca31 upstream.
Before waiting for the rescan worker to finish and flushing reservations,
we clear the BTRFS_FS_QUOTA_ENABLED flag from fs_info. If we fail flushing
reservations we leave with the flag not set which is not correct since
quotas are still enabled - we must set back the flag on error paths, such
as when we fail to start a transaction, except for error paths that abort
a transaction. The reservation flushing happens very early before we do
any operation that actually disables quotas and before we start a
transaction, so set back BTRFS_FS_QUOTA_ENABLED if it fails.
Fixes: af0e2aab3b ("btrfs: qgroup: flush reservations during quota disable")
CC: stable@vger.kernel.org # 6.12+
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 3061801420 upstream.
There are some reports of "unable to find chunk map for logical 2147483648
length 16384" error message appears in dmesg. This means some IOs are
occurring after a block group is removed.
When a metadata tree node is cleaned on a zoned setup, we keep that node
still dirty and write it out not to create a write hole. However, this can
make a block group's used bytes == 0 while there is a dirty region left.
Such an unused block group is moved into the unused_bg list and processed
for removal. When the removal succeeds, the block group is removed from the
transaction->dirty_bgs list, so the unused dirty nodes in the block group
are not sent at the transaction commit time. It will be written at some
later time e.g, sync or umount, and causes "unable to find chunk map"
errors.
This can happen relatively easy on SMR whose zone size is 256MB. However,
calling do_zone_finish() on such block group returns -EAGAIN and keep that
block group intact, which is why the issue is hidden until now.
Fixes: afba2bc036 ("btrfs: zoned: implement active zone tracking")
CC: stable@vger.kernel.org # 6.1+
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Naohiro Aota <naohiro.aota@wdc.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 2a5898c4aa upstream.
If we failed walking a log tree during replay, we have a missing
transaction abort to prevent committing a transaction where we didn't
fully replay all the changes from a log tree and therefore can leave the
respective subvolume tree in some inconsistent state. So add the missing
transaction abort.
CC: stable@vger.kernel.org # 6.1+
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 55f7c65b2f upstream.
When deciding if a zoned filesystem is reaching the threshold to reclaim
data block groups, look at the size of the filesystem not to potentially
total available size of all drives in the filesystem.
Especially if a filesystem was created with mkfs' -b option, constraining
it to only a portion of the block device, the numbers won't match and
potentially garbage collection is kicking in too late.
Fixes: 3687fcb075 ("btrfs: zoned: make auto-reclaim less aggressive")
CC: stable@vger.kernel.org # 6.1+
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Tested-by: Damien Le Moal <dlemoal@kernel.org>
Signed-off-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 64690a90cd upstream.
On the devices that need their endpoints to get an
initial clear_halt, this needs to be done before
the devices can be opened. That means it needs to be
before the devices are registered.
Fixes: 15bf722e6f ("cdc-acm: Add support of ATOL FPrint fiscal printers")
Cc: stable <stable@kernel.org>
Signed-off-by: Oliver Neukum <oneukum@suse.com>
Link: https://lore.kernel.org/r/20250717141259.2345605-1-oneukum@suse.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 5cc1f66cb2 upstream.
The second instance of TBSVC_MATCH_PROTOCOL_VERSION seems to have been
intended to be TBSVC_MATCH_PROTOCOL_REVISION.
Fixes: d1ff70241a ("thunderbolt: Add support for XDomain discovery protocol")
Cc: stable <stable@kernel.org>
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Link: https://lore.kernel.org/r/20250721050136.30004-1-ebiggers@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 35b6fc51c6 upstream.
syzbot reports a use-after-free in comedi in the below link, which is
due to comedi gladly removing the allocated async area even though poll
requests are still active on the wait_queue_head inside of it. This can
cause a use-after-free when the poll entries are later triggered or
removed, as the memory for the wait_queue_head has been freed. We need
to check there are no tasks queued on any of the subdevices' wait queues
before allowing the device to be detached by the `COMEDI_DEVCONFIG`
ioctl.
Tasks will read-lock `dev->attach_lock` before adding themselves to the
subdevice wait queue, so fix the problem in the `COMEDI_DEVCONFIG` ioctl
handler by write-locking `dev->attach_lock` before checking that all of
the subdevices are safe to be deleted. This includes testing for any
sleepers on the subdevices' wait queues. It remains locked until the
device has been detached. This requires the `comedi_device_detach()`
function to be refactored slightly, moving the bulk of it into new
function `comedi_device_detach_locked()`.
Note that the refactor of `comedi_device_detach()` results in
`comedi_device_cancel_all()` now being called while `dev->attach_lock`
is write-locked, which wasn't the case previously, but that does not
matter.
Thanks to Jens Axboe for diagnosing the problem and co-developing this
patch.
Cc: stable <stable@kernel.org>
Fixes: 2f3fdcd7ce ("staging: comedi: add rw_semaphore to protect against device detachment")
Link: https://lore.kernel.org/all/687bd5fe.a70a0220.693ce.0091.GAE@google.com/
Reported-by: syzbot+01523a0ae5600aef5895@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=01523a0ae5600aef5895
Co-developed-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Tested-by: Jens Axboe <axboe@kernel.dk>
Link: https://lore.kernel.org/r/20250722155316.27432-1-abbotti@mev.co.uk
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 7616f006db upstream.
The current power direction of an USB-C port also influences the
power_supply's online status, so a power role change should also update
the power_supply.
Fixes an issue on some systems where plugging in a normal USB device in
for the first time after a reboot will cause upower to erroneously
consider the system to be connected to AC power.
Cc: stable <stable@kernel.org>
Fixes: 0e6371fbfb ("usb: typec: ucsi: Report power supply changes")
Signed-off-by: Myrrh Periwinkle <myrrhperiwinkle@qtmlabs.xyz>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://lore.kernel.org/r/20250721-fix-ucsi-pwr-dir-notify-v1-1-e53d5340cb38@qtmlabs.xyz
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 966c5cd72b upstream.
When a card is present in the reader, the driver currently defers
autosuspend by returning -EAGAIN during the suspend callback to
trigger USB remote wakeup signaling. However, this does not guarantee
that the mmc child device has been resumed, which may cause issues if
it remains suspended while the card is accessible.
This patch ensures that all child devices, including the mmc host
controller, are explicitly resumed before returning -EAGAIN. This
fixes a corner case introduced by earlier remote wakeup handling,
improving reliability of runtime PM when a card is inserted.
Fixes: 883a87ddf2 ("misc: rtsx_usb: Use USB remote wakeup signaling for card insertion detection")
Cc: stable@vger.kernel.org
Signed-off-by: Ricky Wu <ricky_wu@realtek.com>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Link: https://lore.kernel.org/r/20250711140143.2105224-1-ricky_wu@realtek.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit cf16f40836 upstream.
usb_parse_ss_endpoint_companion() checks descriptor type before length,
enabling a potentially odd read outside of the buffer size.
Fix this up by checking the size first before looking at any of the
fields in the descriptor.
Signed-off-by: Xinyu Liu <katieeliu@tencent.com>
Cc: stable <stable@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 7d345aa1fa upstream.
The grp->bb_largest_free_order is updated regardless of whether
mb_optimize_scan is enabled. This can lead to inconsistencies between
grp->bb_largest_free_order and the actual s_mb_largest_free_orders list
index when mb_optimize_scan is repeatedly enabled and disabled via remount.
For example, if mb_optimize_scan is initially enabled, largest free
order is 3, and the group is in s_mb_largest_free_orders[3]. Then,
mb_optimize_scan is disabled via remount, block allocations occur,
updating largest free order to 2. Finally, mb_optimize_scan is re-enabled
via remount, more block allocations update largest free order to 1.
At this point, the group would be removed from s_mb_largest_free_orders[3]
under the protection of s_mb_largest_free_orders_locks[2]. This lock
mismatch can lead to list corruption.
To fix this, whenever grp->bb_largest_free_order changes, we now always
attempt to remove the group from its old order list. However, we only
insert the group into the new order list if `mb_optimize_scan` is enabled.
This approach helps prevent lock inconsistencies and ensures the data in
the order lists remains reliable.
Fixes: 196e402adf ("ext4: improve cr 0 / cr 1 group scanning")
CC: stable@vger.kernel.org
Suggested-by: Jan Kara <jack@suse.cz>
Signed-off-by: Baokun Li <libaokun1@huawei.com>
Reviewed-by: Zhang Yi <yi.zhang@huawei.com>
Link: https://patch.msgid.link/20250714130327.1830534-12-libaokun1@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 1c320d8e92 upstream.
Groups with no free blocks shouldn't be in any average fragment size list.
However, when all blocks in a group are allocated(i.e., bb_fragments or
bb_free is 0), we currently skip updating the average fragment size, which
means the group isn't removed from its previous s_mb_avg_fragment_size[old]
list.
This created "zombie" groups that were always skipped during traversal as
they couldn't satisfy any block allocation requests, negatively impacting
traversal efficiency.
Therefore, when a group becomes completely full, bb_avg_fragment_size_order
is now set to -1. If the old order was not -1, a removal operation is
performed; if the new order is not -1, an insertion is performed.
Fixes: 196e402adf ("ext4: improve cr 0 / cr 1 group scanning")
CC: stable@vger.kernel.org
Signed-off-by: Baokun Li <libaokun1@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Zhang Yi <yi.zhang@huawei.com>
Link: https://patch.msgid.link/20250714130327.1830534-11-libaokun1@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit b42497e3c0 upstream.
When allocating IOVA the candidate range gets aligned to the target
alignment. If the range is close to ULONG_MAX then the ALIGN() can
wrap resulting in a corrupted iova.
Open code the ALIGN() using get_add_overflow() to prevent this.
This simplifies the checks as we don't need to check for length earlier
either.
Consolidate the two copies of this code under a single helper.
This bug would allow userspace to create a mapping that overlaps with some
other mapping or a reserved range.
Cc: stable@vger.kernel.org
Fixes: 51fe6141f0 ("iommufd: Data structure to provide IOVA to PFN mapping")
Reported-by: syzbot+c2f65e2801743ca64e08@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/r/685af644.a00a0220.2e5631.0094.GAE@google.com
Reviewed-by: Yi Liu <yi.l.liu@intel.com>
Reviewed-by: Nicolin Chen <nicolinc@nvidia.com>
Link: https://patch.msgid.link/all/1-v1-7b4a16fc390b+10f4-iommufd_alloc_overflow_jgg@nvidia.com/
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit b23e09f999 upstream.
There are callers that read the unmapped bytes even when rc != 0. Thus, do
not forget to report it in the error path too.
Fixes: 8d40205f60 ("iommufd: Add kAPI toward external drivers for kernel access")
Link: https://patch.msgid.link/r/e2b61303bbc008ba1a4e2d7c2a2894749b59fdac.1752126748.git.nicolinc@nvidia.com
Cc: stable@vger.kernel.org
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Nicolin Chen <nicolinc@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 12724ce3fe upstream.
The iotlb_sync_map iommu ops allows drivers to perform necessary cache
flushes when new mappings are established. For the Intel iommu driver,
this callback specifically serves two purposes:
- To flush caches when a second-stage page table is attached to a device
whose iommu is operating in caching mode (CAP_REG.CM==1).
- To explicitly flush internal write buffers to ensure updates to memory-
resident remapping structures are visible to hardware (CAP_REG.RWBF==1).
However, in scenarios where neither caching mode nor the RWBF flag is
active, the cache_tag_flush_range_np() helper, which is called in the
iotlb_sync_map path, effectively becomes a no-op.
Despite being a no-op, cache_tag_flush_range_np() involves iterating
through all cache tags of the iommu's attached to the domain, protected
by a spinlock. This unnecessary execution path introduces overhead,
leading to a measurable I/O performance regression. On systems with NVMes
under the same bridge, performance was observed to drop from approximately
~6150 MiB/s down to ~4985 MiB/s.
Introduce a flag in the dmar_domain structure. This flag will only be set
when iotlb_sync_map is required (i.e., when CM or RWBF is set). The
cache_tag_flush_range_np() is called only for domains where this flag is
set. This flag, once set, is immutable, given that there won't be mixed
configurations in real-world scenarios where some IOMMUs in a system
operate in caching mode while others do not. Theoretically, the
immutability of this flag does not impact functionality.
Reported-by: Ioanna Alifieraki <ioanna-maria.alifieraki@canonical.com>
Closes: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/2115738
Link: https://lore.kernel.org/r/20250701171154.52435-1-ioanna-maria.alifieraki@canonical.com
Fixes: 129dab6e12 ("iommu/vt-d: Use cache_tag_flush_range_np() in iotlb_sync_map")
Cc: stable@vger.kernel.org
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Link: https://lore.kernel.org/r/20250703031545.3378602-1-baolu.lu@linux.intel.com
Link: https://lore.kernel.org/r/20250714045028.958850-3-baolu.lu@linux.intel.com
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 9d5eff7821 upstream.
We now do a weighted selection of server interfaces when allocating
new channels. The weights are decided based on the speed advertised.
The fulfilled weight for an interface is a counter that is used to
track the interface selection. It should be reset back to zero once
all interfaces fulfilling their weight.
In cifs_chan_update_iface, this reset logic was missing. As a result
when the server interface list changes, the client may not be able
to find a new candidate for other channels after all interfaces have
been fulfilled.
Fixes: a6d8fb54a5 ("cifs: distribute channels across interfaces based on speed")
Cc: <stable@vger.kernel.org>
Signed-off-by: Shyam Prasad N <sprasad@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 077ec7bcec upstream.
With the conversion done by commit e88f03230d ("clk: qcom: gcc-ipq8074:
rework nss_port5/6 clock to multiple conf") a Copy-Paste error was made
for the nss_port6_tx_clk_src frequency table.
This was caused by the wrong setting of the parent in
ftbl_nss_port6_tx_clk_src that was wrongly set to P_UNIPHY1_RX instead
of P_UNIPHY2_TX.
This cause the UNIPHY2 port to malfunction when it needs to be scaled to
higher clock. The malfunction was observed with the example scenario
with an Aquantia 10G PHY connected and a speed higher than 1G (example
2.5G)
Fix the broken frequency table to restore original functionality.
Cc: stable@vger.kernel.org
Fixes: e88f03230d ("clk: qcom: gcc-ipq8074: rework nss_port5/6 clock to multiple conf")
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Tested-by: Robert Marko <robimarko@gmail.com>
Link: https://lore.kernel.org/r/20250522202600.4028-1-ansuelsmth@gmail.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 2df7168717 upstream.
Any zoned DM target that requires zone append emulation will use the
block layer zone write plugging. In such case, DM target drivers must
not split BIOs using dm_accept_partial_bio() as doing so can potentially
lead to deadlocks with queue freeze operations. Regular write operations
used to emulate zone append operations also cannot be split by the
target driver as that would result in an invalid writen sector value
return using the BIO sector.
In order for zoned DM target drivers to avoid such incorrect BIO
splitting, we must ensure that large BIOs are split before being passed
to the map() function of the target, thus guaranteeing that the
limits for the mapped device are not exceeded.
dm-crypt and dm-flakey are the only target drivers supporting zoned
devices and using dm_accept_partial_bio().
In the case of dm-crypt, this function is used to split BIOs to the
internal max_write_size limit (which will be suppressed in a different
patch). However, since crypt_alloc_buffer() uses a bioset allowing only
up to BIO_MAX_VECS (256) vectors in a BIO. The dm-crypt device
max_segments limit, which is not set and so default to BLK_MAX_SEGMENTS
(128), must thus be respected and write BIOs split accordingly.
In the case of dm-flakey, since zone append emulation is not required,
the block layer zone write plugging is not used and no splitting of BIOs
required.
Modify the function dm_zone_bio_needs_split() to use the block layer
helper function bio_needs_zone_write_plugging() to force a call to
bio_split_to_limits() in dm_split_and_process_bio(). This allows DM
target drivers to avoid using dm_accept_partial_bio() for write
operations on zoned DM devices.
Fixes: f211268ed1 ("dm: Use the block layer zone append emulation")
Cc: stable@vger.kernel.org
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Mikulas Patocka <mpatocka@redhat.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Link: https://lore.kernel.org/r/20250625093327.548866-4-dlemoal@kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit f70291411b upstream.
In preparation for fixing device mapper zone write handling, introduce
the inline helper function bio_needs_zone_write_plugging() to test if a
BIO requires handling through zone write plugging using the function
blk_zone_plug_bio(). This function returns true for any write
(op_is_write(bio) == true) operation directed at a zoned block device
using zone write plugging, that is, a block device with a disk that has
a zone write plug hash table.
This helper allows simplifying the check on entry to blk_zone_plug_bio()
and used in to protect calls to it for blk-mq devices and DM devices.
Fixes: f211268ed1 ("dm: Use the block layer zone append emulation")
Cc: stable@vger.kernel.org
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20250625093327.548866-3-dlemoal@kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 579bd5006f upstream.
When committing new scheme parameters from the sysfs, the target_nid field
of the damos struct would not be copied. This would result in the
target_nid field to retain its original value, despite being updated in
the sysfs interface.
This patch fixes this issue by copying target_nid in damos_commit().
Link: https://lkml.kernel.org/r/20250709004729.17252-1-bijan311@gmail.com
Fixes: 83dc7bbaec ("mm/damon/sysfs: use damon_commit_ctx()")
Signed-off-by: Bijan Tabatabai <bijantabatab@micron.com>
Reviewed-by: SeongJae Park <sj@kernel.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Ravi Shankar Jonnalagadda <ravis.opensrc@micron.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 040bc6d0e0 ]
It should use vm flags instead of pte flags
to specify bo vm attributes.
Fixes: 7946340fa3 ("drm/amdgpu: Move csa related code to separate file")
Signed-off-by: Jack Xiao <Jack.Xiao@amd.com>
Reviewed-by: Likun Gao <Likun.Gao@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit b08425fa77)
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 10ef476aad ]
The vram block allocation flag must be cleared
before making vram reservation, otherwise reserving
addresses within the currently freed memory range
will always fail.
Fixes: c9cad937c0 ("drm/amdgpu: add drm buddy support to amdgpu")
Signed-off-by: YiPeng Chai <YiPeng.Chai@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit d38eaf27de)
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b63335fb3d ]
collect_sample() is used to gather samples of the data in a Write op for
analysis to try and determine if the compression algorithm is likely to
achieve anything more quickly than actually running the compression
algorithm.
However, collect_sample() assumes that the data it is going to be sampling
is stored in an ITER_XARRAY-type iterator (which it now should never be)
and doesn't actually check that it is before accessing the underlying
xarray directly.
Fix this by replacing the code with a loop that just uses the standard
iterator functions to sample every other 2KiB block, skipping the
intervening ones. It's not quite the same as the previous algorithm as it
doesn't necessarily align to the pages within an ordinary write from the
pagecache.
Note that the btrfs code from which this was derived samples the inode's
pagecache directly rather than the iterator - but that doesn't necessarily
work for network filesystems if O_DIRECT is in operation.
Fixes: 94ae8c3fee ("smb: client: compress: LZ77 code improvements cleanup")
Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: Paulo Alcantara (Red Hat) <pc@manguebit.org>
cc: Enzo Matsumiya <ematsumiya@suse.de>
cc: Shyam Prasad N <sprasad@microsoft.com>
cc: Tom Talpey <tom@talpey.com>
cc: linux-cifs@vger.kernel.org
cc: linux-fsdevel@vger.kernel.org
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0e270f3297 ]
Use the regmap_write() for software reset in fsl_sai_config_disable would
cause the FSL_SAI_CSR_BCE bit to be cleared. Refer to
commit 197c53c8ec ("ASoC: fsl_sai: Don't disable bitclock for i.MX8MP")
FSL_SAI_CSR_BCE should not be cleared. So need to use regmap_update_bits()
instead of regmap_write() for these bit operations.
Fixes: dc78f7e591 ("ASoC: fsl_sai: Force a software reset when starting in consumer mode")
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Link: https://patch.msgid.link/20250807020318.2143219-1-shengjiu.wang@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4845865465 ]
In using CONFIG_RTC_HCTOSYS, rtc_hctosys() will sync the RTC time to the
kernel time as long as rtc_read_time() succeeds. In some power loss
situations, our supercapacitor-backed DS1342 RTC comes up with either an
unpredictable future time or the default 01/01/00 from the datasheet.
The oscillator stop flag (OSF) is set in these scenarios due to the
power loss and can be used to determine the validity of the RTC data.
Some chip types in the ds1307 driver already have OSF handling to
determine whether .read_time provides valid RTC data or returns -EINVAL.
This change removes the clear of the OSF in .probe as the OSF needs to
be preserved to expand the OSF handling to the ds1341 chip type (note
that DS1341 and DS1342 share a datasheet).
Signed-off-by: Meagan Lloyd <meaganlloyd@linux.microsoft.com>
Reviewed-by: Tyler Hicks <code@tyhicks.com>
Acked-by: Rodolfo Giometti <giometti@enneenne.com>
Link: https://lore.kernel.org/r/1749665656-30108-2-git-send-email-meaganlloyd@linux.microsoft.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9768797c21 ]
The error occurs on the third attempt to encode extents. When function
ext_tree_prepare_commit() reallocates a larger buffer to retry encoding
extents, the "layoutupdate_pages" page array is initialized only after the
retry loop. But ext_tree_free_commitdata() is called on every iteration
and tries to put pages in the array, thus dereferencing uninitialized
pointers.
An additional problem is that there is no limit on the maximum possible
buffer_size. When there are too many extents, the client may create a
layoutcommit that is larger than the maximum possible RPC size accepted
by the server.
During testing, we observed two typical scenarios. First, one memory page
for extents is enough when we work with small files, append data to the
end of the file, or preallocate extents before writing. But when we fill
a new large file without preallocating, the number of extents can be huge,
and counting the number of written extents in ext_tree_encode_commit()
does not help much. Since this number increases even more between
unlocking and locking of ext_tree, the reallocated buffer may not be
large enough again and again.
Co-developed-by: Konstantin Evtushenko <koevtushenko@yandex.com>
Signed-off-by: Konstantin Evtushenko <koevtushenko@yandex.com>
Signed-off-by: Sergey Bashirov <sergeybashirov@gmail.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20250630183537.196479-2-sergeybashirov@gmail.com
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d897d81671 ]
When there are too many block extents for a layoutcommit, they may not
all fit into the maximum-sized RPC. This patch allows the generic pnfs
code to properly handle -ENOSPC returned by the block/scsi layout driver
and trigger additional layoutcommits if necessary.
Co-developed-by: Konstantin Evtushenko <koevtushenko@yandex.com>
Signed-off-by: Konstantin Evtushenko <koevtushenko@yandex.com>
Signed-off-by: Sergey Bashirov <sergeybashirov@gmail.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20250630183537.196479-5-sergeybashirov@gmail.com
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7db6e66663 ]
At the end of the isect translation, disc_addr represents the physical
disk offset. Thus, end calculated from disk_addr is also a physical disk
offset. Therefore, range checking should be done using map->disk_offset,
not map->start.
Signed-off-by: Sergey Bashirov <sergeybashirov@gmail.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20250702133226.212537-1-sergeybashirov@gmail.com
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 448dfecc7f ]
In blk_stack_limits(), we check that the t->chunk_sectors value is a
multiple of the t->physical_block_size value.
However, by finding the chunk_sectors value in bytes, we may overflow
the unsigned int which holds chunk_sectors, so change the check to be
based on sectors.
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: John Garry <john.g.garry@oracle.com>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Link: https://lore.kernel.org/r/20250729091448.1691334-2-john.g.garry@oracle.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 57ec5a8735 ]
According to the LAN8710A datasheet (Rev. B, section 3.8.5.1), a hardware
reset is required after power-on, and the reference clock (REF_CLK) must be
established before asserting reset.
Signed-off-by: Buday Csaba <buday.csaba@prolan.hu>
Cc: Csókás Bence <csokas.bence@prolan.hu>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20250728152916.46249-2-csokas.bence@prolan.hu
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 42e6c6ce03 ]
Currently elevators will record internal 'async_depth' to throttle
asynchronous requests, and they both calculate shallow_dpeth based on
sb->shift, with the respect that sb->shift is the available tags in one
word.
However, sb->shift is not the availbale tags in the last word, see
__map_depth:
if (index == sb->map_nr - 1)
return sb->depth - (index << sb->shift);
For consequence, if the last word is used, more tags can be get than
expected, for example, assume nr_requests=256 and there are four words,
in the worst case if user set nr_requests=32, then the first word is
the last word, and still use bits per word, which is 64, to calculate
async_depth is wrong.
One the ohter hand, due to cgroup qos, bfq can allow only one request
to be allocated, and set shallow_dpeth=1 will still allow the number
of words request to be allocated.
Fix this problems by using shallow_depth to the whole sbitmap instead
of per word, also change kyber, mq-deadline and bfq to follow this,
a new helper __map_depth_with_shallow() is introduced to calculate
available bits in each word.
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Link: https://lore.kernel.org/r/20250807032413.1469456-2-yukuai1@huaweicloud.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 550a194c59 ]
It is already called long before we may hit this cleanup code path.
Cc: Steve French <smfrench@gmail.com>
Cc: Tom Talpey <tom@talpey.com>
Cc: Long Li <longli@microsoft.com>
Cc: linux-cifs@vger.kernel.org
Cc: samba-technical@lists.samba.org
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d34fe509f5 ]
Kernels configured with CONFIG_MULTIUSER=n have no cap_get_proc().
Check for ENOSYS to recognize this case, and continue on to
attempt to access the requested MSRs (such as temperature).
Signed-off-by: Calvin Owens <calvin@wbinvd.org>
Signed-off-by: Len Brown <len.brown@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6ea0ec1b95 ]
turbostat.c: In function 'parse_int_file':
turbostat.c:5567:19: error: 'PATH_MAX' undeclared (first use in this function)
5567 | char path[PATH_MAX];
| ^~~~~~~~
turbostat.c: In function 'probe_graphics':
turbostat.c:6787:19: error: 'PATH_MAX' undeclared (first use in this function)
6787 | char path[PATH_MAX];
| ^~~~~~~~
Signed-off-by: Calvin Owens <calvin@wbinvd.org>
Reviewed-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e60a13bcef ]
/sys/devices/system/cpu/intel_uncore_frequency/package_X_die_Y/
may be readable by all, but
/sys/devices/system/cpu/intel_uncore_frequency/package_X_die_Y/current_freq_khz
may be readable only by root.
Non-root turbostat users see complaints in this scenario.
Fail probe of the interface if we can't read current_freq_khz.
Reported-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Original-patch-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8ffcb7560b ]
The source and destination of some strcpy operations was the same.
Split out the part of the operations that needed to be done for those
particular calls so the unnecessary copy wasn't done.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202506140756.EFXXvIP4-lkp@intel.com/
Signed-off-by: Corey Minyard <corey@minyard.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 694174f94e ]
In case a menu has comment without letters/numbers (eg. characters
matching the regexp '^[^[:alpha:][:digit:]]+$', for example - or *),
hitting space will cycle through those comments, rather than
selecting/deselecting the currently-highlighted option.
This is the behaviour of hitting any letter/digit: jump to the next
option which prompt starts with that letter. The only letters that
do not behave as such are 'y' 'm' and 'n'. Prompts that start with
one of those three letters are instead matched on the first letter
that is not 'y', 'm' or 'n'.
Fix that by treating 'space' as we treat y/m/n, ie. as an action key,
not as shortcut to jump to prompt.
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Cherniaev Andrei <dungeonlords789@naver.com>
[masahiro: took from Buildroot, adjusted the commit subject]
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit cae9cdbcd9 ]
The on_treeview2_cursor_changed() handler is connected to both the left
and right tree views, but it hardcodes model2 (the GtkTreeModel of the
right tree view). This is incorrect. Get the associated model from the
view.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ec50ec378e ]
During BMC firmware upgrades on live systems, the ipmi_msghandler
generates excessive "BMC returned incorrect response" warnings
while the BMC is temporarily offline. This can flood system logs
in large deployments.
Replace dev_warn() with dev_warn_ratelimited() to throttle these
warnings and prevent log spam during BMC maintenance operations.
Signed-off-by: Breno Leitao <leitao@debian.org>
Message-ID: <20250710-ipmi_ratelimit-v1-1-6d417015ebe9@debian.org>
Signed-off-by: Corey Minyard <corey@minyard.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b306019848 ]
MLX cap pg_track_log_max_msg_size consists of 5 bits, value of which is
used as power of 2 for max_msg_size. This can lead to multiplication
overflow between max_msg_size (u32) and integer constant, and afterwards
incorrect value is being written to rq_size.
Fix this issue by extending integer constant to u64 type.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Suggested-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Artem Sadovnikov <a.sadovnikov@ispras.ru>
Reviewed-by: Yishai Hadas <yishaih@nvidia.com>
Link: https://lore.kernel.org/r/20250701144017.2410-2-a.sadovnikov@ispras.ru
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit dafeaf2c03 ]
When PCI_IRQ_AFFINITY is set for calling pci_alloc_irq_vectors(), it
means interrupts are spread around the available CPUs. It also means that
the interrupts become managed, which means that an interrupt is shutdown
when all the CPUs in the interrupt affinity mask go offline.
Using managed interrupts in this way means that we should ensure that
completions should not occur on HW queues where the associated interrupt
is shutdown. This is typically achieved by ensuring only CPUs which are
online can generate IO completion traffic to the HW queue which they are
mapped to (so that they can also serve completion interrupts for that HW
queue).
The problem in the driver is that a CPU can generate completions to a HW
queue whose interrupt may be shutdown, as the CPUs in the HW queue
interrupt affinity mask may be offline. This can cause IOs to never
complete and hang the system. The driver maintains its own CPU <-> HW
queue mapping for submissions, see aac_fib_vector_assign(), but this does
not reflect the CPU <-> HW queue interrupt affinity mapping.
Commit 9dc704dcc0 ("scsi: aacraid: Reply queue mapping to CPUs based on
IRQ affinity") tried to remedy this issue may mapping CPUs properly to HW
queue interrupts. However this was later reverted in commit c5becf57dd
("Revert "scsi: aacraid: Reply queue mapping to CPUs based on IRQ
affinity") - it seems that there were other reports of hangs. I guess
that this was due to some implementation issue in the original commit or
maybe a HW issue.
Fix the very original hang by just not using managed interrupts by not
setting PCI_IRQ_AFFINITY. In this way, all CPUs will be in each HW queue
affinity mask, so should not create completion problems if any CPUs go
offline.
Signed-off-by: John Garry <john.g.garry@oracle.com>
Link: https://lore.kernel.org/r/20250715111535.499853-1-john.g.garry@oracle.com
Closes: https://lore.kernel.org/linux-scsi/20250618192427.3845724-1-jmeneghi@redhat.com/
Reviewed-by: John Meneghini <jmeneghi@redhat.com>
Tested-by: John Meneghini <jmeneghi@redhat.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6e0f6aa44b ]
Fix target_parse_pr_out_transport_id() to return a string representing
the transport ID in a human-readable format (e.g., naa.xxxxxxxx...) for
various SCSI protocol types (SAS, FCP, SRP, SBP).
Previously, the function returned a pointer to the raw binary buffer,
which was incorrectly compared against human-readable strings, causing
comparisons to fail. Now, the function writes a properly formatted
string into a buffer provided by the caller. The output format depends
on the transport protocol:
* SAS: 64-bit identifier, "naa." prefix.
* FCP: 64-bit identifier, colon separated values.
* SBP: 64-bit identifier, no prefix.
* SRP: 128-bit identifier, "0x" prefix.
* iSCSI: IQN string.
Signed-off-by: Maurizio Lombardi <mlombard@redhat.com>
Link: https://lore.kernel.org/r/20250714133738.11054-1-mlombard@redhat.com
Reviewed-by: Dmitry Bogdanov <d.bogdanov@yadro.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 37c4e72b06 ]
sas_user_scan() did not fully process wildcard channel scans
(SCAN_WILD_CARD) when a transport-specific user_scan() callback was
present. Only channel 0 would be scanned via user_scan(), while the
remaining channels were skipped, potentially missing devices.
user_scan() invokes updated sas_user_scan() for channel 0, and if
successful, iteratively scans remaining channels (1 to
shost->max_channel) via scsi_scan_host_selected(). This ensures complete
wildcard scanning without affecting transport-specific scanning behavior.
Signed-off-by: Ranjan Kumar <ranjan.kumar@broadcom.com>
Link: https://lore.kernel.org/r/20250624061649.17990-1-ranjan.kumar@broadcom.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
