This adds some of the missing GATE clocks of CMU_TOPC block.
Signed-off-by: Alim Akhtar <alim.akhtar@samsung.com>
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Corrects the CMU_TOPC block clock names as per user manual.
This does not change any functionalities.
Signed-off-by: Alim Akhtar <alim.akhtar@samsung.com>
Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
nr_clk_ids for FSYS1 block is wrongly set as TOP1 block,
this patch corrects it.
Signed-off-by: Padmavathi Venna <padma.v@samsung.com>
Signed-off-by: Alim Akhtar <alim.akhtar@samsung.com>
Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
This patch corrects the nr_clk_ids for fsys0 block
which is wrongly set to number of clocks of the TOP1 CMU.
This also adjusts the gate clocks order.
Signed-off-by: Padmavathi Venna <padma.v@samsung.com>
Signed-off-by: Alim Akhtar <alim.akhtar@samsung.com>
Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
As per UM, sclk_mmc2 is bit 16 of SEL_TOP1_FSYS0. Also the DIV
and the GATE clocks are at bit 16 in their respective registers.
For mmc1 and mmc0 clock MUXs are in TOP1_FSYS11 instead of TOP1_FSYS1.
And their DIV and GATE clks are in xxx_TOP1_FSYS11 instead of TOP1_FSYS1.
This patch corrects it.
This also adds xxx_FSYS11 to be saved/restore during s2r cycles.
Signed-off-by: Alim Akhtar <alim.akhtar@samsung.com>
Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Corrects the bit width of DIV_TOPC3 register.
These are wrongly set to 3 which should be 4 bit wide as per UM.
This also adjusts the MUX clock order.
Signed-off-by: Alim Akhtar <alim.akhtar@samsung.com>
Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Document the binding for the zynq specific chipidea UDC binding.
Signed-off-by: Nathan Sullivan <nathan.sullivan@ni.com>
Signed-off-by: Peter Chen <peter.chen@freescale.com>
Due to having hardware tx buffers less than 512 bytes in size, streaming
must be enabled on the Zynq for the udc to work at all. Add platform data
specific to the Zynq udc, which does not set the CI_HDRC_DISABLE_STREAMING
flag.
Based on a patch by the same name from the Xilinx vendor tree.
Signed-off-by: Nathan Sullivan <nathan.sullivan@ni.com>
Signed-off-by: Peter Chen <peter.chen@freescale.com>
According to spec, there are functional and protocol stalls.
For functional stall, it is for bulk and interrupt endpoints,
below are cases for it:
- Host sends SET_FEATURE request for Set-Halt, the udc driver
needs to set stall, and return true unconditionally.
- The gadget driver may call usb_ep_set_halt to stall certain
endpoints, if there is a transfer in pending, the udc driver
should not set stall, and return -EAGAIN accordingly.
These two kinds of stall need to be cleared by host using CLEAR_FEATURE
request (Clear-Halt).
For protocol stall, it is for control endpoint, this stall will
be set if the control request has failed. This stall will be
cleared by next setup request (hardware will do it).
It fixed usbtest (drivers/usb/misc/usbtest.c) Test 13 "set/clear halt"
test failure, meanwhile, this change has been verified by
USB2 CV Compliance Test and MSC Tests.
Cc: <stable@vger.kernel.org> #3.10+
Cc: Alan Stern <stern@rowland.harvard.edu>
Cc: Felipe Balbi <balbi@ti.com>
Signed-off-by: Peter Chen <peter.chen@freescale.com>
In the event that TTM doesn't find a compatible memory type for the
driver's first placement choice (placement without eviction), TTM
returns -EINVAL without trying the driver's second choice.
This causes problems on vmwgfx when VRAM is disabled before first modeset
and during VT switches when fbdev is not enabled.
Fix this by also trying the driver's second choice before returning
-EINVAL.
v2: Also check that man->use_type is true for the driver's second choice.
Fixes a bug where disallowed memory types could be used.
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Brian Paul <brianp@vmware.com>
Reviewed-by: Sinclair Yeh <syeh@vmware.com>
User visible:
- Add 'socket' sort entry, to sort by the processor socket in
'perf top' and 'perf report' (Kan Liang)
- Introduce --socket-filter to 'perf report', for filtering by processor
socket (Kan Liang)
- Add new "Zoom into Processor Socket" operation in the perf hists browser,
used in 'perf top' and 'perf report' (Kan Liang)
- Fix the 'CPU' hist browser column width calculation (Arnaldo Carvalho de Melo)
Infrastructure:
- 'perf test' fixes for the object code reading entry (Jan Stancek)
- Add processor socket and cpu topology 'perf test' entries (Kan Liang)
- Introduce more sysfs__read_TYPE() helpers (Arnaldo Carvalho de Melo)
- Group cpu information reading functions in tools/lib/api/cpu.[ch],
starting with cpu__get_max_freq() from a patchkit by Kan Liang
(Arnaldo Carvalho de Melo)
- Retrieve the MSR PMU type from a perf.data file header and store it
in struct perf_env (Kan Liang)
- Add tools/include into CTAGS file list (Jiri Olsa)
- Add iterator function for perf tests (Matt Fleming)
- Switch to tracing_patch interface (Jiri Olsa)
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=bDjb
-----END PGP SIGNATURE-----
Merge tag 'perf-core-for-mingo-2' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/core
Pull perf/core improvements and fixes from Arnaldo Carvalho de Melo:
User visible changes:
- Add 'socket' sort entry, to sort by the processor socket in
'perf top' and 'perf report'. (Kan Liang)
- Introduce --socket-filter to 'perf report', for filtering by processor
socket. (Kan Liang)
- Add new "Zoom into Processor Socket" operation in the perf hists browser,
used in 'perf top' and 'perf report'. (Kan Liang)
- Fix the 'CPU' hist browser column width calculation. (Arnaldo Carvalho de Melo)
Infrastructure changes:
- 'perf test' fixes for the object code reading entry. (Jan Stancek)
- Add processor socket and cpu topology 'perf test' entries. (Kan Liang)
- Introduce more sysfs__read_TYPE() helpers. (Arnaldo Carvalho de Melo)
- Group cpu information reading functions in tools/lib/api/cpu.[ch],
starting with cpu__get_max_freq() from a patchkit by Kan Liang.
(Arnaldo Carvalho de Melo)
- Retrieve the MSR PMU type from a perf.data file header and store it
in struct perf_env. (Kan Liang)
- Add tools/include into CTAGS file list. (Jiri Olsa)
- Add iterator function for perf tests. (Matt Fleming)
- Switch to tracing_patch interface. (Jiri Olsa)
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
We always want to support all FPU opcodes, including
undocumented ones. That define was fully justified ~20 years ago
but not today. Let's not complicate the code with it.
Signed-off-by: Denys Vlasenko <dvlasenk@redhat.com>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Borislav Petkov <bp@alien8.de>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1440699330-1305-1-git-send-email-dvlasenk@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Fix a few small mistakes in the static key documentation and
delete an unneeded sentence.
Suggested-by: Jason Baron <jbaron@akamai.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/20150914171105.511e1e21@lwn.net
Signed-off-by: Ingo Molnar <mingo@kernel.org>
In btrfs_evict_inode, we properly truncate the page cache for evicted
inodes but then we call btrfs_wait_ordered_range for every inode as well.
It's the right thing to do for regular files but results in incorrect
behavior for device inodes for block devices.
filemap_fdatawrite_range gets called with inode->i_mapping which gets
resolved to the block device inode before getting passed to
wbc_attach_fdatawrite_inode and ultimately to inode_to_bdi. What happens
next depends on whether there's an open file handle associated with the
inode. If there is, we write to the block device, which is unexpected
behavior. If there isn't, we through normally and inode->i_data is used.
We can also end up racing against open/close which can result in crashes
when i_mapping points to a block device inode that has been closed.
Since there can't be any page cache associated with special file inodes,
it's safe to skip the btrfs_wait_ordered_range call entirely and avoid
the problem.
Cc: <stable@vger.kernel.org>
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=100911
Tested-by: Christoph Biedl <linux-kernel.bfrz@manchmal.in-ulm.de>
Signed-off-by: Jeff Mahoney <jeffm@suse.com>
Reviewed-by: Filipe Manana <fdmanana@suse.com>
This commit removes all CONFIG_.*{,_MODULE} in ACPI code, replacing it
with IS_ENABLED().
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
This patch changes the type of the return value of the acpi_sleep_proc_init()
method to be void, as this method never fails and its return value is never
used.
Signed-off-by: Rami Rosen <ramirose@gmail.com>\
[ rjw : Fixed up the static inline stub ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
This patch changes the type of the return value of the init_acpi_device_notify()
method to be void, as this method never fails and its return value is never
used.
Signed-off-by: Rami Rosen <ramirose@gmail.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Empirically, acpi_add_id is mostly called with string literals, so
using kstrdup_const for initializing struct acpi_hardware_id::id saves
a little run-time memory and a string copy.
Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
This is preparation for using kstrdup_const to initialize that member.
Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
One wouldn't expect a "match" function modify the string it searches
for, and indeed the only instance of the struct
acpi_scan_handler::match callback, acpi_pnp_match, can easily be
changed. While there, update its helper matching_id().
This is also preparation for constifying struct acpi_hardware_id::id.
Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
This patch adds the missing CONFIG_ prefix to INTEL_SOC_DTS_THERMAL
macros.
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Move cpu device specific code out of generic opp library, and add it to
cpu.c.
Along with that, create a core-internal opp.h header, which will be used
to share structures and function prototypes within opp core.
Reviewed-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
OPP code is expanding and is already present in multiple directories
(cpufreq and power). Lets move it to its own directory, to manage it
better.
This also moves/renames the cpufreq_opp file to cpu.c, as it will
contain helpers for cpu device. Its not just about cpufreq, other
frameworks can use OPPs as well.
Reviewed-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
That's the naming convention followed in most of opp core, but few
routines didn't follow this, fix them.
Reviewed-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Acked-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
free-table routines are opposite of init-table ones, and must be named
to make that clear. Opposite of 'init' is 'exit', but those doesn't suit
really well.
Replace 'init' with 'add' and 'free' with 'remove'.
Reported-by: Pavel Machek <pavel@ucw.cz>
Reviewed-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Acked-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
We already have a better API to get the opp descriptor block's node from
cpu-node. Lets reuse that instead of creating our own routines for the
same stuff. That cleans the code a lot.
This also kills a check we had earlier (as we are using the generic API
now). Earlier we used to check if the operating-points-v2 property
contained multiple phandles instead of a single phandle.
Killing this check isn't an issue because, we only parse the first entry
with of_parse_phandle(). So, if a user passes multiple phandles, its
really his problem :)
Reviewed-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
If a file has a range pointing to a compressed extent, followed by
another range that points to the same compressed extent and a read
operation attempts to read both ranges (either completely or part of
them), the pages that correspond to the second range are incorrectly
filled with zeroes.
Consider the following example:
File layout
[0 - 8K] [8K - 24K]
| |
| |
points to extent X, points to extent X,
offset 4K, length of 8K offset 0, length 16K
[extent X, compressed length = 4K uncompressed length = 16K]
If a readpages() call spans the 2 ranges, a single bio to read the extent
is submitted - extent_io.c:submit_extent_page() would only create a new
bio to cover the second range pointing to the extent if the extent it
points to had a different logical address than the extent associated with
the first range. This has a consequence of the compressed read end io
handler (compression.c:end_compressed_bio_read()) finish once the extent
is decompressed into the pages covering the first range, leaving the
remaining pages (belonging to the second range) filled with zeroes (done
by compression.c:btrfs_clear_biovec_end()).
So fix this by submitting the current bio whenever we find a range
pointing to a compressed extent that was preceded by a range with a
different extent map. This is the simplest solution for this corner
case. Making the end io callback populate both ranges (or more, if we
have multiple pointing to the same extent) is a much more complex
solution since each bio is tightly coupled with a single extent map and
the extent maps associated to the ranges pointing to the shared extent
can have different offsets and lengths.
The following test case for fstests triggers the issue:
seq=`basename $0`
seqres=$RESULT_DIR/$seq
echo "QA output created by $seq"
tmp=/tmp/$$
status=1 # failure is the default!
trap "_cleanup; exit \$status" 0 1 2 3 15
_cleanup()
{
rm -f $tmp.*
}
# get standard environment, filters and checks
. ./common/rc
. ./common/filter
# real QA test starts here
_need_to_be_root
_supported_fs btrfs
_supported_os Linux
_require_scratch
_require_cloner
rm -f $seqres.full
test_clone_and_read_compressed_extent()
{
local mount_opts=$1
_scratch_mkfs >>$seqres.full 2>&1
_scratch_mount $mount_opts
# Create a test file with a single extent that is compressed (the
# data we write into it is highly compressible no matter which
# compression algorithm is used, zlib or lzo).
$XFS_IO_PROG -f -c "pwrite -S 0xaa 0K 4K" \
-c "pwrite -S 0xbb 4K 8K" \
-c "pwrite -S 0xcc 12K 4K" \
$SCRATCH_MNT/foo | _filter_xfs_io
# Now clone our extent into an adjacent offset.
$CLONER_PROG -s $((4 * 1024)) -d $((16 * 1024)) -l $((8 * 1024)) \
$SCRATCH_MNT/foo $SCRATCH_MNT/foo
# Same as before but for this file we clone the extent into a lower
# file offset.
$XFS_IO_PROG -f -c "pwrite -S 0xaa 8K 4K" \
-c "pwrite -S 0xbb 12K 8K" \
-c "pwrite -S 0xcc 20K 4K" \
$SCRATCH_MNT/bar | _filter_xfs_io
$CLONER_PROG -s $((12 * 1024)) -d 0 -l $((8 * 1024)) \
$SCRATCH_MNT/bar $SCRATCH_MNT/bar
echo "File digests before unmounting filesystem:"
md5sum $SCRATCH_MNT/foo | _filter_scratch
md5sum $SCRATCH_MNT/bar | _filter_scratch
# Evicting the inode or clearing the page cache before reading
# again the file would also trigger the bug - reads were returning
# all bytes in the range corresponding to the second reference to
# the extent with a value of 0, but the correct data was persisted
# (it was a bug exclusively in the read path). The issue happened
# only if the same readpages() call targeted pages belonging to the
# first and second ranges that point to the same compressed extent.
_scratch_remount
echo "File digests after mounting filesystem again:"
# Must match the same digests we got before.
md5sum $SCRATCH_MNT/foo | _filter_scratch
md5sum $SCRATCH_MNT/bar | _filter_scratch
}
echo -e "\nTesting with zlib compression..."
test_clone_and_read_compressed_extent "-o compress=zlib"
_scratch_unmount
echo -e "\nTesting with lzo compression..."
test_clone_and_read_compressed_extent "-o compress=lzo"
status=0
exit
Cc: stable@vger.kernel.org
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: Qu Wenruo<quwenruo@cn.fujitsu.com>
Reviewed-by: Liu Bo <bo.li.liu@oracle.com>
handful of patches to add more critical clocks on rockchip SoCs that
are affected by newly introduced gpio clock handling.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.11 (GNU/Linux)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=Y9Y4
-----END PGP SIGNATURE-----
Merge tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux
Pull clk fixes from Stephen Boyd:
"A couple build fixes for drivers introduced in the merge window and a
handful of patches to add more critical clocks on rockchip SoCs that
are affected by newly introduced gpio clock handling"
* tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux:
clk: rockchip: Add pclk_peri to critical clocks on RK3066/RK3188
clk: rockchip: add pclk_cpu to the list of rk3188 critical clocks
clk: rockchip: handle critical clocks after registering all clocks
clk: Hi6220: separately build stub clock driver
clk: h8s2678: Fix compile error
Make device_get_next_child_node() work with ACPI data-only subnodes
introduced previously.
Namely, replace acpi_get_next_child() with acpi_get_next_subnode()
that can handle (and return) child device objects as well as child
data-only subnodes of the given device and modify the ACPI part
of the GPIO subsystem to handle data-only subnodes returned by it.
To that end, introduce acpi_node_get_gpiod() taking a struct
fwnode_handle pointer as the first argument. That argument may
point to an ACPI device object as well as to a data-only subnode
and the function should do the right thing (ie. look for the matching
GPIO descriptor correctly) in either case.
Next, modify fwnode_get_named_gpiod() to use acpi_node_get_gpiod()
instead of acpi_get_gpiod_by_index() which automatically causes
devm_get_gpiod_from_child() to work with ACPI data-only subnodes
that may be returned by device_get_next_child_node() which in turn
is required by the users of that function (the gpio_keys_polled
and gpio-leds drivers).
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Tested-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Split acpi_get_gpiod_by_index() into three smaller routines to
allow the subsequent change of the generic firmware node properties
code to be more strarightforward.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Tested-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Modify is_acpi_node() to return "true" for ACPI data-only subnodes as
well as for ACPI device objects and change the name of to_acpi_node()
to to_acpi_device_node() so it is clear that it covers ACPI device
objects only. Accordingly, introduce to_acpi_data_node() to cover
data-only subnodes in an analogous way.
With that, make the fwnode_property_* family of functions work with
ACPI data-only subnodes introduced previously.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Tested-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Add infrastructure needed to expose data-only subnodes of ACPI
device objects introduced previously via sysfs.
Each data-only subnode is represented as a sysfs directory under
the directory corresponding to its parent object (a device or a
data-only subnode). Each of them has a "path" attribute (containing
the full ACPI namespace path to the object the subnode data come from)
at this time.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Tested-by: Mika Westerberg <mika.westerberg@linux.intel.com>
In some cases, the information expressed via device properties is
hierarchical by nature. For example, the properties of a composite
device consisting of multiple semi-dependent components may need
to be represented in the form of a tree of property data sets
corresponding to specific components of the device.
Unfortunately, using ACPI device objects for this purpose turns out
to be problematic, mostly due to the assumption made by some operating
systems (that platform firmware generally needs to work with) that
each device object in the ACPI namespace represents a device requiring
a separate driver. That assumption leads to complications which
reportedly are impractically difficult to overcome and a different
approach is needed for the sake of interoperability.
The approach implemented here is based on extending _DSD via pointers
(links) to additional ACPI objects returning data packages formatted
in accordance with the _DSD formatting rules defined by Section 6.2.5
of ACPI 6. Those additional objects are referred to as data-only
subnodes of the device object containing the _DSD pointing to them.
The links to them need to be located in a separate section of the
_DSD data package following UUID dbb8e3e6-5886-4ba6-8795-1319f52a966b
referred to as the Hierarchical Data Extension UUID as defined in [1].
Each of them is represented by a package of two strings. The first
string in that package (the key) is regarded as the name of the
data-only subnode pointed to by the link. The second string in it
(the target) is expected to hold the ACPI namespace path (possibly
utilizing the usual ACPI namespace search rules) of an ACPI object
evaluating to a data package extending the _DSD.
The device properties initialization code follows those links,
creates a struct acpi_data_node object for each of them to store
the data returned by the ACPI object pointed to by it and processes
those data recursively (which may lead to the creation of more
struct acpi_data_node objects if the returned data package contains
the Hierarchical Data Extension UUID section with more links in it).
All of the struct acpi_data_node objects are present until the the
ACPI device object containing the _DSD with links to them is deleted
and they are deleted along with that object.
[1]: http://www.uefi.org/sites/default/files/resources/_DSD-hierarchical-data-extension-UUID-v1.pdf
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Tested-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Move the extraction of _DSD properties from acpi_init_properties()
to a separate routine called acpi_extract_properties() to make the
subsequent changes more straightforward.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Tested-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Pull devfreq updates for v4.3 from MyungJoo Ham.
* 'for-rafael' of https://git.kernel.org/pub/scm/linux/kernel/git/mzx/devfreq:
PM / devfreq: Fix incorrect type issue.
PM / devfreq: tegra: Update governor to use devfreq_update_stats()
PM / devfreq: comments for get_dev_status usage updated
PM / devfreq: drop comment about thermal setting max_freq
PM / devfreq: cache the last call to get_dev_status()
PM / devfreq: Drop unlikely before IS_ERR(_OR_NULL)
PM / devfreq: exynos-ppmu: bit-wise operation bugfix.
PM / devfreq: exynos-ppmu: Update documentation to support PPMUv2
PM / devfreq: exynos-ppmu: Add the support of PPMUv2 for Exynos5433
PM / devfreq: event: Remove incorrect property in exynos-ppmu DT binding
Conflicts:
drivers/devfreq/event/exynos-ppmu.c
Add the Broadcom Northstar Plus SoC to the multi_v7_defconfig
Signed-off-by: Jon Mason <jonmason@broadcom.com>
Acked-by: Scott Branden <sbranden@broadcom.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Modify the iProc MAINTAINER to cover the Nortstar Plus SoCs, and add me
to the list of people responsible for it. Since iProc is a family of
SoCs that includes more than just Cygnus (i.e., Northstar (BCM5301X),
Northstar Plus, Northstar 2, and a number of other platforms), remove it
from the title to avoid any future confusion.
Signed-off-by: Jon Mason <jonmason@broadcom.com>
Acked-by: Scott Branden <sbranden@broadcom.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
The NAND flash chip description were not imported for the Asus RT-AC87U
dts file when this was done for all the other dts files, because these
patches were send in parallel.
This adds a missing NAND flash chip description to this patch:
commit 9faa5960ee
Author: Hauke Mehrtens <hauke@hauke-m.de>
Date: Fri May 29 23:39:47 2015 +0200
ARM: BCM5301X: add NAND flash chip description
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Add a very minimalistic set of Northstar Plus Device Tree files which
describes the SoC and the BCM958625 implementation. The perpherials
described are:
ARM Cortex A9 CPU
2 8250 UARTs
ARM GIC
PL310 L2 Cache
ARM A9 Global timer
Signed-off-by: Kapil Hali <kapilh@broadcom.com>
Signed-off-by: Jon Mason <jonmason@broadcom.com>
Reviewed-by: Ray Jui <rjui@broadcom.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Add the documentation for the Broadcom Northstar Plus device tree
bindings.
Signed-off-by: Jon Mason <jonmason@broadcom.com>
Acked-by: Scott Branden <sbranden@broadcom.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
With the previous patch, the installation method change from install
to rsync. There is no need to create subdir during test, the
default EMIT_TESTS is enough.
This patch essentially revert commit 84cbd9e4 ("selftests/exec: do not
install subdir as it is already created").
Suggested-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Bamvor Jian Zhang <bamvor.zhangjian@linaro.org>
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
Broadcom Northstar Plus family of SoCs are used for switching
control and management applications as well as residential
router/gateway applications. The SoC features dual core Cortex
A9 ARM CPUs, integrating several peripheral interfaces including
multiple Gigabit Ethernet PHYs, DDR3 memory, PCIE Gen-2, USB 2.0
and USB 3.0, serial and NAND flash, SATA and several other IO
controllers.
Signed-off-by: Kapil Hali <kapilh@broadcom.com>
Signed-off-by: Jon Mason <jonmason@broadcom.com>
Acked-by: Scott Branden <sbranden@broadcom.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
The command of install could not handle the special files in exec
testcases, change the default rule to rsync to fix this.
The installation is unchanged after this commit.
Suggested-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Bamvor Jian Zhang <bamvor.zhangjian@linaro.org>
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
Use make's implict rule for building simple C programs.
Suggested-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Bamvor Jian Zhang <bamvor.zhangjian@linaro.org>
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
Change from = to += in order to allows the user to pass whatever
CFLAGS they wish(E.g. pass the proper headers and librareis
(popt.h and libpopt.so) in cross-compiling)
Suggested-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Bamvor Jian Zhang <bamvor.zhangjian@linaro.org>
Acked-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
Commit 2bf9e0ab08 ("locking/static_keys: Provide a selftest")
renamed jump_label directory to static_keys and failed to update
the Makefile, causing the selftests build to fail.
This commit fixes it by updating the Makefile with the new name
and also moves the entry into the correct position to keep the
list alphabetically sorted.
Fixes: 2bf9e0ab08 ("locking/static_keys: Provide a selftest")
Signed-off-by: Bamvor Jian Zhang <bamvor.zhangjian@linaro.org>
Acked-by: Shuah Khan <shuahkh@osg.samsung.com>
Acked-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
