- Add JPEG v5.0.2 SRIOV code path
- Add JPEG MMSCH init table transfer
- Skip unsupported actions such as power gating
and per queue reset for SRIOV VF.
Signed-off-by: Bokun Zhang <Bokun.Zhang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
- Add VCN v5.0.2 SRIOV code path
- Add VCN MMSCH init table transfer
- Skip unsupported actions such as power gating
and per queue reset for SRIOV VF.
Signed-off-by: Bokun Zhang <Bokun.Zhang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
jpeg_v5_0_2_is_idle() initializes ret to false and then accumulates ring
idle status using &=. Since false & condition always remains false, the
function can never report the JPEG block as idle.
Initialize ret to true so the function returns true only when all JPEG
rings report RB_JOB_DONE.
Signed-off-by: Boyuan Zhang <boyuan.zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Replace external find calls with GNU Make’s $(rwildcard …)
to collect files. Depending on ‘find’ can fail if it’s
unavailable or returns no matches, which left CFLAGS_*
unset. In that case, floating-point code was built
with -mno-sse, leading to build failures.
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The fatal error interrupt is broadcast to every device of the hive and
they all race for amdgpu_ras_global_ras_isr(), which hands -EBUSY to
everyone but the winner. Treating that as a failure returns before the
device is marked, so seven devices out of eight are left without their
fatal and SRAM ECC state, the one that actually logged the error among
them. KFD then tells the processes on those devices that the reset was
a plain hang.
-EBUSY only means the reset has already been asked for. Record the
state anyway and leave the request to the winner.
Signed-off-by: Xiang Liu <xiang.liu@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
kfd_signal_reset_event() picks between KFD_HW_EXCEPTION_ECC and
KFD_HW_EXCEPTION_GPU_HANG from the SRAM ECC flag, and only delivers the
memory exception event for the former. Nothing raises that flag on the
RAS module paths, so a reset caused by an uncorrectable or a consumed
poison error is reported to every process on the device as a plain hang
and the runtime carries on instead of tearing the workload down.
Raise it the way the per IP callbacks used to.
Signed-off-by: Xiang Liu <xiang.liu@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The failure paths free the RAS manager but keep the flags that advertise
it as the owner of RAS and of the RAS firmware load. Every entry point
gated on those hits the NULL manager, hw_init turns that into -EINVAL
and the whole probe fails.
Clear both once the manager is gone, and route the allocation failure
through the same place.
Signed-off-by: Xiang Liu <xiang.liu@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
ras_mp1_set_debug_mode() reports -EOPNOTSUPP where the control does not
exist, an SR-IOV guest among them. Treating that as fatal fails
ras_core_sw_init() and takes RAS down on every VF.
Nothing else in the MP1 block depends on it, so carry on.
Signed-off-by: Xiang Liu <xiang.liu@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Different from detect_and_reset, reset_hw_queue performs per queue
reset. Per queue reset setting requires reset_queue_only=1 and hung
queue's doorbell_offset in RESET packet. This packet must be sent to MES
pipe 0(SCHED_PIPE).
We also need to set enable_compute_pipe_reset=1 in SET_HW_RESOURCES so
when queue reset fails, MES will proceed pipe reset.
This patch also fixes a bug in mes_v12_1_reset_hw_queue function. Instead
of using MESAPI__RESET offset for api_status, the existing code uses
MESAPI__REMOVE_QUEUE.
Signed-off-by: Amber Lin <amber.lin@amd.com>
Reviewed-by: Jesse Zhang <Jesse.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
removing MES oversubscription timer will affect both amdgpu/amdkfd, so
add the similar timer for amdgpu userq as well.
Signed-off-by: Eric Huang <jinhuieric.huang@amd.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
the issue only happens with oversubscription when gpu has no
workload, the root cause is mes oversubscription timer, so
disable mes timer and make a similar timer in kfd to resolve
the issue.
Signed-off-by: Eric Huang <jinhuieric.huang@amd.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
new api will be used to workaround a HW scheduler issue
for 100% usage when gpu has no workload.
Signed-off-by: Eric Huang <jinhuieric.huang@amd.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This version brings along the following updates:
- Fix HPO test regressions.
- Refactor DPP_SET_INPUT_TRANSFER_FUNC to drop pipe_ctx params.
- Use fast update path for address-only plane flips.
- Split OPTC_PIPE_CONTROL_LOCK into smaller helpers.
- Fix DPREFCLK override when SMU isn't available.
- Fix CalculateFlipSchedule calculation.
- Add hook to disable alt-ch in PMO.
- Update alt-ch size calculations.
- Enable min dispclk ODM on DCN42.
- Remove RMCM tetrahedral cube from dc_plane_state.
- Fix mismatch number of OPP/DPP accounting.
- Adjust vblank_nom policy for HW SDP throttling.
- Add passthrough visual confirm.
- Expand amdgpu_dm KUnit test coverage across cursor, MST, EDID, HDMI,
IRQ, i2c, framebuffer, tiling/modifier and HPD paths.
- Various fixes for Kunit tests related to HDMI FRL, IRQ and cursors.
Reviewed-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Taimur Hassan <Syed.Hassan@amd.com>
Signed-off-by: Ivan Lipski <ivan.lipski@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why&How]
An interrupt racing DM teardown can reach amdgpu_dm_irq_schedule_work()
after the IRQ workqueue is destroyed, passing a NULL wq to queue_work()
and crashing in __queue_work(). Bail out early when adev->dm.irq_wq is
NULL so a registered handler is simply not queued.
Reviewed-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Ivan Lipski <ivan.lipski@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
The requirement is that VSTARTUP has to come before vsync, line 0.
This means that the VSTARTUP has to be in the blank front porch.
The current implementation in DML2.1 does meet this requirement by
adjusting vblank_nom to the full vblank_avail but this has two
undesirable side effects:
1. When vblank is nominal this pushes VUPDATE on the line after VBLANK
start. For Replay this gives only 1 line worth of time to program the
SDP and blank the DPG. If we miss this window then we have to wait
an entire frame before we can retry IPX entry. Residency is impacted.
2. The prefetch schedule is suboptimal. Instead of leveraging a very
long vblank for power we wake early and block c-state earlier.
[How]
Use the same policy as prior ASIC - clamp the vblank_nom adjustment to
be the maximum of vblank_nom or the size of the back porch + 2 lines.
The back porch includes the vsync width in it in the calculation.
Reviewed-by: Dillon Varone <dillon.varone@amd.com>
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Ivan Lipski <ivan.lipski@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why&How]
Wrapper currently populates the vblank nom as the entire blank for a
given timing. This should be constrained to a sane maximum but still
controlled by the caller's (wrapper) policy, which for now will be the
existing bounding box value.
Reviewed-by: Austin Zheng <Austin.Zheng@amd.com>
Signed-off-by: Dillon Varone <Dillon.Varone@amd.com>
Signed-off-by: Ivan Lipski <ivan.lipski@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
- Added a new visual_confirm mode VISUAL_CONFIRM_DM_PASSTHROUGH so the confirm
color is supplied by the DM instead of computed by DC.
- Relocated struct tg_color above dc_flip_addrs so it can be embedded by value.
Reviewed-by: Joshua Aberback <joshua.aberback@amd.com>
Signed-off-by: Gaghik Khachatrian <gaghik.khachatrian@amd.com>
Signed-off-by: Ivan Lipski <ivan.lipski@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add KUnit tests for amdgpu_dm_create_i2c() covering the OEM i2c adapter
and the hardware i2c bus creation paths.
Assisted-by: Copilot:Claude-Opus-4.8
Reviewed-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Bhawanpreet Lakha <bhawanpreet.lakha@amd.com>
Signed-off-by: Ivan Lipski <ivan.lipski@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add KUnit tests for amdgpu_dm_i2c_xfer() covering a failed hardware
command submission and the OEM i2c path with no device present.
Assisted-by: Copilot:Claude-Opus-4.8
Reviewed-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Bhawanpreet Lakha <bhawanpreet.lakha@amd.com>
Signed-off-by: Ivan Lipski <ivan.lipski@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add KUnit tests for hdmi_frl_status_polling_work() covering the
no-links, no-local-sink, non-HDMI and zero-FRL-rate skip cases, plus
the poll paths that leave the link unchanged or trigger a retrain.
Assisted-by: Copilot:Claude-Opus-4.8
Reviewed-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Bhawanpreet Lakha <bhawanpreet.lakha@amd.com>
Signed-off-by: Ivan Lipski <ivan.lipski@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why&How]
The KUnit connector test references hdmi_frl_status_polling_work(), but the
function was static with no visible prototype, causing a build failure
(undeclared / implicit declaration). Make the function non-static and add
a prototype to amdgpu_dm_connector.h so the test can reference it. The
INIT_DELAYED_WORK setup remains in amdgpu_dm_connector_init_helper(); no
runtime behavior change.
Assisted-by: Copilot:Claude-Opus-4.8
Reviewed-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Ivan Lipski <ivan.lipski@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add a KUnit test for add_fs_modes() confirming that a generated mode
with illegal timing is skipped rather than added.
Assisted-by: Copilot:Claude-Opus-4.8
Reviewed-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Bhawanpreet Lakha <bhawanpreet.lakha@amd.com>
Signed-off-by: Ivan Lipski <ivan.lipski@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add KUnit tests for add_fs_modes() covering successful freesync-video
mode generation and refresh rates that fall outside the supported
range.
Assisted-by: Copilot:Claude-Opus-4.8
Reviewed-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Bhawanpreet Lakha <bhawanpreet.lakha@amd.com>
Signed-off-by: Ivan Lipski <ivan.lipski@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add KUnit tests for amdgpu_dm_prune_primary_tile_modes() covering the
no-sink, no panel-patch and non-tiled early returns, a secondary tile,
and the primary-tile path that prunes per-tile modes.
Assisted-by: Copilot:Claude-Opus-4.8
Reviewed-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Bhawanpreet Lakha <bhawanpreet.lakha@amd.com>
Signed-off-by: Ivan Lipski <ivan.lipski@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY&HOW]
For cases where number of OPP/DPP mismatch, like 4 planes, 1 stream on
a 3 OPP ASIC, mode support would previously fail citing lack of OPP's.
This is incorrect, as the configuration only needs 1 OPP but 4 DPP's.
Reviewed-by: Austin Zheng <austin.zheng@amd.com>
Signed-off-by: Dillon Varone <Dillon.Varone@amd.com>
Signed-off-by: Ivan Lipski <ivan.lipski@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHAT]
Add KUnit tests for amdgpu_dm_dcn10_register_irq_handlers() covering the
add_id() rejections for the VUPDATE and HPD sources and the
invalid-source guard in the VUPDATE_NO_LOCK loop, and for
amdgpu_dm_register_outbox_irq_handlers() rejecting a source with no
funcs table.
[HOW]
Reuse the shared registration fixture and the fake IRQ service that maps
no source IDs.
Assisted-by: Copilot:Claude-Opus-5
Reviewed-by: Bhawanpreet Lakha <bhawanpreet.lakha@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Ivan Lipski <ivan.lipski@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHAT]
Add KUnit tests for amdgpu_dm_dce110_register_irq_handlers() covering
the SOC15 DCE client used from Vega on, the amdgpu_irq_add_id()
rejections for the CRTC, VUPDATE and HPD sources, and the
invalid-source guards in the VBLANK, VUPDATE and PFLIP loops.
[HOW]
Add three fake IRQ services that map only a prefix of the source IDs so
each loop reaches its guard in turn. Clearing a single amdgpu_irq_src's
funcs makes only that source's add_id() fail.
Assisted-by: Copilot:Claude-Opus-5
Reviewed-by: Bhawanpreet Lakha <bhawanpreet.lakha@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Ivan Lipski <ivan.lipski@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHAT]
Add KUnit tests for dm_dmub_outbox1_low_irq() draining a trace ring up
to the DMUB_TRACE_MAX_READ cap, dm_handle_hpd_work() rejecting a work
item with no notification, and amdgpu_dm_irq_schedule_work() not
queueing once the IRQ workqueue is gone.
[HOW]
Back dmub->outbox0_rb with a fake ring whose write pointer sits one
entry past the cap, and keep the ring larger so the read pointer does
not wrap. dm_handle_hpd_work() returns before its own kfree() on the
NULL-notify path, so the test frees the work item.
Assisted-by: Copilot:Claude-Opus-5
Reviewed-by: Bhawanpreet Lakha <bhawanpreet.lakha@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Ivan Lipski <ivan.lipski@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHAT]
Add KUnit tests for handle_hpd_rx_irq() re-detecting a downstream port
change on a non-MST-root connector, amdgpu_dm_hpd_init() skipping a
connector with no dc_link, and dmub_hpd_callback() deferring HPD while
suspended. Also add a writeback connector to the HPD registration test.
[HOW]
The downstream-change test reuses dm_test_setup_hpd_rx_irq() and clears
the MST root state, with dc_link_detect() stubbed to fail. The suspend
test leaves adev->dm.ddev NULL, so reaching the connector walk would
crash.
Assisted-by: Copilot:Claude-Opus-5
Reviewed-by: Bhawanpreet Lakha <bhawanpreet.lakha@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Ivan Lipski <ivan.lipski@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHAT]
Add KUnit tests for handle_hpd_irq_helper() covering a failing
dc_link_detect_connection_type() and the early return taken when a
debounce re-detect is already scheduled. Also arm the debounce work in
the stale-prev-sink test so mod_delayed_work() re-schedules.
[HOW]
Both build on dm_test_setup_hpd_irq_helper() and override only the
link_srv stubs they need. The pending-debounce test arms the work ten
seconds out and spies on dc_link_detect() to prove it was skipped.
Assisted-by: Copilot:Claude-Opus-5
Reviewed-by: Bhawanpreet Lakha <bhawanpreet.lakha@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Ivan Lipski <ivan.lipski@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHAT]
Add KUnit tests for schedule_dc_vmin_vmax(), which had no coverage. Both
callers are exercised: dm_crtc_high_irq() on an AI+ family and the DCE
path of dm_vupdate_high_irq() on a pre-DCE12 family.
[HOW]
Add a dm_test_setup_vmin_vmax_crtc() fixture building a CRTC with an
active VRR stream and a vmin/vmax work queue. Each test flushes the
queue and checks the worker applied the adjust and dropped its stream
reference.
Assisted-by: Copilot:Claude-Opus-5
Reviewed-by: Bhawanpreet Lakha <bhawanpreet.lakha@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Ivan Lipski <ivan.lipski@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHAT]
Add KUnit tests for the two writeback vblanks in dm_crtc_high_irq(): the
first disables frame capture and marks wb_frame_done, the second signals
the out fence and clears the pending state.
[HOW]
dc_stream_fc_disable_writeback() dereferences dc->res_pool before its
NULL-stream check, so supply a dc with a fake IRQ service. The
completion test queues a bare drm_writeback_job and holds a vblank
reference for the completion's drm_crtc_vblank_put().
Assisted-by: Copilot:Claude-Opus-5
Reviewed-by: Bhawanpreet Lakha <bhawanpreet.lakha@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Ivan Lipski <ivan.lipski@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHAT]
Add KUnit tests for pageflip completion: the non-VRR path in
dm_pflip_high_irq(), and the DCN VUPDATE_NO_LOCK paths in
dm_vupdate_high_irq() that deliver the event once the OTG reports no
flip pending, or retire the flip when there are no active planes.
[HOW]
Initialise DRM vblank and hold a reference to balance the handler's
drm_crtc_vblank_put(). A non-zero DCE IP version selects the DCN path,
and a NULL adev->dm.dc makes dc_get_flip_pending_on_otg() report no
pending flip.
Assisted-by: Copilot:Claude-Opus-5
Reviewed-by: Bhawanpreet Lakha <bhawanpreet.lakha@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Ivan Lipski <ivan.lipski@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHAT]
Several amdgpu_dm_irq tests were each open-coding the same setup. Share
it through three functions: dm_test_add_crtc(),
dm_test_setup_hpd_irq_helper() and dm_test_setup_irq_regs().
Assisted-by: Copilot:Claude-Opus-5
Reviewed-by: Bhawanpreet Lakha <bhawanpreet.lakha@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Ivan Lipski <ivan.lipski@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add KUnit tests for amdgpu_set_panel_orientation() covering the non-eDP
early return, the missing native mode case, and a panel that applies
the orientation quirk.
Assisted-by: Copilot:Claude-Opus-4.8
Reviewed-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Bhawanpreet Lakha <bhawanpreet.lakha@amd.com>
Signed-off-by: Ivan Lipski <ivan.lipski@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add KUnit tests driving create_eml_sink() through the valid-EDID
branch: reading the EDID over DDC, and the forced-on paths using an
emulated sink and a cached local sink.
Assisted-by: Copilot:Claude-Opus-4.8
Reviewed-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Bhawanpreet Lakha <bhawanpreet.lakha@amd.com>
Signed-off-by: Ivan Lipski <ivan.lipski@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add KUnit tests for amdgpu_dm_connector_get_modes() covering the
no-EDID default modes, the extra modes added for 128b/132b and analog
links, and the path that adds modes from a valid EDID.
Assisted-by: Copilot:Claude-Opus-4.8
Reviewed-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Bhawanpreet Lakha <bhawanpreet.lakha@amd.com>
Signed-off-by: Ivan Lipski <ivan.lipski@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add a KUnit test that drives amdgpu_dm_connector_funcs_force() through
the valid-EDID branch: a fake i2c adapter serves a valid EDID over the
DDC read protocol so the connector caches drm_edid and, with an emulated
sink and dc_link present, copies the raw EDID into the sink and parses
its caps.
Assisted-by: Copilot:Claude-Opus-4.8
Reviewed-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Bhawanpreet Lakha <bhawanpreet.lakha@amd.com>
Signed-off-by: Ivan Lipski <ivan.lipski@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add KUnit tests for the amdgpu_dm_connector_atomic_check() properties
that force a modeset: privacy-screen, colorspace and content-type
changes, plus the HDR-metadata exit and fill-error branches.
Assisted-by: Copilot:Claude-Opus-4.8
Reviewed-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Bhawanpreet Lakha <bhawanpreet.lakha@amd.com>
Signed-off-by: Ivan Lipski <ivan.lipski@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add KUnit tests for amdgpu_dm_connector_atomic_check() covering the
no-CRTC early return, the DP-MST connector path, and an unchanged state
that skips revalidation.
Assisted-by: Copilot:Claude-Opus-4.8
Reviewed-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Bhawanpreet Lakha <bhawanpreet.lakha@amd.com>
Signed-off-by: Ivan Lipski <ivan.lipski@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add KUnit tests for amdgpu_dm_fill_hdr_info_packet() covering the HDMI
and DisplayPort HDR paths, an unsupported connector signal, and invalid
HDR metadata.
Assisted-by: Copilot:Claude-Opus-4.8
Reviewed-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Bhawanpreet Lakha <bhawanpreet.lakha@amd.com>
Signed-off-by: Ivan Lipski <ivan.lipski@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add a KUnit test driving amdgpu_dm_connector_mode_valid() through the
EDID-management branch for a forced-on connector.
Assisted-by: Copilot:Claude-Opus-4.8
Reviewed-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Bhawanpreet Lakha <bhawanpreet.lakha@amd.com>
Signed-off-by: Ivan Lipski <ivan.lipski@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why&How]
MCM and RMCM both took their cube from struct tetrahedral_params, which is
embedded by value in dc_3dlut and therefore in dc_plane_state and dc.scratch.
RMCM needs a 33x33x33 cube, but that cube is ~421KB, so enabling it in the
shared union - where tetrahedral_33 was left commented out - would push
sizeof(struct dc) past the kmalloc MAX_PAGE_ORDER limit and break kunit
and other allocations.
Drop the unused struct tetrahedral_33x33x33 definition and lut_dim.
Reviewed-by: Dillon Varone <dillon.varone@amd.com>
Reviewed-by: Sridevi Arvindekar <sridevi.arvindekar@amd.com>
Signed-off-by: Rafal Ostrowski <rafal.ostrowski@amd.com>
Signed-off-by: Ivan Lipski <ivan.lipski@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHAT]
Add KUnit tests for amdgpu_dm_plane_handle_cursor_update() and
amdgpu_dm_plane_atomic_async_update() covering the return taken when the
cursor plane has no framebuffer, and the copy of the new position and
size into the plane state ahead of the cursor update.
Assisted-by: Copilot:Claude-Opus-5
Reviewed-by: Bhawanpreet Lakha <bhawanpreet.lakha@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Ivan Lipski <ivan.lipski@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHAT]
Add KUnit tests for amdgpu_dm_plane_helper_prepare_fb() and
amdgpu_dm_plane_helper_cleanup_fb() covering the early return taken when
the plane state carries no framebuffer, so no buffer object is pinned or
unpinned.
Assisted-by: Copilot:Claude-Opus-5
Reviewed-by: Bhawanpreet Lakha <bhawanpreet.lakha@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Ivan Lipski <ivan.lipski@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHAT]
Add KUnit tests for amdgpu_dm_plane_get_plane_modifiers() and
amdgpu_dm_plane_format_mod_supported() on a GFX6-8 device. The exposed
list holds one macro tiled modifier per distinct bits per pixel plus a
micro tiled and a linear one, and a listed modifier is validated through
the GFX6-8 specific check.
Add dm_test_mods_count() for the list length and use it in the existing
sentinel scans.
Assisted-by: Copilot:Claude-Opus-5
Reviewed-by: Bhawanpreet Lakha <bhawanpreet.lakha@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Ivan Lipski <ivan.lipski@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHAT]
Add KUnit tests for amdgpu_dm_plane_calc_gfx6_mod() and
amdgpu_dm_plane_gfx6_format_mod_supported() covering the micro tiled
early return, the GFX7-8 macro tile mode table lookup, the GFX6 tile
mode register fields, and the rejection of foreign, DCC, newer tile
version, GFX9+ and non-displayable modifiers.
Assisted-by: Copilot:Claude-Opus-5
Reviewed-by: Bhawanpreet Lakha <bhawanpreet.lakha@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Ivan Lipski <ivan.lipski@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHAT]
Add KUnit tests for amdgpu_dm_plane_get_gfx6_tile_idx(),
amdgpu_dm_plane_calc_gfx7_tile_split() and
amdgpu_dm_plane_get_gfx7_macro_tile_idx() covering the per-family tile
mode index selection, the tile split derived from the sample split
factor with its 256 byte and memory row size clamps, and the macro tile
index capped by the tile split.
Assisted-by: Copilot:Claude-Opus-5
Reviewed-by: Bhawanpreet Lakha <bhawanpreet.lakha@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Ivan Lipski <ivan.lipski@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHAT]
Add KUnit tests for amdgpu_dm_plane_fill_gfx6_tiling_info_from_modifier()
covering the linear, micro tiled and macro tiled modifiers, and the
rejection of a modifier that is not of the GFX6 tile version.
Assisted-by: Copilot:Claude-Opus-5
Reviewed-by: Bhawanpreet Lakha <bhawanpreet.lakha@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Ivan Lipski <ivan.lipski@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHAT]
Add KUnit tests for amdgpu_dm_plane_add_modifier_dedup() covering a
modifier already present in the list, which is not appended a second
time, a new modifier, which is appended, and a NULL list left over from
an earlier allocation failure, which is a no-op.
Assisted-by: Copilot:Claude-Opus-5
Reviewed-by: Bhawanpreet Lakha <bhawanpreet.lakha@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Ivan Lipski <ivan.lipski@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
