[ Upstream commit 822bc5b374 ]
The Lenovo Yoga Book 9i is a dual-screen laptop, with a single composite
USB device providing both touch and tablet interfaces for both screens.
All inputs report through a single device, differentiated solely by report
numbers. As there is no way for udev to differentiate the inputs based on
USB vendor/product ID or interface numbers, custom naming is required to
match against for downstream configuration. A firmware bug also results
in an erroneous InRange message report being received after the stylus
leaves proximity, blocking later touch events. Add required quirks for
Gen 8 to Gen 10 models, including a new quirk providing for custom input
device naming and dropping erroneous InRange reports.
Signed-off-by: Brian Howard <blhoward2@gmail.com>
Tested-by: Brian Howard <blhoward2@gmail.com>
Tested-by: Kris Fredrick <linux.baguette800@slmail.me>
Reported-by: Andrei Shumailov <gentoo1993@gmail.com>
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=220386
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e01a029654 ]
Some games (mainly observed with Kylotonn's WRC Serises) set trigger
button to a random value, or always the same one, out of range.
I observed 307 and other values but, for example, my Moza R9 only
exposes 128 buttons AND it's trigger button field is 8-bit. This causes
errors to appear in dmesg.
Only set the trigger button and trigger interval in the trigger button
is in range of the field.
Signed-off-by: Tomasz Pakuła <tomasz.pakula.oficjalny@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7273acfd0a ]
The SoNiX KN85 keyboard identifies as the "Apple, Inc. Aluminium
Keyboard" and is not recognized as a non-apple keyboard. Adding "SoNiX
KN85 Keyboard" to the list of non-apple keyboards fixes the function
keys.
Signed-off-by: Joey Bednar <linux@joeybednar.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit bd8150a1b3 ]
This commit simplifies the amdgpu_gem_va_ioctl function, key updates
include:
- Moved the logic for managing the last update fence directly into
amdgpu_gem_va_update_vm.
- Introduced checks for the timeline point to enable conditional
replacement or addition of fences.
v2: Addressed review comments from Christian.
v3: Updated comments (Christian).
v4: The previous version selected the fence too early and did not manage its
reference correctly, which could lead to stale or freed fences being used.
This resulted in refcount underflows and could crash when updating GPU
timelines.
The fence is now chosen only after the VA mapping work is completed, and its
reference is taken safely. After exporting it to the VM timeline syncobj, the
driver always drops its local fence reference, ensuring balanced refcounting
and avoiding use-after-free on dma_fence.
Crash signature:
[ 205.828135] refcount_t: underflow; use-after-free.
[ 205.832963] WARNING: CPU: 30 PID: 7274 at lib/refcount.c:28 refcount_warn_saturate+0xbe/0x110
...
[ 206.074014] Call Trace:
[ 206.076488] <TASK>
[ 206.078608] amdgpu_gem_va_ioctl+0x6ea/0x740 [amdgpu]
[ 206.084040] ? __pfx_amdgpu_gem_va_ioctl+0x10/0x10 [amdgpu]
[ 206.089994] drm_ioctl_kernel+0x86/0xe0 [drm]
[ 206.094415] drm_ioctl+0x26e/0x520 [drm]
[ 206.098424] ? __pfx_amdgpu_gem_va_ioctl+0x10/0x10 [amdgpu]
[ 206.104402] amdgpu_drm_ioctl+0x4b/0x80 [amdgpu]
[ 206.109387] __x64_sys_ioctl+0x96/0xe0
[ 206.113156] do_syscall_64+0x66/0x2d0
...
[ 206.553351] BUG: unable to handle page fault for address: ffffffffc0dfde90
...
[ 206.553378] RIP: 0010:dma_fence_signal_timestamp_locked+0x39/0xe0
...
[ 206.553405] Call Trace:
[ 206.553409] <IRQ>
[ 206.553415] ? __pfx_drm_sched_fence_free_rcu+0x10/0x10 [gpu_sched]
[ 206.553424] dma_fence_signal+0x30/0x60
[ 206.553427] drm_sched_job_done.isra.0+0x123/0x150 [gpu_sched]
[ 206.553434] dma_fence_signal_timestamp_locked+0x6e/0xe0
[ 206.553437] dma_fence_signal+0x30/0x60
[ 206.553441] amdgpu_fence_process+0xd8/0x150 [amdgpu]
[ 206.553854] sdma_v4_0_process_trap_irq+0x97/0xb0 [amdgpu]
[ 206.554353] edac_mce_amd(E) ee1004(E)
[ 206.554270] amdgpu_irq_dispatch+0x150/0x230 [amdgpu]
[ 206.554702] amdgpu_ih_process+0x6a/0x180 [amdgpu]
[ 206.555101] amdgpu_irq_handler+0x23/0x60 [amdgpu]
[ 206.555500] __handle_irq_event_percpu+0x4a/0x1c0
[ 206.555506] handle_irq_event+0x38/0x80
[ 206.555509] handle_edge_irq+0x92/0x1e0
[ 206.555513] __common_interrupt+0x3e/0xb0
[ 206.555519] common_interrupt+0x80/0xa0
[ 206.555525] </IRQ>
[ 206.555527] <TASK>
...
[ 206.555650] RIP: 0010:dma_fence_signal_timestamp_locked+0x39/0xe0
...
[ 206.555667] Kernel panic - not syncing: Fatal exception in interrupt
Link: https://patchwork.freedesktop.org/patch/654669/
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Suggested-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c979d8db7b ]
Trying to access link enc on a dpia link will cause a crash otherwise
Reviewed-by: Charlene Liu <charlene.liu@amd.com>
Signed-off-by: Dmytro Laktyushkin <dmytro.laktyushkin@amd.com>
Signed-off-by: Chenyu Chen <chen-yu.chen@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c8cf9ddc54 ]
Only set an error on the fence if the fence is not
signalled. We can end up with a warning if the
per queue reset path signals the fence and sets an error
as part of the reset, but fails to recover.
Reviewed-by: Timur Kristóf <timur.kristof@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 878a4b73c1 ]
[why]
Need to add function hook check before use
Reviewed-by: Mohit Bawa <mohit.bawa@amd.com>
Signed-off-by: Charlene Liu <Charlene.Liu@amd.com>
Signed-off-by: Chenyu Chen <chen-yu.chen@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e2fd14f579 ]
This initializes HDP IP version 6.1.1.
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Tim Huang <tim.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3e92d7e493 ]
This is not supported by the hardware and trying to decode
these leads to LAT timeout errors.
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5da0380de4 ]
CMD_STOP being sent to encoder before last job is executed by device_run
can lead to an occasional dropped frame. Ensure that remaining ready
buffers are drained by making a call to v4l2_m2m_try_schedule.
Signed-off-by: Brandon Brnich <b-brnich@ti.com>
Reviewed-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b4e26c6fc1 ]
When STREAMON(CAP) is called after STREAMON(OUT), the driver was failing to
switch states from VPU_INST_STATE_OPEN to VPU_INST_STATE_INIT_SEQ and
VPU_INST_STATE_PIC_RUN because the capture queue streaming boolean had not
yet been set to true. This led to a hang in the encoder since the state
was stuck in VPU_INST_STATE_OPEN. During the second call to
start_streaming, the sequence initialization and frame buffer allocation
should occur.
Signed-off-by: Brandon Brnich <b-brnich@ti.com>
Reviewed-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7575b8dfa9 ]
Initialize the v4l2_format to a default. Empty formats are
not allowed in V4L2, so this fixes v4l2-compliance issues:
fail: v4l2-test-formats.cpp(514): !pix.width || !pix.height
test VIDIOC_G_FMT: FAIL
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 17e1e1641f ]
If prev->input != PREVIEW_INPUT_MEMORY the width and height weren't
clamped. Just always clamp.
This fixes a v4l2-compliance error:
fail: v4l2-test-subdevs.cpp(171): fse.max_width == ~0U || fse.max_height == ~0U
fail: v4l2-test-subdevs.cpp(270): ret && ret != ENOTTY
test Try VIDIOC_SUBDEV_ENUM_MBUS_CODE/FRAME_SIZE/FRAME_INTERVAL: FAIL
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 44c03802a5 ]
The isp_video_mbus_to_pix/pix_to_mbus functions did not take
the last empty entry { 0, } of the formats array into account.
As a result, isp_video_mbus_to_pix would accept code 0 and
isp_video_pix_to_mbus would select code 0 if no match was found.
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1ac3be217c ]
When SPI communication is suspended by hardware automatically, it could
happen that few bits of next frame are already clocked out due to
internal synchronization delay.
To achieve a safe suspension, we need to ensure that each word must be
at least 8 SPI clock cycles long. That's why, if bpw is less than 8
bits, we need to use midi to reach 8 SPI clock cycles at least.
This will ensure that each word achieve safe suspension and prevent
overrun condition.
Signed-off-by: Deepak Kumar <deepak.kumar01@st.com>
Signed-off-by: Alain Volmat <alain.volmat@foss.st.com>
Link: https://patch.msgid.link/20251218-stm32-spi-enhancements-v2-2-3b69901ca9fe@foss.st.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c4e620eccb ]
Currently the buffers are being filled until full, which works fine
for the transport stream, but not when reading sections, those have
to be returned to userspace immediately, otherwise dvbv5-scan will
just wait forever.
Add a 'flush' argument to dvb_vb2_fill_buffer to indicate whether
the buffer must be flushed or wait until it is full.
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d96cb0b86d ]
There are message types when we would need to send a payload along with
the LARGE_CONFIG_GET message to provide information to the firmware on
what data is requested.
Such cases are the ALSA Kcontrol related messages when the high level
param_id tells only the type of the control, but the ID/index of the exact
control is specified in the payload area.
The caller must place the payload for TX before calling the set_get_data()
and this payload will be sent alongside with the message to the firmware.
The data area will be overwritten by the received data from firmware.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Seppo Ingalsuo <seppo.ingalsuo@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://patch.msgid.link/20251217143945.2667-7-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9aeb31b245 ]
[WHY]
User may connect mst dock with multi monitors and do quick unplug
and plug in one of the monitor. This operatioin may create CSN from
dock to display driver. Then display driver would disable and then enable
mst link and also disable/enable DPCD mst_en bit in dock RX. However,
when mst_en bit being disabled, if dock has another CSN message to
transmit then the message would be removed because of the disabling of
mst_en. In this case, the message is missing and it ends up no display in
the replugged monitor.
[HOW]
Don't disable mst_en bit when link still has sink connected.
Reviewed-by: Wenjing Liu <wenjing.liu@amd.com>
Signed-off-by: Peichen Huang <PeiChen.Huang@amd.com>
Signed-off-by: Chenyu Chen <chen-yu.chen@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit cea573a8e1 ]
[Why]
USB-C DisplayPort Alt Mode with concurrent USB data needs lane count
limitation to prevent incorrect 4-lane DP configuration when only 2 lanes
are available due to hardware lane sharing between DP and USB3.
[How]
Query DMUB for Alt Mode status (is_dp_alt_disable, is_usb, is_dp4) in
dcn32_link_encoder_get_max_link_cap() and cap DP to 2 lanes when USB is
active on USB-C port. Added inline documentation explaining the USB-C
lane sharing constraint.
Reviewed-by: PeiChen Huang <peichen.huang@amd.com>
Signed-off-by: LinCheng Ku <lincheng.ku@amd.com>
Signed-off-by: Chenyu Chen <chen-yu.chen@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9f0736a4e1 ]
The recent refactoring of where runtime PM is enabled done in commit
f1eb4e792b ("spi: spi-cadence-quadspi: Enable pm runtime earlier to
avoid imbalance") made the fact that when we do a pm_runtime_disable()
in the error paths of probe() we can trigger a runtime disable which in
turn results in duplicate clock disables. This is particularly likely
to happen when there is missing or broken DT description for the flashes
attached to the controller.
Early on in the probe function we do a pm_runtime_get_noresume() since
the probe function leaves the device in a powered up state but in the
error path we can't assume that PM is enabled so we also manually
disable everything, including clocks. This means that when runtime PM is
active both it and the probe function release the same reference to the
main clock for the IP, triggering warnings from the clock subsystem:
[ 8.693719] clk:75:7 already disabled
[ 8.693791] WARNING: CPU: 1 PID: 185 at /usr/src/kernel/drivers/clk/clk.c:1188 clk_core_disable+0xa0/0xb
...
[ 8.694261] clk_core_disable+0xa0/0xb4 (P)
[ 8.694272] clk_disable+0x38/0x60
[ 8.694283] cqspi_probe+0x7c8/0xc5c [spi_cadence_quadspi]
[ 8.694309] platform_probe+0x5c/0xa4
Dealing with this issue properly is complicated by the fact that we
don't know if runtime PM is active so can't tell if it will disable the
clocks or not. We can, however, sidestep the issue for the flash
descriptions by moving their parsing to when we parse the controller
properties which also save us doing a bunch of setup which can never be
used so let's do that.
Reported-by: Francesco Dolcini <francesco@dolcini.it>
Closes: https://lore.kernel.org/r/20251201072844.GA6785@francesco-nb
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://patch.msgid.link/20251204-spi-cadence-qspi-runtime-pm-imbalance-v2-1-10af9115d531@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit fb2bbe3838 ]
mas->cur_bits_per_word may not reflect the value of xfer->bits_per_word
when can_dma() is called. Use the right value instead.
Signed-off-by: Jonathan Marek <jonathan@marek.ca>
Link: https://patch.msgid.link/20251120211204.24078-3-jonathan@marek.ca
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 739062a9f1 ]
setup_fifo_params assumes these will be zero, it won't write these
registers if the initial mode is zero.
Signed-off-by: Jonathan Marek <jonathan@marek.ca>
Link: https://patch.msgid.link/20251120211204.24078-4-jonathan@marek.ca
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5b57c3c3f2 ]
Only check and drain IH1 ring if CAM is not enabled.
If GPU is under reset, don't access IH to drain retry fault.
Signed-off-by: Philip Yang <Philip.Yang@amd.com>
Reviewed-by: Harish Kasiviswanathan <Harish.Kasiviswanathan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit bcd752c706 ]
A 14-inch 2560x1600 60Hz matte touch panel, found on a Dell Latitude 7455
laptop (second-source with BOE NE14QDM), according to online sources it's
also found on the Latitude 7440 and some ASUS models.
Raw EDID dump:
00 ff ff ff ff ff ff 00 06 af a4 0b 00 00 00 00
00 20 01 04 a5 1e 13 78 03 ad f5 a8 54 47 9c 24
0e 50 54 00 00 00 01 01 01 01 01 01 01 01 01 01
01 01 01 01 01 01 f0 68 00 a0 a0 40 2e 60 30 20
35 00 2d bc 10 00 00 1a f3 53 00 a0 a0 40 2e 60
30 20 35 00 2d bc 10 00 00 1a 00 00 00 fe 00 36
39 52 31 57 80 42 31 34 30 51 41 58 00 00 00 00
00 02 41 21 a8 00 01 00 00 1a 41 0a 20 20 00 a1
Don't have datasheet access, but the same timing as for other panels from
the same manufacturer works fine.
Signed-off-by: Val Packett <val@packett.cool>
[dianders: Moved to the right location in the table]
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://patch.msgid.link/20251206173739.2222940-1-val@packett.cool
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7dedb906cd ]
[WHY&HOW]
If DMCUB is not initialized or FAMS2 is not supported, the
interface should not be called.
Reviewed-by: Sridevi Arvindekar <sridevi.arvindekar@amd.com>
Signed-off-by: Dillon Varone <Dillon.Varone@amd.com>
Signed-off-by: Roman Li <roman.li@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 531fe6e0fe ]
[WHY&HOW]
The condition is only perform toggle if FIXED_VS LTTPR reports
no IEEE OUI.
The literal "\x0,\x0,\x0" contains commas changes the
bytes being compared to {0x00,0x2C,0X00}.
The correct literal should be "\x00\x00\x00" without commas.
Reviewed-by: Charlene Liu <charlene.liu@amd.com>
Reviewed-by: Wenjing Liu <wenjing.liu@amd.com>
Signed-off-by: Jing Zhou <Jing.Zhou@amd.com>
Signed-off-by: Roman Li <roman.li@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f752e79d38 ]
__amdgpu_ras_restore_bad_pages is responsible for the maintenance of bad
page number, drop the unnecessary bad page number update in the error
handling path of add_bad_pages.
Signed-off-by: Tao Zhou <tao.zhou1@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9877a865d6 ]
If SDMA block not enabled, buffer_funcs will not initialize,
fix the null pointer issue if buffer_funcs not initialized.
Signed-off-by: Likun Gao <Likun.Gao@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit cd77d5a4aa ]
In mailbox_get_msg(), mailbox_reg_read_non_zero() is called to poll for a
non-zero tail pointer. This assumed that a zero value indicates an error.
However, certain corner cases legitimately produce a zero tail pointer.
To handle these cases, remove mailbox_reg_read_non_zero(). The zero tail
pointer will be treated as a valid rewind event.
Reviewed-by: Maciej Falkowski <maciej.falkowski@linux.intel.com>
Signed-off-by: Lizhi Hou <lizhi.hou@amd.com>
Link: https://patch.msgid.link/20251204181603.793824-1-lizhi.hou@amd.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2976aeb0de ]
Add an eDP panel entry for AUO B140HAN06.4 that is also used in
some variants of Lenovo Flex 5G with Qcom SC8180 SoC.
The raw edid of the panel is:
00 ff ff ff ff ff ff 00 06 af 3d 64 00 00 00 00
2b 1d 01 04 a5 1f 11 78 03 b8 1a a6 54 4a 9b 26
0e 52 55 00 00 00 01 01 01 01 01 01 01 01 01 01
01 01 01 01 01 01 14 37 80 b8 70 38 24 40 10 10
3e 00 35 ae 10 00 00 18 10 2c 80 b8 70 38 24 40
10 10 3e 00 35 ae 10 00 00 18 00 00 00 fe 00 41
55 4f 0a 20 20 20 20 20 20 20 20 20 00 00 00 fe
00 42 31 34 30 48 41 4e 30 36 2e 34 20 0a 00 eb
I do not have access to the datasheet and but it is tested on above
mentioned laptop for a few weeks and seems to work just fine with
timing info of similar panels.
Cc: Bjorn Andersson <andersson@kernel.org>
Cc: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Alexey Klimov <alexey.klimov@linaro.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://patch.msgid.link/20251203074555.690613-1-alexey.klimov@linaro.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d2c6fde56d ]
There's currently no situation where we want to issue a command to an
AS and not wait for this command to complete. The wait is either
explicitly done (LOCK, UNLOCK) or it's missing (UPDATE). So let's
turn write_cmd() into as_send_cmd_and_wait() that has the wait after
a command is sent.
v2:
- New patch
v3:
- Collect R-b
v4:
- No changes
Reviewed-by: Steven Price <steven.price@arm.com>
Link: https://patch.msgid.link/20251128084841.3804658-2-boris.brezillon@collabora.com
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7f08cc5b3c ]
The MAP operation for a CPU address mirror VMA does not require ufence
association because such mappings are not GPU-synchronized and do not
participate in GPU job completion signaling.
Remove the unnecessary ufence addition for this case to avoid -EBUSY
failure in check_ufence of unbind ops.
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patch.msgid.link/20251125075628.1182481-6-himal.prasad.ghimiray@intel.com
Signed-off-by: Himal Prasad Ghimiray <himal.prasad.ghimiray@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6028f59620 ]
xe_vma_userptr_pin_pages can return -EBUSY but -EBUSY has special
meaning in VM bind IOCTLs that user fence is pending that is attached to
the VMA. Convert -EBUSY to -ENOMEM in this case as -EBUSY in practice
means we are low or out of memory.
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Tejas Upadhyay <tejas.upadhyay@intel.com>
Link: https://patch.msgid.link/20251122012502.382587-2-matthew.brost@intel.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8a579f4b24 ]
Switch the GGTT code to scope-based runtime PM for consistency with
other parts of the driver.
Reviewed-by: Gustavo Sousa <gustavo.sousa@intel.com>
Link: https://patch.msgid.link/20251118164338.3572146-51-matthew.d.roper@intel.com
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f6ef3d9ff8 ]
imx8m_soc_prepare() directly returns the result of clk_prepare_enable(),
which skips proper cleanup if the clock enable fails. Check the return
value of clk_prepare_enable() and release resources if failure.
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <error27@gmail.com>
Closes: https://lore.kernel.org/r/202601111406.ZVV3YaiU-lkp@intel.com/
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Marco Felsch <m.felsch@pengutronix.de>
Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit dfa93788dd ]
The USB2 port on Smaug is configured for OTG operation but lacked the
required 'usb-role-switch' property, leading to a failed probe and a
non-functioning USB port. Add the property along with setting the default
role to host.
Signed-off-by: Diogo Ivo <diogo.ivo@tecnico.ulisboa.pt>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 41ca2155d6 ]
Intel Amston Lake SoCs with IBECC (In-Band ECC) capability share the same
IBECC registers as Alder Lake-N SoCs. Add two new compute die IDs for
Amston Lake SoC products to enable EDAC support.
Signed-off-by: Qiuxu Zhuo <qiuxu.zhuo@intel.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
Tested-by: Jianfeng Gao <jianfeng.gao@intel.com>
Link: https://patch.msgid.link/20251124065457.3630949-2-qiuxu.zhuo@intel.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c197179990 ]
This reverts commit 06d22ed6b6.
OP-TEE logic in U-Boot automatically injects a reserved-memory
node along with optee firmware node to kernel device tree.
The injection logic is dependent on that there is no manually
defined optee node. Having the node in zynqmp.dtsi effectively
breaks OP-TEE's insertion of the reserved-memory node, causing
memory access violations during runtime.
Signed-off-by: Tomas Melin <tomas.melin@vaisala.com>
Signed-off-by: Michal Simek <michal.simek@amd.com>
Link: https://lore.kernel.org/r/20251125-revert-zynqmp-optee-v1-1-d2ce4c0fcaf6@vaisala.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9fda364cb7 ]
ffa_init() maps the Rx/Tx buffers via ffa_rxtx_map() but on the
partition setup failure path it never unmaps them.
Add the missing ffa_rxtx_unmap() call in the error path so that
the Rx/Tx buffers are properly released before freeing the backing
pages.
Signed-off-by: Haoxiang Li <lihaoxiang@isrc.iscas.ac.cn>
Message-Id: <20251210031656.56194-1-lihaoxiang@isrc.iscas.ac.cn>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 05363abc76 ]
In persistent_ram_vmap(), vmap() may return NULL on failure.
If offset is non-zero, adding offset_in_page(start) causes the function
to return a non-NULL pointer even though the mapping failed.
persistent_ram_buffer_map() therefore incorrectly returns success.
Subsequent access to prz->buffer may dereference an invalid address
and cause crashes.
Add proper NULL checking for vmap() failures.
Signed-off-by: Ruipeng Qi <ruipengqi3@gmail.com>
Link: https://patch.msgid.link/20260203020358.3315299-1-ruipengqi3@gmail.com
Signed-off-by: Kees Cook <kees@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6080fb2116 ]
Updating "ppos" on error conditions does not make much sense. The pattern
is to return the error code directly without modifying the position, or
modify the position on success and return the number of bytes written.
Since on success, the return value of apply is 0, there is no point in
modifying ppos either. Fix it by removing all this and just returning
error code or number of bytes written on success.
Signed-off-by: Joel Fernandes <joelagnelf@nvidia.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Juri Lelli <juri.lelli@redhat.com>
Reviewed-by: Andrea Righi <arighi@nvidia.com>
Acked-by: Tejun Heo <tj@kernel.org>
Tested-by: Christian Loehle <christian.loehle@arm.com>
Link: https://patch.msgid.link/20260126100050.3854740-3-arighi@nvidia.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
