- Add __counted_by to struct clk_hw_onecell_data and struct spmi_pmic_div_clk_cc
- Remove non-OF mmp clk drivers
- Move number of clks from DT headers to drivers
* clk-imx:
clk: imx: pll14xx: dynamically configure PLL for 393216000/361267200Hz
clk: imx: pll14xx: align pdiv with reference manual
clk: imx: composite-8m: fix clock pauses when set_rate would be a no-op
clk: imx25: make __mx25_clocks_init return void
clk: imx25: print silicon revision during init
dt-bindings: clocks: imx8mp: make sai4 a dummy clock
clk: imx8mp: fix sai4 clock
clk: imx: imx8ulp: update SPLL2 type
clk: imx: pllv4: Fix SPLL2 MULT range
clk: imx: imx8: add audio clock mux driver
dt-bindings: clock: fsl,imx8-acm: Add audio clock mux support
clk: imx: clk-imx8qxp-lpcg: Convert to devm_platform_ioremap_resource()
clk: imx: clk-gpr-mux: Simplify .determine_rate()
clk: imx: Add 519.75MHz frequency support for imx9 pll
clk: imx93: Add PDM IPG clk
dt-bindings: clock: imx93: Add PDM IPG clk
* clk-samsung:
dt-bindings: clock: samsung: remove define with number of clocks
clk: samsung: exynoautov9: do not define number of clocks in bindings
clk: samsung: exynos850: do not define number of clocks in bindings
clk: samsung: exynos7885: do not define number of clocks in bindings
clk: samsung: exynos5433: do not define number of clocks in bindings
clk: samsung: exynos5420: do not define number of clocks in bindings
clk: samsung: exynos5410: do not define number of clocks in bindings
clk: samsung: exynos5260: do not define number of clocks in bindings
clk: samsung: exynos5250: do not define number of clocks in bindings
clk: samsung: exynos4: do not define number of clocks in bindings
clk: samsung: exynos3250: do not define number of clocks in bindings
* clk-annotate:
clk: qcom: clk-spmi-pmic-div: Annotate struct spmi_pmic_div_clk_cc with __counted_by
clk: Annotate struct clk_hw_onecell_data with __counted_by
* clk-marvell:
clk: pxa910: Move number of clocks to driver source
clk: pxa1928: Move number of clocks to driver source
clk: pxa168: Move number of clocks to driver source
clk: mmp2: Move number of clocks to driver source
clk: mmp: Remove old non-OF clock drivers
* clk-lmk:
clk: lmk04832: Support using PLL1_LD as SPI readback pin
clk: lmk04832: Don't disable vco clock on probe fail
clk: lmk04832: Set missing parent_names for output clocks
- Add Versa3 clk generator to support 48KHz playback/record with audio
codec on RZ/G2L SMARC EVK
- Introduce kstrdup_and_replace() and use it
* clk-versa:
clk: vc7: Use i2c_get_match_data() instead of device_get_match_data()
clk: vc5: Use i2c_get_match_data() instead of device_get_match_data()
clk: versaclock3: Switch to use i2c_driver's probe callback
clk: Add support for versa3 clock driver
dt-bindings: clock: Add Renesas versa3 clock generator bindings
* clk-strdup:
clk: ti: Replace kstrdup() + strreplace() with kstrdup_and_replace()
clk: tegra: Replace kstrdup() + strreplace() with kstrdup_and_replace()
driver core: Replace kstrdup() + strreplace() with kstrdup_and_replace()
lib/string_helpers: Add kstrdup_and_replace() helper
* clk-amlogic: (22 commits)
dt-bindings: soc: amlogic: document System Control registers
dt-bindings: clock: amlogic: convert amlogic,gxbb-aoclkc.txt to dt-schema
dt-bindings: clock: amlogic: convert amlogic,gxbb-clkc.txt to dt-schema
clk: meson: axg-audio: move bindings include to main driver
clk: meson: meson8b: move bindings include to main driver
clk: meson: a1: move bindings include to main driver
clk: meson: eeclk: move bindings include to main driver
clk: meson: aoclk: move bindings include to main driver
dt-bindings: clk: axg-audio-clkc: expose all clock ids
dt-bindings: clk: amlogic,a1-pll-clkc: expose all clock ids
dt-bindings: clk: amlogic,a1-peripherals-clkc: expose all clock ids
dt-bindings: clk: meson8b-clkc: expose all clock ids
dt-bindings: clk: g12a-aoclkc: expose all clock ids
dt-bindings: clk: g12a-clks: expose all clock ids
dt-bindings: clk: axg-clkc: expose all clock ids
dt-bindings: clk: gxbb-clkc: expose all clock ids
clk: meson: migrate axg-audio out of hw_onecell_data to drop NR_CLKS
clk: meson: migrate meson8b out of hw_onecell_data to drop NR_CLKS
clk: meson: migrate a1 clock drivers out of hw_onecell_data to drop NR_CLKS
clk: meson: migrate meson-aoclk out of hw_onecell_data to drop NR_CLKS
...
* clk-allwinner:
clk: sunxi-ng: nkm: Prefer current parent rate
clk: sunxi-ng: a64: select closest rate for pll-video0
clk: sunxi-ng: div: Support finding closest rate
clk: sunxi-ng: mux: Support finding closest rate
clk: sunxi-ng: nkm: Support finding closest rate
clk: sunxi-ng: nm: Support finding closest rate
clk: sunxi-ng: Add helper function to find closest rate
clk: sunxi-ng: Add feature to find closest rate
clk: sunxi-ng: a64: allow pll-mipi to set parent's rate
clk: sunxi-ng: nkm: consider alternative parent rates when determining rate
clk: sunxi-ng: nkm: Use correct parameter name for parent HW
clk: sunxi-ng: Modify mismatched function name
clk: sunxi: sun9i-mmc: Use devm_platform_get_and_ioremap_resource()
* clk-rockchip:
clk: rockchip: rv1126: Add PD_VO clock tree
clk: rockchip: rk3568: Fix PLL rate setting for 78.75MHz
clk: rockchip: rk3568: Add PLL rate for 101MHz
CONFIG_SM_GCC_8450 depends on ARM64 but it is selected by
CONFIG_SM_GPUCC_8450, which can be selected on ARM, resulting in a
Kconfig warning.
WARNING: unmet direct dependencies detected for SM_GCC_8450
Depends on [n]: COMMON_CLK [=y] && COMMON_CLK_QCOM [=y] && (ARM64 || COMPILE_TEST [=n])
Selected by [y]:
- SM_GPUCC_8450 [=y] && COMMON_CLK [=y] && COMMON_CLK_QCOM [=y]
Add the same dependencies to CONFIG_SM_GPUCC_8450 to resolve the
warning.
Fixes: 728692d49e ("clk: qcom: Add support for SM8450 GPUCC")
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Link: https://lore.kernel.org/r/20230829-fix-sm_gpucc_8550-deps-v1-1-d751f6cd35b2@kernel.org
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
The PLL1_PD pin (a.k.a. STATUS_LD1) can be used as SPI readback pin. Make
this possible.
Signed-off-by: Mike Looijmans <mike.looijmans@topic.nl>
Link: https://lore.kernel.org/r/20230802064100.15793-3-mike.looijmans@topic.nl
Reviewed-by: Liam Beguin <liambeguin@gmail.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
The probe() method never calls clk_prepare_enable(), so it should not
call clk_disable_unprepare() for the vco.clk in the error path. Fixes
a "lmk-vco already disabled" BUG when probe fails.
Signed-off-by: Mike Looijmans <mike.looijmans@topic.nl>
Link: https://lore.kernel.org/r/20230802064100.15793-2-mike.looijmans@topic.nl
Reviewed-by: Liam Beguin <liambeguin@gmail.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
lmk04832_register_clkout forgot to fill in the parent_names, resulting
in the error message "Must specify parents if num_parents > 0".
Signed-off-by: Mike Looijmans <mike.looijmans@topic.nl>
Link: https://lore.kernel.org/r/20230802064100.15793-1-mike.looijmans@topic.nl
Reviewed-by: Liam Beguin <liambeguin@gmail.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Convert platform_get_resource(), devm_ioremap_resource() to a single
call to devm_platform_get_and_ioremap_resource(), as this is exactly
what this function does.
Signed-off-by: Yangtao Li <frank.li@vivo.com>
Link: https://lore.kernel.org/r/20230705065313.67043-10-frank.li@vivo.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
The number of clocks should not be in the dt binding as it is not used
by the respective device tree and thus needlessly bloats the ABI.
Move this number of clocks into the driver source.
Signed-off-by: Duje Mihanović <duje.mihanovic@skole.hr>
Link: https://lore.kernel.org/r/20230812-mmp-nr-clks-v2-4-f9271bd7eaa5@skole.hr
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
The number of clocks should not be in the dt binding as it is not used
by the respective device tree and thus needlessly bloats the ABI.
Move this number of clocks into the driver source.
Signed-off-by: Duje Mihanović <duje.mihanovic@skole.hr>
Link: https://lore.kernel.org/r/20230812-mmp-nr-clks-v2-3-f9271bd7eaa5@skole.hr
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
The number of clocks should not be in the dt binding as it is not used
by the respective device tree and thus needlessly bloats the ABI.
Move this number of clocks into the driver source.
Signed-off-by: Duje Mihanović <duje.mihanovic@skole.hr>
Link: https://lore.kernel.org/r/20230812-mmp-nr-clks-v2-2-f9271bd7eaa5@skole.hr
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
The number of clocks should not be in the dt binding as it is not used
by the respective device tree and thus needlessly bloats the ABI.
Move this number of clocks into the driver source.
Signed-off-by: Duje Mihanović <duje.mihanovic@skole.hr>
Link: https://lore.kernel.org/r/20230812-mmp-nr-clks-v2-1-f9271bd7eaa5@skole.hr
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Prepare for the coming implementation by GCC and Clang of the __counted_by
attribute. Flexible array members annotated with __counted_by can have
their accesses bounds-checked at run-time checking via CONFIG_UBSAN_BOUNDS
(for array indexing) and CONFIG_FORTIFY_SOURCE (for strcpy/memcpy-family
functions).
As found with Coccinelle[1], add __counted_by for struct spmi_pmic_div_clk_cc.
[1] https://github.com/kees/kernel-tools/blob/trunk/coccinelle/examples/counted_by.cocci
Cc: Bjorn Andersson <andersson@kernel.org>
Cc: Andy Gross <agross@kernel.org>
Cc: Konrad Dybcio <konrad.dybcio@linaro.org>
Cc: Michael Turquette <mturquette@baylibre.com>
Cc: Stephen Boyd <sboyd@kernel.org>
Cc: linux-arm-msm@vger.kernel.org
Cc: linux-clk@vger.kernel.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20230817202941.never.657-kees@kernel.org
Reviewed-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Prepare for the coming implementation by GCC and Clang of the __counted_by
attribute. Flexible array members annotated with __counted_by can have
their accesses bounds-checked at run-time checking via CONFIG_UBSAN_BOUNDS
(for array indexing) and CONFIG_FORTIFY_SOURCE (for strcpy/memcpy-family
functions).
As found with Coccinelle[1], add __counted_by for struct clk_hw_onecell_data.
Additionally, since the element count member must be set before accessing
the annotated flexible array member, move its initialization earlier.
[1] https://github.com/kees/kernel-tools/blob/trunk/coccinelle/examples/counted_by.cocci
Cc: Michael Turquette <mturquette@baylibre.com>
Cc: Stephen Boyd <sboyd@kernel.org>
Cc: Joel Stanley <joel@jms.id.au>
Cc: Andrew Jeffery <andrew@aj.id.au>
Cc: Taichi Sugaya <sugaya.taichi@socionext.com>
Cc: Takao Orito <orito.takao@socionext.com>
Cc: Qin Jian <qinjian@cqplus1.com>
Cc: Andrew Lunn <andrew@lunn.ch>
Cc: Gregory Clement <gregory.clement@bootlin.com>
Cc: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Cc: Andy Gross <agross@kernel.org>
Cc: Bjorn Andersson <andersson@kernel.org>
Cc: Konrad Dybcio <konrad.dybcio@linaro.org>
Cc: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Cc: Matthias Brugger <matthias.bgg@gmail.com>
Cc: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: Chen-Yu Tsai <wens@csie.org>
Cc: Jernej Skrabec <jernej.skrabec@gmail.com>
Cc: David Airlie <airlied@gmail.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Samuel Holland <samuel@sholland.org>
Cc: Vinod Koul <vkoul@kernel.org>
Cc: Kishon Vijay Abraham I <kishon@kernel.org>
Cc: linux-clk@vger.kernel.org
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-aspeed@lists.ozlabs.org
Cc: linux-arm-msm@vger.kernel.org
Cc: linux-mediatek@lists.infradead.org
Cc: dri-devel@lists.freedesktop.org
Cc: linux-sunxi@lists.linux.dev
Cc: linux-phy@lists.infradead.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20230817203019.never.795-kees@kernel.org
Reviewed-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Support for the Global Clock Controller in IPQ5018 is added.
The SMD RPM driver is cleaned up, with interconnect bus clocks moved out
to the interconnect drivers. Due to being tangled with the related
interconnect updates, the topic branch with interconnect patches was
merged in as well.
Various bugs in PM runtime integration is fixes across many platforms.
The MSM8996 core bus framework gains support for MSM8996 Pro.
MDM9615 is transitioned to parent_hw and parent_data, with related
cleanups. With this the cxo proxy clock is dropped from the driver. And
LCC support for MDM9615 is merged into the MSM8960 driver, to avoid
duplication.
Network-related resets are added on IPQ4019
A couple of missing USB-related clocks are added for IPQ9574.
The missing gpll0_sleep_clk_src is added to MSM8917 global clock
controller.
A few minor fixes for MSM8998 global clock controller.
In the QDU1000 global clock controller GDSCs, clkrefs, and GPLL1 are
added, while PCIe pipe clock, SDCC rcg ops are corrected.
Missing GDSCs are added to SC8280XP global clock controller driver,
flags for existing GDSCs are corrected, by enabling retention and
dropping the always-on flags. Retention is also enabled for the display
clock controller GDSCs.
SDCC apps_clk_src is marked CLK_OPS_PARENT_ENABLE to fix issues with
missing parent clocks across sc7180, sm7150, sm6350 and sm8250, while
sm8450 is corrected to use floor ops.
SM6350 GPU clock controller clock supplies are corrected.
Unwanted clocks from the IPQ5332 GCC are dropped.
The missing OXILICX GDSC is added to MSM8226 GCC.
The delay in the reset controller is transitioned to fsleep() to invoke
the appropriate sleep method depending on duration.
The SM83550 Video clock controller is extended to support SC8280XP.
-----BEGIN PGP SIGNATURE-----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=b1zW
-----END PGP SIGNATURE-----
Merge tag 'qcom-clk-for-6.6' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into clk-qcom
Pull Qualcomm clk driver updates from Bjorn Andersson:
- Support for the Global Clock Controller in IPQ5018 is added.
- The SMD RPM driver is cleaned up, with interconnect bus clocks moved
out to the interconnect drivers. Due to being tangled with the
related interconnect updates, the topic branch with interconnect
patches was merged in as well.
- Various bugs in PM runtime integration is fixes across many platforms.
- The MSM8996 core bus framework gains support for MSM8996 Pro.
- MDM9615 is transitioned to parent_hw and parent_data, with related
cleanups. With this the cxo proxy clock is dropped from the driver.
And LCC support for MDM9615 is merged into the MSM8960 driver, to
avoid duplication.
- Network-related resets are added on IPQ4019
- A couple of missing USB-related clocks are added for IPQ9574
- The missing gpll0_sleep_clk_src is added to MSM8917 global clock
controller
- A few minor fixes for MSM8998 global clock controller.
- In the QDU1000 global clock controller GDSCs, clkrefs, and GPLL1 are
added, while PCIe pipe clock, SDCC rcg ops are corrected.
- Missing GDSCs are added to SC8280XP global clock controller driver,
flags for existing GDSCs are corrected, by enabling retention and
dropping the always-on flags. Retention is also enabled for the
display clock controller GDSCs.
- SDCC apps_clk_src is marked CLK_OPS_PARENT_ENABLE to fix issues with
missing parent clocks across sc7180, sm7150, sm6350 and sm8250, while
sm8450 is corrected to use floor ops.
- SM6350 GPU clock controller clock supplies are corrected.
- Unwanted clocks from the IPQ5332 GCC are dropped.
- The missing OXILICX GDSC is added to MSM8226 GCC.
- The delay in the reset controller is transitioned to fsleep() to
invoke the appropriate sleep method depending on duration.
- The SM83550 Video clock controller is extended to support SC8280XP.
* tag 'qcom-clk-for-6.6' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (86 commits)
clk: qcom: smd-rpm: Set XO rate and CLK_IS_CRITICAL on PCNoC
clk: qcom: smd-rpm: Add a way to define bus clocks with rate and flags
clk: qcom: gcc-ipq5018: change some variable static
clk: qcom: gcc-ipq4019: add missing networking resets
dt-bindings: clock: qcom: ipq4019: add missing networking resets
clk: qcom: gcc-msm8917: Enable GPLL0_SLEEP_CLK_SRC
dt-bindings: clock: gcc-msm8917: Add definition for GPLL0_SLEEP_CLK_SRC
clk: qcom: gcc-qdu1000: Update the RCGs ops
clk: qcom: gcc-qdu1000: Update the SDCC clock RCG ops
clk: qcom: gcc-qdu1000: Add support for GDSCs
clk: qcom: gcc-qdu1000: Add gcc_ddrss_ecpri_gsi_clk support
clk: qcom: gcc-qdu1000: Register gcc_gpll1_out_even clock
clk: qcom: gcc-qdu1000: Fix clkref clocks handling
clk: qcom: gcc-qdu1000: Fix gcc_pcie_0_pipe_clk_src clock handling
dt-bindings: clock: Update GCC clocks for QDU1000 and QRU1000 SoCs
clk: qcom: gcc-sm8450: Use floor ops for SDCC RCGs
clk: qcom: ipq5332: drop the gcc_apss_axi_clk_src clock
clk: qcom: ipq5332: drop the mem noc clocks
clk: qcom: gcc-msm8998: Don't check halt bit on some branch clks
clk: qcom: gpucc-msm8998: Use the correct GPLL0 leg with old DTs
...
The device_get_match_data(), is to get match data for firmware interfaces
such as just OF/ACPI. This driver has I2C matching table as well. Use
i2c_get_match_data() to get match data for I2C, ACPI and DT-based
matching.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20230721070019.96627-3-biju.das.jz@bp.renesas.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
The device_get_match_data(), is to get match data for firmware interfaces
such as just OF/ACPI. This driver has I2C matching table as well. Use
i2c_get_match_data() to get match data for I2C, ACPI and DT-based
matching.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20230721070019.96627-2-biju.das.jz@bp.renesas.com
Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Remove from the bindings the #defines with number of clocks supported by
each clock controller driver. This number can vary, e.g. when we
implement more clocks in the driver. Having the number in the bindings
prevents changing it. Instead, this should be just a #define inside the
driver.
-----BEGIN PGP SIGNATURE-----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=2C3k
-----END PGP SIGNATURE-----
Merge tag 'samsung-clk-6.6' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into clk-samsung
Pull Samsung SoC clock drivers changes from Krzysztof Kozlowski:
Remove from the bindings the #defines with number of clocks supported by
each clock controller driver. This number can vary, e.g. when we
implement more clocks in the driver. Having the number in the bindings
prevents changing it. Instead, this should be just a #define inside the
driver.
* tag 'samsung-clk-6.6' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
dt-bindings: clock: samsung: remove define with number of clocks
clk: samsung: exynoautov9: do not define number of clocks in bindings
clk: samsung: exynos850: do not define number of clocks in bindings
clk: samsung: exynos7885: do not define number of clocks in bindings
clk: samsung: exynos5433: do not define number of clocks in bindings
clk: samsung: exynos5420: do not define number of clocks in bindings
clk: samsung: exynos5410: do not define number of clocks in bindings
clk: samsung: exynos5260: do not define number of clocks in bindings
clk: samsung: exynos5250: do not define number of clocks in bindings
clk: samsung: exynos4: do not define number of clocks in bindings
clk: samsung: exynos3250: do not define number of clocks in bindings
- Add the PDM IPC clock for i.MX93
- Add 519.75MHz frequency support for i.MX9 PLL
- Simplify the .determine_rate() for GPR mux
- Make the i.MX8QXP LPCG clock use devm_platform_ioremap_resource
- Add the audio mux clock to i.MX8
- Fix the SPLL2 MULT range for PLLv4
- Update the SPLL2 type in i.MX8ULP
- Fix the SAI4 clock on i.MX8MP
- Add silicon revision print for i.MX25 on clocks init
- Drop the return value from __mx25_clocks_init
- Fix the clock pauses on no-op set_rate for i.MX8M composite clock
- Drop restrictions for PLL14xx and fix its max prediv value
- Drop the 393216000 and 361267200 from PLL14xx rate table to allow
glitch free switching
-----BEGIN PGP SIGNATURE-----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=RcQs
-----END PGP SIGNATURE-----
Merge tag 'clk-imx-6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/abelvesa/linux into clk-imx
Pull i.MX clk driver updates from Abel Vesa:
- Add the PDM IPC clock for i.MX93
- Add 519.75MHz frequency support for i.MX9 PLL
- Simplify the .determine_rate() for GPR mux
- Make the i.MX8QXP LPCG clock use devm_platform_ioremap_resource
- Add the audio mux clock to i.MX8
- Fix the SPLL2 MULT range for PLLv4
- Update the SPLL2 type in i.MX8ULP
- Fix the SAI4 clock on i.MX8MP
- Add silicon revision print for i.MX25 on clocks init
- Drop the return value from __mx25_clocks_init
- Fix the clock pauses on no-op set_rate for i.MX8M composite clock
- Drop restrictions for PLL14xx and fix its max prediv value
- Drop the 393216000 and 361267200 from PLL14xx rate table to allow
glitch free switching
* tag 'clk-imx-6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/abelvesa/linux:
clk: imx: pll14xx: dynamically configure PLL for 393216000/361267200Hz
clk: imx: pll14xx: align pdiv with reference manual
clk: imx: composite-8m: fix clock pauses when set_rate would be a no-op
clk: imx25: make __mx25_clocks_init return void
clk: imx25: print silicon revision during init
dt-bindings: clocks: imx8mp: make sai4 a dummy clock
clk: imx8mp: fix sai4 clock
clk: imx: imx8ulp: update SPLL2 type
clk: imx: pllv4: Fix SPLL2 MULT range
clk: imx: imx8: add audio clock mux driver
dt-bindings: clock: fsl,imx8-acm: Add audio clock mux support
clk: imx: clk-imx8qxp-lpcg: Convert to devm_platform_ioremap_resource()
clk: imx: clk-gpr-mux: Simplify .determine_rate()
clk: imx: Add 519.75MHz frequency support for imx9 pll
clk: imx93: Add PDM IPG clk
dt-bindings: clock: imx93: Add PDM IPG clk
present before.
0#
-----BEGIN PGP SIGNATURE-----
iQFEBAABCAAuFiEE7v+35S2Q1vLNA3Lx86Z5yZzRHYEFAmTdRuoQHGhlaWtvQHNu
dGVjaC5kZQAKCRDzpnnJnNEdgU8KB/9tW+UHYKEY/P/PjQqSrOfHhqF2eZ4Exs7T
n2CQtnYgtQfo55WzkbPcfM1GQqAYCk0RnbPPTZ+f+dQrB8wo158fPFgCNLPH+Lhh
m+VlQ6tofesAP2anZEotRQkEVjro/vsOw2KVr4NfkeMVq8Phtq1Lo601qe0Ruasb
Jxwskhpbq6gScaFYSptOjw9erc9kM2ktiC8k3tfqd4qY7M2vDm2+TSDLaeGFQLEZ
iehoLcvtR8hfZNP5qQ2JOaTSQFMOSUnMO2MK1PmtCi2vD9uA2o/HoMf8oN2MQuOT
1OChi5l7JLU7981IxR1+FWj8G0fYCTIsuTTpiBVW4Rt2EWrQGVsh
=LWZI
-----END PGP SIGNATURE-----
Merge tag 'v6.6-rockchip-clk1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into clk-rockchip
Pull Rockchip clk driver updates from Heiko Stuebner:
- PLL rates for rk3568 and the display clock tree for rv1126 which wasn't present before
* tag 'v6.6-rockchip-clk1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
clk: rockchip: rv1126: Add PD_VO clock tree
clk: rockchip: rk3568: Fix PLL rate setting for 78.75MHz
clk: rockchip: rk3568: Add PLL rate for 101MHz
On all supported SoCs to date, the PCNoC (a.k.a CNoC_PERIPH) clock must
be always-on as long as the APSS is online and only has to run
at 19.2 MHz. Define it to be as such in the ACTIVE domain.
Some SoCs use that clock for bus scaling, while others just need it for
reaching the hardware. This commit will hurt neither.
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230731-topic-pcnoc-v1-2-452dd36d11d7@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Some clocks, at least PCNoC (a.k.a CNoC_PERIPH) need to be always on,
at least on the ACTIVE side, regardless of whether they're used for bus
scaling or not.
Introduce a new macro to preset non-INT_MAX rates and clk flags to make
it easy and work implicitly through the CCF.
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230731-topic-pcnoc-v1-1-452dd36d11d7@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
lpass_axim_clk_src and lpass_sway_clk_src are only
used in gcc-ipq5018.c now, change them to static.
Fixes: e3fdbef1ba ("clk: qcom: Add Global Clock controller (GCC) driver for IPQ5018")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230816080113.1222352-1-yangyingliang@huawei.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
IPQ4019 has more networking related resets that will be required for future
wired networking support, so lets add them.
Signed-off-by: Robert Marko <robert.marko@sartura.hr>
Link: https://lore.kernel.org/r/20230814104119.96858-2-robert.marko@sartura.hr
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Add bindings for the missing networking resets found in IPQ4019 GCC.
Signed-off-by: Robert Marko <robert.marko@sartura.hr>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230814104119.96858-1-robert.marko@sartura.hr
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Number of clocks supported by Linux drivers might vary - sometimes we
add new clocks, not exposed previously. Therefore these numbers of
clocks should not be in the bindings, as that prevents changing them.
Remove it entirely from the bindings, once Linux drivers stopped using
them.
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Sam Protsenko <semen.protsenko@linaro.org>
Reviewed-by: Alim Akhtar <alim.akhtar@samsung.com>
Reviewed-by: Chanwoo Choi <cw00.choi@samsung.com>
Link: https://lore.kernel.org/r/20230808082738.122804-12-krzysztof.kozlowski@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Number of clocks supported by Linux drivers might vary - sometimes we
add new clocks, not exposed previously. Therefore these numbers of
clocks should not be in the bindings, as that prevents changing them.
Define number of clocks per each clock controller inside the driver
directly.
Reviewed-by: Alim Akhtar <alim.akhtar@samsung.com>
Reviewed-by: Chanwoo Choi <cw00.choi@samsung.com>
Link: https://lore.kernel.org/r/20230808082738.122804-11-krzysztof.kozlowski@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Number of clocks supported by Linux drivers might vary - sometimes we
add new clocks, not exposed previously. Therefore these numbers of
clocks should not be in the bindings, as that prevents changing them.
Define number of clocks per each clock controller inside the driver
directly.
Reviewed-by: Sam Protsenko <semen.protsenko@linaro.org>
Reviewed-by: Alim Akhtar <alim.akhtar@samsung.com>
Reviewed-by: Chanwoo Choi <cw00.choi@samsung.com>
Link: https://lore.kernel.org/r/20230808082738.122804-10-krzysztof.kozlowski@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Number of clocks supported by Linux drivers might vary - sometimes we
add new clocks, not exposed previously. Therefore these numbers of
clocks should not be in the bindings, as that prevents changing them.
Define number of clocks per each clock controller inside the driver
directly.
Reviewed-by: Alim Akhtar <alim.akhtar@samsung.com>
Reviewed-by: Chanwoo Choi <cw00.choi@samsung.com>
Link: https://lore.kernel.org/r/20230808082738.122804-9-krzysztof.kozlowski@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Number of clocks supported by Linux drivers might vary - sometimes we
add new clocks, not exposed previously. Therefore these numbers of
clocks should not be in the bindings, as that prevents changing them.
Define number of clocks per each clock controller inside the driver
directly.
Reviewed-by: Alim Akhtar <alim.akhtar@samsung.com>
Reviewed-by: Chanwoo Choi <cw00.choi@samsung.com>
Link: https://lore.kernel.org/r/20230808082738.122804-8-krzysztof.kozlowski@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Number of clocks supported by Linux drivers might vary - sometimes we
add new clocks, not exposed previously. Therefore these numbers of
clocks should not be in the bindings, as that prevents changing them.
Define number of clocks per each clock controller inside the driver
directly.
Reviewed-by: Alim Akhtar <alim.akhtar@samsung.com>
Reviewed-by: Chanwoo Choi <cw00.choi@samsung.com>
Link: https://lore.kernel.org/r/20230808082738.122804-7-krzysztof.kozlowski@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Number of clocks supported by Linux drivers might vary - sometimes we
add new clocks, not exposed previously. Therefore these numbers of
clocks should not be in the bindings, as that prevents changing them.
Define number of clocks per each clock controller inside the driver
directly.
Reviewed-by: Alim Akhtar <alim.akhtar@samsung.com>
Reviewed-by: Chanwoo Choi <cw00.choi@samsung.com>
Link: https://lore.kernel.org/r/20230808082738.122804-6-krzysztof.kozlowski@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Number of clocks supported by Linux drivers might vary - sometimes we
add new clocks, not exposed previously. Therefore these numbers of
clocks should not be in the bindings, as that prevents changing them.
Define number of clocks per each clock controller inside the driver
directly.
Reviewed-by: Alim Akhtar <alim.akhtar@samsung.com>
Reviewed-by: Chanwoo Choi <cw00.choi@samsung.com>
Link: https://lore.kernel.org/r/20230808082738.122804-5-krzysztof.kozlowski@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Number of clocks supported by Linux drivers might vary - sometimes we
add new clocks, not exposed previously. Therefore these numbers of
clocks should not be in the bindings, as that prevents changing them.
Define number of clocks per each clock controller inside the driver
directly.
Reviewed-by: Alim Akhtar <alim.akhtar@samsung.com>
Reviewed-by: Chanwoo Choi <cw00.choi@samsung.com>
Link: https://lore.kernel.org/r/20230808082738.122804-4-krzysztof.kozlowski@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Number of clocks supported by Linux drivers might vary - sometimes we
add new clocks, not exposed previously. Therefore these numbers of
clocks should not be in the bindings, as that prevents changing them.
Define number of clocks per each clock controller inside the driver
directly.
Reviewed-by: Alim Akhtar <alim.akhtar@samsung.com>
Reviewed-by: Chanwoo Choi <cw00.choi@samsung.com>
Link: https://lore.kernel.org/r/20230808082738.122804-3-krzysztof.kozlowski@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
