[ Upstream commit cae9cdbcd9 ]
The on_treeview2_cursor_changed() handler is connected to both the left
and right tree views, but it hardcodes model2 (the GtkTreeModel of the
right tree view). This is incorrect. Get the associated model from the
view.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ec50ec378e ]
During BMC firmware upgrades on live systems, the ipmi_msghandler
generates excessive "BMC returned incorrect response" warnings
while the BMC is temporarily offline. This can flood system logs
in large deployments.
Replace dev_warn() with dev_warn_ratelimited() to throttle these
warnings and prevent log spam during BMC maintenance operations.
Signed-off-by: Breno Leitao <leitao@debian.org>
Message-ID: <20250710-ipmi_ratelimit-v1-1-6d417015ebe9@debian.org>
Signed-off-by: Corey Minyard <corey@minyard.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b306019848 ]
MLX cap pg_track_log_max_msg_size consists of 5 bits, value of which is
used as power of 2 for max_msg_size. This can lead to multiplication
overflow between max_msg_size (u32) and integer constant, and afterwards
incorrect value is being written to rq_size.
Fix this issue by extending integer constant to u64 type.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Suggested-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Artem Sadovnikov <a.sadovnikov@ispras.ru>
Reviewed-by: Yishai Hadas <yishaih@nvidia.com>
Link: https://lore.kernel.org/r/20250701144017.2410-2-a.sadovnikov@ispras.ru
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit dafeaf2c03 ]
When PCI_IRQ_AFFINITY is set for calling pci_alloc_irq_vectors(), it
means interrupts are spread around the available CPUs. It also means that
the interrupts become managed, which means that an interrupt is shutdown
when all the CPUs in the interrupt affinity mask go offline.
Using managed interrupts in this way means that we should ensure that
completions should not occur on HW queues where the associated interrupt
is shutdown. This is typically achieved by ensuring only CPUs which are
online can generate IO completion traffic to the HW queue which they are
mapped to (so that they can also serve completion interrupts for that HW
queue).
The problem in the driver is that a CPU can generate completions to a HW
queue whose interrupt may be shutdown, as the CPUs in the HW queue
interrupt affinity mask may be offline. This can cause IOs to never
complete and hang the system. The driver maintains its own CPU <-> HW
queue mapping for submissions, see aac_fib_vector_assign(), but this does
not reflect the CPU <-> HW queue interrupt affinity mapping.
Commit 9dc704dcc0 ("scsi: aacraid: Reply queue mapping to CPUs based on
IRQ affinity") tried to remedy this issue may mapping CPUs properly to HW
queue interrupts. However this was later reverted in commit c5becf57dd
("Revert "scsi: aacraid: Reply queue mapping to CPUs based on IRQ
affinity") - it seems that there were other reports of hangs. I guess
that this was due to some implementation issue in the original commit or
maybe a HW issue.
Fix the very original hang by just not using managed interrupts by not
setting PCI_IRQ_AFFINITY. In this way, all CPUs will be in each HW queue
affinity mask, so should not create completion problems if any CPUs go
offline.
Signed-off-by: John Garry <john.g.garry@oracle.com>
Link: https://lore.kernel.org/r/20250715111535.499853-1-john.g.garry@oracle.com
Closes: https://lore.kernel.org/linux-scsi/20250618192427.3845724-1-jmeneghi@redhat.com/
Reviewed-by: John Meneghini <jmeneghi@redhat.com>
Tested-by: John Meneghini <jmeneghi@redhat.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6e0f6aa44b ]
Fix target_parse_pr_out_transport_id() to return a string representing
the transport ID in a human-readable format (e.g., naa.xxxxxxxx...) for
various SCSI protocol types (SAS, FCP, SRP, SBP).
Previously, the function returned a pointer to the raw binary buffer,
which was incorrectly compared against human-readable strings, causing
comparisons to fail. Now, the function writes a properly formatted
string into a buffer provided by the caller. The output format depends
on the transport protocol:
* SAS: 64-bit identifier, "naa." prefix.
* FCP: 64-bit identifier, colon separated values.
* SBP: 64-bit identifier, no prefix.
* SRP: 128-bit identifier, "0x" prefix.
* iSCSI: IQN string.
Signed-off-by: Maurizio Lombardi <mlombard@redhat.com>
Link: https://lore.kernel.org/r/20250714133738.11054-1-mlombard@redhat.com
Reviewed-by: Dmitry Bogdanov <d.bogdanov@yadro.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 37c4e72b06 ]
sas_user_scan() did not fully process wildcard channel scans
(SCAN_WILD_CARD) when a transport-specific user_scan() callback was
present. Only channel 0 would be scanned via user_scan(), while the
remaining channels were skipped, potentially missing devices.
user_scan() invokes updated sas_user_scan() for channel 0, and if
successful, iteratively scans remaining channels (1 to
shost->max_channel) via scsi_scan_host_selected(). This ensures complete
wildcard scanning without affecting transport-specific scanning behavior.
Signed-off-by: Ranjan Kumar <ranjan.kumar@broadcom.com>
Link: https://lore.kernel.org/r/20250624061649.17990-1-ranjan.kumar@broadcom.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f468992936 ]
strncpy() does not guarantee null-termination if the source string is
longer than the destination buffer.
Ensure the buffer is explicitly null-terminated to prevent potential
string overflows or undefined behavior.
Signed-off-by: Shankari Anand <shankari.ak0208@gmail.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Tested-by: Randy Dunlap <rdunlap@infradead.org>
Tested-by: Nicolas Schier <n.schier@avm.de>
Acked-by: Nicolas Schier <n.schier@avm.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b1779e4f20 ]
A large DMA mapping request can loop through dma address pinning for
many pages. In cases where THP can not be used, the repeated vmf_insert_pfn can
be costly, so let the task reschedule as need to prevent CPU stalls. Failure to
do so has potential harmful side effects, like increased memory pressure
as unrelated rcu tasks are unable to make their reclaim callbacks and
result in OOM conditions.
rcu: INFO: rcu_sched self-detected stall on CPU
rcu: 36-....: (20999 ticks this GP) idle=b01c/1/0x4000000000000000 softirq=35839/35839 fqs=3538
rcu: hardirqs softirqs csw/system
rcu: number: 0 107 0
rcu: cputime: 50 0 10446 ==> 10556(ms)
rcu: (t=21075 jiffies g=377761 q=204059 ncpus=384)
...
<TASK>
? asm_sysvec_apic_timer_interrupt+0x16/0x20
? walk_system_ram_range+0x63/0x120
? walk_system_ram_range+0x46/0x120
? pgprot_writethrough+0x20/0x20
lookup_memtype+0x67/0xf0
track_pfn_insert+0x20/0x40
vmf_insert_pfn_prot+0x88/0x140
vfio_pci_mmap_huge_fault+0xf9/0x1b0 [vfio_pci_core]
__do_fault+0x28/0x1b0
handle_mm_fault+0xef1/0x2560
fixup_user_fault+0xf5/0x270
vaddr_get_pfns+0x169/0x2f0 [vfio_iommu_type1]
vfio_pin_pages_remote+0x162/0x8e0 [vfio_iommu_type1]
vfio_iommu_type1_ioctl+0x1121/0x1810 [vfio_iommu_type1]
? futex_wake+0x1c1/0x260
x64_sys_call+0x234/0x17a0
do_syscall_64+0x63/0x130
? exc_page_fault+0x63/0x130
entry_SYSCALL_64_after_hwframe+0x4b/0x53
Signed-off-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Paul E. McKenney <paulmck@kernel.org>
Link: https://lore.kernel.org/r/20250715184622.3561598-1-kbusch@meta.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5ac726653a ]
strcpy() performs no bounds checking and can lead to buffer overflows if
the input string exceeds the destination buffer size. This patch replaces
it with strncpy(), and null terminates the input string.
Signed-off-by: Suchit Karunakaran <suchitkarunakaran@gmail.com>
Reviewed-by: Nicolas Schier <nicolas.schier@linux.dev>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 571c1ea91a ]
If a console printer is interrupted during panic, it will never
be able to reacquire ownership in order to perform and cleanup.
That in itself is not a problem, since the non-panic CPU will
simply quiesce in an endless loop within nbcon_reacquire_nobuf().
However, in this state, platforms that do not support a true NMI
to interrupt the quiesced CPU will not be able to shutdown that
CPU from within panic(). This then causes problems for such as
being unable to load and run a kdump kernel.
Fix this by allowing non-panic CPUs to reacquire ownership using
a direct acquire. Then the non-panic CPUs can successfullyl exit
the nbcon_reacquire_nobuf() loop and the console driver can
perform any necessary cleanup. But more importantly, the CPU is
no longer quiesced and is free to process any interrupts
necessary for panic() to shutdown the CPU.
All other forms of acquire are still not allowed for non-panic
CPUs since it is safer to have them avoid gaining console
ownership that is not strictly necessary.
Reported-by: Michael Kelley <mhklinux@outlook.com>
Closes: https://lore.kernel.org/r/SN6PR02MB4157A4C5E8CB219A75263A17D46DA@SN6PR02MB4157.namprd02.prod.outlook.com
Signed-off-by: John Ogness <john.ogness@linutronix.de>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Tested-by: Michael Kelley <mhklinux@outlook.com>
Link: https://patch.msgid.link/20250606185549.900611-1-john.ogness@linutronix.de
Signed-off-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e23ab8028d ]
Let's return errors caught by the generic checks. This fixes generic/494 where
it expects to see EBUSY by setattr_prepare instead of EINVAL by f2fs for active
swapfile.
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 99f9a97dce ]
An infinite loop may occur if the following conditions occur due to
file system corruption.
(1) Condition for exfat_count_dir_entries() to loop infinitely.
- The cluster chain includes a loop.
- There is no UNUSED entry in the cluster chain.
(2) Condition for exfat_create_upcase_table() to loop infinitely.
- The cluster chain of the root directory includes a loop.
- There are no UNUSED entry and up-case table entry in the cluster
chain of the root directory.
(3) Condition for exfat_load_bitmap() to loop infinitely.
- The cluster chain of the root directory includes a loop.
- There are no UNUSED entry and bitmap entry in the cluster chain
of the root directory.
(4) Condition for exfat_find_dir_entry() to loop infinitely.
- The cluster chain includes a loop.
- The unused directory entries were exhausted by some operation.
(5) Condition for exfat_check_dir_empty() to loop infinitely.
- The cluster chain includes a loop.
- The unused directory entries were exhausted by some operation.
- All files and sub-directories under the directory are deleted.
This commit adds checks to break the above infinite loop.
Signed-off-by: Yuezhang Mo <Yuezhang.Mo@sony.com>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0b7c9528fa ]
This patch fixes an issue where the touchpad cursor movement becomes
slow on the Dell Precision 5560. Force the touchpad freq to 100khz
as a workaround.
Tested on Dell Precision 5560 with 6.14 to 6.14.6. Cursor movement
is now smooth and responsive.
Signed-off-by: fangzhong.zhou <myth5@myth5.com>
[wsa: kept sorting and removed unnecessary parts from commit msg]
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a9eb185be8 ]
x_table_lookup currently does stacking during label_parse() if the
target specifies a stack but its only caller ensures that it will
never be used with stacking.
Refactor to slightly simplify the code in x_to_label(), this
also fixes a long standing problem where x_to_labels check on stacking
is only on the first element to the table option list, instead of
the element that is found and used.
Signed-off-by: John Johansen <john.johansen@canonical.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8ca719b819 ]
Due to the semantics of iterate_devices(), the current code allows a
request-based dm table as long as it includes one request-stackable
device. It is supposed to only allow tables where there are no
non-request-stackable devices.
Signed-off-by: Benjamin Marzinski <bmarzins@redhat.com>
Reviewed-by: Mike Snitzer <snitzer@kernel.org>
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 447270cdb4 ]
'I3C_BCR_HDR_CAP' is still spec v1.0 and has been renamed to 'advanced
capabilities' in v1.1 onwards. The ST pressure sensor LPS22DF does not
have HDR, but has the 'advanced cap' bit set. The core still wants to
get additional information using the CCC 'GETHDRCAP' (or GETCAPS in v1.1
onwards). Not all controllers support this CCC and will notify the upper
layers about it. For instantiating the device, we can ignore this
unsupported CCC as standard communication will work. Without this patch,
the device will not be instantiated at all.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://lore.kernel.org/r/20250704204524.6124-1-wsa+renesas@sang-engineering.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c5bf96d20f ]
When using AppArmor profiles inside an unprivileged container,
the link operation observes an unshifted ouid.
(tested with LXD and Incus)
For example, root inside container and uid 1000000 outside, with
`owner /root/link l,` profile entry for ln:
/root$ touch chain && ln chain link
==> dmesg
apparmor="DENIED" operation="link" class="file"
namespace="root//lxd-feet_<var-snap-lxd-common-lxd>" profile="linkit"
name="/root/link" pid=1655 comm="ln" requested_mask="l" denied_mask="l"
fsuid=1000000 ouid=0 [<== should be 1000000] target="/root/chain"
Fix by mapping inode uid of old_dentry in aa_path_link() rather than
using it directly, similarly to how it's mapped in __file_path_perm()
later in the file.
Signed-off-by: Gabriel Totev <gabriel.totev@zetier.com>
Signed-off-by: John Johansen <john.johansen@canonical.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 523923cfd5 ]
In using CONFIG_RTC_HCTOSYS, rtc_hctosys() will sync the RTC time to the
kernel time as long as rtc_read_time() succeeds. In some power loss
situations, our supercapacitor-backed DS1342 RTC comes up with either an
unpredictable future time or the default 01/01/00 from the datasheet.
The oscillator stop flag (OSF) is set in these scenarios due to the
power loss and can be used to determine the validity of the RTC data.
This change expands the oscillator stop flag (OSF) handling that has
already been implemented for some chips to the ds1341 chip (DS1341 and
DS1342 share a datasheet). This handling manages the validity of the RTC
data in .read_time and .set_time based on the OSF.
Signed-off-by: Meagan Lloyd <meaganlloyd@linux.microsoft.com>
Reviewed-by: Tyler Hicks <code@tyhicks.com>
Acked-by: Rodolfo Giometti <giometti@enneenne.com>
Link: https://lore.kernel.org/r/1749665656-30108-3-git-send-email-meaganlloyd@linux.microsoft.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3b661ca549 ]
LKP found a random config which failed to build because IO accessors
were not defined:
In file included from drivers/i3c/master.c:21:
drivers/i3c/internals.h: In function 'i3c_writel_fifo':
>> drivers/i3c/internals.h:35:9: error: implicit declaration of function 'writesl' [-Werror=implicit-function-declaration]
Add the proper header to where the IO accessors are used.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202507150208.BZDzzJ5E-lkp@intel.com/
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://lore.kernel.org/r/20250717120046.9022-2-wsa+renesas@sang-engineering.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a6323bd4e6 ]
Passing a module name longer than MODULE_NAME_LEN to the delete_module
syscall results in its silent truncation. This really isn't much of
a problem in practice, but it could theoretically lead to the removal of an
incorrect module. It is more sensible to return ENAMETOOLONG or ENOENT in
such a case.
Update the syscall to return ENOENT, as documented in the delete_module(2)
man page to mean "No module by that name exists." This is appropriate
because a module with a name longer than MODULE_NAME_LEN cannot be loaded
in the first place.
Signed-off-by: Petr Pavlu <petr.pavlu@suse.com>
Reviewed-by: Daniel Gomez <da.gomez@samsung.com>
Link: https://lore.kernel.org/r/20250630143535.267745-2-petr.pavlu@suse.com
Signed-off-by: Daniel Gomez <da.gomez@samsung.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 487767bff5 ]
Fix Smatch-detected error:
drivers/md/dm-zoned-target.c:1073 dmz_iterate_devices()
error: uninitialized symbol 'r'.
Smatch detects a possible use of the uninitialized variable 'r' in
dmz_iterate_devices() because if dmz->nr_ddevs is zero, the loop is
skipped and 'r' is returned without being set, leading to undefined
behavior.
Initialize 'r' to 0 before the loop. This ensures that if there are no
devices to iterate over, the function still returns a defined value.
Signed-off-by: Purva Yeshi <purvayeshi550@gmail.com>
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ccb7bb13c0 ]
The sdw_dev_lock protects the SoundWire driver callbacks against
the probed flag, which is used to skip the callbacks if the
driver gets removed. For more information see commit bd29c00edd
("soundwire: revisit driver bind/unbind and callbacks").
However, this lock is a frequent source of mutex inversions.
Many audio operations eventually hit the hardware resulting in a
SoundWire callback, this means that typically the driver has the
locking order ALSA/ASoC locks -> sdw_dev_lock. Conversely, the IRQ
comes in directly from the SoundWire hardware, but then will often
want to access ALSA/ASoC, such as updating something in DAPM or
an ALSA control. This gives the other lock order sdw_dev_lock ->
ALSA/ASoC locks.
When the IRQ handling was initially added to SoundWire this was
through a callback mechanism. As such it required being covered by
the lock because the callbacks are part of the sdw_driver structure
and are thus present regardless of if the driver is currently
probed.
Since then a newer mechanism using the IRQ framework has been
added, which is currently covered by the same lock but this isn't
actually required. Handlers for the IRQ framework are registered in
probe and should by released during remove, thus the IRQ framework
will have already unbound the IRQ before the slave driver is
removed. Avoid the aforementioned mutex inversion by moving the
handle_nested_irq call outside of the sdw_dev_lock.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20250609143041.495049-3-ckeepax@opensource.cirrus.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0383734179 ]
During pm_prepare callback, pm_request_resume() delays SoundWire manager D0
entry sequence. Synchronize runtime resume sequence for amd_manager
instance prior to invoking child devices resume sequence for both the amd
power modes(ClockStop Mode and Power off mode).
Change the power_mode_mask check and use pm_runtime_resume() in
amd_pm_prepare() callback.
Signed-off-by: Vijendar Mukunda <Vijendar.Mukunda@amd.com>
Link: https://lore.kernel.org/r/20250530054447.1645807-3-Vijendar.Mukunda@amd.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2f96afdffa ]
Since the sibling data is filled after the priv->clks[] array entry is
populated, the first clock that is probed and has a sibling will
temporarily behave as its own sibling until its actual sibling is
populated. To avoid any issues, postpone updating priv->clks[] until after
the sibling is populated.
Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/20250514090415.4098534-2-claudiu.beznea.uj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit aaeff14688 ]
The bootloader info reg for pspv6 is the same as pspv4 and pspv5.
Suggested-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9764401bf6 ]
Some broken device return wrong dwMaxPayloadTransferSize fields as
follows:
[ 218.632537] uvcvideo: Device requested 2752512 B/frame bandwidth.
[ 218.632598] uvcvideo: No fast enough alt setting for requested bandwidth.
When dwMaxPayloadTransferSize is greater than maxpsize, it will prevent
the camera from starting. So use the bandwidth of maxpsize.
Signed-off-by: chenchangcheng <chenchangcheng@kylinos.cn>
Reviewed-by: Ricardo Ribalda <ribalda@chromium.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://lore.kernel.org/r/20250510061803.811433-1-ccc194101@163.com
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ed0234c845 ]
In w7090p_tuner_write_serpar, msg is controlled by user. When msg[0].buf is null and msg[0].len is zero, former checks on msg[0].buf would be passed. If accessing msg[0].buf[2] without sanity check, null pointer deref would happen. We add
check on msg[0].len to prevent crash.
Similar commit: commit 0ed554fd76 ("media: dvb-usb: az6027: fix null-ptr-deref in az6027_i2c_xfer()")
Signed-off-by: Alex Guo <alexguo1023@gmail.com>
Link: https://lore.kernel.org/r/20250616013353.738790-1-alexguo1023@gmail.com
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ce5cac69b2 ]
In dib7090p_rw_on_apb, msg is controlled by user. When msg[0].buf is null and
msg[0].len is zero, former checks on msg[0].buf would be passed. If accessing
msg[0].buf[2] without sanity check, null pointer deref would happen. We add
check on msg[0].len to prevent crash. Similar issue occurs when access
msg[1].buf[0] and msg[1].buf[1].
Similar commit: commit 0ed554fd76 ("media: dvb-usb: az6027: fix null-ptr-deref in az6027_i2c_xfer()")
Signed-off-by: Alex Guo <alexguo1023@gmail.com>
Link: https://lore.kernel.org/r/20250616013231.730221-1-alexguo1023@gmail.com
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b5ae5a7982 ]
This driver passes the length of an i2c_msg directly to
usb_control_msg(). If the message is now a read and of length 0, it
violates the USB protocol and a warning will be printed. Enable the
I2C_AQ_NO_ZERO_LEN_READ quirk for this adapter thus forbidding 0-length
read messages altogether.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 86addd2531 ]
The existing fixed value of 16 worked for UYVY 720P60 over
2 lanes at 594MHz, or UYVY 1080P60 over 4 lanes. (RGB888
1080P60 needs 6 lanes at 594MHz).
It doesn't allow for lower resolutions to work as the FIFO
underflows.
374 is required for 1080P24 or 1080P30 UYVY over 2 lanes @
972Mbit/s, but >374 means that the FIFO underflows on 1080P50
UYVY over 2 lanes @ 972Mbit/s.
Whilst it would be nice to compute it, the required information
isn't published by Toshiba.
Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 377cc006a3 ]
When calling tc358743_set_fmt, the code was calling tc358743_get_fmt
to choose a valid format. However that sets the colorspace
based on information read back from the chip, not the colour
format requested.
The result was that if you called try or set format for UYVY
when the current format was RGB3 then you would get told SRGB,
and try RGB3 when current was UYVY and you would get told
SMPTE170M.
The value programmed in the VI_REP register for the colorspace
is always set by this driver, therefore there is no need to read
back the value, and never set to REC709.
Return the colorspace based on the format set/tried instead.
Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 303d81635e ]
The probe for the TC358743 reads the CHIPID register from
the device and compares it to the expected value of 0.
If the I2C request fails then that also returns 0, so
the driver loads thinking that the device is there.
Generally I2C communications are reliable so there is
limited need to check the return value on every transfer,
therefore only amend the one read during probe to check
for I2C errors.
Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4c5cc2f653 ]
Trying to set the affinity of the interrupts associated to stm32
pinctrl results in a write error.
Fill struct irq_chip::irq_set_affinity to use the default helper
function.
Signed-off-by: Cheick Traore <cheick.traore@foss.st.com>
Signed-off-by: Antonio Borneo <antonio.borneo@foss.st.com>
Link: https://lore.kernel.org/20250610143042.295376-3-antonio.borneo@foss.st.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 04caad5a7b ]
With the ATA error model, an NCQ command failure always triggers an abort
(termination) of all NCQ commands queued on the device. In such case, the
SAT or the host must handle the failed command according to the command
sense data and immediately retry all other NCQ commands that were aborted
due to the failed NCQ command.
For SAS HBAs controlled by the mpi3mr driver, NCQ command aborts are not
handled by the HBA SAT and sent back to the host, with an ioc log
information equal to 0x31080000 (IOC_LOGINFO_PREFIX_PL with the PL code
PL_LOGINFO_CODE_SATA_NCQ_FAIL_ALL_CMDS_AFTR_ERR). The function
mpi3mr_process_op_reply_desc() always forces a retry of commands
terminated with the status MPI3_IOCSTATUS_SCSI_IOC_TERMINATED using the
SCSI result DID_SOFT_ERROR, regardless of the ioc_loginfo for the
command. This correctly forces the retry of collateral NCQ abort
commands, but with the retry counter for the command being incremented.
If a command to an ATA device is subject to too many retries due to other
NCQ commands failing (e.g. read commands trying to access unreadable
sectors), the collateral NCQ abort commands may be terminated with an
error as they run out of retries. This violates the SAT specification and
causes hard-to-debug command errors.
Solve this issue by modifying the handling of the
MPI3_IOCSTATUS_SCSI_IOC_TERMINATED status to check if a command is for an
ATA device and if the command ioc_loginfo indicates an NCQ collateral
abort. If that is the case, force the command retry using the SCSI result
DID_IMM_RETRY to avoid incrementing the command retry count.
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Link: https://lore.kernel.org/r/20250606052747.742998-2-dlemoal@kernel.org
Tested-by: Yafang Shao <laoar.shao@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 15592a11d5 ]
With the ATA error model, an NCQ command failure always triggers an abort
(termination) of all NCQ commands queued on the device. In such case, the
SAT or the host must handle the failed command according to the command
sense data and immediately retry all other NCQ commands that were aborted
due to the failed NCQ command.
For SAS HBAs controlled by the mpt3sas driver, NCQ command aborts are not
handled by the HBA SAT and sent back to the host, with an ioc log
information equal to 0x31080000 (IOC_LOGINFO_PREFIX_PL with the PL code
PL_LOGINFO_CODE_SATA_NCQ_FAIL_ALL_CMDS_AFTR_ERR). The function
_scsih_io_done() always forces a retry of commands terminated with the
status MPI2_IOCSTATUS_SCSI_IOC_TERMINATED using the SCSI result
DID_SOFT_ERROR, regardless of the log_info for the command. This
correctly forces the retry of collateral NCQ abort commands, but with the
retry counter for the command being incremented. If a command to an ATA
device is subject to too many retries due to other NCQ commands failing
(e.g. read commands trying to access unreadable sectors), the collateral
NCQ abort commands may be terminated with an error as they run out of
retries. This violates the SAT specification and causes hard-to-debug
command errors.
Solve this issue by modifying the handling of the
MPI2_IOCSTATUS_SCSI_IOC_TERMINATED status to check if a command is for an
ATA device and if the command loginfo indicates an NCQ collateral
abort. If that is the case, force the command retry using the SCSI result
DID_IMM_RETRY to avoid incrementing the command retry count.
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Link: https://lore.kernel.org/r/20250606052747.742998-3-dlemoal@kernel.org
Tested-by: Yafang Shao <laoar.shao@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 202ac22b8e ]
On some Dell XPS 13 (9345) variants, the battery used is lithium-polymer
based. Currently, this is reported as unknown technology due to the entry
missing.
[ 4083.135325] Unknown battery technology 'LIP'
Add another check for lithium-polymer in the technology parsing callback
and return that instead of unknown.
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250523-psy-qcom-battmgr-add-lipo-entry-v1-1-938c20a43a25@linaro.org
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6698796282 ]
If a call to lpfc_sli4_read_rev() from lpfc_sli4_hba_setup() fails, the
resultant cleanup routine lpfc_sli4_vport_delete_fcp_xri_aborted() may
occur before sli4_hba.hdwqs are allocated. This may result in a null
pointer dereference when attempting to take the abts_io_buf_list_lock for
the first hardware queue. Fix by adding a null ptr check on
phba->sli4_hba.hdwq and early return because this situation means there
must have been an error during port initialization.
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Link: https://lore.kernel.org/r/20250618192138.124116-4-justintee8345@gmail.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1cced5779e ]
For SLI3, the HBA_SETUP flag is never set so the lpfc_dev_loss_tmo_callbk
always early returns. Add a phba->sli_rev check for SLI4 mode so that
the SLI3 path can flow through the original dev_loss_tmo worker thread
design to lpfc_dev_loss_tmo_handler instead of early return.
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Link: https://lore.kernel.org/r/20250618192138.124116-9-justintee8345@gmail.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 43163f4c30 ]
In the s390 defconfig, gcc-10 and earlier end up inlining three functions
into nldev_stat_get_doit(), and each of them uses some 600 bytes of stack.
The result is a function with an overly large stack frame and a warning:
drivers/infiniband/core/nldev.c:2466:1: error: the frame size of 1720 bytes is larger than 1280 bytes [-Werror=frame-larger-than=]
Mark the three functions noinline_for_stack to prevent this, ensuring
that only one copy of the nlattr array is on the stack of each function.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://patch.msgid.link/20250620113335.3776965-1-arnd@kernel.org
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 59f7d21385 ]
The function divides number of online CPUs by num_core_siblings, and
later checks the divider by zero. This implies a possibility to get
and divide-by-zero runtime error. Fix it by moving the check prior to
division. This also helps to save one indentation level.
Signed-off-by: Yury Norov [NVIDIA] <yury.norov@gmail.com>
Link: https://patch.msgid.link/20250604193947.11834-3-yury.norov@gmail.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e19bdbaa31 ]
DMA operates in Double Buffer Mode (DBM) when the transfer is cyclic and
there are at least two periods.
When DBM is enabled, the DMA toggles between two memory targets (SxM0AR and
SxM1AR), indicated by the SxSCR.CT bit (Current Target).
There is no need to update the next memory address if two periods are
configured, as SxM0AR and SxM1AR are already properly set up before the
transfer begins in the stm32_dma_start_transfer() function.
This avoids unnecessary updates to SxM0AR/SxM1AR, thereby preventing
potential Transfer Errors. Specifically, when the channel is enabled,
SxM0AR and SxM1AR can only be written if SxSCR.CT=1 and SxSCR.CT=0,
respectively. Otherwise, a Transfer Error interrupt is triggered, and the
stream is automatically disabled.
Signed-off-by: Amelie Delaunay <amelie.delaunay@foss.st.com>
Link: https://lore.kernel.org/r/20250624-stm32_dma_dbm_fix-v1-1-337c40d6c93e@foss.st.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2e84a5e537 ]
mc_subled used for multi_index needs well defined array indexes,
to guarantee the desired result, use reg for that.
If devicetree child nodes is processed in random or reverse order
you may end up with multi_index "blue green red" instead of the expected
"red green blue".
If user space apps uses multi_index to deduce how to control the leds
they would most likely be broken without this patch if devicetree
processing is reversed (which it appears to be).
arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-fuji.dts has reg set
but I don't see how it can have worked without this change.
If reg is not set, an error is returned,
If reg is out of range, an error is returned.
reg within led child nodes starts with 0, to map to the iout in each bank.
Signed-off-by: Johan Adolfsson <johan.adolfsson@axis.com>
Reviewed-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
Link: https://lore.kernel.org/r/20250617-led-fix-v7-1-cdbe8efc88fa@axis.com
Signed-off-by: Lee Jones <lee@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5a0abb8909 ]
When operating a pipeline with a missing V4L2_CID_LINK_FREQ control this
two line warning is printed each time the pipeline is started. Reduce
this excessive logging by only warning once for the missing control.
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Sasha Levin <sashal@kernel.org>
