Add AD4883 compatible string to the AD4080 devicetree binding.
The AD4883 is a dual-channel, 16-bit, 40 MSPS SAR ADC, sharing the same
register map and interface as the AD4080 family. Like the AD4880, it
requires two SPI chip selects and two io-backends for its independent
ADC channels. The AD4883 differs from the AD4880 in resolution (16-bit
vs 20-bit), which requires distinct channel configuration in the driver,
precluding a fallback compatible.
Signed-off-by: Antoniu Miclaus <antoniu.miclaus@analog.com>
Signed-off-by: Jonathan Cameron <jonathan.cameron@oss.qualcomm.com>
Split the logic inside the opt3001_get_processed() function, as the
current flow is hard to read, mixing IRQ and non-IRQ code blocks.
Separate the IRQ code path into its own function, same for the
non-IRQ path.
Suggested-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Joshua Crofts <joshua.crofts1@gmail.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Signed-off-by: Jonathan Cameron <jonathan.cameron@oss.qualcomm.com>
Don't populate the read-only const array config on the stack at run
time, instead make it static.
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Signed-off-by: Jonathan Cameron <jonathan.cameron@oss.qualcomm.com>
Don't populate the read-only const array regulator_names on the stack
at run time, instead make it static const char * const
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Signed-off-by: Jonathan Cameron <jonathan.cameron@oss.qualcomm.com>
Add the compatible for the SARADC of the Rockchip RV1106, which is
compatible with the RK3588 variant.
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Signed-off-by: Jonathan Cameron <jonathan.cameron@oss.qualcomm.com>
Add debugfs register access to the ads112c14 driver. This is a complex
chip and being able to poke registers is useful for debugging and
diagnostic/calibration purposes.
Signed-off-by: David Lechner (TI) <dlechner@baylibre.com>
Signed-off-by: Jonathan Cameron <jonathan.cameron@oss.qualcomm.com>
Add support for parsing devicetree properties for measurement channels
and doing direct reads on these.
There are quite a lot of conditions that have to be met for each
measurement to be made, so quite a bit of state and algorithms are
required to handle it.
Channels are created dynamically since the number of possibilities is
unreasonably large.
Signed-off-by: David Lechner (TI) <dlechner@baylibre.com>
Signed-off-by: Jonathan Cameron <jonathan.cameron@oss.qualcomm.com>
Implement support for the programmable gain amplifier on the internal
short SYS_MON channel. This channel is used for calibration, so it is
useful to be able to set the PGA to the same gain as the external
channels. The gain setting is implemented via the `_scale` attribute.
In the future, we may want to support different reference voltages for
this channel, so the scale_available table is populated during probe
rather than being a static table.
Signed-off-by: David Lechner (TI) <dlechner@baylibre.com>
Signed-off-by: Jonathan Cameron <jonathan.cameron@oss.qualcomm.com>
Add a new driver for the TI ADS112C14/ADS122C14 ADC chips.
This first step is adding a very basic driver that only supports power
on/reset and reading the system monitor channels.
ADS112C14_SYS_MON_CHANNEL_SHORT is the last channel rather than being in
logical order by address to keep the voltage channels together and in
case we find we need to add variants of this channel with different
voltage reference later.
Signed-off-by: David Lechner (TI) <dlechner@baylibre.com>
Signed-off-by: Jonathan Cameron <jonathan.cameron@oss.qualcomm.com>
Add new bindings for ti,ads112c14 and similar devices.
This is an ADC that is primarily intended for use with resistive sensors
(RTD, thermocouple, Wheatstone bridge, etc.). There are a few unusual
properties because of this. In particular, the reference voltage source
and current output requirements can be different for each measurement,
so these are included in the channel bindings.
The REFP/REFN reference voltage is usually just connected to a resistor
that is being driven by the ADC's current outputs, so there is special
property for this case rather than requiring a regulator to be defined
to represent that.
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: David Lechner (TI) <dlechner@baylibre.com>
Signed-off-by: Jonathan Cameron <jonathan.cameron@oss.qualcomm.com>
Add a generic input-chopping property to adc.yaml. This is a feature
seen frequently in ADCs that are designed to measure resistive loads,
such as RTDs and strain gauges. Enabling this can reduce offset errors
by swapping the positive and negative input channels on every other
conversion. This can have side-effects in timing and filter response, so
it is not always desirable to enable this feature in some applications.
Therefore, it is best to make this a property that can be enabled or
disabled in the device tree.
Signed-off-by: David Lechner (TI) <dlechner@baylibre.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Jonathan Cameron <jonathan.cameron@oss.qualcomm.com>
Some ADCs incorporate burn-out current sources that provide current to
the channel's input pins for open-circuit or short-circuit detection.
Signed-off-by: Kurt Borja <kuurtb@gmail.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: David Lechner (TI) <dlechner@baylibre.com>
Signed-off-by: Jonathan Cameron <jonathan.cameron@oss.qualcomm.com>
Some ADCs incorporate current sources that provide excitation current to
resistive temperature devices (RTDs), thermistors, diodes and other
resistive sensors that require constant current biasing.
Signed-off-by: Kurt Borja <kuurtb@gmail.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: David Lechner (TI) <dlechner@baylibre.com>
Signed-off-by: Jonathan Cameron <jonathan.cameron@oss.qualcomm.com>
Some ADCs have configurable voltage reference sources for each channel.
Signed-off-by: Kurt Borja <kuurtb@gmail.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: David Lechner (TI) <dlechner@baylibre.com>
Signed-off-by: Jonathan Cameron <jonathan.cameron@oss.qualcomm.com>
Allow buffer blocks flagged as cyclic to be submitted as repeating DMA
transfers. For cyclic blocks, use DMA_PREP_REPEAT so the engine keeps
replaying the descriptor.
This is useful for output buffers where the same data should be driven
continuously without userspace having to requeue it. Examples include
continuous RF transmit paths replaying a calibration, test or beacon
pattern.
Skip installing the completion callback for cyclic blocks. Since the
transfer is continuously replayed, the callback would fire on every
period, throwing off the block refcount.
Because nothing prevents a new cyclic transfer from replacing an
already active cyclic one, always set DMA_PREP_LOAD_EOT so the engine
correctly terminates the active transfer before loading the new
descriptor.
Limit the DMA buffer queue to one cyclic DMABUF at a time. There is
currently no known use case for queueing multiple cyclic blocks, and
cyclic blocks stay referenced until the buffer is disabled.
Signed-off-by: Nuno Sá <nuno.sa@analog.com>
Signed-off-by: Jonathan Cameron <jonathan.cameron@oss.qualcomm.com>
Replace sprintf() with sysfs_emit() for single-value sysfs show
functions, and use sysfs_emit_at() for lux_table_show() which
concatenates multiple values. This ensures buffer safety and
follows the modern kernel sysfs API.
Signed-off-by: Chengrui Liu <OrangeBlack0765@outlook.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Signed-off-by: Jonathan Cameron <jonathan.cameron@oss.qualcomm.com>
Most of the supported devices rely on a GAIN pin to control a 2x
multiplier applied to the output voltage. Other devices, e.g. the
single-channel ones, provides a gain control through a bit field in
the control register. Some designs might have the GAIN pin hardwired
to VDD/VLOGIC or GND, which would have no "gain-gpios" device property,
being able to set "adi,range-double" if it is hardwired to VDD. The
vref_mv field is moved down in the struct ad5686_state, so that the
overall size increase is reduced.
Reviewed-by: David Lechner <dlechner@baylibre.com>
Signed-off-by: Rodrigo Alencar <rodrigo.alencar@analog.com>
Signed-off-by: Jonathan Cameron <jonathan.cameron@oss.qualcomm.com>
Implement trigger handler by leveraging the LDAC gpio to update all DAC
channels at once when it is available. Also, the multiple channel writes
can be flushed at once with the sync() operation.
Reviewed-by: David Lechner <dlechner@baylibre.com>
Signed-off-by: Rodrigo Alencar <rodrigo.alencar@analog.com>
Signed-off-by: Jonathan Cameron <jonathan.cameron@oss.qualcomm.com>
Use guarded mutex lock to facilitate code review when adding new
attributes. This will allow for early returns, avoiding error-prone
locking and unlocking in error paths. This also adds missing include
linux/cleanup.h. Gain-control support will allow the scale attribute
to be configurable.
Reviewed-by: Maxwell Doose <m32285159@gmail.com>
Reviewed-by: Joshua Crofts <joshua.crofts1@gmail.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Reviewed-by: David Lechner <dlechner@baylibre.com>
Signed-off-by: Rodrigo Alencar <rodrigo.alencar@analog.com>
Signed-off-by: Jonathan Cameron <jonathan.cameron@oss.qualcomm.com>
Use of local SPI bus data to manage a collection of SPI transfers and
flush them to the SPI platform driver with the sync() operation. This
allows for faster handling of multiple channel DAC writes, avoiding kernel
overhead per spi_sync() call, which will be helpful when enabling
triggered buffer support. For consistency, the read operation leverages
the same transfer data rather than a stack-allocated array.
Reviewed-by: David Lechner <dlechner@baylibre.com>
Signed-off-by: Rodrigo Alencar <rodrigo.alencar@analog.com>
Signed-off-by: Jonathan Cameron <jonathan.cameron@oss.qualcomm.com>
Add sync() to operation to ad5686_bus_ops, which can be used to flush
multiple pending data transfers at once. This is going to be used when
implementing triggered buffer support.
Reviewed-by: David Lechner <dlechner@baylibre.com>
Signed-off-by: Rodrigo Alencar <rodrigo.alencar@analog.com>
Signed-off-by: Jonathan Cameron <jonathan.cameron@oss.qualcomm.com>
Replace usage of bit shifting macros for FIELD_PREP(), which would not
ignore bit masking when preparing SPI/I2C commands. This change is a code
hardening measure to be paired with the upcoming triggered buffer support.
For the AD5310 regmap case, 16-bit data coming from the buffer may overlap
with command bits if the data field is unmasked.
*_REF_BIT_MSK and *_PD_MSK bit position macros are renamed (with a DATA
prefix) so to indicate that they are relative to the DATA field.
Reported-by: sashiko-bot@kernel.org
Closes: https://lore.kernel.org/all/20260628143026.EC6CA1F000E9@smtp.kernel.org/
Reviewed-by: David Lechner <dlechner@baylibre.com>
Signed-off-by: Rodrigo Alencar <rodrigo.alencar@analog.com>
Signed-off-by: Jonathan Cameron <jonathan.cameron@oss.qualcomm.com>
Verify that chip_info pointer is not NULL. If a user binds the driver
using driver_override via sysfs with a device name not present in the
id_table or of_match_table, match data will be NULL.
Fixes: 0eb1728461 ("iio: dac: ad5686: drop enum id")
Reported-by: sashiko-bot@kernel.org
Closes: https://lore.kernel.org/all/20260710113149.53EC51F000E9@smtp.kernel.org/
Signed-off-by: Rodrigo Alencar <rodrigo.alencar@analog.com>
Reviewed-by: Joshua Crofts <joshua.crofts1@gmail.com>
Signed-off-by: Jonathan Cameron <jonathan.cameron@oss.qualcomm.com>
Use dev_err_probe() instead of dev_err() to simplify the error path
and cleanly handle deferred probing.
Signed-off-by: Vojtěch Krátký <vo.kratky@seznam.cz>
Signed-off-by: Jonathan Cameron <jonathan.cameron@oss.qualcomm.com>
Fix misspelling of 'reference' (was 'referance') in the
vrefp-supply and vrefn-supply descriptions.
Signed-off-by: Yahya Toubali <yahya@yahyatoubali.me>
Signed-off-by: Jonathan Cameron <jonathan.cameron@oss.qualcomm.com>
The 13 comment blocks in dds.h noting which sysfs attribute each
convenience macro creates are opened with the kernel-doc /** marker,
but they are not kernel-doc: there is no identifier to document.
Running kernel-doc on the file emits 103 warnings:
$ scripts/kernel-doc -none drivers/staging/iio/frequency/dds.h
Warning: drivers/staging/iio/frequency/dds.h:10 Cannot find
identifier on line:
* /sys/bus/iio/devices/.../out_altvoltageX_frequencyY
The header is not scanned during normal builds (build-time kernel-doc
checks cover .c files), so the warnings only show up when kernel-doc
is invoked on the file directly.
The comments have carried the /** marker since the file was introduced
in commit 4851d97d87 ("Staging: IIO: dds.h convenience macros"). The
attributes themselves are already documented in
drivers/staging/iio/Documentation/sysfs-bus-iio-dds, so demote the
comments to plain /* style rather than converting them into kernel-doc
for the macros. No functional change.
Assisted-by: Claude:claude-sonnet-5
Signed-off-by: Babanpreet Singh <bbnpreetsingh@gmail.com>
Signed-off-by: Jonathan Cameron <jonathan.cameron@oss.qualcomm.com>
Reading the in_accel_scale attribute on the DMARD09 has always returned
-EINVAL: the channels advertise scale via info_mask_shared_by_type so the
IIO core exposes the attribute, but dmard09_read_raw() only handles
IIO_CHAN_INFO_RAW, so a SCALE read falls through to 'default: return
-EINVAL':
$ cat .../iio:deviceX/in_accel_scale
cat: in_accel_scale: Invalid argument
leaving userspace with raw counts it cannot convert to m/s^2.
The driver was written from a vendor source [1] without a datasheet, and
the scale was declared but never implemented. The vendor source carries
the sensitivity: its conversion is
acc = raw * GRAVITY_EARTH_1000 / sensitivity (then / 1000 -> m/s^2)
with sensitivity = 32 and GRAVITY_EARTH_1000 = 9807 ("about
(9.80665)*1000"), i.e. 32 counts correspond to 1 g.
That sensitivity applies to the value this driver already reports as raw:
the vendor reduces each 16-bit sample to a signed 9-bit value, and the
preparation in dmard09_read_raw() yields the same value. It is
self-consistent: 256 counts / 32 = 8 g full scale, matching the +/-8g
range.
Implement the scale derived from that sensitivity using standard gravity:
scale = 9.80665 / 32 = 0.3064578125 m/s^2 per LSB
Link: 1f49d8c87b/custom/common/kernel/accelerometer/dmard09/dmard09.c [1]
Fixes: a4fa6509dd ("iio: accel: add support for the Domintech DMARD09 3-axis accelerometer")
Signed-off-by: Mert Seftali <mertsftl@gmail.com>
Reviewed-by: Joshua Crofts <joshua.crofts1@gmail.com>
Signed-off-by: Jonathan Cameron <jonathan.cameron@oss.qualcomm.com>
rpr0521_runtime_suspend() powers the device down and marks the regmap
cache dirty. rpr0521_runtime_resume() syncs the cache before restoring
enabled ALS/PXS channels, but currently ignores a regcache_sync()
failure and can still return success.
Return the regcache_sync() error so resume does not hide a failed
register restore.
Signed-off-by: Pengpeng Hou <pengpeng@iscas.ac.cn>
Signed-off-by: Jonathan Cameron <jonathan.cameron@oss.qualcomm.com>
vcnl4035_runtime_suspend() marks the regmap cache dirty before runtime
suspend. vcnl4035_runtime_resume() then syncs the cache before re-
enabling ALS, but currently ignores a regcache_sync() failure and can
still report resume success.
Return the regcache_sync() error so the PM core sees the failed register
restore.
Signed-off-by: Pengpeng Hou <pengpeng@iscas.ac.cn>
Signed-off-by: Jonathan Cameron <jonathan.cameron@oss.qualcomm.com>
Replace explicit NULL pointer comparisons with implicit checks across
HID sensor IIO drivers to fix kernel coding style.
CHECK: Comparison to NULL could be written ...
No functional change.
Signed-off-by: Sanjay Chitroda <sanjayembeddedse@gmail.com>
Reviewed-by: Maxwell Doose <m32285159@gmail.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Adjust alignment of parentheses across HID sensor IIO drivers to
improve readability and maintain consistency with kernel coding style.
While updating the formatting, group related arguments consistently in
multi-line function signatures where appropriate.
No functional change intended.
Signed-off-by: Sanjay Chitroda <sanjayembeddedse@gmail.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
-----BEGIN PGP SIGNATURE-----
iQFSBAABCgA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAmpK+lYeHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGsv8H/Rn7Hr3Hp8t6au8B
xQueZThJWjqQ4v8pyLnXF6OomKiDR24OTXMCrFgDkcmZ7RK2ALqowI3tQVwLUTuI
yUN0qL2z2y+LyTcO0CYf3Lple8KlgLAXYMsv7pGLsOvhS7BW2jW97/bcbpUNxoHb
eghxqbIEnyRImUbbyg+nW7VVk65RKdPUNkBPXfQ2NMVwe+SDE5Rl+NXNVqDNjGad
soDTUBrD9yXkWX+4s0myleE62UzzH5nYgGPQeQgYmzWgq7LybH6WBlbQK9D7ODJR
Cw3LCq1hwZZ2w04Yx+XwMHquGJYHW8L2pj77h95uhzksz8buKnM0AGwBCTC6RMoi
AyUQvdc=
=JUWl
-----END PGP SIGNATURE-----
Merge tag 'v7.2-rc2' into togreg
Linux 7.2-rc2
Done to resolve conflicts with header reorg around mod_devicetable.h
and provide a base for other inflight series that touch the includes.
Top-level comment is not a kerneldoc, so drop marker to fix W=1 warning:
drivers/iio/adc/ade9000.c:2 This comment starts with '/**', but isn't a kernel-doc comment. Refer to Documentation/doc-guide/kernel-doc.rst
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Reviewed-by: Maxwell Doose <m32285159@gmail.com>
Reviewed-by: Joshua Crofts <joshua.crofts1@gmail.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
CPUs when Intel SNC (Sub-NUMA Clustering) is enabled
(Reinette Chatre)
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----
iQJFBAABCgAvFiEEBpT5eoXrXCwVQwEKEnMQ0APhK1gFAmpKEsURHG1pbmdvQGtl
cm5lbC5vcmcACgkQEnMQ0APhK1gcWhAApp+w5vUx0FXlou1Mzvn63bXey9/CMXyX
rrUeWA+ic7PpNvImuwixdyPyS1CnF2l7lMcmOtiNE4wnRvCf+0rsrwgYy4m4qd/2
aLAftFDp9WhKKH3Bb6gnVfMXiXmYb4eCQO0pRhJY26QtVJ2RGkbenW/TdTnAAAwS
KO8bJGsllufiF0+k4G5YMgiVcgZFByn/nuqmzvIc+oKQt5LSMvkKijoM7ozX9q5g
c1ABWvag3KWU2gFI00GfvzuQ7n7ckGhBVRwtO9DMox68liOlKOHedEFF0A0+KiDt
fk6b2LFbqm6hB7TpWRQqQ+rPusbDdAVxKG8ehIkjR8BD49VwzZUcr5kiWS5/xplm
a9F7cJpAJiuSiTi2HYtQVOlrCujonmjt11qqj3cCCjkton+IC9twhDkrj6+Kxygq
W3oc8Gia2JWoFBNt/6l0iKRJjluqgPJ8crPHpnDr4C5KEnsEIqCQsSPsVjoYM5mY
+xwS9jMJM7Dhrw3OZ6b5D8jY9oonBM/BB+jMomQ9ncDijUwKybgqp0JXB/3ydIw3
ci69tewFdVD+9EyNAz+dqANuhNyF1JTFza/5QxAU88E1wp2O2WjahSPvkNU/ekNK
jDGLf8VyiI08bH2pyYIhEhcvmTZ5Ocyuj9zA4Ufi2V3gaDMkvMXRipxm50dAhaWG
CMoZ+wTnI/8=
=mae/
-----END PGP SIGNATURE-----
Merge tag 'x86-urgent-2026-07-05' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fix from Ingo Molnar:
- Prevent OOB access in the resctrl code while offlining
CPUs when Intel SNC (Sub-NUMA Clustering) is enabled
(Reinette Chatre)
* tag 'x86-urgent-2026-07-05' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86,fs/resctrl: Prevent out-of-bounds access while offlining CPU when SNC enabled
- Fix a perf_event_attr::remove_on_exec bug for group
events (Taeyang Lee)
- Fix uprobes CALL emulation interaction with shadow stacks,
and add a testcase for this (David Windsor)
- Fix uprobes unregister bug (Jiri Olsa)
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=Mb4z
-----END PGP SIGNATURE-----
Merge tag 'perf-urgent-2026-07-05' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull perf events fixes from Ingo Molnar:
- Fix a perf_event_attr::remove_on_exec bug for group events
(Taeyang Lee)
- Fix uprobes CALL emulation interaction with shadow stacks, and
add a testcase for this (David Windsor)
- Fix uprobes unregister bug (Jiri Olsa)
* tag 'perf-urgent-2026-07-05' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
uprobes/x86: Use proper mm_struct in __in_uprobe_trampoline
selftests/x86: Add shadow stack uprobe CALL test
x86/uprobes: Keep shadow stack in sync for emulated CALLs
perf/core: Detach event groups during remove_on_exec
- Fix a resource leak in the RISC-V imsic-early driver
(Haoxiang Li)
- Fix an OF node reference leak in the ARM gic-v3-its driver
(Yuho Choi)
- Fix a dangling handler function on module removal bug in
the TS-4800 ARM board irqchip driver (Qingshuang Fu)
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=aWLS
-----END PGP SIGNATURE-----
Merge tag 'irq-urgent-2026-07-05' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq fixes from Ingo Molnar:
"Misc irqchip driver fixes:
- Fix a resource leak in the RISC-V imsic-early driver (Haoxiang Li)
- Fix an OF node reference leak in the ARM gic-v3-its driver (Yuho
Choi)
- Fix a dangling handler function on module removal bug in the
TS-4800 ARM board irqchip driver (Qingshuang Fu)"
* tag 'irq-urgent-2026-07-05' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
irqchip/ts4800: Fix missing chained handler cleanup on remove
irqchip/gic-v3-its: Fix OF node reference leak
irqchip/irq-riscv-imsic-early: Fix fwnode leak on state setup failure
A standard set of driver-specific fixes and quirks accumulated since
the merge window:
ASoC:
- SOF: Sanity check to prevent OOB reads
- rsnd: Fix clock leak and double-disable issues with PM
- tas675x: Misc fixes for register fields, etc
- lpass-va-macro: Correct codec version for Qualcomm SC7280
- amd-yc: DMIC quirk for Alienware m15 R7 AMD
Others:
- us144mkii: Fix a UAF on disconnect and anchor list corruption
- HD-audio: Realtek quirks for HP models
-----BEGIN PGP SIGNATURE-----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=eXcj
-----END PGP SIGNATURE-----
Merge tag 'sound-7.2-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"A standard set of driver-specific fixes and quirks accumulated since
the merge window:
ASoC:
- SOF: Sanity check to prevent OOB reads
- rsnd: Fix clock leak and double-disable issues with PM
- tas675x: Misc fixes for register fields, etc
- lpass-va-macro: Correct codec version for Qualcomm SC7280
- amd-yc: DMIC quirk for Alienware m15 R7 AMD
Others:
- us144mkii: Fix a UAF on disconnect and anchor list corruption
- HD-audio: Realtek quirks for HP models"
* tag 'sound-7.2-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
ASoC: rsnd: src: Add missing scu_supply clock to suspend/resume
Documentation: sound: tas675x: Fix temperature range and impedance documentation
ASoC: codecs: tas675x: Fix CHx temperature range register bit fields
ASoC: codecs: tas675x: use READ_ONCE for params to be used concurrently
ASoC: rsnd: adg: make rsnd_adg_clk_control() idempotent
ASoC: SOF: validate probe info element counts
ALSA: usx2y: us144mkii: fix work UAF on disconnect
ASoC: amd: yc: Add Alienware m15 R7 AMD to DMIC quirk table
ALSA: hda/realtek: Add quirk for HP Victus 16-e0xxx (88EE) to enable mute LED
MAINTAINERS: ASoC: SOF: add AMD reviewer for Sound Open Firmware
ASoC: codecs: lpass-va-macro: Fix LPASS Codec Version for SC7280
ALSA: us144mkii: capture_urb_complete: redundant usb_anchor_urb corrupts anchor list on each resubmission
A small set of fixes that came in since -rc1, we have one core fix for
shutting down target mode properly if the system suspends while it's
running plus a small set of fairly unremarkable device specific fixes.
There's also a couple of pure DT binding changes for Renesas SoCs, the
power domains one allows some SoCs to be correctly described with
existing code.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmpKRNUACgkQJNaLcl1U
h9DGTAf9GNwul6yPo0ybe0uwbkuymsUhkf6oWz8qVPY4nFiQfP+pGiFae7gJrST7
gCeyTlqPT2549MpxgsJwxCdsAaX4VuJbdwY1U8OVeg5VCtVmv/geDweJBXax5uHR
EKayi1W8wGrdt+xReDvbcqS9T+kwyRWxrrWRi7HIz7P4Lbziq8naQaPQ6LODnHnT
h5/M9nr4VjQh+kSHIIOyHlN10hQR256XRHoZY6e7yQmJfzxayN9NTw7MmIw7kE3P
ZztQT8VcqaT4hlsJYZKLC9anSeWz03aTnJ3lPpKy935Od1PktElGEV6SLgbX/hEZ
QI6rjVNbe3UT5fiy+PjMDSl67II+DA==
=wCwg
-----END PGP SIGNATURE-----
Merge tag 'spi-fix-v7.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi
Pull spi fixes from Mark Brown:
"A small set of fixes that came in since -rc1, we have one core fix for
shutting down target mode properly if the system suspends while it's
running plus a small set of fairly unremarkable device specific fixes.
There's also a couple of pure DT binding changes for Renesas SoCs, the
power domains one allows some SoCs to be correctly described with
existing code"
* tag 'spi-fix-v7.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
spi: rzv2h-rspi: Fix DMA transfer error handling for signal interruption
spi: dt-bindings: snps,dw-apb-ssi: add 'power-domains' property
spi: dt-bindings: snps,dw-apb-ssi: drop superfluous RZ/N1 entry
spi: dw: use the correct error msg if request_irq() fails
spi: dw: fix first spi transfer with dma always fallback to PIO
spi: core: Abort active target transfer on controller suspend
spi: sh-msiof: abort transfers when reset times out
Use namespaced exports for IIO consumer API functions.
This will make it easier to manage the IIO export surface. Consumer drivers
will only be provided access to a specific set of functions, thereby
restricting usage of internal IIO functions by other parts of the kernel.
This change cannot be split into several parts without breaking
bisectability, thus all of the affected drivers are modified at once.
Acked-by: Sebastian Reichel <sebastian.reichel@collabora.com> # for power-supply
Acked-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Signed-off-by: Romain Gantois <romain.gantois@bootlin.com>
Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Acked-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
The driver has an OF match table wired to .of_match_table, but does
not export the table with MODULE_DEVICE_TABLE().
Add the missing MODULE_DEVICE_TABLE(of, ...) entry so module alias
information is generated for OF based module autoloading.
This is a source-level fix. It does not claim dynamic hardware
reproduction; the evidence is the driver-owned match table, its use by
the platform driver, and the missing module alias publication.
Signed-off-by: Pengpeng Hou <pengpeng@iscas.ac.cn>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
The driver has a match table for the spi bus wired into its driver
structure, but the table is not exported with MODULE_DEVICE_TABLE().
Add the missing MODULE_DEVICE_TABLE() entry so module alias information
is generated for automatic module loading.
This is a source-level fix. It does not claim dynamic hardware
reproduction; the evidence is the driver-owned match table, its use by
the driver registration structure, and the missing module alias
publication.
Signed-off-by: Pengpeng Hou <pengpeng@iscas.ac.cn>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
The AD3532R/AD3532 is a 16-channel, 16-bit voltage output DAC. It shares
similar functionality with AD3530R but splits its registers into two
banks: bank 0 at 0x10xx for channels 0-7 and bank 1 at 0x30xx for
channels 8-15. The input, LDAC trigger and operating-mode registers are
therefore selected per bank.
Add the AD3532R register map, channel specs, per-bank register arrays, a
dedicated powerdown handler and its own regmap_config, reusing the
table-driven helpers for the shared configuration steps.
Signed-off-by: Kim Seer Paller <kimseer.paller@analog.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Devices with a larger register map need their own regmap_config so
debugfs register access stays within each device's address range.
Move the config into the chip_info table and let probe pass the per-chip
config. All current devices share the same config, so no functional
change.
Signed-off-by: Kim Seer Paller <kimseer.paller@analog.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Devices with a multi-bank register map repeat the same configuration
across several banks, which the hardcoded register addresses in
ad3530r_setup() cannot cover.
Move the addresses into per-chip arrays and add ad3530r_set_reg_bank_bits()
and ad3530r_write_reg_banks() to apply an operation to every bank. Each
current device has a single bank, so no functional change.
Signed-off-by: Kim Seer Paller <kimseer.paller@analog.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
The software LDAC trigger register is stored in the chip_info table as a
fixed register address. Devices with a multi-bank register architecture
select the trigger register based on the channel being updated, which a
single static address cannot express.
Convert sw_ldac_trig_reg into a function pointer that returns the
trigger register for a given channel, mirroring the input_ch_reg
callback.
Signed-off-by: Kim Seer Paller <kimseer.paller@analog.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
The AD3532R/AD3532 is a 16-channel version of the AD3530R/AD3530.
This adds compatible strings for the AD3532R/AD3532.
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Kim Seer Paller <kimseer.paller@analog.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
