On the X1E80100 QCP, &vreg_l3e_1p2 only powers &usb_mp_qmpphy0/1
(i.e. USBSS_3 and USBSS_4). The QMP PHYs for USB_0, USB_1 and USB_2
are actually powered by &vreg_l2j_1p2.
Cc: stable@vger.kernel.org
Fixes: 20676f7819 ("arm64: dts: qcom: x1e80100-qcp: Fix USB PHYs regulators")
Signed-off-by: Stephan Gerhold <stephan.gerhold@linaro.org>
Reviewed-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20241210-x1e80100-usb-qmp-supply-fix-v1-8-0adda5d30bbd@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
On the X1E80100 CRD, &vreg_l3e_1p2 only powers &usb_mp_qmpphy0/1
(i.e. USBSS_3 and USBSS_4). The QMP PHYs for USB_0, USB_1 and USB_2
are actually powered by &vreg_l2j_1p2.
Since x1e80100-microsoft-romulus mostly just mirrors the power supplies
from the x1e80100-crd device tree, assume that the fix also applies here.
Cc: stable@vger.kernel.org
Fixes: 09d77be560 ("arm64: dts: qcom: Add support for X1-based Surface Laptop 7 devices")
Signed-off-by: Stephan Gerhold <stephan.gerhold@linaro.org>
Reviewed-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20241210-x1e80100-usb-qmp-supply-fix-v1-7-0adda5d30bbd@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
On the X1E80100 CRD, &vreg_l3e_1p2 only powers &usb_mp_qmpphy0/1
(i.e. USBSS_3 and USBSS_4). The QMP PHYs for USB_0, USB_1 and USB_2
are actually powered by &vreg_l2j_1p2.
Since x1e80100-lenovo-yoga-slim7x mostly just mirrors the power supplies
from the x1e80100-crd device tree, assume that the fix also applies here.
Cc: stable@vger.kernel.org
Fixes: 45247fe17d ("arm64: dts: qcom: x1e80100: add Lenovo Thinkpad Yoga slim 7x devicetree")
Signed-off-by: Stephan Gerhold <stephan.gerhold@linaro.org>
Reviewed-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20241210-x1e80100-usb-qmp-supply-fix-v1-6-0adda5d30bbd@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
On the X1E80100 CRD, &vreg_l3e_1p2 only powers &usb_mp_qmpphy0/1
(i.e. USBSS_3 and USBSS_4). The QMP PHYs for USB_0, USB_1 and USB_2
are actually powered by &vreg_l2j_1p2.
Since x1e80100-dell-xps13-9345 mostly just mirrors the power supplies from
the x1e80100-crd device tree, assume that the fix also applies here.
Cc: stable@vger.kernel.org
Fixes: f5b788d0e8 ("arm64: dts: qcom: Add support for X1-based Dell XPS 13 9345")
Signed-off-by: Stephan Gerhold <stephan.gerhold@linaro.org>
Tested-by: Aleksandrs Vinarskis <alex.vinarskis@gmail.com>
Reviewed-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20241210-x1e80100-usb-qmp-supply-fix-v1-5-0adda5d30bbd@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
On the X1E80100 CRD, &vreg_l3e_1p2 only powers &usb_mp_qmpphy0/1
(i.e. USBSS_3 and USBSS_4). The QMP PHYs for USB_0, USB_1 and USB_2
are actually powered by &vreg_l2j_1p2.
Cc: stable@vger.kernel.org
Fixes: ae5cee8e73 ("arm64: dts: qcom: x1e80100-crd: Fix USB PHYs regulators")
Signed-off-by: Stephan Gerhold <stephan.gerhold@linaro.org>
Reviewed-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20241210-x1e80100-usb-qmp-supply-fix-v1-4-0adda5d30bbd@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
On the X1E80100 CRD, &vreg_l3e_1p2 only powers &usb_mp_qmpphy0/1
(i.e. USBSS_3 and USBSS_4). The QMP PHYs for USB_0, USB_1 and USB_2
are actually powered by &vreg_l2j_1p2.
Since x1e80100-asus-vivobook-s15 mostly just mirrors the power supplies
from the x1e80100-crd device tree, assume that the fix also applies here.
Cc: stable@vger.kernel.org
Fixes: d0e2f8f62d ("arm64: dts: qcom: Add device tree for ASUS Vivobook S 15")
Signed-off-by: Stephan Gerhold <stephan.gerhold@linaro.org>
Tested-by: Maud Spierings <maud_spierings@hotmail.com>
Reviewed-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20241210-x1e80100-usb-qmp-supply-fix-v1-3-0adda5d30bbd@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
On the X1E80100 CRD, &vreg_l3e_1p2 only powers &usb_mp_qmpphy0/1
(i.e. USBSS_3 and USBSS_4). The QMP PHYs for USB_0, USB_1 and USB_2
are actually powered by &vreg_l2j_1p2.
Since x1e78100-lenovo-thinkpad-t14s mostly just mirrors the power supplies
from the x1e80100-crd device tree, assume that the fix also applies here.
Cc: stable@vger.kernel.org
Fixes: 7d1cbe2f49 ("arm64: dts: qcom: Add X1E78100 ThinkPad T14s Gen 6")
Signed-off-by: Stephan Gerhold <stephan.gerhold@linaro.org>
Reviewed-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20241210-x1e80100-usb-qmp-supply-fix-v1-2-0adda5d30bbd@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
On the X1E80100 CRD, &vreg_l3e_1p2 only powers &usb_mp_qmpphy0/1
(i.e. USBSS_3 and USBSS_4). The QMP PHYs for USB_0, USB_1 and USB_2
are actually powered by &vreg_l2j_1p2.
Since x1e001de-devkit mostly just mirrors the power supplies from the
x1e80100-crd device tree, assume that the fix also applies here.
Cc: stable@vger.kernel.org
Fixes: 7b8a31e82b ("arm64: dts: qcom: Add X1E001DE Snapdragon Devkit for Windows")
Signed-off-by: Stephan Gerhold <stephan.gerhold@linaro.org>
Reviewed-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20241210-x1e80100-usb-qmp-supply-fix-v1-1-0adda5d30bbd@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The Asus vivobook s15 uses the ATNA56AC03 panel.
This panel is controlled by the atna33xc20 driver instead of the generic
edp-panel driver
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Maud Spierings <maud_spierings@hotmail.com>
Link: https://lore.kernel.org/r/20241204-asus_qcom_display-v6-1-91079cd8234e@hotmail.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Introduce device tree for the HP Omnibook X Laptop 14-fe0750ng
(hp-omnibook-x14). It is a Laptop based on the Qualcomm Snapdragon
X Elite SoC. There seem to be other SKUs, some with Wifi-7 (WCN7850)
instead of Wifi-6E (WCN6855). This dt explicitly supports WCN6855,
I haven't found a good way yet to describe both.
PDF link: https://www8.hp.com/h20195/V2/GetPDF.aspx/c08989140
Supported features:
- Keyboard (no function keys though)
- Display
- PWM brightness control (works via brightnessctl)
- Touchpad
- Touchscreen
- PCIe ports (pcie4, pcie6a)
- USB type-c, type-a
- WCN6855 Wifi-6E
- WCN6855 Bluetooth
- ADSP and CDSP
- X1 GPU
- GPIO Keys (Lid switch)
- Audio definition (works via USB)
Signed-off-by: Jens Glathe <jens.glathe@oldschoolsolutions.biz>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20241202-hp-omnibook-x14-v3-3-0fcd96483723@oldschoolsolutions.biz
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Add the uart14 instance for X1E80100 (typically used for Bluetooth).
Signed-off-by: Stephan Gerhold <stephan.gerhold@linaro.org>
Reviewed-by: Johan Hovold <johan+linaro@kernel.org>
Tested-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20241007-x1e80100-pwrseq-qcp-v1-2-f7166510ab17@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Add the power domains and OPP tables to all the QUP-related UART/I2C/SPI
nodes to ensure that we vote for the necessary performance states. Similar
to sm8350.dtsi, the OPPs depend on the QUP instance. The first two
instances in each geniqup group need &rpmhpd_opp_svs starting at 120MHz,
the others already starting at 100MHz. I2C always runs at a lower clock
frequency and therefore uses a fixed vote.
Signed-off-by: Stephan Gerhold <stephan.gerhold@linaro.org>
Reviewed-by: Johan Hovold <johan+linaro@kernel.org>
Tested-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20241007-x1e80100-pwrseq-qcp-v1-1-f7166510ab17@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Reboot modes were originally managed by PMIC pon driver on mobile/IoT
platforms, such as sm8150,sm8250,qdu1000... But recently, QCS615 is
going to adopt PSCI to manage linux reboot modes, which involves firm
wares to co-work with. In this case, reboot-modes should be removed
from pon dts node to avoid conflicting. This implies that reboot modes
go with devices rather than PMICs as well.
Signed-off-by: Tingguo Cheng <quic_tingguoc@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20241202-adds-spmi-pmic-peripherals-for-qcs615-v6-2-bdd306b4940d@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The X Elite QCP board has 3 USB-A ports. The ones labed as USB3 and
USB4/6 are both connected to the multiport controller, each one via a
separate NXP PTN3222 eUSB2-to-USB2 redriver to the eUSB2 PHY for
High-Speed support, with a dedicated QMP PHY for SuperSpeed support.
Describe these two redrivers and enable each pair of PHYs along with the
USB controller, all in order to enable support for these 2 USB-A ports.
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Link: https://lore.kernel.org/r/20241202-x1e80100-qcp-t14-enable-usb-type-a-ports-v2-2-7360ed65c769@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The Thinkpad T14s has 2 USB-A ports, both connected to the USB
multiport controller, each one via a separate NXP PTN3222 eUSB2-to-USB2
redriver to the eUSB2 PHY for High-Speed support, with a dedicated QMP
PHY for SuperSpeed support.
Describe each redriver and then enable each pair of PHYs and the
USB controller itself, in order to enable support for the 2 USB-A ports.
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Link: https://lore.kernel.org/r/20241202-x1e80100-qcp-t14-enable-usb-type-a-ports-v2-1-7360ed65c769@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Add the missing interrupt lines and fix qusb2_phy being an impostor
of hs_phy_irq.
This happens to also fix warnings such as:
usb@6af8800: interrupt-names: ['hs_phy_irq', 'ss_phy_irq'] is too short
Fixes: 4753492de9 ("arm64: dts: qcom: msm8996: Add usb3 interrupts")
Signed-off-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20241129-topic-qcom_usb_dtb_fixup-v1-3-cba24120c058@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Add following coresight components for QCS8300 platform.
It includes CTI, dummy sink, dynamic Funnel, Replicator, STM,
TPDM, TPDA and TMC ETF.
Signed-off-by: Jie Gan <quic_jiegan@quicinc.com>
Acked-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20241219024208.3462358-1-quic_jiegan@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Add support for audio on Lenovo T14s laptop, coming with two speakers,
audio jack and two digital microphones.
This is very early work, not yet complete:
1. 2x speakers: work OK.
2. 2x digital microphones: work OK.
3. Headset (audio jack) recording: does not work.
4. Headphones playback (audio jack): channels are intermixed.
[krzysztof: correct DMIC routing and vamacro pinctrl, re-order nodes,
add commit msg]
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Co-developed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20241203111229.48967-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Although the HDK has no radio, the IPA part is still perfectly usable
(altough it doesn't register any real networking devices). Enable it to
make it possible to test IPA on this platform.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20230310203438.1585701-1-dmitry.baryshkov@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Add bluetooth node and this bluetooth module is connected to uart.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Jianhua Lu <lujianhua000@gmail.com>
Link: https://lore.kernel.org/r/20241201135716.141691-3-lujianhua000@gmail.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Add qca6390-pmu node, which is used to manage power supply sequence for wifi and
bluetooth on sm8250 soc based devices.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Jianhua Lu <lujianhua000@gmail.com>
Link: https://lore.kernel.org/r/20241201135716.141691-1-lujianhua000@gmail.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
As pointed out by Intel's robot, the node name doesn't adhere to
dt-bindings.
Fix errors like this one:
qcs9100-ride.dtb: qcom,gpi-dma@800000: $nodename:0: 'qcom,gpi-dma@800000' does not match '^dma-controller(@.*)?$'
Fixes: 34d17ccb5d ("arm64: dts: qcom: sa8775p: Add GPI configuration")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202411080206.vFLRjIBZ-lkp@intel.com/
Signed-off-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20241107-topic-sa8775_dma-v1-1-eb633e07b007@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The Qualcomm SA8775P platform comes with 2 DisplayPort controllers
for each mdss. edp0 and edp1 correspond to the DP controllers of
mdss0, whereas edp2 and edp3 correspond to the DP controllers of
mdss1. This change enables only the DP controllers, DPTX0 and DPTX1
alongside their corresponding PHYs of mdss0, which have been
validated.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Soutrik Mukhopadhyay <quic_mukhopad@quicinc.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20241125105747.6595-3-quic_mukhopad@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Add device tree nodes for the DPTX0 and DPTX1 controllers
with their corresponding PHYs found on Qualcomm SA8775P SoC.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Soutrik Mukhopadhyay <quic_mukhopad@quicinc.com>
Link: https://lore.kernel.org/r/20241125105747.6595-2-quic_mukhopad@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The qcs8300 SoC has a True Random Number Generator, add the node with
the correct compatible set.
Signed-off-by: Yuvaraj Ranganathan <quic_yrangana@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20241125064317.1748451-3-quic_yrangana@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Commit 4f79d0deae ("arm64: dts: qcom: sa8775p: add CPU idle states")
already added cpu and cluster idle-states but have not added CPU devices
to psci power domain without which idle states do not get detected.
Add CPUs to psci power domain.
Fixes: 4f79d0deae ("arm64: dts: qcom: sa8775p: add CPU idle states")
Signed-off-by: Maulik Shah <quic_mkshah@quicinc.com>
Reviewed-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Link: https://lore.kernel.org/r/20241112-sa8775p_cpuidle-v1-1-66ff3ba72464@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The Pixel 3a has two identical flash LEDs. Add them together.
Signed-off-by: Richard Acayan <mailingradian@gmail.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20241112024050.669578-9-mailingradian@gmail.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The commit adding these nodes did not use a SoC-specific node, fix that
to comply with bindings guidelines.
Fixes: 34d17ccb5d ("arm64: dts: qcom: sa8775p: Add GPI configuration")
Signed-off-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20241108-topic-sa8775_dma2-v1-2-1d3b0d08d153@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Add support for video, camera, display0 and display1 clock controllers
on SA8775P. The dispcc1 will be enabled based on board requirements.
Reviewed-by: Jagadeesh Kona <quic_jkona@quicinc.com>
Signed-off-by: Taniya Das <quic_tdas@quicinc.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20241025-sa8775p-mm-v4-resend-patches-v6-2-329a2cac09ae@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The UFS driver expects to be able to set load (and by extension, mode)
on its supply regulators. Add the necessary properties to make that
possible.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Rakesh Kota <quic_kotarake@quicinc.com>
Link: https://lore.kernel.org/r/20241017122858.3664474-1-quic_kotarake@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The LP5562 led@1 reg property should likely be set to 1 to match
the unit. Fix it.
Fixes: 4ac46b3682 ("arm64: dts: qcom: msm8996: xiaomi-gemini: Add support for Xiaomi Mi 5")
Signed-off-by: Marek Vasut <marex@denx.de>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20241006022012.366601-1-marex@denx.de
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
RB3 Gen2 has a trio of LEDs connected to the PM8350C's Light Pulse
Generator. Describe them.
Use the "red channel" as a panic indicator by default.
Signed-off-by: Konrad Dybcio <quic_kdybcio@quicinc.com>
[bjorn: Corrected colors]
Signed-off-by: Bjorn Andersson <bjorn.andersson@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20241004-rb3gen2-leds-v1-2-437cdbb4f6c0@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The downstream tree described more SDAM slices on the PMIC. Some of
them are actually required by other peripherals, whereas other are nice
to add for hardware description purposes.
Add them in.
Signed-off-by: Konrad Dybcio <quic_kdybcio@quicinc.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20241004-rb3gen2-leds-v1-1-437cdbb4f6c0@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
