[ Upstream commit d669101052 ]
If we are unable to lookup the chip-select GPIO, the error path will
call bcm2835_spi_cleanup() which unconditionally calls gpiod_put() on
the cs->gpio variable which we just determined was invalid.
Fixes: 21f252cd29 ("spi: bcm2835: reduce the abuse of the GPIO API")
Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://patch.msgid.link/20250401224238.2854256-1-florian.fainelli@broadcom.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 93d34608fd ]
devm_kasprintf() returns NULL when memory allocation fails. Currently,
imx_card_probe() does not check for this case, which results in a NULL
pointer dereference.
Add NULL check after devm_kasprintf() to prevent this issue.
Fixes: aa736700f4 ("ASoC: imx-card: Add imx-card machine driver")
Signed-off-by: Henry Martin <bsdhenrymartin@gmail.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20250401142510.29900-1-bsdhenrymartin@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit eada75467f ]
The vectorized io_uring NVMe passthru opcodes don't yet support fixed
buffers. But since userspace can trigger this condition based on the
io_uring SQE parameters, it shouldn't cause a kernel warning.
Signed-off-by: Caleb Sander Mateos <csander@purestorage.com>
Reviewed-by: Jens Axboe <axboe@kernel.dk>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Fixes: 23fd22e55b ("nvme: wire up fixed buffer support for nvme passthrough")
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3f7023171d ]
When a crashkernel is launched on RISC-V, the entry to purgatory is
done by trapping via the stvec CSR. From riscv_kexec_norelocate():
| ...
| /*
| * Switch to physical addressing
| * This will also trigger a jump to CSR_STVEC
| * which in this case is the address of the new
| * kernel.
| */
| csrw CSR_STVEC, a2
| csrw CSR_SATP, zero
stvec requires that the address is 4B aligned, which was not the case,
e.g.:
| Loaded purgatory at 0xffffc000
| kexec_file: kexec_file_load: type:1, start:0xffffd232 head:0x4 flags:0x6
The address 0xffffd232 not 4B aligned.
Correct by adding proper function alignment.
With this change, crashkernels loaded with kexec-file will be able to
properly enter the purgatory.
Fixes: 736e30af58 ("RISC-V: Add purgatory")
Signed-off-by: Björn Töpel <bjorn@rivosinc.com>
Reviewed-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Link: https://lore.kernel.org/r/20250328085313.1193815-1-bjorn@kernel.org
Signed-off-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 28093cfef5 ]
Commit 58ff537109 ("riscv: Omit optimized string routines when
using KASAN") introduced calls to EXPORT_SYMBOL() in assembly string
routines, which result in R_RISCV_64 relocations against
.export_symbol section. As these rountines are reused by RISC-V
purgatory and our relocator doesn't recognize these relocations, this
fails kexec-file-load with dmesg like
[ 11.344251] kexec_image: Unknown rela relocation: 2
[ 11.345972] kexec_image: Error loading purgatory ret=-8
Let's support R_RISCV_64 relocation to fix kexec on 64-bit RISC-V.
32-bit variant isn't covered since KEXEC_FILE and KEXEC_PURGATORY isn't
available.
Fixes: 58ff537109 ("riscv: Omit optimized string routines when using KASAN")
Signed-off-by: Yao Zi <ziyao@disroot.org>
Tested-by: Björn Töpel <bjorn@rivosinc.com>
Reviewed-by: Björn Töpel <bjorn@rivosinc.com>
Link: https://lore.kernel.org/r/20250326051445.55131-2-ziyao@disroot.org
Signed-off-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 83d78ac677 ]
Ryan sent a fix [1] for arm64 that applies to riscv too: in some hugetlb
functions, we must not use the pte value to get the size of a mapping
because the pte may not be present.
So use the already present size parameter for huge_pte_clear() and the
newly introduced size parameter for huge_ptep_get_and_clear(). And make
sure to gather A/D bits only on present ptes.
Fixes: 82a1a1f3bf ("riscv: mm: support Svnapot in hugetlb page")
Link: https://lore.kernel.org/all/20250217140419.1702389-1-ryan.roberts@arm.com/ [1]
Link: https://lore.kernel.org/r/20250317072551.572169-1-alexghiti@rivosinc.com
Signed-off-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1ebd494426 ]
Should an error occur after a successful regulator_bulk_enable() call,
regulator_bulk_disable() should be called, as already done in the remove
function.
Instead of adding an error handling path in the probe, switch from
devm_regulator_bulk_get() to devm_regulator_bulk_get_enable() and
simplify the remove function and some other places accordingly.
Finally, add a missing const when defining rt5665_supply_names to please
checkpatch and constify a few bytes.
Fixes: 33ada14a26 ("ASoC: add rt5665 codec driver")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://patch.msgid.link/e3c2aa1b2fdfa646752d94f4af968630c0d58248.1742629525.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 121df45b37 ]
When lowcore relocation is enabled, the machine check handler doesn't
use the lowcore address when setting _CIF_MCCK_GUEST. Fix this by
adding the missing base register.
Fixes: 0001b7bbc5 ("s390/entry: Make mchk_int_handler() ready for lowcore relocation")
Reported-by: Heiko Carstens <hca@linux.ibm.com>
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Sven Schnelle <svens@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8741d07379 ]
Now ublk driver depends on `ubq->canceling` for deciding if the request
can be dispatched via uring_cmd & io_uring_cmd_complete_in_task().
Once ubq->canceling is set, the uring_cmd can be done via ublk_cancel_cmd()
and io_uring_cmd_done().
So set ubq->canceling when queue is frozen, this way makes sure that the
flag can be observed from ublk_queue_rq() reliably, and avoids
use-after-free on uring_cmd.
Fixes: 216c8f5ef0 ("ublk: replace monitor with cancelable uring_cmd")
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20250327095123.179113-2-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b5322b6ec0 ]
History of the performance regression:
======================================
Since the following series of user copy updates were merged upstream
~2 years ago via:
a562456643 ("Merge branch 'x86-rep-insns': x86 user copy clarifications")
.. copy_user_generic() on x86_64 stopped doing alignment of the
writes to the destination to a 8 byte boundary for the non FSRM case.
Previously, this was done through the ALIGN_DESTINATION macro that
was used in the now removed copy_user_generic_unrolled function.
Turns out this change causes some loss of performance/throughput on
some use cases and specific CPU/platforms without FSRM and ERMS.
Lately I got two reports of performance/throughput issues after a
RHEL 9 kernel pulled the same upstream series with updates to user
copy functions. Both reports consisted of running specific
networking/TCP related testing using iperf3.
Partial upstream fix
====================
The first report was related to a Linux Bridge testing using VMs on a
specific machine with an AMD CPU (EPYC 7402), and after a brief
investigation it turned out that the later change via:
ca96b162bf ("x86: bring back rep movsq for user access on CPUs without ERMS")
... helped/fixed the performance issue.
However, after the later commit/fix was applied, then I got another
regression reported in a multistream TCP test on a 100Gbit mlx5 nic, also
running on an AMD based platform (AMD EPYC 7302 CPU), again that was using
iperf3 to run the test. That regression was after applying the later
fix/commit, but only this didn't help in telling the whole history.
Testing performed to pinpoint residual regression
=================================================
So I narrowed down the second regression use case, but running it
without traffic through a NIC, on localhost, in trying to narrow down
CPU usage and not being limited by other factor like network bandwidth.
I used another system also with an AMD CPU (AMD EPYC 7742). Basically,
I run iperf3 in server and client mode in the same system, for example:
- Start the server binding it to CPU core/thread 19:
$ taskset -c 19 iperf3 -D -s -B 127.0.0.1 -p 12000
- Start the client always binding/running on CPU core/thread 17, using
perf to get statistics:
$ perf stat -o stat.txt taskset -c 17 iperf3 -c 127.0.0.1 -b 0/1000 -V \
-n 50G --repeating-payload -l 16384 -p 12000 --cport 12001 2>&1 \
> stat-19.txt
For the client, always running/pinned to CPU 17. But for the iperf3 in
server mode, I did test runs using CPUs 19, 21, 23 or not pinned to any
specific CPU. So it basically consisted with four runs of the same
commands, just changing the CPU which the server is pinned, or without
pinning by removing the taskset call before the server command. The CPUs
were chosen based on NUMA node they were on, this is the relevant output
of lscpu on the system:
$ lscpu
...
Model name: AMD EPYC 7742 64-Core Processor
...
Caches (sum of all):
L1d: 2 MiB (64 instances)
L1i: 2 MiB (64 instances)
L2: 32 MiB (64 instances)
L3: 256 MiB (16 instances)
NUMA:
NUMA node(s): 4
NUMA node0 CPU(s): 0,1,8,9,16,17,24,25,32,33,40,41,48,49,56,57,64,65,72,73,80,81,88,89,96,97,104,105,112,113,120,121
NUMA node1 CPU(s): 2,3,10,11,18,19,26,27,34,35,42,43,50,51,58,59,66,67,74,75,82,83,90,91,98,99,106,107,114,115,122,123
NUMA node2 CPU(s): 4,5,12,13,20,21,28,29,36,37,44,45,52,53,60,61,68,69,76,77,84,85,92,93,100,101,108,109,116,117,124,125
NUMA node3 CPU(s): 6,7,14,15,22,23,30,31,38,39,46,47,54,55,62,63,70,71,78,79,86,87,94,95,102,103,110,111,118,119,126,127
...
So for the server run, when picking a CPU, I chose CPUs to be not on the same
node. The reason is with that I was able to get/measure relevant
performance differences when changing the alignment of the writes to the
destination in copy_user_generic.
Testing shows up to +81% performance improvement under iperf3
=============================================================
Here's a summary of the iperf3 runs:
# Vanilla upstream alignment:
CPU RATE SYS TIME sender-receiver
Server bind 19: 13.0Gbits/sec 28.371851000 33.233499566 86.9%-70.8%
Server bind 21: 12.9Gbits/sec 28.283381000 33.586486621 85.8%-69.9%
Server bind 23: 11.1Gbits/sec 33.660190000 39.012243176 87.7%-64.5%
Server bind none: 18.9Gbits/sec 19.215339000 22.875117865 86.0%-80.5%
# With the attached patch (aligning writes in non ERMS/FSRM case):
CPU RATE SYS TIME sender-receiver
Server bind 19: 20.8Gbits/sec 14.897284000 20.811101382 75.7%-89.0%
Server bind 21: 20.4Gbits/sec 15.205055000 21.263165909 75.4%-89.7%
Server bind 23: 20.2Gbits/sec 15.433801000 21.456175000 75.5%-89.8%
Server bind none: 26.1Gbits/sec 12.534022000 16.632447315 79.8%-89.6%
So I consistently got better results when aligning the write. The
results above were run on 6.14.0-rc6/rc7 based kernels. The sys is sys
time and then the total time to run/transfer 50G of data. The last
field is the CPU usage of sender/receiver iperf3 process. It's also
worth to note that each pair of iperf3 runs may get slightly different
results on each run, but I always got consistent higher results with
the write alignment for this specific test of running the processes
on CPUs in different NUMA nodes.
Linus Torvalds helped/provided this version of the patch. Initially I
proposed a version which aligned writes for all cases in
rep_movs_alternative, however it used two extra registers and thus
Linus provided an enhanced version that only aligns the write on the
large_movsq case, which is sufficient since the problem happens only
on those AMD CPUs like ones mentioned above without ERMS/FSRM, and
also doesn't require using extra registers. Also, I validated that
aligning only on large_movsq case is really enough for getting the
performance back.
I also tested this patch on an old Intel based non-ERMS/FRMS system
(with Xeon E5-2667 - Sandy Bridge based) and didn't get any problems:
no performance enhancement but also no regression either, using the
same iperf3 based benchmark. Also newer Intel processors after
Sandy Bridge usually have ERMS and should not be affected by this change.
[ mingo: Updated the changelog. ]
Fixes: ca96b162bf ("x86: bring back rep movsq for user access on CPUs without ERMS")
Fixes: 034ff37d34 ("x86: rewrite '__copy_user_nocache' function")
Reported-by: Ondrej Lichtner <olichtne@redhat.com>
Co-developed-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Herton R. Krzesinski <herton@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20250320142213.2623518-1-herton@redhat.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit bb58e1579f ]
We're trying to mix non-PIC/PIE objects into the otherwise-PIE
relocatable kernels, to avoid GOT/PLT references during early boot
alternative resolution (which happens before the GOT/PLT are set up).
riscv64-unknown-linux-gnu-ld: arch/riscv/errata/sifive/errata.o: relocation R_RISCV_HI20 against `tlb_flush_all_threshold' can not be used when making a shared object; recompile with -fPIC
riscv64-unknown-linux-gnu-ld: arch/riscv/errata/thead/errata.o: relocation R_RISCV_HI20 against `riscv_cbom_block_size' can not be used when making a shared object; recompile with -fPIC
Fixes: 8dc2a7e802 ("riscv: Fix relocatable kernels with early alternatives using -fno-pie")
Link: https://lore.kernel.org/r/20250326224506.27165-2-palmer@rivosinc.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 84c3c08f5a ]
ASUS VivoBook X515JA with PCI SSID 1043:14f2 also hits the same issue
as other VivoBook model about the mic pin assignment, and the same
workaround is required to apply ALC256_FIXUP_ASUS_MIC_NO_PRESENCE
quirk.
Fixes: 3b4309546b ("ALSA: hda: Fix headset detection failure due to unstable sort")
Link: https://bugzilla.kernel.org/show_bug.cgi?id=219902
Link: https://patch.msgid.link/20250326152205.26733-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2593f7e0dc ]
Set ret = 0 on successful completion of the processing loop in
cs_dsp_load() and cs_dsp_load_coeff() to ensure that the function
returns 0 on success.
All normal firmware files will have at least one data block, and
processing this block will set ret == 0, from the result of either
regmap_raw_write() or cs_dsp_parse_coeff().
The kunit tests create a dummy firmware file that contains only the
header, without any data blocks. This gives cs_dsp a file to "load"
that will not cause any side-effects. As there aren't any data blocks,
the processing loop will not set ret == 0.
Originally there was a line after the processing loop:
ret = regmap_async_complete(regmap);
which would set ret == 0 before the function returned.
Commit fe08b7d508 ("firmware: cs_dsp: Remove async regmap writes")
changed the regmap write to a normal sync write, so the call to
regmap_async_complete() wasn't necessary and was removed. It was
overlooked that the ret here wasn't only to check the result of
regmap_async_complete(), it also set the final return value of the
function.
Fixes: fe08b7d508 ("firmware: cs_dsp: Remove async regmap writes")
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://patch.msgid.link/20250323170529.197205-1-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8144e9c8f3 ]
Make sure we are not using DB's which were remapped for link status.
Fixes: f6e51c354b ("ntb: intel: split out the gen3 code")
Signed-off-by: Nikita Shubin <n.shubin@yadro.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Signed-off-by: Jon Mason <jdmason@kudzu.us>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit de203da734 ]
There is a kernel API ntb_mw_clear_trans() would pass 0 to both addr and
size. This would make xlate_pos negative.
[ 23.734156] switchtec switchtec0: MW 0: part 0 addr 0x0000000000000000 size 0x0000000000000000
[ 23.734158] ================================================================================
[ 23.734172] UBSAN: shift-out-of-bounds in drivers/ntb/hw/mscc/ntb_hw_switchtec.c:293:7
[ 23.734418] shift exponent -1 is negative
Ensuring xlate_pos is a positive or zero before BIT.
Fixes: 1e2fd202f8 ("ntb_hw_switchtec: Check for alignment of the buffer in mw_set_trans()")
Signed-off-by: Yajun Deng <yajun.deng@linux.dev>
Reviewed-by: Logan Gunthorpe <logang@deltatee.com>
Signed-off-by: Jon Mason <jdmason@kudzu.us>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5f1a58ed91 ]
This patch adds parentheses to parameters caller and callee of macros
make_call_t0 and make_call_ra. Every existing invocation of these two
macros uses a single variable for each argument, so the absence of the
parentheses seems okay. However, future invocations might use more
complex expressions as arguments. For example, a future invocation might
look like this: make_call_t0(a - b, c, call). Without parentheses in the
macro definition, the macro invocation expands to:
...
unsigned int offset = (unsigned long) c - (unsigned long) a - b;
...
which is clearly wrong.
The use of parentheses ensures arguments are correctly evaluated and
potentially saves future users of make_call_t0 and make_call_ra debugging
trouble.
Fixes: 6724a76cff ("riscv: ftrace: Reduce the detour code size to half")
Signed-off-by: Juhan Jin <juhan.jin@foxmail.com>
Reviewed-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Link: https://lore.kernel.org/r/tencent_AE90AA59903A628E87E9F80E563DA5BA5508@qq.com
Signed-off-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0f5cce3fc5 ]
Leak fixes back in 2008 missed one case - if we are trying to set affinity
and spufs_mkdir() fails, we need to drop the reference to neighbor.
Fixes: 58119068cb "[POWERPC] spufs: Fix memory leak on SPU affinity"
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c134deabf4 ]
prior to "[POWERPC] spufs: Fix gang destroy leaks" we used to have
a problem with gang lifetimes - creation of a gang returns opened
gang directory, which normally gets removed when that gets closed,
but if somebody has created a context belonging to that gang and
kept it alive until the gang got closed, removal failed and we
ended up with a leak.
Unfortunately, it had been fixed the wrong way. Dentry of gang
directory was no longer pinned, and rmdir on close was gone.
One problem was that failure of open kept calling simple_rmdir()
as cleanup, which meant an unbalanced dput(). Another bug was
in the success case - gang creation incremented link count on
root directory, but that was no longer undone when gang got
destroyed.
Fix consists of
* reverting the commit in question
* adding a counter to gang, protected by ->i_rwsem
of gang directory inode.
* having it set to 1 at creation time, dropped
in both spufs_dir_close() and spufs_gang_close() and bumped
in spufs_create_context(), provided that it's not 0.
* using simple_recursive_removal() to take the gang
directory out when counter reaches zero.
Fixes: 877907d37d "[POWERPC] spufs: Fix gang destroy leaks"
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d1ca8698ca ]
It's called from spufs_fill_dir(), and caller of that will do
spufs_rmdir() in case of failure. That does remove everything
we'd managed to create, but... the problem dentry is still
negative. IOW, it needs to be explicitly dropped.
Fixes: 3f51dd91c8 "[PATCH] spufs: fix spufs_fill_dir error path"
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 07c574eb53 ]
Fix netfs_unbuffered_read() to return an ssize_t rather than an int as
netfs_wait_for_read() returns ssize_t and this gets implicitly truncated.
Signed-off-by: David Howells <dhowells@redhat.com>
Link: https://lore.kernel.org/r/20250314164201.1993231-5-dhowells@redhat.com
Acked-by: "Paulo Alcantara (Red Hat)" <pc@manguebit.com>
cc: Jeff Layton <jlayton@kernel.org>
cc: Viacheslav Dubeyko <slava@dubeyko.com>
cc: Alex Markuze <amarkuze@redhat.com>
cc: Ilya Dryomov <idryomov@gmail.com>
cc: ceph-devel@vger.kernel.org
cc: linux-fsdevel@vger.kernel.org
Signed-off-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 815f80ad20 ]
pwm_num is set to 7 for these chips, but NCT6776_REG_PWM_MODE and
NCT6776_PWM_MODE_MASK only contain 6 values.
Fix this by adding another 0 to the end of each array.
Signed-off-by: Tasos Sahanidis <tasos@tasossah.com>
Link: https://lore.kernel.org/r/20250312030832.106475-1-tasos@tasossah.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit edcccc6892 ]
We are no longer depending on legacy device trees so
drop the no compatible check for NAND and OneNAND
nodes.
Suggested-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Roger Quadros <rogerq@kernel.org>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/r/20250114-omap-gpmc-drop-no-compatible-check-v1-1-262c8d549732@kernel.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 80b5f90158 ]
In can_send() and can_receive() CAN messages and CAN filter matches are
counted to be visible in the CAN procfs files.
KCSAN detected a data race within can_send() when two CAN frames have
been generated by a timer event writing to the same CAN netdevice at the
same time. Use atomic operations to access the statistics in the hot path
to fix the KCSAN complaint.
Reported-by: syzbot+78ce4489b812515d5e4d@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/all/67cd717d.050a0220.e1a89.0006.GAE@google.com
Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net>
Reviewed-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr>
Link: https://patch.msgid.link/20250310143353.3242-1-socketcan@hartkopp.net
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c21b02fd9c ]
These scripts fail if the kernel is tainted which leads to wrong test
failure reports in CI environments when an unrelated test triggers some
splat.
Check taint state at start of script and SKIP if its already dodgy.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a70f891e0f ]
When devmem socket is closed, netdev_rx_queue_restart() is called to
reset queue by the net_devmem_unbind_dmabuf(). But callback may return
-ENETDOWN if the interface is down because queues are already freed
when the interface is down so queue reset is not needed.
So, it should not warn if the return value is -ENETDOWN.
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Reviewed-by: Mina Almasry <almasrymina@google.com>
Link: https://patch.msgid.link/20250309134219.91670-8-ap420073@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4afacc9948 ]
When userspace invokes S4 the flow is:
1) amdgpu_pmops_prepare()
2) amdgpu_pmops_freeze()
3) Create hibernation image
4) amdgpu_pmops_thaw()
5) Write out image to disk
6) Turn off system
Then on resume amdgpu_pmops_restore() is called.
This flow has a problem that because amdgpu_pmops_thaw() is called
it will call amdgpu_device_resume() which will resume all of the GPU.
This includes turning the display hardware back on and discovering
connectors again.
This is an unexpected experience for the display to turn back on.
Adjust the flow so that during the S4 sequence display hardware is
not turned back on.
Reported-by: Xaver Hugl <xaver.hugl@gmail.com>
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/2038
Cc: Muhammad Usama Anjum <usama.anjum@collabora.com>
Tested-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Link: https://lore.kernel.org/r/20250306185124.44780-1-mario.limonciello@amd.com
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 68bfdc8dc0)
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3f674e7b67 ]
The PCIe error handling has the nvme driver quiesce the device, attempt
to restart it, then wait for that restart to complete.
A PCIe DPC event also toggles the PCIe link. If the slot doesn't have
out-of-band presence detection, this will trigger a pciehp
re-enumeration.
The error handling that calls nvme_error_resume is holding the device
lock while this happens. This lock blocks pciehp's request to disconnect
the driver from proceeding.
Meanwhile the nvme's reset can't make forward progress because its
device isn't there anymore with outstanding IO, and the timeout handler
won't do anything to fix it because the device is undergoing error
handling.
End result: deadlocked.
Fix this by having the timeout handler short cut the disabling for a
disconnected PCIe device. The downside is that we're relying on an IO
timeout to clean up this mess, which could be a minute by default.
Tested-by: Nilay Shroff <nilay@linux.ibm.com>
Reviewed-by: Nilay Shroff <nilay@linux.ibm.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 65be5c95d0 ]
The kernel requires X86_FEATURE_SGX_LC to be able to create SGX enclaves,
not just X86_FEATURE_SGX.
There is quite a number of hardware which has X86_FEATURE_SGX but not
X86_FEATURE_SGX_LC. A kernel running on such hardware does not create
the /dev/sgx_enclave file and does so silently.
Explicitly warn if X86_FEATURE_SGX_LC is not enabled to properly notify
users that the kernel disabled the SGX driver.
The X86_FEATURE_SGX_LC, a.k.a. SGX Launch Control, is a CPU feature
that enables LE (Launch Enclave) hash MSRs to be writable (with
additional opt-in required in the 'feature control' MSR) when running
enclaves, i.e. using a custom root key rather than the Intel proprietary
key for enclave signing.
I've hit this issue myself and have spent some time researching where
my /dev/sgx_enclave file went on SGX-enabled hardware.
Related links:
https://github.com/intel/linux-sgx/issues/837https://patchwork.kernel.org/project/platform-driver-x86/patch/20180827185507.17087-3-jarkko.sakkinen@linux.intel.com/
[ mingo: Made the error message a bit more verbose, and added other cases
where the kernel fails to create the /dev/sgx_enclave device node. ]
Signed-off-by: Vladis Dronov <vdronov@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Kai Huang <kai.huang@intel.com>
Cc: Jarkko Sakkinen <jarkko@kernel.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Sean Christopherson <sean.j.christopherson@intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20250309172215.21777-2-vdronov@redhat.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 09beefefb5 ]
The hypercall in hv_mark_gpa_visibility() is invoked with an input
argument and an output argument. The output argument ostensibly returns
the number of pages that were processed. But in fact, the hypercall does
not provide any output, so the output argument is spurious.
The spurious argument is harmless because Hyper-V ignores it, but in the
interest of correctness and to avoid the potential for future problems,
remove it.
Signed-off-by: Michael Kelley <mhklinux@outlook.com>
Reviewed-by: Nuno Das Neves <nunodasneves@linux.microsoft.com>
Link: https://lore.kernel.org/r/20250226200612.2062-2-mhklinux@outlook.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Message-ID: <20250226200612.2062-2-mhklinux@outlook.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 85b2b9c16d ]
A circular lock dependency splat has been seen involving down_trylock():
======================================================
WARNING: possible circular locking dependency detected
6.12.0-41.el10.s390x+debug
------------------------------------------------------
dd/32479 is trying to acquire lock:
0015a20accd0d4f8 ((console_sem).lock){-.-.}-{2:2}, at: down_trylock+0x26/0x90
but task is already holding lock:
000000017e461698 (&zone->lock){-.-.}-{2:2}, at: rmqueue_bulk+0xac/0x8f0
the existing dependency chain (in reverse order) is:
-> #4 (&zone->lock){-.-.}-{2:2}:
-> #3 (hrtimer_bases.lock){-.-.}-{2:2}:
-> #2 (&rq->__lock){-.-.}-{2:2}:
-> #1 (&p->pi_lock){-.-.}-{2:2}:
-> #0 ((console_sem).lock){-.-.}-{2:2}:
The console_sem -> pi_lock dependency is due to calling try_to_wake_up()
while holding the console_sem raw_spinlock. This dependency can be broken
by using wake_q to do the wakeup instead of calling try_to_wake_up()
under the console_sem lock. This will also make the semaphore's
raw_spinlock become a terminal lock without taking any further locks
underneath it.
The hrtimer_bases.lock is a raw_spinlock while zone->lock is a
spinlock. The hrtimer_bases.lock -> zone->lock dependency happens via
the debug_objects_fill_pool() helper function in the debugobjects code.
-> #4 (&zone->lock){-.-.}-{2:2}:
__lock_acquire+0xe86/0x1cc0
lock_acquire.part.0+0x258/0x630
lock_acquire+0xb8/0xe0
_raw_spin_lock_irqsave+0xb4/0x120
rmqueue_bulk+0xac/0x8f0
__rmqueue_pcplist+0x580/0x830
rmqueue_pcplist+0xfc/0x470
rmqueue.isra.0+0xdec/0x11b0
get_page_from_freelist+0x2ee/0xeb0
__alloc_pages_noprof+0x2c2/0x520
alloc_pages_mpol_noprof+0x1fc/0x4d0
alloc_pages_noprof+0x8c/0xe0
allocate_slab+0x320/0x460
___slab_alloc+0xa58/0x12b0
__slab_alloc.isra.0+0x42/0x60
kmem_cache_alloc_noprof+0x304/0x350
fill_pool+0xf6/0x450
debug_object_activate+0xfe/0x360
enqueue_hrtimer+0x34/0x190
__run_hrtimer+0x3c8/0x4c0
__hrtimer_run_queues+0x1b2/0x260
hrtimer_interrupt+0x316/0x760
do_IRQ+0x9a/0xe0
do_irq_async+0xf6/0x160
Normally a raw_spinlock to spinlock dependency is not legitimate
and will be warned if CONFIG_PROVE_RAW_LOCK_NESTING is enabled,
but debug_objects_fill_pool() is an exception as it explicitly
allows this dependency for non-PREEMPT_RT kernel without causing
PROVE_RAW_LOCK_NESTING lockdep splat. As a result, this dependency is
legitimate and not a bug.
Anyway, semaphore is the only locking primitive left that is still
using try_to_wake_up() to do wakeup inside critical section, all the
other locking primitives had been migrated to use wake_q to do wakeup
outside of the critical section. It is also possible that there are
other circular locking dependencies involving printk/console_sem or
other existing/new semaphores lurking somewhere which may show up in
the future. Let just do the migration now to wake_q to avoid headache
like this.
Reported-by: yzbot+ed801a886dfdbfe7136d@syzkaller.appspotmail.com
Signed-off-by: Waiman Long <longman@redhat.com>
Signed-off-by: Boqun Feng <boqun.feng@gmail.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lore.kernel.org/r/20250307232717.1759087-3-boqun.feng@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9a267ce4a3 ]
When MLO is used and SA Query processing isn't done by
userspace (e.g. wpa_supplicant w/o CONFIG_OCV), then
the mac80211 code kicks in but uses the wrong addresses.
Fix them.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Reviewed-by: Ilan Peer <ilan.peer@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250306123626.bab48bb49061.I9391b22f1360d20ac8c4e92604de23f27696ba8f@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 43e0407717 ]
We first want to flush the station to make sure we no longer have any
frames being Tx by the station before the station is moved to
un-authorized state. Failing to do that will lead to races: a frame may
be sent after the station's state has been changed.
Since the API clearly states that the driver can't fail the sta_state()
transition down the list of state, we can easily flush the station
first, and only then call the driver's sta_state().
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250306123626.450bc40e8b04.I636ba96843c77f13309c15c9fd6eb0c5a52a7976@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 927e6bec5c ]
"generic_new_peripheral_assigned: invalid dev_num 1, wake supported 1"
is reported by our internal CI test.
Rt1320's wake feature is not used in Linux and that's why it is not in
the wake_capable_list[] list in intel_auxdevice.c.
However, BIOS may set it as wake-capable. Overwrite wake_capable to 0
in the codec driver to align with wake_capable_list[].
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Acked-by: Shuming Fan <shumingf@realtek.com>
Link: https://patch.msgid.link/20250305134113.201326-1-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d776f016d2 ]
Temperatures are reported in units of Celsius however hwmon expects
values to be in millidegree of Celsius. Userspace tools observe values
close to zero and report it as "Not available" or incorrect values like
0C or 1C. Add a simple conversion to fix that.
Before the change:
wsa884x-virtual-0
Adapter: Virtual device
temp1: +0.0°C
--
wsa884x-virtual-0
Adapter: Virtual device
temp1: +0.0°C
Also reported as N/A before first amplifier power on.
After this change and initial wsa884x power on:
wsa884x-virtual-0
Adapter: Virtual device
temp1: +39.0°C
--
wsa884x-virtual-0
Adapter: Virtual device
temp1: +37.0°C
Tested on sm8550 only.
Cc: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Cc: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Alexey Klimov <alexey.klimov@linaro.org>
Link: https://patch.msgid.link/20250221044024.1207921-1-alexey.klimov@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 59115e2e25 ]
For Linux, running in Hyper-V VTL (Virtual Trust Level), kernel in VTL2
tries to access VTL0 low memory in probe_roms. This memory is not
described in the e820 map. Initialize probe_roms call to no-ops
during boot for VTL2 kernel to avoid this. The issue got identified
in OpenVMM which detects invalid accesses initiated from kernel running
in VTL2.
Co-developed-by: Saurabh Sengar <ssengar@linux.microsoft.com>
Signed-off-by: Saurabh Sengar <ssengar@linux.microsoft.com>
Signed-off-by: Naman Jain <namjain@linux.microsoft.com>
Tested-by: Roman Kisel <romank@linux.microsoft.com>
Reviewed-by: Roman Kisel <romank@linux.microsoft.com>
Link: https://lore.kernel.org/r/20250116061224.1701-1-namjain@linux.microsoft.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Message-ID: <20250116061224.1701-1-namjain@linux.microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 14672f059d ]
The ftrace selftest reported a failure because writing -1 to
sched_rt_runtime_us returns -EBUSY. This happens when the possible
CPUs are different from active CPUs.
Active CPUs are part of one root domain, while remaining CPUs are part
of def_root_domain. Since active cpumask is being used, this results in
cpus=0 when a non active CPUs is used in the loop.
Fix it by looping over the online CPUs instead for validating the
bandwidth calculations.
Signed-off-by: Shrikanth Hegde <sshegde@linux.ibm.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Juri Lelli <juri.lelli@redhat.com>
Link: https://lore.kernel.org/r/20250306052954.452005-2-sshegde@linux.ibm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c86dd79a7c ]
Add support for ASUS B5605CCA and B5405CCA.
Laptops use 2 CS35L41 Amps with HDA, using Internal boost, with SPI
Signed-off-by: Stefan Binding <sbinding@opensource.cirrus.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20250305170714.755794-7-sbinding@opensource.cirrus.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 859a119170 ]
Add support for ASUS B3405CVA, B5405CVA, B5605CVA, B3605CVA.
Laptops use 2 CS35L41 Amps with HDA, using Internal boost, with SPI
Signed-off-by: Stefan Binding <sbinding@opensource.cirrus.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20250305170714.755794-5-sbinding@opensource.cirrus.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9120b2b4ad ]
Add support for ASUS G614PH/PM/PP and G614FH/FM/FP.
Laptops use 2 CS35L41 Amps with HDA, using Internal boost, with I2C
Signed-off-by: Stefan Binding <sbinding@opensource.cirrus.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20250305170714.755794-4-sbinding@opensource.cirrus.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 16dc157346 ]
Add support for ASUS GA603KP, GA603KM and GA603KH.
Laptops use 2 CS35L41 Amps with HDA, using Internal boost, with I2C
Signed-off-by: Stefan Binding <sbinding@opensource.cirrus.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20250305170714.755794-3-sbinding@opensource.cirrus.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f2c11231b5 ]
Add support for ASUS G814PH/PM/PP and G814FH/FM/FP.
Laptops use 2 CS35L41 Amps with HDA, using Internal boost, with I2C.
Signed-off-by: Stefan Binding <sbinding@opensource.cirrus.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20250305170714.755794-2-sbinding@opensource.cirrus.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 13940cef95 ]
Add a check for invalid data size to avoid corrupted filesystem
from being further corrupted.
Signed-off-by: Yuezhang Mo <Yuezhang.Mo@sony.com>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 376a8c2a14 ]
The PMF driver allocates a shared memory buffer using
tee_shm_alloc_kernel_buf() for communication with the PMF-TA.
The latest PMF-TA version introduces new structures with OEM debug
information and additional policy input conditions for evaluating the
policy binary. Consequently, the shared memory size must be increased to
ensure compatibility between the PMF driver and the updated PMF-TA.
To do so, introduce the new PMF-TA UUID and update the PMF shared memory
configuration to ensure compatibility with the latest PMF-TA version.
Additionally, export the TA UUID.
These updates will result in modifications to the prototypes of
amd_pmf_tee_init() and amd_pmf_ta_open_session().
Link: https://lore.kernel.org/all/55ac865f-b1c7-fa81-51c4-d211c7963e7e@linux.intel.com/
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Co-developed-by: Patil Rajesh Reddy <Patil.Reddy@amd.com>
Signed-off-by: Patil Rajesh Reddy <Patil.Reddy@amd.com>
Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Link: https://lore.kernel.org/r/20250305045842.4117767-2-Shyam-sundar.S-k@amd.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9ba93cb821 ]
In the amd_pmf_invoke_cmd_init() function within the PMF driver ensure
that the actual result from the PMF-TA is returned rather than a generic
EIO. This change allows for proper handling of errors originating from the
PMF-TA.
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Co-developed-by: Patil Rajesh Reddy <Patil.Reddy@amd.com>
Signed-off-by: Patil Rajesh Reddy <Patil.Reddy@amd.com>
Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Link: https://lore.kernel.org/r/20250305045842.4117767-1-Shyam-sundar.S-k@amd.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 723aa55c08 ]
We have two places to print "failed to set a report to ...",
use "get a report from" instead of "set a report to", it makes
people who knows less about the module to know where the error
happened.
Before:
i2c_hid_acpi i2c-FTSC1000:00: failed to set a report to device: -11
After:
i2c_hid_acpi i2c-FTSC1000:00: failed to get a report from device: -11
Signed-off-by: Wentao Guan <guanwentao@uniontech.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
