In case of an upgrade from four to five level page tables, and a failing
pgd allocation, the exit path of crst_table_upgrade() would incorrectly
dereference the p4d NULL pointer via pagetable_dtor().
Address this by reworking crst_table_upgrade(), which basically is a
revert of [1]. Take into account that GFP_KERNEL order-2 allocation
failures are very unlikely. Therefore keep the code as simple as
possible:
In case of an upgrade from three to five levels, and an allocation
failure of the fifth page table level, keep the upgrade to four levels
instead of reverting back to three levels. This allows to keep error
handling minimal.
[1] commit 31932757c6 ("s390/mm: optimize page table upgrade routine")
Reviewed-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
The facilities and debug-alternative command line parsers iterate over
inclusive numeric ranges. If a range ends at ULONG_MAX, incrementing the
current value wraps to zero and the loop never terminates. Large finite
out-of-range values also cause unnecessary early boot iterations even
though the bitmap helpers ignore them.
Stop each loop at the size of the bitmap it modifies. This preserves all
meaningful range values while guaranteeing termination.
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
A command line may occupy all but the terminating byte of
COMMAND_LINE_SIZE. In that case append_ipl_block_parm() passes a zero size
to the IPL parameter conversion helpers and points the destination one
byte past early_command_line. The helpers subtract one from the unsigned
size and write the converted parameter outside the command line buffer.
Convert the IPL parameter in the command line parsing buffer first. A
parameter beginning with '=' can then replace the existing command line
regardless of its length, while other parameters are appended only when
space remains.
Fixes: 5ecb2da660 ("s390: support command lines longer than 896 bytes")
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
search_mem_end() calculates the number of 1MB blocks with a signed int
literal. CONFIG_MAX_PHYSMEM_BITS values of 51 and above either overflow
the signed int or shift beyond its width. This produces an invalid search
range when the binary-search memory detection fallback is used.
Use an unsigned long literal so the full supported physical address range
is represented.
Fixes: 54c57795e8 ("s390/mem_detect: replace tprot loop with binary search")
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
The Audient iD24 (2708:000d) exposes feature unit 12 as a 4-channel
"Speaker Playback Volume" control (cmask 0xf, -127..0 dB). The device
does not actually apply this volume to all of its output channels: the
left main output ignores it and stays at 0 dB, while the right main
output honors it.
When userspace (PulseAudio / PipeWire in a stereo profile) adopts this
control as the master playback volume, any setting below maximum
produces a stereo imbalance on the main outputs.
This was verified against the device's internal meters: with the
control set to 107/127 (-20 dB) on all four channels and a digitally
identical L/R sine played back, both DAW return meters read the same
level while the right main output metered exactly 20 dB below the
left. Restoring the control to 127 (0 dB) restored the balance.
Rename the control to "Monitor Mix Playback" so that it is not picked
up as the stream's master volume control, in line with similar quirks
for other devices. The control remains accessible for manual use.
Signed-off-by: Peter Drabik <drabik.p@gmail.com>
Link: https://patch.msgid.link/20260831195855.1836617-1-drabik.p@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Before commit 7639a06c23 ("ALSA: hda - Move a part of hda_codec stuff
into hdac_device"), widget enumeration selected the function group with
codec->afg ? codec->afg : codec->mfg
and read subordinate nodes from that group.
The core split moved this logic into snd_hdac_refresh_widgets(), but
hard-coded codec->afg there. For an MFG-only codec, codec->afg is zero,
so the Root Node is queried and codec->start_nid/num_nodes are populated
from the function-group range instead of the MFG's subordinate nodes.
Restore the pre-split AFG-or-MFG selection.
Fixes: 7639a06c23 ("ALSA: hda - Move a part of hda_codec stuff into hdac_device")
Signed-off-by: Xu Rao <raoxu@uniontech.com>
Link: https://patch.msgid.link/44809B8FF80DCCA2+20260901034024.2407783-1-raoxu@uniontech.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The snd_usbmidi_us122l_output() picks a count of 2 on anything slower
than high speed and never relates it to ep->max_transfer. The URB
buffer holds exactly max_transfer bytes, so a device declaring a one
byte bulk endpoint takes two bytes from snd_rawmidi_transmit(), and the
memset that pads the rest computes 1 - 2 in int and wraps to SIZE_MAX.
Only 0x800e and 0x800f are pinned to nine bytes. The US-122MKII at
0x0644:0x8021 falls to the default and takes usb_maxpacket(), which the
USB core only clamps downward.
The akai and novation output ops in this file were given the same guard
recently. Do the same here.
Fixes: 030a07e441 ("ALSA: Add USB US122L driver")
Cc: stable@vger.kernel.org
Assisted-by: Claude:claude-opus-5
Signed-off-by: HyeongJun An <sammiee5311@gmail.com>
Link: https://patch.msgid.link/20260901090409.1478573-1-sammiee5311@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Several fields in bonding are read locklessly using READ_ONCE()
(or ACCESS_ONCE() previously) but have corresponding writes that
do not use WRITE_ONCE().
Add WRITE_ONCE() annotations to:
- bond->send_peer_notif decrements in bond_peer_notify_may_events()
and reset in bond_close().
- bond->slave_cnt increments and decrements in bond_enslave() and
__bond_release_one().
- bond->recv_probe updates in bond_open(), bond_option_arp_interval_set()
and rlb_initialize().
- slaves->count decrement in bond_skip_slave().
Fixes: 4d97480b18 ("bonding: use local function pointer of bond->recv_probe in bond_handle_frame")
Fixes: 9a72c2da69 ("bonding: fix div by zero while enslaving and transmitting")
Fixes: ee63771474 ("bonding: Simplify the xmit function for modes that use xmit_hash")
Fixes: 429208aab9 ("net: bonding: add the READ_ONCE/WRITE_ONCE for outside lock accessing")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Jay Vosburgh <jv@jvosburgh.net>
Reviewed-by: Xuanqiang Luo<luoxuanqiang@kylinos.cn>
Reviewed-by: Hangbin Liu <liuhangbin@kylinos.cn>
Link: https://patch.msgid.link/20260831081027.3209554-1-edumazet@google.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
mr_check_range() validates that [iova, iova+length) falls within the
registered MR range using wraparound-prone arithmetic:
if (iova < mr->ibmr.iova ||
iova + length > mr->ibmr.iova + mr->ibmr.length)
A remote peer can craft an RDMA-Write/Read RETH so that iova + length
wraps to 0 (e.g. iova=0xfffffffffffffff8, length=8), bypassing the
check. rxe_mr_iova_to_index() then computes a huge index (int idx, only
guarded by WARN_ON) and rxe_mr_copy_xarray() dereferences
mr->page_info[huge], causing an out-of-bounds read/write and a kernel
oops that is triggerable by an unauthenticated remote peer.
Rewrite the check in overflow-safe form; the first two clauses guarantee
that the subsequent subtractions do not underflow:
if (iova < mr->ibmr.iova ||
length > mr->ibmr.length ||
iova - mr->ibmr.iova > mr->ibmr.length - length)
With the fix, mr_check_range() returns -EINVAL for the crafted iova and
the responder reports REMOTE_ACCESS_ERROR instead of triggering the OOB.
Fixes: 8700e3e7c4 ("Soft RoCE driver")
Signed-off-by: Gang Yan <yangang@kylinos.cn>
Link: https://patch.msgid.link/20260814093740.292954-1-gang.yan@linux.dev
Reviewed-by: Zhu Yanjun <yanjun.zhu@linux.dev>
Reviewed-by: Shukai Ni <shukai.ni@kuleuven.be>
Tested-by: Shukai Ni <shukai.ni@kuleuven.be>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
rtw_restruct_wmm_ie() scans in_ie for a WMM IE with:
while (i < in_len) {
...
if (i + 5 < in_len && in_ie[i] == 0xDD && ...) {
...
break;
}
i += (in_ie[i + 1] + 2); /* to the next IE element */
}
When the "i + 5 < in_len" match check fails simply because i is
within 5 bytes of the end of the buffer (i.e. no WMM IE was found
near the tail of in_ie), execution falls through to
"i += (in_ie[i + 1] + 2)", which reads in_ie[i + 1]. If i == in_len
- 1 at that point, this is a 1-byte out-of-bounds read of an
attacker-influenced IE buffer built from association/scan data.
Commit a75281626f ("staging: rtl8723bs: fix potential
out-of-bounds read in rtw_restruct_wmm_ie") added the "i + 5 <
in_len" guard to the match condition itself, but did not add an
equivalent guard before the fallthrough advance, so the same class
of OOB read remained reachable through the non-matching path.
Add an explicit bounds check before advancing to the next IE.
Fixes: 554c0a3abf ("staging: Add rtl8723bs sdio wifi driver")
Cc: stable@vger.kernel.org
Signed-off-by: Muhammad Bilal <meatuni001@gmail.com>
Link: https://patch.msgid.link/20260728125456.32359-4-meatuni001@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
rtw_action_frame_parse() takes a frame_len parameter but never
actually checks it before indexing into the frame body:
const u8 *frame_body = frame + sizeof(struct ieee80211_hdr_3addr);
...
c = frame_body[0];
...
a = frame_body[1];
frame_body already points 24 bytes (sizeof(struct
ieee80211_hdr_3addr)) into frame, so reading frame_body[0] and
frame_body[1] requires frame_len >= 26. A management action frame
shorter than that (e.g. exactly 24 bytes, the minimum a malicious
peer can send) causes a 1-2 byte out-of-bounds read.
This is reachable from rtw_cfg80211_monitor_if_xmit_entry() and
cfg80211_rtw_mgmt_tx() in ioctl_cfg80211.c, both of which pass
attacker/user-influenced frame buffers and lengths straight through.
Add the missing length check before frame_body is dereferenced.
Fixes: 554c0a3abf ("staging: Add rtl8723bs sdio wifi driver")
Cc: stable@vger.kernel.org
Signed-off-by: Muhammad Bilal <meatuni001@gmail.com>
Link: https://patch.msgid.link/20260728125456.32359-3-meatuni001@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
rtw_get_wps_attr() walks WPS attributes inside a WPS IE taken from
a wireless management frame. For each candidate attribute it only
checks that the fixed 4-byte attribute header (2-byte ID + 2-byte
length) fits inside the IE:
if (attr_ptr + 4 > wps_ie + wps_ielen)
break;
u16 attr_id = get_unaligned_be16(attr_ptr);
u16 attr_data_len = get_unaligned_be16(attr_ptr + 2);
u16 attr_len = attr_data_len + 4;
attr_data_len (and therefore attr_len) is read directly from the
wire and is never checked against the remaining bytes in the IE
before being used as the size of:
memcpy(buf_attr, attr_ptr, attr_len);
Since attr_len is fully attacker controlled (0 to 65535+4), this is
both a heap OOB read of wps_ie, and, more seriously, a stack buffer
overflow at several call sites where buf_attr is a single-byte
stack variable, e.g. rtw_get_wps_attr_content()'s callers passing
WPS_ATTR_SELECTED_REGISTRAR into a stack "u8 sr"/"u8
selected_registrar" (drivers/staging/rtl8723bs/os_dep/ioctl_cfg80211.c,
drivers/staging/rtl8723bs/core/rtw_mlme_ext.c). A crafted WPS IE in a
beacon or probe response processed during scanning can therefore
smash the stack of the parsing thread.
rtw_get_wps_attr_content() itself has no independent length check
and simply trusts the attr_len it gets back from rtw_get_wps_attr(),
so fixing the bound here also fixes that caller.
The "attr_ptr + 4 > wps_ie + wps_ielen" header check above was added
by commit 1463ca3ec6 ("staging: rtl8723bs: fix OOB reads in
rtw_get_sec_ie(), rtw_get_wapi_ie(), and rtw_get_wps_attr()"), which
bounded the fixed header but never extended the check to cover the
variable-length attribute data that follows it. Add that missing
check before attr_len is used as a memcpy() length or accepted as a
match.
Fixes: 554c0a3abf ("staging: Add rtl8723bs sdio wifi driver")
Cc: stable@vger.kernel.org
Signed-off-by: Muhammad Bilal <meatuni001@gmail.com>
Link: https://patch.msgid.link/20260728125456.32359-2-meatuni001@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
fbtft_mkdirty() can be reached from the fbcon rendering path while
processing printk() in hardirq context. Meanwhile, dirty_lock is also
taken by fbtft_deferred_io() in workqueue context with local interrupts
enabled.
Lockdep reports a possible IRQ lock inversion involving dirty_lock and
console_owner. A hardirq can interrupt a CPU holding dirty_lock and
enter the console rendering path, which can attempt to acquire
dirty_lock again.
The following lockdep report was observed on an RK3566 system with
CONFIG_PROVE_LOCKING enabled:
WARNING: possible irq lock inversion dependency detected
swapper/2/0 just changed the state of lock:
(console_owner){-...}-{0:0}
but this lock took another, HARDIRQ-unsafe lock in the past:
(&par->dirty_lock){+.+.}-{2:2}
CPU0 CPU1
---- ----
lock(&par->dirty_lock);
local_irq_disable();
lock(console_owner);
lock(&par->dirty_lock);
<Interrupt>
lock(console_owner);
*** DEADLOCK ***
Use spin_lock_irqsave() for fbtft_mkdirty() and spin_lock_irq() for
fbtft_deferred_io(). They only access the dirty line range, so the
IRQ-off regions remain short.
Fixes: c296d5f995 ("staging: fbtft: core support")
Signed-off-by: Hui Su <sh_def@163.com>
Link: https://lore.kernel.org/lkml/20260804173712.176017-1-sh_def@163.com/
Reviewed-by: Nam Cao <namcao@linutronix.de>
Link: https://patch.msgid.link/20260807150953.2811933-3-sh_def@163.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
rxe_rereg_user_mr() reassigns mr->ibmr.pd first and only then
validates the IB_MR_REREG_ACCESS argument:
if (flags & IB_MR_REREG_PD) {
rxe_put(old_pd);
rxe_get(pd);
mr->ibmr.pd = ibpd;
}
if (flags & IB_MR_REREG_ACCESS) {
if (access & ~RXE_ACCESS_SUPPORTED_MR)
return ERR_PTR(-EOPNOTSUPP);
mr->access = access;
}
Both flags pass the entry check because RXE_MR_REREG_SUPPORTED is
IB_MR_REREG_PD | IB_MR_REREG_ACCESS, so a caller can reach the access
check with mr->ibmr.pd already reassigned.
mr->ibmr.pd is owned by the core, which adjusts pd->usecnt only on the
success path: ib_uverbs_rereg_mr() jumps to put_new_uobj on a driver error
without undoing the reassignment, so mr->pd == new_pd while the usecnts
still charge the MR to orig_pd. ib_dereg_mr_user() then decrements
new_pd, whose count can reach zero while a memory window still references
it; uverbs_free_pd() frees the PD on that count alone and rxe_mw_cleanup()
writes to freed memory:
BUG: KASAN: slab-use-after-free in __rxe_put+0x31/0xa0
Write of size 4 at addr ffff8881301dd690 by task rxe_poc/591
__rxe_put+0x31/0xa0
rxe_mw_cleanup+0x42/0x200
__rxe_cleanup+0x115/0x370
rxe_dealloc_mw+0x4c/0x80
Allocated by task 591:
ib_uverbs_alloc_pd+0x258/0x540
Freed by task 591:
ib_dealloc_pd_user+0x174/0x210
uverbs_free_pd+0x8d/0xc0
ib_uverbs_dealloc_pd+0x18e/0x1d0
Validate the access flags before mutating any state so the callback either
applies every requested change or none.
Fixes: 544c7f62cf ("RDMA/rxe: Implement rereg_user_mr")
Signed-off-by: Norbert Szetei <norbert@doyensec.com>
Link: https://patch.msgid.link/46E1D5C0-24BE-4D01-BDB3-634FE09B22C5@doyensec.com
Reviewed-by: Zhu Yanjun <yanjun.zhu@linux.dev>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
local->assoc_dev is shared between the association path and the
association-response worker without common synchronization.
mac802154_perform_association() stores the coordinator pointer and waits
for a response. Its timeout and error paths clear the pointer and return
to mac802154_associate(), which may then free the coordinator object.
Meanwhile, mac802154_rx_mac_cmd_worker() may observe the associating bit
and enter mac802154_process_association_resp(), which dereferences
assoc_dev.
The worker's bit test and the handler's pointer dereference are not
atomic with respect to cleanup. Cleanup can clear assoc_dev between them,
causing a NULL dereference, or free the coordinator while the response
handler still uses the pointer.
The recorded result is exposed to the same window. assoc_status and
assoc_addr are written by the handler but read by the association path
while the associating bit is still set, so a second response for the same
request - a malicious one, for instance - can replace them between those
reads and leave the caller with an incoherent status and address pair.
The response handler only needs the coordinator extended address.
Replace assoc_dev with a cached address, removing the pointer lifetime
dependency. Protect the cached address and the associating bit with a
dedicated spinlock. A READ_ONCE()/WRITE_ONCE() pair would not guarantee
an atomic __le64 access on all 32-bit architectures.
wpan_dev->association_lock cannot be reused here: nl802154_associate()
holds it across rdev_associate(), hence for the whole of
mac802154_perform_association() including the wait for the response.
A response handler taking that lock would only get it once the
association has already given up.
Reset the completion, publish the cached address, and set the associating
bit while holding the lock. The response handler takes the lock, rechecks
the bit and the cached address, records the response, clears the bit, and
only then completes the waiter. Thus cleanup cannot pass the handler
between its state check and completion, and the cached 64-bit value
cannot tear.
The handler clears the bit before completing, not the woken waiter:
otherwise complete() is issued under the lock and a second (e.g.
malicious) response can reacquire it before the waiter and replace the
result. So a wait that returns success implies the bit is already clear,
and the success and negative-response paths return directly. The
transmit-error and timeout paths still clear it under assoc_lock, which
serializes any racing response against the cleanup while the call returns
the error it already selected. Both paths snapshot assoc_status and
assoc_addr under the same lock.
Both users run in process context, so a plain spinlock is sufficient.
The lock is not held while waiting for the completion.
Suggested-by: Miquel Raynal <miquel.raynal@bootlin.com>
Suggested-by: Xuanqiang Luo <xuanqiang.luo@linux.dev>
Fixes: fefd19807f ("mac802154: Handle associating")
Cc: stable@vger.kernel.org
Signed-off-by: Kaiwen Shi <skwkevin@mail.ustc.edu.cn>
Reviewed-by: Xuanqiang Luo <luoxuanqiang@kylinos.cn>
Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://patch.msgid.link/20260829230551.1787432-1-skwkevin@mail.ustc.edu.cn
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
nouveau_dmem_folio_free() drops chunk->callocated once per freed folio,
while a large (compound) device-private folio is only counted once when
it is allocated. When such a folio is split, the mm core invokes
->folio_split() (nouveau_dmem_folio_split()) once for each new
sub-folio, but the hook only fixes up the sub-folio metadata and leaves
chunk->callocated unchanged.
Each resulting sub-folio is later freed separately, so after a split
the single allocation (+1) is met by N frees (-N), leaving
chunk->callocated short by N-1. On the first split/free cycle it
underflows: WARN_ON(!chunk->callocated) fires, the unsigned counter
wraps and never returns to zero, so the chunk can no longer be
reclaimed (nouveau_dmem_fini() also warns on the leaked count).
Account for the new sub-folio in the split hook, under the same lock as
nouveau_dmem_folio_free(), so the count stays balanced.
Fixes: c322874710 ("gpu/drm/nouveau: enable THP support for GPU memory migration")
Reported-by: Yuhao Jiang <danisjiang@gmail.com>
Assisted-by: Claude:claude-opus-5
Cc: stable@vger.kernel.org
Signed-off-by: Zhenhao Wan <whi4ed0g@gmail.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Link: https://patch.msgid.link/20260811-b4-nouveau-dmem-thp-fixes-v1-2-2cdf9860af2a@gmail.com
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
Device-private THP migration maps migration buffers with page_size()
and records that length in dma_info->size. For a compound folio
page_size() is PAGE_SIZE << order, but two teardown sites still pass a
literal PAGE_SIZE to dma_unmap_page():
- nouveau_dmem_migrate_to_ram() on the success path, and
- nouveau_dmem_migrate_copy_one() on the copy-error path.
For an order > 0 folio this unmaps less than was mapped, leaking the
remainder of the IOMMU/IOVA mapping. The other unmap sites, in
nouveau_dmem_migrate_chunk() and nouveau_dmem_evict_chunk(), already
use the saved size; use it here too.
Fixes: c322874710 ("gpu/drm/nouveau: enable THP support for GPU memory migration")
Reported-by: Yuhao Jiang <danisjiang@gmail.com>
Assisted-by: Claude:claude-opus-5
Cc: stable@vger.kernel.org
Signed-off-by: Zhenhao Wan <whi4ed0g@gmail.com>
Link: https://patch.msgid.link/20260811-b4-nouveau-dmem-thp-fixes-v1-1-2cdf9860af2a@gmail.com
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
Turns out sashiko was right, and I should protect this properly
Fixes: 34e27b9055 ("nouveau/instmem: use iomapping interface for instmem handling")
Signed-off-by: Dave Airlie <airlied@redhat.com>
Link: https://patch.msgid.link/20260825030615.3464436-1-airlied@gmail.com
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
A successful OP_UNMAP_SPARSE marks its region dirty with
nouveau_uvma_region_dirty() and defers the teardown to
nouveau_uvmm_bind_job_cleanup(); it does not remove the region from
uvmm->region_mt.
If a later op in the job fails, the unwind path never clears reg->dirty
(set in one place, cleared nowhere) and sets op->reg = NULL, so cleanup
skips the teardown. The region is left in the tree with dirty set and its
completion never signalled. Later binds over that range then fail
permanently -- -ENOENT or -EINVAL from the dirty checks, or an unkillable
wait_for_completion() in bind_validate_region() -- for the lifetime of
the uvmm.
Clear reg->dirty when the unwind reverts the sparse unmap, restoring the
region to the state it was found in.
Fixes: b88baab828 ("drm/nouveau: implement new VM_BIND uAPI")
Reported-by: Yuhao Jiang <danisjiang@gmail.com>
Assisted-by: Claude:claude-opus-5
Cc: stable@vger.kernel.org
Signed-off-by: Zhenhao Wan <whi4ed0g@gmail.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Link: https://patch.msgid.link/20260811-nouveau-uvmm-vmbind-fixes-v2-3-aaee4b395d04@gmail.com
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
In nouveau_uvmm_bind_job_submit()'s OP_UNMAP_SPARSE arm, op->reg is set
from nouveau_uvma_region_find(), which only looks the region up and takes
no reference; a region's sole reference is its membership in
uvmm->region_mt. Two failure paths leave op->reg set: the -ENOENT check
when the region is busy, and the drm_gpuvm_sm_unmap_ops_create() failure.
The sibling nouveau_uvmm_sm_unmap_prepare() failure just below clears
op->reg; these two do not.
unwind_continue steps back one op, so the failing op is skipped by the
unwind loop and its op->reg stays set. nouveau_uvmm_bind_job_cleanup()
then enters its if (op->reg) branch and calls nouveau_uvma_region_remove()
and nouveau_uvma_region_put() on it, dropping the tree's sole reference
and freeing a region this job never created. The comment above the
cleanup loop documents the broken invariant: op->reg must be NULL on
submit failure.
This frees a live region on an unrelated failure, reachable single-job
when drm_gpuvm_sm_unmap_ops_create() returns -ENOMEM; if another job owns
the same region, its cleanup then removes and puts the freed region, a
use-after-free. Clear op->reg on both failure paths.
Fixes: b88baab828 ("drm/nouveau: implement new VM_BIND uAPI")
Reported-by: Yuhao Jiang <danisjiang@gmail.com>
Assisted-by: Claude:claude-opus-5
Cc: stable@vger.kernel.org
Signed-off-by: Zhenhao Wan <whi4ed0g@gmail.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Link: https://patch.msgid.link/20260811-nouveau-uvmm-vmbind-fixes-v2-2-aaee4b395d04@gmail.com
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
Each bind_job_op is zeroed by kzalloc_obj() in bind_job_op_from_uop(),
and the OP_MAP_SPARSE case in nouveau_uvmm_bind_job_submit() only creates
a region, so op->ops stays NULL for a successfully processed sparse map.
If a later op in the same job fails, the reverse unwind loop revisits that
op and calls drm_gpuva_ops_free(&uvmm->base, op->ops) unconditionally.
drm_gpuva_ops_free() dereferences its argument right away
(list_for_each_entry_safe on &ops->list), so a NULL op->ops oopses. The
path is reachable by any render-node fd holder, since NOUVEAU_VM_BIND is
DRM_RENDER_ALLOW.
Guard the free with IS_ERR_OR_NULL(), as nouveau_uvmm_bind_job_cleanup()
already does for the identical free.
Fixes: b88baab828 ("drm/nouveau: implement new VM_BIND uAPI")
Reported-by: Yuhao Jiang <danisjiang@gmail.com>
Assisted-by: Claude:claude-opus-5
Cc: stable@vger.kernel.org
Signed-off-by: Zhenhao Wan <whi4ed0g@gmail.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Link: https://patch.msgid.link/20260811-nouveau-uvmm-vmbind-fixes-v2-1-aaee4b395d04@gmail.com
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
We need to clear cep before release state_lock as siw_qp_llp_close and
siw_qp_modify->siw_qp_llp_close did.
Otherwise if siw_qp_modify() fails in siw_accept(), the QP's state_lock
is released before the error path cleanup. A concurrent ibv_modify_qp()
transitioning the QP to ERROR can race in this window:
siw_accept() ibv_modify_qp(ERROR)
---------------------- ----------------------
siw_qp_modify() fails
up_write(&qp->state_lock)
down_write(&qp->state_lock)
nextstate_from_idle():
if (qp->cep)
siw_cep_put(qp->cep) <- frees cep
qp->cep = NULL
goto error
cep->qp = NULL <- UAF
Clear qp->cep and drop the association reference taken by siw_cep_get(),
all under the write lock held from the initial down_write(&qp->state_lock).
Thread B therefore sees qp->cep == NULL, skips its own put, and cannot free
the cep before siw_accept() is done with it.
Fixes: 6c52fdc244 ("rdma/siw: connection management")
Reported-by: Shuangpeng Bai <shuangpeng.kernel@gmail.com>
Link: https://lore.kernel.org/linux-rdma/d6fbe475-a5c2-f975-99b0-a0bd6b6d10e8@linux.dev/T/#m5876c1ff2de8686a9a1173b8f1aa0ff5363a785c
Signed-off-by: Guoqing Jiang <guoqing.jiang@linux.dev>
Link: https://patch.msgid.link/20260827125553.12831-1-guoqing.jiang@linux.dev
Acked-by: Bernard Metzler <bernard.metzler@linux.dev>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Zoned block devices do not support partitions. However, the partition
table is nevertheless still inspected, and any partition found ignored
with a warning in add_partition(). While this is generally not a problem,
and in fact beneficial to the user as it indicates an invalid use of a
zoned block device, scanning for a partition table on the device may
result in issuing read operations to offline zones (e.g. after a disk head
is depopulated for disks that support head management operations).
Since partitions are ignored anyway, completely disable partition scanning
for zoned gendisks by setting the flag GENHD_FL_NO_PART in __add_disk().
The existing check in add_partition() is left as-is to ensure that we
still get a warning if for whatever reason, despite GENHD_FL_NO_PART, we
still endup trying to add partitions.
Flagging zoned disks with GENHD_FL_NO_PART also has the benefit to expose
through sysfs the ext_range attribute with the value of 1 instead of the
default DISK_MAX_PARTS, thus correctly advertizing the fact that zoned
disks do not support partitions.
Fixes: 5eac3eb30c ("block: Remove partition support for zoned block devices")
Cc: stable@vger.kernel.org
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Hannes Reinecke <hare@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Link: https://patch.msgid.link/20260831025050.667758-1-dlemoal@kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
access to hardware
- Remove the unused fake error injection interface from the EDAC debugfs
code due to potential races between logging a fake and a real hw error
- edac_mc_sysfs: Use sysfs_emit_at() for proper bounds checking
- Remove Mark Gross from maintainer entries and move him to CREDITS
- Load the AMD address translation library only on systems which can
actually make use of it (have ECC memory) instead of on every AMD Zen
system out there
- In edac_altera, detect the SoC variant using the ECC manager's
compatible string instead of the build architecture to select the
correct interrupt layout, and remove leftover architecture-specific
ifdeffery from the double-bit error handling path
- Add a new reviewer for the Xilinx EDAC drivers
- Unify address translation logic in Intel client EDAC drivers igen6 and
ie31200 along with detecting memory controller counts at boot time
instead of relying on hardcoded, platform specific numbers. Also, fix
a bunch of issues in them; work by Qiuxu Zhuo
- Add support for a new Intel processor platform Starfire which is
a derivative of Panther Lake SoCs
- The usual cleanups and fixlets all over
-----BEGIN PGP SIGNATURE-----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=t886
-----END PGP SIGNATURE-----
Merge tag 'edac_updates_for_v7.3_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras
Pull forgotten EDAC updates from Borislav Petkov:
"Somewhat belated (and forgotten :-\) EDAC updates lineup for v7.3:
- Mark the mpc85xx and ThunderX EDAC drivers as orphaned due to lack
of access to hardware
- Remove the unused fake error injection interface from the EDAC
debugfs code due to potential races between logging a fake and a
real hw error
- edac_mc_sysfs: Use sysfs_emit_at() for proper bounds checking
- Remove Mark Gross from maintainer entries and move him to CREDITS
- Load the AMD address translation library only on systems which can
actually make use of it (have ECC memory) instead of on every AMD
Zen system out there
- In edac_altera, detect the SoC variant using the ECC manager's
compatible string instead of the build architecture to select the
correct interrupt layout, and remove leftover architecture-specific
ifdeffery from the double-bit error handling path
- Add a new reviewer for the Xilinx EDAC drivers
- Unify address translation logic in Intel client EDAC drivers igen6
and ie31200 along with detecting memory controller counts at boot
time instead of relying on hardcoded, platform specific numbers.
Also, fix a bunch of issues in them; work by Qiuxu Zhuo
- Add support for a new Intel processor platform Starfire which is a
derivative of Panther Lake SoCs
- The usual cleanups and fixlets all over"
* tag 'edac_updates_for_v7.3_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras: (24 commits)
EDAC/thunderx: Orphan it
EDAC/device_sysfs: Cleanup around edac_device_ctl_poll_msec_store()
EDAC/device_sysfs: Use kstrtouint() for poll_msec to prevent truncation
EDAC/igen6: Add Intel Starfire SoCs support
EDAC/igen6: Refactor address translation logic
EDAC/igen6: Remove redundant resource configuration tables
EDAC/igen6: Detect present memory controllers at runtime
EDAC/igen6: Simplify compute die ID comments
EDAC/igen6: Remove unnecessary XOR on the zero-valued interleave bit
EDAC/igen6: Fix Raptor Lake-P logged error address
EDAC/igen6: Fix channel address decode for non-hash mode
EDAC/igen6: Fix channel selection hash
EDAC/igen6: Fix interleave boundary condition
EDAC/ie31200: Decouple DIMM width decoding from enum order
RAS/AMD/ATL: Remove conditional return with no effect
EDAC: Remove redundant dev_err()
MAINTAINERS: Add Radhey Shyam Pandey as Xilinx EDAC reviewer
EDAC/altera: Remove remaining CONFIG_64BIT ifdefs in the DB-error path
EDAC/altera: Use ECC manager compatible to select A10/S10 IRQ layout
RAS/AMD/ATL, EDAC/amd64: Only load ATL when needed
...
ntb_netdev updates shared net_device stats from per-QP RX and TX
callbacks. Once multiple queues are enabled, concurrent updates can be
lost.
Use per-CPU tstats for packet and byte counters and DEV_STATS_INC() for
less frequent drop and error counters. Callbacks can run synchronously
in the xmit path or asynchronously from a tasklet or the memcpy kthread.
Pin TX updates against migration in the kthread path. Use the IRQ-safe
u64_stats helpers because netpoll can invoke the synchronous path with
IRQs disabled.
Let the core manage tstats while keeping transport teardown after
unregister_netdev(), outside RTNL. RCU lets unregister wait for TX
completions already updating stats, while later completions only consume
the skb and skip accounting and queue wake.
Fixes: 24d9e73c7e ("net: ntb_netdev: Support ethtool channels for multi-queue")
Cc: stable@vger.kernel.org
Suggested-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Koichiro Den <den@valinux.co.jp>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20260830151617.3546585-1-den@valinux.co.jp
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
ipv6_srh_rcv() runs with skb->data at the Segment Routing Header (SRH)
while skb_network_header() points at the IPv6 header.
When segments_left > 0, ipv6_srh_rcv() previously restored the skb->data
position by pushing sizeof(struct ipv6hdr), assuming the SRH immediately
followed the fixed IPv6 header. If another extension header (such as a
Hop-by-Hop options header) precedes the SRH, skb_network_offset()
remained negative.
This led to two problems:
1. During ip6_route_input(), fib6_rules_early_flow_dissect() invokes
__skb_flow_dissect() which passes the negative skb_network_offset()
to flow dissection, breaking BPF and C flow dissector logic.
2. If forwarded via ip6_forward() or redirected via act_mirred, downstream
handlers (like sch_fragment() or neighbour output) pass the negative
offset as an unsigned length, triggering OOB memcpy or buffer overflows.
Fix this by pushing -skb_network_offset(skb) before routing, ensuring
skb_network_offset(skb) is 0 for route lookup / flow dissection as well as
downstream forwarding. On the loopback path, pull skb_transport_offset(skb)
to restore skb->data to the SRH before looping back.
Fixes: 1ababeba4a ("ipv6: implement dataplane support for rthdr type 4 (Segment Routing Header)")
Reported-by: TencentOS Corvus AI <corvus@tencent.com>
Reported-by: Jun Yang <junvyyang@tencent.com>
Reported-by: Fourie Zhang <fouriezhang@tencent.com>
Closes: https://lore.kernel.org/netdev/20260817104128.22681-1-juny24602@gmail.com/
Closes: https://lore.kernel.org/netdev/20260827092345.2301937-1-fouriezhang@tencent.com/
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Link: https://patch.msgid.link/20260828141727.2372570-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The interface name is passed in a fixed length (TIPC_MAX_IF_NAME) buffer.
Replace the strcpy(data, l->if_name) with memcpy() so that the
pad bytes are actually written (l->if_name[] is zero padded)
rather than sending random bytes from the skb to the remote system.
Replace two other strcpy() with strscpy().
Fixes: e74a386d70 ("tipc: remove pre-allocated message header in link struct")
Signed-off-by: David Laight <david.laight.linux@gmail.com>
Reviewed-by: Tung Nguyen <tung.quang.nguyen@est.tech>
Link: https://patch.msgid.link/20260829115813.188600-1-david.laight.linux@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
User-space applications can bind a large number of service addresses to
one or more sockets. Each binding of a local-scope service address inserts
one entry (publication) into the TIPC name table. If the number of these
publications exceeds TIPC_MAX_PUBL (65535), protocol service types
(such as node state and link state) are no longer inserted into the name
table. This causes two issues:
1. User-space applications subscribing to node or link up/down events
stop receiving notifications.
2. A NULL pointer dereference can occur:
BUG: kernel NULL pointer dereference, address: 00000000000000d0
...
CPU: 0 UID: 0 PID: 0 Comm: swapper/0 Not tainted 7.2.0-rc4-default+ #5 PREEMPT(full)
...
RIP: 0010:tipc_named_node_up (./include/linux/skbuff.h:2251 net/tipc/name_distr.c:195 net/tipc/name_distr.c:221)
...
Call Trace:
<IRQ>
tipc_node_write_unlock (net/tipc/node.c:428)
tipc_rcv (net/tipc/node.c:934 net/tipc/node.c:2189)
tipc_udp_recv (net/tipc/udp_media.c:389)
Thread 1 (tipc_net_finalize) | Thread 2 (named_distribute)
-----------------------------|-----------------------------
| ...
| list_for_each_entry(publ, pls, binding_node) {
| ...
| __skb_queue_tail(list, skb);
| ...
| }
| ...
| hdr = buf_msg(skb_peek_tail(list));
... |
tipc_nametbl_publish(); |
If 'tipc_nametbl_publish()' (Thread 1) fails because the number of
local publications reaches TIPC_MAX_PUBL, list (Thread 2) will be empty. As a
result, NULL is passed to 'buf_msg()', leading to a NULL pointer dereference.
Fix these issues by allowing protocol service types (node state, link state,
and topology server) to be inserted into the name table unconditionally.
This ensures that users subscribing to these types always receive
notifications. In addition, the maximum number of local user publications is
reduced to (TIPC_MAX_PUBL - 1). This ensures that the maximum bulk size
calculated in tipc_link_set_queue_limits() remains valid.
Fixes: a5e7ac5ce1 ("tipc: fix regression bug where node events are not being generated")
Reported-by: Xiang Mei <xmei5@asu.edu>
Tested-by: Weiming Shi <bestswngs@gmail.com>
Signed-off-by: Tung Nguyen <tung.quang.nguyen@est.tech>
Link: https://patch.msgid.link/20260827111418.164957-1-tung.quang.nguyen@est.tech
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Ido Schimmel says:
====================
Mitigate a side channel in routing exception caches
When an ICMP error that quotes a UDP packet is locally delivered, the
kernel only creates a routing exception if the quoted packet matches
a socket. This allows an off-path attacker to conduct a side-channel
attack on the routing exception caches in order to discover the
ephemeral ports used by connected UDP sockets.
Previous mitigations tried to make it harder for attackers to find hash
collisions in these caches and make the eviction of exceptions less
predictable. Amit Klein and Noam Caspi demonstrated that both of these
mitigations can be bypassed.
This patchset tries to mitigate such attacks by always creating an
exception, even before trying to find a matching socket. The exception
is created by the same helpers that are used when the quoted packet did
not originate from a socket, so that guesses (right or wrong) from an
off-path attacker always result in an exception being created or updated
in the cache that the attacker can observe.
Note that this mitigation does not make it easier for attackers to fill
these caches, since they can already create exceptions with little to no
validation. For example, by sending an ICMP error that quotes an ICMP
Echo Reply or one that quotes a UDP source port that matches a wildcard
socket.
In the good case (matched socket) this comes at the cost of an extra
route lookup, as the exception is created before the one performed by
the socket path. When the two lookups resolve to different nexthops,
an exception is created in the cache of each.
Patch #1 fixes a pre-existing bug in the handling of ICMPv6 Redirect
Message packets. Discovered while writing the selftest.
Patch #2 creates an exception from the IPv4 UDP code even before socket
matching. Other socket types do not need this: raw sockets have no
ports, and for TCP the ICMP error is discarded unless the quoted
sequence number is in window.
Patch #3 does the same for IPv6.
Patch #4 adds a selftest.
v1: https://lore.kernel.org/netdev/20260826143735.1819315-1-idosch@nvidia.com/
====================
Link: https://patch.msgid.link/20260828192344.2596928-1-idosch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add a test for the IPv4 and IPv6 exception caches, covering the
exceptions that are created in response to ICMP errors quoting a UDP
packet.
The topology consists of a host (h1) that reaches a remote host (h2)
via a router (r1), with a second router (r2) attached to the segment
shared by h1 and r1. UDP packets are injected using a packet socket, so
that an ICMP error quoting them is only matched to a socket when one was
opened separately with the same source port. PMTU errors are provoked by
lowering the MTU of the far end of the path and redirects by pointing
r1's route towards h2 back over the segment it received the packet from.
The following is tested for both address families and for both PMTU and
redirect exceptions:
* An error that is not matched to a socket creates an exception that
carries the new MTU or gateway.
* An error that is matched to a socket creates the same exception.
The PMTU tests further verify that a lower PMTU replaces the one stored
in the exception whereas a higher one does not, and that a socket which
disabled PMTU discovery using IP{,V6}_PMTUDISC_OMIT gets the same
exception as the other cases.
Without "ipv4: udp: Create exceptions before socket matching" and "ipv6:
udp: Create exceptions before socket matching", the tests that do not
open a socket fail:
# ./exception_cache.sh
TEST: IPv4: PMTU: exception without a matching socket [FAIL]
No socket: exception does not carry an MTU of 1400
TEST: IPv6: PMTU: exception without a matching socket [FAIL]
No socket: exception does not carry an MTU of 1400
TEST: IPv4: PMTU: exception with a matching socket [ OK ]
TEST: IPv6: PMTU: exception with a matching socket [ OK ]
TEST: IPv4: PMTU: exception with a socket ignoring it [FAIL]
PMTU discovery disabled: exception does not carry an MTU of 1400
TEST: IPv6: PMTU: exception with a socket ignoring it [FAIL]
PMTU discovery disabled: exception does not carry an MTU of 1400
TEST: IPv4: Redirect: exception without a matching socket [FAIL]
No socket: exception does not carry the new gateway
TEST: IPv6: Redirect: exception without a matching socket [FAIL]
No socket: exception does not carry the new gateway
TEST: IPv4: Redirect: exception with a matching socket [ OK ]
TEST: IPv6: Redirect: exception with a matching socket [ OK ]
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Link: https://patch.msgid.link/20260828192344.2596928-5-idosch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Currently, when ICMPv6 Packet Too Big and Redirect Message packets are
locally delivered and quote a UDP packet, an exception is only created
in the IPv6 exception cache if the kernel can match the UDP packet to an
existing socket.
This behavior allows off-path attackers to conduct a side-channel attack
on the exception cache in order to discover the ephemeral port used by a
connected UDP socket.
Commit 4785305c05 ("ipv6: use siphash in rt6_exception_hash()") and
commit a00df2caff ("ipv6: make exception cache less predictible") tried
to mitigate such attacks by making it harder for attackers to discover
hash collisions in the exception cache and by randomizing the number of
exceptions a hash bucket can hold, respectively. Unfortunately, both of
the mitigations can be bypassed.
Instead, mitigate such attacks by always creating an exception, even
before trying to find a matching socket. Do that by calling
ip6_update_pmtu() and ip6_redirect(), the helpers used when the quoted
packet did not originate from a socket.
This means that guesses (right or wrong) from an off-path attacker will
always result in an exception being created or updated in the cache that
the attacker can observe.
Pass the ifindex of the ingress device and the default uid, in a similar
fashion to icmpv6_err(). Unlike IPv4, an oif of 0 would not match any
nexthop in ip6_redirect_nh_match() and no exception would be created in
response to a Redirect Message.
Note that this does not allow attackers to create exceptions that they
could not create before, as both helpers can already be reached with
little to no validation. For example, by sending an ICMPv6 error that
quotes an ICMPv6 Echo Reply or one that quotes a UDP source port that
matches a wildcard socket.
Also note that in the good case (matched socket) the above scheme comes
at the cost of an extra route lookup, as the no socket helpers perform
their own lookup before the one performed by ip6_sk_update_pmtu() /
ip6_sk_redirect(). When the two resolve to different nexthops, it also
results in two exceptions being created for the same destination IP. One
in the exception cache of the nexthop resolved by the no socket helpers
and another in the exception cache of the nexthop used by the socket.
Fixes: 2b760fcf5c ("ipv6: hook up exception table to store dst cache")
Cc: stable@vger.kernel.org
Reported-by: Amit Klein <aksecurity@gmail.com>
Reported-by: Noam Caspi <noam.caspi@mail.huji.ac.il>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://patch.msgid.link/20260828192344.2596928-4-idosch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Currently, when ICMP Fragmentation Needed and Redirect Message packets
are locally delivered and quote a UDP packet, a FIB nexthop exception
(FNHE) is only created if the kernel can match the UDP packet to an
existing socket.
This behavior allows off-path attackers to conduct a side-channel attack
on the FNHE cache in order to discover the ephemeral port used by a
connected UDP socket.
Commit 6457378fe7 ("ipv4: use siphash instead of Jenkins in
fnhe_hashfun()") and commit 67d6d681e1 ("ipv4: make exception cache
less predictible") tried to mitigate such attacks by making it harder
for attackers to discover hash collisions in the FNHE cache and by
randomizing the number of exceptions a hash bucket can hold,
respectively. Unfortunately, both of the mitigations can be bypassed.
Instead, mitigate such attacks by always creating a FNHE, even before
trying to find a matching socket. Do that by calling ipv4_update_pmtu()
and ipv4_redirect(), the helpers used when the quoted packet did not
originate from a socket.
This means that guesses (right or wrong) from an off-path attacker will
always result in a FNHE being created or updated in the cache that the
attacker can observe.
Pass an oif of 0, in a similar fashion to icmp_err(). This is also the
oif used by the socket path for sockets that are not bound to a device.
Note that this does not allow attackers to create FNHEs that they could
not create before, as both helpers can already be reached with little to
no validation. For example, by sending an ICMP error that quotes an ICMP
Echo Reply or one that quotes a UDP source port that matches a wildcard
socket.
Also note that in the good case (matched socket) the above scheme comes
at the cost of an extra route lookup, as the no socket helpers perform
their own lookup before the one performed by ipv4_sk_update_pmtu() /
ipv4_sk_redirect(). When the two resolve to different nexthops, it also
results in two exceptions being created for the same destination IP. One
in the FNHE cache of the nexthop resolved by the no socket helpers and
another in the FNHE cache of the nexthop used by the socket.
Fixes: 4895c771c7 ("ipv4: Add FIB nexthop exceptions.")
Cc: stable@vger.kernel.org
Reported-by: Amit Klein <aksecurity@gmail.com>
Reported-by: Noam Caspi <noam.caspi@mail.huji.ac.il>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://patch.msgid.link/20260828192344.2596928-3-idosch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When an ICMP Redirect Message is matched to a socket, both IPv4 and IPv6
verify that the source IP of the ICMP packet is the current gateway for
the quoted packet. Both also pass the socket's bound device as the
expected nexthop device.
The difference is that IPv4 treats "oif=0" as "any", whereas IPv6 always
requires an exact match (see ip6_redirect_nh_match()), since the gateway
address is usually a link-local address.
Therefore, when an IPv6 UDP/RAW socket is not bound to a device, the
above verification fails and an exception is not created. This also
happens when the socket is bound to a VRF, as l3mdev_update_flow()
resets the oif to 0.
Fix this by passing the ifindex of the ingress device as the expected
nexthop device. This is consistent with the existing callers of
ip6_redirect(). Note that for ICMPv6 Redirect Message packets the VRF
driver does not reset skb->dev to the VRF device, so skb->dev is
correct, even when it is a VRF port.
Fixes: b55b76b221 ("ipv6:introduce function to find route for redirect")
Cc: stable@vger.kernel.org
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Link: https://patch.msgid.link/20260828192344.2596928-2-idosch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Overflow status and restart masks are u64, but bits were built with
BIT(). On RV32 that is an unsigned long shift, so indices >= 32 truncate
or wrap and corrupt the mask.
Use BIT_ULL() for those u64 bitops.
Fixes: a8625217a0 ("drivers/perf: riscv: Implement SBI PMU snapshot function")
Assisted-by: DeepSeek:deepseek-v3
Signed-off-by: Xixin Liu <liuxixin@kylinos.cn>
Link: https://patch.msgid.link/prpmask01bitul.v2.1786434000.git.liuxixin@kylinos.cn
Cc: stable@vger.kernel.org
[pjw@kernel.org: updated to apply]
Signed-off-by: Paul Walmsley <pjw@kernel.org>
x86 did this in commit b0a848f4a4 ("x86/bugs: Make i386 use
GENERIC_BUG_RELATIVE_POINTERS")
powerpc did this in commit 1baa1f70ef ("powerpc: Allow relative
pointers in bug table entries")
Similar as x86 and powerpc does, make RV32 use
GENERIC_BUG_RELATIVE_POINTERS for "there is only one code path." and
"less #ifdef is more better".
Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
Link: https://patch.msgid.link/20260221024255.3552-1-jszhang@kernel.org
Signed-off-by: Paul Walmsley <pjw@kernel.org>
The vendor-extension handlers reached from hwprobe_one_pair()
(hwprobe_isa_vendor_ext_thead_0() and friends) only OR the present bits
into pair->value via VENDOR_EXTENSION_SUPPORTED() and clear their own
missing bits; they assume the caller has already zeroed pair->value.
That holds for hwprobe_get_values() (it zeroes each pair) and
hwprobe_get_cpus() (it re-initializes its scratch pair per key), but not
for complete_hwprobe_vdso_data(), which reuses a single pair across all
keys without re-zeroing. A vendor key therefore inherits stale bits from
the previously probed key, and the wrong value is cached in the vDSO
all_cpu_hwprobe_values[] and handed to userspace on the fast patih.
Zero pair->value once at the top of hwprobe_one_pair() so every handler
starts from a clean value regardless of the caller, and drop the now
redundant zeroing in the *_BLOCK_SIZE cases. hwprobe_isa_ext0() keeps its
own zeroing because hwprobe_ext0_has() calls it directly, bypassing
hwprobe_one_pair().
Fixes: a5ea53da65 ("riscv: hwprobe: Add thead vendor extension probing")
Signed-off-by: Andy Chiu <tchiu@tenstorrent.com>
Reviewed-by: Jesse Taube <jtaubepe@redhat.com>
Link: https://patch.msgid.link/20260725001614.2578617-2-tchiu@tenstorrent.com
Cc: stable@vger.kernel.org
Signed-off-by: Paul Walmsley <pjw@kernel.org>
This reverts commit 3033b2b1e3.
The reverted patch is userspace-visible behavior change, not a bug fix.
The two variables here (pmm and pmlen) control two independent features:
pmm is the _hardware_ pointer masking mode that applies while executing
in userspace. pmlen is the shift amount that the _kernel_ uses when
untagging addresses; PMLEN_0 means no untagging occurs, so the kernel
does not accept tagged addresses in syscall arguments.
It is valid (as documented and tested by the self test) to enable
pointer masking without enabling the tagged address ABI. This separation
is necessary to allow userspace to create an execution environment
similar to what the kernel supports on arm64 by default, where TBI is
enabled but the tagged address ABI is not. (On arm64, there is no
equivalent to PR_PMLEN_MASK because TBI is always enabled.)
Signed-off-by: Samuel Holland <samuel.holland@sifive.com>
Link: https://patch.msgid.link/20260820014551.1979772-1-samuel.holland@sifive.com
Cc: stable@vger.kernel.org
Fixes: 3033b2b1e3 ("riscv: Reset pmm when PR_TAGGED_ADDR_ENABLE is not set")
Signed-off-by: Paul Walmsley <pjw@kernel.org>
patch_map() always creates a temporary writable mapping via fixmap for
kernel text addresses, even when CONFIG_STRICT_KERNEL_RWX is disabled
and the kernel text is already mapped with _PAGE_WRITE.
This is unnecessary overhead at best, and on minimal configurations
it can cause page faults.
Skip the fixmap path for kernel text when CONFIG_STRICT_KERNEL_RWX
is not enabled, since the text pages are already writable in that case.
The module text path is already gated on CONFIG_STRICT_MODULE_RWX and
is kept unchanged.
Reported-by: Klara Modin <klara@kasm.eu>
Closes: https://lore.kernel.org/all/ant_8TaBbov_GS4i@soda.int.kasm.eu/
Reported-by: Lad Prabhakar <prabhakar.csengg@gmail.com>
Closes: https://lore.kernel.org/all/CA+V-a8tQK8rih9SGGTyqrEBGpNkx4H0eX2YccCRrgkVAPr+EBg@mail.gmail.com/
Tested-by: Klara Modin <klarasmodin@gmail.com>
Tested-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Link: https://patch.msgid.link/20260814082742.148403-3-xiaofengmian@163.com
Signed-off-by: Paul Walmsley <pjw@kernel.org>
When CONFIG_STRICT_MODULE_RWX is not set, execmem cannot create
temporary writable mappings for read-only executable pages. In this
case, the execmem ranges must already have writable permissions.
Currently EXECMEM_KPROBES unconditionally uses PAGE_KERNEL_READ_EXEC,
which causes kprobe instruction slot writes to trigger page faults
on systems where CONFIG_STRICT_MODULE_RWX is not enabled.
Fix this by using PAGE_KERNEL_EXEC when CONFIG_STRICT_MODULE_RWX
is not available.
Signed-off-by: Xiaofeng Yuan <xiaofengmian@163.com>
Tested-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Nam Cao <namcao@linutronix.de>
Link: https://patch.msgid.link/20260814082742.148403-2-xiaofengmian@163.com
Signed-off-by: Paul Walmsley <pjw@kernel.org>
Shuangpeng Bai reported a KASAN slab-use-after-free in
ip6gre_tunnel_xmit().
The precise KASAN bug was caused by ip6_tnl_xmit() consuming the
skb during headroom expansion and returning an error, while
ip6gre_tunnel_xmit() still held the stale pointer and called
skb_tunnel_info_txcheck(skb) at tx_err. That specific bug was fixed by
commit 87f21b59dd ("ip6_tunnel: use skb_cow_head() in ip6_tnl_xmit()").
However, calling skb_tunnel_info_txcheck(skb) at the tx_err label
after the transmission attempt remains problematic:
Downstream helpers like ip6_tnl_xmit() call skb_scrub_packet(),
which drops the skb's metadata_dst before transmission. If an error
occurs later during transmit, inspecting skb at tx_err sees a scrubbed
dst and misclassifies tx_errors vs tx_dropped.
Commit e5f7e211b6 ("ip6gre: avoid tx_error when sending MLD/DAD on
external tunnels") already handled this correctly in
ip6erspan_tunnel_xmit() by checking and caching tun_info before
transmit.
Align ip6gre_tunnel_xmit() with ip6erspan_tunnel_xmit() by caching
tun_info before xmit and checking it at tx_err.
Fixes: e5f7e211b6 ("ip6gre: avoid tx_error when sending MLD/DAD on external tunnels")
Reported-by: Shuangpeng Bai <shuangpeng.kernel@gmail.com>
Closes: https://lore.kernel.org/netdev/20260819062224.3197349-1-shuangpeng.kernel@gmail.com/
Cc: Davide Caratti <dcaratti@redhat.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Link: https://patch.msgid.link/20260828103731.1951815-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Eric Dumazet says:
====================
ipv6: mcast: RCU and timer fixes
This series addresses several RCU synchronization and timer calculation
issues identified in IPv6 multicast (MLD) handling within net/ipv6/mcast.c
while I was working on fixing a syzbot report in net/ipv4/icmp.c.
Patch 1 fixes an RCU reader diversion in ip6_mc_del1_src() where mutating
psf->sf_next to insert an unlinked source node into the tombstone list
diverted concurrent lockless readers (e.g. ipv6_chk_mcast_addr()) into
pmc->mca_tomb, causing them to miss remaining active sources.
Patch 2 converts ip6_mc_source() to use copy-on-write RCU updates.
Previously, source additions and deletions modified the socket's
psl->sl_addr array in-place, causing concurrent lockless readers in
inet6_mc_check() (UDP/RAW receive path) to observe torn 16-byte IPv6
addresses or duplicated/missed sources.
Patch 3 fixes delay calculation in igmp6_join_group() when canceling an
existing delayed work, preventing unsigned jiffies underflows when the
timer has already expired and clamping the delay to the unsolicited report
interval.
Patch 4 ensures rcu_assign_pointer() is consistently used for __rcu list
updates in __ipv6_dev_mc_dec(), ipv6_sock_mc_drop(), __ipv6_sock_mc_close(),
and related helpers.
Patch 5 switches igmp6_mc_seq_show() to use jiffies_delta_to_clock_t()
with a signed long delta, preventing underflows in /proc/net/igmp6 timer
duration reporting.
====================
Link: https://patch.msgid.link/20260828084531.1826790-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
If a multicast group timer has expired but the delayed work has
not yet run to clear MAF_TIMER_RUNNING, expires - jiffies produces
a negative value.
Because unsigned arithmetic was used with jiffies_to_clock_t(),
expires - jiffies underflows to a huge value and reports invalid
timer durations in /proc/net/igmp6.
Use jiffies_delta_to_clock_t() with a signed long delta to properly
cap expired deltas to 0, matching IPv4 igmp_mc_seq_show() and commit
a399a80531 ("time: jiffies_delta_to_clock_t() helper to the rescue").
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Link: https://patch.msgid.link/20260828084531.1826790-6-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Several places in net/ipv6/mcast.c update RCU-protected lists
(np->ipv6_mc_list, idev->mc_list, idev->mc_tomb) using direct pointer
assignments instead of rcu_assign_pointer():
1. In __ipv6_dev_mc_dec(), unlinking a group from idev->mc_list did:
*map = ma->next;
without rcu_assign_pointer() while concurrent readers traverse
idev->mc_list locklessly under rcu_read_lock().
2. In ipv6_sock_mc_drop() and __ipv6_sock_mc_close(), unlinking a group
from np->ipv6_mc_list directly assigned *lnk = mc_lst->next and
np->ipv6_mc_list = mc_lst->next without rcu_assign_pointer(), racing
with lockless readers in inet6_mc_check().
3. In __ipv6_sock_mc_join(), mc_lst->next was initialized to
np->ipv6_mc_list via raw assignment before publishing mc_lst.
4. In mld_del_delrec() and __ipv6_dev_mc_inc(), __rcu source pointers
passed into rcu_assign_pointer() lacked explicit dereference helpers.
Fix these by consistently using rcu_assign_pointer() along with
mc_dereference() / sock_dereference().
Fixes: 456b61bca8 ("ipv6: mcast: RCU conversion")
Fixes: 88e2ca3080 ("mld: convert ifmcaddr6 to RCU")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Taehee Yoo <ap420073@gmail.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Link: https://patch.msgid.link/20260828084531.1826790-5-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When joining a multicast group, if a report work is already pending
(e.g. scheduled by a query or a previous join), igmp6_join_group()
cancels the delayed work and recalculates the delay:
if (cancel_delayed_work(&ma->mca_work)) {
refcount_dec(&ma->mca_refcnt);
delay = ma->mca_work.timer.expires - jiffies;
}
Unlike igmp6_group_queried(), igmp6_join_group() did not check
if delay >= interval. This leads to two issues:
1. If the timer has already expired (timer.expires <= jiffies), the
stale expiry is reused by mod_delayed_work(), causing the second
unsolicited report to fire on the very next tick without a
randomized delay.
2. If the timer was originally armed by a query with a large
maximum response delay, delay could exceed
unsolicited_report_interval(ma->idev).
Fix this by initializing delay to unsolicited_report_interval(ma->idev)
and re-randomizing it with get_random_u32_below(interval) when
delay >= interval, mirroring the logic in igmp6_group_queried().
Fixes: 2d9a93b490 ("mld: convert from timer to delayed work")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Taehee Yoo <ap420073@gmail.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Link: https://patch.msgid.link/20260828084531.1826790-4-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
pmc->sflist is read locklessly under rcu_read_lock() by
inet6_mc_check() during packet reception in the UDP and RAW
multicast receive paths.
ip6_mc_source() mutated psl->sl_addr and psl->sl_count in-place
when adding or removing a source filter. Additionally, when expanding
the filter buffer, newpsl was published via rcu_assign_pointer()
before writing the new source into the array.
Because 16-byte struct in6_addr writes are not atomic and array
shifting is not synchronized with RCU readers, concurrent readers in
inet6_mc_check() could read torn IPv6 addresses or observe
duplicated/missed source entries.
Fix this by switching ip6_mc_source() to copy-on-write RCU updates:
allocate and fully populate newpsl before publishing it via
rcu_assign_pointer(), and reclaim the old filter via kfree_rcu(),
matching ip6_mc_msfilter().
Also remove the now unused IP6_SFBLOCK macro.
Fixes: 882ba1f73c ("mld: convert ipv6_mc_socklist->sflist to RCU")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Taehee Yoo <ap420073@gmail.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Link: https://patch.msgid.link/20260828084531.1826790-3-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
