The pattern is to check the entire driver request space, not just
sizeof something unrelated.
Fixes: 40909f664d ("RDMA/efa: Add EFA verbs implementation")
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://patch.msgid.link/1-v1-83e918d69e73+a9-rdma_udata_rc_jgg@nvidia.com
Acked-by: Michael Margolin <mrgolin@amazon.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Table 63 of the IBTA spec lists R_Key violations as a class C
error. 9.9.3.1.3 Responder Class C Fault Behavior indicates an
affiliated asynchronous error should be generated at the responder
if the error can be associated to a QP but not a particular RX WQE.
Relevant portion of the spec:
C9-222.1.1: For an HCA responder using Reliable Connection service, for
a Class C responder side error, the error shall be reported to the
requester by generating the appropriate NAK code as specified in Table 63
Responder Error Behavior Summary on page 448. If the error can be related
to a particular QP but cannot be related to a particular WQE on that
receive queue (e.g. the error occurred while executing an RDMA Write
Request without immediate data), the error shall be reported to the
responder’s client as an Affiliated Asynchronous error. See Section
10.10.2.3 Asynchronous Errors on page 576 for details. If the error can be
related to a particular WQE on a given receive queue, the QP shall be
placed into the error state and the error shall be reported to the
responder’s client as a Completion error.
Generate an affiliated asynchronous error upon Rkey violations
if the opcode does not carry an immediate. This causes async
events at the responder for all ops that generate R_Key violations
except WRITE_WITH_IMM, where the error can ride in with the RX WQE.
Signed-off-by: Evan Green <evgreen@meta.com>
Link: https://patch.msgid.link/20260220185533.252759-1-evgreen@meta.com
Reviewed-by: Zhu Yanjun <yanjun.zhu@linux.dev>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
The function ionic_query_port() calls ib_device_get_netdev() without
checking the return value which could lead to NULL pointer dereference,
Fix it by checking the return value and return -ENODEV if the 'ndev' is
NULL.
Fixes: 2075bbe8ef ("RDMA/ionic: Register device ops for miscellaneous functionality")
Signed-off-by: Kamal Heib <kheib@redhat.com>
Link: https://patch.msgid.link/20260220222125.16973-2-kheib@redhat.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
After commit 471e998c0e ("gpiolib: remove redundant callback check"),
a warning will be printed if the gpio driver does not implement this
callback. The warning was added in commit e623c4303e ("gpiolib:
sanitize the return value of gpio_chip::get_direction()"), but was
masked by the "redundant" check.
The warning can be triggered by any action that calls the callback,
such as dumping the GPIO state from /sys/kernel/debug/gpio.
Implement it for the sunxi driver. This is simply a matter of reading
out the mux value from the registers, then checking if it is one of
the GPIO functions and which direction it is.
Signed-off-by: Chen-Yu Tsai <wens@kernel.org>
Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Reviewed-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Signed-off-by: Linus Walleij <linusw@kernel.org>
Commit e2c58cbe3a ("pinctrl: rockchip: Simplify locking with
scoped_guard()") added a scoped_guard() over existing code containing a
"break" instruction. That "break" was for the outer (existing)
for-loop, which now exits inner, scoped_guard() loop. If GPIO driver
did not probe, then driver will not bail out, but instead continue to
configure the pin.
Fix the issue by simplifying the code - the break in original code was
leading directly to end of the function returning 0, thus we can simply
return here rockchip_pinconf_defer_pin status.
Reported-by: David Lechner <dlechner@baylibre.com>
Closes: https://lore.kernel.org/r/f5b38942-a584-4e78-a893-de4a219070b2@baylibre.com/
Fixes: e2c58cbe3a ("pinctrl: rockchip: Simplify locking with scoped_guard()")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Signed-off-by: Linus Walleij <linusw@kernel.org>
devm_add_action_or_reset() already invokes the action on failure,
so the explicit put causes a double-put.
Fixes: 9b07cdf86a ("pinctrl: cirrus: Fix fwnode leak in cs42l43_pin_probe()")
Signed-off-by: Felix Gu <ustc.gu@gmail.com>
Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Signed-off-by: Linus Walleij <linusw@kernel.org>
The of_get_parent() function returns a device_node with an incremented
reference count.
Use the __free(device_node) cleanup attribute to ensure of_node_put()
is automatically called when pnode goes out of scope, fixing a
reference leak.
Fixes: 6e9be3abb7 ("pinctrl: Add driver support for Amlogic SoCs")
Signed-off-by: Felix Gu <ustc.gu@gmail.com>
Signed-off-by: Linus Walleij <linusw@kernel.org>
File-scope 'sdm660_lpi_pinctrl_groups' and
'sdm660_lpi_pinctrl_functions' are not used outside of this unit, so
make them static to silence sparse warnings:
pinctrl-sdm660-lpass-lpi.c:79:27: warning: symbol 'sdm660_lpi_pinctrl_groups' was not declared. Should it be static?
pinctrl-sdm660-lpass-lpi.c:116:27: warning: symbol 'sdm660_lpi_pinctrl_functions' was not declared. Should it be static?
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Linus Walleij <linusw@kernel.org>
File-scope 'sky1_pinctrl_pm_ops' is not used outside of this unit (and
it should not be!), so unexport it and make it static to silence sparse
warning:
pinctrl-sky1.c:525:25: warning: symbol 'sky1_pinctrl_pm_ops' was not declared. Should it be static?
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Signed-off-by: Linus Walleij <linusw@kernel.org>
File-scope 'amdisp_pinctrl_ops' is not used outside of this unit, so
make it static to silence sparse warning:
pinctrl-amdisp.c:83:26: warning: symbol 'amdisp_pinctrl_ops' was not declared. Should it be static?
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Signed-off-by: Linus Walleij <linusw@kernel.org>
In pinconf_generic_parse_dt_config(), if parse_dt_cfg() fails, it returns
directly. This bypasses the cleanup logic and results in a memory leak of
the cfg buffer.
Fix this by jumping to the out label on failure, ensuring kfree(cfg) is
called before returning.
Fixes: 90a18c5128 ("pinctrl: pinconf-generic: Handle string values for generic properties")
Signed-off-by: Felix Gu <ustc.gu@gmail.com>
Reviewed-by: Antonio Borneo <antonio.borneo@foss.st.com>
Signed-off-by: Linus Walleij <linusw@kernel.org>
msg passed to netconsole from the console subsystem is not guaranteed
to be nul-terminated. Before recent
commit 7eab73b186 ("netconsole: convert to NBCON console infrastructure")
the message would be placed in printk_shared_pbufs, a static global
buffer, so KASAN had harder time catching OOB accesses. Now we see:
printk: console [netcon_ext0] enabled
BUG: KASAN: slab-out-of-bounds in string+0x1f7/0x240
Read of size 1 at addr ffff88813b6d4c00 by task pr/netcon_ext0/594
CPU: 65 UID: 0 PID: 594 Comm: pr/netcon_ext0 Not tainted 6.19.0-11754-g4246fd6547c9
Call Trace:
kasan_report+0xe4/0x120
string+0x1f7/0x240
vsnprintf+0x655/0xba0
scnprintf+0xba/0x120
netconsole_write+0x3fe/0xa10
nbcon_emit_next_record+0x46e/0x860
nbcon_kthread_func+0x623/0x750
Allocated by task 1:
nbcon_alloc+0x1ea/0x450
register_console+0x26b/0xe10
init_netconsole+0xbb0/0xda0
The buggy address belongs to the object at ffff88813b6d4000
which belongs to the cache kmalloc-4k of size 4096
The buggy address is located 0 bytes to the right of
allocated 3072-byte region [ffff88813b6d4000, ffff88813b6d4c00)
Fixes: c62c0a17f9 ("netconsole: Append kernel version to message")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20260219195021.2099699-1-kuba@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
/tmp/next/build/drivers/infiniband/core/ib_core_uverbs.c: In function 'rdma_user_mmap_entry_remove':
/tmp/next/build/drivers/infiniband/core/ib_core_uverbs.c:249:17: error: implicit declaration of function 'dma_buf_move_notify' [-Wimplicit-function-declaration]
249 | dma_buf_move_notify(uverbs_dmabuf->dmabuf);
| ^~~~~~~~~~~~~~~~~~~
Signed-off-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Christian König <christian.koenig@amd.com>
Link: https://lore.kernel.org/r/aZyhDuaF5vi05KBY@sirena.org.uk
Fix following validation error:
arch/arm/boot/dts/mediatek/mt7623a-rfb-emmc.dtb: efuse@10206000: compatible: 'oneOf' conditional failed, one must be fixed:
['mediatek,mt7623-efuse', 'mediatek,mt8173-efuse'] is too long
'mediatek,mt8173-efuse' was expected
'mediatek,efuse' was expected
from schema $id: http://devicetree.org/schemas/nvmem/mediatek,efuse.yaml#
arch/arm/boot/dts/mediatek/mt7623a-rfb-emmc.dtb: efuse@10206000: Unevaluated properties are not allowed ('compatible' was unexpected)
from schema $id: http://devicetree.org/schemas/nvmem/mediatek,efuse.yaml#
Fixes: 43c7a91b4b ("arm: dts: mt7623: add efuse nodes to the mt7623.dtsi file")
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
In preparation for adding display nodes. No other changes.
Signed-off-by: Luca Leonardo Scorcia <l.scorcia@gmail.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Merge the mmc fixes for v7.0-rc[n] into the next branch, to allow them to
get tested together with the mmc changes that are targeted for the next
release.
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
This driver currently only supports builds against a PIC32 target. Now
that commit d6618d277c ("mmc: sdhci-pic32: update include to use
pic32.h from platform_data") is merged, it's possible to compile this
driver on other architectures.
To avoid future breakage of this driver in the future, let's update the
Kconfig so that it can be built with COMPILE_TEST enabled on all
architectures.
Signed-off-by: Brian Masney <bmasney@redhat.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Add the missing SPDX license identifier to the top of the file, and drop
the boiler plate license text.
Signed-off-by: Brian Masney <bmasney@redhat.com>
Cc: linux-spdx@vger.kernel.org
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Since it's moved to dw_mmc core and resued by others variant host
drivers, so drop the pltfm notation.
Suggested-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Add compatible strings for Axiado AX3000 SoC eMMC controller which
is based on Arasan eMMC controller.
Signed-off-by: SriNavmani A <srinavmani@axiado.com>
Signed-off-by: Tzu-Hao Wei <twei@axiado.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Change the regulator-name properties to be unique for all regulators.
U-Boot cannot handle duplicate names.
Signed-off-by: David Lechner <dlechner@baylibre.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Three MMC drivers have unnecessary module_init and module_exit functions
that are empty or just print a message. Remove them. Note that if a
module_init function exists, a module_exit function must also exist;
otherwise, the module cannot be unloaded.
Signed-off-by: Ethan Nelson-Moore <enelsonmoore@gmail.com>
Acked-by: Shawn Lin <shawn.lin@rock-chips.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
When the FarSync T-series card is being detached, the fst_card_info is
deallocated in fst_remove_one(). However, the fst_tx_task or fst_int_task
may still be running or pending, leading to use-after-free bugs when the
already freed fst_card_info is accessed in fst_process_tx_work_q() or
fst_process_int_work_q().
A typical race condition is depicted below:
CPU 0 (cleanup) | CPU 1 (tasklet)
| fst_start_xmit()
fst_remove_one() | tasklet_schedule()
unregister_hdlc_device()|
| fst_process_tx_work_q() //handler
kfree(card) //free | do_bottom_half_tx()
| card-> //use
The following KASAN trace was captured:
==================================================================
BUG: KASAN: slab-use-after-free in do_bottom_half_tx+0xb88/0xd00
Read of size 4 at addr ffff88800aad101c by task ksoftirqd/3/32
...
Call Trace:
<IRQ>
dump_stack_lvl+0x55/0x70
print_report+0xcb/0x5d0
? do_bottom_half_tx+0xb88/0xd00
kasan_report+0xb8/0xf0
? do_bottom_half_tx+0xb88/0xd00
do_bottom_half_tx+0xb88/0xd00
? _raw_spin_lock_irqsave+0x85/0xe0
? __pfx__raw_spin_lock_irqsave+0x10/0x10
? __pfx___hrtimer_run_queues+0x10/0x10
fst_process_tx_work_q+0x67/0x90
tasklet_action_common+0x1fa/0x720
? hrtimer_interrupt+0x31f/0x780
handle_softirqs+0x176/0x530
__irq_exit_rcu+0xab/0xe0
sysvec_apic_timer_interrupt+0x70/0x80
...
Allocated by task 41 on cpu 3 at 72.330843s:
kasan_save_stack+0x24/0x50
kasan_save_track+0x17/0x60
__kasan_kmalloc+0x7f/0x90
fst_add_one+0x1a5/0x1cd0
local_pci_probe+0xdd/0x190
pci_device_probe+0x341/0x480
really_probe+0x1c6/0x6a0
__driver_probe_device+0x248/0x310
driver_probe_device+0x48/0x210
__device_attach_driver+0x160/0x320
bus_for_each_drv+0x101/0x190
__device_attach+0x198/0x3a0
device_initial_probe+0x78/0xa0
pci_bus_add_device+0x81/0xc0
pci_bus_add_devices+0x7e/0x190
enable_slot+0x9b9/0x1130
acpiphp_check_bridge.part.0+0x2e1/0x460
acpiphp_hotplug_notify+0x36c/0x3c0
acpi_device_hotplug+0x203/0xb10
acpi_hotplug_work_fn+0x59/0x80
...
Freed by task 41 on cpu 1 at 75.138639s:
kasan_save_stack+0x24/0x50
kasan_save_track+0x17/0x60
kasan_save_free_info+0x3b/0x60
__kasan_slab_free+0x43/0x70
kfree+0x135/0x410
fst_remove_one+0x2ca/0x540
pci_device_remove+0xa6/0x1d0
device_release_driver_internal+0x364/0x530
pci_stop_bus_device+0x105/0x150
pci_stop_and_remove_bus_device+0xd/0x20
disable_slot+0x116/0x260
acpiphp_disable_and_eject_slot+0x4b/0x190
acpiphp_hotplug_notify+0x230/0x3c0
acpi_device_hotplug+0x203/0xb10
acpi_hotplug_work_fn+0x59/0x80
...
The buggy address belongs to the object at ffff88800aad1000
which belongs to the cache kmalloc-1k of size 1024
The buggy address is located 28 bytes inside of
freed 1024-byte region
The buggy address belongs to the physical page:
page: refcount:0 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0xaad0
head: order:3 mapcount:0 entire_mapcount:0 nr_pages_mapped:0 pincount:0
flags: 0x100000000000040(head|node=0|zone=1)
page_type: f5(slab)
raw: 0100000000000040 ffff888007042dc0 dead000000000122 0000000000000000
raw: 0000000000000000 0000000080100010 00000000f5000000 0000000000000000
head: 0100000000000040 ffff888007042dc0 dead000000000122 0000000000000000
head: 0000000000000000 0000000080100010 00000000f5000000 0000000000000000
head: 0100000000000003 ffffea00002ab401 00000000ffffffff 00000000ffffffff
head: 0000000000000000 0000000000000000 00000000ffffffff 0000000000000000
page dumped because: kasan: bad access detected
Memory state around the buggy address:
ffff88800aad0f00: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
ffff88800aad0f80: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
>ffff88800aad1000: fa fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
^
ffff88800aad1080: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
ffff88800aad1100: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
==================================================================
Fix this by ensuring that both fst_tx_task and fst_int_task are properly
canceled before the fst_card_info is released. Add tasklet_kill() in
fst_remove_one() to synchronize with any pending or running tasklets.
Since unregister_hdlc_device() stops data transmission and reception,
and fst_disable_intr() prevents further interrupts, it is appropriate
to place tasklet_kill() after these calls.
The bugs were identified through static analysis. To reproduce the issue
and validate the fix, a FarSync T-series card was simulated in QEMU and
delays(e.g., mdelay()) were introduced within the tasklet handler to
increase the likelihood of triggering the race condition.
Fixes: 2f623aaf9f ("net: farsync: Fix kmemleak when rmmods farsync")
Signed-off-by: Duoming Zhou <duoming@zju.edu.cn>
Reviewed-by: Jijie Shao <shaojijie@huawei.com>
Link: https://patch.msgid.link/20260219124637.72578-1-duoming@zju.edu.cn
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The infracfg-nao register space at 0x1020e000 has different registers
than the infracfg space at 0x10001000, and most importantly, doesn't
contain any clock controls. Therefore it shouldn't use the same
compatible used for the mt8365 infracfg clocks driver:
mediatek,mt8365-infracfg. Since it currently does, probe errors are
reported in the kernel logs:
[ 0.245959] Failed to register clk ifr_pmic_tmr: -EEXIST
[ 0.245998] clk-mt8365 1020e000.infracfg: probe with driver clk-mt8365 failed with error -17
This register space is used only as a syscon for bus control by the
power domain controller, so in order to properly describe it and fix the
errors, set its compatible to a distinct compatible used exclusively as
a syscon, drop the clock-cells, and while at it rename the node to
'syscon' following the naming convention.
Fixes: 6ff9453765 ("arm64: dts: mediatek: Initial mt8365-evk support")
Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Reviewed-by: David Lechner <dlechner@baylibre.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Add aliases for mmc nodes, so that the eMMC and SDCard host controllers
get enumerated in a consistent order for the Mediatek Genio 350-EVK
board.
Also, reorder serial0 so all aliases are sorted alphanumerically.
Signed-off-by: Louis-Alexis Eyraud <louisalexis.eyraud@collabora.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Add aliases for mmc nodes, so that the eMMC and SDCard host controllers
get enumerated in a consistent order for the Radxa NIO-12L board.
Also, reorder ethernet0 so all aliases are sorted alphanumerically.
Signed-off-by: Louis-Alexis Eyraud <louisalexis.eyraud@collabora.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Add aliases for mmc nodes, so that the eMMC and SDCard host controllers
get enumerated in a consistent order for the Mediatek Genio 1200-EVK
board.
Also, reorder serial0 so all aliases are sorted alphanumerically.
Signed-off-by: Louis-Alexis Eyraud <louisalexis.eyraud@collabora.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
There is nothing connected to xhci1 in this design, nor in the actual
end devices.
Disable xhci1. Keep the USB PHY enabled, as it is a shared PHY and used
for pcie1.
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
This driver currently only supports builds against a PIC32 target. Now
that commit b8694faa1a ("pinctrl: pic32: update include to use pic32.h
from platform_data") is merged, it's possible to compile this driver on
other architectures.
To avoid future breakage of this driver in the future, let's update the
Kconfig so that it can be built with COMPILE_TEST enabled on all
architectures.
Signed-off-by: Brian Masney <bmasney@redhat.com>
Reviewed-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Signed-off-by: Linus Walleij <linusw@kernel.org>
Address the following warning from checkpatch.pl:
ERROR: need consistent spacing around '+' (ctx:WxV)
Fixes: 2ba384e6c3 ("pinctrl: pinctrl-pic32: Add PIC32 pin control driver")
Signed-off-by: Brian Masney <bmasney@redhat.com>
Reviewed-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Signed-off-by: Linus Walleij <linusw@kernel.org>
Address the following warning from checkpatch.pl:
WARNING: Prefer 'unsigned int' to bare use of 'unsigned'
Fixes: 2ba384e6c3 ("pinctrl: pinctrl-pic32: Add PIC32 pin control driver")
Signed-off-by: Brian Masney <bmasney@redhat.com>
Reviewed-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Signed-off-by: Linus Walleij <linusw@kernel.org>
If a recursive call to ep_loop_check_proc() hits the `result = INT_MAX`,
an integer overflow will occur in the calling ep_loop_check_proc() at
`result = max(result, ep_loop_check_proc(ep_tovisit, depth + 1) + 1)`,
breaking the recursion depth check.
Fix it by using a different placeholder value that can't lead to an
overflow.
Reported-by: Guenter Roeck <linux@roeck-us.net>
Fixes: f2e467a482 ("eventpoll: Fix semi-unbounded recursion")
Cc: stable@vger.kernel.org
Signed-off-by: Jann Horn <jannh@google.com>
Link: https://patch.msgid.link/20260223-epoll-int-overflow-v1-1-452f35132224@google.com
Signed-off-by: Christian Brauner <brauner@kernel.org>
syzbot reported a recursive lock warning in rds_tcp_get_peer_sport() as
it calls inet6_getname() which acquires the socket lock that was already
held by __release_sock().
kworker/u8:6/2985 is trying to acquire lock:
ffff88807a07aa20 (k-sk_lock-AF_INET6){+.+.}-{0:0}, at: lock_sock include/net/sock.h:1709 [inline]
ffff88807a07aa20 (k-sk_lock-AF_INET6){+.+.}-{0:0}, at: inet6_getname+0x15d/0x650 net/ipv6/af_inet6.c:533
but task is already holding lock:
ffff88807a07aa20 (k-sk_lock-AF_INET6){+.+.}-{0:0}, at: lock_sock include/net/sock.h:1709 [inline]
ffff88807a07aa20 (k-sk_lock-AF_INET6){+.+.}-{0:0}, at: tcp_sock_set_cork+0x2c/0x2e0 net/ipv4/tcp.c:3694
lock_sock_nested+0x48/0x100 net/core/sock.c:3780
lock_sock include/net/sock.h:1709 [inline]
inet6_getname+0x15d/0x650 net/ipv6/af_inet6.c:533
rds_tcp_get_peer_sport net/rds/tcp_listen.c:70 [inline]
rds_tcp_conn_slots_available+0x288/0x470 net/rds/tcp_listen.c:149
rds_recv_hs_exthdrs+0x60f/0x7c0 net/rds/recv.c:265
rds_recv_incoming+0x9f6/0x12d0 net/rds/recv.c:389
rds_tcp_data_recv+0x7f1/0xa40 net/rds/tcp_recv.c:243
__tcp_read_sock+0x196/0x970 net/ipv4/tcp.c:1702
rds_tcp_read_sock net/rds/tcp_recv.c:277 [inline]
rds_tcp_data_ready+0x369/0x950 net/rds/tcp_recv.c:331
tcp_rcv_established+0x19e9/0x2670 net/ipv4/tcp_input.c:6675
tcp_v6_do_rcv+0x8eb/0x1ba0 net/ipv6/tcp_ipv6.c:1609
sk_backlog_rcv include/net/sock.h:1185 [inline]
__release_sock+0x1b8/0x3a0 net/core/sock.c:3213
Reading from the socket struct directly is safe from possible paths. For
rds_tcp_accept_one(), the socket has just been accepted and is not yet
exposed to concurrent access. For rds_tcp_conn_slots_available(), direct
access avoids the recursive deadlock seen during backlog processing
where the socket lock is already held from the __release_sock().
However, rds_tcp_conn_slots_available() is also called from the normal
softirq path via tcp_data_ready() where the lock is not held. This is
also safe because inet_dport is a stable 16 bits field. A READ_ONCE()
annotation as the value might be accessed lockless in a concurrent
access context.
Note that it is also safe to call rds_tcp_conn_slots_available() from
rds_conn_shutdown() because the fan-out is disabled.
Fixes: 9d27a0fb12 ("net/rds: Trigger rds_send_ping() more than once")
Reported-by: syzbot+5efae91f60932839f0a5@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=5efae91f60932839f0a5
Signed-off-by: Fernando Fernandez Mancera <fmancera@suse.de>
Reviewed-by: Allison Henderson <achender@kernel.org>
Link: https://patch.msgid.link/20260219075738.4403-1-fmancera@suse.de
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
In mesh_rx_csa_frame(), elems->mesh_chansw_params_ie is dereferenced
at lines 1638 and 1642 without a prior NULL check:
ifmsh->chsw_ttl = elems->mesh_chansw_params_ie->mesh_ttl;
...
pre_value = le16_to_cpu(elems->mesh_chansw_params_ie->mesh_pre_value);
The mesh_matches_local() check above only validates the Mesh ID,
Mesh Configuration, and Supported Rates IEs. It does not verify the
presence of the Mesh Channel Switch Parameters IE (element ID 118).
When a received CSA action frame omits that IE, ieee802_11_parse_elems()
leaves elems->mesh_chansw_params_ie as NULL, and the unconditional
dereference causes a kernel NULL pointer dereference.
A remote mesh peer with an established peer link (PLINK_ESTAB) can
trigger this by sending a crafted SPECTRUM_MGMT/CHL_SWITCH action frame
that includes a matching Mesh ID and Mesh Configuration IE but omits the
Mesh Channel Switch Parameters IE. No authentication beyond the default
open mesh peering is required.
Crash confirmed on kernel 6.17.0-5-generic via mac80211_hwsim:
BUG: kernel NULL pointer dereference, address: 0000000000000000
Oops: Oops: 0000 [#1] SMP NOPTI
RIP: 0010:ieee80211_mesh_rx_queued_mgmt+0x143/0x2a0 [mac80211]
CR2: 0000000000000000
Fix by adding a NULL check for mesh_chansw_params_ie after
mesh_matches_local() returns, consistent with how other optional IEs
are guarded throughout the mesh code.
The bug has been present since v3.13 (released 2014-01-19).
Fixes: 8f2535b92d ("mac80211: process the CSA frame for mesh accordingly")
Cc: stable@vger.kernel.org
Signed-off-by: Vahagn Vardanian <vahagn@redrays.io>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Glymur is a codename of Qualcomm SoC, not an acronym.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Linus Walleij <linusw@kernel.org>
Fix below smatch warning:
drivers/infiniband/hw/bng_re/bng_dev.c:270
bng_re_dev_init() warn: missing unwind goto?
Current bng_re_dev_init function is not having clear unwinding code.
So, added proper unwinding with ladder.
Fixes: 4f830cd8d7 ("RDMA/bng_re: Add infrastructure for enabling Firmware channel")
Reported-by: Simon Horman <horms@kernel.org>
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <error27@gmail.com>
Closes: https://lore.kernel.org/r/202601010413.sWadrQel-lkp@intel.com/
Signed-off-by: Siva Reddy Kallam <siva.kallam@broadcom.com>
Link: https://patch.msgid.link/20260218091246.1764808-3-siva.kallam@broadcom.com
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Add pinctrl driver for TLMM block found in the Eliza SoC.
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Reviewed-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Abel Vesa <abel.vesa@oss.qualcomm.com>
Signed-off-by: Linus Walleij <linusw@kernel.org>
Document the Top Level Mode Multiplexer on the Eliza Platform.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Reviewed-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Abel Vesa <abel.vesa@oss.qualcomm.com>
Signed-off-by: Linus Walleij <linusw@kernel.org>
Fix below smatch warning:
drivers/infiniband/hw/bng_re/bng_dev.c:113
bng_re_net_ring_free() warn: variable dereferenced before check 'rdev'
(see line 107)
current driver has unnessary validity checks. So, removing these
unnessary validity checks.
Fixes: 4f830cd8d7 ("RDMA/bng_re: Add infrastructure for enabling Firmware channel")
Fixes: 745065770c ("RDMA/bng_re: Register and get the resources from bnge driver")
Fixes: 04e031ff6e ("RDMA/bng_re: Initialize the Firmware and Hardware")
Fixes: d0da769c19 ("RDMA/bng_re: Add Auxiliary interface")
Reported-by: Simon Horman <horms@kernel.org>
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <error27@gmail.com>
Closes: https://lore.kernel.org/r/202601010413.sWadrQel-lkp@intel.com/
Signed-off-by: Siva Reddy Kallam <siva.kallam@broadcom.com>
Link: https://patch.msgid.link/20260218091246.1764808-2-siva.kallam@broadcom.com
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Add "ti,am62l-padconf" compatible string for the AM62L SoC, which
requires register configurations to be restored during system resume
after suspend to RAM (RTC only + DDR mode). This reuses the j7200
configuration which includes the PCS_CONTEXT_LOSS_OFF flag needed for
proper restoration.
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Signed-off-by: Kendall Willis <k-willis@ti.com>
Reviewed-by: Dhruva Gole <d-gole@ti.com>
Signed-off-by: Linus Walleij <linusw@kernel.org>
RoCE GID entries become stale when netdev properties change during the
IB device registration window. This is reproducible with a udev rule
that sets a MAC address when a VF netdev appears:
ACTION=="add", SUBSYSTEM=="net", KERNEL=="eth4", \
RUN+="/sbin/ip link set eth4 address 88:22:33:44:55:66"
After VF creation, show_gids displays GIDs derived from the original
random MAC rather than the configured one.
The root cause is a race between netdev event processing and device
registration:
CPU 0 (driver) CPU 1 (udev/workqueue)
────────────── ──────────────────────
ib_register_device()
ib_cache_setup_one()
gid_table_setup_one()
_gid_table_setup_one()
← GID table allocated
rdma_roce_rescan_device()
← GIDs populated with
OLD MAC
ip link set eth4 addr NEW_MAC
NETDEV_CHANGEADDR queued
netdevice_event_work_handler()
ib_enum_all_roce_netdevs()
← Iterates DEVICE_REGISTERED
← Device NOT marked yet, SKIP!
enable_device_and_get()
xa_set_mark(DEVICE_REGISTERED)
← Too late, event was lost
The netdev event handler uses ib_enum_all_roce_netdevs() which only
iterates devices marked DEVICE_REGISTERED. However, this mark is set
late in the registration process, after the GID cache is already
populated. Events arriving in this window are silently dropped.
Fix this by introducing a new xarray mark DEVICE_GID_UPDATES that is
set immediately after the GID table is allocated and initialized. Use
the new mark in ib_enum_all_roce_netdevs() function to iterate devices
instead of DEVICE_REGISTERED.
This is safe because:
- After _gid_table_setup_one(), all required structures exist (port_data,
immutable, cache.gid)
- The GID table mutex serializes concurrent access between the initial
rescan and event handlers
- Event handlers correctly update stale GIDs even when racing with rescan
- The mark is cleared in ib_cache_cleanup_one() before teardown
This also fixes similar races for IP address events (inetaddr_event,
inet6addr_event) which use the same enumeration path.
Fixes: 0df91bb673 ("RDMA/devices: Use xarray to store the client_data")
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Link: https://patch.msgid.link/20260127093839.126291-1-jiri@resnulli.us
Reported-by: syzbot+881d65229ca4f9ae8c84@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=881d65229ca4f9ae8c84
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Verify Wacom devices set INPUT_PROP_DIRECT on display devices and
INPUT_PROP_POINTER on opaque devices. Verify INPUT_PROP_POINTER
is not set on display devices and INPUT_PROP_DIRECT is not set
on opaque devices.
Moved test_prop_pointer into TestOpaqueTablet. Created a
DirectTabletTest mixin class for test_prop_direct that can be
inherited by display tablet test classes.Used DirectTabletTest
for TestDTH2452Tablet case.
Signed-off-by: Alex Tran <alex.t.tran@gmail.com>
Tested-by: Erin Skomra <erin.skomra@wacom.com>
Reviewed-by: Erin Skomra <erin.skomra@wacom.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Battery reporting does not work for the Apple Magic Trackpad 2 if it is
connected via USB. The current hid descriptor fixup code checks for a
hid descriptor length of exactly 83 bytes. If the hid descriptor is
larger, which is the case for newer apple mice, the fixup is not
applied.
This fix checks for hid descriptor sizes greater/equal 83 bytes which
applies the fixup for newer devices as well.
Signed-off-by: Julius Lehmann <lehmanju@devpi.de>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
The r9a09g056_mod_clks array is sorted by CPG_CLKON register number and
bit position. Move the RSPI 0/1/2 module clock entries to their correct
position to restore the array sort order.
Fixes: 1f76689d17 ("clk: renesas: r9a09g056: Add entries for RSCIs")
Signed-off-by: Ovidiu Panait <ovidiu.panait.rb@renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://patch.msgid.link/20260125192706.27099-2-ovidiu.panait.rb@renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
The r9a09g057_mod_clks array is sorted by CPG_CLKON register number and
bit position. Move the RTC and RSPI module clock entries to their
correct position to restore the array sort order.
Fixes: 2efea3b35c ("clk: renesas: r9a09g057: Add entries for RSCIs")
Signed-off-by: Ovidiu Panait <ovidiu.panait.rb@renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://patch.msgid.link/20260125190314.26729-1-ovidiu.panait.rb@renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
