create_user_mr() has correct code to count the number of null keys
used to fill in a hole for the memory map. However, fill_indir()
does not follow the same to cap the range up to the 1GB limit
correspondingly. Fill in more null keys for the gaps in between,
so that null keys are correctly populated.
Fixes: 94abbccdf2 ("vdpa/mlx5: Add shared memory registration code")
Cc: stable@vger.kernel.org
Reported-by: Cong Meng <cong.meng@oracle.com>
Signed-off-by: Si-Wei Liu <si-wei.liu@oracle.com>
Signed-off-by: Dragos Tatulea <dtatulea@nvidia.com>
Acked-by: Eugenio Pérez <eperezma@redhat.com>
Message-Id: <20250220193732.521462-2-dtatulea@nvidia.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
mlx5_vdpa_dev_add() doesn’t initialize mvdev->actual_features. It’s
initialized later by mlx5_vdpa_set_driver_features(). However,
mlx5_vdpa_get_config() depends on the VIRTIO_F_VERSION_1 flag in
actual_features, to return data with correct endianness. When it’s called
before mlx5_vdpa_set_driver_features(), the data are incorrectly returned
as big-endian on big-endian machines, while QEMU then interprets them as
little-endian.
The fix is to initialize this VIRTIO_F_VERSION_1 as early as possible,
especially considering that mlx5_vdpa_dev_add() insists on this flag to
always be set anyway.
Signed-off-by: Konstantin Shkolnyy <kshk@linux.ibm.com>
Message-Id: <20250204173127.166673-1-kshk@linux.ibm.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Dragos Tatulea <dtatulea@nvidia.com>
Acked-by: Jason Wang <jasowang@redhat.com>
If vhost_scsi_set_endpoint is called multiple times without a
vhost_scsi_clear_endpoint between them, we can hit multiple bugs
found by Haoran Zhang:
1. Use-after-free when no tpgs are found:
This fixes a use after free that occurs when vhost_scsi_set_endpoint is
called more than once and calls after the first call do not find any
tpgs to add to the vs_tpg. When vhost_scsi_set_endpoint first finds
tpgs to add to the vs_tpg array match=true, so we will do:
vhost_vq_set_backend(vq, vs_tpg);
...
kfree(vs->vs_tpg);
vs->vs_tpg = vs_tpg;
If vhost_scsi_set_endpoint is called again and no tpgs are found
match=false so we skip the vhost_vq_set_backend call leaving the
pointer to the vs_tpg we then free via:
kfree(vs->vs_tpg);
vs->vs_tpg = vs_tpg;
If a scsi request is then sent we do:
vhost_scsi_handle_vq -> vhost_scsi_get_req -> vhost_vq_get_backend
which sees the vs_tpg we just did a kfree on.
2. Tpg dir removal hang:
This patch fixes an issue where we cannot remove a LIO/target layer
tpg (and structs above it like the target) dir due to the refcount
dropping to -1.
The problem is that if vhost_scsi_set_endpoint detects a tpg is already
in the vs->vs_tpg array or if the tpg has been removed so
target_depend_item fails, the undepend goto handler will do
target_undepend_item on all tpgs in the vs_tpg array dropping their
refcount to 0. At this time vs_tpg contains both the tpgs we have added
in the current vhost_scsi_set_endpoint call as well as tpgs we added in
previous calls which are also in vs->vs_tpg.
Later, when vhost_scsi_clear_endpoint runs it will do
target_undepend_item on all the tpgs in the vs->vs_tpg which will drop
their refcount to -1. Userspace will then not be able to remove the tpg
and will hang when it tries to do rmdir on the tpg dir.
3. Tpg leak:
This fixes a bug where we can leak tpgs and cause them to be
un-removable because the target name is overwritten when
vhost_scsi_set_endpoint is called multiple times but with different
target names.
The bug occurs if a user has called VHOST_SCSI_SET_ENDPOINT and setup
a vhost-scsi device to target/tpg mapping, then calls
VHOST_SCSI_SET_ENDPOINT again with a new target name that has tpgs we
haven't seen before (target1 has tpg1 but target2 has tpg2). When this
happens we don't teardown the old target tpg mapping and just overwrite
the target name and the vs->vs_tpg array. Later when we do
vhost_scsi_clear_endpoint, we are passed in either target1 or target2's
name and we will only match that target's tpgs when we loop over the
vs->vs_tpg. We will then return from the function without doing
target_undepend_item on the tpgs.
Because of all these bugs, it looks like being able to call
vhost_scsi_set_endpoint multiple times was never supported. The major
user, QEMU, already has checks to prevent this use case. So to fix the
issues, this patch prevents vhost_scsi_set_endpoint from being called
if it's already successfully added tpgs. To add, remove or change the
tpg config or target name, you must do a vhost_scsi_clear_endpoint
first.
Fixes: 25b98b64e2 ("vhost scsi: alloc cmds per vq instead of session")
Fixes: 4f7f46d32c ("tcm_vhost: Use vq->private_data to indicate if the endpoint is setup")
Reported-by: Haoran Zhang <wh1sper@zju.edu.cn>
Closes: https://lore.kernel.org/virtualization/e418a5ee-45ca-4d18-9b5d-6f8b6b1add8e@oracle.com/T/#me6c0041ce376677419b9b2563494172a01487ecb
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20250129210922.121533-1-michael.christie@oracle.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Stefano Garzarella <sgarzare@redhat.com>
when we build tools/virtio, meet below error information.
cc -g -O2 -Werror -Wno-maybe-uninitialized -Wall -I. -I../include/
-I ../../usr/include/ -Wno-pointer-sign -fno-strict-overflow
-fno-strict-aliasing -fno-common -MMD
-U_FORTIFY_SOURCE -include ../../include/linux/kconfig.h
-mfunction-return=thunk
-fcf-protection=none -mindirect-branch-register -pthread
-c -o virtio_ring.o ../../drivers/virtio/virtio_ring.c
../../drivers/virtio/virtio_ring.c: in function 'vring_need_unmap_buffer':
../../drivers/virtio/virtio_ring.c:294:54: error:'DMA_MAPPING_ERROR'Undeclared (first use within this function)
294 | return vring->use_dma_api && (extra->addr != DMA_MAPPING_ERROR);
| ^~~~~~~~~~~~~~~~~
../../drivers/virtio/virtio_ring.c:294:54: Note: Each undeclared identifier is only reported once within the function it appears in
../../drivers/virtio/virtio_ring.c: in function 'vring_map_one_sg':
../../drivers/virtio/virtio_ring.c:369:24: error:Implicit declaration function'sg_dma_len' [-Wimplicit-function-declaration]
369 | *len = sg_dma_len(sg);
| ^~~~~~~~~~
../../drivers/virtio/virtio_ring.c: in function'virtqueue_add_desc_split':
../../drivers/virtio/virtio_ring.c:518:37: error:'DMA_MAPPING_ERROR'Undeclared (first use within this function)
518 | extra[i].addr = premapped ? DMA_MAPPING_ERROR : addr;
| ^~~~~~~~~~~~~~~~~
../../drivers/virtio/virtio_ring.c: in function'virtqueue_add_indirect_packed':
../../drivers/virtio/virtio_ring.c:1370:61: error: 'DMA_MAPPING_ERROR'Undeclared (first use within this function)
1370 | extra[i].addr = premapped ? DMA_MAPPING_ERROR : addr;
| ^~~~~~~~~~~~~~~~~
../../drivers/virtio/virtio_ring.c: in function'virtqueue_add_packed':
../../drivers/virtio/virtio_ring.c:1535:41: error:'DMA_MAPPING_ERROR'Undeclared (first use within this function)
1535 | DMA_MAPPING_ERROR : addr;
| ^~~~~~~~~~~~~~~~~
to fix, add DMA_MAPPING_ERROR define for virtio test.
Fixes: c7e1b422af ("virtio_ring: perform premapped operations based on per-buffer")
Signed-off-by: Yufeng Wang <wangyufeng@kylinos.cn>
Message-Id: <20250113100300.174382-1-wangyufeng@kylinos.cn>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
xfs_buf_stale already set b_lru_ref to 0, and thus prevents the buffer
from moving to the LRU. Remove the duplicate check.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
The buffer cache keeps a bt_io_count per-CPU counter to track all
in-flight I/O, which is used to ensure no I/O is in flight when
unmounting the file system.
For most I/O we already keep track of inflight I/O at higher levels:
- for synchronous I/O (xfs_buf_read/xfs_bwrite/xfs_buf_delwri_submit),
the caller has a reference and waits for I/O completions using
xfs_buf_iowait
- for xfs_buf_delwri_submit_nowait the only caller (AIL writeback)
tracks the log items that the buffer attached to
This only leaves only xfs_buf_readahead_map as a submitter of
asynchronous I/O that is not tracked by anything else. Replace the
bt_io_count per-cpu counter with a more specific bt_readahead_count
counter only tracking readahead I/O. This allows to simply increment
it when submitting readahead I/O and decrementing it when it completed,
and thus simplify xfs_buf_rele and remove the needed for the
XBF_NO_IOACCT flags and the XFS_BSTATE_IN_FLIGHT buffer state.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
xfs_buf_readahead_map is the only caller of xfs_buf_read_map and thus
_xfs_buf_read that is not synchronous. Split it from xfs_buf_read_map
so that the asynchronous path is self-contained and the now purely
synchronous xfs_buf_read_map / _xfs_buf_read implementation can be
simplified.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
Currently all metadata I/O completions happen in the m_buf_workqueue
workqueue. But for synchronous I/O (i.e. all buffer reads) there is no
need for that, as there always is a called in process context that is
waiting for the I/O. Factor out the guts of xfs_buf_ioend into a
separate helper and call it from xfs_buf_iowait to avoid a double
an extra context switch to the workqueue.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
Mohsin Bashir says:
====================
eth: fbnic: Update fbnic driver
This patchset makes following trivial changes to the fbnic driver:
1) Add coverage for PCIe CSRs in the ethtool register dump.
2) Consolidate the PUL_USER CSR section, update the end boundary,
and remove redundant definition of the end boundary.
3) Update the return value in kdoc for fbnic_netdev_alloc().
====================
Link: https://patch.msgid.link/20250221201813.2688052-1-mohsin.bashr@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Move PUL_USER CSRs in the relevant section, update the end boundary
address, and remove the redundant definition of end boundary.
Signed-off-by: Mohsin Bashir <mohsin.bashr@gmail.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Provide coverage to PCIe registers in ethtool register dump
Signed-off-by: Mohsin Bashir <mohsin.bashr@gmail.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
params->total_weight is not initialized during bind and not updated when
the bound cdev changes. The cooling device weight will not be used due
to the uninitialized total_weight, until an update via sysfs is
triggered.
The bound cdevs are updated during thermal zone registration, where each
cooling device will be bound to the thermal zone one by one, but
power_allocator_bind() can be called without an additional cdev update
when manually changing the policy of a thermal zone via sysfs.
Add a new function to handle weight update logic, including updating
total_weight, and call it when bind, weight changes, and cdev updates to
ensure total_weight is always correct.
Fixes: a3cd6db4cc ("thermal: gov_power_allocator: Support new update callback of weights")
Signed-off-by: Yu-Che Cheng <giver@chromium.org>
Link: https://patch.msgid.link/20250222-fix-power-allocator-weight-v2-1-a94de86b685a@chromium.org
[ rjw: Changelog edits ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Since thermal_of_should_bind() terminates the loop after processing
the first child found in cooling-maps, it will never match more than
one cdev to a given trip point which is incorrect, as there may be
cooling-maps associating one trip point with multiple cooling devices.
Address this by letting the loop continue until either all
children have been processed or a matching one has been found.
To avoid adding conditionals or goto statements, put the loop in
question into a separate function and make that function return
right away after finding a matching cooling-maps entry.
Fixes: 94c6110b0b ("thermal/of: Use the .should_bind() thermal zone callback")
Link: https://lore.kernel.org/linux-pm/20250219-fix-thermal-of-v1-1-de36e7a590c4@chromium.org/
Reported-by: Yu-Che Cheng <giver@chromium.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Yu-Che Cheng <giver@chromium.org>
Tested-by: Yu-Che Cheng <giver@chromium.org>
Reviewed-by: Lukasz Luba <lukasz.luba@arm.com>
Tested-by: Lukasz Luba <lukasz.luba@arm.com>
Link: https://patch.msgid.link/2788228.mvXUDI8C0e@rjwysocki.net
* Split devres APIs to a separate header (linux/device/devres.h)
* Move IOMEM_ERR_PTR() to err.h to avoid unneeded loops
* Introduce devm_kmemdup_array()
* Use devm_kmemdup_array() in input, IIO, and pinctrl subsystems
The following is an automated git shortlog grouped by driver:
baytrail:
- copy communities using devm_kmemdup_array()
cherryview:
- use devm_kmemdup_array()
devres:
- Introduce devm_kmemdup_array()
driver core:
- Split devres APIs to device/devres.h
err.h:
- move IOMEM_ERR_PTR() to err.h
iio:
- adc: xilinx-xadc-core: use devm_kmemdup_array()
- imu: st_lsm9ds0: Replace device.h with what is needed
input:
- ipaq-micro-keys: use devm_kmemdup_array()
- sparse-keymap: use devm_kmemdup_array()
intel:
- copy communities using devm_kmemdup_array()
Merge patch series "Split devres APIs to device/devres.h and introduce devm_kmemdup_array()":
- Merge patch series "Split devres APIs to device/devres.h and introduce devm_kmemdup_array()"
pxa2xx:
- use devm_kmemdup_array()
tangier:
- use devm_kmemdup_array()
-----BEGIN PGP SIGNATURE-----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=j1xo
-----END PGP SIGNATURE-----
Merge tag 'ib-devres-iio-input-pinctrl-v6.15' into intel/pinctrl
There are a few Intel pin control drivers that are affected
by the devm_kmemdup_array() conversion, merge the ib-devres-iio-input-pinctrl
for making development going smoothly.
* Split devres APIs to a separate header (linux/device/devres.h)
* Move IOMEM_ERR_PTR() to err.h to avoid unneeded loops
* Introduce devm_kmemdup_array()
* Use devm_kmemdup_array() in input, IIO, and pinctrl subsystems
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
This work had been triggered by a report that commit 0611a640e6
("eventpoll: prefer kfree_rcu() in __ep_remove()") had caused the
critical-jOPS metric of the SPECjbb 2015 benchmark [1] to drop by around
50% even though it generally reduced kernel overhead. Indeed, it was
found during further investigation that the total interrupt rate while
running the SPECjbb workload had fallen as a result of that commit by
55% and the local timer interrupt rate had fallen by almost 80%.
That turned out to cause the menu cpuidle governor to select the deepest
idle state supplied by the cpuidle driver (intel_idle) much more often
which added significantly more idle state latency to the workload and
that led to the decrease of the critical-jOPS score.
Interestingly enough, this problem was not visible when the teo cpuidle
governor was used instead of menu, so it appeared to be specific to the
latter. CPU wakeup event statistics collected while running the
workload indicated that the menu governor was effectively ignoring non-
timer wakeup information and all of its idle state selection decisions
appeared to be based on timer wakeups only. Thus, it appeared that the
reduction of the local timer interrupt rate caused the governor to
predict a idle duration much more often while running the workload and
the deepest idle state was selected significantly more often as a result
of that.
A subsequent inspection of the get_typical_interval() function in the
menu governor indicated that it might return UINT_MAX too often which
then caused the governor's decisions to be based entirely on information
related to timers.
Generally speaking, UINT_MAX is returned by get_typical_interval() if it
cannot make a prediction based on the most recent idle intervals data
with sufficiently high confidence, but at least in some cases this means
that useful information is not taken into account at all which may lead
to significant idle state selection mistakes. Moreover, this is not
really unlikely to happen.
One issue with get_typical_interval() is that, when it eliminates
outliers from the sample set in an attempt to reduce the standard
deviation (and so improve the prediction confidence), it does that by
dropping high-end samples only, while samples at the low end of the set
are retained. However, the samples at the low end very well may be the
outliers and they should be eliminated from the sample set instead of
the high-end samples. Accordingly, the likelihood of making a
meaningful idle duration prediction can be improved by making it also
eliminate low-end samples if they are farther from the average than
high-end samples.
Another issue is that get_typical_interval() gives up after eliminating
1/4 of the samples if the standard deviation is still not as low as
desired (within 1/6 of the average or within 20 us if the average is
close to 0), but the remaining samples in the set still represent useful
information at that point and discarding them altogether may lead to
suboptimal idle state selection.
For instance, the largest idle duration value in the get_typical_interval()
data set is the maximum idle duration observed recently and it is likely
that the upcoming idle duration will not exceed it. Therefore, in the
absence of a better choice, this value can be used as an upper bound on
the target residency of the idle state to select.
* cpuidle-menu:
cpuidle: menu: Update documentation after get_typical_interval() changes
cpuidle: menu: Avoid discarding useful information
cpuidle: menu: Eliminate outliers on both ends of the sample set
cpuidle: menu: Tweak threshold use in get_typical_interval()
cpuidle: menu: Use one loop for average and variance computations
cpuidle: menu: Drop a redundant local variable
Since commit 18734958e9 ("intel_idle: Use ACPI _CST for processor models
without C-state tables") the intel_idle driver has had the ability to use
the ACPI _CST to populate C-states when the processor model is not
recognized.
However, even when the processor model is recognized (native mode) there
are cases where it is useful to make the driver ignore the per-CPU idle
states in lieu of ACPI C-states (such as specific application performance).
Add a new 'no_native' module parameter to provide this functionality.
Signed-off-by: David Arcari <darcari@redhat.com>
Link: https://patch.msgid.link/20250220151120.1131122-1-darcari@redhat.com
Reviewed-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
[ rjw: Spell CPU in capitals ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The documentation of the menu cpuidle governor needs to be updated
to match the code behavior after some changes made recently.
No functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Christian Loehle <christian.loehle@arm.com>
Link: https://patch.msgid.link/4998484.31r3eYUQgx@rjwysocki.net
[ rjw: More specific subject, two typos fixed in the changelog ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
When giving up on making a high-confidence prediction,
get_typical_interval() always returns UINT_MAX which means that the
next idle interval prediction will be based entirely on the time till
the next timer. However, the information represented by the most
recent intervals may not be completely useless in those cases.
Namely, the largest recent idle interval is an upper bound on the
recently observed idle duration, so it is reasonable to assume that
the next idle duration is unlikely to exceed it. Moreover, this is
still true after eliminating the suspected outliers if the sample
set still under consideration is at least as large as 50% of the
maximum sample set size.
Accordingly, make get_typical_interval() return the current maximum
recent interval value in that case instead of UINT_MAX.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reported-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Tested-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Reviewed-by: Christian Loehle <christian.loehle@arm.com>
Tested-by: Christian Loehle <christian.loehle@arm.com>
Tested-by: Aboorva Devarajan <aboorvad@linux.ibm.com>
Link: https://patch.msgid.link/7770672.EvYhyI6sBW@rjwysocki.net
Currently, get_typical_interval() attempts to eliminate outliers at the
high end of the sample set only (probably in order to bias the prediction
toward lower values), but this it problematic because if the outliers are
present at the low end of the sample set, discarding the highest values
will not help to reduce the variance.
Since the presence of outliers at the low end of the sample set is
generally as likely as their presence at the high end of the sample
set, modify get_typical_interval() to treat samples at the largest
distances from the average (on both ends of the sample set) as outliers.
This should increase the likelihood of making a meaningful prediction
in some cases.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reported-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Tested-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Reviewed-by: Christian Loehle <christian.loehle@arm.com>
Tested-by: Christian Loehle <christian.loehle@arm.com>
Tested-by: Aboorva Devarajan <aboorvad@linux.ibm.com>
Link: https://patch.msgid.link/2301940.iZASKD2KPV@rjwysocki.net
To prepare get_typical_interval() for subsequent changes, rearrange
the use of the data point threshold in it a bit and initialize that
threshold to UINT_MAX which is more consistent with its data type.
No intentional functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Tested-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Reviewed-by: Christian Loehle <christian.loehle@arm.com>
Tested-by: Christian Loehle <christian.loehle@arm.com>
Tested-by: Aboorva Devarajan <aboorvad@linux.ibm.com>
Link: https://patch.msgid.link/8490144.T7Z3S40VBb@rjwysocki.net
Use the observation that one loop is sufficient to compute the average
of an array of values and their variance to eliminate one of the loops
from get_typical_interval().
While at it, make get_typical_interval() consistently use u64 as the
64-bit unsigned integer data type and rearrange some white space and the
declarations of local variables in it (to make them follow the reverse
X-mas tree pattern).
No intentional functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Tested-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Reviewed-by: Christian Loehle <christian.loehle@arm.com>
Tested-by: Christian Loehle <christian.loehle@arm.com>
Tested-by: Aboorva Devarajan <aboorvad@linux.ibm.com>
Link: https://patch.msgid.link/3339073.aeNJFYEL58@rjwysocki.net
Local variable min in get_typical_interval() is updated, but never
accessed later, so drop it.
No functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Christian Loehle <christian.loehle@arm.com>
Tested-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Tested-by: Christian Loehle <christian.loehle@arm.com>
Tested-by: Aboorva Devarajan <aboorvad@linux.ibm.com>
Link: https://patch.msgid.link/13699686.uLZWGnKmhe@rjwysocki.net
size_t needs a %z format string modifier instead of %l
samples/vfs/test-list-all-mounts.c:152:39: warning: format specifies type 'unsigned long' but the argument has type 'size_t' (aka 'unsigned int') [-Wformat]
152 | printf("mnt_uidmap[%lu]:\t%s\n", idx, idmap);
| ~~~ ^~~
| %zu
samples/vfs/test-list-all-mounts.c:161:39: warning: format specifies type 'unsigned long' but the argument has type 'size_t' (aka 'unsigned int') [-Wformat]
161 | printf("mnt_gidmap[%lu]:\t%s\n", idx, idmap);
| ~~~ ^~~
| %zu
Fixes: fa204a65f1 ("samples/vfs: add STATMOUNT_MNT_{G,U}IDMAP")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20250224141406.1400864-1-arnd@kernel.org
Signed-off-by: Christian Brauner <brauner@kernel.org>
Combine 'else' and 'if' conditional statements onto a single line and drop
unrequired braces, as is standard coding style.
The code had been like this since commit c3b0e880bb ("iomap: support
REQ_OP_ZONE_APPEND").
Signed-off-by: John Garry <john.g.garry@oracle.com>
Link: https://lore.kernel.org/r/20250224154538.548028-1-john.g.garry@oracle.com
Reviewed-by: "Darrick J. Wong" <djwong@kernel.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
The visl driver supports both frame and slice mode, with and without a
start-code. But, the range and default for these enum controls was not
set, which currently limits the decoder to enums with a value of 0. Fix
this by setting the decoder mode and start code controls for both the
H.264 and HEVC codecs.
Fixes: 0c078e310b ("media: visl: add virtual stateless decoder driver")
Cc: stable@vger.kernel.org
Signed-off-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Sebastian Fricke <sebastian.fricke@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
This is merge of shared branch between RDMA and net-next trees.
* mlx5-next: (550 commits)
net/mlx5: Change POOL_NEXT_SIZE define value and make it global
net/mlx5: Add new health syndrome error and crr bit offset
Linux 6.14-rc3
...
Signed-off-by: Leon Romanovsky <leon@kernel.org>
The display related IPs in MT8188 are flexible and support being
interconnected with different instances of DDP IPs and/or with
different DDP IPs, forming a full Display Data Path that ends
with an actual display output, which is board specific.
Add a common graph in the main mt8188.dtsi devicetree, which is
shared between all of the currently supported boards.
All boards featuring any display functionality will extend this
common graph to hook the display controller of the SoC to their
specific output port(s).
Tested-by: Chen-Yu Tsai <wenst@chromium.org> # On MT8188 Ciri (int. and ext.)
Link: https://lore.kernel.org/r/20250220110948.45596-2-angelogioacchino.delregno@collabora.com
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
This board features multiple USB connectors:
* One Type-C connector with Power Delivery and Alt. Modes;
* One MicroUSB connector, also used for bootloader SW download;
* One USB through the RaspberryPi-compatible pins header.
Add configuration for the MTU3 controllers providing OTG support
with role switching both on the MicroUSB port, RPi pins header,
and the Type-C port found on this board.
Moreover, add the Richtek RT1715 Type-C Power Delivery Controller
which manages current source/sink, linked to the iTE IT5205 Type-C
Alternate Mode Passive Mux, handling both mode switching between
USB (up to 3.1 Gen2 10Gbps) and DisplayPort (four lanes, DP1.4,
op to 8.1Gbps) and plug orientation switching.
All USB ports reside on different controller instances, and all of
them support host or gadget and can be configured as desired at
runtime.
Link: https://lore.kernel.org/r/20250220105514.43107-4-angelogioacchino.delregno@collabora.com
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
The MT8188 SoC has three USB controllers, and all of them are behind
the MTU3 DRD controller.
Add the missing MTU3 nodes, default disabled, for all USB controllers
and move the related XHCI nodes to be children of their MTU3 DRD to
correctly describe the SoC.
In order to retain USB functionality on all of the MT8188 and MT8390
boards, also move the vusb33 supply and enable the relevant MTU3 nodes
with special attention to the MT8188 Geralt Chromebooks, where it was
necessary to set the dr_mode of all MTU3 controllers to host to avoid
interfering with the EC performing DRD on its own.
Tested-by: Chen-Yu Tsai <wenst@chromium.org> # on MT8188 Ciri
Link: https://lore.kernel.org/r/20250220105514.43107-3-angelogioacchino.delregno@collabora.com
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Add a port used to connect the SuperSpeed output endpoint to a
Type-C connector.
Note that the MediaTek XHCI controllers are always in front of a
different controller handling the USB HS (usually, MTU3), so the
only port that this controller provides is SuperSpeed, while the
HighSpeed one comes from elsewhere.
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20250220105514.43107-2-angelogioacchino.delregno@collabora.com
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Enable USB Type-C support on MediaTek MT8395 Genio 1200 EVK by adding
configuration for TCPC Port, USB-C connector, MUX IT5205 and related
settings.
Configure dual role switch capability, set up PD (Power Delivery) profiles,
and establish endpoints for SS (SuperSpeed) and HS (HighSpeed) USB.
Update pinctrl configurations for U3 P0 VBus default pins and set dr_mode
to "otg" for OTG (On-The-Go) mode operation.
Add ITE IT5205 (TYPEC MUX) under I2C2 bus and configure its properties;
also add references and configurations to 'typec-mux' node.
Signed-off-by: Fabien Parent <fparent@baylibre.com>
Signed-off-by: Yow-Shin Liou <yow-shin.liou@mediatek.com>
Signed-off-by: Simon Sun <simon.sun@yunjingtech.com>
Signed-off-by: Macpaul Lin <macpaul.lin@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Alexandre Mergnat <amergnat@baylibre.com>
Link: https://lore.kernel.org/r/20250224114934.3583191-1-macpaul.lin@mediatek.com
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Define the ports property in the mediatek,mtu3 device tree binding schema.
Include definitions for port@0 and port@1, specifying their roles as
High Speed (HS) and Super Speed (SS) data buses, respectively.
Suggested-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Macpaul Lin <macpaul.lin@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
Reviewed-by: Alexandre Mergnat <amergnat@baylibre.com>
Link: https://lore.kernel.org/r/20250220142230.2530583-1-macpaul.lin@mediatek.com
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
usb_p2_vbus regulator has the same regulator-name property value as
sdio_fixed_3v3, so change it to avoid this.
Fixes: a4fd1943bf ("arm64: dts: mediatek: mt8390-genio-700-evk: update regulator names")
Signed-off-by: Louis-Alexis Eyraud <louisalexis.eyraud@collabora.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20250221-fix-mtk8390-genio-common-dup-regulator-name-v1-1-92f7b9f7a414@collabora.com
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
After commit 2be404486c ("HID: i2c-hid-of: Add reset GPIO support to
i2c-hid-of"), the i2c-hid-of driver used by some mt8183 devices resets
the touchscreen without having enough post-reset delay. This makes those
touchscreen fail to get probed.
Switch to Elan touchscreen driver, which has enough post-reset delay.
Fixes: 2be404486c ("HID: i2c-hid-of: Add reset GPIO support to i2c-hid-of")
Signed-off-by: Hsin-Te Yuan <yuanhsinte@chromium.org>
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Leon Romanovsky says:
====================
This series refactors the xdo_dev_offload_ok() to be global place for
drivers to check if their offload can perform encryption for xmit
packets.
Such common place gives us an option to check MTU and PMTU at one place.
====================
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
When we obtain a reference to of a platform_device, we need to release
it via put_device.
Found by cocci:
./platform/nuvoton/npcm-video.c:1677:3-9: ERROR: missing put_device; call of_find_device_by_node on line 1667, but without a corresponding object release within this function.
./platform/nuvoton/npcm-video.c:1684:3-9: ERROR: missing put_device; call of_find_device_by_node on line 1667, but without a corresponding object release within this function.
./platform/nuvoton/npcm-video.c:1690:3-9: ERROR: missing put_device; call of_find_device_by_node on line 1667, but without a corresponding object release within this function.
./platform/nuvoton/npcm-video.c:1694:1-7: ERROR: missing put_device; call of_find_device_by_node on line 1667, but without a corresponding object release within this function.
Instead of manually calling put_device, use the __free macros.
Cc: stable@vger.kernel.org
Fixes: 46c15a4ff1 ("media: nuvoton: Add driver for NPCM video capture and encoding engine")
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Make sure all the code paths call of_node_put().
Instead of manually calling of_node_put, use the __free macros/helpers.
Cc: stable@vger.kernel.org
Fixes: 46c15a4ff1 ("media: nuvoton: Add driver for NPCM video capture and encoding engine")
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
The register that enables selecting a test-pattern to be outputted in
free-run mode (FREE_RUN_PAT_SEL[2:0]) is only available on adv7280 based
devices, not the adv7180 based ones.
Add a flag to mark devices that are capable of generating test-patterns,
and those that are not. And only register the control on supported
devices.
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
The reason why this passed unnoticed is that most infotainment systems
use frequencies near enough the middle (50MHz) where both sets work.
Fixes: 0ab13674a9 ("media: pci: mgb4: Added Digiteq Automotive MGB4 driver")
Cc: stable@vger.kernel.org
Signed-off-by: Martin Tůma <martin.tuma@digiteqautomotive.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
The CMT "magic values" registers must be updated while the CMT reset
registers are active.
Fixes: 0ab13674a9 ("media: pci: mgb4: Added Digiteq Automotive MGB4 driver")
Cc: stable@vger.kernel.org
Signed-off-by: Martin Tůma <martin.tuma@digiteqautomotive.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>