* Split devres APIs to a separate header (linux/device/devres.h)
* Move IOMEM_ERR_PTR() to err.h to avoid unneeded loops
* Introduce devm_kmemdup_array()
* Use devm_kmemdup_array() in input, IIO, and pinctrl subsystems
The following is an automated git shortlog grouped by driver:
baytrail:
- copy communities using devm_kmemdup_array()
cherryview:
- use devm_kmemdup_array()
devres:
- Introduce devm_kmemdup_array()
driver core:
- Split devres APIs to device/devres.h
err.h:
- move IOMEM_ERR_PTR() to err.h
iio:
- adc: xilinx-xadc-core: use devm_kmemdup_array()
- imu: st_lsm9ds0: Replace device.h with what is needed
input:
- ipaq-micro-keys: use devm_kmemdup_array()
- sparse-keymap: use devm_kmemdup_array()
intel:
- copy communities using devm_kmemdup_array()
Merge patch series "Split devres APIs to device/devres.h and introduce devm_kmemdup_array()":
- Merge patch series "Split devres APIs to device/devres.h and introduce devm_kmemdup_array()"
pxa2xx:
- use devm_kmemdup_array()
tangier:
- use devm_kmemdup_array()
-----BEGIN PGP SIGNATURE-----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=j1xo
-----END PGP SIGNATURE-----
Merge tag 'ib-devres-iio-input-pinctrl-v6.15' into psy-next
Merge immutable branch introducing devm_kmemdup_array(), so that
it can be used in the sc27xx fuel gauge.
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
There are conditions, albeit somewhat unlikely, under which right hand
expressions, calculating the end of time period in functions like
repaper_frame_fixed_repeat(), may overflow.
For instance, if 'factor10x' in repaper_get_temperature() is high
enough (170), as is 'epd->stage_time' in repaper_probe(), then the
resulting value of 'end' will not fit in unsigned int expression.
Mitigate this by casting 'epd->factored_stage_time' to wider type before
any multiplication is done.
Found by Linux Verification Center (linuxtesting.org) with static
analysis tool SVACE.
Fixes: 3589211e9b ("drm/tinydrm: Add RePaper e-ink driver")
Cc: stable@vger.kernel.org
Signed-off-by: Nikita Zhandarovich <n.zhandarovich@fintech.ru>
Signed-off-by: Alex Lanzano <lanzano.alex@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250116134801.22067-1-n.zhandarovich@fintech.ru
* A fix for cacheinfo DT probing to avoid reading non-boolean properties
as booleans.
* A fix for cpufeature to use bitmap_equal() instead of memcmp(), so
unused bits are ignored.
* Fixes for cmpxchg and futex cmpxchg that properly encode the sign
extension requirements on inline asm, which results in spurious
successes. This manifests in at least inode_set_ctime_current, but is
likely just a disaster waiting to happen.
* A fix for the rseq selftests, which was using an invalid constraint.
* A pair of fixes for signal frame size handling:
* We were reserving space for an extra empty extension context
header on systems with extended signal context, thus resulting in
unnecessarily large allocations.
* We weren't properly checking for available extensions before
calculating the signal stack size, which resulted in undersized
stack allocations on some systems (at least those with T-Head
custom vectors).
Also, we've added Alex as a reviewer. He's been helping out a ton
lately, thanks!
-----BEGIN PGP SIGNATURE-----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=+DfW
-----END PGP SIGNATURE-----
Merge tag 'riscv-for-linus-6.14-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull RISC-V fixes from Palmer Dabbelt:
- A fix for cacheinfo DT probing to avoid reading non-boolean
properties as booleans.
- A fix for cpufeature to use bitmap_equal() instead of memcmp(), so
unused bits are ignored.
- Fixes for cmpxchg and futex cmpxchg that properly encode the sign
extension requirements on inline asm, which results in spurious
successes. This manifests in at least inode_set_ctime_current, but is
likely just a disaster waiting to happen.
- A fix for the rseq selftests, which was using an invalid constraint.
- A pair of fixes for signal frame size handling:
- We were reserving space for an extra empty extension context
header on systems with extended signal context, thus resulting in
unnecessarily large allocations.
- We weren't properly checking for available extensions before
calculating the signal stack size, which resulted in undersized
stack allocations on some systems (at least those with T-Head
custom vectors).
Also, we've added Alex as a reviewer. He's been helping out a ton
lately, thanks!
* tag 'riscv-for-linus-6.14-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
MAINTAINERS: Add myself as a riscv reviewer
riscv: signal: fix signal_minsigstksz
riscv: signal: fix signal frame size
rseq/selftests: Fix riscv rseq_offset_deref_addv inline asm
riscv/futex: sign extend compare value in atomic cmpxchg
riscv/atomic: Do proper sign extension also for unsigned in arch_cmpxchg
riscv: cpufeature: use bitmap_equal() instead of memcmp()
riscv: cacheinfo: Use of_property_present() for non-boolean properties
There are SoM variants with no SPI NOR flash populated. Add overlay to be
able to support this.
Signed-off-by: Teresa Remmet <t.remmet@phytec.de>
Signed-off-by: Andrej Picej <andrej.picej@norik.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
There are SoM variants with no eth phy populated. Add overlay to be
able to support this.
Signed-off-by: Teresa Remmet <t.remmet@phytec.de>
Signed-off-by: Andrej Picej <andrej.picej@norik.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Adds a devicetree overlay containing reserved memory regions used
for intercore communication between A53 and M4 cores.
Signed-off-by: Dominik Haller <d.haller@phytec.de>
Signed-off-by: Andrej Picej <andrej.picej@norik.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Add support for the PEB-EVAL-01 expansion board for
phyBOARD-Polis-i.MX8MM.
Signed-off-by: Janine Hagemann <j.hagemann@phytec.de>
Signed-off-by: Andrej Picej <andrej.picej@norik.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
PEB-AV-10 is an Audio/Video extension module which extends
phyBOARD-Polis i.MX8MM.
With MIPI DSI to LVDS bridge already populated on SoM the PEB-AV-10 adds
support for:
- connecting 10" display,
- audio with TLV320AIC and
- EEPROM.
Signed-off-by: Teresa Remmet <t.remmet@phytec.de>
Signed-off-by: Andrej Picej <andrej.picej@norik.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Assign the missing regulator to the bluetooth node. Absence of
this regulator triggers the warning message from kernel as driver
uses a fallback dummy regulator when there is no regulator assigned.
Signed-off-by: Yashwanth Varakala <y.varakala@phytec.de>
Signed-off-by: Andrej Picej <andrej.picej@norik.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Move properties from SoM's dtsi to carrierboard's dts as they are
actually defined by the carrier board design.
Signed-off-by: Yannic Moog <y.moog@phytec.de>
Signed-off-by: Andrej Picej <andrej.picej@norik.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
RV-3028 RTC can be used to wakeup the system on phyGATE-Tauri-L-i.MX8MM,
mark the device as wakeup source.
Signed-off-by: Andrej Picej <andrej.picej@norik.com>
Reviewed-by: Teresa Remmet <t.remmet@phytec.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
RV-3028 RTC can be used to wakeup the system on phyBOARD-Polis-i.MX8MM,
mark the device as wakeup source.
Signed-off-by: Andrej Picej <andrej.picej@norik.com>
Reviewed-by: Teresa Remmet <t.remmet@phytec.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Add missing EEPROM and RTC descriptions. Also use eMMC with
lower-case "e".
Signed-off-by: Yannic Moog <y.moog@phytec.de>
Signed-off-by: Andrej Picej <andrej.picej@norik.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Add a missing voltage regulator of 1.8v to the sn65dsi83
(dsi_lvds bridge) node. Due to the absence of this regulator, a fallback
dummy regulator is used and that triggers a warning message from the
kernel. Assigning the appropriate regulator avoids the warning.
Signed-off-by: Yashwanth Varakala <y.varakala@phytec.de>
Signed-off-by: Andrej Picej <andrej.picej@norik.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Remove device tree property "fsl,magic-packet" as WoL is not working
on the SoM and so not required. This also saves a significant amount of
power during suspend as the ethernet phy is not powered down otherwise.
Signed-off-by: Teresa Remmet <t.remmet@phytec.de>
Signed-off-by: Andrej Picej <andrej.picej@norik.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Not using pull-up on the host wake-up line triggers the wake up
immediately after device enters suspend. Fix this by enabling internal
pull-up and setting interrupt triggering on the falling edge.
Signed-off-by: Andrej Picej <andrej.picej@norik.com>
Reviewed-by: Teresa Remmet <t.remmet@phytec.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
LDO3 is also used as switch for enabling VDD_3V3_S and need to
be kept on during suspend. Disabling this can lead to an unwanted
reset during resume.
Set LDO3 to 2,5V as the voltage should be fix.
Signed-off-by: Teresa Remmet <t.remmet@phytec.de>
Signed-off-by: Andrej Picej <andrej.picej@norik.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Remove LVDS panel and backlight nodes from the Verdin iMX8M Mini SoM
dtsi file, those two hardware components are not part of the SoM,
therefore they should not be present in this file.
This is solving a dtb checker warning about panel-lvds compatible.
Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Add missing gpio-line-names for SODIMM_79 and SODIMM_97
Signed-off-by: Rafael Beims <rafael.beims@toradex.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Add the two eDMA nodes in the device tree in order to enable the probing
of the S32G2/S32G3 eDMA driver.
Signed-off-by: Larisa Grigore <larisa.grigore@oss.nxp.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Reviewed-by: Matthias Brugger <mbrugger@suse.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Add PCIe's msi-map and iommu-map property because i.MX95 support smmu and
its.
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Add PCIe EP overlay file for i.MX8QXP mek board to let PCI work as endpoint
mode.
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
(Q)SPI NOR flash is supplied by 1.8V. Add the corresponding supply.
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
(Q)SPI NOR flash is supplied by 1.8V. Add the corresponding supply.
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
(Q)SPI NOR flash is supplied by 1.8V. Add the corresponding supply.
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
(Q)SPI NOR flash is supplied by 1.8V. Add the corresponding supply.
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Currently, HDMI audio cannot play sound at a 44.1 kHz sample rate due to
a clock frequency mismatch. This update resolves the issue by allowing
the sai driver to change the clock parent to AUDIO_PLL_1 when the sample
rate is 44.1 kHz. It also ensures that AUDIO_PLL_1 operates at the
correct frequency for this configuration.
Signed-off-by: Stefan Eichenberger <stefan.eichenberger@toradex.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Add INA231 current sensor for S32G399A-RDB3 boards.
Signed-off-by: Ciprian Marian Costea <ciprianmarian.costea@oss.nxp.com>
Reviewed-by: Matthias Brugger <mbrugger@suse.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Create common part, s32gxxa-evb.dtsi and s32gxxa-rdb.dtsi, for S32G2/S32G3
RDB2\3 and EVB G2/G3 boards to avoid copy duplicate part in boards dts
file. Prepare to add other modules such as FlexCAN, DSPI easily in the
future.
Signed-off-by: Ciprian Marian Costea <ciprianmarian.costea@oss.nxp.com>
Reviewed-by: Matthias Brugger <mbrugger@suse.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Add I2C[0..2] for S32G2 and S32G3 SoCs.
Signed-off-by: Ciprian Marian Costea <ciprianmarian.costea@oss.nxp.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Reviewed-by: Matthias Brugger <mbrugger@suse.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
WM8960 has the following power supplies:
- AVDD
- DBVDD
- DCVDD
- SPKVDD1
- SPKVDD2
Add new audio regulators to reflect the schematic and complete missed
power supplies.
Signed-off-by: Chancel Liu <chancel.liu@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
WM8960 has the following power supplies:
- AVDD
- DBVDD
- DCVDD
- SPKVDD1
- SPKVDD2
Add new audio regulators to reflect the schematic and complete missed
power supplies.
Signed-off-by: Chancel Liu <chancel.liu@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
WM8960 has the following power supplies:
- AVDD
- DBVDD
- DCVDD
- SPKVDD1
- SPKVDD2
Add new audio regulators to reflect the schematic and complete missed
power supplies.
Signed-off-by: Chancel Liu <chancel.liu@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
WM8960 has the following power supplies:
- AVDD
- DBVDD
- DCVDD
- SPKVDD1
- SPKVDD2
Add new audio regulators to reflect the schematic and complete missed
power supplies.
Signed-off-by: Chancel Liu <chancel.liu@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
In mainboard schematics ENET1 is eqos and ENET2 is fec.
This is reversed to standard aliases using base addresses for ordering.
Adjust aliases for all mainboards accordingly.
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Change the output to inactive (output-low) for active-low pins, resulting
in high-voltage of power-down pins. Thus this enables the attached
devices.
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Add PCIe support for TQMa8Xx on MBa8Xx board.
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
(Q)SPI NOR flash is supplied by 1.8V. Add the corresponding supply.
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
According to ti,tlv320dac3100.yaml, 'clocks' is not a valid property.
Remove it to fix the following dt-schema warning:
Unevaluated properties are not allowed ('clocks' was unexpected)
Signed-off-by: Fabio Estevam <festevam@denx.de>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The NXP PCF85063TP RTC is capable of 400 kHz of SCL clock frequency,
so use that instead of the current 100 kHz.
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Use rgmii-rxid instead of rgmii-txid. It should have no effect here,
because we have a fixed-link, but rxid reflects the board design.
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The main 24V regulator will toggle GPIO4_IO23 to signal imminent voltage
loss. Reflect this in the DT, so the OS can take appropriate action when
this happens.
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
uart1 TX, RX and RTS signals go off the base board and to a RS485
transceiver. Describe this in the device tree.
Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>