[ Upstream commit c5ff6b8371 ]
According to Sections 3.1.2 and 3.1.3 of AccECN spec (RFC9768).
In Section 3.1.2, it says an AccECN implementation has no need to
recognize or support the Server response labelled 'Nonce' or ECN-nonce
feedback more generally, as RFC 3540 has been reclassified as Historic.
AccECN is compatible with alternative ECN feedback integrity approaches
to the nonce. The SYN/ACK labelled 'Nonce' with (AE,CWR,ECE) = (1,0,1)
is reserved for future use. A TCP Client (A) that receives such a SYN/ACK
follows the procedure for forward compatibility given in Section 3.1.3.
Then in Section 3.1.3, it says if a TCP Client has sent a SYN requesting
AccECN feedback with (AE,CWR,ECE) = (1,1,1) then receives a SYN/ACK with
the currently reserved combination (AE,CWR,ECE) = (1,0,1) but it does not
have logic specific to such a combination, the Client MUST enable AccECN
mode as if the SYN/ACK onfirmed that the Server supported AccECN and as
if it fed back that the IP-ECN field on the SYN had arrived unchanged.
Fixes: 3cae34274c ("tcp: accecn: AccECN negotiation").
Signed-off-by: Chia-Yu Chang <chia-yu.chang@nokia-bell-labs.com>
Acked-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20260131222515.8485-7-chia-yu.chang@nokia-bell-labs.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e68c28f22f ]
When AccECN is not successfully negociated for a TCP flow, it defaults
fallback to classic ECN (RFC3168). However, L4S service will fallback
to non-ECN.
This patch enables congestion control module to control whether it
should not fallback to classic ECN after unsuccessful AccECN negotiation.
A new CA module flag (TCP_CONG_NO_FALLBACK_RFC3168) identifies this
behavior expected by the CA.
Signed-off-by: Chia-Yu Chang <chia-yu.chang@nokia-bell-labs.com>
Acked-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20260131222515.8485-6-chia-yu.chang@nokia-bell-labs.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Stable-dep-of: c5ff6b8371 ("tcp: accecn: handle unexpected AccECN negotiation feedback")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 100f946b8d ]
Two flags for congestion control (CC) module are added in this patch
related to AccECN negotiation. First, a new flag (TCP_CONG_NEEDS_ACCECN)
defines that the CC expects to negotiate AccECN functionality using the
ECE, CWR and AE flags in the TCP header.
Second, during ECN negotiation, ECT(0) in the IP header is used. This
patch enables CC to control whether ECT(0) or ECT(1) should be used on
a per-segment basis. A new flag (TCP_CONG_ECT_1_NEGOTIATION) defines the
expected ECT value in the IP header by the CA when not-yet initialized
for the connection.
The detailed AccECN negotiaotn can be found in IETF RFC9768.
Co-developed-by: Olivier Tilmans <olivier.tilmans@nokia.com>
Signed-off-by: Olivier Tilmans <olivier.tilmans@nokia.com>
Signed-off-by: Ilpo Järvinen <ij@kernel.org>
Signed-off-by: Chia-Yu Chang <chia-yu.chang@nokia-bell-labs.com>
Acked-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20260131222515.8485-5-chia-yu.chang@nokia-bell-labs.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Stable-dep-of: c5ff6b8371 ("tcp: accecn: handle unexpected AccECN negotiation feedback")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7833570dae ]
A recent change for the range check started triggering a clang warning:
fs/jfs/jfs_dtree.c:2906:31: error: result of comparison of constant 128 with expression of type 's8' (aka 'signed char') is always false [-Werror,-Wtautological-constant-out-of-range-compare]
2906 | if (stbl[i] < 0 || stbl[i] >= DTPAGEMAXSLOT) {
| ~~~~~~~ ^ ~~~~~~~~~~~~~
fs/jfs/jfs_dtree.c:3111:30: error: result of comparison of constant 128 with expression of type 's8' (aka 'signed char') is always false [-Werror,-Wtautological-constant-out-of-range-compare]
3111 | if (stbl[0] < 0 || stbl[0] >= DTPAGEMAXSLOT) {
| ~~~~~~~ ^ ~~~~~~~~~~~~~
Both the old and the new check were useless, but the previous version
apparently did not lead to the warning.
Remove the extraneous range check for simplicity.
Fixes: cafc667982 ("jfs: replace hardcoded magic number with DTPAGEMAXSLOT constant")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Dave Kleikamp <dave.kleikamp@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0895a000e4 ]
The user.* sysctls implement the ctl_table_root::permissions hook and they
override the file access mode based on the CAP_SYS_RESOURCE capability (at
most rwx if capable, at most r-- if not). The capability is being checked
unconditionally, so if an LSM denies the capability, an audit record may
be logged even when access is in fact granted.
Given the logic in the set_permissions() function in kernel/ucount.c and
the unfortunate way the permission checking is implemented, it doesn't
seem viable to avoid false positive denials by deferring the capability
check. Thus, do the same as in net_ctl_permissions() (net/sysctl_net.c) -
switch from ns_capable() to ns_capable_noaudit(), so that the check never
logs an audit record.
Link: https://lkml.kernel.org/r/20260122140745.239428-1-omosnace@redhat.com
Fixes: dbec28460a ("userns: Add per user namespace sysctls.")
Signed-off-by: Ondrej Mosnacek <omosnace@redhat.com>
Reviewed-by: Paul Moore <paul@paul-moore.com>
Acked-by: Serge Hallyn <serge@hallyn.com>
Cc: Eric Biederman <ebiederm@xmission.com>
Cc: Alexey Gladkov <legion@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0715881360 ]
The IPC sysctls implement the ctl_table_root::permissions hook and
they override the file access mode based on the CAP_CHECKPOINT_RESTORE
capability, which is being checked regardless of whether any access is
actually denied or not, so if an LSM denies the capability, an audit
record may be logged even when access is in fact granted.
It wouldn't be viable to restructure the sysctl permission logic to only
check the capability when the access would be actually denied if it's
not granted. Thus, do the same as in net_ctl_permissions()
(net/sysctl_net.c) - switch from ns_capable() to ns_capable_noaudit(),
so that the check never emits an audit record.
Fixes: 0889f44e28 ("ipc: Check permissions for checkpoint_restart sysctls at open time")
Signed-off-by: Ondrej Mosnacek <omosnace@redhat.com>
Acked-by: Alexey Gladkov <legion@kernel.org>
Acked-by: Serge Hallyn <serge@hallyn.com>
Signed-off-by: Serge Hallyn <sergeh@kernel.org>
Stable-dep-of: 8924336531 ("ipc: don't audit capability check in ipc_permissions()")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit bce1dabd31 ]
Commit 5bbc2b785e ("selftests/mm: fix FORCE_READ to read input value
correctly") modified FORCE_READ() to take a value instead of a pointer.
It also changed most of the call sites accordingly, but missed many of
them in cow.c. In those cases, we ended up with the pointer itself being
read, not the memory it points to.
No failure occurred as a result, so it looks like the tests work just fine
without faulting in. However, the huge_zeropage tests explicitly check
that pages are populated, so those became skipped.
Convert all the remaining FORCE_READ() to fault in the mapped page, as was
originally intended. This allows the huge_zeropage tests to run again (3
tests in total).
Link: https://lkml.kernel.org/r/20260122170224.4056513-5-kevin.brodsky@arm.com
Fixes: 5bbc2b785e ("selftests/mm: fix FORCE_READ to read input value correctly")
Signed-off-by: Kevin Brodsky <kevin.brodsky@arm.com>
Acked-by: SeongJae Park <sj@kernel.org>
Reviewed-by: wang lian <lianux.mm@gmail.com>
Acked-by: David Hildenbrand (Red Hat) <david@kernel.org>
Reviewed-by: Dev Jain <dev.jain@arm.com>
Cc: Jason Gunthorpe <jgg@nvidia.com>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Mark Brown <broonie@kernel.org>
Cc: Paolo Abeni <pabeni@redhat.com>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Usama Anjum <Usama.Anjum@arm.com>
Cc: Yunsheng Lin <linyunsheng@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9abf79c8d7 ]
Previously program_hpx_type2() applied PCIe settings unconditionally,
which could incorrectly change bits like Extended Tag Field Enable and
Enable Relaxed Ordering.
When _HPX was added to ACPI r3.0, the intent of the PCIe Setting
Record (Type 2) in sec 6.2.7.3 was to configure AER registers when the
OS does not own the AER Capability:
The PCI Express setting record contains ... [the AER] Uncorrectable
Error Mask, Uncorrectable Error Severity, Correctable Error Mask
... to be used when configuring registers in the Advanced Error
Reporting Extended Capability Structure ...
OSPM [1] will only evaluate _HPX with Setting Record – Type 2 if
OSPM is not controlling the PCI Express Advanced Error Reporting
capability.
ACPI r3.0b, sec 6.2.7.3, added more AER registers, including registers
in the PCIe Capability with AER-related bits, and the restriction that
the OS use this only when it owns PCIe native hotplug:
... when configuring PCI Express registers in the Advanced Error
Reporting Extended Capability Structure *or PCI Express Capability
Structure* ...
An OS that has assumed ownership of native hot plug but does not
... have ownership of the AER register set must use ... the Type 2
record to program the AER registers ...
However, since the Type 2 record also includes register bits that
have functions other than AER, the OS must ignore values ... that
are not applicable.
Restrict program_hpx_type2() to only the intended purpose:
- Apply settings only when OS owns PCIe native hotplug but not AER,
- Only touch the AER-related bits (Error Reporting Enables) in Device
Control
- Don't touch Link Control at all, since nothing there seems AER-related,
but log _HPX settings for debugging purposes
Note that Read Completion Boundary is now configured elsewhere, since it is
unrelated to _HPX.
[1] Operating System-directed configuration and Power Management
Fixes: 40abb96c51 ("[PATCH] pciehp: Fix programming hotplug parameters")
Signed-off-by: Håkon Bugge <haakon.bugge@oracle.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Link: https://patch.msgid.link/20260129175237.727059-3-haakon.bugge@oracle.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1a6845aaa6 ]
Commit e42010d820 ("PCI: Set Read Completion Boundary to 128 iff Root
Port supports it (_HPX)") worked around a bogus _HPX type 2 record, which
caused program_hpx_type2() to set the RCB in an endpoint even though the
Root Port did not have the RCB bit set.
e42010d820 fixed that by setting the RCB in the endpoint only when it was
set in the Root Port.
In retrospect, program_hpx_type2() is intended for AER-related settings,
and the RCB should be configured elsewhere so it doesn't depend on the
presence or contents of an _HPX record.
Explicitly program the RCB from pci_configure_device() so it matches the
Root Port's RCB. The Root Port may not be visible to virtualized guests;
in that case, leave RCB alone.
Fixes: e42010d820 ("PCI: Set Read Completion Boundary to 128 iff Root Port supports it (_HPX)")
Signed-off-by: Håkon Bugge <haakon.bugge@oracle.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Link: https://patch.msgid.link/20260129175237.727059-2-haakon.bugge@oracle.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2c1ba9c2ad ]
When an arvif is initialized in non-AP STA mode but MLO connection
preparation fails before the arvif is created
(arvif->is_created remains false), the error path attempts to delete all
links. However, link deletion only executes when arvif->is_created is true.
As a result, ahvif retains a stale entry of arvif that is initialized but
not created.
When a new arvif is initialized with the same link id, this stale mapping
triggers the following WARN_ON.
WARNING: drivers/net/wireless/ath/ath12k/mac.c:4271 at ath12k_mac_op_change_vif_links+0x140/0x180 [ath12k], CPU#3: wpa_supplicant/275
Call trace:
ath12k_mac_op_change_vif_links+0x140/0x180 [ath12k] (P)
drv_change_vif_links+0xbc/0x1a4 [mac80211]
ieee80211_vif_update_links+0x54c/0x6a0 [mac80211]
ieee80211_vif_set_links+0x40/0x70 [mac80211]
ieee80211_prep_connection+0x84/0x450 [mac80211]
ieee80211_mgd_auth+0x200/0x480 [mac80211]
ieee80211_auth+0x14/0x20 [mac80211]
cfg80211_mlme_auth+0x90/0xf0 [cfg80211]
nl80211_authenticate+0x32c/0x380 [cfg80211]
genl_family_rcv_msg_doit+0xc8/0x134
Fix this issue by unassigning the link vif and clearing ahvif->links_map
if arvif is only initialized but not created.
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.5-01651-QCAHKSWPL_SILICONZ-1
Fixes: 81e4be3054 ("wifi: ath12k: handle link removal in change_vif_links()")
Signed-off-by: Aaradhana Sahu <aaradhana.sahu@oss.qualcomm.com>
Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com>
Reviewed-by: Baochen Qiang <baochen.qiang@oss.qualcomm.com>
Link: https://patch.msgid.link/20260127033400.1721220-1-aaradhana.sahu@oss.qualcomm.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e4763898bb ]
Currently, print_array_to_buf_index() decrements index unconditionally.
This may lead to invalid buffer access when array_len is zero.
Fix this by decrementing index only when array_len is non-zero.
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.5-01651-QCAHKSWPL_SILICONZ-1
Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.1.c5-00302-QCAHMTSWPL_V1.0_V2.0_SILICONZ-1.115823.3
Fixes: adf6df963c ("wifi: ath12k: Add support to parse requested stats_type")
Signed-off-by: Aaradhana Sahu <aaradhana.sahu@oss.qualcomm.com>
Reviewed-by: Baochen Qiang <baochen.qiang@oss.qualcomm.com>
Link: https://patch.msgid.link/20260123071253.2202644-2-aaradhana.sahu@oss.qualcomm.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c386a2b106 ]
For M.2 WLAN chips, there is no suitable DTS node to specify the
firmware-name property. In addition, assigning firmware for the
M.2 PCIe interface causes chips that do not use usecase specific
firmware to fail. Therefore, abandoning the approach of specifying
firmware in DTS. As an alternative, propose a static lookup table
mapping device compatible to firmware names. Currently, only WCN6855
HW2.1 requires this.
However, support for the firmware-name property is retained to keep
the ABI backwards compatible.
For details on usecase specific firmware, see:
https://lore.kernel.org/all/20250522013444.1301330-3-miaoqing.pan@oss.qualcomm.com/.
Tested-on: WCN6855 hw2.1 PCI WLAN.HSP.1.1-04685-QCAHSPSWPL_V1_V2_SILICONZ_IOE-1
Fixes: edbbc647c4 ("wifi: ath11k: support usercase-specific firmware overrides")
Signed-off-by: Miaoqing Pan <miaoqing.pan@oss.qualcomm.com>
Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com>
Reviewed-by: Baochen Qiang <baochen.qiang@oss.qualcomm.com>
Link: https://patch.msgid.link/20260121095055.3683957-2-miaoqing.pan@oss.qualcomm.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e55ac34808 ]
ath10k_sdio_fw_crashed_dump() calls ath10k_coredump_new() which requires
ar->dump_mutex to be held, as indicated by lockdep_assert_held() in that
function. However, the SDIO implementation does not acquire this lock,
unlike the PCI and SNOC implementations which properly hold the mutex.
Additionally, ar->stats.fw_crash_counter is documented as protected by
ar->data_lock in core.h, but the SDIO implementation modifies it without
holding this spinlock.
Add the missing mutex_lock()/mutex_unlock() around the coredump
operations, and add spin_lock_bh()/spin_unlock_bh() around the
fw_crash_counter increment, following the pattern used in
ath10k_pci_fw_dump_work() and ath10k_snoc_fw_crashed_dump().
Fixes: 3c45f21af8 ("ath10k: sdio: add firmware coredump support")
Signed-off-by: Ziyi Guo <n7l8m4@u.northwestern.edu>
Reviewed-by: Baochen Qiang <baochen.qiang@oss.qualcomm.com>
Link: https://patch.msgid.link/20260123045822.2221549-1-n7l8m4@u.northwestern.edu
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f7245901de ]
of_pci_bus_find_domain_nr() allows its parent parameter to be NULL but
of_pci_bus_release_domain_nr() (that undoes its effect) doesn't -- that
means it's going to blow up while calling of_get_pci_domain_nr() if the
parent parameter indeed happens to be NULL. Add the missing NULL check.
Found by Linux Verification Center (linuxtesting.org) with the Svace static
analysis tool.
Fixes: c14f7ccc9f ("PCI: Assign PCI domain IDs by ida_alloc()")
Signed-off-by: Sergey Shtylyov <s.shtylyov@auroraos.dev>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Link: https://patch.msgid.link/20260127203944.28588-1-s.shtylyov@auroraos.dev
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 838eb96876 ]
tcp_tx_timestamp() is only called at the end of tcp_sendmsg_locked()
before the final tcp_push().
By the time it is called, it is possible all the copied data
has been sent already (transmit queue is empty).
If this is the case, use the last skb in the rtx queue.
Fixes: 75c119afe1 ("tcp: implement rb-tree based retransmit queue")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Jason Xing <kerneljasonxing@gmail.com>
Link: https://patch.msgid.link/20260127123828.4098577-2-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f909e3ee3e ]
calculate_memsize() applies lower bound to the resource size before
aligning the resource size making it impossible to shrink bridge window
resources. I've not found any justification for this lower bound and
nothing indicated it was to work around some HW issue.
Prior to the commit 3baeae3603 ("PCI: Use pci_release_resource() instead
of release_resource()"), releasing a bridge window during BAR resize
resulted in clearing start and end address of the resource. Clearing
addresses destroys the resource size as a side-effect, therefore nullifying
the effect of the old size lower bound.
After the commit 3baeae3603 ("PCI: Use pci_release_resource() instead of
release_resource()"), BAR resize uses the aligned old size, which results
in exceeding what fits into the parent window in some cases:
xe 0030:03:00.0: [drm] Attempting to resize bar from 256MiB -> 16384MiB
xe 0030:03:00.0: BAR 0 [mem 0x620c000000000-0x620c000ffffff 64bit]: releasing
xe 0030:03:00.0: BAR 2 [mem 0x6200000000000-0x620000fffffff 64bit pref]: releasing
pci 0030:02:01.0: bridge window [mem 0x6200000000000-0x620001fffffff 64bit pref]: releasing
pci 0030:01:00.0: bridge window [mem 0x6200000000000-0x6203fbff0ffff 64bit pref]: releasing
pci 0030:00:00.0: bridge window [mem 0x6200000000000-0x6203fbff0ffff 64bit pref]: was not released (still contains assigned resources)
pci 0030:00:00.0: Assigned bridge window [mem 0x6200000000000-0x6203fbff0ffff 64bit pref] to [bus 01-04] free space at [mem 0x6200400000000-0x62007ffffffff 64bit pref]
pci 0030:00:00.0: Assigned bridge window [mem 0x6200000000000-0x6203fbff0ffff 64bit pref] to [bus 01-04] cannot fit 0x4000000000 required for 0030:01:00.0 bridging to [bus 02-04]
The old size of 0x6200000000000-0x6203fbff0ffff resource was used as the
lower bound which results in 0x4000000000 size request due to alignment.
That exceeds what can fit into the parent window.
Since the lower bound never even was enforced fully because the resource
addresses were cleared when the bridge window is released, remove the
old_size lower bound entirely and trust the calculated bridge window size
is enough.
This same problem may occur on io window side but seems less likely to
cause issues due to general difference in alignment. Removing the lower
bound may have other unforeseen consequences in case of io window so it's
better to leave it as -next material if no problem is reported related to
io window sizing (BAR resize shouldn't touch io windows anyway).
Fixes: 3baeae3603 ("PCI: Use pci_release_resource() instead of release_resource()")
Reported-by: Simon Richter <Simon.Richter@hogyros.de>
Link: https://lore.kernel.org/r/f9a8c975-f5d3-4dd2-988e-4371a1433a60@hogyros.de/
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Link: https://patch.msgid.link/20251219174036.16738-6-ilpo.jarvinen@linux.intel.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3958bf16e2 ]
New way to calculate the bridge window head alignment produces tight-fit,
that is, it does not leave any gaps between the resources. Similarly,
relaxed tail alignment does not leave extra tail room.
Start to use bridge window calculation that does not over-estimate the size
of the required window.
pbus_upstream_space_available() can be removed.
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Tested-by: Malte Schröder <malte+lkml@tnxip.de>
Link: https://patch.msgid.link/20251219174036.16738-4-ilpo.jarvinen@linux.intel.com
Stable-dep-of: f909e3ee3e ("PCI: Remove old_size limit from bridge window sizing")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit bc75c8e507 ]
The calculation of bridge window head alignment is done by
calculate_mem_align() [*]. With the default bridge window alignment, it
is used for both head and tail alignment.
The selected head alignment does not always result in tight-fitting
resources (gap at d4f00000-d4ffffff):
d4800000-dbffffff : PCI Bus 0000:06
d4800000-d48fffff : PCI Bus 0000:07
d4800000-d4803fff : 0000:07:00.0
d4800000-d4803fff : nvme
d4900000-d49fffff : PCI Bus 0000:0a
d4900000-d490ffff : 0000:0a:00.0
d4900000-d490ffff : r8169
d4910000-d4913fff : 0000:0a:00.0
d4a00000-d4cfffff : PCI Bus 0000:0b
d4a00000-d4bfffff : 0000:0b:00.0
d4a00000-d4bfffff : 0000:0b:00.0
d4c00000-d4c07fff : 0000:0b:00.0
d4d00000-d4dfffff : PCI Bus 0000:15
d4d00000-d4d07fff : 0000:15:00.0
d4d00000-d4d07fff : xhci-hcd
d4e00000-d4efffff : PCI Bus 0000:16
d4e00000-d4e7ffff : 0000:16:00.0
d4e80000-d4e803ff : 0000:16:00.0
d4e80000-d4e803ff : ahci
d5000000-dbffffff : PCI Bus 0000:0c
This has not caused problems (for years) with the default bridge window
tail alignment that grossly over-estimates the required tail alignment
leaving more tail room than necessary. With the introduction of relaxed
tail alignment that leaves no extra tail room whatsoever, any gaps will
immediately turn into assignment failures.
Introduce head alignment calculation that ensures no gaps are left and
apply the new approach when using relaxed alignment. We may want to
consider using it for the normal alignment eventually, but as the first
step, solve only the problem with the relaxed tail alignment.
([*] I don't understand the algorithm in calculate_mem_align().)
Link: https://git.kernel.org/history/history/c/5d0a8965aea9 ("[PATCH] 2.5.14: New PCI allocation code (alpha, arm, parisc) [2/2]")
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=220775
Reported-by: Malte Schröder <malte+lkml@tnxip.de>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Tested-by: Malte Schröder <malte+lkml@tnxip.de>
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/20251219174036.16738-3-ilpo.jarvinen@linux.intel.com
Stable-dep-of: f909e3ee3e ("PCI: Remove old_size limit from bridge window sizing")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8cafcb8813 ]
Corrupted FAT images can leave a directory inode with an incorrect
i_nlink (e.g. 2 even though subdirectories exist). rmdir then
unconditionally calls drop_nlink(dir) and can drive i_nlink to 0,
triggering the WARN_ON in drop_nlink().
Add a sanity check in vfat_rmdir() and msdos_rmdir(): only drop the
parent link count when it is at least 3, otherwise report a filesystem
error.
Link: https://lkml.kernel.org/r/20260101111148.1437-1-zhiyuzhang999@gmail.com
Fixes: 9a53c3a783 ("[PATCH] r/o bind mounts: unlink: monitor i_nlink")
Signed-off-by: Zhiyu Zhang <zhiyuzhang999@gmail.com>
Reported-by: Zhiyu Zhang <zhiyuzhang999@gmail.com>
Closes: https://lore.kernel.org/linux-fsdevel/aVN06OKsKxZe6-Kv@casper.infradead.org/T/#t
Tested-by: Zhiyu Zhang <zhiyuzhang999@gmail.com>
Acked-by: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Jan Kara <jack@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 105ddfb2d2 ]
The Task::group_leader() method currently allows you to access the
group_leader() of any task, for example one you hold a refcount to. But
this is not safe in general since the group leader could change when a
task exits. See for example commit a15f37a401 ("kernel/sys.c: fix the
racy usage of task_lock(tsk->group_leader) in sys_prlimit64() paths").
All existing users of Task::group_leader() call this method on current,
which is guaranteed running, so there's not an actual issue in Rust code
today. But to prevent code in the future from making this mistake,
restrict Task::group_leader() so that it can only be called on current.
There are some other cases where accessing task->group_leader is okay.
For example it can be safe if you hold tasklist_lock or rcu_read_lock().
However, only supporting current->group_leader is sufficient for all
in-tree Rust users of group_leader right now. Safe Rust functionality for
accessing it under rcu or while holding tasklist_lock may be added in the
future if required by any future Rust module.
This patch is a bugfix in that it prevents users of this API from writing
incorrect code. It doesn't change behavior of correct code.
Link: https://lkml.kernel.org/r/20260107-task-group-leader-v2-1-8fbf816f2a2f@google.com
Signed-off-by: Alice Ryhl <aliceryhl@google.com>
Fixes: 313c4281bc ("rust: add basic `Task`")
Reported-by: Oleg Nesterov <oleg@redhat.com>
Closes: https://lore.kernel.org/all/aTLnV-5jlgfk1aRK@redhat.com/
Reviewed-by: Boqun Feng <boqun.feng@gmail.com>
Reviewed-by: Gary Guo <gary@garyguo.net>
Cc: Andreas Hindborg <a.hindborg@kernel.org>
Cc: Benno Lossin <lossin@kernel.org>
Cc: "Björn Roy Baron" <bjorn3_gh@protonmail.com>
Cc: Björn Roy Baron <bjorn3_gh@protonmail.com>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Danilo Krummrich <dakr@kernel.org>
Cc: FUJITA Tomonori <fujita.tomonori@gmail.com>
Cc: Miguel Ojeda <ojeda@kernel.org>
Cc: Panagiotis Foliadis <pfoliadis@posteo.net>
Cc: Shankari Anand <shankari.ak0208@gmail.com>
Cc: Trevor Gross <tmgross@umich.edu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1921044eeb ]
Commit ae5b350085 ("kstrtox: add support for enabled and disabled in
kstrtobool()") added support for 'e'/'E' (enabled) and 'd'/'D' (disabled)
inputs, but did not update the docstring accordingly.
Update the docstring to include 'Ee' (for true) and 'Dd' (for false) in
the list of accepted first characters.
Link: https://lkml.kernel.org/r/20251227092229.57330-1-chaitanyamishra.ai@gmail.com
Fixes: ae5b350085 ("kstrtox: add support for enabled and disabled in kstrtobool()")
Signed-off-by: Chaitanya Mishra <chaitanyamishra.ai@gmail.com>
Cc: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f9c206cdc4 ]
During v4 request compound arg decoding, some ops (e.g. SETATTR)
can trigger idmap lookup upcalls. When those upcall responses get
delayed beyond the allowed time limit, cache_check() will mark the
request for deferral and cause it to be dropped.
This prevents nfs4svc_encode_compoundres from being executed, and
thus the session slot flag NFSD4_SLOT_INUSE never gets cleared.
Subsequent client requests will fail with NFSERR_JUKEBOX, given
that the slot will be marked as in-use, making the SEQUENCE op
fail.
Fix this by making sure that the RQ_USEDEFERRAL flag is always
clear during nfs4svc_decode_compoundargs(), since no v4 request
should ever be deferred.
Fixes: 2f425878b6 ("nfsd: don't use the deferral service, return NFS4ERR_DELAY")
Signed-off-by: Anthony Iliopoulos <ailiop@suse.com>
Reviewed-by: NeilBrown <neil@brown.name>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit eb1f3b55ac ]
The client-side source code template mistakenly includes the
nlm4.h header file, which is specific to the NLM protocol and
should not be present in the generic template that generates
client stubs for all XDR-based protocols.
Fixes: 903a7d37d9 ("xdrgen: Update the files included in client-side source code")
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 27b0fcae8f ]
The xdrgen decoders for strings and opaque data had an
optimization that skipped calling xdr_inline_decode() when the
item length was zero. This left the data pointer uninitialized,
which could lead to unpredictable behavior when callers access
it.
Remove the zero-length check and always call xdr_inline_decode().
When passed a length of zero, xdr_inline_decode() returns the
current buffer position, which is valid and matches the behavior
of hand-coded XDR decoders throughout the kernel.
Fixes: 4b132aacb0 ("tools: Add xdrgen")
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: NeilBrown <neil@brown.name>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0ac903d1bf ]
A documenting comment in include/uapi/linux/nfs.h claims incorrectly
that NFSv2 defines NFSERR_INVAL. There is no such definition in either
RFC 1094 or https://pubs.opengroup.org/onlinepubs/9629799/chap7.htm
NFS3ERR_INVAL is introduced in RFC 1813.
NFSD returns NFSERR_INVAL for PROC_GETACL, which has no
specification (yet).
However, nfsd_map_status() maps nfserr_symlink and nfserr_wrong_type
to nfserr_inval, which does not align with RFC 1094. This logic was
introduced only recently by commit 438f81e0e9 ("nfsd: move error
choice for incorrect object types to version-specific code."). Given
that we have no INVAL or SERVERFAULT status in NFSv2, probably the
only choice is NFSERR_IO.
Fixes: 438f81e0e9 ("nfsd: move error choice for incorrect object types to version-specific code.")
Reviewed-by: NeilBrown <neil@brown.name>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit bf0fe9ad3d ]
The program templates for decoder/argument.j2 and encoder/result.j2
unconditionally add 'struct' prefix to all types. This is incorrect
when an RPC protocol specification lists a typedef'd basic type or
an enum as a procedure argument or result (e.g., NFSv2's fhandle or
stat), resulting in compiler errors when building generated C code.
Fixes: 4b132aacb0 ("tools: Add xdrgen")
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2df8b310bc ]
The origin bio carries blk-cgroup information which could be set from
foreground(task_css(css) - wbc->wb->blkcg_css), so the blkcg won't
control buffer io since commit ca522482e3 ("dm: pass NULL bdev to
bio_alloc_clone"). The synchronous io is still under control by blkcg,
because 'bio->bi_blkg' is set by io submitting task which has been added
into 'cgroup.procs'.
Fix it by using bio_clone_blkg_association when submitting a cloned bio.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=220985
Fixes: ca522482e3 ("dm: pass NULL bdev to bio_alloc_clone")
Reported-by: Zhihao Cheng <chengzhihao1@huawei.com>
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Tested-by: Zhihao Cheng <chengzhihao1@huawei.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c1e4f1dccb ]
When tearing down a context entry, the current implementation zeros the
entire 128-bit entry using multiple 64-bit writes. This creates a window
where the hardware can fetch a "torn" entry — where some fields are
already zeroed while the 'Present' bit is still set — leading to
unpredictable behavior or spurious faults.
While x86 provides strong write ordering, the compiler may reorder writes
to the two 64-bit halves of the context entry. Even without compiler
reordering, the hardware fetch is not guaranteed to be atomic with
respect to multiple CPU writes.
Align with the "Guidance to Software for Invalidations" in the VT-d spec
(Section 6.5.3.3) by implementing the recommended ownership handshake:
1. Clear only the 'Present' (P) bit of the context entry first to
signal the transition of ownership from hardware to software.
2. Use dma_wmb() to ensure the cleared bit is visible to the IOMMU.
3. Perform the required cache and context-cache invalidation to ensure
hardware no longer has cached references to the entry.
4. Fully zero out the entry only after the invalidation is complete.
Also, add a dma_wmb() to context_set_present() to ensure the entry
is fully initialized before the 'Present' bit becomes visible.
Fixes: ba39592764 ("Intel IOMMU: Intel IOMMU driver")
Reported-by: Dmytro Maluka <dmaluka@chromium.org>
Closes: https://lore.kernel.org/all/aTG7gc7I5wExai3S@google.com/
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Dmytro Maluka <dmaluka@chromium.org>
Reviewed-by: Samiullah Khawaja <skhawaja@google.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Link: https://lore.kernel.org/r/20260120061816.2132558-3-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 75ed00055c ]
The Intel VT-d Scalable Mode PASID table entry consists of 512 bits (64
bytes). When tearing down an entry, the current implementation zeros the
entire 64-byte structure immediately using multiple 64-bit writes.
Since the IOMMU hardware may fetch these 64 bytes using multiple
internal transactions (e.g., four 128-bit bursts), updating or zeroing
the entire entry while it is active (P=1) risks a "torn" read. If a
hardware fetch occurs simultaneously with the CPU zeroing the entry, the
hardware could observe an inconsistent state, leading to unpredictable
behavior or spurious faults.
Follow the "Guidance to Software for Invalidations" in the VT-d spec
(Section 6.5.3.3) by implementing the recommended ownership handshake:
1. Clear only the 'Present' (P) bit of the PASID entry.
2. Use a dma_wmb() to ensure the cleared bit is visible to hardware
before proceeding.
3. Execute the required invalidation sequence (PASID cache, IOTLB, and
Device-TLB flush) to ensure the hardware has released all cached
references.
4. Only after the flushes are complete, zero out the remaining fields
of the PASID entry.
Also, add a dma_wmb() in pasid_set_present() to ensure that all other
fields of the PASID entry are visible to the hardware before the Present
bit is set.
Fixes: 0bbeb01a4f ("iommu/vt-d: Manage scalalble mode PASID tables")
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Dmytro Maluka <dmaluka@chromium.org>
Reviewed-by: Samiullah Khawaja <skhawaja@google.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Link: https://lore.kernel.org/r/20260120061816.2132558-2-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 22d169bdd2 ]
When writing the address of a freshly allocated zero-initialized PASID
table to a PASID directory entry, do that after the CPU cache flush for
this PASID table, not before it, to avoid the time window when this
PASID table may be already used by non-coherent IOMMU hardware while
its contents in RAM is still some random old data, not zero-initialized.
Fixes: 194b3348bd ("iommu/vt-d: Fix PASID directory pointer coherency")
Signed-off-by: Dmytro Maluka <dmaluka@chromium.org>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Link: https://lore.kernel.org/r/20251221123508.37495-1-dmaluka@chromium.org
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6070a44051 ]
In __print_txpwr_map(), memory is allocated to bufp via vzalloc().
If max_valid_addr is 0, the function returns -EOPNOTSUPP immediately
without freeing bufp, leading to a memory leak.
Since the validation of max_valid_addr does not depend on the allocated
memory, fix this by moving the vzalloc() call after the check.
Compile tested only. Issue found using a prototype static analysis tool
and code review.
Fixes: 036042e157 ("wifi: rtw89: debug: txpwr table supports Wi-Fi 7 chips")
Suggested-by: Zong-Zhe Yang <kevin_yang@realtek.com>
Signed-off-by: Zilin Guan <zilin@seu.edu.cn>
Reviewed-by: Zong-Zhe Yang <kevin_yang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20260116130834.1413924-1-zilin@seu.edu.cn
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 959ac08a2c ]
Per PCIe r7.0, sec 2.2.6.2.1 and 7.5.3.4, a Requester may not use 8-bit Tags
unless its Extended Tag Field Enable is set, but all Receivers/Completers
must handle 8-bit Tags correctly regardless of their Extended Tag Field
Enable.
Some devices do not handle 8-bit Tags as Completers, so add a quirk for
them. If we find such a device, we disable Extended Tags for the entire
hierarchy to make peer-to-peer DMA possible.
The 3ware 9650SA seems to have issues with handling 8-bit tags. Mark it as
broken.
This fixes PCI Parity Errors like :
3w-9xxx: scsi0: ERROR: (0x06:0x000C): PCI Parity Error: clearing.
3w-9xxx: scsi0: ERROR: (0x06:0x000D): PCI Abort: clearing.
3w-9xxx: scsi0: ERROR: (0x06:0x000E): Controller Queue Error: clearing.
3w-9xxx: scsi0: ERROR: (0x06:0x0010): Microcontroller Error: clearing.
Fixes: 60db3a4d8c ("PCI: Enable PCIe Extended Tags if supported")
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=202425
Signed-off-by: Jörg Wedekind <joerg@wedekind.de>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Link: https://patch.msgid.link/20260119143114.21948-1-joerg@wedekind.de
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e8a1e7eaa1 ]
__sprint_symbol() might access an invalid pointer when
kallsyms_lookup_buildid() returns a symbol found by
ftrace_mod_address_lookup().
The ftrace lookup function must set both @modname and @modbuildid the same
way as module_address_lookup().
Link: https://lkml.kernel.org/r/20251128135920.217303-7-pmladek@suse.com
Fixes: 9294523e37 ("module: add printk formats to add module build ID to stacktraces")
Signed-off-by: Petr Mladek <pmladek@suse.com>
Reviewed-by: Aaron Tomlin <atomlin@atomlin.com>
Acked-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Daniel Borkman <daniel@iogearbox.net>
Cc: Daniel Gomez <da.gomez@samsung.com>
Cc: John Fastabend <john.fastabend@gmail.com>
Cc: Kees Cook <kees@kernel.org>
Cc: Luis Chamberalin <mcgrof@kernel.org>
Cc: Marc Rutland <mark.rutland@arm.com>
Cc: "Masami Hiramatsu (Google)" <mhiramat@kernel.org>
Cc: Petr Pavlu <petr.pavlu@suse.com>
Cc: Sami Tolvanen <samitolvanen@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit acfdbb4ab2 ]
Add a helper function for reading the optional "build_id" member of struct
module. It is going to be used also in ftrace_mod_address_lookup().
Use "#ifdef" instead of "#if IS_ENABLED()" to match the declaration of the
optional field in struct module.
Link: https://lkml.kernel.org/r/20251128135920.217303-4-pmladek@suse.com
Signed-off-by: Petr Mladek <pmladek@suse.com>
Reviewed-by: Daniel Gomez <da.gomez@samsung.com>
Reviewed-by: Petr Pavlu <petr.pavlu@suse.com>
Cc: Aaron Tomlin <atomlin@atomlin.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Daniel Borkman <daniel@iogearbox.net>
Cc: John Fastabend <john.fastabend@gmail.com>
Cc: Kees Cook <kees@kernel.org>
Cc: Luis Chamberalin <mcgrof@kernel.org>
Cc: Marc Rutland <mark.rutland@arm.com>
Cc: "Masami Hiramatsu (Google)" <mhiramat@kernel.org>
Cc: Sami Tolvanen <samitolvanen@google.com>
Cc: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Stable-dep-of: e8a1e7eaa1 ("kallsyms/ftrace: set module buildid in ftrace_mod_address_lookup()")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit cd6735896d ]
bpf_address_lookup() has been used only in kallsyms_lookup_buildid(). It
was supposed to set @modname and @modbuildid when the symbol was in a
module.
But it always just cleared @modname because BPF symbols were never in a
module. And it did not clear @modbuildid because the pointer was not
passed.
The wrapper is no longer needed. Both @modname and @modbuildid are now
always initialized to NULL in kallsyms_lookup_buildid().
Remove the wrapper and rename __bpf_address_lookup() to
bpf_address_lookup() because this variant is used everywhere.
[akpm@linux-foundation.org: fix loongarch]
Link: https://lkml.kernel.org/r/20251128135920.217303-6-pmladek@suse.com
Fixes: 9294523e37 ("module: add printk formats to add module build ID to stacktraces")
Signed-off-by: Petr Mladek <pmladek@suse.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Cc: Aaron Tomlin <atomlin@atomlin.com>
Cc: Daniel Borkman <daniel@iogearbox.net>
Cc: Daniel Gomez <da.gomez@samsung.com>
Cc: John Fastabend <john.fastabend@gmail.com>
Cc: Kees Cook <kees@kernel.org>
Cc: Luis Chamberalin <mcgrof@kernel.org>
Cc: Marc Rutland <mark.rutland@arm.com>
Cc: "Masami Hiramatsu (Google)" <mhiramat@kernel.org>
Cc: Petr Pavlu <petr.pavlu@suse.com>
Cc: Sami Tolvanen <samitolvanen@google.com>
Cc: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit de8a70cefc ]
Since commit be102eb6a0 ("netfilter: nf_conncount: rework API to use
sk_buff directly"), we skip the adding and trigger a GC when the ct is
confirmed. For connections originated from local to local it doesn't
work because the connection is confirmed on POSTROUTING, therefore
tracking on the INPUT hook is always skipped.
In order to fix this, we check whether skb input ifindex is set to
loopback ifindex. If it is then we fallback on a GC plus track operation
skipping the optimization. This fallback is necessary to avoid
duplicated tracking of a packet train e.g 10 UDP datagrams sent on a
burst when initiating the connection.
Tested with xt_connlimit/nft_connlimit and OVS limit and with a HTTP
server and iperf3 on UDP mode.
Fixes: be102eb6a0 ("netfilter: nf_conncount: rework API to use sk_buff directly")
Reported-by: Michal Slabihoudek <michal.slabihoudek@gooddata.com>
Closes: https://lore.kernel.org/netfilter/6989BD9F-8C24-4397-9AD7-4613B28BF0DB@gooddata.com/
Signed-off-by: Fernando Fernandez Mancera <fmancera@suse.de>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit cda26c6459 ]
As far as I can see nothing bad can happen when NFTA_TARGET/MATCH_NAME
are too large because this calls x_tables helpers which check for the
length, but it seems better to already reject it during netlink parsing.
Rest of the changes avoid silent u8/u16 truncations.
For _TYPE, its expected to be only 1 or 0. In x_tables world, this
variable is set by kernel, for IPT_SO_GET_REVISION_TARGET its 1, for
all others its set to 0.
As older versions of nf_tables permitted any value except 1 to mean 'match',
keep this as-is but sanitize the value for consistency.
Fixes: 0ca743a559 ("netfilter: nf_tables: add compatibility layer for x_tables")
Reviewed-by: Fernando Fernandez Mancera <fmancera@suse.de>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 21d033e472 ]
After the optimization to only perform one GC per jiffy, a new problem
was introduced. If more than 8 new connections are tracked per jiffy the
list won't be cleaned up fast enough possibly reaching the limit
wrongly.
In order to prevent this issue, only skip the GC if it was already
triggered during the same jiffy and the increment is lower than the
clean up limit. In addition, increase the clean up limit to 64
connections to avoid triggering GC too often and do more effective GCs.
This has been tested using a HTTP server and several
performance tools while having nft_connlimit/xt_connlimit or OVS limit
configured.
Output of slowhttptest + OVS limit at 52000 connections:
slow HTTP test status on 340th second:
initializing: 0
pending: 432
connected: 51998
error: 0
closed: 0
service available: YES
Fixes: d265929930 ("netfilter: nf_conncount: reduce unnecessary GC")
Reported-by: Aleksandra Rukomoinikova <ARukomoinikova@k2.cloud>
Closes: https://lore.kernel.org/netfilter/b2064e7b-0776-4e14-adb6-c68080987471@k2.cloud/
Signed-off-by: Fernando Fernandez Mancera <fmancera@suse.de>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c0362b5748 ]
For convenience when performing GC over the connection list, make
nf_conncount_gc_list() to disable BH. This unifies the behavior with
nf_conncount_add() and nf_conncount_count().
Signed-off-by: Fernando Fernandez Mancera <fmancera@suse.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Stable-dep-of: 21d033e472 ("netfilter: nf_conncount: increase the connection clean up limit to 64")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6f93616a73 ]
If a transaction fails the final validation in the commit hook, the table
validation state is changed to NFT_VALIDATE_DO and a replay of the batch is
performed. Every rule insert will then do a graph validation.
This is much slower, but provides better error reporting to the user
because we can point at the rule that introduces the validation issue.
Without this reset the affected table(s) remain in full validation mode,
i.e. on next transaction we start with slow-mode.
This makes the next transaction after a failed incremental update very slow:
# time iptables-restore < /tmp/ruleset
real 0m0.496s [..]
# time iptables -A CALLEE -j CALLER
iptables v1.8.11 (nf_tables): RULE_APPEND failed (Too many links): rule in chain CALLEE
real 0m0.022s [..]
# time iptables-restore < /tmp/ruleset
real 1m22.355s [..]
After this patch, 2nd iptables-restore is back to ~0.5s.
Fixes: 9a32e98506 ("netfilter: nf_tables: don't write table validation state without mutex")
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 491f2927ae ]
s_fc_lock can be acquired from inode eviction and thus is
reclaim unsafe. Since the fast commit path holds s_fc_lock while writing
the commit log, allocations under the lock can enter reclaim and invert
the lock order with fs_reclaim. Add ext4_fc_lock()/ext4_fc_unlock()
helpers which acquire s_fc_lock under memalloc_nofs_save()/restore()
context and use them everywhere so allocations under the lock cannot
recurse into filesystem reclaim.
Fixes: 6593714d67 ("ext4: hold s_fc_lock while during fast commit")
Signed-off-by: Li Chen <me@linux.beauty>
Reviewed-by: Baokun Li <libaokun1@huawei.com>
Reviewed-by: Zhang Yi <yi.zhang@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://patch.msgid.link/20260106120621.440126-1-me@linux.beauty
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e1696c8bd0 ]
Seems that there is an assumption that this function should be called
only for netdev interfaces, but it can also be called in suspend, or
from nl80211_netlink_notify (indirectly).
Note that the documentation of NL80211_ATTR_SOCKET_OWNER explicitly
says that NAN interfaces would be destroyed as well in the
nl80211_netlink_notify case.
Fix this by also stopping P2P and NAN.
Fixes: cb3b7d8765 ("cfg80211: add start / stop NAN commands")
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20260107140430.dab142cbef0b.I290cc47836d56dd7e35012ce06bec36c6da688cd@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2a14e91b6d ]
Set a 0xff value for i2c reads of an mctp-i2c device. Otherwise reads
will return "val" from the i2c bus driver. For i2c-aspeed and
i2c-npcm7xx that is a stack uninitialised u8.
Tested with "i2ctransfer -y 1 r10@0x34" where 0x34 is a mctp-i2c
instance, now it returns all 0xff.
Fixes: f5b8abf9fc ("mctp i2c: MCTP I2C binding driver")
Signed-off-by: Matt Johnston <matt@codeconstruct.com.au>
Link: https://patch.msgid.link/20260113-mctp-read-fix-v1-1-70c4b59c741c@codeconstruct.com.au
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ae4744e173 ]
The MCTP I2C slave callback did not handle I2C_SLAVE_READ_REQUESTED
events. As a result, i2c read event will trigger repeated reception of
old data, reset rx_pos when a read request is received.
Signed-off-by: Jian Zhang <zhangjian.3032@bytedance.com>
Link: https://patch.msgid.link/20260108101829.1140448-1-zhangjian.3032@bytedance.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Stable-dep-of: 2a14e91b6d ("mctp i2c: initialise event handler read bytes")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 77449e453d ]
When a filesystem is frozen, quotactl_block() enters a retry loop
waiting for the filesystem to thaw. It acquires s_umount, checks the
freeze state, drops s_umount and uses sb_start_write() - sb_end_write()
pair to wait for the unfreeze.
However, this retry loop can trigger a livelock issue, specifically on
kernels with preemption disabled.
The mechanism is as follows:
1. freeze_super() sets SB_FREEZE_WRITE and calls sb_wait_write().
2. sb_wait_write() calls percpu_down_write(), which initiates
synchronize_rcu().
3. Simultaneously, quotactl_block() spins in its retry loop, immediately
executing the sb_start_write() - sb_end_write() pair.
4. Because the kernel is non-preemptible and the loop contains no
scheduling points, quotactl_block() never yields the CPU. This
prevents that CPU from reaching an RCU quiescent state.
5. synchronize_rcu() in the freezer thread waits indefinitely for the
quotactl_block() CPU to report a quiescent state.
6. quotactl_block() spins indefinitely waiting for the freezer to
advance, which it cannot do as it is blocked on the RCU sync.
This results in a hang of the freezer process and 100% CPU usage by the
quota process.
While this can occur intermittently on multi-core systems, it is
reliably reproducing on a node with the following script, running both
the freezer and the quota toggle on the same CPU:
# mkfs.ext4 -O quota /dev/sda 2g && mkdir a_mount
# mount /dev/sda -o quota,usrquota,grpquota a_mount
# taskset -c 3 bash -c "while true; do xfs_freeze -f a_mount; \
xfs_freeze -u a_mount; done" &
# taskset -c 3 bash -c "while true; do quotaon a_mount; \
quotaoff a_mount; done" &
Adding cond_resched() to the retry loop fixes the issue. It acts as an
RCU quiescent state, allowing synchronize_rcu() in percpu_down_write()
to complete.
Fixes: 576215cffd ("fs: Drop wait_unfrozen wait queue")
Signed-off-by: Abhishek Bapat <abhishekbapat@google.com>
Link: https://patch.msgid.link/20260115213103.1089129-1-abhishekbapat@google.com
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e62102ac9b ]
In case of multi-link connection, WCN7850 firmware crashes due to WoW
offloads enabled on both primary and secondary links.
Change to do it only on primary link to fix it.
Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.1.c5-00284-QCAHMTSWPL_V1.0_V2.0_SILICONZ-1
Fixes: 32f7b19668 ("wifi: ath12k: support MLO as well if single_chip_mlo_support flag is set")
Signed-off-by: Baochen Qiang <baochen.qiang@oss.qualcomm.com>
Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com>
Link: https://patch.msgid.link/20251103-ath12-primary-link-wow-v1-1-3cf523dc09f0@oss.qualcomm.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 83014d82a1 ]
When mapping a p2pdma page the page reference count is initialised to 1
prior to calling vm_insert_page(). This is to avoid vm_insert_page()
warning if the page refcount is zero. Prior to setting the page count there
is a check to ensure the page is currently free (ie. has a zero reference
count).
However vm_insert_page() can fail. In this case the pages are freed back to
the genalloc pool, but that does not reset the page refcount. So a future
allocation of the same page will see the elevated page refcount from the
previous set_page_count() call triggering the VM_WARN_ON_ONCE_PAGE checking
that the page is free.
Fix this by resetting the page refcount to zero using set_page_count().
Note that put_page() is not used because that would result in freeing the
page twice due to implicitly calling p2pdma_folio_free().
Fixes: b7e2823787 ("mm/mm_init: move p2pdma page refcount initialisation to p2pdma")
Signed-off-by: Alistair Popple <apopple@nvidia.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Logan Gunthorpe <logang@deltatee.com>
Acked-by: Balbir Singh <balbirs@nvidia.com>
Link: https://patch.msgid.link/20260112005440.998543-1-apopple@nvidia.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 62171369cf ]
In pcie_ptm_create_debugfs(), if devm_kasprintf() fails after successfully
allocating ptm_debugfs with kzalloc(), the function returns without freeing
the allocated memory, resulting in a memory leak.
Free ptm_debugfs before returning in the devm_kasprintf() error path and in
pcie_ptm_destroy_debugfs().
Fixes: 132833405e ("PCI: Add debugfs support for exposing PTM context")
Signed-off-by: Aadityarangan Shridhar Iyengar <adiyenga@cisco.com>
[bhelgaas: squash additional fix from Mani:
https://lore.kernel.org/r/pdp4xc4d5ee3e547mmdro5riui3mclduqdl7j6iclfbozo2a4c@7m3qdm6yrhuv]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Manivannan Sadhasivam <mani@kernel.org>
Link: https://patch.msgid.link/20260111163650.33168-1-adiyenga@cisco.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e9f5a55b70 ]
The functon dm_blk_report_zones reads md->zone_revalidate_map, however it
may change while the function is running. Use READ_ONCE.
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Fixes: 37f53a2c60 ("dm: fix dm_blk_report_zones")
Reviewed-by: Benjamin Marzinski <bmarzins@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
