A delay unit of 0 is a valid entry, thus it is not valid to check for
unused delays. Instead, check the value field; if that is zero, the
given delay is unset.
Fixes: 4426e6b4ec ("spi: tegra114: Don't fail set_cs_timing when delays are zero")
Cc: stable@vger.kernel.org
Signed-off-by: Aaron Kling <webgeek1234@gmail.com>
Reviewed-by: Jon Hunter <jonathanh@nvidia.com>
Link: https://patch.msgid.link/20250506-spi-tegra114-fixup-v1-1-136dc2f732f3@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Jakub Kicinski says:
====================
netlink: specs: remove phantom structs
rt-netlink and nl80211 have a few structs which may be helpful for Python
decoding of binary attrs, but which don't actually exist in the C uAPI.
This prevents us from using struct pointers for binary types in C.
We could support this situation better in the codegen, or add these
structs to uAPI. That said Johannes suggested we remove the WiFi
structs for now, and the rt-link ones are semi-broken.
Drop the struct definitions, for now, if someone has a need to use
such structs in Python (as opposed to them being defined for completeness)
we can revist.
v1: https://lore.kernel.org/20250505170215.253672-1-kuba@kernel.org
====================
Link: https://patch.msgid.link/20250506194101.696272-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
devconf is even odder than SNMP. On input it reports an array of u32s
which seem to be indexed by the enum values - 1. On output kernel
expects a nest where each attr has the enum type as the nla type.
sub-type: u32 is probably best we can do right now.
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Link: https://patch.msgid.link/20250506194101.696272-5-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
uAPI doesn't define structs for the SNMP counters, just enums to index
them as arrays. Switch to the same representation in the spec. C codegen
will soon need all the struct types to actually exist.
Note that the existing definition was broken, anyway, as the first
member should be the number of counters reported.
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Link: https://patch.msgid.link/20250506194101.696272-4-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
C codegen will soon support using struct types for binary attrs.
Correct the struct names in OvS specs.
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Link: https://patch.msgid.link/20250506194101.696272-3-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
C codegen will soon use structs for binary types. A handful of structs
in WiFi carry information elements from the wire, defined by the standard.
The structs are not part of uAPI, so we can't use them in C directly.
We could add them to the uAPI or add some annotation to tell the codegen
to output a local version to the user header. The former seems arbitrary
since we don't expose structs for most of the standard. The latter seems
like a lot of work for a rare occurrence. Drop the struct info for now.
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Link: https://lore.kernel.org/004030652d592b379e730be2f0344bebc4a03475.camel@sipsolutions.net
Link: https://patch.msgid.link/20250506194101.696272-2-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jakub Kicinski says:
====================
tools: ynl-gen: split presence metadata
The presence metadata indicates whether given attribute was/should be
added to the Netlink message. We have 3 types of such metadata:
- bit presence for simple values like integers,
- len presence for variable size attrs, like binary and strings,
- count for arrays.
Previously this information was spread around with first two types
living in a dedicated sub-struct called _present. The counts resided
directly in the main struct with an n_ prefix.
Reshuffle these an uniformly store them in dedicated sub-structs.
The immediate motivation is that current scheme causes name collisions
for TC.
====================
Link: https://patch.msgid.link/20250505165208.248049-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
While we reshuffle the presence members, move the counts as well.
Previously array count members would have been place directly in
the struct, so:
struct family_op_req {
struct {
u32 a:1;
u32 b:1;
} _present;
struct {
u32 bin;
} _len;
u32 a;
u64 b;
const unsigned char *bin;
u32 n_multi; << count
u32 *multi; << objects
};
Since len has been moved to its own presence struct move the count
as well:
struct family_op_req {
struct {
u32 a:1;
u32 b:1;
} _present;
struct {
u32 bin;
} _len;
struct {
u32 multi; << count
} _count;
u32 a;
u64 b;
const unsigned char *bin;
u32 *multi; << objects
};
This improves the consistency and allows us to remove some hacks
in the codegen. Unlike for len there is no known name collision
with the existing scheme.
Link: https://patch.msgid.link/20250505165208.248049-4-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Each YNL struct contains the data and a sub-struct indicating which
fields are valid. Something like:
struct family_op_req {
struct {
u32 a:1;
u32 b:1;
u32 bin_len;
} _present;
u32 a;
u64 b;
const unsigned char *bin;
};
Note that the bin object 'bin' has a length stored, and that length
has a _len suffix added to the field name. This breaks if there
is a explicit field called bin_len, which is the case for some
TC actions. Move the length fields out of the _present struct,
create a new struct called _len:
struct family_op_req {
struct {
u32 a:1;
u32 b:1;
} _present;
struct {
u32 bin;
} _len;
u32 a;
u64 b;
const unsigned char *bin;
};
This should prevent name collisions and help with the packing
of the struct.
Unfortunately this is a breaking change, but hopefully the migration
isn't too painful.
Link: https://patch.msgid.link/20250505165208.248049-3-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Internal change to the code gen. Rename how we indicate a type
has a single bit presence from using a 'bit' string to 'present'.
This is a noop in terms of generated code but will make next
breaking change easier.
Reviewed-by: David Wei <dw@davidwei.uk>
Link: https://patch.msgid.link/20250505165208.248049-2-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When sending out any kind of traffic, it is essential that the driver
keeps reporting BQL of the number of bytes that have been sent so that
BQL can track the amount of data in the queue and prevents it from
overflowing. If BQL is not reported, the driver may continue sending
packets even when the queue is full, leading to packet loss, congestion
and decreased network performance. Currently this is missing in
emac_xmit_xdp_frame() and this patch fixes it.
Fixes: 62aa3246f4 ("net: ti: icssg-prueth: Add XDP support")
Signed-off-by: Meghana Malladi <m-malladi@ti.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/20250506110546.4065715-4-m-malladi@ti.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add __netif_tx_lock() to ensure that only one packet is being
transmitted at a time to avoid race conditions in the netif_txq
struct and prevent packet data corruption. Failing to do so causes
kernel panic with the following error:
[ 2184.746764] ------------[ cut here ]------------
[ 2184.751412] kernel BUG at lib/dynamic_queue_limits.c:99!
[ 2184.756728] Internal error: Oops - BUG: 00000000f2000800 [#1] PREEMPT SMP
logs: https://gist.github.com/MeghanaMalladiTI/9c7aa5fc3b7fb03f87c74aad487956e9
The lock is acquired before calling emac_xmit_xdp_frame() and released after the
call returns. This ensures that the TX queue is protected from concurrent access
during the transmission of XDP frames.
Fixes: 62aa3246f4 ("net: ti: icssg-prueth: Add XDP support")
Signed-off-by: Meghana Malladi <m-malladi@ti.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/20250506110546.4065715-3-m-malladi@ti.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
xdp_features demonstrates what all XDP capabilities are supported
on a given network device. The driver needs to set these xdp_features
flag to let the network stack know what XDP features a given driver
is supporting. These flags need to be set for a given ndev irrespective
of any XDP program being loaded or not.
Fixes: 62aa3246f4 ("net: ti: icssg-prueth: Add XDP support")
Signed-off-by: Meghana Malladi <m-malladi@ti.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/20250506110546.4065715-2-m-malladi@ti.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When switching network namespaces with the bpf_redirect_peer helper, the
skb->mark and skb->tstamp fields are not zeroed out like they can be on
a typical netns switch. This patch clarifies that in the helper
description.
Signed-off-by: Paul Chaignon <paul.chaignon@gmail.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://patch.msgid.link/ccc86af26d43c5c0b776bcba2601b7479c0d46d0.1746460653.git.paul.chaignon@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When bpf_redirect_peer is used to redirect packets to a device in
another network namespace, the skb isn't scrubbed. That can lead skb
information from one namespace to be "misused" in another namespace.
As one example, this is causing Cilium to drop traffic when using
bpf_redirect_peer to redirect packets that just went through IPsec
decryption to a container namespace. The following pwru trace shows (1)
the packet path from the host's XFRM layer to the container's XFRM
layer where it's dropped and (2) the number of active skb extensions at
each function.
NETNS MARK IFACE TUPLE FUNC
4026533547 d00 eth0 10.244.3.124:35473->10.244.2.158:53 xfrm_rcv_cb
.active_extensions = (__u8)2,
4026533547 d00 eth0 10.244.3.124:35473->10.244.2.158:53 xfrm4_rcv_cb
.active_extensions = (__u8)2,
4026533547 d00 eth0 10.244.3.124:35473->10.244.2.158:53 gro_cells_receive
.active_extensions = (__u8)2,
[...]
4026533547 0 eth0 10.244.3.124:35473->10.244.2.158:53 skb_do_redirect
.active_extensions = (__u8)2,
4026534999 0 eth0 10.244.3.124:35473->10.244.2.158:53 ip_rcv
.active_extensions = (__u8)2,
4026534999 0 eth0 10.244.3.124:35473->10.244.2.158:53 ip_rcv_core
.active_extensions = (__u8)2,
[...]
4026534999 0 eth0 10.244.3.124:35473->10.244.2.158:53 udp_queue_rcv_one_skb
.active_extensions = (__u8)2,
4026534999 0 eth0 10.244.3.124:35473->10.244.2.158:53 __xfrm_policy_check
.active_extensions = (__u8)2,
4026534999 0 eth0 10.244.3.124:35473->10.244.2.158:53 __xfrm_decode_session
.active_extensions = (__u8)2,
4026534999 0 eth0 10.244.3.124:35473->10.244.2.158:53 security_xfrm_decode_session
.active_extensions = (__u8)2,
4026534999 0 eth0 10.244.3.124:35473->10.244.2.158:53 kfree_skb_reason(SKB_DROP_REASON_XFRM_POLICY)
.active_extensions = (__u8)2,
In this case, there are no XFRM policies in the container's network
namespace so the drop is unexpected. When we decrypt the IPsec packet,
the XFRM state used for decryption is set in the skb extensions. This
information is preserved across the netns switch. When we reach the
XFRM policy check in the container's netns, __xfrm_policy_check drops
the packet with LINUX_MIB_XFRMINNOPOLS because a (container-side) XFRM
policy can't be found that matches the (host-side) XFRM state used for
decryption.
This patch fixes this by scrubbing the packet when using
bpf_redirect_peer, as is done on typical netns switches via veth
devices except skb->mark and skb->tstamp are not zeroed.
Fixes: 9aa1206e8f ("bpf: Add redirect_peer helper")
Signed-off-by: Paul Chaignon <paul.chaignon@gmail.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://patch.msgid.link/1728ead5e0fe45e7a6542c36bd4e3ca07a73b7d6.1746460653.git.paul.chaignon@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The official Airoha EN7581 firmware requires adding max_packet field in
ppe_mbox_data struct while the unofficial one used to develop the Airoha
EN7581 flowtable support does not require this field.
This patch does not introduce any real backwards compatible issue since
EN7581 fw is not publicly available in linux-firmware or other
repositories (e.g. OpenWrt) yet and the official fw version will use this
new layout. For this reason this change needs to be backported.
Moreover, make explicit the padding added by the compiler introducing
the rsv array in init_info struct.
At the same time use u32 instead of int for init_info and set_info
struct definitions in ppe_mbox_data struct.
Fixes: 23290c7bc1 ("net: airoha: Introduce Airoha NPU support")
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Link: https://patch.msgid.link/20250506-airoha-en7581-fix-ppe_mbox_data-v5-1-29cabed6864d@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEEjF9xRqF1emXiQiqU1w0aZmrPKyEFAmgb2D4ACgkQ1w0aZmrP
KyHB4g//SzExpaI5eTduMIg9OwLmWyUNpsxCX8Qk3E5FX8jyGZDU1CAyTnbYZyuJ
VAn+5PwhhswEDs85ZgXiHXMjdOXvmPs1l0IKVVlM4DoJqlRDXpAcuKzPH0m0J46Q
A+nfIIsFfH8roQq+PhLPQ3TEOnIGK1vgNWVICl4oX5sYjkYTIzPnadEaTpNsG26I
gZlvpqM9EH7KLWqhcX1h2/O+JB/6oNaFQTUK77qc9sGijMVMUlGUBtDN40aZ1IEW
RP6l6J1Oea3j3wavmrrQxHSDtvGS4rnC0qTQ4Xs3OIeTrQiou4cmsCqp+ZLmMu7Q
YNBU04o78uEOX9n3ux6Xm4tr2WLizHFNkGBU+m0WQSsEGYx7CWsALXIqnEsZWDLQ
IK4y/d7M0rWLNB4nYTePIBPjKt+qzBe0gTgVr9jMLFI/X60vz3XYHJDBovaBL3dd
skiVohmYxjiQj5Y6WPtZaLvubzVEULfjVGHatYLGheLXHsEO/BjXFJeIfYK6bmfO
eXAx9pPsnqCbtKzh6n+tQzYCeRhlw+Oh9Uw48MDpeIX+cTUNr+eaN1LalQz3C3zX
KqfnK/ZlWUWpQmyLzhMA6DwSUKPBbJ5nzl/NuWSowUPfnldT++rGAuW4lFOTtMPo
DsJDnONuE6FPaNU5Ef3rIivVfrAnCAmRK797psL0buHDY9YRGcM=
=Jwld
-----END PGP SIGNATURE-----
Merge tag 'nf-25-05-08' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf
Pablo Neira Ayuso says:
====================
Netfilter/IPVS fixes for net
The following patchset contain Netfilter/IPVS fixes for net:
1) Fix KMSAN uninit-value in do_output_route4, reported by syzbot.
Patch from Julian Anastasov.
2) ipset hashtable set type breaks up the hashtable into regions of
2^10 buckets. Fix the macro that determines the hashtable lock
region to protect concurrent updates. From Jozsef Kadlecsik.
* tag 'nf-25-05-08' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf:
netfilter: ipset: fix region locking in hash types
ipvs: fix uninit-value for saddr in do_output_route4
====================
Link: https://patch.msgid.link/20250507221952.86505-1-pablo@netfilter.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This patch replaces the manual Netlink attribute iteration in
output_userspace() with nla_for_each_nested(), which ensures that only
well-formed attributes are processed.
Fixes: ccb1352e76 ("net: Add Open vSwitch kernel components.")
Signed-off-by: Eelco Chaudron <echaudro@redhat.com>
Acked-by: Ilya Maximets <i.maximets@ovn.org>
Acked-by: Aaron Conole <aconole@redhat.com>
Link: https://patch.msgid.link/0bd65949df61591d9171c0dc13e42cea8941da10.1746541734.git.echaudro@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Unlike sysfs, the lifetime of configfs objects is controlled by
userspace. There is no mechanism for the kernel to find and delete all
created config-items. Instead, the configfs-tsm-report mechanism has an
expectation that tsm_unregister() can happen at any time and cause
established config-item access to start failing.
That expectation is not fully satisfied. While tsm_report_read(),
tsm_report_{is,is_bin}_visible(), and tsm_report_make_item() safely fail
if tsm_ops have been unregistered, tsm_report_privlevel_store()
tsm_report_provider_show() fail to check for ops registration. Add the
missing checks for tsm_ops having been removed.
Now, in supporting the ability for tsm_unregister() to always succeed,
it leaves the problem of what to do with lingering config-items. The
expectation is that the admin that arranges for the ->remove() (unbind)
of the ${tsm_arch}-guest driver is also responsible for deletion of all
open config-items. Until that deletion happens, ->probe() (reload /
bind) of the ${tsm_arch}-guest driver fails.
This allows for emergency shutdown / revocation of attestation
interfaces, and requires coordinated restart.
Fixes: 70e6f7e2b9 ("configfs-tsm: Introduce a shared ABI for attestation reports")
Cc: stable@vger.kernel.org
Cc: Suzuki K Poulose <suzuki.poulose@arm.com>
Cc: Steven Price <steven.price@arm.com>
Cc: Sami Mujawar <sami.mujawar@arm.com>
Cc: Borislav Petkov (AMD) <bp@alien8.de>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Reviewed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Reported-by: Cedric Xing <cedric.xing@intel.com>
Reviewed-by: Kai Huang <kai.huang@intel.com>
Link: https://patch.msgid.link/20250430203331.1177062-1-dan.j.williams@intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
The "intf" list iterator is an invalid pointer if the correct
"intf->intf_num" is not found. Calling atomic_dec(&intf->nr_users) on
and invalid pointer will lead to memory corruption.
We don't really need to call atomic_dec() if we haven't called
atomic_add_return() so update the if (intf->in_shutdown) path as well.
Fixes: 8e76741c3d ("ipmi: Add a limit on the number of users that may use IPMI")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Message-ID: <aBjMZ8RYrOt6NOgi@stanley.mountain>
Signed-off-by: Corey Minyard <corey@minyard.net>
Don't have the other users that do things at panic time (the watchdog)
do all this themselves, provide a function to do it.
Also, with the new design where most stuff happens at thread context,
a few things needed to be fixed to avoid doing locking in a panic
context.
Signed-off-by: Corey Minyard <cminyard@mvista.com>
It was possible for the SSIF thread to stop and quit before the
kthread_stop() call because ssif->stopping was set before the
stop. So only exit the SSIF thread is kthread_should_stop()
returns true.
There is no need to wake the thread, as the wait will be interrupted
by kthread_stop().
Signed-off-by: Corey Minyard <cminyard@mvista.com>
It is possible in some situations that IPMI devices won't get started up
properly. This change makes it so all non-duplicate devices will get
started up.
Signed-off-by: Corey Minyard <cminyard@mvista.com>
This makes sure any outstanding messages are returned to the user before
the interface is cleaned up.
Signed-off-by: Corey Minyard <cminyard@mvista.com>
The lower level interface shouldn't attempt to unregister if it has a
callback in the pending queue.
Signed-off-by: Corey Minyard <cminyard@mvista.com>
Messages already have a refcount for the user, so there's no need to
account for a new one.
As part of this, grab a refcount to the interface when processing
received messages. The messages can be freed there, cause the user
then the interface to be freed.
Signed-off-by: Corey Minyard <cminyard@mvista.com>
Now that SRCU is gone from IPMI, it can no longer be sloppy about
locking. Use the users mutex now when sending a message, not the big
ipmi_interfaces mutex, because it can result in a recursive lock. The
users mutex will work because the interface destroy code claims it after
setting the interface in shutdown mode.
Also, due to the same changes, rework the refcounting on users and
interfaces. Remove the refcount to an interface when the user is
freed, not when it is destroyed. If the interface is destroyed
while the user still exists, the user will still point to the
interface to test that it is valid if the user tries to do anything
but delete the user.
Signed-off-by: Corey Minyard <cminyard@mvista.com>
Now that the msghandler does all callbacks in user threads, there is
no need to have a lock any more, a mutex will work fine.
Signed-off-by: Corey Minyard <cminyard@mvista.com>
This simplifies the locking and lets us remove some weird event
handling code. deliver_response() and friends can now be called
from an atomic context.
Signed-off-by: Corey Minyard <cminyard@mvista.com>
Andy reported:
Debian clang version 19.1.7 is not happy when compiled with
`make W=1` (note, CONFIG_WERROR=y is the default):
ipmi_si_platform.c:268:15: error: cast to smaller integer type 'enum si_type' from 'const void *' [-Werror,-Wvoid-pointer-to-enum-cast]
268 | io.si_type = (enum si_type)device_get_match_data(&pdev->dev);
The IPMI SI type is an enum that was cast into a pointer that was
then cast into an enum again. That's not the greatest style, so
instead create an info structure to hold the data and use that.
Reported-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Closes: https://lore.kernel.org/lkml/20250415085156.446430-1-andriy.shevchenko@linux.intel.com/
Suggested-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Tested-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Corey Minyard <corey@minyard.net>
Set the s3/s0ix and s4 flags in the pm notifier so that we can skip
the resource evictions properly in pm prepare based on whether
we are suspending or hibernating. Drop the eviction as processes
are not frozen at this time, we we can end up getting stuck trying
to evict VRAM while applications continue to submit work which
causes the buffers to get pulled back into VRAM.
v2: Move suspend flags out of pm notifier (Mario)
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/4178
Fixes: 2965e6355d ("drm/amd: Add Suspend/Hibernate notification callback support")
Cc: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 06f2dcc241)
Cc: stable@vger.kernel.org
This reverts commit 3a9626c816.
This breaks S4 because we end up setting the s3/s0ix flags
even when we are entering s4 since prepare is used by both
flows. The causes both the S3/s0ix and s4 flags to be set
which breaks several checks in the driver which assume they
are mutually exclusive.
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3634
Cc: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit ce8f7d9589)
Cc: stable@vger.kernel.org
VCN1_AON_SOC_ADDRESS_3_0 offset varies on different
VCN generations, the issue in vcn4.0.5 is caused by
a different VCN1_AON_SOC_ADDRESS_3_0 offset.
This patch does the following:
1. use the same offset for other VCN generations.
2. use the vcn4.0.5 special offset
3. update vcn_4_0 and vcn_5_0
Acked-by: Saleemkhan Jamadar <saleemkhan.jamadar@amd.com>
Reviewed-by: Leo Liu <leo.liu@amd.com>
Signed-off-by: Ruijing Dong <ruijing.dong@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 5c89ceda99)
Cc: stable@vger.kernel.org
[Why]
We incorrectly ack all bytes get written when the reply actually is defer.
When it's defer, means sink is not ready for the request. We should
retry the request.
[How]
Only reply all data get written when receive I2C_ACK|AUX_ACK. Otherwise,
reply the number of actual written bytes received from the sink.
Add some messages to facilitate debugging as well.
Fixes: ad6756b4d7 ("drm/amd/display: Shift dc link aux to aux_payload")
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Ray Wu <ray.wu@amd.com>
Signed-off-by: Wayne Lin <Wayne.Lin@amd.com>
Signed-off-by: Ray Wu <ray.wu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 3637e457eb)
Cc: stable@vger.kernel.org
