[Why]
amdgpu_dm_process_dmub_aux_transfer_sync() should return all exact data
reply from the sink side. Don't do the analysis job in it.
[How]
Remove unnecessary check condition AUX_TRANSACTION_REPLY_AUX_ACK.
Fixes: ead08b95fa ("drm/amd/display: Fix race condition in DPIA AUX transfer")
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Ray Wu <ray.wu@amd.com>
Signed-off-by: Wayne Lin <Wayne.Lin@amd.com>
Signed-off-by: Ray Wu <ray.wu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 9b540e3fe6)
Cc: stable@vger.kernel.org
[Why & How]
"Request length != reply length" is expected behavior defined in spec.
It's not an invalid reply. Besides, replied data handling logic is not
designed to be written in amdgpu_dm_process_dmub_aux_transfer_sync().
Remove the incorrectly handling section.
Fixes: ead08b95fa ("drm/amd/display: Fix race condition in DPIA AUX transfer")
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Ray Wu <ray.wu@amd.com>
Signed-off-by: Wayne Lin <Wayne.Lin@amd.com>
Signed-off-by: Ray Wu <ray.wu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 81b5c6fa62)
Cc: stable@vger.kernel.org
[Why & How]
Fix the checking condition for detecting AUX_RET_ERROR_PROTOCOL_ERROR.
It was wrongly checking by "not equals to"
Reviewed-by: Ray Wu <ray.wu@amd.com>
Signed-off-by: Wayne Lin <Wayne.Lin@amd.com>
Signed-off-by: Ray Wu <ray.wu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 1db6c9e9b6)
Cc: stable@vger.kernel.org
[Why]
Defined value of dmub AUX reply command field get updated but didn't
adjust dm receiving side accordingly.
[How]
Check the received reply command value to see if it's updated version
or not. Adjust it if necessary.
Fixes: ead08b95fa ("drm/amd/display: Fix race condition in DPIA AUX transfer")
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Ray Wu <ray.wu@amd.com>
Signed-off-by: Wayne Lin <Wayne.Lin@amd.com>
Signed-off-by: Ray Wu <ray.wu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit d5c9ade755)
Cc: stable@vger.kernel.org
[Why]
Memory allocation occurs within dml21_validate() for adding phantom planes.
May cause kernel to be tainted due to usage of FP Start.
[How]
Move FP start from dml21_validate to before mode programming/mode support.
Calculations requiring floating point are all done within mode programming
or mode support.
Reviewed-by: Alvin Lee <alvin.lee2@amd.com>
Signed-off-by: Austin Zheng <Austin.Zheng@amd.com>
Signed-off-by: Ray Wu <ray.wu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit fe3250f108)
[WHY & HOW]
Remove the unnecessary DC_FP_START/DC_FP_END pair to reduce time in
preempt_disable. It also fixes "BUG: sleeping function called from
invalid context" error messages because of calling kzalloc with
GFP_KERNEL which can sleep.
Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Ray Wu <ray.wu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 94da0735b6)
[Why]
FAMS2 expects vmin/vmax to be updated in the case when freesync is
off, but supported. But we only update it when freesync is enabled.
[How]
Change the vsync handler such that dc_stream_adjust_vmin_vmax() its called
irrespective of whether freesync is enabled. If freesync is supported,
then there is no harm in updating vmin/vmax registers.
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3546
Reviewed-by: ChiaHsuan Chung <chiahsuan.chung@amd.com>
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Ray Wu <ray.wu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit cfb2d41831)
Cc: stable@vger.kernel.org
[Why]
"BUG: sleeping function called from invalid context" error.
after:
"drm/amd/display: Protect FPU in dml2_validate()/dml21_validate()"
The populate_dml_plane_cfg_from_plane_state() uses the GFP_KERNEL flag
for memory allocation, which shouldn't be used in atomic contexts.
The allocation is needed only for using another helper function
get_scaler_data_for_plane().
[How]
Modify helpers to pass a pointer to scaler_data within existing context,
eliminating the need for dynamic memory allocation/deallocation
and copying.
Fixes: 366e77cd49 ("drm/amd/display: Protect FPU in dml2_validate()/dml21_validate()")
Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Roman Li <Roman.Li@amd.com>
Signed-off-by: Ray Wu <ray.wu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit bd3e84bc98)
Cc: stable@vger.kernel.org
Region locking introduced in v5.6-rc4 contained three macros to handle
the region locks: ahash_bucket_start(), ahash_bucket_end() which gave
back the start and end hash bucket values belonging to a given region
lock and ahash_region() which should give back the region lock belonging
to a given hash bucket. The latter was incorrect which can lead to a
race condition between the garbage collector and adding new elements
when a hash type of set is defined with timeouts.
Fixes: f66ee0410b ("netfilter: ipset: Fix "INFO: rcu detected stall in hash_xxx" reports")
Reported-by: Kota Toda <kota.toda@gmo-cybersecurity.com>
Signed-off-by: Jozsef Kadlecsik <kadlec@netfilter.org>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Enable InterTouch mode on TUXEDO InfinityBook Pro 14 v5 by adding
"SYN1221" to the list of SMBus-enabled variants.
Add support for InterTouch on SYN1221 by adding it to the list of
SMBus-enabled variants.
Reported-by: Matthias Eilert <kernel.hias@eilert.tech>
Tested-by: Matthias Eilert <kernel.hias@eilert.tech>
Signed-off-by: Aditya Garg <gargaditya08@live.com>
Link: https://lore.kernel.org/r/PN3PR01MB9597C033C4BC20EE2A0C4543B888A@PN3PR01MB9597.INDPRD01.PROD.OUTLOOK.COM
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
[ 5.989588] psmouse serio1: synaptics: Your touchpad (PNP: TOS0213 PNP0f03) says it can support a different bus. If i2c-hid and hid-rmi are not used, you might want to try setting psmouse.synaptics_intertouch to 1 and report this to linux-input@vger.kernel.org.
[ 6.039923] psmouse serio1: synaptics: Touchpad model: 1, fw: 9.32, id: 0x1e2a1, caps: 0xf00223/0x840300/0x12e800/0x52d884, board id: 3322, fw id: 2658004
The board is labelled TM3322.
Present on the Toshiba / Dynabook Portege X30-D and possibly others.
Confirmed working well with psmouse.synaptics_intertouch=1 and local build.
Signed-off-by: Manuel Fombuena <fombuena@outlook.com>
Signed-off-by: Aditya Garg <gargaditya08@live.com>
Link: https://lore.kernel.org/r/PN3PR01MB9597711E7933A08389FEC31DB888A@PN3PR01MB9597.INDPRD01.PROD.OUTLOOK.COM
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
If there is a problem requiring a reset of the VCN engine, it is better to
reset the VCN engine rather than the entire GPU.
Add a reset callback for the ring which will stop and start VCN if an
issue happens.
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Link: https://lore.kernel.org/r/20250506204948.12048-4-mario.limonciello@amd.com
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
If there is a problem requiring a reset of the VCN engine, it is better to
reset the VCN engine rather than the entire GPU.
Add a reset callback for the ring which will stop and start VCN if an
issue happens.
Link: https://lore.kernel.org/r/20250506204948.12048-3-mario.limonciello@amd.com
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
There is a problem occurring on VCN 4.0.5 where in some situations a job
is timing out. This triggers a job timeout which then causes a GPU
reset for recovery. That has exposed a number of issues with GPU reset
that have since been fixed. But also a GPU reset isn't actually needed
for this circumstance. Just restarting the ring is enough.
Add a reset callback for the ring which will stop and start VCN if the
issue happens.
Link: https://gitlab.freedesktop.org/mesa/mesa/-/issues/12528
Link: https://gitlab.freedesktop.org/drm/amd/-/issues/3909
Link: https://lore.kernel.org/r/20250506204948.12048-2-mario.limonciello@amd.com
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This reverts commit 18a878fd8a.
Revert this temporarily to make it easier to fix a regression
in the HDP handling.
Reviewed-by: Felix Kuehling <felix.kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
smu_v13_0_display_clock_voltage_request() and
smu_v13_0_set_min_deep_sleep_dcefclk() were added in 2020 by
commit c05d1c4015 ("drm/amd/swsmu: add aldebaran smu13 ip support (v3)")
but have remained unused.
Remove them.
smu_v13_0_display_clock_voltage_request() was the only user
of smu_v13_0_set_hard_freq_limited_range(). Remove it.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The last use of smu_v11_0_get_dpm_level_range() was removed in 2020 by
commit 46a301e14e ("drm/amd/powerplay: drop unnecessary Navi1x specific
APIs")
Remove it.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
smu7_copy_bytes_from_smc() was added in 2016 by
commit 1ff55f4651 ("drm/amd/powerplay: implement smu7_smumgr for asics
with smu ip version 7.")
but never used.
Remove it.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Since secure firmware is more stable than bring up phase, I believe we
don't need such mdelays any more before wait PSP response on PSP v12.
Signed-off-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Trigger Huang <Trigger.Huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
If applications unmap the memory before destroying the userptr, it needs
trigger a segfault to notify user space to correct the free sequence in
VM debug mode.
v2: Send gpu access fault to user space
v3: Report gpu address to user space, remove unnecessary params
v4: update pr_err into one line, remove userptr log info
Signed-off-by: Shane Xiao <shane.xiao@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
In VM debug mode, it is desirable to notify the application
to correct the freeing sequence by unmapping the memory before
destroying the userptr in the old userptr path. Add a bitmask
to decide whether to send gpu vm fault to the applition.
Signed-off-by: Shane Xiao <shane.xiao@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
It requires unlocking the reserved gem BO before returning from
attaching the eviction fence error.
Signed-off-by: Prike Liang <Prike.Liang@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The driver doesn't want to implicitly sync on the DMA_RESV_USAGE_BOOKKEEP
usage fences, and the BOOKEEP fences should be synced explicitly. So, as
the VM implicit syncing only need to return and sync the dependent read
fences.
Signed-off-by: Prike Liang <Prike.Liang@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This is an optional TA which is only available on
certain embedded systems. Mark it as optional to avoid
user confusion. This mirrors what we already do for
other optional TAs.
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/4181
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Set the s3/s0ix and s4 flags in the pm notifier so that we can skip
the resource evictions properly in pm prepare based on whether
we are suspending or hibernating. Drop the eviction as processes
are not frozen at this time, we we can end up getting stuck trying
to evict VRAM while applications continue to submit work which
causes the buffers to get pulled back into VRAM.
v2: Move suspend flags out of pm notifier (Mario)
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/4178
Fixes: 2965e6355d ("drm/amd: Add Suspend/Hibernate notification callback support")
Cc: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This notification may arrive in VF mailbox while polling for response from
another event.
This patches covers the following scenarios:
- If VF is already in RMA state, then do not attempt to contact the host.
Host will ignore the VF after sending the notification.
- If the notification is detected during polling, then set the RMA status,
and return error to caller.
- If the notification arrives by interrupt, then set the RMA status and
queue a reset. This reset will fail and VF will stop runtime services.
Reviewed-by: Shravan Kumar Gande <Shravankumar.Gande@amd.com>
Signed-off-by: Victor Skvortsov <victor.skvortsov@amd.com>
Signed-off-by: Ellen Pan <yunru.pan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Host may stop runtime services after reaching a bad page threshold.
This notification will indicate to the VF that it no longer has
access to the GPU.
Reviewed-by: Shravan Kumar Gande <Shravankumar.Gande@amd.com>
Signed-off-by: Victor Skvortsov <victor.skvortsov@amd.com>
Signed-off-by: Ellen Pan <yunru.pan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This reverts commit 3a9626c816.
This breaks S4 because we end up setting the s3/s0ix flags
even when we are entering s4 since prepare is used by both
flows. The causes both the S3/s0ix and s4 flags to be set
which breaks several checks in the driver which assume they
are mutually exclusive.
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3634
Cc: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
VCN1_AON_SOC_ADDRESS_3_0 offset varies on different
VCN generations, the issue in vcn4.0.5 is caused by
a different VCN1_AON_SOC_ADDRESS_3_0 offset.
This patch does the following:
1. use the same offset for other VCN generations.
2. use the vcn4.0.5 special offset
3. update vcn_4_0 and vcn_5_0
Acked-by: Saleemkhan Jamadar <saleemkhan.jamadar@amd.com>
Reviewed-by: Leo Liu <leo.liu@amd.com>
Signed-off-by: Ruijing Dong <ruijing.dong@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The dma_resv_add_fence() already refers to the added fence.
So when attaching the evciton fence to the gem bo, it needn't
refer to it anymore.
Signed-off-by: Prike Liang <Prike.Liang@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Host will send a notification when new bad pages are available.
Uopn guest request, the first 256 bad page addresses
will be placed into the PF2VF region.
Guest should pause the PF2VF worker thread while
the copy is in progress.
Reviewed-by: Shravan Kumar Gande <Shravankumar.Gande@amd.com>
Signed-off-by: Victor Skvortsov <victor.skvortsov@amd.com>
Signed-off-by: Ellen Pan <yunru.pan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Currently VFs rely on poison consumption interrupt from HW
to kick off the bad page retirement process. Part of this process
includes a VF reset.
This patch adds the following:
1) Host Bad Pages notification message.
2) Guest request bad pages message.
When combined, VFs are able to reserve the pages early, and potentially
avoid future poison consumption that will disrupt user services
from consequent FLR.
Reviewed-by: Shravan Kumar Gande <Shravankumar.Gande@amd.com>
Signed-off-by: Victor Skvortsov <victor.skvortsov@amd.com>
Signed-off-by: Ellen Pan <yunru.pan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add some random documentation associated with the ring buffer
manipulations and writeback.
Signed-off-by: Rodrigo Siqueira <siqueira@igalia.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
SDMA doesn't support oversubsciption, it is the user matter to create
queues over HW limit, but not supposed to be a KFD error.
Signed-off-by: Eric Huang <jinhuieric.huang@amd.com>
Reviewed-by: Harish Kasiviswanathan <Harish.Kasiviswanathan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
We check for a NULL divisor but don't act on it.
This check does nothing other than throw a warning.
It does confuse static checkers though:
See https://lkml.org/lkml/2025/4/26/371
[How]
Drop the ASSERTs in both DC and SPL variants.
Fixes: 4562236b3b ("drm/amd/dc: Add dc display driver (v2)")
Fixes: 6efc0ab3b0 ("drm/amd/display: add back quality EASF and ISHARP and dc dependency changes")
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Leo Li <sunpeng.li@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Replace 0 and 1 with false and true for boolean variables in
dml2_core_dcn4_calcs.c and dml2_core_utils.c to align with the Linux
kernel coding style guidelines, which recommend using C99 bool type
with true/false values.
Signed-off-by: Ivan Shamliev <ivan.shamliev.dev@abv.bg>
Reviewed-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Adds kernel-doc for externally linked dc_stream_remove_writeback function.
Signed-off-by: James Flowers <bold.zone2373@fastmail.com>
Reviewed-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Newer versions of glibc include a definition of struct sched_attr in
bits/sched.h (included through sched.h which is included by rtla).
Commit 0eecee3406 ("tools/rtla: fix collision with glibc
sched_attr/sched_set_attr") has modified the definition of struct
sched_attr in utils.h, so that it is only applied with older versions of
glibc that do not define it, in order to prevent build failure.
The definition in bits/sched.h depends on _GNU_SOURCE.
timerlat_bpf.c does not define _GNU_SOURCE, making it fall back to the
definition in utils.h. The latter has two fields less, leading to
shifted offsets of struct timerlat_params in timerlat_bpf_init.
Because of the shift, timerlat_bpf_init incorrectly reads
params->entries as 0 for timerlat-hist and disables the creation of
histogram maps, causing breakage in BPF sample collection mode:
$ rtla timerlat hist -d 1s
Error pulling BPF data
Fix the issue by also defining _GNU_SOURCE in timerlat_bpf.c.
Cc: John Kacur <jkacur@redhat.com>
Cc: Luis Goncalves <lgoncalv@redhat.com>
Link: https://lore.kernel.org/20250430144651.621766-1-tglozar@redhat.com
Fixes: e34293ddce ("rtla/timerlat: Add BPF skeleton to collect samples")
Signed-off-by: Tomas Glozar <tglozar@redhat.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Introduce a mount option to allow sysadmins to specify the maximum size
of an atomic write. If the filesystem can work with the supplied value,
that becomes the new guaranteed maximum.
The value mustn't be too big for the existing filesystem geometry (max
write size, max AG/rtgroup size). We dynamically recompute the
tr_atomic_write transaction reservation based on the given block size,
check that the current log size isn't less than the new minimum log size
constraints, and set a new maximum.
The actual software atomic write max is still computed based off of
tr_atomic_ioend the same way it has for the past few commits. Note also
that xfs_calc_atomic_write_log_geometry is non-static because mkfs will
need that.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: John Garry <john.g.garry@oracle.com>
Reviewed-by: John Garry <john.g.garry@oracle.com>
Update the limits returned from xfs_get_atomic_write_{min, max, max_opt)().
No reflink support always means no CoW-based atomic writes.
For updating xfs_get_atomic_write_min(), we support blocksize only and that
depends on HW or reflink support.
For updating xfs_get_atomic_write_max(), for no reflink, we are limited to
blocksize but only if HW support. Otherwise we are limited to combined
limit in mp->m_atomic_write_unit_max.
For updating xfs_get_atomic_write_max_opt(), ultimately we are limited by
the bdev atomic write limit. If xfs_get_atomic_write_max() does not report
> 1x blocksize, then just continue to report 0 as before.
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
[djwong: update comments in the helper functions]
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: John Garry <john.g.garry@oracle.com>
Now that CoW-based atomic writes are supported, update the max size of an
atomic write for the data device.
The limit of a CoW-based atomic write will be the limit of the number of
logitems which can fit into a single transaction.
In addition, the max atomic write size needs to be aligned to the agsize.
Limit the size of atomic writes to the greatest power-of-two factor of the
agsize so that allocations for an atomic write will always be aligned
compatibly with the alignment requirements of the storage.
Function xfs_atomic_write_logitems() is added to find the limit the number
of log items which can fit in a single transaction.
Amend the max atomic write computation to create a new transaction
reservation type, and compute the maximum size of an atomic write
completion (in fsblocks) based on this new transaction reservation.
Initially, tr_atomic_write is a clone of tr_itruncate, which provides a
reasonable level of parallelism. In the next patch, we'll add a mount
option so that sysadmins can configure their own limits.
[djwong: use a new reservation type for atomic write ioends, refactor
group limit calculations]
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
[jpg: rounddown power-of-2 always]
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: John Garry <john.g.garry@oracle.com>
Add xfs_file_dio_write_atomic() for dedicated handling of atomic writes.
Now HW offload will not be required to support atomic writes and is
an optional feature.
CoW-based atomic writes will be supported with out-of-places write and
atomic extent remapping.
Either mode of operation may be used for an atomic write, depending on the
circumstances.
The preferred method is HW offload as it will be faster. If HW offload is
not available then we always use the CoW-based method. If HW offload is
available but not possible to use, then again we use the CoW-based method.
If available, HW offload would not be possible for the write length
exceeding the HW offload limit, the write spanning multiple extents,
unaligned disk blocks, etc.
Apart from the write exceeding the HW offload limit, other conditions for
HW offload usage can only be detected in the iomap handling for the write.
As such, we use a fallback method to issue the write if we detect in the
->iomap_begin() handler that HW offload is not possible. Special code
-ENOPROTOOPT is returned from ->iomap_begin() to inform that HW offload is
not possible.
In other words, atomic writes are supported on any filesystem that can
perform out of place write remapping atomically (i.e. reflink) up to
some fairly large size. If the conditions are right (a single correctly
aligned overwrite mapping) then the filesystem will use any available
hardware support to avoid the filesystem metadata updates.
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: John Garry <john.g.garry@oracle.com>
When completing a CoW-based write, each extent range mapping update is
covered by a separate transaction.
For a CoW-based atomic write, all mappings must be changed at once, so
change to use a single transaction.
Note that there is a limit on the amount of log intent items which can be
fit into a single transaction, but this is being ignored for now since
the count of items for a typical atomic write would be much less than is
typically supported. A typical atomic write would be expected to be 64KB
or less, which means only 16 possible extents unmaps, which is quite
small.
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
[djwong: add tr_atomic_ioend]
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: John Garry <john.g.garry@oracle.com>
