For when large atomic writes (> 1x FS block) are supported, there will be
various occasions when HW offload may not be possible.
Such instances include:
- unaligned extent mapping wrt write length
- extent mappings which do not cover the full write, e.g. the write spans
sparse or mixed-mapping extents
- the write length is greater than HW offload can support
- no hardware support at all
In those cases, we need to fallback to the CoW-based atomic write mode. For
this, report special code -ENOPROTOOPT to inform the caller that HW
offload-based method is not possible.
In addition to the occasions mentioned, if the write covers an unallocated
range, we again judge that we need to rely on the CoW-based method when we
would need to allocate anything more than 1x block. This is because if we
allocate less blocks that is required for the write, then again HW
offload-based method would not be possible. So we are taking a pessimistic
approach to writes covering unallocated space.
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
[djwong: various cleanups]
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: John Garry <john.g.garry@oracle.com>
For CoW-based atomic writes, reuse the infrastructure for reflink CoW fork
support.
Add ->iomap_begin() callback xfs_atomic_write_cow_iomap_begin() to create
staging mappings in the CoW fork for atomic write updates.
The general steps in the function are as follows:
- find extent mapping in the CoW fork for the FS block range being written
- if part or full extent is found, proceed to process found extent
- if no extent found, map in new blocks to the CoW fork
- convert unwritten blocks in extent if required
- update iomap extent mapping and return
The bulk of this function is quite similar to the processing in
xfs_reflink_allocate_cow(), where we try to find an extent mapping; if
none exists, then allocate a new extent in the CoW fork, convert unwritten
blocks, and return a mapping.
Performance testing has shown the XFS_ILOCK_EXCL locking to be quite
a bottleneck, so this is an area which could be optimised in future.
Christoph Hellwig contributed almost all of the code in
xfs_atomic_write_cow_iomap_begin().
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
[djwong: add a new xfs_can_sw_atomic_write to convey intent better]
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: John Garry <john.g.garry@oracle.com>
Currently the size of atomic write allowed is fixed at the blocksize.
To start to lift this restriction, partly refactor
xfs_report_atomic_write() to into helpers -
xfs_get_atomic_write_{min, max}() - and use those helpers to find the
per-inode atomic write limits and check according to that.
Also add xfs_get_atomic_write_max_opt() to return the optimal limit, and
just return 0 since large atomics aren't supported yet.
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: John Garry <john.g.garry@oracle.com>
Refactor xfs_reflink_end_cow_extent() into separate parts which process
the CoW range and commit the transaction.
This refactoring will be used in future for when it is required to commit
a range of extents as a single transaction, similar to how it was done
pre-commit d6f215f359.
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: John Garry <john.g.garry@oracle.com>
Add a BMAPI flag to provide a hint to the block allocator to align extents
according to the extszhint.
This will be useful for atomic writes to ensure that we are not being
allocated extents which are not suitable (for atomic writes).
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: John Garry <john.g.garry@oracle.com>
Currently only HW which can write at least 1x block is supported.
For supporting atomic writes > 1x block, a CoW-based method will also be
used and this will not be resticted to using HW which can write >= 1x
block.
However for deciding if HW-based atomic writes can be used, we need to
start adding checks for write length < HW min, which complicates the
code. Indeed, a statx field similar to unit_max_opt should also be
added for this minimum, which is undesirable.
HW which can only write > 1x blocks would be uncommon and quite weird,
so let's just not support it.
Signed-off-by: "Darrick J. Wong" <djwong@kernel.org>
Signed-off-by: John Garry <john.g.garry@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
In the transaction reservation code, hoist the logic that computes the
reservation needed to finish one log intent item into separate helper
functions. These will be used in subsequent patches to estimate the
number of blocks that an online repair can commit to reaping in the same
transaction as the change committing the new data structure.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: John Garry <john.g.garry@oracle.com>
Signed-off-by: John Garry <john.g.garry@oracle.com>
Add selected helpers to estimate the transaction reservation required to
write various log intent and buffer items to the log. These helpers
will be used by the online repair code for more precise estimations of
how much work can be done in a single transaction.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: John Garry <john.g.garry@oracle.com>
Signed-off-by: John Garry <john.g.garry@oracle.com>
Separate out setting buftarg atomic writes limits into a dedicated
function, xfs_configure_buftarg_atomic_writes(), to keep the specific
functionality self-contained.
For naming consistency, rename xfs_setsize_buftarg() ->
xfs_configure_buftarg().
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
[jpg: separate out from patch "xfs: ignore HW which ..."]
Signed-off-by: John Garry <john.g.garry@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
In future we will want to be able to check if specifically HW offload-based
atomic writes are possible, so rename xfs_inode_can_atomicwrite() ->
xfs_inode_can_hw_atomicwrite().
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
[djwong: add an underscore to be consistent with everything else]
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: John Garry <john.g.garry@oracle.com>
It's silly to call xfs_setsize_buftarg from xfs_alloc_buftarg with the
block device LBA size because we don't need to ask the block layer to
validate a geometry number that it provided us. Instead, set the
preliminary bt_meta_sector* fields to the LBA size in preparation for
reading the primary super.
However, we still want to flush and invalidate the pagecache for all
three block devices before we start reading metadata from those devices,
so call sync_blockdev() per bdev in xfs_alloc_buftarg().
This will enable a subsequent patch to validate hw atomic write geometry
against the filesystem geometry.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: John Garry <john.g.garry@oracle.com>
[jpg: call sync_blockdev() from xfs_alloc_buftarg()]
Signed-off-by: John Garry <john.g.garry@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
XFS will be able to support large atomic writes (atomic write > 1x block)
in future. This will be achieved by using different operating methods,
depending on the size of the write.
Specifically a new method of operation based in FS atomic extent remapping
will be supported in addition to the current HW offload-based method.
The FS method will generally be appreciably slower performing than the
HW-offload method. However the FS method will be typically able to
contribute to achieving a larger atomic write unit max limit.
XFS will support a hybrid mode, where HW offload method will be used when
possible, i.e. HW offload is used when the length of the write is
supported, and for other times FS-based atomic writes will be used.
As such, there is an atomic write length at which the user may experience
appreciably slower performance.
Advertise this limit in a new statx field, stx_atomic_write_unit_max_opt.
When zero, it means that there is no such performance boundary.
Masks STATX{_ATTR}_WRITE_ATOMIC can be used to get this new field. This is
ok for older kernels which don't support this new field, as they would
report 0 in this field (from zeroing in cp_statx()) already. Furthermore
those older kernels don't support large atomic writes - apart from block
fops, but there would be consistent performance there for atomic writes
in range [unit min, unit max].
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Acked-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: John Garry <john.g.garry@oracle.com>
We frequently use 'bcachefs list_journal -a' for debugging, as it
provides a record of all btree transactions, and a history of what
happened.
But it's not so useful if we immediately discard journal buckets right
after they're no longer dirty.
This tweaks journal reclaim to only discard when we're low on space,
keeping the journal mostly un-discarded.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
When we go emergency read-only, make sure we do a final write_super() to
persist counters and error counts - this can be critical for piecing
together what fsck was doing.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
We often filter out EROFS errors to avoid log spew after an emergency
shutdown - journal_shutdown is just another emergency shutdown error.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
When executing "make -C tools/tracing/rtla" on LoongArch, there exists
the following error:
src/utils.c:237:24: error: '__NR_sched_setattr' undeclared
Just define __NR_sched_setattr for LoongArch if not exist.
Link: https://lore.kernel.org/20250422074917.25771-1-yangtiezhu@loongson.cn
Reported-by: Haiyong Sun <sunhaiyong@loongson.cn>
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
A pre-existing valid cfid returned from find_or_create_cached_dir might
race with a lease break, meaning open_cached_dir doesn't consider it
valid, and thinks it's newly-constructed. This leaks a dentry reference
if the allocation occurs before the queued lease break work runs.
Avoid the race by extending holding the cfid_list_lock across
find_or_create_cached_dir and when the result is checked.
Cc: stable@vger.kernel.org
Reviewed-by: Henrique Carvalho <henrique.carvalho@suse.com>
Signed-off-by: Paul Aurich <paul@darkrain42.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Intel hybrid processors have CPUs of different capacity. Populate the
interface /sys/devices/system/cpu/cpuN/cpu_capacity.
This interface uses the per-CPU variable `cpu_scale`. On x86 this
variable has no other use besides feeding the sysfs entries. Initialize
it when setting CPU capacity for the scheduler and scale-invariant code.
Feed it with arch_scale_cpu_capacity() as it gives capacity normalized
to the interval [0, SCHED_CAPACITY_SCALE].
Signed-off-by: Ricardo Neri <ricardo.neri-calderon@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
arch_topology.c provides functionality to parse and scale CPU capacity.
It also provides a corresponding sysfs interface. Some architectures
parse and scale CPU capacity differently as per their own needs. On
Intel processors, for instance, it is responsibility of the Intel
P-state driver.
Relocate the implementation of that interface to a common location in
topology.c. Architectures can use the interface and populate it using
their own mechanisms.
An alternative approach would be to compile arch_topology.c even if
not needed only to get this interface. This approach would create
duplicated and conflicting functionality and data structures.
Signed-off-by: Ricardo Neri <ricardo.neri-calderon@linux.intel.com>
Tested-by: Christian Loehle <christian.loehle@arm.com>
Link: https://patch.msgid.link/20250419025504.9760-2-ricardo.neri-calderon@linux.intel.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
A test is considered failed when a sample trace exceeds the threshold.
Failed tests return the same exit code as passed tests, requiring test
frameworks to determine the result by searching for "hit stop tracing"
in the output.
Assign a distinct exit code for failed tests to enable the use of shell
expressions and seamless integration with testing frameworks without the
need to parse output.
Add enum type for return value.
Update `make check`.
Cc: Daniel Bristot de Oliveira <bristot@kernel.org>
Cc: John Kacur <jkacur@redhat.com>
Cc: "Luis Claudio R. Goncalves" <lgoncalv@redhat.com>
Cc: Eder Zulian <ezulian@redhat.com>
Cc: Dan Carpenter <dan.carpenter@linaro.org>
Cc: Jan Stancek <jstancek@redhat.com>
Link: https://lore.kernel.org/20250417185757.2194541-1-costa.shul@redhat.com
Signed-off-by: Costa Shulyupin <costa.shul@redhat.com>
Reviewed-by: Tomas Glozar <tglozar@redhat.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Platform Temperature Control is a dynamic control loop implemented in
hardware to manage the skin or any board temperature of a device. The
reported skin or board temperature is controlled by comparing to a
configured target temperature and adjusting the SoC (System on Chip)
performance accordingly. The feature supports up to three platform
sensors.
OEMs (Original Equipment Manufacturers) can configure this feature
through the BIOS and provide temperature input directly to the hardware
via the Platform Environment Control Interface (PECI). As a result,
this feature can operate independently of any OS-level control.
The OS interface can be used to further fine-tune the default OEM
configuration. Here are some scenarios where the OS interface is
beneficial:
Verification of Firmware Control: Check if firmware-based control is
enabled. If it is, thermal controls from the OS/user space can be
backed out.
Adjusting Target Limits: While OEMs can set an aggressive target limit,
the OS can adjust this to a less aggressive limit based on operating
modes or conditions.
Given that this is platform temperature control, it is expected that a
single user-level manager owns and manages the controls. If multiple
user-level software applications attempt to write different targets, it
can lead to unexpected behavior. For instance, on a Linux desktop, the
Linux thermal daemon can manage these temperature controls, as it has
access to all other temperature control settings.
The hardware control interface is via MMIO offsets in the processor
thermal device MMIO space. There are three instances of MMIO registers.
Refer to the platform_temperature_control.c for MMIO details.
Expose "enable" and "temperature_target" via sysfs.
There are three instances of this controls. So up to three different
sensors can be controlled independently.
Sysfs interface:
tree /sys/bus/pci/devices/0000\:00\:04.0/ptc_?_control/
/sys/bus/pci/devices/0000:00:04.0/ptc_0_control/
├── enable
└── temperature_target
/sys/bus/pci/devices/0000:00:04.0/ptc_1_control/
├── enable
└── temperature_target
/sys/bus/pci/devices/0000:00:04.0/ptc_2_control/
├── enable
└── temperature_target
Description of attributes:
Enable: 1 for enable, 0 for disable. This attribute can be used to
read the current status. User space can write 0 or 1 to disable or
enable this feature respectively.
temperature_target: Target temperature limit to which hardware
will try to limit in milli degree C.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Link: https://patch.msgid.link/20250429000110.236243-2-srinivas.pandruvada@linux.intel.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Since xe_device_sysfs_init() exposes device specific attributes, a better
place for it is xe_device_probe().
Signed-off-by: Raag Jadav <raag.jadav@intel.com>
Reviewed-by: Riana Tauro <riana.tauro@intel.com>
Link: https://lore.kernel.org/r/20250506054835.3395220-2-raag.jadav@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
xe_force_wake_get() is dependent on xe_pm_runtime_get(), so for
the release path, xe_force_wake_put() should be called first then
xe_pm_runtime_put().
Combine the error path and normal path together with goto.
Fixes: 85d547608e ("drm/xe/xe_gt_debugfs: Update handling of xe_force_wake_get return")
Cc: Himal Prasad Ghimiray <himal.prasad.ghimiray@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Shuicheng Lin <shuicheng.lin@intel.com>
Reviewed-by: Himal Prasad Ghimiray <himal.prasad.ghimiray@intel.com>
Link: https://lore.kernel.org/r/20250507022302.2187527-1-shuicheng.lin@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Doing cpufreq-specific EAS checks that require accessing policy
internals directly from sched_is_eas_possible() is a bit unfortunate,
so introduce cpufreq_ready_for_eas() in cpufreq, move those checks
into that new function and make sched_is_eas_possible() call it.
While at it, address a possible race between the EAS governor check
and governor change by doing the former under the policy rwsem.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Christian Loehle <christian.loehle@arm.com>
Tested-by: Christian Loehle <christian.loehle@arm.com>
Reviewed-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
Link: https://patch.msgid.link/2317800.iZASKD2KPV@rjwysocki.net
Add a helper for checking if schedutil is the current governor for
a given cpufreq policy and use it in sched_is_eas_possible() to avoid
accessing cpufreq policy internals directly from there.
No intentional functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Christian Loehle <christian.loehle@arm.com>
Tested-by: Christian Loehle <christian.loehle@arm.com>
Reviewed-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
Link: https://patch.msgid.link/3365956.44csPzL39Z@rjwysocki.net
>From the documentation:
"offset to be added to <type>[Y]_raw prior toscaling by <type>[Y]_scale"
Offset should be applied before multiplying scale, so divide offset by
scale to make this correct.
Fixes: bc3eb0207f ("iio: imu: inv_icm42600: add temperature sensor support")
Signed-off-by: Sean Nyekjaer <sean@geanix.com>
Acked-by: Jean-Baptiste Maneyrol <jean-baptiste.maneyrol@tdk.com>
Link: https://patch.msgid.link/20250502-imu-v1-1-129b8391a4e3@geanix.com
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Fix bus read function.
Testing the driver, on a random basis, wrong reads was detected, mainly
by a wrong DAC chip ID read at first boot.
Before reading the expected value from the AXI regmap, need always to
wait for busy flag to be cleared.
Fixes: e61d717842 ("iio: dac: adi-axi-dac: extend features")
Signed-off-by: Angelo Dureghello <adureghello@baylibre.com>
Reviewed-by: Nuno Sá <nuno.sa@analog.com>
Link: https://patch.msgid.link/20250409-ad3552r-fix-bus-read-v2-1-34d3b21e8ca0@baylibre.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
In 'lookup_or_create_module_kobject()', an internal kobject is created
using 'module_ktype'. So call to 'kobject_put()' on error handling
path causes an attempt to use an uninitialized completion pointer in
'module_kobject_release()'. In this scenario, we just want to release
kobject without an extra synchronization required for a regular module
unloading process, so adding an extra check whether 'complete()' is
actually required makes 'kobject_put()' safe.
Reported-by: syzbot+7fb8a372e1f6add936dd@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=7fb8a372e1f6add936dd
Fixes: 942e443127 ("module: Fix mod->mkobj.kobj potentially freed too early")
Cc: stable@vger.kernel.org
Suggested-by: Petr Pavlu <petr.pavlu@suse.com>
Signed-off-by: Dmitry Antipov <dmantipov@yandex.ru>
Link: https://lore.kernel.org/r/20250507065044.86529-1-dmantipov@yandex.ru
Signed-off-by: Petr Pavlu <petr.pavlu@suse.com>
- Add a new reviewer, Hongbo Li, for better community development;
- Fix an I/O hang out of file-backed mounts;
- Address a rare data corruption caused by concurrent I/Os on the
same deduplicated compressed data;
- Minor cleanup.
-----BEGIN PGP SIGNATURE-----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=b+bQ
-----END PGP SIGNATURE-----
Merge tag 'erofs-for-6.15-rc6-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/xiang/erofs
Pull erofs fixes from Gao Xiang:
- Add a new reviewer, Hongbo Li, for better community development
- Fix an I/O hang out of file-backed mounts
- Address a rare data corruption caused by concurrent I/Os on the same
deduplicated compressed data
- Minor cleanup
* tag 'erofs-for-6.15-rc6-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/xiang/erofs:
erofs: ensure the extra temporary copy is valid for shortened bvecs
erofs: remove unused enum type
fs/erofs/fileio: call erofs_onlinefolio_split() after bio_add_folio()
MAINTAINERS: erofs: add myself as reviewer
The T-Head TH1520 SoC integrates a variety of clocks for its subsystems,
including the Application Processor (AP) and the Video Output (VO) [1].
Up until now, the T-Head clock driver only supported AP clocks.
Extend the driver to provide clock functionality for the VO subsystem.
At this stage, the focus is on implementing the VO clock gates, as these
are currently the most relevant and required components for enabling and
disabling the VO subsystem functionality. Future enhancements may
introduce additional VO-related clocks as necessary.
Link: https://openbeagle.org/beaglev-ahead/beaglev-ahead/-/blob/main/docs/TH1520%20System%20User%20Manual.pdf [1]
Reviewed-by: Drew Fustini <drew@pdp7.com>
Signed-off-by: Michal Wilczynski <m.wilczynski@samsung.com>
Signed-off-by: Drew Fustini <drew@pdp7.com>
Add device tree bindings for the TH1520 Video Output (VO) subsystem
clock controller. The VO sub-system manages clock gates for multimedia
components including HDMI, MIPI, and GPU.
Document the VIDEO_PLL requirements for the VO clock controller, which
receives its input from the AP clock controller. The VIDEO_PLL is a
Silicon Creations Sigma-Delta (integer) PLL typically running at 792 MHz
with maximum FOUTVCO of 2376 MHz.
This binding complements the existing AP sub-system clock controller
which manages CPU, DPU, GMAC and TEE PLLs.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Michal Wilczynski <m.wilczynski@samsung.com>
Reviewed-by: Drew Fustini <drew@pdp7.com>
Signed-off-by: Drew Fustini <drew@pdp7.com>
Device flags could be updated in the meantime while MGMT_OP_ADD_DEVICE
is pending on hci_update_passive_scan_sync so instead of setting the
current_flags as cmd->user_data just do a lookup using
hci_conn_params_lookup and use the latest stored flags.
Fixes: a182d9c84f ("Bluetooth: MGMT: Fix Add Device to responding before completing")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This adds a variant of Vec::insert that does not allocate memory. This
makes it safe to use this function while holding a spinlock. Rust Binder
uses it for the range allocator fast path.
Signed-off-by: Alice Ryhl <aliceryhl@google.com>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Benno Lossin <lossin@kernel.org>
Link: https://lore.kernel.org/r/20250502-vec-methods-v5-7-06d20ad9366f@google.com
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
This is needed by Rust Binder in the range allocator, and by upcoming
GPU drivers during firmware initialization.
Panics in the kernel are best avoided when possible, so an error is
returned if the index is out of bounds. An error type is used rather
than just returning Option<T> to let callers handle errors with ?.
Signed-off-by: Alice Ryhl <aliceryhl@google.com>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Benno Lossin <lossin@kernel.org>
Link: https://lore.kernel.org/r/20250502-vec-methods-v5-6-06d20ad9366f@google.com
[ Remove `# Panics` section; `Vec::remove() handles the error properly.`
- Danilo ]
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
This adds a common Vec method called `retain` that removes all elements
that don't match a certain condition. Rust Binder uses it to find all
processes that match a given pid.
The stdlib retain method takes &T rather than &mut T and has a separate
retain_mut for the &mut T case. However, this is considered an API
mistake that can't be fixed now due to backwards compatibility. There's
no reason for us to repeat that mistake.
Signed-off-by: Alice Ryhl <aliceryhl@google.com>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Benno Lossin <lossin@kernel.org>
Link: https://lore.kernel.org/r/20250502-vec-methods-v5-5-06d20ad9366f@google.com
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
Commit ad3dd9592b ("soc: qcom: pmic_glink: disable UCSI on sc8280xp")
disabled UCSI shortly after it had been enabled to fix a regression that
was observed on the Lenovo ThinkPad X13s.
Specifically, disconnecting an external display would trigger a system
error and hypervisor reset but no one cared enough to track down the bug
at the time.
The same issue was recently observed on X Elite machines, and commit
f47eba045e ("usb: typec: ucsi: Set orientation as none when connector
is unplugged") worked around the underlying issue by setting the
connector orientation to 'none' on disconnect events to avoid having the
PHY driver crash the machine in one orientation.
Enable UCSI support also on sc8280xp now that the DisplayPort disconnect
crashes are gone.
Cc: Abel Vesa <abel.vesa@linaro.org>
Cc: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Abel Vesa <abel.vesa@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250326124944.6338-1-johan+linaro@kernel.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
This is like the stdlib method drain, except that it's hard-coded to use
the entire vector's range. Rust Binder uses it in the range allocator to
take ownership of everything in a vector in a case where reusing the
vector is desirable.
Implementing `DrainAll` in terms of `slice::IterMut` lets us reuse some
nice optimizations in core for the case where T is a ZST.
Signed-off-by: Alice Ryhl <aliceryhl@google.com>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Benno Lossin <lossin@kernel.org>
Link: https://lore.kernel.org/r/20250502-vec-methods-v5-4-06d20ad9366f@google.com
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
This introduces a new method called `push_within_capacity` for appending
to a vector without attempting to allocate if the capacity is full. Rust
Binder will use this in various places to safely push to a vector while
holding a spinlock.
The implementation is moved to a push_within_capacity_unchecked method.
This is preferred over having push() call push_within_capacity()
followed by an unwrap_unchecked() for simpler unsafe.
Panics in the kernel are best avoided when possible, so an error is
returned if the vector does not have sufficient capacity. An error type
is used rather than just returning Result<(),T> to make it more
convenient for callers (i.e. they can use ? or unwrap).
Signed-off-by: Alice Ryhl <aliceryhl@google.com>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Benno Lossin <lossin@kernel.org>
Link: https://lore.kernel.org/r/20250502-vec-methods-v5-3-06d20ad9366f@google.com
[ Remove public visibility from `Vec::push_within_capacity_unchecked()`.
- Danilo ]
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
This introduces a basic method that our custom Vec is missing. I expect
that it will be used in many places, but at the time of writing, Rust
Binder has six calls to Vec::pop.
Signed-off-by: Alice Ryhl <aliceryhl@google.com>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Benno Lossin <lossin@kernel.org>
Link: https://lore.kernel.org/r/20250502-vec-methods-v5-2-06d20ad9366f@google.com
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
Our custom Vec type is missing the stdlib method `clear`, thus add it.
It will be used in the miscdevice sample.
Reviewed-by: Benno Lossin <benno.lossin@proton.me>
Reviewed-by: Tamir Duberstein <tamird@gmail.com>
Signed-off-by: Alice Ryhl <aliceryhl@google.com>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/20250502-vec-methods-v5-1-06d20ad9366f@google.com
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
copy_from_user() has more checks and is more safer than
__copy_from_user()
Suggested-by: Kees Cook <kees@kernel.org>
Signed-off-by: Harish Chegondi <harish.chegondi@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Signed-off-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Link: https://lore.kernel.org/r/acabf20aa8621c7bc8de09b1bffb8d14b5376484.1746126614.git.harish.chegondi@intel.com
To receive 428dc9fc08 ("sched_ext: bpf_iter_scx_dsq_new() should always
initialize iterator") which conflicts with cdf5a6faa8 ("sched_ext: Move
dsq_hash into scx_sched"). The conflict is a simple context conflict which
can be resolved by taking changes from both changes in the right order.
BPF programs may call next() and destroy() on BPF iterators even after new()
returns an error value (e.g. bpf_for_each() macro ignores error returns from
new()). bpf_iter_scx_dsq_new() could leave the iterator in an uninitialized
state after an error return causing bpf_iter_scx_dsq_next() to dereference
garbage data. Make bpf_iter_scx_dsq_new() always clear $kit->dsq so that
next() and destroy() become noops.
Signed-off-by: Tejun Heo <tj@kernel.org>
Fixes: 650ba21b13 ("sched_ext: Implement DSQ iterator")
Cc: stable@vger.kernel.org # v6.12+
Acked-by: Andrea Righi <arighi@nvidia.com>
