Commit graph

1,308,922 commits

Author SHA1 Message Date
Dmitry Baryshkov
7120d8a0d3 drm/msm/dpu: pull format flag definitions to mdp_format.h
In preparation to merger of formats databases, pull format flag
definitions to mdp_format.h header, so that they are visibile to both
dpu and mdp drivers.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/590425/
Link: https://lore.kernel.org/r/20240420-dpu-format-v2-4-9e93226cbffd@linaro.org
2024-04-23 12:56:29 +03:00
Dmitry Baryshkov
932733b89f drm/msm/dpu: in dpu_format replace bitmap with unsigned long field
Using bitmap for the flags results in a clumsy syntax on test_bit,
replace it with unsigned long type and simple binary ops.

Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/590422/
Link: https://lore.kernel.org/r/20240420-dpu-format-v2-3-9e93226cbffd@linaro.org
2024-04-23 12:56:29 +03:00
Dmitry Baryshkov
966c5deecf drm/msm: add arrays listing formats supported by MDP4/MDP5 hardware
MDP4 and MDP5 drivers enumerate supported formats each time the plane is
created. In preparation to merger of MDP DPU format databases, define
precise formats list, so that changes to the database do not cause the
driver to add unsupported format to the list.

Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/590421/
Link: https://lore.kernel.org/r/20240420-dpu-format-v2-2-9e93226cbffd@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2024-04-23 12:56:26 +03:00
Duoming Zhou
467324bcfe ax25: Fix netdev refcount issue
The dev_tracker is added to ax25_cb in ax25_bind(). When the
ax25 device is detaching, the dev_tracker of ax25_cb should be
deallocated in ax25_kill_by_device() instead of the dev_tracker
of ax25_dev. The log reported by ref_tracker is shown below:

[   80.884935] ref_tracker: reference already released.
[   80.885150] ref_tracker: allocated in:
[   80.885349]  ax25_dev_device_up+0x105/0x540
[   80.885730]  ax25_device_event+0xa4/0x420
[   80.885730]  notifier_call_chain+0xc9/0x1e0
[   80.885730]  __dev_notify_flags+0x138/0x280
[   80.885730]  dev_change_flags+0xd7/0x180
[   80.885730]  dev_ifsioc+0x6a9/0xa30
[   80.885730]  dev_ioctl+0x4d8/0xd90
[   80.885730]  sock_do_ioctl+0x1c2/0x2d0
[   80.885730]  sock_ioctl+0x38b/0x4f0
[   80.885730]  __se_sys_ioctl+0xad/0xf0
[   80.885730]  do_syscall_64+0xc4/0x1b0
[   80.885730]  entry_SYSCALL_64_after_hwframe+0x67/0x6f
[   80.885730] ref_tracker: freed in:
[   80.885730]  ax25_device_event+0x272/0x420
[   80.885730]  notifier_call_chain+0xc9/0x1e0
[   80.885730]  dev_close_many+0x272/0x370
[   80.885730]  unregister_netdevice_many_notify+0x3b5/0x1180
[   80.885730]  unregister_netdev+0xcf/0x120
[   80.885730]  sixpack_close+0x11f/0x1b0
[   80.885730]  tty_ldisc_kill+0xcb/0x190
[   80.885730]  tty_ldisc_hangup+0x338/0x3d0
[   80.885730]  __tty_hangup+0x504/0x740
[   80.885730]  tty_release+0x46e/0xd80
[   80.885730]  __fput+0x37f/0x770
[   80.885730]  __x64_sys_close+0x7b/0xb0
[   80.885730]  do_syscall_64+0xc4/0x1b0
[   80.885730]  entry_SYSCALL_64_after_hwframe+0x67/0x6f
[   80.893739] ------------[ cut here ]------------
[   80.894030] WARNING: CPU: 2 PID: 140 at lib/ref_tracker.c:255 ref_tracker_free+0x47b/0x6b0
[   80.894297] Modules linked in:
[   80.894929] CPU: 2 PID: 140 Comm: ax25_conn_rel_6 Not tainted 6.9.0-rc4-g8cd26fd90c1a #11
[   80.895190] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.14.0-0-g155821a1990b-prebuilt.qem4
[   80.895514] RIP: 0010:ref_tracker_free+0x47b/0x6b0
[   80.895808] Code: 83 c5 18 4c 89 eb 48 c1 eb 03 8a 04 13 84 c0 0f 85 df 01 00 00 41 83 7d 00 00 75 4b 4c 89 ff 9
[   80.896171] RSP: 0018:ffff888009edf8c0 EFLAGS: 00000286
[   80.896339] RAX: 1ffff1100141ac00 RBX: 1ffff1100149463b RCX: dffffc0000000000
[   80.896502] RDX: 0000000000000001 RSI: 0000000000000246 RDI: ffff88800a0d6518
[   80.896925] RBP: ffff888009edf9b0 R08: ffff88806d3288d3 R09: 1ffff1100da6511a
[   80.897212] R10: dffffc0000000000 R11: ffffed100da6511b R12: ffff88800a4a31d4
[   80.897859] R13: ffff88800a4a31d8 R14: dffffc0000000000 R15: ffff88800a0d6518
[   80.898279] FS:  00007fd88b7fe700(0000) GS:ffff88806d300000(0000) knlGS:0000000000000000
[   80.899436] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[   80.900181] CR2: 00007fd88c001d48 CR3: 000000000993e000 CR4: 00000000000006f0
...
[   80.935774] ref_tracker: sp%d@000000000bb9df3d has 1/1 users at
[   80.935774]      ax25_bind+0x424/0x4e0
[   80.935774]      __sys_bind+0x1d9/0x270
[   80.935774]      __x64_sys_bind+0x75/0x80
[   80.935774]      do_syscall_64+0xc4/0x1b0
[   80.935774]      entry_SYSCALL_64_after_hwframe+0x67/0x6f

Change ax25_dev->dev_tracker to the dev_tracker of ax25_cb
in order to mitigate the bug.

Fixes: feef318c85 ("ax25: fix UAF bugs of net_device caused by rebinding operation")
Signed-off-by: Duoming Zhou <duoming@zju.edu.cn>
Link: https://lore.kernel.org/r/20240419020456.29826-1-duoming@zju.edu.cn
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-04-23 11:35:52 +02:00
Javier Carrasco
39eaf52124 cpufreq: dt-platdev: eliminate uses of of_node_put()
Make use of the __free() cleanup handler to automatically free nodes
when they get out of scope.

Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2024-04-23 14:59:56 +05:30
Javier Carrasco
68090fdaac cpufreq: dt: eliminate uses of of_node_put()
Make use of the __free() cleanup handler to automatically free nodes
when they get out of scope.

Only find_supply_name() is affected, and the new mechanism removes the
need for a 'goto' and the 'name' local variable.

Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2024-04-23 14:59:56 +05:30
Lingbo Kong
7b5f3cbfb4 wifi: ath12k: ACPI band edge channel power support
Currently, ath12k does not have the ability to set band edge channel power
for WCN7850. In order to support this, ath12k gets band edge channel power
table in ath12k_acpi_dsm_get_data() function and sets pdev_id and
param_type_id, then finally sends these data and
WMI_PDEV_SET_BIOS_INTERFACE_CMDID to firmware to set band edge channel
power.

Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0-03427-QCAHMTSWPL_V1.0_V2.0_SILICONZ-1.15378.4

Signed-off-by: Lingbo Kong <quic_lingbok@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://msgid.link/20240422033054.979-5-quic_lingbok@quicinc.com
2024-04-23 12:29:15 +03:00
Lingbo Kong
12bccacbcd wifi: ath12k: ACPI CCA threshold support
Currently, ath12k does not have the ability to adjust Clear Channel Assessment
(CCA) threshold values to meet the regulatory requirements. Get the values from
ACPI and send them to the firmware using ath12k_wmi_set_bios_cmd() function.

Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0-03427-QCAHMTSWPL_V1.0_V2.0_SILICONZ-1.15378.4

Signed-off-by: Lingbo Kong <quic_lingbok@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://msgid.link/20240422033054.979-4-quic_lingbok@quicinc.com
2024-04-23 12:29:14 +03:00
Lingbo Kong
764883be7e wifi: ath12k: ACPI SAR support
In order to enable ACPI SAR (Specific Absorption Rate), ath12k gets SAR and GEO
offset tables from ACPI and sends the data to firmware using
WMI_PDEV_SET_BIOS_SAR_TABLE_CMDID and WMI_PDEV_SET_BIOS_GEO_TABLE_CMDID
commands.

Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0-03427-QCAHMTSWPL_V1.0_V2.0_SILICONZ-1.15378.4

Signed-off-by: Lingbo Kong <quic_lingbok@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://msgid.link/20240422033054.979-3-quic_lingbok@quicinc.com
2024-04-23 12:29:14 +03:00
Lingbo Kong
576771c9fa wifi: ath12k: ACPI TAS support
Currently, ath12k does not support Time-Average-SAR (TAS). In order to enable
TAS read the tables from ACPI and send them to the firmware using
WMI_PDEV_SET_BIOS_INTERFACE_CMDID command. Besides, ath12k registers an ACPI
event callback so that ACPI can notify ath12k to get the updated SAR power
table and sends it to the firmware when the device state is changed.

ACPI is only enabled for WCN7850 using struct ath12k_hw_params::acpi_guid
field. Most likely QCN9274 will never support ACPI as the chip is not used in
laptops.

Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0-03427-QCAHMTSWPL_V1.0_V2.0_SILICONZ-1.15378.4

Signed-off-by: Lingbo Kong <quic_lingbok@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://msgid.link/20240422033054.979-2-quic_lingbok@quicinc.com
2024-04-23 12:29:14 +03:00
Baochen Qiang
2b00284589 wifi: ath12k: change supports_suspend to true for WCN7850
Now that all things are ready, enable supports_suspend to
make suspend/resume work for WCN7850. Don't touch other
chips because they don't support suspend.

Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0-03427-QCAHMTSWPL_V1.0_V2.0_SILICONZ-1.15378.4
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1

Signed-off-by: Baochen Qiang <quic_bqiang@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://msgid.link/20240412060620.27519-11-quic_bqiang@quicinc.com
2024-04-23 12:27:16 +03:00
Baochen Qiang
8d5f4da8d7 wifi: ath12k: support suspend/resume
Now that all infrastructure is in place and ath12k is fixed to handle all the
corner cases, power down the ath12k firmware during suspend and power it back
up during resume.

For suspend, two conditions needs to be satisfied:

1. since MHI channel unprepare would be done in late suspend stage,
   ath12k needs to get all QMI-dependent things done before that stage.
2. and because unprepare MHI channels requires a working MHI stack,
   ath12k is not allowed to call mhi_power_down() until that finishes.

So the original suspend callback is separated into two parts: the first part
handles all QMI-dependent things in suspend callback; while the second part
powers down MHI in suspend_late callback. This is valid because kernel calls
ath12k's suspend callback before calling all suspend_late callbacks, making
the first condition satisfied. And because MHI devices are children of ath12k
device (ab->dev), kernel guarantees that ath12k's suspend_late callback is
called after QRTR's suspend_late callback, this satisfies the second condition.

Above analysis also applies to resume process. so the original resume
callback is separated into two parts: the first part powers up MHI stack
in resume_early callback, this guarantees MHI stack is working when
QRTR tries to prepare MHI channels (kernel calls QRTR's resume_early callback
after ath12k's resume_early callback, due to the child-father relationship);
the second part waits for the completion of restart, which would succeed
since MHI channels are ready for use by QMI.

Another notable change is in power down path, we tell mhi_power_down() to not
to destroy MHI devices, making it possible for QRTR to help unprepare/prepare
MHI channels, and finally get us rid of the potential probe-defer issue when
resume.

Also change related code due to interface changes.

Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0-03427-QCAHMTSWPL_V1.0_V2.0_SILICONZ-1.15378.4
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1

Signed-off-by: Baochen Qiang <quic_bqiang@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://msgid.link/20240412060620.27519-10-quic_bqiang@quicinc.com
2024-04-23 12:27:16 +03:00
Baochen Qiang
2652f6b472 wifi: ath12k: avoid stopping mac80211 queues in ath12k_core_restart()
Currently when resume ath12k_core_restart() calls
ath12k_core_pre_reconfigure_recovery() where mac80211 queues are
stopped by calling ieee80211_stop_queues(). Then in
ath12k_mac_op_reconfig_complete() those queues are not started
because ieee80211_wake_queues() is skipped due to the check on
reconfig_type. The result is that mac80211
could not deliver any frame to ath12k to send out, finally making
connection fail.

[84473.104249] PM: suspend exit
[84479.372397] wlan0: no VHT 160 MHz capability on 5 GHz, limiting to 80 MHz
[84479.372401] wlan0: determined local STA to be EHT, BW limited to 80 MHz
[84479.372416] wlan0: determined AP 00:03:7f:12:b7:b7 to be HE
[84479.372420] wlan0: connecting with HE mode, max bandwidth 80 MHz
[84479.580348] wlan0: authenticate with 00:03:7f:12:b7:b7 (local address=00:03:7f:37:11:53)
[84479.580351] wlan0: send auth to 00:03:7f:12:b7:b7 (try 1/3)
[84480.698993] wlan0: send auth to 00:03:7f:12:b7:b7 (try 2/3)
[84481.816505] wlan0: send auth to 00:03:7f:12:b7:b7 (try 3/3)
[84482.810966] wlan0: authentication with 00:03:7f:12:b7:b7 timed out

Actually we don't need to stop/start queues during suspend/resume,
so remove ath12k_core_pre_reconfigure_recovery() from ath12k_core_restart().
This won't cause any regression because currently the only chance
ath12k_core_restart() gets called is in reset case, where ab->is_reset
is set so that function will never be executed.

Also remove ath12k_core_post_reconfigure_recovery() because it is
not needed in suspend/resume case. This is also valid due to above
analysis.

Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0-03427-QCAHMTSWPL_V1.0_V2.0_SILICONZ-1.15378.4
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1

Signed-off-by: Baochen Qiang <quic_bqiang@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://msgid.link/20240412060620.27519-9-quic_bqiang@quicinc.com
2024-04-23 12:27:15 +03:00
Baochen Qiang
b1c9992c67 wifi: ath12k: no need to handle pktlog during suspend/resume
Currently pktlog is stopped in suspend callback and started in
resume callback, and in either scenarios it's basically to
delete/modify ab->mon_reap_timer and to purge related rings.
For WCN7850 it's pointless because pktlog is not enabled: both
ab->mon_reap_timer and those rings are not initialized.

So remove pktlog handling in suspend/resume callbacks. And
further, remove these two functions and related callee because
no one is calling them.

Other chips are not affected because now only WCN7850 supports
suspend/resume.

Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0-03427-QCAHMTSWPL_V1.0_V2.0_SILICONZ-1.15378.4
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1

Signed-off-by: Baochen Qiang <quic_bqiang@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://msgid.link/20240412060620.27519-8-quic_bqiang@quicinc.com
2024-04-23 12:27:15 +03:00
Baochen Qiang
692921ead8 wifi: ath12k: flush all packets before suspend
In order to send out all packets before going to suspend, current code
adds a 500ms delay as a workaround. It is a rough estimate and may not
work.

Fix this by checking packet counters, if counters become zero, then all
packets are sent out or dropped.

Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0-03427-QCAHMTSWPL_V1.0_V2.0_SILICONZ-1.15378.4
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1

Signed-off-by: Baochen Qiang <quic_bqiang@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://msgid.link/20240412060620.27519-7-quic_bqiang@quicinc.com
2024-04-23 12:27:15 +03:00
Baochen Qiang
7b3d4eb283 wifi: ath12k: decrease MHI channel buffer length to 8KB
Currently buf_len field of ath12k_mhi_config_wcn7850 is assigned
with 0, making MHI use a default size, 64KB, to allocate channel
buffers. This is likely to fail in some scenarios where system
memory is highly fragmented and memory compaction or reclaim is
not allowed.

For now we haven't get any failure report on this in ath12k, but
there indeed is one such case in ath11k [1].

Actually those buffers are used only by QMI target -> host communication.
And for WCN7850, the largest packet size for that is less than 6KB. So
change buf_len field to 8KB, which results in order 1 allocation if page
size is 4KB. In this way, we can at least save some memory, and as well
as decrease the possibility of allocation failure in those scenarios.

[1] https://lore.kernel.org/ath11k/96481a45-3547-4d23-ad34-3a8f1d90c1cd@suse.cz/

Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0-03427-QCAHMTSWPL_V1.0_V2.0_SILICONZ-1.15378.4
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1

Signed-off-by: Baochen Qiang <quic_bqiang@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://msgid.link/20240412060620.27519-6-quic_bqiang@quicinc.com
2024-04-23 12:27:14 +03:00
Baochen Qiang
1623bf78c8 wifi: ath12k: fix warning on DMA ring capabilities event
We are seeing below warning in both reset and suspend/resume scenarios:

[ 4153.776040] ath12k_pci 0000:04:00.0: Already processed, so ignoring dma ring caps

This is because ab->num_db_cap is not cleared in
ath12k_wmi_free_dbring_caps(), so clear it to avoid such
warnings.

Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0-03427-QCAHMTSWPL_V1.0_V2.0_SILICONZ-1.15378.4
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1

Signed-off-by: Baochen Qiang <quic_bqiang@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://msgid.link/20240412060620.27519-5-quic_bqiang@quicinc.com
2024-04-23 12:27:14 +03:00
Baochen Qiang
8591b2baae wifi: ath12k: do not dump SRNG statistics during resume
Both the firmware reset feature and the power management
suspend/resume feature share common power-down and power-up
functionality. One aspect of the power-up functionality is
the handling of the ATH12K_QMI_EVENT_FW_INIT_DONE event.
When this event is received, a call is made to
ath12k_hal_dump_srng_stats(), with the purpose to collect
information that may be useful in debugging the cause of a
firmware reset.

Unfortunately, since this functionality is shared between
both the firmware reset path and the power management
resume path, the kernel log is flooded with messages during
resume. Since these messages are not useful during resume,
and in fact can be confusing and can increase the time it
takes to resume, update the logic to only call
ath12k_hal_dump_srng_stats() during firmware reset.

Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0-03427-QCAHMTSWPL_V1.0_V2.0_SILICONZ-1.15378.4
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1

Signed-off-by: Baochen Qiang <quic_bqiang@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://msgid.link/20240412060620.27519-4-quic_bqiang@quicinc.com
2024-04-23 12:27:14 +03:00
Baochen Qiang
b8b50a489d wifi: ath12k: remove MHI LOOPBACK channels
There is no driver to match these two channels, so
remove them. This fixes warnings from MHI subsystem during suspend:

mhi mhi0_LOOPBACK: 1: Failed to reset channel, still resetting
mhi mhi0_LOOPBACK: 0: Failed to reset channel, still resetting

Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0-03427-QCAHMTSWPL_V1.0_V2.0_SILICONZ-1.15378.4
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1

Signed-off-by: Baochen Qiang <quic_bqiang@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://msgid.link/20240412060620.27519-3-quic_bqiang@quicinc.com
2024-04-23 12:27:14 +03:00
Baochen Qiang
c7b2da3c0a wifi: ath12k: rearrange IRQ enable/disable in reset path
For non-WoW suspend/resume, ath12k host powers down whole hardware
when suspend and powers up it when resume, the code path it goes
through is very like the ath12k reset logic.

In order to reuse that logic, rearrange IRQ handling in the reset
path.

Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0-03427-QCAHMTSWPL_V1.0_V2.0_SILICONZ-1.15378.4
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1

Signed-off-by: Baochen Qiang <quic_bqiang@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://msgid.link/20240412060620.27519-2-quic_bqiang@quicinc.com
2024-04-23 12:27:13 +03:00
Baochen Qiang
303c017821 wifi: ath12k: fix kernel crash during resume
Currently during resume, QMI target memory is not properly handled, resulting
in kernel crash in case DMA remap is not supported:

BUG: Bad page state in process kworker/u16:54  pfn:36e80
page: refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x36e80
page dumped because: nonzero _refcount
Call Trace:
 bad_page
 free_page_is_bad_report
 __free_pages_ok
 __free_pages
 dma_direct_free
 dma_free_attrs
 ath12k_qmi_free_target_mem_chunk
 ath12k_qmi_msg_mem_request_cb

The reason is:
Once ath12k module is loaded, firmware sends memory request to host. In case
DMA remap not supported, ath12k refuses the first request due to failure in
allocating with large segment size:

ath12k_pci 0000:04:00.0: qmi firmware request memory request
ath12k_pci 0000:04:00.0: qmi mem seg type 1 size 7077888
ath12k_pci 0000:04:00.0: qmi mem seg type 4 size 8454144
ath12k_pci 0000:04:00.0: qmi dma allocation failed (7077888 B type 1), will try later with small size
ath12k_pci 0000:04:00.0: qmi delays mem_request 2
ath12k_pci 0000:04:00.0: qmi firmware request memory request

Later firmware comes back with more but small segments and allocation
succeeds:

ath12k_pci 0000:04:00.0: qmi mem seg type 1 size 524288
ath12k_pci 0000:04:00.0: qmi mem seg type 1 size 524288
ath12k_pci 0000:04:00.0: qmi mem seg type 1 size 524288
ath12k_pci 0000:04:00.0: qmi mem seg type 1 size 524288
ath12k_pci 0000:04:00.0: qmi mem seg type 1 size 524288
ath12k_pci 0000:04:00.0: qmi mem seg type 1 size 524288
ath12k_pci 0000:04:00.0: qmi mem seg type 1 size 524288
ath12k_pci 0000:04:00.0: qmi mem seg type 1 size 262144
ath12k_pci 0000:04:00.0: qmi mem seg type 1 size 524288
ath12k_pci 0000:04:00.0: qmi mem seg type 1 size 524288
ath12k_pci 0000:04:00.0: qmi mem seg type 1 size 524288
ath12k_pci 0000:04:00.0: qmi mem seg type 1 size 524288
ath12k_pci 0000:04:00.0: qmi mem seg type 1 size 524288
ath12k_pci 0000:04:00.0: qmi mem seg type 4 size 524288
ath12k_pci 0000:04:00.0: qmi mem seg type 4 size 524288
ath12k_pci 0000:04:00.0: qmi mem seg type 4 size 524288
ath12k_pci 0000:04:00.0: qmi mem seg type 4 size 524288
ath12k_pci 0000:04:00.0: qmi mem seg type 4 size 524288
ath12k_pci 0000:04:00.0: qmi mem seg type 4 size 524288
ath12k_pci 0000:04:00.0: qmi mem seg type 4 size 524288
ath12k_pci 0000:04:00.0: qmi mem seg type 4 size 524288
ath12k_pci 0000:04:00.0: qmi mem seg type 4 size 524288
ath12k_pci 0000:04:00.0: qmi mem seg type 4 size 524288
ath12k_pci 0000:04:00.0: qmi mem seg type 4 size 524288
ath12k_pci 0000:04:00.0: qmi mem seg type 4 size 524288
ath12k_pci 0000:04:00.0: qmi mem seg type 4 size 524288
ath12k_pci 0000:04:00.0: qmi mem seg type 4 size 524288
ath12k_pci 0000:04:00.0: qmi mem seg type 4 size 524288
ath12k_pci 0000:04:00.0: qmi mem seg type 4 size 524288
ath12k_pci 0000:04:00.0: qmi mem seg type 4 size 65536
ath12k_pci 0000:04:00.0: qmi mem seg type 1 size 524288

Now ath12k is working. If suspend is triggered, firmware will be reloaded
during resume. As same as before, firmware requests two large segments at
first. In ath12k_qmi_msg_mem_request_cb() segment count and size are
assigned:

	ab->qmi.mem_seg_count == 2
	ab->qmi.target_mem[0].size == 7077888
	ab->qmi.target_mem[1].size == 8454144

Then allocation failed like before and ath12k_qmi_free_target_mem_chunk()
is called to free all allocated segments. Note the first segment is skipped
because its v.addr is cleared due to allocation failure:

	chunk->v.addr = dma_alloc_coherent()

Also note that this leaks that segment because it has not been freed.

While freeing the second segment, a size of 8454144 is passed to
dma_free_coherent(). However remember that this segment is allocated at
the first time firmware is loaded, before suspend. So its real size is
524288, much smaller than 8454144. As a result kernel found we are freeing
some memory which is in use and thus crashed.

So one possible fix would be to free those segments during suspend. This
works because with them freed, ath12k_qmi_free_target_mem_chunk() does
nothing: all segment addresses are NULL so dma_free_coherent() is not called.

But note that ath11k has similar logic but never hits this issue. Reviewing
code there shows the luck comes from QMI memory reuse logic. So the decision
is to port it to ath12k. Like in ath11k, the crash is avoided by adding
prev_size to target_mem_chunk structure and caching real segment size in it,
then prev_size instead of current size is passed to dma_free_coherent(),
no unexpected memory is freed now.

Also reuse m3 buffer.

Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0-03427-QCAHMTSWPL_V1.0_V2.0_SILICONZ-1.15378.4
Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3

Signed-off-by: Baochen Qiang <quic_bqiang@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://msgid.link/20240419034034.2842-1-quic_bqiang@quicinc.com
2024-04-23 12:25:29 +03:00
Jack Yu
bda16500dd
ASoC: rt715-sdca: volume step modification
Volume step (dB/step) modification to fix format error
which shown in amixer control.

Signed-off-by: Jack Yu <jack.yu@realtek.com>
Link: https://lore.kernel.org/r/b1f546ad16dc4c7abb7daa7396e8345c@realtek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
2024-04-23 17:50:38 +09:00
Inochi Amaoto
1eba0b61be riscv: dts: sophgo: add reserved memory node for CV1800B
The original dts of CV1800B has a weird memory length as it
contains reserved memory for coprocessor. Make this area a
separate node so it can get the real memory length.

Link: https://lore.kernel.org/r/IA1PR20MB49531F274753B04A5547DB59BB052@IA1PR20MB4953.namprd20.prod.outlook.com
Signed-off-by: Inochi Amaoto <inochiama@outlook.com>
Signed-off-by: Chen Wang <unicorn_wang@outlook.com>
2024-04-23 16:38:09 +08:00
Paolo Abeni
9b9fd023e9 Merge branch 'read-phy-address-of-switch-from-device-tree-on-mt7530-dsa-subdriver'
Arınç ÜNAL says:

====================
Read PHY address of switch from device tree on MT7530 DSA subdriver

This patch series makes the driver read the PHY address the switch listens
on from the device tree which, in result, brings support for MT7530
switches listening on a different PHY address than 31. And the patch series
simplifies the core operations.

Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
====================

Link: https://lore.kernel.org/r/20240418-b4-for-netnext-mt7530-phy-addr-from-dt-and-simplify-core-ops-v3-0-3b5fb249b004@arinc9.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-04-23 10:32:43 +02:00
Arınç ÜNAL
7c5e37d7ee net: dsa: mt7530: simplify core operations
The core_rmw() function calls core_read_mmd_indirect() to read the
requested register, and then calls core_write_mmd_indirect() to write the
requested value to the register. Because Clause 22 is used to access Clause
45 registers, some operations on core_write_mmd_indirect() are
unnecessarily run. Get rid of core_read_mmd_indirect() and
core_write_mmd_indirect(), and run only the necessary operations on
core_write() and core_rmw().

Reviewed-by: Daniel Golle <daniel@makrotopia.org>
Tested-by: Daniel Golle <daniel@makrotopia.org>
Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-04-23 10:32:40 +02:00
Arınç ÜNAL
868ff5f494 net: dsa: mt7530-mdio: read PHY address of switch from device tree
Read the PHY address the switch listens on from the reg property of the
switch node on the device tree. This change brings support for MT7530
switches on boards with such bootstrapping configuration where the switch
listens on a different PHY address than the hardcoded PHY address on the
driver, 31.

As described on the "MT7621 Programming Guide v0.4" document, the MT7530
switch and its PHYs can be configured to listen on the range of 7-12,
15-20, 23-28, and 31 and 0-4 PHY addresses.

There are operations where the switch PHY registers are used. For the PHY
address of the control PHY, transform the MT753X_CTRL_PHY_ADDR constant
into a macro and use it. The PHY address for the control PHY is 0 when the
switch listens on 31. In any other case, it is one greater than the PHY
address the switch listens on.

Reviewed-by: Daniel Golle <daniel@makrotopia.org>
Tested-by: Daniel Golle <daniel@makrotopia.org>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-04-23 10:32:40 +02:00
Daniel Okazaki
f42c97027f eeprom: at24: fix memory corruption race condition
If the eeprom is not accessible, an nvmem device will be registered, the
read will fail, and the device will be torn down. If another driver
accesses the nvmem device after the teardown, it will reference
invalid memory.

Move the failure point before registering the nvmem device.

Signed-off-by: Daniel Okazaki <dtokazaki@google.com>
Fixes: b20eb4c1f0 ("eeprom: at24: drop unnecessary label")
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20240422174337.2487142-1-dtokazaki@google.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
2024-04-23 10:07:48 +02:00
Zelong Dong
a42f2e9ba1 arm64: dts: amlogic: Add Amlogic T7 reset controller
Add the device node and related header file
for Amlogic T7 reset controller.

Signed-off-by: Zelong Dong <zelong.dong@amlogic.com>
Signed-off-by: Kelvin Zhang <kelvin.zhang@amlogic.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20240422-t7-reset-v2-3-cb82271d3296@amlogic.com
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
2024-04-23 10:04:25 +02:00
Geert Uytterhoeven
f026b64266 arm64: dts: renesas: r8a779h0: Link IOMMU consumers
Link all IOMMU consumers to the corresponding IPMMU instances.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/d22ff0526263937ddfa214cdc3ec116a359cbb27.1713526951.git.geert+renesas@glider.be
2024-04-23 09:42:41 +02:00
Thanh Le
5bd21a0009 arm64: dts: renesas: r8a779h0: Add IPMMU nodes
Add device nodes for the main and cache I/O Memory Management Unit
(IPMMU) instances on the R-Car V4M (R8A779H0) SoC.

Add IPMMU main and cache nodes for R-Car R8A779H0 SoC.

Signed-off-by: Thanh Le <thanh.le.xv@renesas.com>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/b4701548e199ee2a72434bf73990557a63e13bd9.1713526951.git.geert+renesas@glider.be
2024-04-23 09:42:41 +02:00
Geert Uytterhoeven
d28970ddd1 arm64: dts: renesas: r8a779h0: Add INTC-EX node
Add the device node for the Interrupt Controller for External Devices
(INTC-EX) on the Renesas R-Car V4M (R8A779H0) SoC, which serves external
IRQ pins IRQ[0-5].

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Tested-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Link: https://lore.kernel.org/r/66aba473186df9a137e7f95393209b23a5916fd1.1713281889.git.geert+renesas@glider.be
2024-04-23 09:42:38 +02:00
Thanh Quan
a6e140f174 arm64: dts: renesas: r8a779h0: Add MSIOF nodes
Add device nodes for the Clock-Synchronized Serial Interfaces with FIFO
(MSIOF) on the Renesas R-Car V4M (R8A779H0) SoC.

Signed-off-by: Thanh Quan <thanh.quan.xn@renesas.com>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/62d2a1424cabda06c53541d93f6a1a5110267a71.1713280753.git.geert+renesas@glider.be
2024-04-23 09:40:39 +02:00
Geert Uytterhoeven
21fc4d1959 pinctrl: renesas: r8a779h0: Add INTC-EX pins, groups, and function
Add pins, groups, and function for the Interrupt Controller for External
Devices (INTC-EX) on the Renesas R-Car V4M (R8A779H0) SoC.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/258d03b27b77f60cc03fc3257bb4c6715b612a61.1713282028.git.geert+renesas@glider.be
2024-04-23 09:39:23 +02:00
Geert Uytterhoeven
c3bec9547c pinctrl: renesas: r8a779h0: Fix IRQ suffixes
The suffixes of the IRQ identifiers, as used for pins related to the
Interrupt Controller for External Devices (INTC-EX), are inconsistent.
Correct them to match the Pin Multiplex attachment in Rev.0.51 of the
R-Car V4M Series Hardware User's Manual.

Fixes: 291f7856fc ("pinctrl: renesas: Initial R8A779H0 (R-Car V4M) PFC support")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/7d3c7498d9e8eda5583b15f9163eb25bb797ed24.1713282028.git.geert+renesas@glider.be
2024-04-23 09:39:23 +02:00
David Howells
619606a7b8
netfs: Fix writethrough-mode error handling
Fix the error return in netfs_perform_write() acting in writethrough-mode
to return any cached error in the case that netfs_end_writethrough()
returns 0.

This can affect the use of O_SYNC/O_DSYNC/RWF_SYNC/RWF_DSYNC in 9p and afs.

Fixes: 41d8e7673a ("netfs: Implement a write-through caching option")
Signed-off-by: David Howells <dhowells@redhat.com>
Link: https://lore.kernel.org/r/6736.1713343639@warthog.procyon.org.uk
Reviewed-by: Jeff Layton <jlayton@kernel.org>
cc: Eric Van Hensbergen <ericvh@kernel.org>
cc: Latchesar Ionkov <lucho@ionkov.net>
cc: Dominique Martinet <asmadeus@codewreck.org>
cc: Christian Schoenebeck <linux_oss@crudebyte.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: netfs@lists.linux.dev
cc: linux-fsdevel@vger.kernel.org
cc: v9fs@lists.linux.dev
cc: linux-afs@lists.infradead.org
Signed-off-by: Christian Brauner <brauner@kernel.org>
2024-04-23 09:39:07 +02:00
Christian Brauner
9b872cc50d
ntfs3: add legacy ntfs file operations
To ensure that ioctl()s can't be used to circumvent write restrictions.

Signed-off-by: Christian Brauner <brauner@kernel.org>
2024-04-23 09:39:07 +02:00
Christian Brauner
d55f90e9b2
ntfs3: enforce read-only when used as legacy ntfs driver
Ensure that ntfs3 is mounted read-only when it is used to provide the
legacy ntfs driver.

Signed-off-by: Christian Brauner <brauner@kernel.org>
2024-04-23 09:39:07 +02:00
Lad Prabhakar
2487dc87ae pinctrl: renesas: rzg2l: Remove extra space in function parameter
Remove unnecessary space in rzg2l_pinctrl_pm_setup_pfc() function
parameter.

Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20240226192530.141945-1-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2024-04-23 09:38:33 +02:00
Marco Pagani
b7c0e1ecee
fpga: region: add owner module and take its refcount
The current implementation of the fpga region assumes that the low-level
module registers a driver for the parent device and uses its owner pointer
to take the module's refcount. This approach is problematic since it can
lead to a null pointer dereference while attempting to get the region
during programming if the parent device does not have a driver.

To address this problem, add a module owner pointer to the fpga_region
struct and use it to take the module's refcount. Modify the functions for
registering a region to take an additional owner module parameter and
rename them to avoid conflicts. Use the old function names for helper
macros that automatically set the module that registers the region as the
owner. This ensures compatibility with existing low-level control modules
and reduces the chances of registering a region without setting the owner.

Also, update the documentation to keep it consistent with the new interface
for registering an fpga region.

Fixes: 0fa20cdfcc ("fpga: fpga-region: device tree control for FPGA")
Suggested-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Suggested-by: Xu Yilun <yilun.xu@intel.com>
Reviewed-by: Russ Weight <russ.weight@linux.dev>
Signed-off-by: Marco Pagani <marpagan@redhat.com>
Acked-by: Xu Yilun <yilun.xu@intel.com>
Link: https://lore.kernel.org/r/20240419083601.77403-1-marpagan@redhat.com
Signed-off-by: Xu Yilun <yilun.xu@linux.intel.com>
2024-04-23 15:37:20 +08:00
Lad Prabhakar
44019387fc clk: renesas: r9a07g043: Add clock and reset entry for PLIC
Add the missing clock and reset entry for PLIC. Also add
R9A07G043_NCEPLIC_ACLK to the critical clocks list.

Fixes: 95d48d2703 ("clk: renesas: r9a07g043: Add support for RZ/Five SoC")
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20240403200952.633084-1-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2024-04-23 09:36:49 +02:00
Peter Colberg
dbca8048b3
fpga: dfl: remove unused member pdata from struct dfl_{afu,fme}
The member pdata in struct dfl_{afu,fme} is set in function
{afu,fme}_dev_init(), respectively, but never used.

Fixes: 857a26222f ("fpga: dfl: afu: add afu sub feature support")
Fixes: 29de76240e ("fpga: dfl: fme: add partial reconfiguration sub feature support")
Signed-off-by: Peter Colberg <peter.colberg@intel.com>
Reviewed-by: Matthew Gerlach <matthew.gerlach@linux.intel.com>
Acked-by: Xu Yilun <yilun.xu@intel.com>
Link: https://lore.kernel.org/r/20240415235937.3121-1-peter.colberg@intel.com
Signed-off-by: Xu Yilun <yilun.xu@linux.intel.com>
2024-04-23 15:36:33 +08:00
Peter Colberg
7c2dafa60e
fpga: dfl: remove unused function is_dfl_feature_present()
The function is_dfl_feature_present() was added but never used.

Fixes: 5b57d02a2f ("fpga: dfl: add feature device infrastructure")
Signed-off-by: Peter Colberg <peter.colberg@intel.com>
Reviewed-by: Matthew Gerlach <matthew.gerlach@linux.intel.com>
Acked-by: Xu Yilun <yilun.xu@intel.com>
Link: https://lore.kernel.org/r/20240415235743.3045-1-peter.colberg@intel.com
Signed-off-by: Xu Yilun <yilun.xu@linux.intel.com>
2024-04-23 15:36:33 +08:00
Andy Shevchenko
1eb3816c27
fpga: ice40-spi: Don't use "proxy" headers
Update header inclusions to follow IWYU (Include What You Use)
principle.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Xu Yilun <yilun.xu@intel.com>
Link: https://lore.kernel.org/r/20240415142428.853812-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Xu Yilun <yilun.xu@linux.intel.com>
2024-04-23 15:36:32 +08:00
Cong Dang
ef9916d0e2 clk: renesas: r8a779h0: Add INTC-EX clock
Add the module clock used by the Interrupt Controller for External
Devices (INTC-EX) aka IRQC on the Renesas R-Car V4M (R8A779H0) SoC.

Signed-off-by: Cong Dang <cong.dang.xn@renesas.com>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/e260fd8eac0187c690ac6c62673b29f97e2ad5a4.1713279470.git.geert+renesas@glider.be
2024-04-23 09:35:53 +02:00
Cong Dang
50f0cbd5cc clk: renesas: r8a779h0: Add MSIOF clocks
Add the module clocks used by the Clock-Synchronized Serial Interfaces
with FIFO (MSIOF) on the Renesas R-Car V4M (R8A779H0) SoC.

Signed-off-by: Cong Dang <cong.dang.xn@renesas.com>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/86ce05ae274d384c5221bd136415a7b0a1579592.1713279332.git.geert+renesas@glider.be
2024-04-23 09:35:53 +02:00
Geert Uytterhoeven
3b23118bdb clk: renesas: r8a779a0: Fix CANFD parent clock
According to Figure 52A.1 ("RS-CANFD Module Block Diagram (in classical
CAN mode)") in the R-Car V3U Series User’s Manual Rev. 0.5, the parent
clock for the CANFD peripheral module clock is the S3D2 clock.

Fixes: 9b621b6adf ("clk: renesas: r8a779a0: Add CANFD module clock")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/aef9300f44c9141b1465343f91c5cc7303249b6e.1713279523.git.geert+renesas@glider.be
2024-04-23 09:35:53 +02:00
Dharma Balasubiramani
e95752752e MAINTAINERS: add SAM9X7 SoC's LVDS controller
Add the newly added LVDS controller for the SAM9X7 SoC to the existing
MAINTAINERS entry.

Signed-off-by: Dharma Balasubiramani <dharma.b@microchip.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Link: https://lore.kernel.org/r/20240421011050.43265-4-dharma.b@microchip.com
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240421011050.43265-4-dharma.b@microchip.com
2024-04-23 09:29:45 +02:00
Dharma Balasubiramani
179b0769fc drm/bridge: add lvds controller support for sam9x7
Add a new LVDS controller driver for sam9x7 which does the following:
- Prepares and enables the LVDS Peripheral clock
- Defines its connector type as DRM_MODE_CONNECTOR_LVDS and adds itself
to the global bridge list.
- Identifies its output endpoint as panel and adds it to the encoder
display pipeline
- Enables the LVDS serializer

Signed-off-by: Manikandan Muralidharan <manikandan.m@microchip.com>
Signed-off-by: Dharma Balasubiramani <dharma.b@microchip.com>
Acked-by: Hari Prasath Gujulan Elango <hari.prasathge@microchip.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20240421011050.43265-3-dharma.b@microchip.com
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240421011050.43265-3-dharma.b@microchip.com
2024-04-23 09:29:43 +02:00
Dharma Balasubiramani
c24177ca3b dt-bindings: display: bridge: add sam9x75-lvds binding
Add the 'sam9x75-lvds' compatible binding, which describes the Low Voltage
Differential Signaling (LVDS) Controller found on some Microchip's sam9x7
series System-on-Chip (SoC) devices. This binding will be used to define
the properties and configuration for the LVDS Controller in DT.

Signed-off-by: Dharma Balasubiramani <dharma.b@microchip.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20240421011050.43265-2-dharma.b@microchip.com
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240421011050.43265-2-dharma.b@microchip.com
2024-04-23 09:29:43 +02:00
Yangtao Li
f9059eb5d7 cpuidle: kirkwood: Convert to platform remove callback returning void
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is (mostly) ignored
and this typically results in resource leaks. To improve here there is a
quest to make the remove callback return void. In the first step of this
quest all drivers are converted to .remove_new() which already returns
void.

Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.

Cc: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Yangtao Li <frank.li@vivo.com>
Reviewed-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20230712094014.41787-1-frank.li@vivo.com
2024-04-23 09:21:48 +02:00