The register offset arrays are ordered based on the register
offsets for all PLLs but the Stromer. For consistency, reorder
the Stromer specific array as well.
No functional changes.
Signed-off-by: Gabor Juhos <j4g8y7@gmail.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20240311-alpha-pll-stromer-cleanup-v1-2-f7c0c5607cca@gmail.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The offset of the CONFIG_CTL_U register defined for the Stromer
PLL is wrong. It is not aligned on a 4 bytes boundary which might
causes errors in regmap operations.
Maybe the intention behind of using the 0xff value was to indicate
that the register is not implemented in the PLL, but this is not
verified anywhere in the code. Moreover, this value is not used
even in other register offset arrays despite that those PLLs also
have unimplemented registers.
Additionally, on the Stromer PLLs the current code only touches
the CONFIG_CTL_U register if the result of pll_has_64bit_config()
is true which condition is not affected by the change.
Due to the reasons above, simply remove the CONFIG_CTL_U entry
from the Stromer specific array.
Fixes: e47a4f55f2 ("clk: qcom: clk-alpha-pll: Add support for Stromer PLLs")
Signed-off-by: Gabor Juhos <j4g8y7@gmail.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20240311-alpha-pll-stromer-cleanup-v1-1-f7c0c5607cca@gmail.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Each RPMh VRM accelerator resource has 3 or 4 contiguous 4-byte aligned
addresses associated with it. These control voltage, enable state, mode,
and in legacy targets, voltage headroom. The current in-flight request
checking logic looks for exact address matches. Requests for different
addresses of the same RPMh resource as thus not detected as in-flight.
Add new cmd-db API cmd_db_match_resource_addr() to enhance the in-flight
request check for VRM requests by ignoring the address offset.
This ensures that only one request is allowed to be in-flight for a given
VRM resource. This is needed to avoid scenarios where request commands are
carried out by RPMh hardware out-of-order leading to LDO regulator
over-current protection triggering.
Fixes: 658628e7ef ("drivers: qcom: rpmh-rsc: add RPMH controller for QCOM SoCs")
Cc: stable@vger.kernel.org
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Tested-by: Elliot Berman <quic_eberman@quicinc.com> # sm8650-qrd
Signed-off-by: Maulik Shah <quic_mkshah@quicinc.com>
Link: https://lore.kernel.org/r/20240215-rpmh-rsc-fixes-v4-1-9cbddfcba05b@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Other places that had pseudocode were prefixed with ::
so as to appear in a literal block, but one place was inconsistent.
This patch fixes that inconsistency.
Signed-off-by: Dave Thaler <dthaler1968@googlemail.com>
Acked-by: David Vernet <void@manifault.com>
Link: https://lore.kernel.org/r/20240419213826.7301-1-dthaler1968@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Crashdump collection is done based on DLOAD bits of TCSR register.
To retain other bits, scm driver need to read the register and
modify only the DLOAD bits, as other bits in TCSR may have their
own significance.
Co-developed-by: Poovendhan Selvaraj <quic_poovendh@quicinc.com>
Signed-off-by: Poovendhan Selvaraj <quic_poovendh@quicinc.com>
Signed-off-by: Mukesh Ojha <quic_mojha@quicinc.com>
Tested-by: Kathiravan Thirumoorthy <quic_kathirav@quicinc.com> # IPQ9574 and IPQ5332
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Elliot Berman <quic_eberman@quicinc.com>
Link: https://lore.kernel.org/r/1711042655-31948-1-git-send-email-quic_mojha@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
It is possible qcom_scm_is_available() gives wrong indication that
if __scm is initialized while __scm->dev is not and similar issue
is also possible with __scm->waitq_comp.
Fix this appropriately by the use of release barrier and read barrier
that will make sure if __scm is initialized so, is all of its field
variable.
Fixes: d0f6fa7ba2 ("firmware: qcom: scm: Convert SCM to platform driver")
Fixes: 6bf3259922 ("firmware: qcom: scm: Add wait-queue handling logic")
Signed-off-by: Mukesh Ojha <quic_mojha@quicinc.com>
Link: https://lore.kernel.org/r/1711034642-22860-4-git-send-email-quic_mojha@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
QCOM_SCM_BOOT_SET_DLOAD_MODE scm command is applicable for very
older SoCs where this command is supported from firmware and
for newer SoCs, dload mode tcsr registers is used for setting
the download mode.
Currently, qcom_scm_set_download_mode() checks for availability
of QCOM_SCM_BOOT_SET_DLOAD_MODE command even for SoCs where this
is not used. Fix this by switching the condition to keep the
command availability check only if dload mode registers are not
available.
Signed-off-by: Mukesh Ojha <quic_mojha@quicinc.com>
Reviewed-by: Elliot Berman <quic_eberman@quicinc.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/1711034642-22860-3-git-send-email-quic_mojha@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Soc node has ranges, thus it must have an unit address. This fixes W=1
dtc warning:
sdx75.dtsi:399.11-736.4: Warning (unit_address_vs_reg): /soc: node has a reg or ranges property, but no unit name
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20240325102924.26820-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Add the node for the DisplayPort controller found on the SM6350 SoC.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20240329-sm6350-dp-v2-3-e46dceb32ef5@fairphone.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
In case the client is registered after the pmic-glink recived a response
from the Protection Domain mapper, it is going to miss the notification
about the state. Notify clients about the current state upon
registration.
Fixes: 58ef4ece1e ("soc: qcom: pmic_glink: Introduce base PMIC GLINK driver")
Reviewed-by: Andrew Halaney <ahalaney@redhat.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Mukesh Ojha <quic_mojha@quicinc.com>
Tested-by: Xilin Wu <wuxilin123@gmail.com> # on QCS8550 AYN Odin 2
Link: https://lore.kernel.org/r/20240403-pmic-glink-fix-clients-v2-2-aed4e02baacc@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Take the client_lock before traversing the clients list at the
pmic_glink_state_notify_clients() function. This is required to keep the
list traversal safe from concurrent modification.
Fixes: 58ef4ece1e ("soc: qcom: pmic_glink: Introduce base PMIC GLINK driver")
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Andrew Halaney <ahalaney@redhat.com>
Reviewed-by: Mukesh Ojha <quic_mojha@quicinc.com>
Tested-by: Xilin Wu <wuxilin123@gmail.com> # on QCS8550 AYN Odin 2
Link: https://lore.kernel.org/r/20240403-pmic-glink-fix-clients-v2-1-aed4e02baacc@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
There are two menu entries for X86_EXTENDED_PLATFORM, one for X86_32 and
the other for X86_64.
These entries are nearly identical, with the only difference being the
platform list in the help message.
While this structure was intended by commit
8425091ff8 ("x86: improve the help text of X86_EXTENDED_PLATFORM"),
there is no need to duplicate the entire config entry. Instead, provide
a little more clarification in the help message.
[ bp: Massage. ]
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/20240204100719.42574-1-masahiroy@kernel.org
-----BEGIN PGP SIGNATURE-----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=YLBT
-----END PGP SIGNATURE-----
Merge tag 'sched_urgent_for_v6.9_rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler fix from Borislav Petkov:
- Add a missing memory barrier in the concurrency ID mm switching
* tag 'sched_urgent_for_v6.9_rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
sched: Add missing memory barrier in switch_mm_cid
- Print the correct error code when FRED reports a bad event type
- Add a FRED-specific INT80 handler without the special dances that need
to happen in the current one
- Enable the using-the-default-return-thunk-but-you-should-not warning
only on configs which actually enable those special return thunks
- Check the proper feature flags when selecting BHI retpoline mitigation
-----BEGIN PGP SIGNATURE-----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=53Ih
-----END PGP SIGNATURE-----
Merge tag 'x86_urgent_for_v6.9_rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Borislav Petkov:
- Fix CPU feature dependencies of GFNI, VAES, and VPCLMULQDQ
- Print the correct error code when FRED reports a bad event type
- Add a FRED-specific INT80 handler without the special dances that
need to happen in the current one
- Enable the using-the-default-return-thunk-but-you-should-not warning
only on configs which actually enable those special return thunks
- Check the proper feature flags when selecting BHI retpoline
mitigation
* tag 'x86_urgent_for_v6.9_rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/cpufeatures: Fix dependencies for GFNI, VAES, and VPCLMULQDQ
x86/fred: Fix incorrect error code printout in fred_bad_type()
x86/fred: Fix INT80 emulation for FRED
x86/retpolines: Enable the default thunk warning only on relevant configs
x86/bugs: Fix BHI retpoline check
Qualcomm PMIC ChargerPD ULOG and RPM Master Statistics drivers are
solely for debugging purposes and should not be autoloaded as modules.
Add comments to annotate missing MODULE_DEVICE_TABLE.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Link: https://lore.kernel.org/r/20240410184522.271889-1-krzk@kernel.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Enable the ADSP, CDSP and WPSS that are found on qcs6490-rb3gen2.
Signed-off-by: Komal Bajaj <quic_kbajaj@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20240417120928.32344-3-quic_kbajaj@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Now that NHLT support in ACPI framework was introduced, migrate avs
driver to new API.
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20240419084307.2718881-3-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
PCM6240 family chips are popular among audio customers, in spite of only a
portion of the functionality of codec, such as ADC or DAC, and so on, for
different Specifications, range from Personal Electric to Automotive
Electric, even some professional fields. Yet their audio performance is far
superior to the codec's, and cost is lower than codec, and much easier to
program than codec.
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Shenghao Ding <shenghao-ding@ti.com>
Link: https://lore.kernel.org/r/20240407091846.1299-5-shenghao-ding@ti.com
Signed-off-by: Mark Brown <broonie@kernel.org>
PCM6240 driver implements a flexible and configurable setting for register
and filter coefficients, to one, two or even multiple PCM6240 Family Audio
chips.
Signed-off-by: Shenghao Ding <shenghao-ding@ti.com>
Link: https://lore.kernel.org/r/20240407091846.1299-4-shenghao-ding@ti.com
Signed-off-by: Mark Brown <broonie@kernel.org>
PCM6240 driver implements a flexible and configurable setting for register
and filter coefficients, to one, two or even multiple PCM6240 Family Audio
chips.
Signed-off-by: Shenghao Ding <shenghao-ding@ti.com>
Link: https://lore.kernel.org/r/20240407091846.1299-3-shenghao-ding@ti.com
Signed-off-by: Mark Brown <broonie@kernel.org>
PCM6240 driver implements a flexible and configurable setting for register
and filter coefficients, to one, two or even multiple PCM6240 Family Audio
chips.
Signed-off-by: Shenghao Ding <shenghao-ding@ti.com>
Link: https://lore.kernel.org/r/20240407091846.1299-2-shenghao-ding@ti.com
Signed-off-by: Mark Brown <broonie@kernel.org>
By checking the pmic node with microchip,mcp16502.yaml#
'regulator-suspend-voltage' does not match any of the
regexes 'pinctrl-[0-9]+' from schema microchip,mcp16502.yaml#
which inherits regulator.yaml#. So replace regulator-suspend-voltage
with regulator-suspend-microvolt to avoid the inconsitency.
Fixes: ebd6591f8d ("ARM: dts: microchip: sama7g54_curiosity: Add initial device tree of the board")
Signed-off-by: Andrei Simion <andrei.simion@microchip.com>
Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Link: https://lore.kernel.org/r/20240404123824.19182-3-andrei.simion@microchip.com
Signed-off-by: Claudiu Beznea <claudiu.beznea@tuxon.dev>
By checking the pmic node with microchip,mcp16502.yaml#
'regulator-suspend-voltage' does not match any of the
regexes 'pinctrl-[0-9]+' from schema microchip,mcp16502.yaml#
which inherits regulator.yaml#. So replace regulator-suspend-voltage
with regulator-suspend-microvolt to avoid the inconsitency.
Fixes: 85b1304b9d ("ARM: dts: at91: sama7g5ek: set regulator voltages for standby state")
Signed-off-by: Andrei Simion <andrei.simion@microchip.com>
Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Link: https://lore.kernel.org/r/20240404123824.19182-2-andrei.simion@microchip.com
[claudiu.beznea: added a dot before starting the last sentence in commit
description]
Signed-off-by: Claudiu Beznea <claudiu.beznea@tuxon.dev>
The existing behavior of ib_umad, which maintains received MAD
packets in an unbounded list, poses a risk of uncontrolled growth.
As user-space applications extract packets from this list, the rate
of extraction may not match the rate of incoming packets, leading
to potential list overflow.
To address this, we introduce a limit to the size of the list. After
considering typical scenarios, such as OpenSM processing, which can
handle approximately 100k packets per second, and the 1-second retry
timeout for most packets, we set the list size limit to 200k. Packets
received beyond this limit are dropped, assuming they are likely timed
out by the time they are handled by user-space.
Notably, packets queued on the receive list due to reasons like
timed-out sends are preserved even when the list is full.
Signed-off-by: Michael Guralnik <michaelgur@nvidia.com>
Reviewed-by: Mark Zhang <markzhang@nvidia.com>
Link: https://lore.kernel.org/r/7197cb58a7d9e78399008f25036205ceab07fbd5.1713268818.git.leon@kernel.org
Signed-off-by: Leon Romanovsky <leon@kernel.org>
discard_new_inode() is the wrong interface to use when we need to free
an inode that was never inserted into the inode hash table; we can
bypass the whole iput() -> evict() path and replace it with
__destroy_inode(); kmem_cache_free() - this fixes a WARN_ON() about
I_NEW.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
bch2_journal_write() was incorrectly waiting on earlier journal writes
synchronously; this usually worked because most of the time we'd be
running in the context of a thread that did a journal_buf_put(), but
sometimes we'd be running out of the same workqueue that completes those
prior journal writes.
Additionally, this makes sure to punt to a workqueue before submitting
preflushes - we really don't want to be calling submit_bio() in the main
transaction commit path.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Add a tool to generate a picture of the current DAPM state for a sound
card.
dapm-graph is inspired by vizdapm which used to be published on a Wolfson
Micro git repository now disappeared, and has a few forks around:
https://github.com/mihais/asoc-toolshttps://github.com/alexandrebelloni/asoc-tools
dapm-graph is a full reimplementation with several improvements while still
being a self-contained shell script:
Improvements to rendered output:
- shows the entire card, not one component hierarchy only
- each component is rendered in a separate box
- shows widget on/off status based on widget information alone (the
original vizdapm propagates the "on" green colour to the first input
widget)
- use bold line and gray background and not only green/red line to show
on/off status (for the color blind)
Improvements for embedded system developers:
- remote mode: get state of remote device (possibly with minimal rootfs)
via SSH, but parsing locally for faster operation
- compatible with BusyBox shell, not only bash
Usability improvements:
- flexible command line (uses getopts for parsing)
- detailed help text
- flag to enable detailed debug logging
- graphviz output format detected from file extension, not hard coded
- a self-contained shell script
Usage is designed to be simple:
dapm-grpah -c CARD - get state from debugfs for CARD
dapm-grpah -c CARD -r REMOTE_TARGET - same, but remotely via SSH
dapm-grpah -d STATE_DIR - from a local copy of the debugfs
tree for a card
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Reviewed-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20240416-vizdapm-ng-v1-3-5d33c0b57bc5@bootlin.com
Signed-off-by: Mark Brown <broonie@kernel.org>
To make the widget debugfs files more informative, add a line showing the
widget type string.
Keeping backward compatibility is nice to have being debugfs, and ease of
parsing by both humans and software is also good. To maximize both with a
reasonable effort add a new line without thouching the already complex
format of the first line. The syntax is meant to be a key/value pair.
The existing vizdapm tool continues working after this change, ignoring the
new line.
The new format is:
Left ADC: Off in 1 out 0 - R2(0x2) mask 0x2
stream Left HiFi Capture inactive
widget-type adc
out "static" "Capture" "cs42l51.0-004a"
in "static" "Left PGA" "cs42l51.0-004a"
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Reviewed-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20240416-vizdapm-ng-v1-2-5d33c0b57bc5@bootlin.com
Signed-off-by: Mark Brown <broonie@kernel.org>
debugfs entries for DAPM widgets have the following form:
Left ADC: Off in 1 out 0 - R2(0x2) mask 0x2
stream Left HiFi Capture inactive
out "static" "Capture"
in "static" "Left PGA"
Lines with the "in" and "out" prefixes describe routes from/to other
widgets presenting the path name and the connected widget name.
This is ambiguous in case of cards having multiple widgets with the same
name in different components. For example the STM32MP157A-DK1 board
(arch/arm/boot/dts/st/stm32mp15xx-dkx.dtsi) has a "Capture" widget in both
the "cs42l51.0-004a" and the "hdmi-audio-codec.1.auto" components.
Avoid the ambiguity by adding the component name to the "in" and "out"
lines. Add the new field at the end to minimize backward compatibility
issues. The existing vizdapm tool continues working after this change.
The output becomes:
Left ADC: Off in 1 out 0 - R2(0x2) mask 0x2
stream Left HiFi Capture inactive
out "static" "Capture" "cs42l51.0-004a"
in "static" "Left PGA" "cs42l51.0-004a"
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Reviewed-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20240416-vizdapm-ng-v1-1-5d33c0b57bc5@bootlin.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Convert txt binding of marvell armada 3700 SoC spi controller to dtschema
to allow for validation.
Signed-off-by: Kousik Sanagavarapu <five231003@gmail.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20240417052729.6612-1-five231003@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Change the original fixed delay to the assignment from the property.
It will make it more flexible to different platforms to avoid pop
noise at the beginning of recording.
Signed-off-by: Seven Lee <wtli@nuvoton.com>
Link: https://lore.kernel.org/r/20240415070649.3496487-3-wtli@nuvoton.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Change the original fixed delay to the assignment from the property. It
will make it more flexible to different platforms to avoid pop noise at
the beginning of recording.
Signed-off-by: Seven Lee <wtli@nuvoton.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/r/20240415070649.3496487-2-wtli@nuvoton.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Freeing key cache items is a multi stage process; we need to wait for an
SRCU grace period to elapse, and we handle this ourselves - partially to
avoid callback overhead, but primarily so that when allocating we can
first allocate from the freed items waiting for an SRCU grace period.
Previously, the shrinker was counting the items on the 'waiting for SRCU
grace period' lists as items being scanned, but this meant that too many
items waiting for an SRCU grace period could prevent it from doing any
work at all.
After this, we're seeing that items skipped due to the accessed bit are
the main cause of the shrinker not making any progress, and we actually
want the key cache shrinker to run quite aggressively because reclaimed
items will still generally be found (more compactly) in the btree node
cache - so we also tweak the shrinker to not count those against
nr_to_scan.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
this stores the SRCU sequence number, which we use to check if an SRCU
barrier has elapsed; this is a partial fix for the key cache shrinker
not actually freeing.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
-----BEGIN PGP SIGNATURE-----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=EMuq
-----END PGP SIGNATURE-----
Merge tag 'block-6.9-20240420' of git://git.kernel.dk/linux
Pull block fixes from Jens Axboe:
"Just two minor fixes that should go into the 6.9 kernel release, one
fixing a regression with partition scanning errors, and one fixing a
WARN_ON() that can get triggered if we race with a timer"
* tag 'block-6.9-20240420' of git://git.kernel.dk/linux:
blk-iocost: do not WARN if iocg was already offlined
block: propagate partition scanning errors to the BLKRRPART ioctl
Signed-off-by: James E.J. Bottomley <James.Bottomley@HansenPartnership.com>
-----BEGIN PGP SIGNATURE-----
iJwEABMIAEQWIQTnYEDbdso9F2cI+arnQslM7pishQUCZiO5FiYcamFtZXMuYm90
dG9tbGV5QGhhbnNlbnBhcnRuZXJzaGlwLmNvbQAKCRDnQslM7pishRZwAQCWHVE/
KliOKbwdMaOLCE5MERmQVkBaBoSXPSjZix62lgEA2dOxVqKWN9ULJ2BrrS6cbGCW
e51gzItgpOwMsAvm9XE=
=FBiC
-----END PGP SIGNATURE-----
Merge tag 'email' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull email address update from James Bottomley:
"My IBM email has stopped working, so update to a working email
address"
* tag 'email' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
MAINTAINERS: update to working email address
Enable the sound machine driver for Qualcomm X1E80100 sound card, used
on several boards with X1E80100 (e.g. X1E80100 CRD).
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20240403094422.15140-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
without OBJECT_FILES_NON_STANDARD. This fixes a warning
"Unpatched return thunk in use. This should not happen!" when running
KVM selftests.
* Fix a mostly benign bug in the gfn_to_pfn_cache infrastructure where KVM
would allow userspace to refresh the cache with a bogus GPA. The bug has
existed for quite some time, but was exposed by a new sanity check added in
6.9 (to ensure a cache is either GPA-based or HVA-based).
* Drop an unused param from gfn_to_pfn_cache_invalidate_start() that got left
behind during a 6.9 cleanup.
* Fix a math goof in x86's hugepage logic for KVM_SET_MEMORY_ATTRIBUTES that
results in an array overflow (detected by KASAN).
* Fix a bug where KVM incorrectly clears root_role.direct when userspace sets
guest CPUID.
* Fix a dirty logging bug in the where KVM fails to write-protect SPTEs used
by a nested guest, if KVM is using Page-Modification Logging and the nested
hypervisor is NOT using EPT.
x86 PMU:
* Drop support for virtualizing adaptive PEBS, as KVM's implementation is
architecturally broken without an obvious/easy path forward, and because
exposing adaptive PEBS can leak host LBRs to the guest, i.e. can leak
host kernel addresses to the guest.
* Set the enable bits for general purpose counters in PERF_GLOBAL_CTRL at
RESET time, as done by both Intel and AMD processors.
* Disable LBR virtualization on CPUs that don't support LBR callstacks, as
KVM unconditionally uses PERF_SAMPLE_BRANCH_CALL_STACK when creating the
perf event, and would fail on such CPUs.
Tests:
* Fix a flaw in the max_guest_memory selftest that results in it exhausting
the supply of ucall structures when run with more than 256 vCPUs.
* Mark KVM_MEM_READONLY as supported for RISC-V in set_memory_region_test.
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmYjdqcUHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroPNRAgAh1AdKBAWnq9bFN2Np1kSAcRAk3bs
REDq/0iD1T9TvIwEmE1lHaRuqvCSO15WW+DKvbs7TS8zA0DyY7X/x8sIIy5YzZ5C
bQ+JXiqk55OAj0sPskBpCvE5qEreuU8qAit57+8OseKWs57EICvJjrfsRnHlmIub
pgGas3I42LjIgsuZRr2kjv+GrvaiikW+wWK6sq3CvPzTtHV196d26AK5l4NOoLkY
0FTbBIYUSJ7wxs92xuTed5mZ7JFZdsa5DVMXF5MRZ9W6g2vZCLbqCNRddRhSAsl0
gKmqZkuPTB7AnGQbJ2h/aKFT0ydsguzqbbKq62sK7ft5f1CUlbp9luDC9w==
=99rq
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull kvm fixes from Paolo Bonzini:
"This is a bit on the large side, mostly due to two changes:
- Changes to disable some broken PMU virtualization (see below for
details under "x86 PMU")
- Clean up SVM's enter/exit assembly code so that it can be compiled
without OBJECT_FILES_NON_STANDARD. This fixes a warning "Unpatched
return thunk in use. This should not happen!" when running KVM
selftests.
Everything else is small bugfixes and selftest changes:
- Fix a mostly benign bug in the gfn_to_pfn_cache infrastructure
where KVM would allow userspace to refresh the cache with a bogus
GPA. The bug has existed for quite some time, but was exposed by a
new sanity check added in 6.9 (to ensure a cache is either
GPA-based or HVA-based).
- Drop an unused param from gfn_to_pfn_cache_invalidate_start() that
got left behind during a 6.9 cleanup.
- Fix a math goof in x86's hugepage logic for
KVM_SET_MEMORY_ATTRIBUTES that results in an array overflow
(detected by KASAN).
- Fix a bug where KVM incorrectly clears root_role.direct when
userspace sets guest CPUID.
- Fix a dirty logging bug in the where KVM fails to write-protect
SPTEs used by a nested guest, if KVM is using Page-Modification
Logging and the nested hypervisor is NOT using EPT.
x86 PMU:
- Drop support for virtualizing adaptive PEBS, as KVM's
implementation is architecturally broken without an obvious/easy
path forward, and because exposing adaptive PEBS can leak host LBRs
to the guest, i.e. can leak host kernel addresses to the guest.
- Set the enable bits for general purpose counters in
PERF_GLOBAL_CTRL at RESET time, as done by both Intel and AMD
processors.
- Disable LBR virtualization on CPUs that don't support LBR
callstacks, as KVM unconditionally uses
PERF_SAMPLE_BRANCH_CALL_STACK when creating the perf event, and
would fail on such CPUs.
Tests:
- Fix a flaw in the max_guest_memory selftest that results in it
exhausting the supply of ucall structures when run with more than
256 vCPUs.
- Mark KVM_MEM_READONLY as supported for RISC-V in
set_memory_region_test"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (30 commits)
KVM: Drop unused @may_block param from gfn_to_pfn_cache_invalidate_start()
KVM: selftests: Add coverage of EPT-disabled to vmx_dirty_log_test
KVM: x86/mmu: Fix and clarify comments about clearing D-bit vs. write-protecting
KVM: x86/mmu: Remove function comments above clear_dirty_{gfn_range,pt_masked}()
KVM: x86/mmu: Write-protect L2 SPTEs in TDP MMU when clearing dirty status
KVM: x86/mmu: Precisely invalidate MMU root_role during CPUID update
KVM: VMX: Disable LBR virtualization if the CPU doesn't support LBR callstacks
perf/x86/intel: Expose existence of callback support to KVM
KVM: VMX: Snapshot LBR capabilities during module initialization
KVM: x86/pmu: Do not mask LVTPC when handling a PMI on AMD platforms
KVM: x86: Snapshot if a vCPU's vendor model is AMD vs. Intel compatible
KVM: x86: Stop compiling vmenter.S with OBJECT_FILES_NON_STANDARD
KVM: SVM: Create a stack frame in __svm_sev_es_vcpu_run()
KVM: SVM: Save/restore args across SEV-ES VMRUN via host save area
KVM: SVM: Save/restore non-volatile GPRs in SEV-ES VMRUN via host save area
KVM: SVM: Clobber RAX instead of RBX when discarding spec_ctrl_intercepted
KVM: SVM: Drop 32-bit "support" from __svm_sev_es_vcpu_run()
KVM: SVM: Wrap __svm_sev_es_vcpu_run() with #ifdef CONFIG_KVM_AMD_SEV
KVM: SVM: Create a stack frame in __svm_vcpu_run() for unwinding
KVM: SVM: Remove a useless zeroing of allocated memory
...
- Fix wireguard loading failure on pre-Power10 due to Power10 crypto routines.
- Fix papr-vpd selftest failure due to missing variable initialization.
- Avoid unnecessary get/put in spapr_tce_platform_iommu_attach_dev().
Thanks to: Geetika Moolchandani, Jason Gunthorpe, Michal Suchánek, Nathan Lynch,
Shivaprasad G Bhat.
-----BEGIN PGP SIGNATURE-----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=AIMX
-----END PGP SIGNATURE-----
Merge tag 'powerpc-6.9-3' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc fixes from Michael Ellerman:
- Fix wireguard loading failure on pre-Power10 due to Power10 crypto
routines
- Fix papr-vpd selftest failure due to missing variable initialization
- Avoid unnecessary get/put in spapr_tce_platform_iommu_attach_dev()
Thanks to Geetika Moolchandani, Jason Gunthorpe, Michal Suchánek, Nathan
Lynch, and Shivaprasad G Bhat.
* tag 'powerpc-6.9-3' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
selftests/powerpc/papr-vpd: Fix missing variable initialization
powerpc/crypto/chacha-p10: Fix failure on non Power10
powerpc/iommu: Refactor spapr_tce_platform_iommu_attach_dev()
Define the USB-C orientation GPIOs so that the USB-C ports orientation
is known without having to resort to the altmode notifications.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20240409-hdk-orientation-gpios-v2-5-658efd993987@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>