There are a few leading spaces before tabs and remove it by running the
following commard:
$ find . -name '*.c' | xargs sed -r -i 's/^[ ]+\t/\t/'
$ find . -name '*.h' | xargs sed -r -i 's/^[ ]+\t/\t/'
Cc: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Hui Tang <tanghui20@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
There are a few leading spaces before tabs and remove it by running the
following commard:
$ find . -name '*.c' | xargs sed -r -i 's/^[ ]+\t/\t/'
$ find . -name '*.h' | xargs sed -r -i 's/^[ ]+\t/\t/'
Cc: "Gustavo A. R. Silva" <gustavoars@kernel.org>
Signed-off-by: Hui Tang <tanghui20@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
There are a few leading spaces before tabs and remove it by running the
following commard:
$ find . -name '*.c' | xargs sed -r -i 's/^[ ]+\t/\t/'
$ find . -name '*.h' | xargs sed -r -i 's/^[ ]+\t/\t/'
Cc: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Hui Tang <tanghui20@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
There are a few leading spaces before tabs and remove it by running the
following commard:
$ find . -name '*.c' | xargs sed -r -i 's/^[ ]+\t/\t/'
$ find . -name '*.h' | xargs sed -r -i 's/^[ ]+\t/\t/'
Cc: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: Hui Tang <tanghui20@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
There are a few leading spaces before tabs and remove it by running the
following commard:
$ find . -name '*.c' | xargs sed -r -i 's/^[ ]+\t/\t/'
$ find . -name '*.h' | xargs sed -r -i 's/^[ ]+\t/\t/'
Cc: Zheng Yongjun <zhengyongjun3@huawei.com>
Signed-off-by: Hui Tang <tanghui20@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
There are a few leading spaces before tabs and remove it by running the
following commard:
$ find . -name '*.c' | xargs sed -r -i 's/^[ ]+\t/\t/'
$ find . -name '*.h' | xargs sed -r -i 's/^[ ]+\t/\t/'
Cc: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Hui Tang <tanghui20@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
There are a few leading spaces before tabs and remove it by running the
following commard:
$ find . -name '*.c' | xargs sed -r -i 's/^[ ]+\t/\t/'
$ find . -name '*.h' | xargs sed -r -i 's/^[ ]+\t/\t/'
Cc: Sukadev Bhattiprolu <sukadev@linux.ibm.com>
Signed-off-by: Hui Tang <tanghui20@huawei.com>
Acked-by: Lijun Pan <lijunp213@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
There are a few leading spaces before tabs and remove it by running the
following commard:
$ find . -name '*.c' | xargs sed -r -i 's/^[ ]+\t/\t/'
$ find . -name '*.h' | xargs sed -r -i 's/^[ ]+\t/\t/'
Cc: "Alexander A. Klimov" <grandmaster@al2klimov.de>
Signed-off-by: Hui Tang <tanghui20@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
There are a few leading spaces before tabs and remove it by running the
following commard:
$ find . -name '*.c' | xargs sed -r -i 's/^[ ]+\t/\t/'
$ find . -name '*.h' | xargs sed -r -i 's/^[ ]+\t/\t/'
Signed-off-by: Hui Tang <tanghui20@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
There are a few leading spaces before tabs and remove it by running the
following commard:
$ find . -name '*.c' | xargs sed -r -i 's/^[ ]+\t/\t/'
$ find . -name '*.h' | xargs sed -r -i 's/^[ ]+\t/\t/'
Cc: Rohit Maheshwari <rohitm@chelsio.com>
Signed-off-by: Hui Tang <tanghui20@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
There are a few leading spaces before tabs and remove it by running the
following commard:
$ find . -name '*.c' | xargs sed -r -i 's/^[ ]+\t/\t/'
$ find . -name '*.h' | xargs sed -r -i 's/^[ ]+\t/\t/'
Cc: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: Hui Tang <tanghui20@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
There are a few leading spaces before tabs and remove it by running the
following commard:
$ find . -name '*.c' | xargs sed -r -i 's/^[ ]+\t/\t/'
$ find . -name '*.h' | xargs sed -r -i 's/^[ ]+\t/\t/'
Signed-off-by: Hui Tang <tanghui20@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
There are a few leading spaces before tabs and remove it by running the
following commard:
$ find . -name '*.c' | xargs sed -r -i 's/^[ ]+\t/\t/'
$ find . -name '*.h' | xargs sed -r -i 's/^[ ]+\t/\t/'
Signed-off-by: Hui Tang <tanghui20@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
There are a few leading spaces before tabs and remove it by running the
following commard:
$ find . -name '*.c' | xargs sed -r -i 's/^[ ]+\t/\t/'
$ find . -name '*.h' | xargs sed -r -i 's/^[ ]+\t/\t/'
Cc: Jes Sorensen <jes@trained-monkey.org>
Signed-off-by: Hui Tang <tanghui20@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
There are a few leading space before tabs and remove it by running the
following commard:
$ find . -name '*.c' | xargs sed -r -i 's/^[ ]+\t/\t/'
$ find . -name '*.h' | xargs sed -r -i 's/^[ ]+\t/\t/'
Cc: Steffen Klassert <klassert@kernel.org>
Signed-off-by: Hui Tang <tanghui20@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Use DEVICE_ATTR_RO helper instead of plain DEVICE_ATTR,
which makes the code a bit shorter and easier to read.
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Use kobj_to_dev() instead of container_of()
Generated by: scripts/coccinelle/api/kobj_to_dev.cocci
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Acked-by: Lijun Pan <lijunp213@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
data->ctrl_stats should be memset with correct size.
Fixes: bfad2b979d ("ethtool: add interface to read standard MAC Ctrl stats")
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Acked-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
The uapi_get_object() function returns error pointers, it never returns
NULL.
Fixes: 149d3845f4 ("RDMA/uverbs: Add a method to introspect handles in a context")
Link: https://lore.kernel.org/r/YJ6Got+U7lz+3n9a@mwanda
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
The sparse tool complains as follows:
kernel/bpf/syscall.c:4567:29: warning:
symbol 'bpf_sys_bpf_proto' was not declared. Should it be static?
kernel/bpf/syscall.c:4592:29: warning:
symbol 'bpf_sys_close_proto' was not declared. Should it be static?
This symbol is not used outside of syscall.c, so marks it static.
Signed-off-by: Pu Lehui <pulehui@huawei.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Song Liu <songliubraving@fb.com>
Link: https://lore.kernel.org/bpf/20210519064116.240536-1-pulehui@huawei.com
It counts how often cgroups are changed actually during the context
switches.
# perf stat -a -e context-switches,cgroup-switches -a sleep 1
Performance counter stats for 'system wide':
11,267 context-switches
10,950 cgroup-switches
1.015634369 seconds time elapsed
Committer notes:
The kernel patches landed in v5.13, but this entry wasn't filled in
perf's parse-events tables, which was leading to a segfault when running
'perf list' on a kernel with that feature, as reported by Thomas
Richter.
Also removed the part touching tools/include/uapi/linux/perf_event.h as
it was updated in the usual sync with the kernel UAPI headers, in a
previous, already upstream, patch.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Richter <tmricht@linux.ibm.com>
Link: http://lore.kernel.org/lkml/20210210083327.22726-3-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The put_user() and get_user() functions do checks on the address which is
passed to them. They check whether the address is actually a user-space
address and whether its fine to access it. They also call might_fault()
to indicate that they could fault and possibly sleep.
All of these checks are neither wanted nor needed in the #VC exception
handler, which can be invoked from almost any context and also for MMIO
instructions from kernel space on kernel memory. All the #VC handler
wants to know is whether a fault happened when the access was tried.
This is provided by __put_user()/__get_user(), which just do the access
no matter what. Also add comments explaining why __get_user() and
__put_user() are the best choice here and why it is safe to use them
in this context. Also explain why copy_to/from_user can't be used.
In addition, also revert commit
7024f60d65 ("x86/sev-es: Handle string port IO to kernel memory properly")
because using __get_user()/__put_user() fixes the same problem while
the above commit introduced several problems:
1) It uses access_ok() which is only allowed in task context.
2) It uses memcpy() which has no fault handling at all and is
thus unsafe to use here.
[ bp: Fix up commit ID of the reverted commit above. ]
Fixes: f980f9c31a ("x86/sev-es: Compile early handler code into kernel image")
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: stable@vger.kernel.org # v5.10+
Link: https://lkml.kernel.org/r/20210519135251.30093-4-joro@8bytes.org
When executing DEVX command to query QP object, we need to take the QP
type from the mlx5_ib_qp struct which hold the driver specific QP types as
well, such as DC.
Fixes: 34613eb1d2 ("IB/mlx5: Enable modify and query verbs objects via DEVX")
Link: https://lore.kernel.org/r/6eee15d63f09bb70787488e0cf96216e2957f5aa.1621413654.git.leonro@nvidia.com
Reviewed-by: Yishai Hadas <yishaih@nvidia.com>
Signed-off-by: Maor Gottlieb <maorg@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRAhzRXHqcMeLMyaSiRxhvAZXjcogUCYKT8wgAKCRCRxhvAZXjc
op2mAP9hyc3sp2/HvEuTYDc6LmljPNCqdKeCP1eiX5SZR0yMVwEAwR5xym7YeqYZ
LRj+xjuvOmrSNhcxpZqLpXuPOcY78wM=
=E4a/
-----END PGP SIGNATURE-----
Merge tag 'fs.idmapped.mount_setattr.v5.13-rc3' of gitolite.kernel.org:pub/scm/linux/kernel/git/brauner/linux
Pull mount_setattr fix from Christian Brauner:
"This makes an underlying idmapping assumption more explicit.
We currently don't have any filesystems that support idmapped mounts
which are mountable inside a user namespace, i.e. where s_user_ns !=
init_user_ns. That was a deliberate decision for now as userns root
can just mount the filesystem themselves.
Express this restriction explicitly and enforce it until there's a
real use-case for this. This way we can notice it and will have a
chance to adapt and audit our translation helpers and fstests
appropriately if we need to support such filesystems"
* tag 'fs.idmapped.mount_setattr.v5.13-rc3' of gitolite.kernel.org:pub/scm/linux/kernel/git/brauner/linux:
fs/mount_setattr: tighten permission checks
The RTL8231 GPIO and LED expander can be configured for use as an MDIO or SMI
bus device. Currently only the MDIO mode is supported, although SMI mode
support should be fairly straightforward, once an SMI bus driver is available.
Provided features by the RTL8231:
- Up to 37 GPIOs
- Configurable drive strength: 8mA or 4mA (currently unsupported)
- Input debouncing on high GPIOs (currently unsupported)
- Up to 88 LEDs in multiple scan matrix groups
- On, off, or one of six toggling intervals
- "single-color mode": 2×36 single color LEDs + 8 bi-color LEDs
- "bi-color mode": (12 + 2×6) bi-color LEDs + 24 single color LEDs
- Up to one PWM output (currently unsupported)
- Fixed duty cycle, 8 selectable frequencies (1.2kHz - 4.8kHz)
Register access is provided through a new MDIO regmap provider. The GPIO
controller uses gpio-regmap, although a patch is required to support a
limitation of the chip.
There remain some log warnings when probing the device, possibly due to the way
I'm using the MFD subsystem. Would it be possible to avoid these?
[ 2.602242] rtl8231-pinctrl: Failed to locate of_node [id: -2]
[ 2.609380] rtl8231-pinctrl rtl8231-pinctrl.0.auto: no of_node; not parsing pinctrl DT
When no 'leds' sub-node is specified:
[ 2.922262] rtl8231-leds: Failed to locate of_node [id: -2]
[ 2.967149] rtl8231-leds rtl8231-leds.1.auto: no of_node; not parsing pinctrl DT
[ 2.975673] rtl8231-leds rtl8231-leds.1.auto: scan mode missing or invalid
[ 2.983531] rtl8231-leds: probe of rtl8231-leds.1.auto failed with error -22
Changes since v1:
- Reintroduce MDIO regmap, with fixed Kconfig dependencies
- Add configurable dir/value order for gpio-regmap direction_out call
- Drop allocations for regmap fields that are used only on init
- Move some definitions to MFD header
- Add PM ops to replace driver remove for MFD
- Change pinctrl driver to (modified) gpio-regmap
- Change leds driver to use fwnode
Link: https://lore.kernel.org/lkml/cover.1620735871.git.sander@svanheule.net/
Changes since RFC:
- Dropped MDIO regmap interface. I was unable to resolve the Kconfig
dependency issue, so have reverted to using regmap_config.reg_read/write.
- Added pinctrl support
- Added LED support
- Changed root device to MFD, with pinctrl and leds child devices. Root
device is now an mdio_device driver.
Link: https://lore.kernel.org/linux-gpio/cover.1617914861.git.sander@svanheule.net/
Sander Vanheule (7):
regmap: Add MDIO bus support
gpio: regmap: Add configurable dir/value order
dt-bindings: leds: Binding for RTL8231 scan matrix
dt-bindings: mfd: Binding for RTL8231
mfd: Add RTL8231 core device
pinctrl: Add RTL8231 pin control and GPIO support
leds: Add support for RTL8231 LED scan matrix
.../bindings/leds/realtek,rtl8231-leds.yaml | 159 ++++++++
.../bindings/mfd/realtek,rtl8231.yaml | 202 ++++++++++
drivers/base/regmap/Kconfig | 6 +-
drivers/base/regmap/Makefile | 1 +
drivers/base/regmap/regmap-mdio.c | 57 +++
drivers/gpio/gpio-regmap.c | 20 +-
drivers/leds/Kconfig | 10 +
drivers/leds/Makefile | 1 +
drivers/leds/leds-rtl8231.c | 293 ++++++++++++++
drivers/mfd/Kconfig | 9 +
drivers/mfd/Makefile | 1 +
drivers/mfd/rtl8231.c | 153 +++++++
drivers/pinctrl/Kconfig | 11 +
drivers/pinctrl/Makefile | 1 +
drivers/pinctrl/pinctrl-rtl8231.c | 377 ++++++++++++++++++
include/linux/gpio/regmap.h | 3 +
include/linux/mfd/rtl8231.h | 57 +++
include/linux/regmap.h | 36 ++
18 files changed, 1393 insertions(+), 4 deletions(-)
create mode 100644 Documentation/devicetree/bindings/leds/realtek,rtl8231-leds.yaml
create mode 100644 Documentation/devicetree/bindings/mfd/realtek,rtl8231.yaml
create mode 100644 drivers/base/regmap/regmap-mdio.c
create mode 100644 drivers/leds/leds-rtl8231.c
create mode 100644 drivers/mfd/rtl8231.c
create mode 100644 drivers/pinctrl/pinctrl-rtl8231.c
create mode 100644 include/linux/mfd/rtl8231.h
base-commit: 6efb943b86
--
2.31.1
This patchset adds Amlogic SM1 support on the TOACODEC driver, first by switching
to regmap fields for some bit fields to avoid code duplication, and then by adding
the corresponding bits & struct for the SM1 changed bits.
Changes since v2 at [2]:
- use raw values instead of defines in REG_FIELD() for g12a_toacodec_match_data
Changes since v1 at [1]:
- switch to regmap field
[1] https://lore.kernel.org/r/20210429170147.3615883-1-narmstrong@baylibre.com
[2] https://lore.kernel.org/r/20210505072607.3815442-1-narmstrong@baylibre.com
Neil Armstrong (2):
ASoC: meson: g12a-toacodec: use regmap fields to prepare SM1 support
ASoC: meson: g12a-toacodec: add support for SM1 TOACODEC
sound/soc/meson/g12a-toacodec.c | 143 +++++++++++++++++++++++++++-----
1 file changed, 124 insertions(+), 19 deletions(-)
--
2.25.1
The variable ‘min_full_scale’ and function 'get_min_full_scales' are
not used, So delete them.
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Bixuan Cui <cuibixuan@huawei.com>
Link: https://lore.kernel.org/r/20210514085214.53941-1-cuibixuan@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
'if (true) { ... }' will always evaluate to true. Remove it and
save a few tabs for somewhere else.
Signed-off-by: Bryan Brattlof <hello@bryanbrattlof.com>
Link: https://lore.kernel.org/r/20210518144335.1677320-1-hello@bryanbrattlof.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
fixing:
CHECK: Alignment should match open parenthesis
#1351: FILE: drivers/staging/iio/addac/adt7316.c:1351:
CHECK: Alignment should match open parenthesis
#1378: FILE: drivers/staging/iio/addac/adt7316.c:1378:
Signed-off-by: Wang Qing <wangqing@vivo.com>
Link: https://lore.kernel.org/r/1621389170-5850-1-git-send-email-wangqing@vivo.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fixing the following checkpatch warning:
WARNING: please, no spaces at the start of a line
Signed-off-by: Jiabing Wan <kael_w@yeah.net>
Link: https://lore.kernel.org/r/20210518121735.88767-1-wanjiabing@vivo.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
_rtw_write_port() is being redefined as rtw_write_port(). Because
rtw_write_port() is the only name used in the driver, remove the
duplicate definition and rename the function from _rtw_write_port()
to rtw_write_port()
Signed-off-by: Bryan Brattlof <hello@bryanbrattlof.com>
Link: https://lore.kernel.org/r/5b8543127a774ca65595588711c05cce28b17bf6.1621361919.git-series.hello@bryanbrattlof.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
_rtw_write32() is redefined as rtw_write32() and
PlatformEFIOWrite4Byte(). Because rtw_write32() is the only name used in
the driver, remove the duplicate definitions and rename the function
from _rtw_write32() to rtw_write32()
Signed-off-by: Bryan Brattlof <hello@bryanbrattlof.com>
Link: https://lore.kernel.org/r/43917aee34e85139e613578cf6f14938211c8835.1621361919.git-series.hello@bryanbrattlof.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
_rtw_write16() is redefined as rtw_write16() and
PlatformEFIOWrite2Byte(). Because rtw_write16() is the only name used in
the driver, remove the duplicate definitions and rename the function
from _rtw_write16() to rtw_write16()
Signed-off-by: Bryan Brattlof <hello@bryanbrattlof.com>
Link: https://lore.kernel.org/r/7d53fb295f67f01c72640045afb88150391bce35.1621361919.git-series.hello@bryanbrattlof.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
_rtw_write8() is redefined as rtw_write8() and PlatformEFIOWrite1Byte().
Because rtw_write8() is the only name used in the driver, remove the
duplicate definitions and rename the function from _rtw_write8() to
rtw_write8()
Signed-off-by: Bryan Brattlof <hello@bryanbrattlof.com>
Link: https://lore.kernel.org/r/35ffc9cd5af7009b317361033a6ca5263307d61a.1621361919.git-series.hello@bryanbrattlof.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
_rtw_read32() is redefined as rtw_read32() and PlatformEFIORead4Byte().
Because rtw_read32() is the only name used in the driver, remove the
duplicate definitions and rename the function from _rtw_read32() to
rtw_read32()
Signed-off-by: Bryan Brattlof <hello@bryanbrattlof.com>
Link: https://lore.kernel.org/r/15956707341f76de683245c392063b8121a805ea.1621361919.git-series.hello@bryanbrattlof.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
_rtw_read16() is redefined as rtw_read16() and PlatformEFIORead2Byte().
Because rtw_read16() is the only name used in the driver, remove the
duplicate definitions and rename the function from _rtw_read16() to
rtw_read16()
Signed-off-by: Bryan Brattlof <hello@bryanbrattlof.com>
Link: https://lore.kernel.org/r/11458342572f21d9df58b3969ad1f16fdff157f4.1621361919.git-series.hello@bryanbrattlof.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
_rtw_read8() is redefined as rtw_read8() and PlatformEFIORead1Byte().
Because rtw_read8() is the only name used in the driver, remove the
duplicate definitions and rename the function from _rtw_read8() to
rtw_read8()
Signed-off-by: Bryan Brattlof <hello@bryanbrattlof.com>
Link: https://lore.kernel.org/r/9880c86c2aad7d95a714d8b03b28b83634f98c1e.1621361919.git-series.hello@bryanbrattlof.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The function parse_rx_slots is very longer. So move at least the message
parsing into a separate function to improve readability. In good case
the function returns the message payload length which is necessary to
move to the next message.
Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
Link: https://lore.kernel.org/r/1621105859-30215-19-git-send-email-stefan.wahren@i2se.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
There are a few statements which are unnecessary broken into multiple lines.
Let's join them into a single line to improve readability.
Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
Link: https://lore.kernel.org/r/1621105859-30215-18-git-send-email-stefan.wahren@i2se.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The function vchiq_shutdown_internal always returns VCHIQ_SUCCESS. So change
the return type to void and simplify the logic in vchiq_shutdown.
Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
Link: https://lore.kernel.org/r/1621105859-30215-17-git-send-email-stefan.wahren@i2se.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>