Make sure the HDA driver's display power reference is released during
shutdown/reboot.
During the shutdown/reboot sequence the pci device core calls the
pm_runtime_resume handler for all devices before calling the driver's
shutdown callback and so the HDA driver's runtime resume callback will
acquire a display power reference (on HSW/BDW). This triggers a power
reference held WARN on HSW/BDW in the i915 driver's subsequent shutdown
handler, which expects all display power references to be released by
that time.
Since the HDA controller is stopped in the shutdown handler in any case,
let's follow here the same sequence as the one during runtime suspend.
This will also reset the HDA link and drop the display power reference,
getting rid of the above WARN.
Tested on HSW.
v2:
- Fix the build for CONFIG_PM=n (Takashi)
- s/__azx_runtime_suspend/azx_shutdown_chip/
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/3618
References: https://lore.kernel.org/lkml/cea1f9a-52e0-b83-593d-52997fe1aaf6@er-systems.de
Reported-and-tested-by: Thomas Voegtle <tv@lio96.de>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://lore.kernel.org/r/20210623134601.2128663-1-imre.deak@intel.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
In preparation for FORTIFY_SOURCE performing compile-time and run-time
field array bounds checking for memcpy(), memmove(), and memset(),
avoid intentionally writing across neighboring fields.
Introduce more unions to cover the full inline data section, so that the
entire 256 bytes can be addressed by memcpy() without thinking it is
crossing field boundaries. Additionally adjusts dir memcpy() to use
existing union names to get the same coverage.
diffoscope shows there are no binary differences before/after excepting
the name of the initcall, which is line number based:
$ diffoscope --exclude-directory-metadata yes before/fs after/fs
--- before/fs
+++ after/fs
│ --- before/fs/jfs
├── +++ after/fs/jfs
│ │ --- before/fs/jfs/super.o
│ ├── +++ after/fs/jfs/super.o
│ │ ├── readelf --wide --symbols {}
│ │ │ @@ -2,15 +2,15 @@
│ │ │ Symbol table '.symtab' contains 158 entries:
│ │ │ Num: Value Size Type Bind Vis Ndx Name
...
│ │ │ - 5: 0000000000000000 0 NOTYPE LOCAL DEFAULT 6 __initcall__kmod_jfs__319_1049_ini
t_jfs_fs6
│ │ │ + 5: 0000000000000000 0 NOTYPE LOCAL DEFAULT 6 __initcall__kmod_jfs__319_1050_ini
t_jfs_fs6
...
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Dave Kleikamp <dave.kleikamp@oracle.com>
Fixes scripts/checkpatch.pl warning:
WARNING: Possible unnecessary 'out of memory' message
Remove it can help us save a bit of memory.
Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Signed-off-by: Dave Kleikamp <dave.kleikamp@oracle.com>
The TTL field indicates the level of page table walk holding the *leaf*
entry for the address being invalidated. But currently, the TTL field
may be set to an incorrent value in the following stack:
pte_free_tlb
__pte_free_tlb
tlb_remove_table
tlb_table_invalidate
tlb_flush_mmu_tlbonly
tlb_flush
In this case, we just want to flush a PTE page, but the tlb->cleared_pmds
is set and we get tlb_level = 2 in the tlb_get_level() function. This may
cause some unexpected problems.
This patch set the TTL field to 0 if tlb->freed_tables is set. The
tlb->freed_tables indicates page table pages are freed, not the leaf
entry.
Cc: <stable@vger.kernel.org> # 5.9.x
Fixes: c4ab2cbc1d ("arm64: tlb: Set the TTL field in flush_tlb_range")
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Reported-by: ZhuRui <zhurui3@huawei.com>
Signed-off-by: Zhenyu Ye <yezhenyu2@huawei.com>
Link: https://lore.kernel.org/r/b80ead47-1f88-3a00-18e1-cacc22f54cc4@huawei.com
Signed-off-by: Will Deacon <will@kernel.org>
Do not tear down the system when getting invalid status from a TPM chip.
This can happen when panic-on-warn is used.
Instead, introduce TPM_TIS_INVALID_STATUS bitflag and use it to trigger
once the error reporting per chip. In addition, print out the value of
TPM_STS for improved forensics.
Link: https://lore.kernel.org/keyrings/YKzlTR1AzUigShtZ@kroah.com/
Fixes: 55707d531a ("tpm_tis: Add a check for invalid status")
Cc: stable@vger.kernel.org
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Use DEFINE_RES_MEM() to save a couple of lines of code, which is simpler
and more readable. The start address does not need to appear twice.
Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
Fix the following make W=1 warnings:
drivers/char/tpm/tpm1-cmd.c:325: warning: expecting prototype for tpm_startup(). Prototype was for tpm1_startup() instead
drivers/char/tpm/tpm1-cmd.c:621: warning: expecting prototype for tpm_continue_selftest(). Prototype was for tpm1_continue_selftest() instead
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
The SPI core always reports a "MODALIAS=spi:<foo>", even if the device was
registered via OF. This means that this module won't auto-load if a DT has
for example has a node with a compatible "infineon,slb9670" string.
In that case kmod will expect a "MODALIAS=of:N*T*Cinfineon,slb9670" uevent
but instead will get a "MODALIAS=spi:slb9670", which is not present in the
kernel module aliases:
$ modinfo drivers/char/tpm/tpm_tis_spi.ko | grep alias
alias: of:N*T*Cgoogle,cr50C*
alias: of:N*T*Cgoogle,cr50
alias: of:N*T*Ctcg,tpm_tis-spiC*
alias: of:N*T*Ctcg,tpm_tis-spi
alias: of:N*T*Cinfineon,slb9670C*
alias: of:N*T*Cinfineon,slb9670
alias: of:N*T*Cst,st33htpm-spiC*
alias: of:N*T*Cst,st33htpm-spi
alias: spi:cr50
alias: spi:tpm_tis_spi
alias: acpi*:SMO0768:*
To workaround this issue, add in the SPI device ID table all the entries
that are present in the OF device ID table.
Reported-by: Alexander Wellbrock <a.wellbrock@mailbox.org>
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Tested-by: Peter Robinson <pbrobinson@gmail.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
While running a TPM2_CC_VERIFY_SIGNATURE operation with RSA 3072-bit
keys the TPM driver fails with the following error:
"kernel: [ 2416.187522] tpm tpm0: Operation Timed out"
Since the TPM PC Client specification does not specify a number for
verify signature operation timeout, and the duration of
TPM2_CC_VERIFY_SIGNATURE with RSA 3072-bit keys exceeds the current timeout
of TPM_LONG (2 seconds), it is preferable to pick the longest timeout
possible.
Therefore, set the duration for TPM2_CC_VERIFY_SIGNATUE to TPM_LONG_LONG
(5 minutes).
[jarkko@kernel.org: mangled the short summary a bit]
Link: https://trustedcomputinggroup.org/resource/pc-client-specific-platform-firmware-profile-specification/
Signed-off-by: Amir Mizinski <amirmizi6@gmail.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
disable_irq() after request_irq() still has a time gap in which
interrupts can come. request_irq() with IRQF_NO_AUTOEN flag will
disable IRQ auto-enable because of requesting.
Link: https://lore.kernel.org/patchwork/patch/1388765/
Signed-off-by: Tian Tao <tiantao6@hisilicon.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
In DSDT table, TPM _CID was SMO0768, and no _HID definition. After a
kernel upgrade from 4.19 to 5.10, TPM probe function was changed which
causes device probe fails. In order to make newer kernel to be
compatible with the older acpi definition, it would be best set default
probe function.
Signed-off-by: Liguang Zhang <zhangliguang@linux.alibaba.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
This is to simplify the code, and IOMEM_ERR_PTR(err) is same with
(__force void __iomem *)ERR_PTR(err).
Signed-off-by: Tian Tao <tiantao6@hisilicon.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
Trigger dynamic_ps_timer to re-evaluate power saving once a null
function packet (with PM = 1) is ACKed, otherwise dynamic PS is
not enabled at that point.
Signed-off-by: Bassem Dawood <bassem@morsemicro.com>
Link: https://lore.kernel.org/r/20210227055815.14838-1-bassem@morsemicro.com
[reformatting]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Opening a new file is done in 2 steps on regular filesystems:
1. Call the create inode-op on the parent-dir to create an inode
to hold the meta-data related to the file.
2. Call the open file-op to get a handle for the file.
vboxsf however does not really use disk-backed inodes because it
is based on passing through file-related system-calls through to
the hypervisor. So both steps translate to an open(2) call being
passed through to the hypervisor. With the handle returned by
the first call immediately being closed again.
Making 2 open calls for a single open(..., O_CREATE, ...) calls
has 2 problems:
a) It is not really efficient.
b) It actually breaks some apps.
An example of b) is doing a git clone inside a vboxsf mount.
When git clone tries to create a tempfile to store the pak
files which is downloading the following happens:
1. vboxsf_dir_mkfile() gets called with a mode of 0444 and succeeds.
2. vboxsf_file_open() gets called with file->f_flags containing
O_RDWR. When the host is a Linux machine this fails because doing
a open(..., O_RDWR) on a file which exists and has mode 0444 results
in an -EPERM error.
Other network-filesystems and fuse avoid the problem of needing to
pass 2 open() calls to the other side by using the atomic_open
directory-inode op.
This commit fixes git clone not working inside a vboxsf mount,
by adding support for the atomic_open directory-inode op.
As an added bonus this should also make opening new files faster.
The atomic_open implementation is modelled after the atomic_open
implementations from the 9p and fuse code.
Fixes: 0fd1695766 ("fs: Add VirtualBox guest shared folder (vboxsf) support")
Reported-by: Ludovic Pouzenc <bugreports@pouzenc.fr>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Factor out the code to create / release a struct vboxsf_handle into
2 new helper functions.
This is a preparation patch for adding atomic_open support.
Fixes: 0fd1695766 ("fs: Add VirtualBox guest shared folder (vboxsf) support")
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Make vboxsf_dir_create() optionally return the vboxsf-handle for
the created file. This is a preparation patch for adding atomic_open
support.
Fixes: 0fd1695766 ("fs: Add VirtualBox guest shared folder (vboxsf) support")
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Honor the excl flag to the dir-inode create op, instead of behaving
as if it is always set.
Note the old behavior still worked most of the time since a non-exclusive
open only calls the create op, if there is a race and the file is created
between the dentry lookup and the calling of the create call.
While at it change the type of the is_dir parameter to the
vboxsf_dir_create() helper from an int to a bool, to be consistent with
the use of bool for the excl parameter.
Fixes: 0fd1695766 ("fs: Add VirtualBox guest shared folder (vboxsf) support")
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Detailed description for this pull request:
1. Update extcon-sm5502 provider driver
- Convert devicetree binding document sytle with yaml
for extcon-sm5502.c and add support for SM5504 chip to extcon-sm5502.c.
- Use devm_regmap_add_irq_chip and probe_new for extcon-sm5502.c
2. Add missing modalias string for extcon-max8997.c.
3. Initialize the status data of extcon-intel-mrfld.c on probe time
in order to prevent the mismatch issue.
-----BEGIN PGP SIGNATURE-----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=RcdY
-----END PGP SIGNATURE-----
Merge tag 'extcon-next-for-5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/chanwoo/extcon into char-misc-next
Chanwoo writes:
Update extcon next for v5.14
Detailed description for this pull request:
1. Update extcon-sm5502 provider driver
- Convert devicetree binding document sytle with yaml
for extcon-sm5502.c and add support for SM5504 chip to extcon-sm5502.c.
- Use devm_regmap_add_irq_chip and probe_new for extcon-sm5502.c
2. Add missing modalias string for extcon-max8997.c.
3. Initialize the status data of extcon-intel-mrfld.c on probe time
in order to prevent the mismatch issue.
* tag 'extcon-next-for-5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/chanwoo/extcon:
extcon: sm5502: Add support for SM5504
extcon: sm5502: Refactor driver to use chip-specific struct
dt-bindings: extcon: sm5502: Document siliconmitus,sm5504-muic
dt-bindings: extcon: sm5502: Convert to DT schema
extcon: sm5502: Implement i2c_driver->probe_new()
extcon: sm5502: Use devm_regmap_add_irq_chip()
extcon: max8997: Add missing modalias string
extcon: sm5502: Drop invalid register write in sm5502_reg_data
extcon: intel-mrfld: Sync hardware and software state on init
The boolean variable may_have_irqs is not ininitialized and is
only being set to true in the case where chip is ROHM_CHIP_TYPE_BD9576.
Fix this by ininitialized may_have_irqs to false.
Addresses-Coverity: ("Uninitialized scalar variable")
Fixes: e7bf1fa58c ("regulator: bd9576: Support error reporting")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Acked-by: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>
Link: https://lore.kernel.org/r/20210622144730.22821-1-colin.king@canonical.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Use DIV_ROUND_UP to prevent truncation by integer division issue.
This ensures we return enough delay time.
Also fix returning negative value when new_sel < old_sel.
Signed-off-by: Axel Lin <axel.lin@ingics.com>
Link: https://lore.kernel.org/r/20210618141412.4014912-1-axel.lin@ingics.com
Signed-off-by: Mark Brown <broonie@kernel.org>
We have mgd_prepare_tx(), but sometimes drivers may want/need
to take action when the exchange finishes, whether successfully
or not.
Add a notification to the driver on completion, i.e. call the
new method mgd_complete_tx().
To unify the two scenarios, and to add more information, make
both of them take a struct that has the duration (prepare only),
subtype (both) and success (complete only).
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20210618133832.5d94e78f6230.I6dc979606b6f28701b740d7aab725f7853a5a155@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
If HE/6GHz is available (thus we consider dot11HE6GOptionImplemented
to be true), then always include the corresponding capability in the
probe request as required by the spec.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20210618133832.25ee4a54a7d0.I8cebd799c85524c8123a11941a104dbdefc03762@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
To discover a hidden AP on the 6GHz band, the probe request
sent to the AP needs to include the AP's SSID, as some APs
would not respond with a probe response based only on short
SSID match.
To support hidden AP discovery over the 6GHz band,
when constructing the specific 6GHz band scan also include
SSIDs that were part of the original scan request, so these
can be used in the probe requests transmitted during scan.
Signed-off-by: Ilan Peer <ilan.peer@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20210618133832.218df9d3203c.Ice0f7a2f6a65f1f9710b7898591481baeefaf490@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
When sending an association request, add any vendor specific
capabilities at the end of the frame. This way, mac80211 is
still completely in charge of building the frame, but drivers
can determine what should be added depending on the band and
interface type.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20210618133832.80d716d69a5f.I28097ff19be6b22aebdc33a72795d2662755d41f@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
There may be cases where vendor-specific elements need to be
used over the air. Rather than have driver or firmware add
them and possibly cause problems that way, add them to the
iftype-data band capabilities. This way we can advertise to
userspace first, and use them in mac80211 next.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20210618133832.e8c4f0347276.Iee5964682b3e9ec51fc1cd57a7c62383eaf6ddd7@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
We used to set regulatory info before the registration of
the device and then the regulatory info didn't get set, because
the device isn't registered so there isn't a device to set the
regulatory info for. So set the regulatory info after the device
registration.
Call reg_process_self_managed_hints() once again after the device
registration because it does nothing before it.
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20210618133832.c96eadcffe80.I86799c2c866b5610b4cf91115c21d8ceb525c5aa@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
While building probe requests, only enable HE capability if
there are actually any channels in the band with HE enabled,
otherwise we're not really capable. We're doing the same in
association requests, so doing it here makes it consistent.
This also makes HE not appear available if it isn't due to
regulatory constraints.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20210618133832.b5513f2af335.Ic01862678712ae4238cea43ad2185928865efad2@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Fixes scripts/checkpatch.pl warning:
WARNING: Possible unnecessary 'out of memory' message
Remove it can help us save a bit of memory.
Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Link: https://lore.kernel.org/r/20210617103141.1765-1-thunder.leizhen@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This adds support for TAS2505 and TAS2521 to the tlv320aic32x4 driver.
The TAS2505 seems to be a stripped down version of the TLV320AIC32X4 so
it makes sense to handle them in the same driver.
Signed-off-by: Claudius Heine <ch@denx.de>
Link: https://lore.kernel.org/r/20210617085230.1851503-3-ch@denx.de
Signed-off-by: Mark Brown <broonie@kernel.org>
While this driver can already handle different device variants, the
variant information cannot be used in the driver code and therefor
cannot have different code paths depending on the device variant.
This change adds a `type` value into the `aic32x4_priv` structure, that
contains a device variant identifier, which was set when the driver was
bound to the device.
Signed-off-by: Claudius Heine <ch@denx.de>
Link: https://lore.kernel.org/r/20210617085230.1851503-2-ch@denx.de
Signed-off-by: Mark Brown <broonie@kernel.org>
The current sun6i SPI implementation initializes the transfer too early,
resulting in SCK going high before the transfer. When using an additional
(gpio) chipselect with sun6i, the chipselect is asserted at a time when
clock is high, making the SPI transfer fail.
This is due to SUN6I_GBL_CTL_BUS_ENABLE being written into
SUN6I_GBL_CTL_REG at an early stage. Moving that to the transfer
function, hence, right before the transfer starts, mitigates that
problem.
Fixes: 3558fe900e (spi: sunxi: Add Allwinner A31 SPI controller driver)
Signed-off-by: Mirko Vogt <mirko-dev|linux@nanl.de>
Signed-off-by: Ralf Schlatterbeck <rsc@runtux.com>
Link: https://lore.kernel.org/r/20210614144507.y3udezjfbko7eavv@runtux.com
Signed-off-by: Mark Brown <broonie@kernel.org>
When system enter suspend, the machine driver suspend callback
function will be called, then the cpu driver trigger callback
(SNDRV_PCM_TRIGGER_SUSPEND) be called, it would disable the
interrupt.
But the machine driver suspend and cpu dai driver suspend order
maybe changed, the cpu dai driver's suspend callback is called before
machine driver's suppend callback, then the interrupt is not cleared
successfully in trigger callback.
So need to clear interrupts in cpu dai driver's suspend callback
to avoid such issue.
Fixes: 9cb2b3796e ("ASoC: fsl_spdif: Add pm runtime function")
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Link: https://lore.kernel.org/r/1624365084-7934-1-git-send-email-shengjiu.wang@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
