The omap_mbox_save_ctx() and omap_mbox_restore_ctx() API were
previously provided to OMAP mailbox clients to save and restore
the mailbox context during system suspend/resume. The save and
restore functionality is now implemented through System PM driver
callbacks, and there is no need for these functions, so kill these
API.
Signed-off-by: Suman Anna <s-anna@ti.com>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
The OMAP mailbox driver is used by clients to communicate with remote
processors in general. The mailbox clients are expected to have stopped
communicating with these remote processors during a system suspend. The
OMAP mailbox fifos are expected to not have any messages as such. Add a
check for any pending unprocessed messages in the suspend callback, to
detect any communication protocol issues of the mailbox clients. The
system suspend is aborted if any messages are found.
Signed-off-by: Suman Anna <s-anna@ti.com>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
Support has been added to the OMAP mailbox driver to allow it
to work across a system suspend/resume. The OMAP mailbox driver
requires only the interrupt configuration registers to be saved
and restored, and this is done in the suspend/resume callbacks.
The registers need to be saved only if there are active clients
at the time of suspend. The enabling and disabling of the mailbox
clocks is done automatically by the omap_device layer.
Signed-off-by: Suman Anna <s-anna@ti.com>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
The interrupt type used for identifying the layout of the interrupt
configuration registers between OMAP4+ SoCs and older SoCs is stored
only in the sub-mailbox structures for easier access. Store this type
in the the omap_mbox_device structure as well along with the other
global variables. This is being done to facilitate the context save
and restore of appropriate registers during system suspend/resume.
Signed-off-by: Suman Anna <s-anna@ti.com>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
Fix couple of checkpatch warnings of the type,
"WARNING: Missing a blank line after declarations"
Also, fixed a warning about a space after a typecast
while at this.
Signed-off-by: Suman Anna <s-anna@ti.com>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
Remove the paragraph about writing to the Free Software
Foundation's mailing address from the GPL license header
as this address can change. This fixes the corresponding
checkpatch warning.
Signed-off-by: Suman Anna <s-anna@ti.com>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
Fix the code formatting to use the kernel preferred style
of using the actual variables to determize the size using
the sizeof() operator. This fixes the corresponding checkpatch
warning as well.
Signed-off-by: Suman Anna <s-anna@ti.com>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
OMAP mailbox devices can no longer be created in legacy non-DT
mode, all the relevant code has been cleaned up. The OMAP mailbox
driver will only support devices created from DT going forward,
so drop the legacy platform device support from the driver.
Signed-off-by: Suman Anna <s-anna@ti.com>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
Checking the DMA config before setting the lli list avoids to do tests
inside the setting loop.
Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
Free fbdev CMA using drm_fbdev_cma_fini on unload. This fixes
a warning when unloading the driver:
WARNING: CPU: 0 PID: 164 at drivers/gpu/drm/drm_crtc.c:5930 drm_mode_config_cleanup+0x204/0x208
Signed-off-by: Stefan Agner <stefan@agner.ch>
The driver uses different variable names for struct drm_device
across functions which is confusing. Stick to the more common
variable name dev. While at it, remove unnecessary if statement
in error handling.
Signed-off-by: Stefan Agner <stefan@agner.ch>
If the device tree property fsl,panel is missing, drm_panel_attach
is called with a NULL pointer as first argument. Having a panel is
basically mandatory since RGB is the only supported connector.
Check if a panel node has been found, return -ENODEV and cleanup
otherwise.
Signed-off-by: Stefan Agner <stefan@agner.ch>
In the commit 1f9cd915b6 ("dmaengine: sun6i: Fix memcpy operation"),
the signed values returned by convert_burst() and convert_buswidth()
were stored in an unsigned value.
Then, these values were considered as errors when non null.
As a result, DMA transfers were rejected when the burst or buswidth
had values different from 1, as 8 for the burst or 4 for the bus width.
Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
The IRQ register number is computed, but this number was not used
and the register was the one indexed by the channel index instead.
Then, only the first DMA channel was working.
Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
In the current state, upon bus error the driver will spin endlessly,
relaunching the last tx, which will fail again and again :
- a bus error happens
- pxad_chan_handler() is called
- as PXA_DCSR_STOPSTATE is true, the last non-terminated transaction is
lauched, which is the one triggering the bus error, as it didn't
terminate
- moreover, the STOP interrupt fires a new, as the STOPIRQEN is still
active
Break this logic by stopping the automatic relaunch of a dma channel
upon a bus error, even if there are still pending issued requests on it.
As dma_cookie_status() seems unable to return DMA_ERROR in its current
form, ie. there seems no way to mark a DMA_ERROR on a per-async-tx
basis, it is chosen in this patch to remember on the channel which
transaction failed, and report it in pxad_tx_status().
It's a bit misleading because if T1, T2, T3 and T4 were queued, and T1
was completed while T2 causes a bus error, the status of T3 and T4 will
be reported as DMA_IN_PROGRESS, while the channel is actually stopped.
Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
The fsl-dcu driver copies a drm_mode_config object to its
stack but then only accesses a single member (dpms_property)
once. The data structure is large enough to trigger a warning
about the amount of kernel stack being used:
drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_rgb.c: In function 'fsl_dcu_drm_connector_create':
drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_rgb.c:182:1: error: the frame size of 1040 bytes is larger than 1024 bytes [-Werror=frame-larger-than=]
This changes the fsl_dcu_drm_connector_create() function to
only access the drm_mode_config by reference, which is also
more efficient.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Fixes: 109eee2f2a ("drm/layerscape: Add Freescale DCU DRM driver")
Signed-off-by: Stefan Agner <stefan@agner.ch>
Add driver for the TCON (timing controller) module. The TCON module
is a separate module attached after the DCU (display controller
unit). Each DCU instance has its own, directly connected TCON
instance. The DCU's RGB and timing signals are passing through
the TCON module. TCON can provide timing signals for raw TFT panels
or operate in a bypass mode which leaves all signals unaltered.
The driver currently only supports the bypass mode.
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Stefan Agner <stefan@agner.ch>
Use the common clock framework to calculate the pixel clock
dividier. The previous implementation rounded down the calculated
factor. Thanks to the CLK_DIVIDER_ROUND_CLOSEST flag using the
common clock framework divider implementation improves the pixel
clock accuracy in some cases. Ontop of that it also allows to see
the actual pixel clock in the sysfs clock summary.
Signed-off-by: Stefan Agner <stefan@agner.ch>
The Vybrid DCU variant has two independent clock inputs, one
for the registers (IPG bus clock) and one for the pixel clock.
Support this distinction in the DCU DRM driver while staying
backward compatible for old device trees.
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Stefan Agner <stefan@agner.ch>
Fix error handling during probe by reordering initialization and
adding a error path which disables clock again. Also disable the
clock on remove.
Signed-off-by: Stefan Agner <stefan@agner.ch>
updates to the fsl-mc node for full functionality:
-msi-parent is needed for interrupt support
-ranges is needed to enable the bus driver to translate bus addresses
-dpmac nodes provide a basis for relating dpmac objects to PHYs
Signed-off-by: Stuart Yoder <stuart.yoder@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
-The Freescale Management Complex and all associated objects
use message interrupts, and thus an msi-parent is required.
-Define a ranges property to specify the mapping between
the MC address space and the system address space.
-The fsl-mc node may optionally have dpmac sub-nodes that describe
the relationship between the Ethernet MACs which belong to the MC
and the Ethernet PHYs on the system board.
Signed-off-by: Stuart Yoder <stuart.yoder@nxp.com>
Acked-by: J. German Rivera <German.Rivera@nxp.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
In ext4, there is a race condition between changing inode journal mode
and ext4_writepages(). While ext4_writepages() is executed on a
non-journalled mode inode, the inode's journal mode could be enabled
by ioctl() and then, some pages dirtied after switching the journal
mode will be still exposed to ext4_writepages() in non-journaled mode.
To resolve this problem, we use fs-wide per-cpu rw semaphore by Jan
Kara's suggestion because we don't want to waste ext4_inode_info's
space for this extra rare case.
Signed-off-by: Daeho Jeong <daeho.jeong@samsung.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Jan Kara <jack@suse.cz>
The BA16 module has a PMIC that uses the WDOG_B output from iMX6 to
reset the system on a watchdog timeout. Configure the watchdog to assert
the external reset signal (WDOG_B) using fsl,ext-reset-output property.
Signed-off-by: Akshay Bhat <akshay.bhat@timesys.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
We already allocate delalloc blocks before changing the inode mode into
"per-file data journal" mode to prevent delalloc blocks from remaining
not allocated, but another issue concerned with "BH_Unwritten" status
still exists. For example, by fallocate(), several buffers' status
change into "BH_Unwritten", but these buffers cannot be processed by
ext4_alloc_da_blocks(). So, they still remain in unwritten status after
per-file data journaling is enabled and they cannot be changed into
written status any more and, if they are journaled and eventually
checkpointed, these unwritten buffer will cause a kernel panic by the
below BUG_ON() function of submit_bh_wbc() when they are submitted
during checkpointing.
static int submit_bh_wbc(int rw, struct buffer_head *bh,...
{
...
BUG_ON(buffer_unwritten(bh));
Moreover, when "dioread_nolock" option is enabled, the status of a
buffer is changed into "BH_Unwritten" after write_begin() completes and
the "BH_Unwritten" status will be cleared after I/O is done. Therefore,
if a buffer's status is changed into unwrutten but the buffer's I/O is
not submitted and completed, it can cause the same problem after
enabling per-file data journaling. You can easily generate this bug by
executing the following command.
./kvm-xfstests -C 10000 -m nodelalloc,dioread_nolock generic/269
To resolve these problems and define a boundary between the previous
mode and per-file data journaling mode, we need to flush and wait all
the I/O of buffers of a file before enabling per-file data journaling
of the file.
Signed-off-by: Daeho Jeong <daeho.jeong@samsung.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Jan Kara <jack@suse.cz>
The Kconfig for this support is currently declared with:
config MTD_UCLINUX
bool "Generic uClinux RAM/ROM filesystem support"
...meaning that it currently is not being built as a module by anyone.
Lets remove as much of the modular evidence that we can, so that when
reading the driver there is less doubt it is builtin-only.
Since module_init translates to device_initcall in the non-modular
case, the init ordering remains unchanged with this commit.
We also replace module.h with moduleparam.h since the file does use
a module_param, and leaving it as such is currently the easiest way
to remain compatible with existing boot arg use cases.
We also delete the MODULE_LICENSE tag etc. since all that information
was (or is now) contained at the top of the file in the comments.
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: Greg Ungerer <gerg@snapgear.com>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Brian Norris <computersforpeace@gmail.com>
The function jbd2_journal_extend() takes as its argument the number of
new credits to be added to the handle. We weren't taking into account
the currently unused handle credits; worse, we would try to extend the
handle by N credits when it had N credits available.
In the case where jbd2_journal_extend() fails because the transaction
is too large, when jbd2_journal_restart() gets called, the N credits
owned by the handle gets returned to the transaction, and the
transaction commit is asynchronously requested, and then
start_this_handle() will be able to successfully attach the handle to
the current transaction since the required credits are now available.
This is mostly harmless, but since ext4_ext_truncate_extend_restart()
returns EAGAIN, the truncate machinery will once again try to call
ext4_ext_truncate_extend_restart(), which will do the above sequence
over and over again until the transaction has committed.
This was found while I was debugging a lockup in caused by running
xfstests generic/074 in the data=journal case. I'm still not sure why
we ended up looping forever, which suggests there may still be another
bug hiding in the transaction accounting machinery, but this commit
prevents us from looping in the first place.
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Previously the LDB_DIx clocks could be specified in the ldb node. With
the ERR009219 errata fix applied, the ldb_di clocks now needs to be
specified in the clks node to ensure the clocks are setup early in the
boot process.
Signed-off-by: Akshay Bhat <akshay.bhat@timesys.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The default monitor that ships with B850v3 requires a 65MHz pixel clock.
65MHz can not be achieved using PLL3 (480MHz/7=68.5MHz). Hence set the
LDB_DIx clock source to PLL5. Since PLL5 is already in use by IPU1_DIx,
set the clock source for IPU1_DIx to PLL2_PFD2 to allow simultaneous
display on both LVDS and HDMI interface.
Signed-off-by: Akshay Bhat <akshay.bhat@timesys.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Remove ldb panel entry for the following reasons:
- The b850v3 has an onboard LVDS to DisplayPort converter (STDP4028). So
we should not limit the monitors that can be connected by hardcoding the
auo,b133htn01 1080p panel.
- The default resolution on the LVDS interface needs to be WXGA or less.
Otherwise when a 1080p monitor is connected to the HDMI port there is no
output on both the LVDS and HDMI ports since a single IPU on i.MX6 can
not handle two 1080p displays. With the panel entry removed from the
devicetree, drm driver defaults the resolution on LVDS interface to XGA.
Once in userspace, applications can set the desired resolution on LVDS
interface over IPU2 CRTC.
Signed-off-by: Akshay Bhat <akshay.bhat@timesys.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
As the event-fork option requires doing work when enabled and disabled, it
can not be passed down to created instances. The instance must clear this
flag when it is created, and must clear it when its removed.
As more options may be created with this need, a macro ZEROED_TRACE_FLAGS is
created that holds the flags that must not be inherited by the top level
instance, and must be cleared on removal of instances.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
The file atari_NCR5380.c has been removed from the tree so remove it
from the MAINTAINERS file as well.
While we are here, add the file dtc3x80.txt as it is only relevant to
the dtc driver.
Signed-off-by: Finn Thain <fthain@telegraphics.com.au>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Some drives set the ILI flag together with MEDIUM ERROR sense code.
Clear the ILI flag in this case so that the medium error will be
handled. The problem was reported by Maurizio Lombardi.
Signed-off-by: Kai Mäkisara <kai.makisara@kolumbus.fi>
Reviewed-by: Laurence Oberman <loberman@redhat.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Remove incorrect lockdep assertion from lpfc_sli_hbqbuf_find() which
acquires the hbalock itself. Fix the comment which resulted in this
mistake.
Fixes: 1c2ba475eb ("lpfc: Add lockdep assertions")
Signed-off-by: Sebastian Herbszt <herbszt@gmx.de>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Presumably it isn't possible to have empty lists here, but my static
checker doesn't know that and complains that "ep" can be used
uninitialized.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Nilesh Javali <nilesh.javali@qlogic.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
This has only called from show_sas_rphy_enclosure_identifier(). The
caller expects that we set an identifier, otherwise it uses an
uninitialized variable.
[mkp: fixed typo]
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Don Brace <don.brace@microsemi.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Firmware events are queued up using the fw_event_work's struct work, not
its delayed_work member. The initial driver for SAS2 controllers had
handled firmware reset using the rescan barrier and was later redesigned
through "mpt2sas: [Resend] Host Reset code cleanup". The delayed_work
variables are now unused and may provoke CONFIG_DEBUG_OBJECTS_TIMERS
"assert_init not available" false warnings in
_scsih_fw_event_cleanup_queue.
Cleanup fw_event_work's unused entries, update its kerneldoc, and
update _scsih_fw_event_cleanup_queue accordingly.
Fixes: 146b16c807 (mpt3sas: Refcount fw_events and fix unsafe list usage)
Signed-off-by: Joe Lawrence <joe.lawrence@stratus.com>
Acked-by: Chaitra P B <chaitra.basappa@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
blk_queue_split marks bio unmergeable, which makes sense for normal bio.
But if dispatching the bio to underlayer disk, the blk_queue_split
checks are invalid, hence it's possible the bio becomes mergeable.
In the reported bug, this bug causes trim against raid0 performance slash
https://bugzilla.kernel.org/show_bug.cgi?id=117051
Reported-and-tested-by: Park Ju Hyung <qkrwngud825@gmail.com>
Fixes: 6ac45aeb6bca(block: avoid to merge splitted bio)
Cc: stable@vger.kernel.org (v4.3+)
Cc: Ming Lei <ming.lei@canonical.com>
Cc: Neil Brown <neilb@suse.de>
Reviewed-by: Jens Axboe <axboe@fb.com>
Signed-off-by: Shaohua Li <shli@fb.com>
bio might have NOMERGE flag set, for example blk_queue_split sets it.
When we initiate request, copy this flag too.
Signed-off-by: Shaohua Li <shli@fb.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
Simply creating a file system on an skd device, followed by mount and
fstrim will result in errors in the logs and then a BUG(). Let's remove
discard support from that driver. As far as I can tell, it hasn't
worked right since it was merged. This patch also has a side-effect of
cleaning up an unintentional shadowed declaration inside of
skd_end_request.
I tested to ensure that I can still do I/O to the device using xfstests
./check -g quick. I didn't do anything more extensive than that,
though.
Signed-off-by: Jeff Moyer <jmoyer@redhat.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
Originally, idea was to use widget_type to identify jack_type.
However, suggestive way is to identify jack based on jack
attributes.
Changes already exists in codec FW to report jack attributes.
Signed-off-by: Vaibhav Agarwal <vaibhav.agarwal@linaro.org>
Reviewed-by: Mark Greer <mgreer@animalcreek.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
This fields actually populates jack attribute. Thus, renamed to
reflect the real purpose.
Signed-off-by: Vaibhav Agarwal <vaibhav.agarwal@linaro.org>
Reviewed-by: Mark Greer <mgreer@animalcreek.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
The ktime_get() can have a non negligeable overhead, use local_clock()
instead.
In order to test the difference between ktime_get() and local_clock(),
a quick hack has been added to trigger, via debugfs, 10000 times a
call to ktime_get() and local_clock() and measure the elapsed time.
Then the average value, the min and max is computed for each call.
From userspace, the test above was called 100 times every 2 seconds.
So, ktime_get() and local_clock() have been called 1000000 times in
total.
The results are:
ktime_get():
============
* average: 101 ns (stddev: 27.4)
* maximum: 38313 ns
* minimum: 65 ns
local_clock():
==============
* average: 60 ns (stddev: 9.8)
* maximum: 13487 ns
* minimum: 46 ns
The local_clock() is faster and more stable.
Even if it is a drop in the ocean, changing the ktime_get() by the
local_clock() allows to save 80ns at idle time (entry + exit). And
in some circumstances, especially when there are several CPUs racing
for the clock access, we save tens of microseconds.
The idle duration resulting from a diff is converted from nanosec to
microsec. This could be done with integer division (div 1000) - which is
an expensive operation or by 10 bits shifting (div 1024) - which is fast
but unprecise.
The following table gives some results at the limits.
------------------------------------------
| nsec | div(1000) | div(1024) |
------------------------------------------
| 1e3 | 1 usec | 976 nsec |
------------------------------------------
| 1e6 | 1000 usec | 976 usec |
------------------------------------------
| 1e9 | 1000000 usec | 976562 usec |
------------------------------------------
There is a linear deviation of 2.34%. This loss of precision is acceptable
in the context of the resulting diff which is used for statistics. These
ones are processed to guess estimate an approximation of the duration of the
next idle period which ends up into an idle state selection. The selection
criteria takes into account the next duration based on large intervals,
represented by the idle state's target residency.
The 2^10 division is enough because the approximation regarding the 1e3
division is lost in all the approximations done for the next idle duration
computation.
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
[ rjw: Subject ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
gb_activate_tx/rx is triggered from _prepare() & gb_deactivate
from shutdown(). This may cause protocol error in case shutdown
executes without _prepare due to some hw_params failure.
Also, reorganise _prepare & _shutdown calls to make it more
readable & cleaner.
Signed-off-by: Vaibhav Agarwal <vaibhav.agarwal@linaro.org>
Reviewed-by: Mark Greer <mgreer@animalcreek.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Update Makefile in response to SND_SOC_DYNAMIC_DAILINK cflag
removal.
Update files for msm-dynamic-dailink.h header file removal.
Update in response to API name changes. Also, acquire sound card
controls_rwsem before adding kcontrols to avoid deadlock.
Signed-off-by: Vaibhav Agarwal <vaibhav.agarwal@linaro.org>
Reviewed-by: Mark Greer <mgreer@animalcreek.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Pull ARM cpuidle changes for v4.7 from Daniel Lezcano.
* 'cpuidle/4.7' of http://git.linaro.org/people/daniel.lezcano/linux:
drivers: firmware: psci: use const and __initconst for psci_cpuidle_ops
soc: qcom: spm: Use const and __initconst for qcom_cpuidle_ops
ARM: cpuidle: constify return value of arm_cpuidle_get_ops()
ARM: cpuidle: add const qualifier to cpuidle_ops member in structures
