The xvYCC601/709 encodings were mapped by default to full range quantization.
This is actually wrong since these encodings use limited range quantization,
but accept values outside of the limited range.
This makes sense since for values within the limited range it behaves exactly
the same as BT.601 or Rec. 709. The only difference is that with the xvYCC
encodings the values outside of the limited range also produce value colors.
Talking to people who know a lot more about this than I do made me realize
that mapping xvYCC to full range quantization was wrong, so this patch corrects
this and also improves the documentation.
These formats are very rare, and since the formula for decoding these Y'CbCr
encodings is actually fixed and independent of the quantization field value
it is safe to make this change.
The main advantage is that keeps the V4L2 specification in sync with the
corresponding colorspace, HDMI and CEA861 standards when it comes to these
xvYCC formats.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
tw5864_frameinterval_get() only initializes its output when it successfully
identifies the video standard in tw5864_input. We get a warning here because
gcc can't always track the state if initialized warnings across a WARN()
macro, and thinks it might get used incorrectly in tw5864_s_parm:
media/pci/tw5864/tw5864-video.c: In function 'tw5864_s_parm':
media/pci/tw5864/tw5864-video.c:816:38: error: 'time_base.numerator' may be used uninitialized in this function [-Werror=maybe-uninitialized]
media/pci/tw5864/tw5864-video.c:819:31: error: 'time_base.denominator' may be used uninitialized in this function [-Werror=maybe-uninitialized]
Using dev_warn() instead of WARN() avoids the __branch_check__() in
unlikely and lets the compiler see that the initialization is correct.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Andrey Utkin <andrey.utkin@corp.bluecherry.net>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
We already check for the V4L2_EVENT_CTRL inside
v4l2_ctrl_subscribe_event() so just move this function to the default:
branch of the switch and let it does the job for us.
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
We already check for the V4L2_EVENT_CTRL inside
v4l2_ctrl_subscribe_event() so just move this fuction to the default:
branch of the switch and let it does the job for us.
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
We already check for the V4L2_EVENT_CTRL inside
v4l2_ctrl_subscribe_event() so just move this function to the default:
branch of the switch and let it does the job for us.
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.com>
Acked-by: Andrey Utkin <andrey.utkin@corp.bluecherry.net>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
We already check for the V4L2_EVENT_CTRL inside
v4l2_ctrl_subscribe_event() so just move the function to the default:
branch of the switch and let it does the job for us.
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.com>
Acked-by: Andrey Utkin <andrey.utkin@corp.bluecherry.net>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Simplify logic and call v4l2_ctrl_subscribe_event() directly instead
of copying its content over to ivtv_subscribe_event().
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Move the ret check to the right level under if (pb). It is not
used by the code before that point if pb is NULL.
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
drivers/media/platform/coda/coda-common.c: In function ‘coda_alloc_aux_buf’:
./include/linux/kern_levels.h:4:18: warning: format ‘%u’ expects argument of type ‘unsigned int’, but argument 4 has type ‘size_t {aka long unsigned int}’ [-Wformat=]
#define KERN_SOH "\001" /* ASCII Start Of Header */
^
./include/media/v4l2-common.h:69:9: note: in definition of macro ‘v4l2_printk’
printk(level "%s: " fmt, (dev)->name , ## arg)
^~~~~
./include/linux/kern_levels.h:10:18: note: in expansion of macro ‘KERN_SOH’
#define KERN_ERR KERN_SOH "3" /* error conditions */
^~~~~~~~
./include/media/v4l2-common.h:72:14: note: in expansion of macro ‘KERN_ERR’
v4l2_printk(KERN_ERR, dev, fmt , ## arg)
^~~~~~~~
drivers/media/platform/coda/coda-common.c:1341:3: note: in expansion of macro ‘v4l2_err’
v4l2_err(&dev->v4l2_dev,
^~~~~~~~
Hans wrote a similar patch, but it was fold with a Kconfig change.
So, I opted to keep my version.
Signed-off-by Hans Verkuil <hans.verkuil@cisco.com>
Acked-by Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Currently, IMX_VDOA and VIDEO_CODA only builds on ARCH_MXC.
That prevented me to build-test the driver, causing a bad patch
to be applied, and to see other warnings on this driver.
Hans wrote a similar patch, but his version was fold with a
warning fixup hunk.
So, I opted to keep my version.
Reported-by: Russell King <linux@armlinux.org.uk>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Signed-off-by Hans Verkuil <hans.verkuil@cisco.com>
Acked-by Philipp Zabel <p.zabel@pengutronix.de>
Some vars are not used, as warned by gcc:
drivers/media/platform/coda/coda-common.c: In function 'coda_buf_is_end_of_stream':
drivers/media/platform/coda/coda-common.c:816:20: warning: variable 'src_vq' set but not used [-Wunused-but-set-variable]
struct vb2_queue *src_vq;
^~~~~~
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Recently, an unfinished patch was merged that added a third entry to the
beginning of the array of firmware locations without changing the code
to also look at the third element, thus pushing an old firmware location
off the list.
Fixes: 8af7779f3c ("[media] coda: add Freescale firmware compatibility location")
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Acked-by: Baruch Siach <baruch@tkos.co.il>
Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
With reordering enabled, the sequence init in CODA960 firmware requests an
unreasonable number of internal frames for some baseline profile streams.
Disabling the reordering feature manually if baseline streams are detected
fixes this problem.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
The bitstream reader needs 512 bytes ready to read to examine the
headers in the first frame. If that frame is too small, prepend it
with a filler NAL.
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Keeping buffers filled into the bitstream on a temporary list instead of
immediately calling vb2_buffer_done on each of them immediately allows
start_streaming to correctly decide whether they should be marked as
done or requeued if an error occurs after the bitstream has been filled.
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
streamon and streamoff are used as boolean values, not as bitfields.
Therefore, the logical && should be used to combine them.
Signed-off-by: Michael Tretter <m.tretter@pengutronix.de>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
I don't know what the BWB unit is, I guess W is for write and one of the
Bs is for burst. All I know is that there repeatedly have been issues
with it hanging on certain streams (ENGR00223231, ENGR00293425), with
various firmware versions, sometimes blocking something related to the
GDI bus or the GDI AXI adapter. There are some error cases that we don't
know how to recover from without a reboot. Apparently this unit can be
disabled by setting bit 12 in the FRAME_MEM_CTRL mailbox register to
zero, so do that to avoid crashes.
Side effects are reduced burst lengths when writing out decoded frames
to memory, so there is an "enable_bwb" module parameter to turn it back
on.
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
There is no need to call v4l2_m2m_try_schedule to kick off draining the
bitstream buffer for the encoder, but we have to wake up the destination
queue in case there are no new OUTPUT buffers to be encoded and userspace
is already polling for new CAPTURE buffers.
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Without calling tc358743_set_csi after stopping streaming (or calling
tc358743_s_dv_timings or tc358743_set_fmt from userspace after stopping
the stream), the i.MX6 MIPI CSI2 input fails waiting for lanes to enter
STOP state when streaming is started again.
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
In the case of semi planar formats cb and cr are in the same plane
in memory, meaning that will be set to 'cb' whatever the format is,
and whatever the (packed) order of those components are.
Suggested-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Thibault Saunier <thibault.saunier@osg.samsung.com>
Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
Acked-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
The File handle is not yet added in the vdev list.So no need to call
v4l2_fh_del(&ctx->fh)if it fails to create control.
Signed-off-by: Shailendra Verma <shailendra.v@samsung.com>
Reviewed-by: Fabien Dessenne <fabien.dessenne@st.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
The device driver platform is actually written to during registration,
for setting the owner field, so platform_driver_register() does not
take a const pointer:
drivers/media/platform/coda/imx-vdoa.c: In function 'vdoa_driver_init':
drivers/media/platform/coda/imx-vdoa.c:333:213: error: passing argument 1 of '__platform_driver_register' discards 'const' qualifier from pointer target type [-Werror=discarded-qualifiers]
module_platform_driver(vdoa_driver);
In file included from drivers/media/platform/coda/imx-vdoa.c:22:0:
include/linux/platform_device.h:199:12: note: expected 'struct platform_driver *' but argument is of type 'const struct platform_driver *'
extern int __platform_driver_register(struct platform_driver *,
^~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/media/platform/coda/imx-vdoa.c: In function 'vdoa_driver_exit':
drivers/media/platform/coda/imx-vdoa.c:333:626: error: passing argument 1 of 'platform_driver_unregister' discards 'const' qualifier from pointer target type [-Werror=discarded-qualifiers]
Remove the modifier again.
Fixes: d2fe28feae ("[media] coda/imx-vdoa: constify structs")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
We have memory leaks of nf_conntrack_helper & expect_policy.
Signed-off-by: Jeffy Chen <jeffy.chen@rock-chips.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
We only allow runtime updates of expectation policies for timeout and
maximum number of expectations, otherwise reject the update.
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Acked-by: Liping Zhang <zlpnobody@gmail.com>
We want to select the GPIO_FTGPIO010 symbol for the generic
Faraday FTGPIO010 driver, not the old driver.
Cc: Jonas Jensen <jonas.jensen@gmail.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
The binding should state "cortina,gemini-gpio", "faraday,ftgpio010"
stating the full name of the IP part.
Cc: Jonas Jensen <jonas.jensen@gmail.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
This patch fixes issues for Intel INT3496 ACPI device as following:
- Propagate error code of gpiod_to_irq().
- Set the ID pin as the input direction if firmware has the bug
- Rename the gpio name for bining according to the documentation.
- Add gpio acpi mapping table and the dependency on X86.
- Use the devm_gpiod_get() instead of gpiod_get_index because of
acpi mapping table.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQIcBAABAgAGBQJY0kZcAAoJEJzN3yze689ToukP/0wSRpobMgasb32fwmP5nEPp
GP2b0reeLUMU44u3XTooGi/+88O2krCekyA98cmpFzgX/v1FE5q7lpUSmxq9ZqhK
Djrpb1hwhoe9cC8r87ytwlgVjFUYdwhEAhuE9vi1D/RNZWnbxTyxKe7F3O4O0SOg
5uiSvvSIldLUuv6l/Zyn3cdCZyAQ0SwCqGcWdRIMo9tEmpIZ1oqKHGFbradQVi3Y
6OMvjInbB6n3a0PxVP4ZMPyHW6En9KY/KgwQkc9u6nZSbFL810kEQn1/kTqG767h
ZkKsys/JM4RHGXOK/BP9JgxiuW3t18gApOA6hV48bYRMHUzJB8AU9YHek7WnAdDE
ZldOWMJz7wa/6mrvmaN0zaL0RLtaCbK+Afo2yGCb60ZIaawA8hrhLQtRaRYfTR1Y
MrdZ3iaagbi76oqZMcjHOfPCAZp+V5OiWEJ0OuUO0WJzamNjEwZeLXA2HkgCshK/
d8Ce2Y9heg6PMPfvEO9TmWJCtpXY4wOqi8iUlqr1EzL1ydXspIOVaPOJP8WWR2fG
HNYksvDjAvJP311GoIY+tKNwOhnBAPxQ6QzCslr4ft7My1PMniuO6jeLVuvqDb2Q
AH2ZhsTXA1QXIKhQySes00ldGmY8EuFDbDmtoybcvxUGDEprkvJlFntknM8vS6+x
h4iN+MEm14aa5urIxhlg
=agkm
-----END PGP SIGNATURE-----
Merge tag 'extcon-fixes-for-4.11-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/chanwoo/extcon into char-misc-linus
Chanwoo writes:
Update extcon for v4.11-rc3
This patch fixes issues for Intel INT3496 ACPI device as following:
- Propagate error code of gpiod_to_irq().
- Set the ID pin as the input direction if firmware has the bug
- Rename the gpio name for bining according to the documentation.
- Add gpio acpi mapping table and the dependency on X86.
- Use the devm_gpiod_get() instead of gpiod_get_index because of
acpi mapping table.
* core
- iio sw-device - ensure configfs is enabled both when building as module
and built in.
* ak8974
- drop incorrect __exit markup on remove.
* hid-sensor-trigger
- code reorganise to avoid losing settings if a power cycle occurs during S3.
* lsm6dsx
- fix incorrect overwrite of parts of FIFO_CTRL2 register during watermark
configuration.
* ti-am335x
- fix a hard to hit bug when reenabling from a fifo overrun by waiting for
current cycle to finish.
-----BEGIN PGP SIGNATURE-----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=WBtu
-----END PGP SIGNATURE-----
Merge tag 'iio-fixes-for-4.11c' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-linus
Jonathan writes:
Thirds set of IIO fixes for the 4.11 cycle.
* core
- iio sw-device - ensure configfs is enabled both when building as module
and built in.
* ak8974
- drop incorrect __exit markup on remove.
* hid-sensor-trigger
- code reorganise to avoid losing settings if a power cycle occurs during S3.
* lsm6dsx
- fix incorrect overwrite of parts of FIFO_CTRL2 register during watermark
configuration.
* ti-am335x
- fix a hard to hit bug when reenabling from a fifo overrun by waiting for
current cycle to finish.
dw-mmc got its reset-properties specified, so add the softresets
for it on the rk3399.
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Tested-by: Shawn Lin <shawn.lin@rock-chips.com>
Reviewed-by: Shawn Lin <shawn.lin@rock-chips.com>
dw-mmc got its reset-properties specified, so add the softresets
for it on the rk3368.
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Reviewed-by: Shawn Lin <shawn.lin@rock-chips.com>
I2S of RK3368 SoCs keep same as RK3066 SoCs found on Rockchip,
add nodes to support them.
Signed-off-by: Jianqun Xu <jay.xu@rock-chips.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Add dmac bus and dmac peri dts nodes for peripherals,
such as I2S, SPI, UART and so on.
Signed-off-by: Huibin Hong <huibin.hong@rock-chips.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
As reported by Lorenzo, the residency/latency values defined in the
idle-state for rk3368 "make no sense". When introducing them I
simply took the idle-state node from the vendor kernel in error
as I didn't look up if these values were sane in the first place.
Talking to people and determining why they were used in this way
showed that it was meant to make sure the cpu_suspend callback
got initialized which at the 3.10 time was somehow required even
for wfi-based idle handling.
Of course the generic arch_cpu_idle() now does wfi-based idle-handling
already and the rk3368 does not implement any other idle states than
the default WFI, so these wrong idle-states should go away.
Reported-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Acked-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
A good collection of outreachy related patches in here - mostly staging
driver cleanup. Also a fair number of patches added explicit OF device ID
tables for i2c drivers - a precursor to dropping (eventually) the implicit
probing.
New Device Support
* Allwinner SoC ADC.
- So far covers the sun4i-a10, sun5i-a13 and sun6i-a31 general purpose ADCs,
including thermal side of things.
This missed the last cycle due to my incompetence, so good to get in now,
particularly as various patches dependent on it are appearing.
* ltc2632
- new driver supporting ltc2632-l12, ltc2632-l10, ltc2632-l8, ltc2632-h12,
ltc-2632-h10, ltc-2632-h8 dacs
Cleanups
* Documentation
- drop a broken reference to i2c/trivial-devices
* ad2s1200
- drop & from function pointers for consistency.
* ad2s1210
- formatting fixes.
* ad7152
- octal permissions instead of symbolic.
- drop & from function pointers for consistent usage.
* ad7192
- drop & from function pointers for consistent usage.
* ad7280
- replace core mlock usage with a local lock as mlock is intended only to
protect the current device state (direct reads, or triggered and buffered)
* ad7746
- drop & from function pointers for consistent usage.
- replace core mlock usage with a local lock as mlock is intended only to
protect the current device state (direct reads, or triggered and buffered)
* ad7754
- move contents of header file into source file as not used anywhere else.
* ad7759
- move contents of header file into source file as not used anywhere else.
* ad7780
- drop & from function pointers for consistent usage.
* ad7832
- replace core mlock usage with a local lock as mlock is intended only to
protect the current device state (direct reads, or triggered and buffered)
* ad9834
- replace core mlock usage with a local lock as mlock is intended only to
protect the current device state (direct reads, or triggered and buffered)
- drop an unnecessary goto in favour of direct return.
* adis16060
- drop & from function pointers as inconsistent.
* adis16201
- drop a local mutex as the adis core already protects everything necessary.
- drop & from function pointers for consistent usage.
* adis16203
- drop & from function pointers for consistent usage.
* adis16209
- drop a local mutex as the adis core already protects everything necessary.
- use an enum for scan index giving slightly nicer code.
- drop & from function pointers for consistent usage.
* adis16240
- drop a local mutex as the adis core already protects everything necessary.
- use an enum for scan index giving slightly nicer code.
- drop & from function pointers for consistent usage.
* apds9960
- add OF device ID table.
* bma180
- add OF device ID table.
- prefer unsigned int to bare use of unsigned.
* bmc150_magn
- add OF device ID table.
* hmp03
- add OF device ID table.
* ina2xx
- add OF device ID table.
* itg3200
- add OF device ID table.
* mag3110
- add OF device ID table.
* max11100
- remove .owner field as it is set by the spi core.
* max5821
- add .of_match_table set to the ID table which was present but not used.
* mcp4725
- add OF device ID table.
* mlx96014
- add OF device ID table.
* mma7455
- add OF device ID table.
* mma7660
- add OF device ID table.
* mpl3115
- add OF device ID table.
* mpu6050
- add OF device ID table.
* pc104
- mask pc104 drivers behind a global pc104 config option.
* ti-ads1015
- add OF device ID table.
* tsl2563
- add OF device ID table.
* us5182d
- add OF device ID table.
-----BEGIN PGP SIGNATURE-----
iQJFBAABCAAvFiEEbilms4eEBlKRJoGxVIU0mcT0FogFAljRe1MRHGppYzIzQGtl
cm5lbC5vcmcACgkQVIU0mcT0Foh41xAAgVPrPnMF3vzHZADKbZRdvc0XPRoDl4Hf
6Z9sL+5hFNskwH2tPGxCDigz/RZA6gjB5XLxv+gA/UYPyiYSRnlLNeslzL0HSkPL
ACKN2f8mutzz0fJ9z5E14M7h+7y5/d3Chj3BmcCeVdHq900kgJaB0aJ7/YWEsvdj
HGwDvpMvOXzLnVTFTPmJLqryQVZun4kSlpUFxieQlsNNkfkwJS5owdj2R2z/P/y/
wNsUzeTmmACSbH2JLPrOd8krYnDnmP7xvkTUEfM5W4bOCI8sSRqlxKRseaWc4IPF
dyxujpwKave+Yq4evmZi9k/BMvq4a5pqKI0TsHoA+LdGWc9vILO6av1S0xa/bM/L
PAvjwPaDmJ9vfgUSQFsHLnYY2ZFF93Z1kGnGk28lwFKCcQT3qC0t9UjqBf1cyYuo
yXjotmKeqn9fjgZcUW3HT9vGr6TLROsd3zjgBvrUg0cuBcv2i04nADHEtITS4ZQx
oDgDqgxBbnbrjxM9DC91uPF8uMJRu+95OKjHe9p+MOzyg+BlquBjaIrg1XBsJpo/
229PSOjg/g3KeVDS4op6+kyTr2fhn0hFdgiUdXDlnKdsOAbB9mhr9uGHFM3wm5PF
CkXtHA2ke1ys9ygJzu/1FSKBZJhJRfcl46BUbO+Ea2VEvuTtKDXCTPeFD7vG5tHV
1s6OUVuaZHw=
=PwhQ
-----END PGP SIGNATURE-----
Merge tag 'iio-for-4.12b' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-next
Jonathan writes:
2nd set of new device support, features and cleanups for IIO in the 4.12 cycle
A good collection of outreachy related patches in here - mostly staging
driver cleanup. Also a fair number of patches added explicit OF device ID
tables for i2c drivers - a precursor to dropping (eventually) the implicit
probing.
New Device Support
* Allwinner SoC ADC.
- So far covers the sun4i-a10, sun5i-a13 and sun6i-a31 general purpose ADCs,
including thermal side of things.
This missed the last cycle due to my incompetence, so good to get in now,
particularly as various patches dependent on it are appearing.
* ltc2632
- new driver supporting ltc2632-l12, ltc2632-l10, ltc2632-l8, ltc2632-h12,
ltc-2632-h10, ltc-2632-h8 dacs
Cleanups
* Documentation
- drop a broken reference to i2c/trivial-devices
* ad2s1200
- drop & from function pointers for consistency.
* ad2s1210
- formatting fixes.
* ad7152
- octal permissions instead of symbolic.
- drop & from function pointers for consistent usage.
* ad7192
- drop & from function pointers for consistent usage.
* ad7280
- replace core mlock usage with a local lock as mlock is intended only to
protect the current device state (direct reads, or triggered and buffered)
* ad7746
- drop & from function pointers for consistent usage.
- replace core mlock usage with a local lock as mlock is intended only to
protect the current device state (direct reads, or triggered and buffered)
* ad7754
- move contents of header file into source file as not used anywhere else.
* ad7759
- move contents of header file into source file as not used anywhere else.
* ad7780
- drop & from function pointers for consistent usage.
* ad7832
- replace core mlock usage with a local lock as mlock is intended only to
protect the current device state (direct reads, or triggered and buffered)
* ad9834
- replace core mlock usage with a local lock as mlock is intended only to
protect the current device state (direct reads, or triggered and buffered)
- drop an unnecessary goto in favour of direct return.
* adis16060
- drop & from function pointers as inconsistent.
* adis16201
- drop a local mutex as the adis core already protects everything necessary.
- drop & from function pointers for consistent usage.
* adis16203
- drop & from function pointers for consistent usage.
* adis16209
- drop a local mutex as the adis core already protects everything necessary.
- use an enum for scan index giving slightly nicer code.
- drop & from function pointers for consistent usage.
* adis16240
- drop a local mutex as the adis core already protects everything necessary.
- use an enum for scan index giving slightly nicer code.
- drop & from function pointers for consistent usage.
* apds9960
- add OF device ID table.
* bma180
- add OF device ID table.
- prefer unsigned int to bare use of unsigned.
* bmc150_magn
- add OF device ID table.
* hmp03
- add OF device ID table.
* ina2xx
- add OF device ID table.
* itg3200
- add OF device ID table.
* mag3110
- add OF device ID table.
* max11100
- remove .owner field as it is set by the spi core.
* max5821
- add .of_match_table set to the ID table which was present but not used.
* mcp4725
- add OF device ID table.
* mlx96014
- add OF device ID table.
* mma7455
- add OF device ID table.
* mma7660
- add OF device ID table.
* mpl3115
- add OF device ID table.
* mpu6050
- add OF device ID table.
* pc104
- mask pc104 drivers behind a global pc104 config option.
* ti-ads1015
- add OF device ID table.
* tsl2563
- add OF device ID table.
* us5182d
- add OF device ID table.
Used for Gru/Kevin only, as they're the only ones which have a described
CPU regulator. Also, I'm not sure we've validated this table non-Gru
boards.
At the same time, partially describe PWM regulators for Gru, so cpufreq
doesn't think it can crank up the clock speed without changing the
voltage. However, we don't yet have the DT bindings to fully describe
the Over Voltage Protection (OVP) circuits on these boards. Without that
description, we might end up changing the voltage too much, too fast.
Add the pwm-regulator descriptions and associate the CPU OPPs, but leave
them disabled.
Signed-off-by: Brian Norris <briannorris@chromium.org>
[shared gru/kevin parts on a gru device]
Tested-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
[with a bit of reordering]
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Kevin is part of a family of boards called Gru. As best as possible, the
properties shared by the Gru family are placed in rk3399-gru.dtsi, while
Kevin-specific bits are in rk3399-gru-kevin.dts. This does not add full
support for the base Gru board.
Working and tested (to some extent):
* EC support -- including keyboard, battery, PWM, and probably more
* UART / console
* Thermal
* Touchscreen
* Touchpad
* Digitizer (regulator still WIP)
* PCIe / Wifi
* Bluetooth / Webcam
* SD card
* eMMC
* USB2 on TypeC
- This works much of the time, but USB3 devices may or may not detect
properly. Waiting on proper extcon support for USB3 over TypeC.
- Depends on XHCI/DWC3 fixes for ARM64 that still haven't landed
* Backlight
Not working:
* CPUFreq -- relies on special OVP support for our PWM regulator
circuits
* EC / extcon support -- and with it, USB3/TypeC/DP
* DRM -- won't even build on ARM64, so all display, eDP, etc. is not
enabled
Not tested:
* Audio
Signed-off-by: Brian Norris <briannorris@chromium.org>
[shared gru/kevin parts on a gru device]
Tested-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
[with a bit of reordering]
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
When the separate IRQ stack was introduced, stack unwinding only
proceeded as far as the top of the IRQ stack, leading to kernel
backtraces being less useful, lacking the trace of what was interrupted.
Fix this by providing a means for the kernel to unwind the IRQ stack
onto the interrupted task stack. The processor state is saved to the
kernel task stack on interrupt. The IRQ_STACK_START macro reserves an
unsigned long at the top of the IRQ stack where the interrupted task
stack pointer can be saved. After the active stack is switched to the
IRQ stack, save the interrupted tasks stack pointer to the reserved
location.
Fix the stack unwinding code to look for the frame being the top of the
IRQ stack and if so get the next frame from the saved location. The
existing test does not work with the separate stack since the ra is no
longer pointed at ret_from_{irq,exception}.
The test to stop unwinding the stack 32 bytes from the top of a stack
must be modified to allow unwinding to continue up to the location of
the saved task stack pointer when on the IRQ stack. The low / high marks
of the stack are set depending on whether the sp is on an irq stack or
not.
Signed-off-by: Matt Redfearn <matt.redfearn@imgtec.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Marcin Nowakowski <marcin.nowakowski@imgtec.com>
Cc: Masanari Iida <standby24x7@gmail.com>
Cc: Chris Metcalf <cmetcalf@mellanox.com>
Cc: James Hogan <james.hogan@imgtec.com>
Cc: Paul Burton <paul.burton@imgtec.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jason A. Donenfeld <jason@zx2c4.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/15788/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Gru is a base dev board for a family of devices, including Kevin. Both
utilize Rockchip RK3399, and they share much of their design.
Signed-off-by: Brian Norris <briannorris@chromium.org>
Acked-by: Rob Herring <robh@kernel.org>
[added Samsung Chromebook Plus hint]
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Add the dwc3 usb needed node information for rk3399.
Signed-off-by: Brian Norris <briannorris@chromium.org>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Consider the following situation which has been found in a test setup:
Gateway B has claimed client C and gateway A has the same backbone
network as B. C sends a broad- or multicast to B and directly after
this packet decides to send another packet to A due to a better TQ
value. B will forward the broad-/multicast into the backbone as it is
the responsible gw and after that A will claim C as it has been
chosen by C as the best gateway. If it now happens that A claims C
before it has received the broad-/multicast forwarded by B (due to
backbone topology or due to some delay in B when forwarding the
packet) we get a critical situation: in the current code A will
immediately unclaim C when receiving the multicast due to the
roaming client scenario although the position of C has not changed
in the mesh. If this happens the multi-/broadcast forwarded by B
will be sent back into the mesh by A and we have looping packets
until one of the gateways claims C again.
In order to prevent this, unclaiming of a client due to the roaming
client scenario is only done after a certain time is expired after
the last claim of the client. 100 ms are used here, which should be
slow enough for big backbones and slow gateways but fast enough not
to break the roaming client use case.
Acked-by: Simon Wunderlich <sw@simonwunderlich.de>
Signed-off-by: Andreas Pape <apape@phoenixcontact.com>
[sven@narfation.org: fix conflicts with current version]
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
Some of the bla debug messages are extended and additional messages are
added for easier bla debugging. Some debug messages introduced with the
dat changes in prior patches of this patch series have been changed to
be more compliant to other existing debug messages.
Acked-by: Simon Wunderlich <sw@simonwunderlich.de>
Signed-off-by: Andreas Pape <apape@phoenixcontact.com>
[sven@narfation.org: fix conflicts with current version]
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
Additional dropping of unicast packets received from another backbone gw if
the same backbone network before being forwarded to the same backbone again
is necessary. It was observed in a test setup that in rare cases these
frames lead to looping unicast traffic backbone->mesh->backbone.
Signed-off-by: Andreas Pape <apape@phoenixcontact.com>
Acked-by: Simon Wunderlich <sw@simonwunderlich.de>
[sven@narfation.org: fix conflicts with current version]
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
If none of the backbone gateways in a bla setup has already knowledge of
the mac address searched for in an incoming ARP request from the backbone
an address resolution via the DHT of DAT is started. The gateway can send
several ARP requests to different DHT nodes and therefore can get several
replies. This patch assures that not all of the possible ARP replies are
returned to the backbone by checking the local DAT cache of the gateway.
If there is an entry in the local cache the gateway has already learned
the requested address and there is no need to forward the additional reply
to the backbone.
Furthermore it is checked if this gateway has claimed the source of the ARP
reply and only forwards it to the backbone if it has claimed the source or
if there is no claim at all.
Signed-off-by: Andreas Pape <apape@phoenixcontact.com>
Acked-by: Simon Wunderlich <sw@simonwunderlich.de>
[sven@narfation.org: fix conflicts with current version]
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
If dat is enabled it must be made sure that only the backbone gw which has
claimed the remote destination for the ARP request answers the ARP request
directly if the MAC address is known due to the local dat table. This
prevents multiple ARP replies in a common backbone if more than one
gateway already knows the remote mac searched for in the ARP request.
Signed-off-by: Andreas Pape <apape@phoenixcontact.com>
Acked-by: Simon Wunderlich <sw@simonwunderlich.de>
[sven@narfation.org: fix conflicts with current version]
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
With the new more strict ACPI gpio code the dsdt's IoRestriction
flags are honored on gpiod_get, but in some dsdt's it is wrong,
so explicitly call gpiod_direction_input on the id gpio if
necessary.
This fixes the following errors when the int3496 code is used
together with the new more strict ACPI gpio code:
[ 2382.484415] gpio gpiochip1: (INT33FF:01): gpiochip_lock_as_irq: tried to flag a GPIO set as output for IRQ
[ 2382.484425] gpio gpiochip1: (INT33FF:01): unable to lock HW IRQ 3 for IRQ
[ 2382.484429] genirq: Failed to request resources for INT3496:00 (irq 174) on irqchip chv-gpio
[ 2382.484518] intel-int3496 INT3496:00: can't request IRQ for USB ID GPIO: -22
[ 2382.500359] intel-int3496: probe of INT3496:00 failed with error -22
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Now that we've an acpi mapping table we should be using gpiod_get
instead of gpiod_get_index.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Add dependency on X86 so it doesn't show up on other arches and
add a option for compile test so it still gets build coverage.
Signed-off-by: Peter Robinson <pbrobinson@gmail.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
In order to make GPIO ACPI library stricter prepare users of
gpiod_get_index() to correctly behave when there no mapping is
provided by firmware.
Here we add explicit mapping between _CRS GpioIo() resources and
their names used in the driver.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
