Commit graph

691,473 commits

Author SHA1 Message Date
Michael Cree
bdc8b8914b alpha: Shift perf event pending work earlier in timer interrupt
Pending work from the performance event subsystem is executed in
the timer interrupt.  This patch shifts the call to
perf_event_do_pending() before the call to update_process_times()
as the latter may call back into the perf event subsystem and it
is prudent to have the pending work executed first.

Signed-off-by: Michael Cree <mcree@orcon.net.nz>
Signed-off-by: Matt Turner <mattst88@gmail.com>
2010-09-18 23:06:19 -04:00
Mikael Pettersson
531f0474bf alpha: wire up fanotify and prlimit64 syscalls
The 2.6.36-rc kernel added three new system calls:
fanotify_init, fanotify_mark, and prlimit64.  This
patch wires them up on Alpha.

Built and booted on an XP900.  Untested beyond that.

Signed-off-by: Mikael Pettersson <mikpe@it.uu.se>
Signed-off-by: Matt Turner <mattst88@gmail.com>
2010-09-18 23:06:19 -04:00
Arnd Bergmann
12e750d956 alpha: kill big kernel lock
All uses of the BKL on alpha are totally bogus, nothing
is really protected by this. Remove the remaining users
so we don't have to mark alpha as 'depends on BKL'.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Cc: linux-alpha@vger.kernel.org
Signed-off-by: Matt Turner <mattst88@gmail.com>
2010-09-18 23:06:18 -04:00
Tejun Heo
b97f897d60 alpha: fix build breakage in asm/cacheflush.h
Alpha SMP flush_icache_user_range() is implemented as an inline
function inside include/asm/cacheflush.h.  It dereferences @current
but doesn't include linux/sched.h and thus causes build failure if
linux/sched.h wasn't included previously.  Fix it by including the
needed header file explicitly.

Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Matt Turner <mattst88@gmail.com>
2010-09-18 23:06:18 -04:00
matt mooney
af96f8a340 alpha: remove unnecessary cast from void* in assignment.
Acked-by: Jan-Benedict Glaw <jbglaw@lug-owl.de>
Signed-off-by: matt mooney <mfm@muteddisk.com>
Signed-off-by: Matt Turner <mattst88@gmail.com>
2010-09-18 23:06:17 -04:00
Joe Perches
31019075f4 alpha: Use static const char * const where possible
Acked-by: Richard Henderson  <rth@twiddle.net>
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Matt Turner <mattst88@gmail.com>
2010-09-18 23:06:17 -04:00
Wu Fengguang
50aff04036 ocfs2/net: fix uninitialized ret in o2net_send_message_vec()
mmotm/fs/ocfs2/cluster/tcp.c: In function ‘o2net_send_message_vec’:
mmotm/fs/ocfs2/cluster/tcp.c:980:6: warning: ‘ret’ may be used uninitialized in this function

It seems a real bug introduced by commit 9af0b38ff3 (ocfs2/net:
Use wait_event() in o2net_send_message_vec()).

cc: Sunil Mushran <sunil.mushran@oracle.com>
Signed-off-by: Wu Fengguang <fengguang.wu@intel.com>
Signed-off-by: Joel Becker <joel.becker@oracle.com>
2010-09-18 08:48:54 -07:00
Chris Wilson
f899fc64cd drm/i915: use GMBUS to manage i2c links
Use the GMBUS interface rather than direct bit banging to grab the EDID
over DDC (and for other forms of auxiliary communication with external
display controllers). The hope is that this method will be much faster
and more reliable than bit banging for fetching EDIDs from buggy monitors
or through switches, though we still preserve the bit banging as a
fallback in case GMBUS fails.

Based on an original patch by Jesse Barnes.

Cc: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
2010-09-18 15:46:19 +01:00
Dominik Brodowski
7cdffc8652 pcmcia: preserve configuration information if request_io fails partly
If pcmcia_request_io() only fails partly -- for the second of two
requested resources -- preserve the configuration settings for the
first one.

Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2010-09-18 16:30:18 +02:00
Namhyung Kim
15e408cd6c futex: Add lock context annotations
queue_lock/unlock/me() and unqueue_me_pi() grab/release spinlocks
but are missing proper annotations. Add them.

Signed-off-by: Namhyung Kim <namhyung@gmail.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Darren Hart <dvhltc@us.ibm.com>
LKML-Reference: <1284468228-8723-3-git-send-email-namhyung@gmail.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2010-09-18 12:19:21 +02:00
Namhyung Kim
a3c74c5257 futex: Mark restart_block.futex.uaddr[2] __user
@uaddr and @uaddr2 fields in restart_block.futex are user
pointers. Add __user and remove unnecessary casts.

Signed-off-by: Namhyung Kim <namhyung@gmail.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Darren Hart <dvhltc@us.ibm.com>
LKML-Reference: <1284468228-8723-2-git-send-email-namhyung@gmail.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2010-09-18 12:19:21 +02:00
Namhyung Kim
1dcc41bb03 futex: Change 3rd arg of fetch_robust_entry() to unsigned int*
Sparse complains:
 kernel/futex.c:2495:59: warning: incorrect type in argument 3 (different signedness)

Make 3rd argument of fetch_robust_entry() 'unsigned int'.

Signed-off-by: Namhyung Kim <namhyung@gmail.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Darren Hart <dvhltc@us.ibm.com>
LKML-Reference: <1284468228-8723-1-git-send-email-namhyung@gmail.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2010-09-18 12:19:21 +02:00
Thomas Gleixner
995bd3bb5c x86: Hpet: Avoid the comparator readback penalty
Due to the overly intelligent design of HPETs, we need to workaround
the problem that the compare value which we write is already behind
the actual counter value at the point where the value hits the real
compare register. This happens for two reasons:

1) We read out the counter, add the delta and write the result to the
   compare register. When a NMI or SMI hits between the read out and
   the write then the counter can be ahead of the event already

2) The write to the compare register is delayed by up to two HPET
   cycles in certain chipsets.

We worked around this by reading back the compare register to make
sure that the written value has hit the hardware. For certain ICH9+
chipsets this can require two readouts, as the first one can return
the previous compare register value. That's bad performance wise for
the normal case where the event is far enough in the future.

As we already know that the write can be delayed by up to two cycles
we can avoid the read back of the compare register completely if we
make the decision whether the delta has elapsed already or not based
on the following calculation:

  cmp = event - actual_count;

If cmp is less than 8 HPET clock cycles, then we decide that the event
has happened already and return -ETIME. That covers the above #1 and
#2 problems which would cause a wait for HPET wraparound (~306
seconds).

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Nix <nix@esperi.org.uk>
Tested-by: Artur Skawina <art.08.09@gmail.com>
Cc: Damien Wyart <damien.wyart@free.fr>
Tested-by: John Drescher <drescherjm@gmail.com>
Cc: Venkatesh Pallipadi <venki@google.com>
Cc: Arjan van de Ven <arjan@linux.intel.com>
Cc: Andreas Herrmann <andreas.herrmann3@amd.com>
Tested-by: Borislav Petkov <borislav.petkov@amd.com>
Cc: Suresh Siddha <suresh.b.siddha@intel.com>
LKML-Reference: <alpine.LFD.2.00.1009151500060.2416@localhost6.localdomain6>
2010-09-18 12:09:13 +02:00
Eric Dumazet
04746ff128 qlcnic: dont assume NET_IP_ALIGN is 2
qlcnic driver allocates rx skbs and gives to hardware too bytes of extra
storage, allowing for corruption of kernel data.

NET_IP_ALIGN being 0 on some platforms (including x86), drivers should
not assume it's 2.

rds_ring->skb_size = rds_ring->dma_size + NET_IP_ALIGN;
...
skb = dev_alloc_skb(rds_ring->skb_size);
skb_reserve(skb, 2);
pci_map_single(pdev, skb->data, rds_ring->dma_size, PCI_DMA_FROMDEVICE);

(and rds_ring->skb_size == rds_ring->dma_size) -> bug


Because of extra alignment (1500 + 32) -> four extra bytes are available
before the struct skb_shared_info, so corruption is not noticed.

Note: this driver could use netdev_alloc_skb_ip_align()

Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-09-17 22:58:08 -07:00
Sosnowski, Maciej
4e8cec269d dca: disable dca on IOAT ver.3.0 multiple-IOH platforms
Direct Cache Access is not supported on IOAT ver.3.0 multiple-IOH platforms.
This patch blocks registering of dca providers when multiple IOH detected with IOAT ver.3.0.

Signed-off-by: Maciej Sosnowski <maciej.sosnowski@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-09-17 20:08:21 -07:00
Darius Augulis
4d89ecaae9 ARM: S3C64XX: Add IORESOURCE_IRQ_HIGHLEVEL flag to dm9000 on mach-real6410
Add IORESOURCE_IRQ_HIGHLEVEL irq flag to dm9000 driver
platform data in board mach-real6410.

Signed-off-by: Darius Augulis <augulis.darius@gmail.com>
[kgene.kim@samsung.com: minor title fix]
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2010-09-18 09:54:55 +09:00
Darius Augulis
591cd25ee3 ARM: S3C64XX: Fix coding style errors on mach-real6410
Fix errors reported by checkpatch.pl script

Signed-off-by: Darius Augulis <augulis.darius@gmail.com>
[kgene.kim@samsung.com: minor title fix]
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2010-09-18 09:54:55 +09:00
Mark Brown
5343795fda ARM: S3C64XX: Prototype SPI devices
Avoids build warnings due to the undeclared non-statics.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2010-09-18 09:54:54 +09:00
H. Peter Anvin
a68e5c94f7 x86, hotplug: Move WBINVD back outside the play_dead loop
On processors with hyperthreading, when only one thread is offlined
the other thread can cause a spurious wakeup on the idled thread.  We
do not want to re-WBINVD when that happens.

Ideally, we should simply skip WBINVD unless we're the last thread on
a particular core to shut down, but there might be similar issues
elsewhere in the system.

Thus, revert to previous behavior of only WBINVD outside the loop.
Partly as a result, remove the mb()'s around it: they are not
necessary since wbinvd() is a serializing instruction, but they were
intended to make sure the compiler didn't do any funny loop
optimizations.

Reported-by: Asit Mallick <asit.k.mallick@intel.com>
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
Cc: Arjan van de Ven <arjan@linux.kernel.org>
Cc: Len Brown <lenb@kernel.org>
Cc: Venkatesh Pallipadi <venki@google.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.hl>
LKML-Reference: <tip-ea53069231f9317062910d6e772cca4ce93de8c8@git.kernel.org>
2010-09-17 17:10:23 -07:00
Herbert Xu
f0f9deae9e netpoll: Disable IRQ around RCU dereference in netpoll_rx
We cannot use rcu_dereference_bh safely in netpoll_rx as we may
be called with IRQs disabled.  We could however simply disable
IRQs as that too causes BH to be disabled and is safe in either
case.

Thanks to John Linville for discovering this bug and providing
a patch.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-09-17 16:55:03 -07:00
Eric Dumazet
e6599c2ecf bonding: enable gro by default
gro can be enabled by default on bonding devices.

Actual support depends on the lower devices.

One can still use ethtool to switch off GRO if needed.

Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-09-17 16:53:24 -07:00
Ben Hutchings
07af7a2bfa ethtool: Add comments for valid use of flow types
Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-09-17 16:53:23 -07:00
Ben Hutchings
be2902daee ethtool, ixgbe: Move RX n-tuple mask fixup to ethtool
The ethtool utility does not set masks for flow parameters that are
not specified, so if both value and mask are 0 then this must be
treated as equivalent to a mask with all bits set.  Currently that is
done in the only driver that implements RX n-tuple filtering, ixgbe.
Move it to the ethtool core.

Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-09-17 16:53:23 -07:00
Vlad Yasevich
4bdab43323 sctp: Do not reset the packet during sctp_packet_config().
sctp_packet_config() is called when getting the packet ready
for appending of chunks.  The function should not touch the
current state, since it's possible to ping-pong between two
transports when sending, and that can result packet corruption
followed by skb overlfow crash.

Reported-by: Thomas Dreibholz <dreibh@iem.uni-due.de>
Signed-off-by: Vlad Yasevich <vladislav.yasevich@hp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-09-17 16:47:56 -07:00
David Lamparter
3b27e10555 netns: keep vlan slaves on master netns move
previously, if a vlan master device was moved from one network namespace
to another, all 802.1q and macvlan slaves were deleted.

we can use dev->reg_state to figure out whether dev_change_net_namespace
is happening, since that won't set dev->reg_state NETREG_UNREGISTERING.
so, this changes 8021q and macvlan to ignore NETDEV_UNREGISTER when
reg_state is not NETREG_UNREGISTERING.

Signed-off-by: David Lamparter <equinox@diac24.net>
Reviewed-by: "Eric W. Biederman" <ebiederm@xmission.com>
Acked-by: Daniel Lezcano <daniel.lezcano@free.fr>
Acked-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-09-17 16:46:04 -07:00
Giuseppe CAVALLARO
b71c7aaa1e stmmac: use one memset() to reset TDES01
Use one memset() to reset all TDES01 fields instead
of one by one to reduce number of instructions.

Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-09-17 16:12:58 -07:00
Giuseppe CAVALLARO
c629882ac7 stmmac: prevent dma init stuck in case of failures.
Add a limit when perform the DMA reset procedure
so, in case of problems (i.e. PHY reset failed) the
Kernel won't hang on the stmmac DMA initialisation
blocking the Kernels execution.

Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-09-17 16:12:57 -07:00
Giuseppe CAVALLARO
ebbb293f8b stmmac: consolidate and tidy-up the COE support
The first version of the driver had hard-coded the logic
for handling the checksum offloading.
This was designed according to the chips included in
the STM platforms where:
o MAC10/100 supports no COE at all.
o GMAC fully supports RX/TX COE.

This is not good for other chip configurations where,
for example, the mac10/100 supports the tx csum in HW
or when the GMAC has no IPC.

Thanks to Johannes Stezenbach; he provided me a first
draft of this patch that only reviewed the IPC for the
GMAC devices.

This patch also helps on SPEAr platforms where the
MAC10/100 can perform the TX csum in HW.
Thanks to Deepak SIKRI for his support on this.

In the end, GMAC devices for STM platforms have
a bugged Jumbo frame support that needs to have
the Tx COE disabled for oversized frames (due to
limited buffer sizes). This information is also
passed through the driver's platform structure.

Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com>
Signed-off-by: Johannes Stezenbach <js@sig21.net>
Signed-off-by: Deepak SIKRI <deepak.sikri@st.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-09-17 16:12:57 -07:00
Giuseppe CAVALLARO
dfb8fb96ae stmmac: add CSR Clock range selection
This patch adds the CSR Clock range selection.

Original patch from Johannes Stezenbach fixed the CSR
in the stmmac_mdio. We agreed to provide this through
the platform instead of.
Also thanks to Johannes for having tested it on ARM.

Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com>
Signed-off-by: Johannes Stezenbach <js@sig21.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-09-17 16:12:56 -07:00
H. Peter Anvin
ea53069231 x86, hotplug: Use mwait to offline a processor, fix the legacy case
The code in native_play_dead() has a number of problems:

1. We should use MWAIT when available, to put ourselves into a deeper
   sleep state.
2. We use the existence of CLFLUSH to determine if WBINVD is safe, but
   that is totally bogus -- WBINVD is 486+, whereas CLFLUSH is a much
   later addition.
3. We should do WBINVD inside the loop, just in case of something like
   setting an A bit on page tables.  Pointed out by Arjan van de Ven.

This code is based in part of a previous patch by Venki Pallipadi, but
unlike that patch this one keeps all the detection code local instead
of pre-caching a bunch of information.  We're shutting down the CPU;
there is absolutely no hurry.

This patch moves all the code to C and deletes the global
wbinvd_halt() which is broken anyway.

Originally-by: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
Reviewed-by: Arjan van de Ven <arjan@linux.intel.com>
Cc: Len Brown <lenb@kernel.org>
Cc: Venkatesh Pallipadi <venki@google.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.hl>
LKML-Reference: <20090522232230.162239000@intel.com>
2010-09-17 15:39:11 -07:00
H. Peter Anvin
bc83cccc76 x86, mwait: Move mwait constants to a common header file
We have MWAIT constants spread across three different .c files, for no
good reason.  Move them all into a common header file.

Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
Reviewed-by: Arjan van de Ven <arjan@linux.intel.com>
Cc: Len Brown <lenb@kernel.org>
LKML-Reference: <tip-*@git.kernel.org>
2010-09-17 15:36:40 -07:00
Jeff Layton
d3d4152a5d nfs: make sillyrename an async operation
A synchronous rename can be interrupted by a SIGKILL. If that happens
during a sillyrename operation, it's possible for the rename call to
be sent to the server, but the task exits before processing the
reply. If this happens, the sillyrenamed file won't get cleaned up
during nfs_dentry_iput and the server is left with a dangling .nfs* file
hanging around.

Fix this problem by turning sillyrename into an asynchronous operation
and have the task doing the sillyrename just wait on the reply. If the
task is killed before the sillyrename completes, it'll still proceed
to completion.

Signed-off-by: Jeff Layton <jlayton@redhat.com>
Reviewed-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2010-09-17 17:31:57 -04:00
Jeff Layton
779c51795b nfs: move nfs_sillyrename to unlink.c
...since that's where most of the sillyrenaming code lives. A comment
block is added to the beginning as well to clarify how sillyrenaming
works. Also, make nfs_async_unlink static as nfs_sillyrename is the only
caller.

Signed-off-by: Jeff Layton <jlayton@redhat.com>
Reviewed-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2010-09-17 17:31:30 -04:00
Jeff Layton
e8582a8b96 nfs: standardize the rename response container
Right now, v3 and v4 have their own variants. Create a standard struct
that will work for v3 and v4. v2 doesn't get anything but a simple error
and so isn't affected by this.

Signed-off-by: Jeff Layton <jlayton@redhat.com>
Reviewed-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2010-09-17 17:31:06 -04:00
Jeff Layton
920769f031 nfs: standardize the rename args container
Each NFS version has its own version of the rename args container.
Standardize them on a common one that's identical to the one NFSv4
uses.

Signed-off-by: Jeff Layton <jlayton@redhat.com>
Reviewed-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2010-09-17 17:30:25 -04:00
Andreas Herrmann
900f9ac9f1 x86, k8-gart: Decouple handling of garts and northbridges
So far we only provide num_k8_northbridges. This is required in
different areas (e.g. L3 cache index disable, GART). But not all AMD
CPUs provide a GART. Thus it is useful to split off the GART handling
from the generic caching of AMD northbridge misc devices.

Signed-off-by: Andreas Herrmann <andreas.herrmann3@amd.com>
LKML-Reference: <20100917160254.GC4958@loge.amd.com>
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2010-09-17 13:26:21 -07:00
Andreas Herrmann
3518dd14ca x86, cacheinfo: Fix dependency of AMD L3 CID
L3 cache index disable code uses PCI accesses to AMD northbridge functions.
Currently the code is #ifdef CONFIG_CPU_SUP_AMD.
But it should be #if (defined(CONFIG_CPU_SUP_AMD) && defined(CONFIG_PCI))
which in the end is a dependency to K8_NB.

Signed-off-by: Andreas Herrmann <andreas.herrmann3@amd.com>
LKML-Reference: <20100917160744.GF4958@loge.amd.com>
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2010-09-17 13:25:56 -07:00
Wey-Yi Guy
09f250ac8f iwlagn: initialize both tx/rx prio boost parameters
For config bt command, initialize both tx_prio_boost and
rx_prio_boost to "0".

Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2010-09-17 13:18:57 -07:00
Wey-Yi Guy
b345f4da42 iwlagn: minor coex API changes
Adding two new parameters in config bt API. these two parameters
use the 3 reserved bytes, so there is no structure size changes.

Make sure set both parameters to "zero" in order to preserve
previous behavior.

Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2010-09-17 13:18:49 -07:00
Wey-Yi Guy
1d270075be iwlagn: correct naming for failure reply tx status
For failure tx status 0x90 and 0x91, give the correct name to reflect
the errors.

Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2010-09-17 13:18:39 -07:00
Jay Sternberg
0b7e5e85b0 iwlwifi: corrections to debug output of ucode statistics
remove duplicate header and clean up format so it is defined once
making changes consolicated ensuring consistancy of output.
no function change to date displayed.

Signed-off-by: Jay Sternberg <jay.e.sternberg@intel.com>
Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2010-09-17 13:18:30 -07:00
Wey-Yi Guy
95b49ed013 iwlagn: adding aggregated frame failure status to debugfs
Addition to standard tx frame failure report, adding aggregated
frame failure report to debugfs

Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2010-09-17 13:18:17 -07:00
Wey-Yi Guy
814665fef7 iwlagn: keep track of aggregated tx frames failure counter
When uCode completed the aggregated frames transmission attempt,
it will send tx command response with aggregated frame status.

Keep track of the failure counter which help indicate any transmission
error condition.

Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2010-09-17 13:18:02 -07:00
Wey-Yi Guy
e1b3fa0c22 iwlagn: log aggregation tx command status
For aggregated frames with block ack, different status flag
will be used as part of tx command response.

Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2010-09-17 13:17:50 -07:00
Wey-Yi Guy
54a9aa65f7 iwlagn: keep track of failure tx status
Tx command response sent to host by uCode after completed
the transmission attempt. The status parameter indicates
whether the transmission was successful, or else why if failed.

Here we keep the counters to help understand the different failure
cases.

Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2010-09-17 13:17:36 -07:00
Wey-Yi Guy
91835ba401 iwlagn: keep track fail tx reason counter
If uCode fail to transmit frame, it will send reply tx back
to driver with failure status; keep the counters of each failure
cases for debugging.

Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2010-09-17 13:17:19 -07:00
Wey-Yi Guy
a437fbb96f iwlagn: add bt_status_read for 5150
Include bt_status_read function pointer for 5150 device

Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2010-09-17 13:17:05 -07:00
Wey-Yi Guy
7acc7c683a iwlwifi: do not perferm force reset while doing scan
When uCode error condition detected, driver try to perform either
rf reset or firmware reload in order bring device back to
working condition.

If rf reset is required and scan is in process, there is no need
to issue rf reset since scan already reset the rf.

If firmware reload is required and scan is in process, skip the
reload request. There is a possibility firmware reload during
scan cause problem.

[  485.804046] WARNING: at net/mac80211/main.c:310 ieee80211_restart_hw+0x28/0x62()
[  485.804049] Hardware name: Latitude E6400
[  485.804052] ieee80211_restart_hw called with hardware scan in progress
[  485.804054] Modules linked in: iwlagn iwlcore bnep sco rfcomm l2cap crc16 bluetooth [last unloaded: iwlcore]
[  485.804069] Pid: 812, comm: kworker/u:3 Tainted: G        W   2.6.36-rc3-wl+ #74
[  485.804072] Call Trace:
[  485.804079]  [<c103019a>] warn_slowpath_common+0x60/0x75
[  485.804084]  [<c1030213>] warn_slowpath_fmt+0x26/0x2a
[  485.804089]  [<c145da67>] ieee80211_restart_hw+0x28/0x62
[  485.804102]  [<f8b35dc6>] iwl_bg_restart+0x113/0x150 [iwlagn]
[  485.804108]  [<c10415d5>] process_one_work+0x181/0x25c
[  485.804119]  [<f8b35cb3>] ? iwl_bg_restart+0x0/0x150 [iwlagn]
[  485.804124]  [<c104190a>] worker_thread+0xf9/0x1f2
[  485.804128]  [<c1041811>] ? worker_thread+0x0/0x1f2
[  485.804133]  [<c10451b0>] kthread+0x64/0x69
[  485.804137]  [<c104514c>] ? kthread+0x0/0x69
[  485.804141]  [<c1002df6>] kernel_thread_helper+0x6/0x10
[  485.804145] ---[ end trace 3d4ebdc02d524bbb ]---
[  485.804148] WG> 1
[  485.804153] Pid: 812, comm: kworker/u:3 Tainted: G        W   2.6.36-rc3-wl+ #74
[  485.804156] Call Trace:
[  485.804161]  [<c145da9b>] ? ieee80211_restart_hw+0x5c/0x62
[  485.804172]  [<f8b35dcb>] iwl_bg_restart+0x118/0x150 [iwlagn]
[  485.804177]  [<c10415d5>] process_one_work+0x181/0x25c
[  485.804188]  [<f8b35cb3>] ? iwl_bg_restart+0x0/0x150 [iwlagn]
[  485.804192]  [<c104190a>] worker_thread+0xf9/0x1f2
[  485.804197]  [<c1041811>] ? worker_thread+0x0/0x1f2
[  485.804201]  [<c10451b0>] kthread+0x64/0x69
[  485.804205]  [<c104514c>] ? kthread+0x0/0x69
[  485.804209]  [<c1002df6>] kernel_thread_helper+0x6/0x10

Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2010-09-17 13:03:35 -07:00
Thomas Gleixner
448352ae72 MAINTAINERS: Add ARM Telechips maintainer
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2010-09-17 21:55:09 +02:00
Hans J. Koch
2aea73ce22 ARM: Add board support for Telechips TCC8000-SDK board
Add support for the Telechips TCC8000-SDK development board.

Signed-off-by: "Hans J. Koch" <hjk@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2010-09-17 21:55:09 +02:00