Commit graph

982,181 commits

Author SHA1 Message Date
Stephen Boyd
4d5c4ae329 Merge branches 'clk-socfpga', 'clk-mstar', 'clk-qcom' and 'clk-warnings' into clk-next
- PLL support on MStar/SigmaStar ARMv7 SoCs
 - CPU clks for Qualcomm SDX55
 - GCC and RPMh clks for Qualcomm SC8180x and SC7280 SoCs
 - GCC clks for Qualcomm SM8350
 - Video clk fixups on Qualcomm SM8250
 - GPU clks for Qualcomm SDM660/SDM630
 - Improvements for multimedia clks on Qualcomm MSM8998
 - Fix many warnings with W=1 enabled builds under drivers/clk/

* clk-socfpga:
  clk: socfpga: agilex: add clock driver for eASIC N5X platform
  dt-bindings: documentation: add clock bindings information for eASIC N5X

* clk-mstar:
  clk: mstar: msc313-mpll: Fix format specifier
  clk: mstar: Allow MStar clk drivers to be compile tested
  clk: mstar: MStar/SigmaStar MPLL driver
  clk: fixed: add devm helper for clk_hw_register_fixed_factor()
  dt-bindings: clk: mstar msc313 mpll binding description
  dt-bindings: clk: mstar msc313 mpll binding header

* clk-qcom: (42 commits)
  clk: qcom: Add Global Clock controller (GCC) driver for SC7280
  dt-bindings: clock: Add SC7280 GCC clock binding
  clk: qcom: rpmh: Add support for RPMH clocks on SC7280
  dt-bindings: clock: Add RPMHCC bindings for SC7280
  clk: qcom: gcc-sm8350: add gdsc
  dt-bindings: clock: Add QCOM SDM630 and SDM660 graphics clock bindings
  clk: qcom: Add SDM660 GPU Clock Controller (GPUCC) driver
  clk: qcom: mmcc-msm8996: Migrate gfx3d clock to clk_rcg2_gfx3d
  clk: qcom: rcg2: Stop hardcoding gfx3d pingpong parent numbers
  dt-bindings: clock: Add support for the SDM630 and SDM660 mmcc
  clk: qcom: Add SDM660 Multimedia Clock Controller (MMCC) driver
  clk: qcom: gcc-sdm660: Mark GPU CFG AHB clock as critical
  clk: qcom: gcc-sdm660: Mark MMSS NoC CFG AHB clock as critical
  clk: qcom: gpucc-msm8998: Allow fabia gpupll0 rate setting
  clk: qcom: gpucc-msm8998: Add resets, cxc, fix flags on gpu_gx_gdsc
  clk: qcom: gdsc: Implement NO_RET_PERIPH flag
  clk: qcom: mmcc-msm8998: Set bimc_smmu_gdsc always on
  clk: qcom: mmcc-msm8998: Add hardware clockgating registers to some clks
  clk: qcom: gcc-msm8998: Fix Alpha PLL type for all GPLLs
  clk: qcom: gcc-msm8998: Mark gpu_cfg_ahb_clk as critical
  ...

* clk-warnings: (27 commits)
  clk: zynq: clkc: Remove various instances of an unused variable 'clk'
  clk: versatile: clk-icst: Fix worthy struct documentation block
  clk: ti: gate: Fix possible doc-rot in 'omap36xx_gate_clk_enable_with_hsdiv_restore'
  clk: ti: dpll: Fix misnaming of '_register_dpll()'s 'user' parameter
  clk: ti: clockdomain: Fix description for 'omap2_init_clk_clkdm's hw param
  clk: st: clkgen-fsyn: Fix worthy struct documentation demote partially filled one
  clk: st: clkgen-pll: Demote unpopulated kernel-doc header
  clk: mvebu: ap-cpu-clk: Demote non-conformant kernel-doc header
  clk: socfpga: clk-pll-a10: Remove set but unused variable 'rc'
  clk: socfpga: clk-pll: Remove unused variable 'rc'
  clk: sifive: fu540-prci: Declare static const variable 'prci_clk_fu540' where it's used
  clk: bcm: clk-iproc-pll: Demote kernel-doc abuse
  clk: zynqmp: divider: Add missing description for 'max_div'
  clk: spear: Move prototype to accessible header
  clk: qcom: clk-rpm: Remove a bunch of superfluous code
  clk: clk-xgene: Add description for 'mask' and fix formatting for 'flags'
  clk: qcom: mmcc-msm8974: Remove unused static const tables 'mmcc_xo_mmpll0_1_2_gpll0{map}'
  clk: clk-npcm7xx: Remove unused static const tables 'npcm7xx_gates' and 'npcm7xx_divs_fx'
  clk: clk-fixed-mmio: Demote obvious kernel-doc abuse
  clk: qcom: gcc-ipq4019: Remove unused variable 'ret'
  ...
2021-02-16 14:09:24 -08:00
Stephen Boyd
11f83102d8 Merge branches 'clk-vc5', 'clk-silabs', 'clk-aspeed', 'clk-qoriq' and 'clk-rohm' into clk-next
- Support crystal load capacitance for Versaclock VC5
 - Add a "skip recall" DT binding for Silicon Labs' si570 to avoid glitches at boot

* clk-vc5:
  clk: vc5: Add support for optional load capacitance
  dt-bindings: clk: versaclock5: Add optional load capacitance property

* clk-silabs:
  clk: si570: Skip NVM to RAM recall operation if an optional property is set
  dt-bindings: clock: si570: Add 'silabs,skip-recall' property

* clk-aspeed:
  clk: aspeed: Fix APLL calculate formula from ast2600-A2

* clk-qoriq:
  clk: qoriq: use macros to generate pll_mask

* clk-rohm:
  clk: BD718x7: Do not depend on parent driver data
2021-02-16 14:09:12 -08:00
Stephen Boyd
242d8cf626 Merge branches 'clk-mediatek', 'clk-imx', 'clk-amlogic' and 'clk-at91' into clk-next
* clk-mediatek:
  clk: mediatek: mux: Update parent at enable time
  clk: mediatek: mux: Drop unused clock ops
  clk: mediatek: Select all the MT8183 clocks by default

* clk-imx:
  dt-bindings: clock: imx: Switch to my personal address
  MAINTAINERS: Add section for NXP i.MX clock drivers
  clk: imx: Move 'imx6sl_set_wait_clk()'s prototype out to accessible header
  clk: imx8mn: add clkout1/2 support
  clk: imx8mm: add clkout1/2 support
  clk: imx8mq: add PLL monitor output
  clk: imx: clk-imx31: Remove unused static const table 'uart_clks'
  clk: imx6q: demote warning about pre-boot ldb_di_clk reparenting
  clk: imx: clk-imx8qxp: Add some SCU clocks support for MIPI-LVDS subsystems
  clk: imx: clk-imx8qxp: Register DC0 display clocks with imx_clk_scu2()
  clk: imx: clk-imx8qxp: Add SCU clocks support for DC0 bypass clocks
  clk: imx: clk-imx8qxp: Add SCU clocks support for DC0 PLL clocks

* clk-amlogic:
  clk: meson: axg: Remove MIPI enable clock gate
  clk: meson-axg: remove CLKID_MIPI_ENABLE
  dt-bindings: clock: meson8b: remove non-existing clock macros
  clk: meson: meson8b: remove compatibility code for old .dtbs
  clk: meson: clk-pll: propagate the error from meson_clk_pll_set_rate()
  clk: meson: clk-pll: make "ret" a signed integer
  clk: meson: clk-pll: fix initializing the old rate (fallback) for a PLL

* clk-at91:
  clk: at91: Fix the declaration of the clocks
2021-02-16 14:09:08 -08:00
Stephen Boyd
ee6b84a3fc Merge branch 'clk-unused' into clk-next
- Remove efm32 clk driver
 - Remove tango4 clk driver
 - Remove zte zx clk driver
 - Remove sirf prima2/atlast clk drivers
 - Remove u300 clk driver

* clk-unused:
  clk: remove u300 driver
  clk: remove sirf prima2/atlas drivers
  clk: remove zte zx driver
  clk: remove tango4 driver
  clk: Drop unused efm32gg driver
2021-02-16 14:08:51 -08:00
Stephen Boyd
0d7a660bfe Merge branches 'clk-doc', 'clk-renesas', 'clk-allwinner', 'clk-rockchip' and 'clk-xilinx' into clk-next
- Convert Xilinx VCU clk driver to a proper clk provider driver
 - Expose Xilinx ZynqMP clk driver to more platforms

* clk-doc:
  linux/clk.h: use correct kernel-doc notation for 2 functions

* clk-renesas: (21 commits)
  clk: renesas: cpg-mssr: Fix formatting issues for 'smstpcr_saved's documentation
  clk: renesas: r8a779a0: Add RAVB clocks
  clk: renesas: r8a779a0: Add I2C clocks
  dt-bindings: clock: renesas: rcar-usb2-clock-sel: Add support for RZ/G2 M/N/H
  clk: renesas: r8a779a0: Add SYS-DMAC clocks
  clk: renesas: r8a779a0: Add SDHI support
  clk: renesas: rcar-gen3: Factor out CPG library
  clk: renesas: rcar-gen3: Remove cpg_quirks access when registering SD clock
  clk: renesas: r8a779a0: Add MSIOF clocks
  clk: renesas: r8a779a0: Add PFC/GPIO clocks
  clk: renesas: r8a779a0: Fix parent of CBFUSA clock
  clk: renesas: r8a779a0: Remove non-existent S2 clock
  clk: renesas: r8a779a0: Add HSCIF support
  clk: renesas: r8a779a0: Add RWDT clocks
  clk: renesas: r8a779a0: Add VSPX clock support
  clk: renesas: r8a779a0: Add VSPD clock support
  clk: renesas: r8a779a0: Add FCPVD clock support
  clk: renesas: r8a77995: Add TMU clocks
  clk: renesas: r8a77990: Add TMU clocks
  clk: renesas: r8a77965: Add TMU clocks
  ...

* clk-allwinner:
  clk: sunxi-ng: Add support for the Allwinner H616 CCU
  clk: sunxi-ng: Add support for the Allwinner H616 R-CCU
  dt-bindings: clk: sunxi-ccu: Add compatible string for Allwinner H616
  clk: sunxi-ng: h6: Fix clock divider range on some clocks
  clk: sunxi: clk-mod0: Demote non-conformant kernel-doc header
  clk: sunxi: clk-a10-ve: Demote obvious kernel-doc abuse
  clk: sunxi: clk-sunxi: Demote a bunch of non-conformant kernel-doc headers
  clk: sunxi-ng: h6: Fix CEC clock
  clk: sunxi-ng: h6-r: Add R_APB2_RSB clock and reset

* clk-rockchip:
  clk: rockchip: fix DPHY gate locations on rk3368
  clk: rockchip: use clock id for SCLK_VIP_OUT on rk3368
  clk: rockchip: add clock id for SCLK_VIP_OUT on rk3368
  clk: rockchip: use clock ids for PCLK_DPHYRX and PCLK_DPHYTX0 on rk3368
  clk: rockchip: add clock ids for PCLK_DPHYRX and PCLK_DPHYTX0 on rk3368
  clk: rockchip: Demote non-conformant kernel-doc header in half-divider
  clk: rockchip: Demote kernel-doc abuses to standard comment blocks in plls
  clk: rockchip: Remove unused/undocumented struct members from clk-cpu
  clk: rockchip: Demote non-conformant kernel-doc headers in main clock code

* clk-xilinx:
  clk: xilinx: move xlnx_vcu clock driver from soc
  soc: xilinx: vcu: fix alignment to open parenthesis
  soc: xilinx: vcu: fix repeated word the in comment
  soc: xilinx: vcu: use bitfields for register definition
  soc: xilinx: vcu: remove calculation of PLL configuration
  soc: xilinx: vcu: make the PLL configurable
  soc: xilinx: vcu: make pll post divider explicit
  soc: xilinx: vcu: implement clock provider for output clocks
  soc: xilinx: vcu: register PLL as fixed rate clock
  soc: xilinx: vcu: implement PLL disable
  soc: xilinx: vcu: add helpers for configuring PLL
  soc: xilinx: vcu: add helper to wait for PLL locked
  soc: xilinx: vcu: drop coreclk from struct xlnx_vcu
  clk: divider: fix initialization with parent_hw
  ARM: dts: vcu: define indexes for output clocks
  clk: axi-clkgen: use devm_platform_ioremap_resource() short-hand
  dt-bindings: clock: adi,axi-clkgen: add compatible string for ZynqMP support
  clk: clk-axiclkgen: add ZynqMP PFD and VCO limits
  clk: axi-clkgen: replace ARCH dependencies with driver deps
2021-02-16 14:06:43 -08:00
Daniel Palmer
d90afa62ac clk: mstar: msc313-mpll: Fix format specifier
The output dividers are unsigned int so the format specifier
should have been %u not %d.

Signed-off-by: Daniel Palmer <daniel@0x0f.com>
Link: https://lore.kernel.org/r/20210215115710.3762276-2-daniel@0x0f.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2021-02-16 12:52:28 -08:00
Daniel Palmer
93c89f03cb clk: mstar: Allow MStar clk drivers to be compile tested
Allow COMPILE_TEST to also build the MStar clk drivers
instead of only building them when ARCH_MSTARV7 is selected.

Signed-off-by: Daniel Palmer <daniel@0x0f.com>
Suggested-by: Stephen Boyd <sboyd@kernel.org>
Link: https://lore.kernel.org/r/20210215115710.3762276-1-daniel@0x0f.com
[sboyd@kernel.org: Drop regmap select too]
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2021-02-16 12:52:21 -08:00
Wasim Khan
fa4dd53eee clk: qoriq: use macros to generate pll_mask
Use macros to generate pll_mask to make code
more readable.

Signed-off-by: Wasim Khan <wasim.khan@nxp.com>
Link: https://lore.kernel.org/r/20210125142513.3919014-1-wasim.khan@oss.nxp.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2021-02-14 13:02:01 -08:00
Taniya Das
a3cc092196 clk: qcom: Add Global Clock controller (GCC) driver for SC7280
Add support for the global clock controller found on SC7280
based devices. This should allow most non-multimedia device
drivers to probe and control their clocks.

Signed-off-by: Taniya Das <tdas@codeaurora.org>
Link: https://lore.kernel.org/r/1612981579-17391-3-git-send-email-tdas@codeaurora.org
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2021-02-14 12:56:55 -08:00
Taniya Das
87a3d523b3 dt-bindings: clock: Add SC7280 GCC clock binding
Add device tree bindings for global clock subsystem clock
controller for Qualcomm Technology Inc's SC7280 SoCs.

Signed-off-by: Taniya Das <tdas@codeaurora.org>
Link: https://lore.kernel.org/r/1612981579-17391-2-git-send-email-tdas@codeaurora.org
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2021-02-14 12:56:55 -08:00
Taniya Das
fff2b9a651 clk: qcom: rpmh: Add support for RPMH clocks on SC7280
Add support for RPMH clocks on SC7280 SoCs.

Signed-off-by: Taniya Das <tdas@codeaurora.org>
Link: https://lore.kernel.org/r/1612977230-11566-3-git-send-email-tdas@codeaurora.org
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2021-02-14 12:56:55 -08:00
Taniya Das
75a81288db dt-bindings: clock: Add RPMHCC bindings for SC7280
Add bindings and update documentation for clock rpmh driver on SC7280.

Signed-off-by: Taniya Das <tdas@codeaurora.org>
Link: https://lore.kernel.org/r/1612977230-11566-2-git-send-email-tdas@codeaurora.org
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2021-02-14 12:56:55 -08:00
Vinod Koul
3fade948fb clk: qcom: gcc-sm8350: add gdsc
Add the GDSC found in GCC for SM8350 SoC

Signed-off-by: Vinod Koul <vkoul@kernel.org>
Link: https://lore.kernel.org/r/20210210161649.431741-1-vkoul@kernel.org
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2021-02-14 12:56:55 -08:00
AngeloGioacchino Del Regno
e16831bf40 dt-bindings: clock: Add QCOM SDM630 and SDM660 graphics clock bindings
Add device tree bindings for graphics clock controller for
Qualcomm Technology Inc's SDM630 and SDM660 SoCs.

Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org>
Link: https://lore.kernel.org/r/20210113183817.447866-10-angelogioacchino.delregno@somainline.org
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2021-02-14 12:56:55 -08:00
AngeloGioacchino Del Regno
79b5d1fc93 clk: qcom: Add SDM660 GPU Clock Controller (GPUCC) driver
The GPUCC manages the clocks for the Adreno GPU found on the
SDM630, SDM636, SDM660 SoCs.

Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org>
Link: https://lore.kernel.org/r/20210113183817.447866-9-angelogioacchino.delregno@somainline.org
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2021-02-14 12:56:54 -08:00
AngeloGioacchino Del Regno
eaf87e5661 clk: qcom: mmcc-msm8996: Migrate gfx3d clock to clk_rcg2_gfx3d
In the previous commit ("clk: qcom: rcg2: Stop hardcoding gfx3d pingpong
parent numbers") the gfx3d ping-pong ops (clk_gfx3d_ops) were
generalized in order to be able to reuse the same ops for more than just
one clock for one SoC: follow the change here in the MSM8996 MMCC.

Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org>
Link: https://lore.kernel.org/r/20210113183817.447866-7-angelogioacchino.delregno@somainline.org
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2021-02-14 12:56:54 -08:00
AngeloGioacchino Del Regno
7cbb78a99d clk: qcom: rcg2: Stop hardcoding gfx3d pingpong parent numbers
The function clk_gfx3d_determine_rate is selecting different PLLs
to manage the GFX3D clock source in a special way: this one needs
to be ping-pong'ed on different PLLs to ensure stability during
frequency switching (set a PLL rate, let it stabilize, switch the
RCG to the new PLL) and fast frequency transitions.

This technique is currently being used in the MSM8996 SoC and the
function was assuming that the parents were always at a specific
index in the parents list, which is TRUE, if we use this only on
the MSM8996 MMCC.
Unfortunately, MSM8996 is not the only SoC that needs to ping-pong
the graphics RCG, so choices are:
1. Make new special ops just to hardcode *again* other indexes,
   creating code duplication for (imo) no reason; or
2. Generalize this function, so that it becomes usable for a range
   of SoCs with slightly different ping-pong configuration.

In this commit, the second road was taken: define a new "special"
struct clk_rcg2_gfx3d, containing the ordered list of parents to
ping-pong the graphics clock on, and the "regular" rcg2 clock
structure in order to generalize the clk_gfx3d_determine_rate
function and make it working for other SoCs.

As for the function itself it is left with the assumption that we
need to ping-pong over three parents. The reasons for this are:
1. The initial model was MSM8996, which has 3 parents for the
   graphics clock pingpong;
2. The other example that was taken into consideration is the
   SDM630/636/660 SoC gpu clock controller, which is ping-ponging
   over two dynamic clocked and one fixed clock PLL.

Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org>
Link: https://lore.kernel.org/r/20210113183817.447866-6-angelogioacchino.delregno@somainline.org
[sboyd@kernel.org: Grow some local variables, drop do_div() usage in
favor of plain division, we're not dealing with a u64 here]
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2021-02-14 12:56:54 -08:00
AngeloGioacchino Del Regno
9502d488b1 dt-bindings: clock: Add support for the SDM630 and SDM660 mmcc
Document the multimedia clock controller found on SDM630/660.

Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org>
Link: https://lore.kernel.org/r/20210113183817.447866-5-angelogioacchino.delregno@somainline.org
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2021-02-14 12:56:54 -08:00
Martin Botka
5db3ae8b33 clk: qcom: Add SDM660 Multimedia Clock Controller (MMCC) driver
Add a driver for the multimedia clock controller found on SDM660
based devices. This should allow most multimedia device drivers
to probe and control their clocks.

Signed-off-by: Martin Botka <martin.botka@somainline.org>
Co-developed-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org>
[angelogioacchino.delregno@somainline.org: Cleaned up SDM630 clock fixups]
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org>
Link: https://lore.kernel.org/r/20210113183817.447866-4-angelogioacchino.delregno@somainline.org
[sboyd@kernel.org: Silence NULL pointer sparse warnings]
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2021-02-14 12:56:54 -08:00
AngeloGioacchino Del Regno
c365621838 clk: qcom: gcc-sdm660: Mark GPU CFG AHB clock as critical
This clock is critical for any access to the GPU: gating it will
crash the system when the GPU has been initialized (so, you cannot
gate it unless you deinit the Adreno completely).

So, to achieve a working state with GPU on, set the CLK_IS_CRITICAL
flag to this clock.

Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org>
Link: https://lore.kernel.org/r/20210113183817.447866-3-angelogioacchino.delregno@somainline.org
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2021-02-14 12:56:54 -08:00
AngeloGioacchino Del Regno
fe121bfe26 clk: qcom: gcc-sdm660: Mark MMSS NoC CFG AHB clock as critical
Similarly to MSM8998, any access to the MMSS depends on this clock.
Gating it will crash the system when RPMCC inits mmssnoc_axi_rpm_clk.

Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org>
Link: https://lore.kernel.org/r/20210113183817.447866-2-angelogioacchino.delregno@somainline.org
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2021-02-14 12:56:54 -08:00
AngeloGioacchino Del Regno
53748348a5 clk: qcom: gpucc-msm8998: Allow fabia gpupll0 rate setting
The GPU PLL0 is not a fixed PLL and the rate can be set on it:
this is necessary especially on boards which bootloader is setting
a very low rate on this PLL before booting Linux, which would be
unsuitable for postdividing to reach the maximum allowed Adreno GPU
frequency of 710MHz (or, actually, even 670MHz..) on this SoC.

To allow setting rates on the GPU PLL0, also define VCO boundaries
and set the CLK_SET_RATE_PARENT flag to the GPU PLL0 postdivider.

With this change, the Adreno GPU is now able to scale through all
the available frequencies.

Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org>
Link: https://lore.kernel.org/r/20210114221059.483390-12-angelogioacchino.delregno@somainline.org
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2021-02-14 12:56:54 -08:00
AngeloGioacchino Del Regno
a59c16c80b clk: qcom: gpucc-msm8998: Add resets, cxc, fix flags on gpu_gx_gdsc
The GPU GX GDSC has GPU_GX_BCR reset and gfx3d_clk CXC, as stated
on downstream kernels (and as verified upstream, because otherwise
random lockups happen).
Also, add PWRSTS_RET and NO_RET_PERIPH: also as found downstream,
and also as verified here, to avoid GPU related lockups it is
necessary to force retain mem, but *not* peripheral when enabling
this GDSC (and, of course, the inverse on disablement).

With this change, the GPU finally works flawlessly on my four
different MSM8998 devices from two different manufacturers.

Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org>
Link: https://lore.kernel.org/r/20210114221059.483390-11-angelogioacchino.delregno@somainline.org
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2021-02-14 12:56:54 -08:00
AngeloGioacchino Del Regno
785c02eb35 clk: qcom: gdsc: Implement NO_RET_PERIPH flag
In some rare occasions, we want to only set the RETAIN_MEM bit, but
not the RETAIN_PERIPH one: this is seen on at least SDM630/636/660's
GPU-GX GDSC, where unsetting and setting back the RETAIN_PERIPH bit
will generate chaos and panics during GPU suspend time (mainly, the
chaos is unaligned access).

For this reason, introduce a new NO_RET_PERIPH flag to the GDSC
driver to address this corner case.

Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org>
Link: https://lore.kernel.org/r/20210113183817.447866-8-angelogioacchino.delregno@somainline.org
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2021-02-14 12:56:54 -08:00
Daniel Palmer
bef7a78da7 clk: mstar: MStar/SigmaStar MPLL driver
This adds a basic driver for the MPLL block found in MStar/SigmaStar
ARMv7 SoCs.

Currently this driver is only good for calculating the rates of it's
outputs and the actual configuration must be done before the kernel
boots. Usually this is done even before u-boot starts.

This driver targets the MPLL block found in the MSC313/MSC313E but
there is no documentation this chip so the register descriptions for
the another MStar chip the MST786 were used as they seem to match.

Signed-off-by: Daniel Palmer <daniel@0x0f.com>
Link: https://lore.kernel.org/r/20210211052206.2955988-5-daniel@0x0f.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2021-02-14 12:38:00 -08:00
Daniel Palmer
0b9266d295 clk: fixed: add devm helper for clk_hw_register_fixed_factor()
Add a devm helper for clk_hw_register_fixed_factor() so that drivers that internally
register fixed factor clocks for things like dividers don't need to manually unregister
them on remove or if probe fails.

Signed-off-by: Daniel Palmer <daniel@0x0f.com>
Link: https://lore.kernel.org/r/20210211052206.2955988-4-daniel@0x0f.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2021-02-14 12:37:48 -08:00
Daniel Palmer
4f83b5233f dt-bindings: clk: mstar msc313 mpll binding description
Add a binding description for the MStar/SigmaStar MPLL clock block.

Signed-off-by: Daniel Palmer <daniel@0x0f.com>
Link: https://lore.kernel.org/r/20210211052206.2955988-3-daniel@0x0f.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2021-02-14 12:37:45 -08:00
Daniel Palmer
1d895931cb dt-bindings: clk: mstar msc313 mpll binding header
Simple header to document the relationship between the MPLL outputs
and which divider they come from.

Output 0 is missing because it should not be consumed.

Signed-off-by: Daniel Palmer <daniel@0x0f.com>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20210211052206.2955988-2-daniel@0x0f.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2021-02-14 12:37:40 -08:00
Dinh Nguyen
a0f9819cbe clk: socfpga: agilex: add clock driver for eASIC N5X platform
Add support for Intel's eASIC N5X platform. The clock manager driver for
the N5X is very similar to the Agilex platform, we can re-use most of
the Agilex clock driver.

This patch makes the necessary changes for the driver to differentiate
between the Agilex and the N5X platforms.

Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
Link: https://lore.kernel.org/r/20210212143059.478554-2-dinguyen@kernel.org
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2021-02-12 13:04:58 -08:00
Dinh Nguyen
2bea59d388 dt-bindings: documentation: add clock bindings information for eASIC N5X
Document the Agilex clock bindings, and add the clock header file. The
clock header is an enumeration of all the different clocks on the eASIC
N5X platform.

Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
Link: https://lore.kernel.org/r/20210212143059.478554-1-dinguyen@kernel.org
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2021-02-12 13:04:58 -08:00
Matti Vaittinen
ddddfafd94 clk: BD718x7: Do not depend on parent driver data
The bd718x7 only needs a regmap from parent device. This can be
obtained by call to dev_get_regmap. Do not require parent to
populate the driver data for this.

Signed-off-by: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>
Link: https://lore.kernel.org/r/20210105123028.GA3409663@localhost.localdomain
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2021-02-11 19:21:47 -08:00
Ryan Chen
6286ce1e3e clk: aspeed: Fix APLL calculate formula from ast2600-A2
Starting from A2, the A-PLL calculation has changed. Use the
existing formula for A0/A1 and the new formula for A2 onwards.

Fixes: d3d04f6c33 ("clk: Add support for AST2600 SoC")
Signed-off-by: Ryan Chen <ryan_chen@aspeedtech.com>
Link: https://lore.kernel.org/r/20210119061715.6043-1-ryan_chen@aspeedtech.com
Reviewed-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2021-02-11 12:36:04 -08:00
Saeed Nowshadi
d9d4944d36 clk: si570: Skip NVM to RAM recall operation if an optional property is set
Recalling NVM data into RAM during probe() initiates a re-calibration of
the clock. If the clock is already in-use, the recall operation can cause
a glitch on the frequency out. At power on, the factory data are loaded
from NVM into RAM by default. If the clock frequency has been changed
since power on, the recall operation can be used to re-initialize the clock
to factory setting.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Signed-off-by: Saeed Nowshadi <saeed.nowshadi@xilinx.com>
Link: https://lore.kernel.org/r/1612496104-3437-3-git-send-email-saeed.nowshadi@xilinx.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2021-02-11 12:13:50 -08:00
Saeed Nowshadi
3dff4becef dt-bindings: clock: si570: Add 'silabs,skip-recall' property
Add an optional property so the driver can skip calling the NVM->RAM
recall operation during probe().

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Signed-off-by: Saeed Nowshadi <saeed.nowshadi@xilinx.com>
Link: https://lore.kernel.org/r/1612496104-3437-2-git-send-email-saeed.nowshadi@xilinx.com
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2021-02-11 12:13:50 -08:00
Adam Ford
f3d661d6b4 clk: vc5: Add support for optional load capacitance
There are two registers which can set the load capacitance for
XTAL1 and XTAL2. These are optional registers when using an
external crystal.  Parse the device tree and set the
corresponding registers accordingly.

Signed-off-by: Adam Ford <aford173@gmail.com>
Link: https://lore.kernel.org/r/20210207185140.3653350-2-aford173@gmail.com
Reviewed-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2021-02-11 12:09:34 -08:00
Adam Ford
31e7aa7ed7 dt-bindings: clk: versaclock5: Add optional load capacitance property
There are two registers which can set the load capacitance for
XTAL1 and XTAL2. These are optional registers when using an
external crystal.  Since XTAL1 and XTAL2 will set to the same value,
update the binding to support a single property called
xtal-load-femtofarads.

Signed-off-by: Adam Ford <aford173@gmail.com>
Link: https://lore.kernel.org/r/20210207185140.3653350-1-aford173@gmail.com
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2021-02-11 12:09:31 -08:00
Lee Jones
bf2244ba9d clk: zynq: clkc: Remove various instances of an unused variable 'clk'
Fixes the following W=1 kernel build warning(s):

 drivers/clk/zynq/clkc.c: In function ‘zynq_clk_register_fclk’:
 drivers/clk/zynq/clkc.c:106:14: warning: variable ‘clk’ set but not used [-Wunused-but-set-variable]
 drivers/clk/zynq/clkc.c: In function ‘zynq_clk_register_periph_clk’:
 drivers/clk/zynq/clkc.c:179:14: warning: variable ‘clk’ set but not used [-Wunused-but-set-variable]
 drivers/clk/zynq/clkc.c: In function ‘zynq_clk_setup’:
 drivers/clk/zynq/clkc.c:220:14: warning: variable ‘clk’ set but not used [-Wunused-but-set-variable]

Cc: Michael Turquette <mturquette@baylibre.com>
Cc: Stephen Boyd <sboyd@kernel.org>
Cc: Michal Simek <michal.simek@xilinx.com>
Cc: "Sören Brinkmann" <soren.brinkmann@xilinx.com>
Cc: linux-clk@vger.kernel.org
Cc: linux-arm-kernel@lists.infradead.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20210120093040.1719407-21-lee.jones@linaro.org
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2021-02-11 11:56:07 -08:00
Lee Jones
0c1d46d3a7 clk: versatile: clk-icst: Fix worthy struct documentation block
Also demote non-worthy header to standard comment block.

Fixes the following W=1 kernel build warning(s):

 drivers/clk/versatile/clk-icst.c:53: warning: Function parameter or member 'map' not described in 'clk_icst'
 drivers/clk/versatile/clk-icst.c:53: warning: Function parameter or member 'vcoreg_off' not described in 'clk_icst'
 drivers/clk/versatile/clk-icst.c:53: warning: Function parameter or member 'lockreg_off' not described in 'clk_icst'
 drivers/clk/versatile/clk-icst.c:435: warning: cannot understand function prototype: 'const struct icst_params icst525_apcp_cm_params = '

Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Michael Turquette <mturquette@baylibre.com>
Cc: Stephen Boyd <sboyd@kernel.org>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-clk@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20210120093040.1719407-20-lee.jones@linaro.org
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2021-02-11 11:56:07 -08:00
Lee Jones
d52848c3f6 clk: ti: gate: Fix possible doc-rot in 'omap36xx_gate_clk_enable_with_hsdiv_restore'
Fixes the following W=1 kernel build warning(s):

 drivers/clk/ti/gate.c:67: warning: Function parameter or member 'hw' not described in 'omap36xx_gate_clk_enable_with_hsdiv_restore'
 drivers/clk/ti/gate.c:67: warning: Excess function parameter 'clk' description in 'omap36xx_gate_clk_enable_with_hsdiv_restore'

Cc: Tero Kristo <kristo@kernel.org>
Cc: Michael Turquette <mturquette@baylibre.com>
Cc: Stephen Boyd <sboyd@kernel.org>
Cc: linux-omap@vger.kernel.org
Cc: linux-clk@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20210120093040.1719407-17-lee.jones@linaro.org
Reviewed-by: Tero Kristo <kristo@kernel.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2021-02-11 11:56:07 -08:00
Lee Jones
975b3edd55 clk: ti: dpll: Fix misnaming of '_register_dpll()'s 'user' parameter
Fixes the following W=1 kernel build warning(s):

 drivers/clk/ti/dpll.c:163: warning: Function parameter or member 'user' not described in '_register_dpll'
 drivers/clk/ti/dpll.c:163: warning: Excess function parameter 'hw' description in '_register_dpll'

Cc: Tero Kristo <kristo@kernel.org>
Cc: Michael Turquette <mturquette@baylibre.com>
Cc: Stephen Boyd <sboyd@kernel.org>
Cc: linux-omap@vger.kernel.org
Cc: linux-clk@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20210120093040.1719407-16-lee.jones@linaro.org
Reviewed-by: Tero Kristo <kristo@kernel.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2021-02-11 11:56:07 -08:00
Lee Jones
60b185f111 clk: ti: clockdomain: Fix description for 'omap2_init_clk_clkdm's hw param
Fixes the following W=1 kernel build warning(s):

 drivers/clk/ti/clockdomain.c:107: warning: Function parameter or member 'hw' not described in 'omap2_init_clk_clkdm'
 drivers/clk/ti/clockdomain.c:107: warning: Excess function parameter 'clk' description in 'omap2_init_clk_clkdm'

Cc: Tero Kristo <kristo@kernel.org>
Cc: Michael Turquette <mturquette@baylibre.com>
Cc: Stephen Boyd <sboyd@kernel.org>
Cc: linux-omap@vger.kernel.org
Cc: linux-clk@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20210120093040.1719407-14-lee.jones@linaro.org
Reviewed-by: Tero Kristo <kristo@kernel.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2021-02-11 11:56:07 -08:00
Lee Jones
4f71bdcbd6 clk: st: clkgen-fsyn: Fix worthy struct documentation demote partially filled one
Fixes the following W=1 kernel build warning(s):

 drivers/clk/st/clkgen-fsyn.c:186: warning: Function parameter or member 'data' not described in 'st_clk_quadfs_pll'
 drivers/clk/st/clkgen-fsyn.c:466: warning: Function parameter or member 'regs_base' not described in 'st_clk_quadfs_fsynth'
 drivers/clk/st/clkgen-fsyn.c:466: warning: Function parameter or member 'lock' not described in 'st_clk_quadfs_fsynth'
 drivers/clk/st/clkgen-fsyn.c:466: warning: Function parameter or member 'data' not described in 'st_clk_quadfs_fsynth'
 drivers/clk/st/clkgen-fsyn.c:466: warning: Function parameter or member 'chan' not described in 'st_clk_quadfs_fsynth'
 drivers/clk/st/clkgen-fsyn.c:466: warning: Function parameter or member 'md' not described in 'st_clk_quadfs_fsynth'
 drivers/clk/st/clkgen-fsyn.c:466: warning: Function parameter or member 'pe' not described in 'st_clk_quadfs_fsynth'
 drivers/clk/st/clkgen-fsyn.c:466: warning: Function parameter or member 'sdiv' not described in 'st_clk_quadfs_fsynth'

Cc: Michael Turquette <mturquette@baylibre.com>
Cc: Stephen Boyd <sboyd@kernel.org>
Cc: Kees Cook <keescook@chromium.org>
Cc: Stephen Gallimore <stephen.gallimore@st.com>
Cc: Pankaj Dev <pankaj.dev@st.com>
Cc: linux-clk@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20210120093040.1719407-13-lee.jones@linaro.org
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2021-02-11 11:56:06 -08:00
Lee Jones
c13726171f clk: st: clkgen-pll: Demote unpopulated kernel-doc header
And remove an incorrect entry.

Fixes the following W=1 kernel build warning(s):

 drivers/clk/st/clkgen-pll.c:142: warning: cannot understand function prototype: 'struct clkgen_pll '

Cc: Michael Turquette <mturquette@baylibre.com>
Cc: Stephen Boyd <sboyd@kernel.org>
Cc: Stephen Gallimore <stephen.gallimore@st.com>
Cc: Pankaj Dev <pankaj.dev@st.com>
Cc: linux-clk@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20210120093040.1719407-12-lee.jones@linaro.org
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2021-02-11 11:56:06 -08:00
Lee Jones
793eb69c96 clk: mvebu: ap-cpu-clk: Demote non-conformant kernel-doc header
Not much effort has been put into this one.

Demote it for the time being at least.

Fixes the following W=1 kernel build warning(s):

 drivers/clk/mvebu/ap-cpu-clk.c:52: warning: Function parameter or member 'ratio_state_reg' not described in 'cpu_dfs_regs'
 drivers/clk/mvebu/ap-cpu-clk.c:52: warning: Function parameter or member 'divider_mask' not described in 'cpu_dfs_regs'
 drivers/clk/mvebu/ap-cpu-clk.c:52: warning: Function parameter or member 'cluster_offset' not described in 'cpu_dfs_regs'
 drivers/clk/mvebu/ap-cpu-clk.c:52: warning: Function parameter or member 'force_mask' not described in 'cpu_dfs_regs'
 drivers/clk/mvebu/ap-cpu-clk.c:52: warning: Function parameter or member 'divider_offset' not described in 'cpu_dfs_regs'
 drivers/clk/mvebu/ap-cpu-clk.c:52: warning: Function parameter or member 'divider_ratio' not described in 'cpu_dfs_regs'
 drivers/clk/mvebu/ap-cpu-clk.c:52: warning: Function parameter or member 'ratio_offset' not described in 'cpu_dfs_regs'
 drivers/clk/mvebu/ap-cpu-clk.c:52: warning: Function parameter or member 'ratio_state_offset' not described in 'cpu_dfs_regs'
 drivers/clk/mvebu/ap-cpu-clk.c:52: warning: Function parameter or member 'ratio_state_cluster_offset' not described in 'cpu_dfs_regs'

Cc: Michael Turquette <mturquette@baylibre.com>
Cc: Stephen Boyd <sboyd@kernel.org>
Cc: Julia Lawall <Julia.Lawall@inria.fr>
Cc: Omri Itach <omrii@marvell.com>
Cc: Gregory Clement <gregory.clement@bootlin.com>
Cc: linux-clk@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20210120093040.1719407-10-lee.jones@linaro.org
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2021-02-11 11:56:06 -08:00
Lee Jones
1609634d41 clk: socfpga: clk-pll-a10: Remove set but unused variable 'rc'
Fixes the following W=1 kernel build warning(s):

 drivers/clk/socfpga/clk-pll-a10.c: In function ‘__socfpga_pll_init’:
 drivers/clk/socfpga/clk-pll-a10.c:76:6: warning: variable ‘rc’ set but not used [-Wunused-but-set-variable]

Cc: Dinh Nguyen <dinguyen@kernel.org>
Cc: Michael Turquette <mturquette@baylibre.com>
Cc: Stephen Boyd <sboyd@kernel.org>
Cc: linux-clk@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20210120093040.1719407-9-lee.jones@linaro.org
Acked-by: Dinh Nguyen <dinguyen@kernel.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2021-02-11 11:56:06 -08:00
Lee Jones
75fddccbca clk: socfpga: clk-pll: Remove unused variable 'rc'
Fixes the following W=1 kernel build warning(s):

 drivers/clk/socfpga/clk-pll.c: In function ‘__socfpga_pll_init’:
 drivers/clk/socfpga/clk-pll.c:83:6: warning: variable ‘rc’ set but not used [-Wunused-but-set-variable]

Cc: Dinh Nguyen <dinguyen@kernel.org>
Cc: Michael Turquette <mturquette@baylibre.com>
Cc: Stephen Boyd <sboyd@kernel.org>
Cc: linux-clk@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20210120093040.1719407-8-lee.jones@linaro.org
Acked-by: Dinh Nguyen <dinguyen@kernel.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2021-02-11 11:56:06 -08:00
Lee Jones
487dc7bb6a clk: sifive: fu540-prci: Declare static const variable 'prci_clk_fu540' where it's used
Fixes the following W=1 kernel build warning(s):

 drivers/clk/sifive/fu540-prci.h:16:35: warning: ‘prci_clk_fu540’ defined but not used [-Wunused-const-variable=]
 drivers/clk/sifive/fu540-prci.h:16:35: warning: ‘prci_clk_fu540’ defined but not used [-Wunused-const-variable=]

Cc: Michael Turquette <mturquette@baylibre.com>
Cc: Stephen Boyd <sboyd@kernel.org>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Pragnesh Patel <Pragnesh.patel@sifive.com>
Cc: Zong Li <zong.li@sifive.com>
Cc: linux-clk@vger.kernel.org
Cc: linux-riscv@lists.infradead.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20210120093040.1719407-7-lee.jones@linaro.org
Acked-by: Palmer Dabbelt <palmerdabbelt@google.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2021-02-11 11:56:06 -08:00
Lee Jones
ee70d49abf clk: bcm: clk-iproc-pll: Demote kernel-doc abuse
Fixes the following W=1 kernel build warning(s):

 drivers/clk/bcm/clk-iproc-pll.c:712: warning: Function parameter or member 'pll' not described in 'iproc_pll_sw_cfg'

Cc: Michael Turquette <mturquette@baylibre.com>
Cc: Stephen Boyd <sboyd@kernel.org>
Cc: Ray Jui <rjui@broadcom.com>
Cc: Scott Branden <sbranden@broadcom.com>
Cc: bcm-kernel-feedback-list@broadcom.com
Cc: linux-clk@vger.kernel.org
Cc: linux-arm-kernel@lists.infradead.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20210120093040.1719407-6-lee.jones@linaro.org
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2021-02-11 11:56:06 -08:00
Lee Jones
7db20bc17f clk: zynqmp: divider: Add missing description for 'max_div'
Fixes the following W=1 kernel build warning(s):

 drivers/clk/zynqmp/divider.c:46: warning: Function parameter or member 'max_div' not described in 'zynqmp_clk_divider'

Cc: Michael Turquette <mturquette@baylibre.com>
Cc: Stephen Boyd <sboyd@kernel.org>
Cc: Michal Simek <michal.simek@xilinx.com>
Cc: Rajan Vaja <rajan.vaja@xilinx.com>
Cc: linux-clk@vger.kernel.org
Cc: linux-arm-kernel@lists.infradead.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20210126124540.3320214-22-lee.jones@linaro.org
Acked-by: Michal Simek <michal.simek@xilinx.com>
Reviewed-by: Tero Kristo <kristo@kernel.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2021-02-11 11:56:06 -08:00
Lee Jones
f2ad937b62 clk: spear: Move prototype to accessible header
Fixes the following W=1 kernel build warning(s):

 drivers/clk/spear/spear1310_clock.c:385:13: warning: no previous prototype for ‘spear1310_clk_init’ [-Wmissing-prototypes]
 drivers/clk/spear/spear1340_clock.c:442:13: warning: no previous prototype for ‘spear1340_clk_init’ [-Wmissing-prototypes]

Cc: Viresh Kumar <vireshk@kernel.org>
Cc: Shiraz Hashim <shiraz.linux.kernel@gmail.com>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Rajeev Kumar <rajeev-dlh.kumar@st.com>
Cc: linux-arm-kernel@lists.infradead.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20210126124540.3320214-20-lee.jones@linaro.org
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2021-02-11 11:56:06 -08:00